Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.assemblies |
Provides classes and interfaces for Assemblies.
|
nxopen.bodydes |
Provides classes and interfaces for Body Design.
|
nxopen.cae |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.subdivision |
Provides classes and interfaces for Subdivision Body feature.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for Vehicle Design.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.linedesigner |
Provides classes and interfaces for Line Designer.
|
nxopen.mechatronics |
Provides classes and interfaces for Mechatronics.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.userdefinedtemplate |
Provides classes and interfaces for User Defined Template.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Measure
Represents a measurement feature
To create an instance of this use MeasureBodies ,
MeasureDistance ,
MeasureAngle ,
MeasureFaces , and
MeasureLength Created in NX4.0.0 |
interface |
SketchIntersectionCurve
Represents a Intersection Curve operation inside sketch
To create an instance of this object use SketchIntersectionCurveBuilder Created in NX5.0.0 |
interface |
SketchIntersectionPoint
Represents an Intersection Point operation inside sketch
To create an instance of this object use SketchIntersectionPointBuilder Created in NX5.0.0 |
Modifier and Type | Field and Description |
---|---|
Feature |
Part.FeatureUpdateStatus.feature
the feature
|
Feature |
FaceConnectedBlendRule.DefiningData.feature
Feature which creates this rule
|
Feature |
FaceAllBlendRule.DefiningData.feature
Feature which creates this rule
|
Feature[] |
Selection.SelectFeaturesData.featureArray
The selected features
|
Feature[] |
FollowFilletRule.Data.features
Features whose curves are used to create this rule
|
Feature[] |
CurveFeatureTangentRule.Data.features
Feaures whose tangent curves are used to create this rule
|
Feature[] |
CurveFeatureChainRule.Data.features
Features whose curves are used to create this rule
|
Modifier and Type | Method and Description |
---|---|
Feature |
Part.currentFeature()
Returns the current feature.
|
Feature |
Sketch.feature()
Returns the feature associated with this sketch
License requirements: None. |
Feature |
DatumPlane.feature()
Returns the feature associated with the datum plane.
|
Feature |
DatumAxis.feature()
Returns the feature associated with the datum axis.
|
Feature[] |
FeaturePointsRule.getData()
Gets the data for the feature points rule:
FeaturePointsRule
License requirements: gateway ("UG GATEWAY") Created in NX5.0.2 |
Feature[] |
FaceFeatureRule.getData()
Gets the data for the face feature rule:
FaceFeatureRule
License requirements: gateway ("UG GATEWAY") Created in NX4.0.0 |
Feature[] |
EdgeFeatureRule.getData()
Gets the data for the edge feature rule:
EdgeFeatureRule
License requirements: gateway ("UG GATEWAY") Created in NX3.0.0 |
Feature[] |
CurveFeatureRule.getData()
Gets the data for the curve feature rule:
CurveFeatureRule
License requirements: gateway ("UG GATEWAY") Created in NX3.0.0 |
Feature[] |
BodyFeatureRule.getData()
Gets the data for the body feature rule:
BodyFeatureRule
License requirements: gateway ("UG GATEWAY") Created in NX7.5.0 |
Feature[] |
Body.getFeatures()
Returns the features used to construct the body
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
Expression.getOwningFeature()
Returns the feature that created the supplied expression.
|
Feature |
Expression.getOwningRpoFeature()
Returns the feature whose rpo_transform created the supplied positioning dimension expression.
|
Feature[] |
Expression.getUsingFeatures()
Returns an array of the features that use the supplied expression.
|
Modifier and Type | Method and Description |
---|---|
SketchEvaluator |
SketchEvaluatorCollection.create(Feature varsweep)
Create an
SketchEvaluator without parameters. |
Plane |
PlaneCollection.createPlane(Feature datum)
Creates a
Plane using a datum plane feature. |
SketchProjectBuilder |
SketchCollection.createProjectBuilder(Feature operation)
Creates a
SketchProjectBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT") Created in NX5.0.0 |
BodyFeatureRule |
ScRuleFactory.createRuleBodyFeature(Feature[] features)
|
BodyFeatureRule |
ScRuleFactory.createRuleBodyFeature(Feature[] features,
boolean includeSheetBodies)
Creates selection intent rule:
BodyFeatureRule with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY") . |
BodyFeatureRule |
ScRuleFactory.createRuleBodyFeature(Feature[] features,
boolean includeSheetBodies,
DisplayableObject partOccurrence)
Creates selection intent rule:
BodyFeatureRule for the given feature from a part occurrence, with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY") . |
BodyFeatureRule |
ScRuleFactory.createRuleBodyFeature(Feature[] features,
DisplayableObject partOccurrence)
Creates selection intent rule:
BodyFeatureRule for the given feature from a part occurrence. |
CurveFeatureRule |
ScRuleFactory.createRuleCurveFeature(Feature[] features)
Creates selection intent rule:
CurveFeatureRule
License requirements: gateway ("UG GATEWAY") Created in NX3.0.0 |
CurveFeatureRule |
ScRuleFactory.createRuleCurveFeature(Feature[] features,
DisplayableObject partOccurrence)
Creates selection intent rule:
CurveFeatureRule for the given feature from a part occurrence. |
CurveFeatureChainRule |
ScRuleFactory.createRuleCurveFeatureChain(Feature[] features,
Curve seedCurve,
Curve endCurve,
boolean isFromSeedStart,
double gapTolerance)
Creates selection intent rule:
CurveFeatureChainRule
License requirements: gateway ("UG GATEWAY") Created in NX3.0.0 |
CurveFeatureTangentRule |
ScRuleFactory.createRuleCurveFeatureTangent(Feature[] features,
Curve seedCurve,
Curve endCurve,
boolean isFromSeedStart,
double angleTolerance,
double gapTolerance)
Creates selection intent rule:
CurveFeatureTangentRule
License requirements: gateway ("UG GATEWAY") Created in NX3.0.0 |
EdgeFeatureRule |
ScRuleFactory.createRuleEdgeFeature(Feature[] features)
Creates selection intent rule:
EdgeFeatureRule
License requirements: gateway ("UG GATEWAY") Created in NX3.0.0 |
EdgeFeatureRule |
ScRuleFactory.createRuleEdgeFeature(Feature[] features,
DisplayableObject partOccurrence)
Creates selection intent rule:
EdgeFeatureRule for the given feature from a part occurrence. |
FaceAllBlendRule |
ScRuleFactory.createRuleFaceAllBlend(Body body,
Feature feature)
Creates selection intent rule:
FaceAllBlendRule
License requirements: gateway ("UG GATEWAY") Created in NX8.5.0 |
FaceConnectedBlendRule |
ScRuleFactory.createRuleFaceConnectedBlend(Face seedFace,
boolean includeBlendLike,
boolean includeUnlabeledBlend,
Feature feature)
Creates selection intent rule:
FaceConnectedBlendRule
License requirements: gateway ("UG GATEWAY") Created in NX10.0.0 |
FaceConnectedBlendRule |
ScRuleFactory.createRuleFaceConnectedBlend(Face seedFace,
boolean includeBlendLike,
Feature feature)
Creates selection intent rule:
FaceConnectedBlendRule
License requirements: gateway ("UG GATEWAY") Created in NX8.5.0 |
FaceFeatureRule |
ScRuleFactory.createRuleFaceFeature(Feature[] features)
Creates selection intent rule:
FaceFeatureRule
License requirements: gateway ("UG GATEWAY") Created in NX4.0.0 |
FaceFeatureRule |
ScRuleFactory.createRuleFaceFeature(Feature[] features,
DisplayableObject partOccurrence)
Creates selection intent rule:
FaceFeatureRule for the given feature from a part occurrence. |
FeaturePointsRule |
ScRuleFactory.createRuleFeaturePoints(Feature[] features)
Creates selection intent rule:
FeaturePointsRule
License requirements: gateway ("UG GATEWAY") Created in NX5.0.2 |
FeaturePointsRule |
ScRuleFactory.createRuleFeaturePoints(Feature[] features,
DisplayableObject partOccurrence)
Creates selection intent rule:
FeaturePointsRule for the given feature from a part occurrence. |
FollowFilletRule |
ScRuleFactory.createRuleFollowFillet(Feature[] features,
Body[] bodies,
ICurve[] basicCurves,
ICurve seedWireframe,
ICurve endWireframe,
boolean isFromSeedStart,
Point3d seedPoint,
double gapTolerance,
double angleTolerance,
FollowFilletRuleType method)
Creates selection intent rule:
FollowFilletRule
License requirements: gateway ("UG GATEWAY") Created in NX4.0.0 |
FollowFilletRule |
ScRuleFactory.createRuleFollowFillet(Feature[] features,
Body[] bodies,
ICurve[] basicCurves,
ICurve seedWireframe,
Point3d seedPoint,
double gapTolerance,
double angleTolerance,
FollowFilletRuleType method)
Creates selection intent rule:
FollowFilletRule with stop at intersection option ON
License requirements: gateway ("UG GATEWAY") Created in NX7.5.0 |
void |
Information.displayFeatureDetails(Feature feature,
Information.DisplayFeatureType type)
Displays relevant information about features created while
generating a 3-D model in the
ListingWindow . |
Constructor and Description |
---|
FeatureUpdateStatus(Feature featureInitial,
String statusInitial,
String errorMessageInitial)
Constructor for the FeatureUpdateStatus object.
|
Modifier and Type | Method and Description |
---|---|
void |
HoleCalloutSettingsBuilder.resetFromFeature(Feature feature,
Component partOccurrence,
View view,
Point3d pickPoint)
Reset the builder data based on a feature if the feature is a hole feature.
|
Modifier and Type | Method and Description |
---|---|
void |
RelinkerBuilder.relinkWaveFeature(Part partID,
Feature featID,
NXObject sourceID)
Relinks the wave feature using the specific geometry source from the specific part in case of multiple geometry sources.
|
Modifier and Type | Interface and Description |
---|---|
interface |
OnestepUnform
Represents a onestep unform feature
To create or edit an instance of this class, use OnestepUnformBuilder Created in NX5.0.0 |
Modifier and Type | Method and Description |
---|---|
OnestepUnformBuilder |
OnestepUnformCollection.createOnestepBuilder(Feature onestepunform)
Creates an Onestep Unform builder.
|
Modifier and Type | Method and Description |
---|---|
Feature |
CADModeling.createSurfaceFromPolygonFace(Part cadPart,
CAEFace polygonFace)
CREATE cad surface from polygon face in part
License requirements: nx_masterfem ("Finite Element Modeling") . |
Modifier and Type | Method and Description |
---|---|
SurfaceRegions |
CAMSetup.createSurfaceRegions(Feature feature)
Creates a surface regions builder
License requirements: cam_base ("CAM BASE") . |
Modifier and Type | Interface and Description |
---|---|
interface |
CastRelief
Represents a cast relief feature
To create or edit an instance of this class, use CastReliefBuilder Created in NX6.0.0 |
interface |
ClampingSlot
Represents a clamping slot feature
To create or edit an instance of this class, use ClampingSlotBuilder Created in NX6.0.0 |
interface |
Clearance
Represents a die design clearance feature.
|
interface |
DieShoe
Represents a die shoe feature
To create or edit an instance of this class, use DieShoeBuilder Created in NX6.0.0 |
interface |
DrawBead
Represents a draw bead feature.
|
interface |
FillArea
Represents a die design fill area feature.
|
interface |
FingerClearanceNotch
Represents a die design finger clearance notch feature.
|
interface |
HandlingCore
Represents a die design handling core feature.
|
interface |
Heelpost
Represents a heelpost feature
To create or edit an instance of this class, use HeelpostBuilder Created in NX6.0.0 |
interface |
Keyway
Represents a keyway feature
To create or edit an instance of this class, use KeywayBuilder Created in NX6.0.0 |
interface |
MachineRelief
Represents a die design machine relief feature.
|
interface |
SpringbackCompensation
Represents a springback compensation feature.
|
interface |
Tip
Represents a Tip feature.
|
interface |
TrimFlangeDieAssistant
Represents a trim/flange die assistant
To create or edit an instance of this class, use TrimFlangeDieAssistantBuilder Created in NX5.0.0 |
Modifier and Type | Method and Description |
---|---|
Feature |
OutputCurvesBuilder.referenceFeature()
Returns the reference feature - must be either a die section or form task feature
License requirements: die_engineering ("DIE ENGINEERING") . |
Feature |
FaceSheetBuilder.stampingOutput()
Returns the stamping output feature of the Face Sheet
License requirements: die_engineering ("DIE ENGINEERING") . |
Feature |
TrimTaskBuilder.tippedProduct()
Returns the tipped product of the trim task
License requirements: die_engineering ("DIE ENGINEERING") . |
Feature |
PierceTaskBuilder.tippedProduct()
Returns the tipped product of the pierce task
License requirements: die_engineering ("DIE ENGINEERING") . |
Feature |
FormTaskBuilder.tippedProduct()
Returns the tipped product of the form task.
|
Feature |
FlangeTaskBuilder.tippedProduct()
Returns the tipped product of the flange task
License requirements: die_engineering ("DIE ENGINEERING") . |
Feature |
FillBuilder.tippedProduct()
Returns the tipped product of the area fill
License requirements: die_engineering ("DIE ENGINEERING") . |
Modifier and Type | Method and Description |
---|---|
TrimTaskBuilder.CheckAndMovePlanesData |
TrimTaskBuilder.checkAndMovePlanes(Feature origTip,
Feature targetTip,
ISurface origStartPlaneTag,
ISurface origEndPlaneTag)
Move end planes if the position of Trim Task is changed.
|
AddendumSectionBuilder |
DieCollection.createAddendumSectionBuilder(Feature addSection)
Creates/Edits the addendum section builder.
|
AddSurfBuilder |
DieCollection.createAddSurfBuilder(Feature addSurf)
Creates a
AddSurfBuilder . |
DieDirectionBuilder |
DieCollection.createDieDirection(Feature feature)
Creates a
DieDirectionBuilder . |
DieLocationsBuilder |
DieCollection.createDieLocations(Feature feature,
boolean allowSelection,
boolean allowNewPoint,
boolean allowNewCoordinateSystem,
boolean allowNewVector,
boolean allowNewPlane,
boolean isRequired,
boolean allowMultipleSelection)
Creates a
DieLocationsBuilder . |
DiePlaneBuilder |
DieCollection.createDiePlane(Feature feature)
Creates a
DiePlaneBuilder . |
QuickBinderWrapBuilder |
DieCollection.createQuickBinderWrapBuilder(Feature quickBinderWrap)
Creates a
QuickBinderWrapBuilder . |
TrimLineDevelopmentBuilder |
DieCollection.createTrimLineDevelopmentBuilder(Feature trimLineDevelopment)
Creates a
TrimLineDevelopmentBuilder . |
DrawDiePunchBuilder |
DieCollection.drawDiePunch(Feature drawDiePunch)
Creates the draw die punch feature builder.
|
FaceSheetBuilder |
DieCollection.faceSheet(Feature faceSheet)
Creates a
FaceSheetBuilder . |
FillBuilder |
DieCollection.fill(Feature fill)
Creates/Edits the die area fill feature builder.
|
FlangeTaskBuilder |
DieCollection.flangeTask(Feature flangeTask)
Creates/Edits the flange task feature builder.
|
FormTaskBuilder |
DieCollection.formTask(Feature formTask)
Creates/Edits the form task feature builder.
|
LineupBuilder |
DieCollection.lineup(Feature lineup)
Creates/Edits the die lineup feature builder.
|
OutputCurvesBuilder |
DieCollection.outputCurves(Feature outcurves)
Creates/Edits the die output curves feature builder.
|
PierceTaskBuilder |
DieCollection.pierceTask(Feature pierceTask)
Creates/Edits the pierce task feature builder.
|
RotorBuilder |
DieCollection.rotor(Feature rotor)
Creates the die_rotor feature builder.
|
void |
OutputCurvesBuilder.setReferenceFeature(Feature referenceFeature)
Sets the reference feature - must be either a die section or form task feature
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
FaceSheetBuilder.setStampingOutput(Feature object)
Sets the stamping output feature of the Face Sheet
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
TrimTaskBuilder.setTippedProduct(Feature tippedProduct)
Sets the tipped product of the trim task
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
PierceTaskBuilder.setTippedProduct(Feature tippedProduct)
Sets the tipped product of the pierce task
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
FormTaskBuilder.setTippedProduct(Feature tippedProduct)
Sets the tipped product of the form task.
|
void |
FlangeTaskBuilder.setTippedProduct(Feature tippedProduct)
Sets the tipped product of the flange task
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
FillBuilder.setTippedProduct(Feature tippedProduct)
Sets the tipped product of the area fill
License requirements: die_engineering ("DIE ENGINEERING") . |
SteelInsertBuilder |
DieCollection.steelinsert(Feature steelInsert)
Creates/Edits the steel insert feature builder.
|
TrimFlangeDieAssistantBuilder |
DieCollection.trimFlangeDieAssistant(Feature nullFeature)
Creates the trim/flange die assistant builder.
|
TrimTaskBuilder |
DieCollection.trimTask(Feature trimTask)
Creates/Edits the trim task feature builder.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AdaptiveShell
Represents a adaptive shell feature
To create or edit an instance of this class, use AdaptiveShellBuilder Created in NX6.0.0 |
interface |
AddendumSection
Represents an Addendum Section feature
To create or edit an instance of this class, use AddendumSectionBuilder Created in NX7.5.0 |
interface |
AddendumSurface
Represents an Addendum Surface feature
To create or edit an instance of this class, use AddSurfBuilder Created in NX6.0.0 |
interface |
AdmMoveFace
Represents a ADM Move Face feature
To create or edit an instance of this class, use AdmMoveFaceBuilder Created in NX6.0.0 |
interface |
AdmOffsetRegion
Represents a linear dimension feature
To create or edit an instance of this class, use AdmOffsetRegionBuilder Created in NX6.0.0 |
interface |
AdmResizeFace
Represents an ADM resize face feature
To create or edit an instance of this class, use AdmResizeFaceBuilder Created in NX6.0.0 |
interface |
AeroFlange
Represents a flange feature
To create or edit an instance of this class, use AeroFlangeBuilder Created in NX10.0.0 |
interface |
AeroRib
Represents a aero rib feature
To create or edit an instance of this class, use AeroRibBuilder Created in NX10.0.0 |
interface |
AestheticFaceBlend
Represents an aesthetic face blend feature
To create or edit an instance of this class, use AestheticFaceBlendBuilder Created in NX7.5.0 |
interface |
AnalyzePocket
Represents a analyze pocket feature.
|
interface |
AngularDim
Represents a angular dimension feature
To create or edit an instance of this class, use AngularDimBuilder Created in NX6.0.0 |
interface |
AOCS
Represents a Offset In Face feature (aka Associative Offset Curve on Surface )
To create or edit an instance of this class, use AOCSBuilder Created in NX4.0.0 |
interface |
AssemblyCut
Represents an assembly cut feature.
|
interface |
AssociativeArc
Represents a associative arc feature
To create or edit an instance of this class, use AssociativeArcBuilder Created in NX5.0.0 |
interface |
AssociativeLine
Represents a associative line feature
To create or edit an instance of this class, use AssociativeLineBuilder Created in NX5.0.0 |
interface |
Bead
Represents a Bead feature
To create or edit an instance of this class, use BeadBuilder Created in NX5.0.0 |
interface |
Bend
Represents a Bend feature
To create or edit an instance of this class, use BendBuilder Created in NX5.0.0 |
interface |
BendTaper
Represents a bend taper feature
To create or edit an instance of this class, use BendTaperBuilder Created in NX6.0.0 |
interface |
BlendCorner
Represents a blend corner feature
To create or edit an instance of this class, use BlendCornerBuilder Created in NX9.0.0 |
interface |
BlendPocket
Represents a blend pocket feature.
|
interface |
Block
Represents a block feature.
|
interface |
BodyByEquation
Represents a body by equation feature.
|
interface |
BodyFeature
Represents a feature on a part that has a body associated with it.
|
interface |
BooleanFeature
Represents a boolean feature.
|
interface |
BoundedPlane
Represents a bounded plane feature
To create or edit an instance of this class, use BoundedPlaneBuilder Created in NX6.0.0 |
interface |
BreakCorner
Represents a BreakCorner feature
To create or edit an instance of this class, use BreakCornerBuilder Created in NX5.0.0 |
interface |
Brep
Represents an unparameterized feature
An unparameterized feature is obtained from an existing feature. |
interface |
BridgeCurve
Represents a bridge curve feature
To create or edit an instance of this class, use BridgeCurveBuilderEx Created in NX5.0.0 |
interface |
BridgeSurface
Represents a bridge surface feature
To create or edit an instance of this class, use BridgeSurfaceBuilder Created in NX8.0.0 |
interface |
BridgeTransition
Represents a bridge transition feature
To create or edit an instance of this class, use BridgeTransitionBuilder Created in NX5.0.2 |
interface |
Chamfer
Represents a chamfer feature.
|
interface |
ChangeShellThickness
Represents a shell face feature
To create or edit an instance of this class, use ChangeShellThicknessBuilder Created in NX6.0.0 |
interface |
CircularBlendCurve
Represents a Circular Blend Curve feature
To create or edit an instance of this class, use CircularBlendCurveBuilder Created in NX5.0.0 |
interface |
ClosedCorner
Represents a ClosedCorner feature
To create or edit an instance of this class, use ClosedCornerBuilder Created in NX5.0.0 |
interface |
Coaxial
Represents a coaxial feature
To create or edit an instance of this class, use CoaxialBuilder Created in NX6.0.0 |
interface |
CombineBodyFeature
Represents a boolean feature.
|
interface |
CombinedProjection
Represents a combined projection feature
To create or edit an instance of this class, use CombinedProjectionBuilder Created in NX6.0.0 |
interface |
CombineSheets
Represents a combine sheets feature
To create or edit an instance of this class, use CombineSheetsBuilder Created in NX11.0.1 |
interface |
CompensateRoughData
Represents a compensate rough curve or compensate rough sheet feature
To create or edit an instance of this class, use CompensateRoughDataBuilder Created in NX6.0.0 |
interface |
CompositeCurve
Represents a composite curve feature
To create or edit an instance of this class, use CompositeCurveBuilder Created in NX5.0.0 |
interface |
ConcaveFaces
Represents a radius faces feature
To create or edit an instance of this class, use ConcaveFacesBuilder Created in NX7.5.0 |
interface |
Cone
Represents a cone feature
To create or edit an instance of this class, use ConeBuilder Created in NX6.0.0 |
interface |
ContourFlange
Represents a Contour Flange feature
To create or edit an instance of this class, use ContourFlangeBuilder Created in NX5.0.0 |
interface |
ConvertToSheetmetal
Represents a ConvertToSheetmetal feature
To create or edit an instance of this class, use ConvertToSheetmetalBuilder Created in NX5.0.0 |
interface |
Coplanar
Represents a Coplanar feature
To create or edit an instance of this class, use CoplanarBuilder Created in NX6.0.0 |
interface |
CopyFace
Represents a copy face feature
To create or edit an instance of this class, use CopyFaceBuilder Created in NX6.0.0 |
interface |
CurveFeature
Represents a curve feature
This is an abstract class, and cannot be instantiated. |
interface |
CurveLength
Represents a curve length feature.
|
interface |
CurveOnSurface
Represents a curve on surface feature
To create or edit an instance of this class, use CurveOnSurfaceBuilder Created in NX5.0.0 |
interface |
CustomFeature
Represents a custom feature
To create or edit an instance of this class, use CustomFeatureBuilder Created in NX10.0.0 |
interface |
CutFace
Represents a cut face feature
To create or edit an instance of this class, use CutFaceBuilder Created in NX6.0.0 |
interface |
Cylinder
Represents a cylinder feature
To create or edit an instance of this class, use CylinderBuilder Created in NX5.0.0 |
interface |
DatumAxisFeature
Represents a datum axis feature
To create or edit an instance of this class, use DatumAxisBuilder Created in NX3.0.0 |
interface |
DatumCsys
Represents a Datum Coordinate System feature.
|
interface |
DatumFeature
Represents a Datum feature that is positioned by a set of constraints.
|
interface |
DatumPlaneFeature
Represents a datum plane feature
To create or edit an instance of this class, use DatumPlaneBuilder Created in NX3.0.0 |
interface |
DeleteBody
Represents a delete body feature.
|
interface |
DeleteCurve
Represents a delete curve feature
To create or edit an instance of this class, use DeleteCurveBuilder Created in NX9.0.0 |
interface |
DeleteEdge
Represents a delete edge feature
To create or edit an instance of this class, use DeleteEdgeBuilder Created in NX8.0.0 |
interface |
DeleteFace
Represents a delete face feature , don't use it until nx502
To create or edit an instance of this class, use DeleteFaceBuilder Created in NX5.0.2 |
interface |
Dimple
Represents a Dimple feature
To create or edit an instance of this class, use DimpleBuilder Created in NX5.0.0 |
interface |
Divideface
Represents a Divideface feature.
|
interface |
Draft
Represents a Draft feature.
|
interface |
DraftBody
Represents a draft body feature
To create or edit an instance of this class, use DraftBodyBuilder Created in NX5.0.0 |
interface |
DrawDiePunch
Represents a draw die punch feature.
|
interface |
DrawnCutout
Represents a DrawnCutout feature
To create or edit an instance of this class, use DrawnCutoutBuilder Created in NX5.0.0 |
interface |
EdgeBlend
Represents an Edge Blend feature
To create or edit an instance of this class, use EdgeBlendBuilder Created in NX5.0.0 |
interface |
EdgeRip
Represents an EdgeRip feature
To create or edit an instance of this class, use EdgeRipBuilder Created in NX5.0.0 |
interface |
EdgeSymmetry
Represents an edge symmetry feature
To create or edit an instance of this class, use EdgeSymmetryBuilder Created in NX7.0.0 |
interface |
EditBend
Represents a edit bend feature
To create or edit an instance of this class, use EditBendBuilder Created in NX7.5.0 |
interface |
EditCrossSection
Represents a edit cross section feature.
|
interface |
Emboss
Represents an emboss feature
To create or edit an instance of this class, use EmbossBuilder Created in NX4.0.0 |
interface |
EmbossBody
Represents an emboss body feature
To create or edit an instance of this class, use EmbossBodyBuilder Created in NX8.5.0 |
interface |
Enlarge
Represents an enlarge feature
To create or edit an instance of this class, use EnlargeBuilder Created in NX6.0.0 |
interface |
ExtendSheet
Represents an extend sheet feature
To create or edit an instance of this class, use ExtendSheetBuilder Created in NX9.0.0 |
interface |
Extension
Represents a extension feature
To create or edit an instance of this class, use ExtensionBuilder Created in NX8.0.0 |
interface |
ExtractFace
Represents a Extract face feature
To create or edit an instance of this class, use ExtractFaceBuilder Created in NX5.0.0 |
interface |
Extrude
Represents an extrude feature.
|
interface |
FaceBlend
Represents a Face Blend feature.
|
interface |
FaceSheet
Represents a Face Sheet feature
To create or edit an instance of this class, use FaceSheetBuilder Created in NX5.0.0 |
interface |
FeatureGroup
Represents a
FeatureGroup Not support KF. |
interface |
FillHole
Represents a fill hole feature.
|
interface |
FitCurve
Represents a fit curve feature
To create or edit an instance of this class, use FitCurveBuilder Created in NX8.5.0 |
interface |
FitSurface
Represents a fit surface feature
To create or edit an instance of this class, use FitSurfaceBuilder Created in NX8.5.0 |
interface |
Fixed
Represents a Fixed feature
To create or edit an instance of this class, use FixedBuilder Created in NX7.0.0 |
interface |
Flange
Represents a Flange feature
To create or edit an instance of this class, use FlangeBuilder Created in NX5.0.0 |
interface |
FlatPattern
Represents a Flat Solid feature
To create or edit an instance of this class, use FlatPatternBuilder Created in NX5.0.1 |
interface |
FlatSolid
Represents a Flat Solid feature
To create or edit an instance of this class, use FlatSolidBuilder Created in NX5.0.0 |
interface |
FlatteningAndForming
Represents a flattening and forming feature
To create or edit an instance of this class, use FlatteningAndFormingBuilderEx Created in NX11.0.0 |
interface |
FlexibleCable
Represents a flexible cable
To create or edit an instance of this class, use FlexibleCableBuilder Created in NX7.5.0 |
interface |
FlowBlend
Represents a flow blend feature
To create or edit an instance of this class, use FlowBlendBuilder Created in NX10.0.0 |
interface |
FreeTransformer
Represents a free transformer feature
To create or edit an instance of this class, use FreeTransformerBuilder Created in NX10.0.0 |
interface |
GeneralConic
Represents a general conic feature
To create or edit an instance of this class, use GeneralConicBuilder Created in NX8.5.0 |
interface |
GeodesicChamfer
Represents a GeodesicChamfer feature.
|
interface |
GeodesicFillet
Represents a GeodesicFillet feature.
|
interface |
GeodesicIntersect
Represents a GeodesicIntersect feature.
|
interface |
GeodesicLine
Represents a GeodesicLine feature.
|
interface |
GeodesicOffset
Represents a GeodesicOffset feature.
|
interface |
GeodesicPoint
Represents a GeodesicPoint feature.
|
interface |
GeodesicProject
Represents a GeodesicProject feature.
|
interface |
GeodesicSketch
Represents a GeodesicSketch feature.
|
interface |
GeodesicTrim
Represents a GeodesicTrim feature.
|
interface |
Geomcopy
Represents a geomcopy feature
To create or edit an instance of this class, use GeomcopyBuilder Created in NX5.0.0 |
interface |
GlobalShaping
Represents a global shaping feature
To create or edit an instance of this class, use GlobalShapingBuilder Created in NX5.0.0 |
interface |
GroupFace
Represents a group face feature
To create or edit an instance of this class, use GroupFaceBuilder Created in NX6.0.0 |
interface |
GuidedExtensionEx
Represents a guided extension feature
To create or edit an instance of this class, use GuidedExtensionBuilderEx Created in NX10.0.0 |
interface |
Gusset
Represents a gusset feature
To create or edit an instance of this class, use GussetBuilder Created in NX7.5.0 |
interface |
Helix
Represents a helix feature
To create or edit an instance of this class, use HelixBuilder Created in NX8.5.0 |
interface |
HemFlange
Represents a hem flange feature
To create or edit an instance of this class, use HemFlangeBuilder Created in NX5.0.0 |
interface |
Hole
Represents a Hole feature
To create or edit an instance of this class, use HoleFeatureBuilder Created in NX3.0.0 |
interface |
HolePackage
Represents a hole package and hole series feature.
|
interface |
Human
Represents a human feature.
|
interface |
IForm
Represents a IForm feature
To create or edit an instance of this class, use IFormBuilder Created in NX7.5.0 |
interface |
InstanceFeature
Represents a instance feature
To create or edit an instance of this class, use InstanceFeatureBuilder Created in NX8.0.0 |
interface |
IntersectionCurve
Represents a
IntersectionCurve . |
interface |
IsoclineCurve
Represents a isocline curve feature
To create or edit an instance of this class, use IsoclineCurveBuilder Created in NX11.0.0 |
interface |
IsolateFeature
Represents a Isolate Object of feature
To create or edit an instance of this class, use IsolateFeatureBuilder Created in NX8.5.0 |
interface |
IsoparametricCurves
Represents a isoparametric curves feature
To create or edit an instance of this class, use IsoparametricCurvesBuilder Created in NX8.0.0 |
interface |
Jog
Represents a Jog feature
To create or edit an instance of this class, use JogBuilder Created in NX5.0.0 |
interface |
JoinCurves
Represents a join curve feature
To create or edit an instance of this class, use JoinCurvesBuilder Created in NX5.0.0 |
interface |
LabelChamfer
Represents a label chamfer feature
To create or edit an instance of this class, use LabelChamferBuilder Created in NX7.0.0 |
interface |
LabelNotchBlend
Represents a label notch blend feature
To create or edit an instance of this class, use LabelNotchBlendBuilder Created in NX8.0.0 |
interface |
Lattice
Represents a lattice utility
To create or edit an instance of this class, use LatticeBuilder Created in NX11.0.2 |
interface |
LawCurve
Represents a law curve feature
To create or edit an instance of this class, use LawCurveBuilder Created in NX7.5.1 |
interface |
LawExtension
Represents a law extension feature
To create or edit an instance of this class, use LawExtensionBuilder Created in NX6.0.0 |
interface |
LawExtensionEx
Represents a law extension feature
To create or edit an instance of this class, use LawExtensionBuilderEx Created in NX8.5.0 |
interface |
LinearDimension
Represents a linear dimension feature
To create or edit an instance of this class, use LinearDimensionBuilder Created in NX6.0.0 |
interface |
LinkedFacet
Represents a linked facet feature
To create or edit an instance of this class, use LinkedFacetBuilder Created in NX6.0.0 |
interface |
LocalScaleCurve
Represents a local scale curve feature
To create or edit an instance of this class, use LocalScaleCurveBuilder Created in NX11.0.0 |
interface |
LoftedFlange
Represents a Lofted Flange feature
To create or edit an instance of this class, use LoftedFlangeBuilder Created in NX5.0.0 |
interface |
Louver
Represents a Louver feature
To create or edit an instance of this class, use LouverBuilder Created in NX5.0.0 |
interface |
MakeOffset
Represents a make offset feature
To create or edit an instance of this class, use MakeOffsetBuilder Created in NX7.5.0 |
interface |
MakeSolid
Represents a make solid feature that converts closed sheet bodies to solid bodies.
|
interface |
Maple
Deprecated.
Deprecated in NX12.0.0. Use
MathIntegration instead.
|
interface |
MasterCut
Represents a section view feature
To create or edit an instance of this class, use MasterCutBuilder Created in NX5.0.0 |
interface |
MatchEdge
Represents a match edge feature
To create or edit an instance of this class, use MatchEdgeBuilder Created in NX6.0.0 |
interface |
MathIntegration
Represents a math integration feature
To create or edit an instance of this class, use MathIntegrationBuilder Created in NX12.0.0 |
interface |
MeshSurface
Represents a mesh surface feature.
|
interface |
MeshTransformer
Represents a mesh transformer feature
To create or edit an instance of this class, use MeshTransformerBuilder Created in NX10.0.0 |
interface |
Metaform
Represents a metaform feature
To create or edit an instance of this class, use MetaformBuilder Created in NX7.5.0 |
interface |
MidSurfaceByFacePairs
Represents a mid surface by face pairs feature
To create or edit an instance of this class, use MidSurfaceByFacePairsBuilder Created in NX7.5.0 |
interface |
MidSurfaceFacePair
Represents a mid surface by face pairs feature
This is an abstract class . |
interface |
MidSurfaceUserDefined
Represents a midsurface user defined feature
To create or edit an instance of this class, use MidSurfaceUserDefinedBuilder Created in NX7.5.0 |
interface |
Mirror
Represents a mirror feature.
|
interface |
MirrorBody
Represents a mirror body feature.
|
interface |
MirrorCurve
Represents a mirror curve feature
To create or edit an instance of this class, use MirrorCurveBuilder Created in NX6.0.0 |
interface |
MirrorFace
Represents a Mirror Face feature
To create or edit an instance of this class, use MirrorFaceBuilder Created in NX6.0.0 |
interface |
MirrorFeature
Represents a mirror feature feature.
|
interface |
MoveCurve
Represents a move curve feature
To create or edit an instance of this class, use MoveCurveBuilder Created in NX9.0.0 |
interface |
MoveEdge
Represents a move edge feature
To create or edit an instance of this class, use MoveEdgeBuilder Created in NX9.0.0 |
interface |
MoveFace
Represents a move face feature , don't use it until nx502
To create or edit an instance of this class, use MoveFaceBuilder Created in NX5.0.2 |
interface |
MoveObject
Represents a Move-Object feature.
|
interface |
NormalCutout
Represents a Normal Cutout feature
To create or edit an instance of this class, use NormalCutoutBuilder Created in NX5.0.0 |
interface |
NSidedSurface
Represents a nsided surface feature
To create or edit an instance of this class, use NSidedSurfaceBuilder Created in NX6.0.0 |
interface |
Offset3DCurve
Represents a offset 3D curve feature
To create or edit an instance of this class, use Offset3DCurveBuilder Created in NX10.0.0 |
interface |
OffsetCurve
Represents a offset curve feature
To create or edit an instance of this class, use OffsetCurveBuilder Created in NX5.0.0 |
interface |
OffsetEdge
Represents a offset edge feature
To create or edit an instance of this class, use OffsetEdgeBuilder Created in NX9.0.0 |
interface |
OffsetEmboss
Represents an offset emboss feature
To create or edit an instance of this class, use OffsetEmbossBuilder Created in NX5.0.0 |
interface |
OffsetFace
Represents a offset face feature
To create or edit an instance of this class, use OffsetFaceBuilder Created in NX5.0.0 |
interface |
OffsetFacetBody
Represents a offset facet body feature
To create or edit an instance of this class, use OffsetFacetBodyBuilder Created in NX12.0.0 |
interface |
OffsetMoveCurve
Represents a offset move curve feature
To create or edit an instance of this class, use OffsetMoveCurveBuilder Created in NX9.0.0 |
interface |
OffsetRegion
Represents an offset region feature , don't use it until nx502
To create or edit an instance of this class, use OffsetRegionBuilder Created in NX5.0.2 |
interface |
OffsetSurface
Represents a offset surface feature.
|
interface |
Parallel
Represents a parallel feature
To create or edit an instance of this class, use ParallelBuilder Created in NX6.0.0 |
interface |
PartModule
Represents a part module
To create or edit an instance of this class, use PartModuleBuilder Created in NX8.0.0 |
interface |
PasteFace
Represents a paste face feature
To create or edit an instance of this class, use PasteFaceBuilder Created in NX6.0.0 |
interface |
Patch
Represents a Patch feature
To create or edit an instance of this class, use PatchBuilder Created in NX6.0.1 |
interface |
PatchOpenings
Represents a Patch Openings feature
To create or edit an instance of this class, use PatchOpeningsBuilder Created in NX5.0.0 |
interface |
PatternFace
Represents a pattern face feature , don't use it until nx502
To create or edit an instance of this class, use PatternFaceBuilder Created in NX5.0.2 |
interface |
PatternFaceFeature
Represents a pattern face feature
To create or edit an instance of this class, use PatternFaceFeatureBuilder Created in NX9.0.0 |
interface |
PatternFeature
Represents a pattern feature
To create or edit an instance of this class, use PatternFeatureBuilder Created in NX7.0.0 |
interface |
PatternGeometry
Represents a pattern geometry feature.
|
interface |
Perpendicular
Represents a perpendicular feature
To create or edit an instance of this class, use PerpendicularBuilder Created in NX6.0.0 |
interface |
PierceTask
Represents a Pierce Task feature
To create or edit an instance of this class, use PierceTaskBuilder Created in NX5.0.0 |
interface |
PointFeature
Represents a point feature
To create or edit an instance of this class, use PointFeatureBuilder Created in NX5.0.0 |
interface |
PointSet
Represents a point set feature
To create or edit an instance of this class, use PointSetBuilder Created in NX6.0.0 |
interface |
PoleSmoothing
Represents a pole smoothing feature
To create or edit an instance of this class, use PoleSmoothingBuilder Created in NX6.0.0 |
interface |
Prebend
Represents a Prebend feature
To create or edit an instance of this class, use PrebendBuilder Created in NX10.0.0 |
interface |
ProjectCurve
Represents a project curve feature.
|
interface |
Promotion
Represents a promotion feature.
|
interface |
PullFace
Represents a pull face feature
To create or edit an instance of this class, use PullFaceBuilder Created in NX6.0.0 |
interface |
QuickBinder
Represents a quick binder feature
To create or edit an instance of this class, use QuickBinderBuilder Created in NX7.5.0 |
interface |
RadialDimension
Represents a radial dimension feature
To create or edit an instance of this class, use RadialDimensionBuilder Created in NX6.0.0 |
interface |
RapidSurface
Represents a Rapid Surfacing feature
To create or edit an instance of this class, use RapidSurfaceBuilder Created in NX5.0.0 |
interface |
RasterImage
Represents a Raster Image feature
Not supported by KF at this time . |
interface |
Rebend
Represents a Rebend feature
To create or edit an instance of this class, use RebendBuilder Created in NX5.0.0 |
interface |
RefitFace
Represents a refit face feature
To create or edit an instance of this class, use RefitFaceBuilder Created in NX6.0.0 |
interface |
ReorderBlends
Represents a reorder blends feature
To create or edit an instance of this class, use ReorderBlendsBuilder Created in NX7.5.1 |
interface |
ReplaceBlend
Represents a replace blend feature
To create or edit an instance of this class, use ReplaceBlendBuilder Created in NX7.0.0 |
interface |
ReplaceFace
Represents a replace face feature , don't use it until nx502
To create or edit an instance of this class, use ReplaceFaceBuilder Created in NX5.0.2 |
interface |
ResizeBendAngle
Represents a resize bend angle feature
To create or edit an instance of this class, use ResizeBendAngleBuilder Created in NX5.0.0 |
interface |
ResizeBendRadius
Represents a resize bend radius feature
To create or edit an instance of this class, use ResizeBendRadiusBuilder Created in NX5.0.0 |
interface |
ResizeBlend
Represents a resize blend feature , don't use it until nx502
To create or edit an instance of this class, use ResizeBlendBuilder Created in NX5.0.2 |
interface |
ResizeChamfer
Represents a resize chamfer feature
To create or edit an instance of this class, use ResizeChamferBuilder Created in NX7.0.0 |
interface |
ResizeChamferCurve
Represents a resize chamfer curve feature
To create or edit an instance of this class, use ResizeChamferCurveBuilder Created in NX10.0.0 |
interface |
ResizeCurve
Represents a resize curve feature
To create or edit an instance of this class, use ResizeCurveBuilder Created in NX9.0.0 |
interface |
ResizeFace
Represents a resize blend feature , don't use it until nx502
To create or edit an instance of this class, use ResizeFaceBuilder Created in NX5.0.2 |
interface |
ResizeNeutralFactor
Represents a resize neutral factor feature
To create or edit an instance of this class, use ResizeNeutralFactorBuilder Created in NX5.0.0 |
interface |
ResizePlane
Represents a Resize Datum Plane feature
To create or edit an instance of this class, use ResizePlaneBuilder Created in NX6.0.3 |
interface |
Revolve
Represents a revolve feature.
|
interface |
Rib
Represents a rib feature
To create or edit an instance of this class, use RibBuilder Created in NX9.0.0 |
interface |
Ribbon
Represents a ribbon feature
To create or edit an instance of this class, use RibbonBuilder Created in NX6.0.0 |
interface |
Rotor
Represents a Die CAM Rotor feature.
|
interface |
RPO
Represents an RPO dimension
This is an abstract class, and cannot be instantiated . |
interface |
Ruled
Represents a ruled feature.
|
interface |
Scale
Represents a scale feature.
|
interface |
ScaleCurve
Represents a scale curve feature
To create or edit an instance of this class, use ScaleCurveBuilder Created in NX11.0.0 |
interface |
SectionCurve
Represents a section curves feature.
|
interface |
SectionInertiaAnalysis
Represents a section inertia analysis feature
To create or edit an instance of this class, use SectionInertiaAnalysisBuilder Created in NX5.0.0 |
interface |
SectionSurface
Represents a section surface feature
To create or edit an instance of this class, use SectionSurfaceBuilder Created in NX6.0.0 |
interface |
ServiceOrientedBodyFeature
Represents a body feature
To create or edit an instance of this class, use ServiceOrientedBodyFeatureBuilder Created in NX11.0.0 |
interface |
ServiceOrientedFeatureCurve
Represents a curve feature
To create or edit an instance of this class, use ServiceOrientedFeatureCurveBuilder Created in NX11.0.0 |
interface |
Sew
Represents a sew feature.
|
interface |
SheetMetalFromSolid
Represents a Sheet Metal from Solid feature
To create or edit an instance of this class, use SheetMetalFromSolidBuilder Created in NX6.0.0 |
interface |
Shelf
Represents a shelf feature
To create or edit an instance of this class, use ShelfBuilder Created in NX10.0.0 |
interface |
Shell
Represents a Shell feature.
|
interface |
ShellFace
Represents a shell face feature
To create or edit an instance of this class, use ShellFaceBuilder Created in NX6.0.0 |
interface |
SilhouetteFlange
Represents a silhouette flange feature
To create or edit an instance of this class, use SilhouetteFlangeBuilder Created in NX6.0.0 |
interface |
SketchFeature
Represents a sketch feature
This is an abstract class, and cannot be instantiated . |
interface |
SmoothCurveString
Represents a smooth section feature
To create or edit an instance of this class, use SmoothCurveStringBuilder Created in NX9.0.0 |
interface |
SmoothSpline
Represents a smooth spline feature
To create or edit an instance of this class, use SmoothSplineBuilder Created in NX6.0.0 |
interface |
SnipSurface
Represents a snip surface feature
To create or edit an instance of this class, use SnipSurfaceBuilder Created in NX6.0.0 |
interface |
SoftBlend
Represents a Soft Blend feature.
|
interface |
SolidPunch
Represents a Solid Punch feature
To create or edit an instance of this class, use SolidPunchBuilder Created in NX6.0.2 |
interface |
Sphere
Represents a sphere feature
To create or edit an instance of this class, use SphereBuilder Created in NX6.0.0 |
interface |
SphericalCorner
Represents a spherical corner feature
To create or edit an instance of this class, use SphericalCornerBuilder Created in NX8.5.0 |
interface |
SpineCurve
Represents a spine curve feature
To create or edit an instance of this class, use SpineCurveBuilder Created in NX11.0.0 |
interface |
SplitBody
Represents a split body feature.
|
interface |
Step
Represents a step feature
To create or edit an instance of this class, use StepBuilder Created in NX10.0.0 |
interface |
StudioSpline
Represents a studio spline feature
To create or edit an instance of this class, use StudioSplineBuilderEx Created in NX5.0.0 |
interface |
StudioSurface
Represents a studio surface feature
To create or edit an instance of this class, use StudioSurfaceBuilder Created in NX5.0.0 |
interface |
StudioSurfaceEx
Represents a new studio surface feature
To create or edit an instance of this class, use StudioSurfaceBuilderEx Created in NX8.5.0 |
interface |
StudioXform
Represents a studio xform feature
To create or edit an instance of this class, use StudioXformBuilderEx Created in NX6.0.0 |
interface |
StyledBlend
Represents a styled blend feature
To create or edit an instance of this class, use StyledBlendBuilder Created in NX6.0.0 |
interface |
StyledCorner
Represents a styled corner feature
To create or edit an instance of this class, use StyledCornerBuilder Created in NX6.0.0 |
interface |
StyledSweep
Represents a styled sweep feature
To create or edit an instance of this class, use StyledSweepBuilder Created in NX6.0.0 |
interface |
SweepAlongGuide
Represents a sweep along guide feature
To create or edit an instance of this class, use SweepAlongGuideBuilder Created in NX6.0.0 |
interface |
Swept
Represents a swept feature
To create or edit an instance of this class, use SweptBuilder Created in NX5.0.0 |
interface |
SweptVolume
Represents a swept volume feature
To create or edit an instance of this class, use SweptVolumeBuilder Created in NX9.0.0 |
interface |
Symmetric
Represents a symmetric feature.
|
interface |
Tab
Represents a Tab feature
To create or edit an instance of this class, use TabBuilder Created in NX5.0.0 |
interface |
Tangent
Represents a tangent feature
To create or edit an instance of this class, use TangentBuilder Created in NX6.0.0 |
interface |
Text
Represents a text feature
To create or edit an instance of this class, use TextBuilder Created in NX7.5.1 |
interface |
Thicken
Represents a thicken feature.
|
interface |
ThreeBendCorner
Represents a ThreeBendCorner feature
To create or edit an instance of this class, use ThreeBendCornerBuilder Created in NX5.0.0 |
interface |
ThroughCurveMesh
Represents a through curve mesh feature.
|
interface |
ThroughCurves
Represents a Through Curves feature.
|
interface |
ToolingBox
Represents a tooling box feature
To create or edit an instance of this class, use ToolingBoxBuilder Created in NX10.0.0 |
interface |
TrimAndExtend
Represents a trim and extend feature
To create or edit an instance of this class, use TrimAndExtendBuilder Created in NX9.0.0 |
interface |
TrimBody
Represents a Trim Body feature.
|
interface |
TrimBody2
Represents a trim body feature.
|
interface |
TrimCurve
Represents a trim curve feature
To create or edit an instance of this class, use TrimCurveBuilder Created in NX5.0.0 |
interface |
TrimCurve2
Represents a new trim curve feature feature
To create or edit an instance of this class, use TrimCurve2Builder Created in NX11.0.1 |
interface |
TrimExtend
Represents a trim extend feature.
|
interface |
TrimLineDevelopment
Represents a trim line development feature
To create or edit an instance of this class, use TrimLineDevelopmentBuilder Created in NX6.0.0 |
interface |
TrimSheet
Represents a trim sheet feature.
|
interface |
Tube
Represents a tube feature
To create or edit an instance of this class, use TubeBuilder Created in NX5.0.0 |
interface |
Unbend
Represents a Unbend feature
To create or edit an instance of this class, use UnbendBuilder Created in NX5.0.0 |
interface |
UniversalUnform
Represents a UniversalUnform feature
To create or edit an instance of this class, use UniversalUnformBuilder Created in NX8.5.0 |
interface |
Unsew
Represents a Unsew feature
To create or edit an instance of this class, use UnsewBuilder Created in NX5.0.0 |
interface |
Untrim
Represents a Untrim feature.
|
interface |
UserDefinedObjectFeature
Represents a User Defined Object feature.
|
interface |
VariableOffset
Represents a variable offset feature
To create or edit an instance of this class, use VariableOffsetBuilder Created in NX8.0.0 |
interface |
VarOffsetFace
Represents a var offset face feature
To create or edit an instance of this class, use VarOffsetFaceBuilder Created in NX11.0.0 |
interface |
Varsweep
Represents a Varsweep feature.
|
interface |
VirtualCurve
Represents a virtual curve feature
To create or edit an instance of this class, use VirtualCurveBuilder Created in NX7.5.0 |
interface |
WaveDatum
Represents a WAVEDATUM feature
To create or edit an instance of this class, use WaveDatumBuilder Created in NX5.0.0 |
interface |
WaveLink
Represents a wavelink feature.
|
interface |
WavePoint
Represents a wavepoint feature
To create or edit an instance of this class, use WavePointBuilder Created in NX5.0.0 |
interface |
WaveRouting
Represents a waverouting feature
To create or edit an instance of this class, use WaveRoutingBuilder Created in NX5.0.0 |
interface |
WaveSketch
Represents a WAVESKETCH feature
To create or edit an instance of this class, use WaveSketchBuilder Created in NX5.0.1 |
interface |
WrapGeometry
Represents a wrap geometry feature
To create or edit an instance of this class, use WrapGeometryBuilder Created in NX6.0.0 |
interface |
WrapUnwrap
Represents a wrap or unwrap curve feature
To create or edit an instance of this class, use WrapBuilder Created in NX6.0.0 |
Modifier and Type | Field and Description |
---|---|
Feature |
SelectFeature.ValueData.selection
selected object
|
Feature |
SelectFeature.ValueWithCaeSetObjectInfoData.selection
selected object
|
Feature |
SelectFeature.ValueWithSnapData.selection1
first selected object
|
Feature |
SelectFeature.ValueWithSnapData.selection2
second selected object
|
Modifier and Type | Method and Description |
---|---|
Feature |
WaveSketchBuilder.commitCreateOnTheFly()
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
WaveRoutingBuilder.commitCreateOnTheFly()
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
WavePointBuilder.commitCreateOnTheFly()
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
Feature |
WaveDatumBuilder.commitCreateOnTheFly()
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
Feature |
ExtractFaceBuilder.commitCreateOnTheFly()
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
Feature |
CompositeCurveBuilder.commitCreateOnTheFly()
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
Feature |
FeatureBuilder.commitFeature()
Commits the feature parameters and creates the feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
Feature |
EmbeddedOperationBuilder.commitOperation()
Commits the operation and creates the feature.
|
Feature |
UserDefinedFeatureUpdateEvent.componentFeature()
Returns the component feature being updated
License requirements: None. |
Feature |
UserDefinedFeatureCreateEvent.copiedFeature()
Returns the feature in the destination part
License requirements: None. |
Feature |
UserDefinedFeatureCopyEvent.copiedFeature()
Returns the feature in the destination part
License requirements: None. |
Feature[] |
MidSurfaceByFacePairsBuilder.createFacePair()
Create or edit a face pair from selected side1 and side2 faces
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
PartModule.createLinkedPartModule(Part createdPart)
Creates a linked part module
License requirements: usr_defined_features ("USER DEFINED FEATURES") . |
Feature |
UserDefinedFeatureCreateEvent.definition()
Returns the user defined feature definition
License requirements: None. |
Feature |
UserDefinedFeatureEditEvent.feature()
Returns the related UDF
License requirements: None. |
Feature |
SketchConversionStatus.feature()
Returns the feature being converted to independent sketch.
|
Feature |
FeatureList.findItem(int index)
Returns the object at the input index.
|
Feature |
FeatureCollection.findObject(String journalIdentifier)
Finds the
nxopen.Features with the given identifier as recorded in a journal. |
Feature |
WavePointBuilder.frecAtTimeStamp()
Returns the frec at time stamp
License requirements: None. |
Feature |
MirrorBodyBuilder.frecAtTimeStamp()
Returns the frec at time stamp
License requirements: None. |
Feature |
ExtractFaceBuilder.frecAtTimeStamp()
Returns the option specifying if the results from this builder should be associated
License requirements: None. |
Feature |
CompositeCurveBuilder.frecAtTimeStamp()
Returns the frec at time stamp
License requirements: None. |
Feature[] |
Feature.getAllChildren()
Returns all immediate child features.
|
Feature[] |
IContainerFeature.getAllContainedFeatures()
Returns all the features contained in this container feature.
|
Feature[] |
FeatureCollection.getAllPartFeaturesWithAlerts()
Returns a list of all features from a given part that have update alerts
License requirements: None. |
Feature[] |
SelectFeatureList.getArray()
Returns the list of objects in the selection list.
|
Feature |
FeatureCollection.getAssociatedFeature(NXObject object)
Get the feature associated with an object
License requirements: None. |
Feature[] |
FeatureCollection.getAssociatedFeaturesOfBody(Body body)
Returns all features that are associated with this body
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
FeatureCollection.getAssociatedFeaturesOfEdge(Edge edge)
Returns all features that are associated with the faces of this edge
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
FeatureCollection.getAssociatedFeaturesOfFace(Face face)
Returns all features associated with this face
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
Feature.getChildren()
Returns the immediate child features.
|
Feature[] |
UserDefinedFeatureUpdateEvent.getComponentFeatures()
The component features that have been updated so far
License requirements: None. |
Feature[] |
UserDefinedFeatureCreateEvent.getComponentFeatures()
The component features that have been created so far
License requirements: None. |
Feature[] |
UserDefinedFeatureCopyEvent.getComponentFeatures()
The component features that have been copied so far
License requirements: None. |
Feature[] |
FeatureList.getContents()
Gets the contents of the entire list
License requirements: None. |
Feature |
OutputFeatureData.getFeature()
Get the feature
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
FeatureBuilder.getFeature()
Returns the feature currently being edited by this builder.
|
Feature |
CustomFeatureInternalFeaturePreUpdateEvent.getFeature()
Get the feature of the event
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
ConstructionFeatureData.getFeature()
Get the feature
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
FeatureCollection.getFeatures()
Returns all the features in the part.
|
Feature |
HolePackage.getHoleSeriesEndHoleFeature()
Returns the end hole feature in hole series feature
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
HolePackage.getHoleSeriesMiddleHoleFeatures()
Returns the middle hole features in hole series feature
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
HolePackage.getHoleSeriesStartHoleFeature()
Returns the start hole feature in hole series feature
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
IContainerFeature.getImmediateContainedFeatures()
Returns the Immediate Contained features within the container feature
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
FeatureGroup.getMembers()
Gets the members of feature group.
|
Feature |
EmbeddedOperationBuilder.getOperation()
Returns the feature currently being edited by this builder.
|
Feature |
FeatureCollection.getParentFeatureOfBody(Body body)
Returns the feature that created this body.
|
Feature |
FeatureCollection.getParentFeatureOfFace(Face face)
Returns the feature that created this face
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature[] |
FeatureCollection.getParentFeaturesOfEdge(Edge edge)
Returns the features that created the faces of this edge.
|
Feature[] |
Feature.getParents()
Returns the immediate parent features.
|
Feature[] |
FeatureCollection.getPartFeaturesWithNewAlerts()
Returns a list of features that generated update alerts during recent update
License requirements: None. |
Feature |
FeatureCollection.insertNewDesignGroup(Feature referenceDesignGroup)
Creates a new empty design group after a specified referece design group
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
UserDefinedFeatureUpdateEvent.instantiation()
Returns the UDF instantiation
License requirements: None. |
Feature |
UserDefinedFeatureIconEvent.instantiation()
Returns the UDF instantiation feature
License requirements: None. |
Feature |
UserDefinedFeatureCreateEvent.originalFeature()
Returns the original feature being copied
License requirements: None. |
Feature |
UserDefinedFeatureCopyEvent.originalFeature()
Returns the original feature being copied
License requirements: None. |
Feature |
UserDefinedFeatureCopyEvent.originalInstantiation()
Returns the UDF definition
License requirements: None. |
Feature |
VarsweepBuilder.sketchOnPathFeature()
Returns the sketch on path
License requirements: None. |
Feature |
ToolingCollection.toolingFindObject(String journalIdentifier)
Finds the
nxopen.Features with the given identifier as
recorded in a journal. |
Feature[] |
FeatureCollection.unsuppressFeatures(Feature[] features)
Unsuppress the given features
License requirements: solid_modeling ("SOLIDS MODELING") . |
Feature |
DatumPlaneBuilder.updateFeature()
Update the feature if the feature does not exist then create it
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
Feature |
SelectFeature.value()
Returns the object being selected
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectFeatureList.add(Feature object)
Adds an object to the list
License requirements: None. |
boolean |
SelectFeatureList.add(Feature[] objects)
Adds a set of objects to the list
License requirements: None. |
boolean |
SelectFeatureList.add(Feature selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
void |
FeatureGroup.addMembersWithRelocation(Feature[] members,
boolean reorderTimestamp,
boolean updateRelocatedFeatures)
Adds given features into feature group.
|
void |
FeatureList.append(Feature object)
Appends an object to the list
License requirements: None. |
void |
FeatureList.append(Feature[] objects)
Appends a set of objects to the list
License requirements: None. |
boolean |
SelectFeatureList.contains(Feature object)
Returns whether the specified object is already in the list or not.
|
FeatureBuilder |
AutomotiveCollection.createAllAroundVisionBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createAllAroundVisionBuilder(nxopen.features.vehicledesign.AllAroundVision) instead.
|
AOCSBuilder |
FeatureCollection.createAocsBuilder(Feature aocs)
Creates an Offset In Face builder
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING") . |
BlockFeatureBuilder |
FeatureCollection.createBlockFeatureBuilder(Feature block)
Creates a Block feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
BridgeCurveBuilder |
FeatureCollection.createBridgeCurveBuilder(Feature bridgeCurve)
Deprecated.
Deprecated in NX8.5.0. Use
FeatureCollection.createBridgeCurveBuilderEx(nxopen.features.BridgeCurve) instead.
|
BulkHeadsBuilder |
ShipCollection.createBulkHeadsBuilder(Feature bulkHead)
Creates a
BulkHeadsBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX5.0.0 |
FeatureBuilder |
AutomotiveCollection.createBumperPendulumBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createBumperPendulumBuilder(nxopen.features.vehicledesign.BumperPendulum) instead.
|
ChamferBuilder |
FeatureCollection.createChamferBuilder(Feature chamfer)
Creates a Chamfer feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
FeatureBuilder |
AutomotiveCollection.createCloseRangeVisibilityBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createCloseRangeVisibilityBuilder(nxopen.features.vehicledesign.CloseRangeVisibility) instead.
|
CompositeCurveBuilder |
FeatureCollection.createCompositeCurveBuilder(Feature compositeCurve)
Creates a
CompositeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") Created in NX5.0.0 |
ConstructionFeatureData |
CustomFeaturePreUpdateEvent.createConstructionFeatureData(Feature feature)
Returns construction feature data for given construction feature of a custom feature
License requirements: solid_modeling ("SOLIDS MODELING") . |
CoplanarBuilder |
FeatureCollection.createCoplanarBuilder(Feature coplanar)
Creates a coplanar builder, don't use it until nx6
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
CopyFaceBuilder |
FeatureCollection.createCopyFaceBuilder(Feature copyFace)
Creates a copy face builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
FeatureBuilder |
AutomotiveCollection.createCrashBarrierBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createCrashBarrierBuilder(nxopen.features.vehicledesign.CrashBarrier) instead.
|
CurveLengthBuilder |
FeatureCollection.createCurvelengthBuilder(Feature curvelength)
Creates a Curvelength builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
CustomBracketBuilder |
ShipCollection.createCustomBracketBuilder(Feature customBracket)
Creates a
CustomBracketBuilder
License requirements: nx_ship_concept ("Ship Concept") Created in NX7.5.0 |
CustomFeatureBuilder |
FeatureCollection.createCustomFeatureBuilder(Feature customFeature)
Creates a
CustomFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX11.0.0 |
CutFaceBuilder |
FeatureCollection.createCutFaceBuilder(Feature cutFace)
Creates a cut face builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
CylinderBuilder |
FeatureCollection.createCylinderBuilder(Feature cylinder)
Creates a
CylinderBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") Created in NX5.0.0 |
DatumAxisBuilder |
FeatureCollection.createDatumAxisBuilder(Feature datumAxis)
Creates a Datum Axis feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
DatumCsysBuilder |
FeatureCollection.createDatumCsysBuilder(Feature datumCsys)
Creates a Datum CSYS feature builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
DatumPlaneBuilder |
FeatureCollection.createDatumPlaneBuilder(Feature dplane)
Creates a Datum Plane feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
DecksBuilder |
ShipCollection.createDecksBuilder(Feature decks)
Creates a
DecksBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX5.0.0 |
DeleteFaceBuilder |
FeatureCollection.createDeleteFaceBuilder(Feature deleteFace)
Creates a delete face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
DivideCurveBuilder |
BaseFeatureCollection.createDivideCurveBuilder(Feature divideCurve)
Creates a
DivideCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
DividefaceBuilder |
FeatureCollection.createDividefaceBuilder(Feature divideface)
Creates a Divideface builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
DraftBodyBuilder |
FeatureCollection.createDraftBodyBuilder(Feature draftBody)
Creates a
DraftBodyBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
DraftBuilder |
FeatureCollection.createDraftBuilder(Feature draft)
Creates a draft builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
DvToMvMappingBuilder |
ShipCollection.createDvToMvMappingBuilder(Feature mappingFeature)
Creates a
DvToMvMappingBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX8.5.0 |
FeatureBuilder |
AutomotiveCollection.createDynamicCurbBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createDynamicCurbBuilder(nxopen.features.vehicledesign.DynamicCurb) instead.
|
EdgeBlendBuilder |
FeatureCollection.createEdgeBlendBuilder(Feature edgeblend)
Creates a Edge Blend feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
EdgeSymmetryBuilder |
FeatureCollection.createEdgeSymmetryBuilder(Feature edgeSymmetry)
Creates a
EdgeSymmetryBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX7.0.0 |
EmbossBuilder |
FeatureCollection.createEmbossBuilder(Feature emboss)
Creates an Emboss builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
ExtractFaceBuilder |
FeatureCollection.createExtractFaceBuilder(Feature copyFace)
Creates a
ExtractFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") Created in NX5.0.0 |
ExtrudeBuilder |
FeatureCollection.createExtrudeBuilder(Feature extrude)
Creates a Extrude builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
FaceBlendBuilder |
FeatureCollection.createFaceBlendBuilder(Feature faceBlend)
Creates a Face Blend feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
FrameBarOutBuilder |
ShipCollection.createFrameBarOutBuilder(Feature frameBarOut)
Creates a
FrameBarOutBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX5.0.0 |
FreeTransformerBuilder |
FeatureCollection.createFreeTransformerBuilder(Feature freeTransformer)
Creates a
FreeTransformerBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX10.0.0 |
GeomcopyBuilder |
FeatureCollection.createGeomcopyBuilder(Feature geomcopy)
Creates a
GeomcopyBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
FeatureBuilder |
AutomotiveCollection.createGroundClearanceBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createGroundClearanceBuilder(nxopen.features.vehicledesign.GroundClearance) instead.
|
GuidedExtensionBuilderEx |
FeatureCollection.createGuidedExtensionBuilderEx(Feature guidedExtension)
Creates a
GuidedExtensionBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX10.0.0 |
FeatureBuilder |
AutomotiveCollection.createHeadImpactApillarBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactApillarBuilder(nxopen.features.vehicledesign.HeadImpactAPillar) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactBpillarBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactBpillarBuilder(nxopen.features.vehicledesign.HeadImpactBPillar) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactBuilder(nxopen.features.vehicledesign.HeadImpact) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactFrontHeaderBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactFrontHeaderBuilder(nxopen.features.vehicledesign.HeadImpactFrontHeader) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactOpillarBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactOpillarBuilder(nxopen.features.vehicledesign.HeadImpactOPillar) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactOtherRailBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactOtherRailBuilder(nxopen.features.vehicledesign.HeadImpactOtherRail) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactRearHeaderBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactRearHeaderBuilder(nxopen.features.vehicledesign.HeadImpactRearHeader) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactRpillarBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactRpillarBuilder(nxopen.features.vehicledesign.HeadImpactRPillar) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactSideRailBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactSideRailBuilder(nxopen.features.vehicledesign.HeadImpactSideRail) instead.
|
FeatureBuilder |
AutomotiveCollection.createHeadImpactUpperRoofBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHeadImpactUpperRoofBuilder(nxopen.features.vehicledesign.HeadImpactUpperRoof) instead.
|
HoleFeatureBuilder |
FeatureCollection.createHoleFeatureBuilder(Feature hole)
Creates a Hole feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
FeatureBuilder |
FeatureCollection.createHoodVisibilityBuilder(Feature hoodVisibility)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHoodVisibilityBuilder(nxopen.features.vehicledesign.HoodVisibility) instead.
|
HumanBuilder |
FeatureCollection.createHumanBuilder(Feature human)
Creates a human feature builder.
|
FeatureBuilder |
AutomotiveCollection.createInnerAngleBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createInnerAngleBuilder(nxopen.features.vehicledesign.InnerAngle) instead.
|
InsertFramesBuilder |
ShipCollection.createInsertFramesBuilder(Feature insertFrames)
Create a InsertFramesBuilder.
|
IntersectionCurveBuilder |
FeatureCollection.createIntersectionCurveBuilder(Feature intersectionCurve)
Creates a
IntersectionCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
ItFramesBuilder |
ShipCollection.createItFramesBuilder(Feature itFrame)
Creates a
ItFramesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX5.0.0 |
JoinCurvesBuilder |
FeatureCollection.createJoinCurvesBuilder(Feature joinCurves)
Creates a
JoinCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") Created in NX5.0.0 |
LawExtensionBuilderEx |
FeatureCollection.createLawExtensionBuilderEx(Feature lawExtension)
Creates a
LawExtensionBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
MainDimensionsBuilder |
ShipCollection.createMainDimensionsBuilder(Feature mainDimensions)
Creates a
MainDimensionsBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX5.0.0 |
FeatureBuilder |
AutomotiveCollection.createManikinBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createManikinBuilder(nxopen.features.vehicledesign.Manikin) instead.
|
ManufacturingOutBuilder |
ShipCollection.createManufacturingOutBuilder(Feature frameBarOut)
Creates a
ManufacturingOutBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing") Created in NX5.3.0 |
MarkingLineBuilder |
ShipCollection.createMarkingLineBuilder(Feature markingLine)
Creates a
MarkingLineBuilder
License requirements: nx_ship_concept ("Ship Concept") Created in NX5.0.0 |
MarkingLineDesignBuilder |
ShipCollection.createMarkingLineDesignBuilder(Feature markingLine)
Creates a
MarkingLineDesignBuilder
License requirements: nx_ship_mfg_prep ("Ship Manufacturing") Created in NX8.0.0 |
MasterCutBuilder |
FeatureCollection.createMasterCutBuilder(Feature masterCut)
Create a Master Cut builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
MeshSurfaceBuilder |
FeatureCollection.createMeshSurfaceBuilder(Feature meshSurf)
Creates a Mesh Surface feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
MeshTransformerBuilder |
FeatureCollection.createMeshTransformerBuilder(Feature meshTransformer)
Creates a
MeshTransformerBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX10.0.0 |
MidSurfaceByFacePairsBuilder |
FeatureCollection.createMidSurfaceByFacePairsBuilder(Feature midSurfaceByFacePairs)
Creates a
MidSurfaceByFacePairsBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.5.0 |
MirrorBodyBuilder |
FeatureCollection.createMirrorBodyBuilder(Feature mirrorBody)
Creates a
MirrorBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") Created in NX5.0.0 |
FeatureBuilder |
AutomotiveCollection.createMirrorCertificationBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createMirrorCertificationBuilder(nxopen.features.vehicledesign.MirrorCertification) instead.
|
MirrorCurveBuilder |
FeatureCollection.createMirrorCurveBuilder(Feature mirrorCurve)
Creates a
MirrorCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX6.0.0 |
MirrorFaceBuilder |
FeatureCollection.createMirrorFaceBuilder(Feature mirrorFace)
Creates a mirror face builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
MirrorFeatureBuilder |
FeatureCollection.createMirrorFeatureBuilder(Feature mirrorFea)
Creates
MirrorFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
MoveFaceBuilder |
FeatureCollection.createMoveFaceBuilder(Feature moveFace)
Create a move face builder, don't use it until nx502
License requirements: solid_modeling ("SOLIDS MODELING") . |
OffsetCurveBuilder |
FeatureCollection.createOffsetCurveBuilder(Feature offsetCurve)
Creates a
OffsetCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") Created in NX5.0.0 |
OffsetEmbossBuilder |
FeatureCollection.createOffsetEmbossBuilder(Feature offsetEmboss)
Creates a Offsetemboss builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
OffsetFaceBuilder |
FeatureCollection.createOffsetFaceBuilder(Feature offsetface)
Creates a
OffsetFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
OffsetRegionBuilder |
FeatureCollection.createOffsetRegionBuilder(Feature offsetRegion)
Creates an offset region builder, don't use it until nx502
License requirements: solid_modeling ("SOLIDS MODELING") . |
OffsetSurfaceBuilder |
FeatureCollection.createOffsetSurfaceBuilder(Feature offsetSurface)
Creates an Offset Surface builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
FeatureBuilder |
AutomotiveCollection.createOilPanBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createOilPanBuilder(nxopen.features.vehicledesign.OilPan) instead.
|
OutputFeatureData |
CustomFeaturePostUpdateEvent.createOutputFeatureData(Feature feature)
Create output feature data
License requirements: solid_modeling ("SOLIDS MODELING") . |
OvercrownBuilder |
FeatureCollection.createOvercrownFeatureBuilder(Feature overcrown)
Creates a Overcrown feature builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
PasteFaceBuilder |
FeatureCollection.createPasteFaceBuilder(Feature pasteFace)
Creates a paste face builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
PatchBuilder |
FeatureCollection.createPatchBuilder(Feature patch)
|
PatchOpeningsBuilder |
FeatureCollection.createPatchOpeningsBuilder(Feature patchOpenings)
Creates a
PatchOpeningsBuilder
License requirements: None. |
PatternFaceBuilder |
FeatureCollection.createPatternFaceBuilder(Feature patternFace)
Creates a pattern face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
PatternFeatureBuilder |
FeatureCollection.createPatternFeatureBuilder(Feature patternFeature)
Creates
PatternFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX7.0.0 |
FeatureBuilder |
FeatureCollection.createPedestrianProtectionBuilder(Feature pedestrianProtection)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createPedestrianProtectionBuilder(nxopen.features.vehicledesign.PedestrianProtection) instead.
|
FeatureBuilder |
AutomotiveCollection.createPedestrianProtectionBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createPedestrianProtectionBuilder(nxopen.features.vehicledesign.PedestrianProtection) instead.
|
PlatePreparationBuilder |
ShipCollection.createPlatePreparationBuilder(Feature platePreparation)
Creates a
PlatePreparationBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing") Created in NX8.0.0 |
PointFeatureBuilder |
BaseFeatureCollection.createPointFeatureBuilder(Feature point)
Creates a
PointFeatureBuilder
License requirements: None. |
ProfileBuilder |
ShipCollection.createProfileBuilder(Feature profile)
|
ProfileCutoutBuilder |
ShipCollection.createProfileCutoutBuilder(Feature profileCutout)
Creates a
ProfileCutoutBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX8.0.0 |
ProfileListBuilder |
ShipCollection.createProfileListBuilder(Feature profileList)
Creates a
ProfileListBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing") Created in NX5.0.0 |
ProjectCurveBuilder |
FeatureCollection.createProjectCurveBuilder(Feature projectCurve)
Creates a
ProjectCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") Created in NX5.0.0 |
ReferenceLineBuilder |
ShipCollection.createReferenceLineBuilder(Feature referenceLine)
Creates a
ReferenceLineBuilder
License requirements: nx_ship_concept ("Ship Concept") Created in NX5.0.0 |
FeatureBuilder |
FeatureCollection.createReflectionDataBuilder(Feature reflectionData)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createReflectionDataBuilder(nxopen.features.vehicledesign.ReflectionData) instead.
|
ReplaceFaceBuilder |
FeatureCollection.createReplaceFaceBuilder(Feature replaceFace)
Creates a replace face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
ResizeBlendBuilder |
FeatureCollection.createResizeBlendBuilder(Feature resizeBlend)
Creates a resize blend builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
ResizeFaceBuilder |
FeatureCollection.createResizeFaceBuilder(Feature resizeFace)
Creates a resize face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
ResizePlaneBuilder |
FeatureCollection.createResizePlaneBuilder(Feature resizePlane)
Creates a Resize Datum Plane feature builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
RevolveBuilder |
FeatureCollection.createRevolveBuilder(Feature revolve)
Creates a Revolve builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
RibbonBuilder |
FeatureCollection.createRibbonBuilder(Feature ribbon)
Creates a ribbon builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
RPOBuilder |
FeatureCollection.createRpoBuilder(Feature rpo)
Creates a Relative Positioning Object builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
RuledBuilder |
FeatureCollection.createRuledBuilder(Feature ruled)
Creates a Ruled Surface builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
ScaleBuilder |
FeatureCollection.createScaleBuilder(Feature scale)
Creates a
ScaleBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
FeatureBuilder |
FeatureCollection.createSeatBeltAnchorageBuilder(Feature seatBeltAnchorage)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createSeatBeltAnchorageBuilder(nxopen.features.vehicledesign.SeatBeltAnchorage) instead.
|
SectionCurveBuilder |
FeatureCollection.createSectionCurveBuilder(Feature sectionCurves)
Creates a
SectionCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
SewBuilder |
FeatureCollection.createSewBuilder(Feature sew)
Creates a Sew feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
ShellBuilder |
FeatureCollection.createShellBuilder(Feature shell)
Creates an Shell builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") . |
FeatureBuilder |
ShipCollection.createShipFlatPatternBuilder(Feature shipFlatPattern)
Deprecated.
Deprecated in NX8.0.0. Use
PlatePreparationBuilder .CreatePlatePreparationBuilder() instead.
|
ShipProfileCutoutBuilder |
ShipCollection.createShipProfileCutoutBuilder(Feature profileCutout)
Creates a
ShipProfileCutoutBuilder
License requirements: nx_ship_concept ("Ship Concept") Created in NX5.3.0 |
FeatureBuilder |
AutomotiveCollection.createSlopeBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createSlopeBuilder(nxopen.features.vehicledesign.Slope) instead.
|
FeatureBuilder |
AutomotiveCollection.createStaticCurbBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createStaticCurbBuilder(nxopen.features.vehicledesign.StaticCurb) instead.
|
SteelDistributionBuilder |
ShipCollection.createSteelDistributionBuilder(Feature steelDistribution)
Creates a
SteelDistributionBuilder
License requirements: nx_ship_concept ("Ship Concept") Created in NX5.0.0 |
StudioSurfaceBuilder |
FeatureCollection.createStudioSurfaceBuilder(Feature studioSurface)
Creates a Studio Surface Builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
StudioSurfaceBuilderEx |
FreeformSurfaceCollection.createStudioSurfaceBuilderEx(Feature studioSurface)
Creates a
StudioSurfaceBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
StyledSweepBuilder |
FeatureCollection.createStyledSweepBuilder(Feature styledSweep)
Creates a
StyledSweepBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") Created in NX6.0.0 |
ThickenBuilder |
FeatureCollection.createThickenBuilder(Feature thicken)
Creates a Thicken feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
ThroughCurveMeshBuilder |
FeatureCollection.createThroughCurveMeshBuilder(Feature throughCurveMesh)
Creates a
ThroughCurveMeshBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
ThroughCurvesBuilder |
FeatureCollection.createThroughCurvesBuilder(Feature throughCurves)
Creates a
ThroughCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
FeatureBuilder |
AutomotiveCollection.createTireEnvelopeBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createTireEnvelopeBuilder(nxopen.features.vehicledesign.TireEnvelope) instead.
|
TransFrameBuilder |
ShipCollection.createTransFrameBuilder(Feature transFrame)
Create a TransFrameBuilder.
|
TrimBodyBuilder |
FeatureCollection.createTrimBodyBuilder(Feature trimbodyFeat)
Creates a trim body builder object.
|
TrimCornerBuilder |
BaseFeatureCollection.createTrimCornerBuilder(Feature trimCorner)
Creates a
TrimCornerBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
TrimExtendBuilder |
FeatureCollection.createTrimExtendBuilder(Feature trimExtend)
Creates a
TrimExtendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") Created in NX5.0.0 |
TrimSheetBuilder |
FeatureCollection.createTrimsheetBuilder(Feature trimSheet)
Creates a
TrimSheetBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
TubeBuilder |
FeatureCollection.createTubeBuilder(Feature tube)
Creates a
TubeBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
UntrimBuilder |
FeatureCollection.createUntrimBuilder(Feature untrim)
|
UpdateShipLibraryBuilder |
ShipCollection.createUpdateShipLibraryBuilder(Feature updateShipLibrary)
Creates a
UpdateShipLibraryBuilder
License requirements: nx_ship_concept ("Ship Concept") Created in NX5.3.0 |
UserDefinedObjectFeatureBuilder |
FeatureCollection.createUserDefinedObjectFeatureBuilder(Feature udoFeature)
Creates a UserDefinedObjectFeature builder
License requirements: None. |
VarsweepBuilder |
FeatureCollection.createVarsweepBuilder(Feature varsweep)
Creates a Varsweep feature builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
FeatureBuilder |
FeatureCollection.createVehicleCoordinateSystemBuilder(Feature vehicleCoordinateSystem)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createHoodVisibilityBuilder(nxopen.features.vehicledesign.HoodVisibility) instead.
|
FeatureBuilder |
FeatureCollection.createVisionPlaneBuilder(Feature visionPlane)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createVisionPlaneBuilder(nxopen.features.vehicledesign.VisionPlane) instead.
|
FeatureBuilder |
AutomotiveCollection.createVisionPlaneBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createVisionPlaneBuilder(nxopen.features.vehicledesign.VisionPlane) instead.
|
WaveDatumBuilder |
FeatureCollection.createWaveDatumBuilder(Feature wavedatum)
Creates a Wavedatum Builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
WaveInterfaceLinkerBuilder |
BaseFeatureCollection.createWaveInterfaceLinkerBuilder(Feature waveInterfaceLinker)
Creates a
WaveInterfaceLinkerBuilder DES12012
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX8.5.0 |
WaveLinkBuilder |
BaseFeatureCollection.createWaveLinkBuilder(Feature wavelink)
Creates a
WaveLinkBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
WavePointBuilder |
FeatureCollection.createWavePointBuilder(Feature wavepoint)
Creates a
WavePointBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") Created in NX5.0.0 |
WaveRoutingBuilder |
FeatureCollection.createWaveRoutingBuilder(Feature waverouting)
Creates a
WaveRoutingBuilder
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX5.0.0 |
WaveSketchBuilder |
FeatureCollection.createWaveSketchBuilder(Feature wavesketch)
Creates a Wavesketch Builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
WeldCutBuilder |
ShipCollection.createWeldCutBuilder(Feature weldCut)
|
FeatureBuilder |
AutomotiveCollection.createWheelCoveringBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createWheelCoveringBuilder(nxopen.features.vehicledesign.WheelCovering) instead.
|
FeatureBuilder |
AutomotiveCollection.createWheelFixingBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createWheelFixingBuilder(nxopen.features.vehicledesign.WheelFixing) instead.
|
FeatureBuilder |
FeatureCollection.createWindshieldDatumBuilder(Feature windshieldDatum)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createWindshieldDatumBuilder(nxopen.features.vehicledesign.WindshieldDatum) instead.
|
FeatureBuilder |
AutomotiveCollection.createWindshieldDatumBuilder(Feature feature)
Deprecated.
Deprecated in NX9.0.0. Use
VehicleDesignCollection.createWindshieldDatumBuilder(nxopen.features.vehicledesign.WindshieldDatum) instead.
|
YFrameBuilder |
ShipCollection.createYFrameBuilder(Feature transFrame)
Creates a
YFrameBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX5.0.0 |
ZFrameBuilder |
ShipCollection.createZFrameBuilder(Feature transFrame)
Creates a
ZFrameBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") Created in NX5.0.0 |
void |
ShowRelatedFacesBuilder.deleteConstraint(Feature feature)
Deletes the persistent constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
void |
FaceRecognitionBuilder.deleteConstraint(Feature feature)
Deletes the persistent constraint
License requirements: gateway ("UG GATEWAY") . |
void |
FeatureList.erase(Feature obj)
Erases the object from the list, but does not delete the object.
|
void |
FeatureList.erase(Feature obj,
ObjectList.DeleteOption deleteOption)
Erases the object from the list.
|
int |
FeatureList.findIndex(Feature obj)
Finds the index where the input object appears.
|
boolean |
FeatureCollection.getIsMasterCutVisibleInView(Feature masterCut,
CutView view)
Returns if a
MasterCutBuilder is visible in specified CutView . |
void |
FeatureBuilder.hideInternalParentFeatureAfterEdit(Feature parentFeature)
Re-suppress an internal parent feature (a slave feature) after it has been edited.
|
void |
FeatureList.insert(int location,
Feature object)
Inserts an object at the specified location
License requirements: None. |
Feature |
FeatureCollection.insertNewDesignGroup(Feature referenceDesignGroup)
Creates a new empty design group after a specified referece design group
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
ShowRelatedFacesBuilder.lockConstraint(Feature feature)
Locks the persistent constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
void |
FaceRecognitionBuilder.lockConstraint(Feature feature)
Locks the persistent constraint
License requirements: gateway ("UG GATEWAY") . |
void |
FeatureGroup.newAddMembers(Feature[] members,
boolean reorderTimestamp)
Deprecated.
Deprecated in NX8.5.1. Use
FeatureGroup.addMembersWithRelocation(nxopen.features.Feature[], boolean, boolean) instead.
|
void |
FeatureGroup.newRemoveMembers(Feature[] members,
boolean reorderTimestamp)
Removes given features from the feature group.If reorderTimestamp flag is ture, timestamp of remain member features will be made sequential.
|
boolean |
SelectFeatureList.remove(Feature object)
Remove specified object from list.
|
boolean |
SelectFeatureList.remove(Feature object,
View view)
Remove specified object from list.
|
boolean |
SelectFeatureList.remove(InferSnapType.SnapType snapType,
Feature selection1,
View view1,
Point3d point1,
Feature selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectFeatureList.removeArray(Feature[] objects)
Remove specified objects from list.
|
void |
UntrimBuilder.removeParameter(Feature untrimFeature)
Removes parameters of feature.
|
void |
FeatureCollection.reorderFeature(Feature[] features,
Feature target,
FeatureCollection.ReorderType beforeOrAfter)
Reorders the Feature with respect to the given feature
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
FeatureCollection.reorderFeature(Feature[] features,
Feature target,
FeatureCollection.ReorderType beforeOrAfter)
Reorders the Feature with respect to the given feature
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
FeatureCollection.reorganizeFeature(Feature[] features,
Feature target,
FeatureCollection.ReorderType beforeOrAfter)
Reorganizes the Feature with respect to the given feature across the part module
License requirements: usr_defined_features ("USER DEFINED FEATURES") . |
void |
FeatureCollection.reorganizeFeature(Feature[] features,
Feature target,
FeatureCollection.ReorderType beforeOrAfter)
Reorganizes the Feature with respect to the given feature across the part module
License requirements: usr_defined_features ("USER DEFINED FEATURES") . |
SketchConversionReport |
FeatureCollection.replaceWithIndependentSketch(Feature[] features)
Replace the given features with Independent Sketch
License requirements: None. |
void |
SelectFeatureList.setArray(Feature[] objects)
Sets the list of objects in the selection list.
|
void |
FeatureList.setContents(Feature[] objects)
Sets the contents of the entire list.
|
void |
FeatureCollection.setEditWithRollbackFeature(Feature feature)
Sets the feature being edited with rollback
License requirements: None. |
void |
WavePointBuilder.setFrecAtTimeStamp(Feature terminalFrec)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
void |
MirrorBodyBuilder.setFrecAtTimeStamp(Feature terminalFrec)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
void |
ExtractFaceBuilder.setFrecAtTimeStamp(Feature terminalFrec)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
void |
CompositeCurveBuilder.setFrecAtTimeStamp(Feature terminalFrec)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING") . |
void |
DeformDefinitionBuilder.setMemberFeatures(Feature[] memberFrecs)
Sets the list of member feature records for deform definition feature.
|
void |
FeatureBuilder.setParentFeatureInternal(Feature parentFeature)
Set the parent features which would be internal or slaves to the feature
being created or commited
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
PatternFeatureBuilder.setReferencesToReuse(Feature inputFeature,
NXObject[] referencesFromInputFeatures)
Sets the references or selections from the input features which are to be reused for all instances.
|
void |
MirrorBuilder.setReferencesToReuse(Feature inputFeature,
NXObject[] referencesFromInputFeatures)
Sets the references or selections from the input features which are to be reused for mirror.
|
void |
MidSurfaceByFacePairsBuilder.setupFacePairInContext(Feature facePair)
Set face pair to edit
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
SelectFeature.setValue(Feature selection)
Sets the object being selected
License requirements: None. |
void |
SelectFeature.setValue(Feature selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectFeatureList.setValueWithCaeSetObjectInfo(Feature selection,
CaeObjectType.CaeSubType caeSubType,
int caeSubId)
Deprecated.
Deprecated in NX10.0.0. Use other versions of
SelectObjectList.add(nxopen.TaggedObject) .
|
void |
SelectFeature.setValueWithCaeSetObjectInfo(Feature selection,
CaeObjectType.CaeSubType caeSubType,
int caeSubId)
Deprecated.
Deprecated in NX10.0.0. Use other versions of
SelectObject.setValue(nxopen.TaggedObject) .
|
boolean |
SelectFeatureList.setValueWithSnap(InferSnapType.SnapType snapType,
Feature selection1,
View view1,
Point3d point1,
Feature selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectFeature.setValueWithSnap(InferSnapType.SnapType snapType,
Feature selection1,
View view1,
Point3d point1,
Feature selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
FeatureBuilder.showInternalParentFeatureForEdit(Feature parentFeature)
Unsuppress an internal parent feature (a slave feature) so it can be edited.
|
EditWithRollbackManager |
FeatureCollection.startEditWithRollbackManager(Feature featureToEdit,
int featureEditMark)
Creates a
EditWithRollbackManager
License requirements: solid_modeling ("SOLIDS MODELING") Created in NX11.0.0 |
void |
FeatureCollection.suppressFeatures(Feature[] features)
Suppress the given features
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
FeatureList.swap(Feature object1,
Feature object2)
Exchanges the position of two objects inside the list.
|
void |
ShowRelatedFacesBuilder.unlockConstraint(Feature feature)
Unlocks the persistent constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING") . |
void |
FaceRecognitionBuilder.unlockConstraint(Feature feature)
Unlocks the persistent constraint
License requirements: gateway ("UG GATEWAY") . |
void |
FeatureBuilder.unsetParentFeatureInternal(Feature parentFeature)
Set the internal parent feature of the feature being edited to external
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
Feature[] |
FeatureCollection.unsuppressFeatures(Feature[] features)
Unsuppress the given features
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Interface and Description |
---|---|
interface |
AdvancedFlange
Represents an advanced flange feature
To create or edit an instance of this class, use AdvancedFlangeBuilder Created in NX11.0.0 |
interface |
Joggle
Represents a joggle feature
To create or edit an instance of this class, use JoggleBuilder Created in NX11.0.0 |
interface |
LighteningCutout
Represents a lightening cutout feature
To create or edit an instance of this class, use LighteningCutoutBuilder Created in NX11.0.0 |
interface |
MultiFlange
Represents a multi flange feature
To create or edit an instance of this class, use MultiFlangeBuilder Created in NX12.0.0 |
Modifier and Type | Method and Description |
---|---|
Feature |
TabBuilder.updateReferenceCurves()
This is only applicable for base tab created with bends.
|
Modifier and Type | Method and Description |
---|---|
AdvancedFlangeBuilder |
SheetmetalManager.createAdvancedFlangeBuilder(Feature joggle)
Creates a
AdvancedFlangeBuilder
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") Created in NX11.0.0 |
AeroLighteningCutoutBuilder |
AeroSheetmetalManager.createAeroLighteningCutoutBuilder(Feature aeroLighteningCutout)
Creates a
AeroLighteningCutoutBuilder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") Created in NX5.0.0 |
BeadBuilder |
SheetmetalManager.createBeadFeatureBuilder(Feature bead)
Create a NXSM Bead feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
BendBuilder |
SheetmetalManager.createBendFeatureBuilder(Feature bend)
Create a NXSM Bend feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
BendTaperBuilder |
SheetmetalManager.createBendTaperBuilder(Feature bendTaper)
Create a NXSM Bend taper feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
BreakCornerBuilder |
SheetmetalManager.createBreakCornerFeatureBuilder(Feature brcorner)
Create a NXSM Break Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
BridgeTransitionBuilder |
SheetmetalManager.createBridgeTransitionBuilder(Feature transition)
Creates a
BridgeTransitionBuilder
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal") Created in NX5.0.2 |
ClosedCornerBuilder |
SheetmetalManager.createClosedCornerFeatureBuilder(Feature closedCorner)
Create a NXSM Closed Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
ContourFlangeBuilder |
SheetmetalManager.createContourFlangeFeatureBuilder(Feature contourFlange)
Create a NXSM Contour Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
ConvertToSheetmetalBuilder |
SheetmetalManager.createConvertToSheetmetalFeatureBuilder(Feature convertToSheetMetal)
Create a NXSM Convert To Sheetmetal feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
DimpleBuilder |
SheetmetalManager.createDimpleFeatureBuilder(Feature dimple)
Create a NXSM Dimple feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
DrawnCutoutBuilder |
SheetmetalManager.createDrawnCutoutFeatureBuilder(Feature dCutout)
Create a NXSM Drawn Cutout feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
EdgeRipBuilder |
SheetmetalManager.createEdgeRipFeatureBuilder(Feature edgeRip)
Create a NXSM Edge Rip feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
EditBendBuilder |
SheetmetalManager.createEditBendBuilder(Feature editBend)
Creates a
EditBendBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal") Created in NX7.5.0 |
AeroFlangeBuilder |
AeroSheetmetalManager.createFlangeBuilder(Feature aerosmFlange)
Create flange builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") . |
FlangeBuilder |
SheetmetalManager.createFlangeFeatureBuilder(Feature dCutout)
Create a NXSM Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
FlatPatternBuilder |
SheetmetalManager.createFlatPatternBuilder(Feature flatPattern)
Create a NXSM Flat Pattern feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
FlatPatternBuilder |
AeroSheetmetalManager.createFlatPatternBuilder(Feature aerosmUnform)
Creates a
FlatPatternBuilder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") Created in NX6.0.0 |
FlatSolidBuilder |
AeroSheetmetalManager.createFlatSolidBuilder(Feature aerosmUnform)
Create flat solid builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") . |
FlatSolidBuilder |
SheetmetalManager.createFlatSolidFeatureBuilder(Feature flatSolid)
Create a NXSM Flat Solid feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
FlexibleCableBuilder |
SheetmetalManager.createFlexibleCableBuilder(Feature flexibleCable)
Creates a
FlexibleCableBuilder
License requirements: nx_flexible_pcb ("NX Flexible PCB") Created in NX6.0.0 |
GussetBuilder |
SheetmetalManager.createGussetBuilder(Feature gusset)
|
HemFlangeBuilder |
SheetmetalManager.createHemFlangeFeatureBuilder(Feature hemFalnge)
Create hem flange feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
JogBuilder |
SheetmetalManager.createJogFeatureBuilder(Feature jog)
Create a NXSM Jog feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
JoggleBuilder |
SheetmetalManager.createJoggleBuilder(Feature joggle)
Creates a
JoggleBuilder
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") Created in NX11.0.0 |
AeroJoggleBuilder |
AeroSheetmetalManager.createJoggleBuilder(Feature aerosmJoggle)
Create joggle builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") . |
LoftedFlangeBuilder |
SheetmetalManager.createLoftedFlangeFeatureBuilder(Feature lflange)
Create a NXSM Lofted Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
LouverBuilder |
SheetmetalManager.createLouverFeatureBuilder(Feature louver)
Create a NXSM Louver feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
MetaformBuilder |
SheetmetalManager.createMetaformBuilder(Feature metaform)
Creates a
MetaformBuilder
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") Created in NX7.5.0 |
MigratedPanelBuilder |
SheetmetalManager.createMigratedPanelFeatureBuilder(Feature migratedPanel)
Create a NXSM Migrated Panel feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
NormalCutoutBuilder |
SheetmetalManager.createNormalCutoutFeatureBuilder(Feature ncutout)
Create a NXSM Normal Cutout feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
RebendBuilder |
SheetmetalManager.createRebendFeatureBuilder(Feature rebend)
Create a NXSM Rebend feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
AeroReformBuilder |
AeroSheetmetalManager.createReformBuilder(Feature aerosmReform)
Create reform builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") . |
ResizeBendAngleBuilder |
SheetmetalManager.createResizeBendAngleBuilder(Feature resizeBendAngle)
Creates Resize Bend Angle Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
ResizeBendRadiusBuilder |
SheetmetalManager.createResizeBendRadiusFeatureBuilder(Feature resizeBendRadius)
Create a Resize Bend Radius Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
ResizeNeutralFactorBuilder |
SheetmetalManager.createResizeNeutralFactorBuilder(Feature resizeNeutralFactor)
Creates Resize Neutral Factor Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
SheetMetalFromSolidBuilder |
SheetmetalManager.createSheetMetalFromSolidBuilder(Feature sheetMetalFromSolid)
Creates a
SheetMetalFromSolidBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal") Created in NX6.0.0 |
SolidPunchBuilder |
SheetmetalManager.createSolidPunchBuilder(Feature solidPunch)
Creates a
SolidPunchBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal") Created in NX5.0.0 |
TabBuilder |
SheetmetalManager.createTabFeatureBuilder(Feature tab)
Create a NXSM Tab feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
ThreeBendCornerBuilder |
SheetmetalManager.createThreeBendCornerFeatureBuilder(Feature threeBendCorner)
Create a NXSM Three Bend Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
UnbendBuilder |
SheetmetalManager.createUnbendFeatureBuilder(Feature unbend)
Create a NXSM Unbend feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
AeroUnformBuilder |
AeroSheetmetalManager.createUnformBuilder(Feature aerosmUnform)
Create unform builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN") . |
Modifier and Type | Interface and Description |
---|---|
interface |
AlongGuideCut
Represents a corner cut feature
To create or edit an instance of this class, use AlongGuideCutBuilder Created in NX8.5.0 |
interface |
Bracket
Represents a bracket feature.
|
interface |
BulkHeads
Represents a bulk head feature
To create or edit an instance of this class, use BulkHeadsBuilder Created in NX5.0.0 |
interface |
CollarPlate
Represents a collar plate feature.
|
interface |
ConceptFromSpreadsheet
Represents a concept from spreadsheet feature
To create or edit an instance of this class, use ConceptFromSpreadsheetBuilder Created in NX8.5.0 |
interface |
CornerCut
Represents a corner cut feature
To create or edit an instance of this class, use CornerCutBuilder Created in NX8.5.0 |
interface |
CustomBracket
Represents a custom bracket feature
To create or edit an instance of this class, use CustomBracketBuilder Created in NX7.5.0 |
interface |
Cutout2
Represents a cutout2 feature
To create or edit an instance of this class, use Cutout2Builder Created in NX8.0.0 |
interface |
Deck
Represents a Deck feature in Basic Design.
|
interface |
Decks
Represents a decks feature
To create or edit an instance of this class, use DecksBuilder Created in NX5.0.0 |
interface |
Divide
Represents divide feature(s)
To create or edit an instance of this class, use DivideBuilder Created in NX11.0.0 |
interface |
DvToMvMapping
Represents a plate feature
To create or edit an instance of this class, use DvToMvMappingBuilder Created in NX8.5.0 |
interface |
EdgeCut
Represents a edge cut feature
To create or edit an instance of this class, use EdgeCutBuilder Created in NX8.5.0 |
interface |
EdgeReinforcement
Represents a edge reinforcement feature.
|
interface |
EndCut
Represents an end cut feature
To create or edit an instance of this class, use EndCutBuilder Created in NX8.0.0 |
interface |
ExcessMaterial
Represents a excess material feature
To create or edit an instance of this class, use ExcessMaterialBuilder Created in NX7.5.0 |
interface |
ExpansionDrawing
Represents a expansion drawing feature.
|
interface |
FrameBarOut
Represents a FrameBarOut
To create or edit an instance of this class, use FrameBarOutBuilder Created in NX5.0.0 |
interface |
GenericPlateSystem
Represents a Generic Plate System feature.
|
interface |
Hull
Represents a Hull feature.
|
interface |
InsertSheetBody
Represents a insert sheet body feature
To create or edit an instance of this class, use InsertSheetBodyBuilder Created in NX5.0.0 |
interface |
InverseBendingLines
Represents a inverse bending lines feature
To create or edit an instance of this class, use InverseBendingLinesBuilder Created in NX8.0.0 |
interface |
ItFrames
Represents a Inter Transverse Frame feature
To create or edit an instance of this class, use ItFramesBuilder Created in NX5.0.0 |
interface |
KnuckledProfiles
Represents a knuckled profiles manufacturing preparation feature
To create or edit an instance of this class, use KnuckledProfilesBuilder Created in NX5.0.3 |
interface |
LongitudinalBulkhead
Represents a Longitudinal Bulkhead feature.
|
interface |
MainDimensions
Represents a main dimensions feature
To create or edit an instance of this class, use MainDimensionsBuilder Created in NX5.0.0 |
interface |
ManufacturingOut
Represents a ManufacturingOut
To create or edit an instance of this class, use ManufacturingOutBuilder Created in NX5.0.0 |
interface |
ManufacturingPreparation
Represents a manufacturing preparation feature
To create or edit an instance of this class, use ManufacturingPreparationBuilder Created in NX8.0.2 |
interface |
MarkingLine
Represents a marking line feature.
|
interface |
MarkingLineDesign
Represents a marking line feature.
|
interface |
OrientationDefinition
Represents a Orientation SubObject.
|
interface |
Pillar
Represents a Pillar feature
To create or edit an instance of this class, use PillarBuilder Created in NX8.0.0 |
interface |
PillarSystem
Represents a pillar system feature.
|
interface |
PinJig
Represents a Pinjig feature
To create or edit an instance of this class, use PinJigBuilder Created in NX10.0.0 |
interface |
Plate
Represents a plate feature
To create or edit an instance of this class, use PlateBuilder Created in NX8.0.0 |
interface |
PlateChamfer
Represents a plate chamfer feature
To create or edit an instance of this class, use PlateChamferBuilder Created in NX8.0.0 |
interface |
PlateDivide
Represents a plate divide feature
To create or edit an instance of this class, use PlateDivideBuilder Created in NX11.0.0 |
interface |
PlatePreparation
Represents a ship plate preparation feature
To create or edit an instance of this class, use PlatePreparationBuilder Created in NX8.0.0 |
interface |
PlateSystem
Represents a Plate System feature.
|
interface |
Profile
Represents a profile feature
To create or edit an instance of this class, use ProfileBuilder Created in NX7.5.0 |
interface |
ProfileCutout
Represents a profile cutout feature for NX8.
|
interface |
ProfileList
Represents a profile list feature
To create or edit an instance of this class, use ProfileListBuilder Created in NX5.0.0 |
interface |
ProfileSystem
Represents a profile system feature.
|
interface |
ProfileTransition
Represents a profile transition feature
To create or edit an instance of this class, use ProfileTransitionBuilder Created in NX9.0.0 |
interface |
ReferenceLine
Represents a reference line feature.
|
interface |
RollingLine
Represents a rolling line feature.
|
interface |
Seam
Represents a ship design seam feature.
|
interface |
ShellExpansion
Represents a shell expansion feature
To create or edit an instance of this class, use ShellExpansionBuilder Created in NX7.5.0 |
interface |
ShellTemplate
Represents a shell template feature.
|
interface |
ShipCoordinates
Represents a ship coordinates feature
Ship Coordinates is not supported in KF. |
interface |
ShipCutout
Represents a ship cutout feature
To create or edit an instance of this class, use ShipCutoutBuilder Created in NX7.5.0 |
interface |
ShipEndCut
Represents a ship end cut feature
To create or edit an instance of this class, use ShipEndCutBuilder Created in NX7.5.0 |
interface |
ShipFlatPattern
Deprecated.
Deprecated in NX8.0.0. Use
PlatePreparationBuilder .CreatePlatePreparationBuilder() instead.
|
interface |
ShipIntersections
Represents a ship intersection feature
To create or edit an instance of this class, use ShipIntersectionsBuilder Created in NX7.5.0 |
interface |
ShipProfileCutout
Represents a profile cutout feature for NX75 using sketch expression modifier block.
|
interface |
ShipSection
Represents a ship section feature
To create or edit an instance of this class, use ShipSectionBuilder Created in NX7.5.0 |
interface |
ShipTrimBody
Represents a ship trim body feature
To create or edit an instance of this class, use ShipTrimBodyBuilder Created in NX9.0.1 |
interface |
SmartRule
Represents a smart rule feature.
|
interface |
SplitStandardPart
Represents a split standard part feature.
|
interface |
StandardPart
Represents a standard part feature.
|
interface |
StandardPartSCAssist
Represents
To create or edit an instance of this class, use StandardPartFrameworkBuilder Created in NX9.0.0 |
interface |
SteelCollarPlate
Represents a collar plate steel feature
To create or edit an instance of this class, use SteelCollarPlateBuilder Created in NX7.5.0 |
interface |
SteelDistribution
Represents a steel distribution feature
To create or edit an instance of this class, use SteelDistributionBuilder Created in NX5.0.0 |
interface |
SteelInsulation
Represents a steel insulation feature.
|
interface |
SteelSupport
Represents a steel support feature
To create or edit an instance of this class, use SteelSupportBuilder Created in NX7.5.0 |
interface |
SteelVentHoles
Represents a ship vent holes feature
To create or edit an instance of this class, use SteelVentHolesBuilder Created in NX7.5.0 |
interface |
Stiffener
Represents a stiffener feature
To create or edit an instance of this class, use StiffenerBuilder Created in NX8.0.0 |
interface |
StiffenerSystem
Represents a stiffener system feature.
|
interface |
SubSystems
Represents a sub systems feature.
|
interface |
TraceLines
Represents a trace lines feature
To create or edit an instance of this class, use TraceLinesBuilder Created in NX7.5.0 |
interface |
TransFrame
Represents a TransVerse Frame feature
To create or edit an instance of this class, use TransFrameBuilder Created in NX5.0.0 |
interface |
TransverseBulkhead
Represents a Transverse Bulkhead feature.
|
interface |
UpdateShipLibrary
Represents a update ship library feature
To create or edit an instance of this class, use UpdateShipLibraryBuilder Created in NX5.3.0 |
interface |
VentHolesMarking
Represents a vent holes marking feature
To create or edit an instance of this class, use VentHolesMarkingBuilder Created in NX5.0.3 |
interface |
VentilationHoles2
Represents a ventilation holes2 feature
To create or edit an instance of this class, use VentilationHoles2Builder Created in NX8.0.0 |
interface |
WeldCut
Represents a weld cut feature
To create or edit an instance of this class, use WeldCutBuilder Created in NX7.5.0 |
interface |
WeldCut2
Represents a weld cut2 feature
To create or edit an instance of this class, use WeldCut2Builder Created in NX8.0.1 |
Modifier and Type | Method and Description |
---|---|
Feature |
ShipPreparationInfo.basicDesignFeature()
Returns the basic design feature related to this information.
|
Feature |
DvToMvMappingBuilder.designFeatureGroup()
Returns the design feature group.
|
Feature |
ShipPreparationInfo.feature()
Returns the feature generating this information.
|
Feature[] |
SteelFeatureSpreadsheetBuilder.getImportedSketches()
This method retrieves all the features that are imported into current work part.
|
Feature |
DvToMvMappingBuilder.mfgFeatureGroup()
Returns the mfg feature group.
|
Feature |
RemoveSplitBuilder.splitFeatureGroup()
Returns the split feature group.
|
Modifier and Type | Method and Description |
---|---|
boolean |
MarkingLineDesignBuilder.isMarkingLineFeature(Feature frecTag)
Is the feature a marking line feature
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
void |
FeaturesToTagBuilder.manageFeatureTag(boolean addMark,
Feature featureToMark)
Manages (set or unset) the ship manufacturing object on selected features
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
void |
ShipPreparationInfo.setBasicDesignFeature(Feature feature)
License requirements: nx_ship_basic ("Ship Basic Design") . |
void |
DvToMvMappingBuilder.setDesignFeatureGroup(Feature designFeatureGroup)
License requirements: nx_ship_detail ("Ship Detail Design") . |
void |
ShipPreparationInfo.setFeature(Feature feature)
License requirements: nx_ship_basic ("Ship Basic Design") . |
void |
DvToMvMappingBuilder.setMfgFeatureGroup(Feature mfgFeatureGroup)
License requirements: nx_ship_detail ("Ship Detail Design") . |
void |
RemoveSplitBuilder.setSplitFeatureGroup(Feature tSplitFeatureGroup)
License requirements: nx_ship_detail ("Ship Detail Design") . |
Modifier and Type | Interface and Description |
---|---|
interface |
SubdivisionBody
Represents a subdivision body feature.
|
Modifier and Type | Interface and Description |
---|---|
interface |
AllAroundVision
Represents an all-around vision feature
To create or edit an instance of this class, use AllAroundVisionBuilder Created in NX8.5.0 |
interface |
BumperPendulum
Represents a bumper pendulum feature
To create or edit an instance of this class, use BumperPendulumBuilder Created in NX8.5.0 |
interface |
CloseRangeVisibility
Represents a close range visibility feature
To create or edit an instance of this class, use CloseRangeVisibilityBuilder Created in NX8.5.0 |
interface |
CrashBarrier
Represents a crash barrier feature
To create or edit an instance of this class, use CrashBarrierBuilder Created in NX8.5.0 |
interface |
DynamicCurb
Represents a dynamic curb feature
To create or edit an instance of this class, use DynamicCurbBuilder Created in NX8.5.0 |
interface |
GroundClearance
Represents a ground clearance feature.
|
interface |
HeadImpact
Represents a head impact feature.
|
interface |
HeadImpactAPillar
Represents a head impact a-pillar feature.
|
interface |
HeadImpactBPillar
Represents a head impact b-pillar feature.
|
interface |
HeadImpactFrontHeader
Represents a head impact front header feature.
|
interface |
HeadImpactOPillar
Represents a head impact side rail feature.
|
interface |
HeadImpactOtherRail
Represents a head impact additional side rail feature.
|
interface |
HeadImpactRearHeader
Represents a head impact rear header feature.
|
interface |
HeadImpactRPillar
Represents a head impact rear pillar feature.
|
interface |
HeadImpactSideRail
Represents a head impact side rail feature.
|
interface |
HeadImpactUpperRoof
Represents a head impact upper roof feature.
|
interface |
HoodVisibility
Represents a hood visibility spline feature
To create or edit an instance of this class, use HoodVisibilityBuilder Created in NX6.0.0 |
interface |
InnerAngle
Represents an inner angle feature
To create or edit an instance of this class, use InnerAngleBuilder Created in NX8.5.0 |
interface |
Manikin
Represents a manikin automotive feature
To create or edit an instance of this class, use ManikinBuilder Created in NX7.5.0 |
interface |
MirrorCertification
Represents a mirror certification feature.
|
interface |
OilPan
Represents a oil pan feature
To create or edit an instance of this class, use OilPanBuilder Created in NX8.5.0 |
interface |
PedestrianProtection
Represents a pedestrian protection feature
To create or edit an instance of this class, use PedestrianProtectionBuilder Created in NX6.0.0 |
interface |
ReflectionData
Represents a reflection data feature
To create or edit an instance of this class, use ReflectionDataBuilder Created in NX6.0.0 |
interface |
SeatBeltAnchorage
Represents a seat belt anchorage feature
To create or edit an instance of this class, use SeatBeltAnchorageBuilder Created in NX6.0.0 |
interface |
Slope
Represents a Slope feature
To create or edit an instance of this class, use SlopeBuilder Created in NX8.5.0 |
interface |
StaticCurb
Represents a static curb feature
To create or edit an instance of this class, use StaticCurbBuilder Created in NX8.5.0 |
interface |
TireEnvelope
Represents a tire envelope feature
To create or edit an instance of this class, use TireEnvelopeBuilder Created in NX7.5.0 |
interface |
VehicleCoordinateSystem
Represents a vehicle coordinate system feature
To create or edit an instance of this class, use VehicleCoordinateSystemBuilder Created in NX7.0.0 |
interface |
VisionPlane
Represents a vision plane feature.
|
interface |
WheelCovering
Represents a wheel covering feature
To create or edit an instance of this class, use WheelCoveringBuilder Created in NX8.5.0 |
interface |
WheelFixing
Represents a wheel fixing feature
To create or edit an instance of this class, use WheelFixingBuilder Created in NX8.5.0 |
interface |
WindshieldDatum
Represents a windshield datum feature.
|
Modifier and Type | Field and Description |
---|---|
Feature[] |
EntityUsageInfo.DependentFeaturesData.dependentfeatures
dependent features
|
Modifier and Type | Method and Description |
---|---|
void |
LocalUntrimBuilder.setCurrentFeature(Feature object)
Records the current feature before constructing the dialog.
|
void |
WaveLinkRepository.setLink(Feature linkFeature)
Set the link created by interpart selection
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
Modifier and Type | Interface and Description |
---|---|
interface |
ColumnFeature
Represents a column feature feature
To create or edit an instance of this class, use ColumnFeatureBuilder Created in NX9.0.0 |
interface |
ConveyorStationFeature
Represents a conveyor station feature feature
To create or edit an instance of this class, use ConveyorStationFeatureBuilder Created in NX9.0.0 |
interface |
CoverFeature
Represents a cover feature
To create or edit an instance of this class, use CoverFeatureBuilder Created in NX9.0.0 |
interface |
DiamondConnectorFeature
Represents a typed connector feature feature
To create or edit an instance of this class, use TypedConnectorFeatureBuilder Created in NX9.0.0 |
interface |
GateFeature
Represents a gate feature
To create or edit an instance of this class, use GateFeatureBuilder Created in NX9.0.0 |
interface |
HeadConnectorFeature
Represents a typed connector feature feature
To create or edit an instance of this class, use TypedConnectorFeatureBuilder Created in NX9.0.0 |
interface |
HoleFeature
Represents a hole feature feature
To create or edit an instance of this class, use HoleFeatureBuilder Created in NX9.0.0 |
interface |
RailingFeature
Represents a rail feature
To create or edit an instance of this class, use RailingFeatureBuilder Created in NX9.0.0 |
interface |
RailOpeningFeature
Represents a rail Opening feature
To create or edit an instance of this class, use RailOpeningFeatureBuilder Created in NX9.0.0 |
interface |
TailConnectorFeature
Represents a typed connector feature feature
To create or edit an instance of this class, use TypedConnectorFeatureBuilder Created in NX9.0.0 |
interface |
TypedConnectorFeature
Represents a typed connector feature feature
To create or edit an instance of this class, use TypedConnectorFeatureBuilder Created in NX9.0.0 |
Modifier and Type | Method and Description |
---|---|
void |
RailOpeningFeatureBuilder.setRailingFeature(Feature railingFrec)
License requirements: ld_line_designer ("FULL LINE DESIGNER") . |
Modifier and Type | Method and Description |
---|---|
Feature[] |
CamBuilder.getCurveFeatures()
Returns the curve feature
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Feature |
CamBuilder.getExtrudeFeature()
Returns the extrude feature
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Modifier and Type | Method and Description |
---|---|
void |
CamBuilder.addCurveFeature(Feature curveFeature)
Sets one curve feature
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
CamBuilder.setCurveFeatures(Feature[] curveFeatures)
Sets the curve features
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
void |
CamBuilder.setExtrudeFeature(Feature extrudeFeature)
Sets the extrude feature
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER") . |
Modifier and Type | Interface and Description |
---|---|
interface |
DuctReinforcement
Represents a Duct Reinforcement feature used for creating/editing reinforcements
on the inside or outside of rectangular HVAC ducts.
|
interface |
FeaturePort
|
interface |
PlatformFeature
Represents a Platform feature.
|
interface |
WindCatcher
Represents a Wind Catcher feature.
|
Modifier and Type | Method and Description |
---|---|
Feature[] |
Stock.getFeatures()
Returns the sweep features that are created and controlled by this object.
|
Feature[] |
CopeCorner.getFeatures()
Returns the list of ROUTE_COPE features created to trim stocks.
|
Feature |
CopeCorner.getStockCopeFeature(Stock stock)
Get ROUTE_COPE feature applied the given stock at the cope corner
License requirements: routing_advanced ("Routing Advanced") . |
Modifier and Type | Method and Description |
---|---|
Stock.BodySegmentMapData |
Stock.getBodySegmentMap(Feature feature)
Given stock and a feature of the stock, returns solid body, stock segments and path segments that produced the body.
|
Modifier and Type | Method and Description |
---|---|
void |
NavigatorCollection.editFeature(Feature tgFeat)
Edit feature.
|
Modifier and Type | Interface and Description |
---|---|
interface |
Runner
Represents a runner feature
To create or edit an instance of this class, use RunnerBuilder Created in NX11.0.0 |
Modifier and Type | Field and Description |
---|---|
Feature |
AddReusableFeatureCollection.InputData.feature
Reusable feature in edit mode
|
Modifier and Type | Method and Description |
---|---|
Feature |
ReusePositioningObjectBuilder.createOffsetCsysFromSeed()
Create offset CSYS from seed CSYS
License requirements: None. |
Feature |
ReusePositioningObjectBuilder.editFeatureGroup()
Returns the feature group created after reuse paste
License requirements: None. |
Feature |
FastenerAssy.findPositioningFeatureSet()
Find the positioning feature set by pattern sketch
License requirements: None. |
Feature |
AddReusablePart.findPositioningFeatureSet()
Find the positioning feature set by pattern sketch
License requirements: None. |
Feature |
ReusePositioningObjectBuilder.offsetDatumCsys()
Returns the offset datum CSYS
License requirements: None. |
Feature |
ReusableObjectPasteBuilder.positioningFeatSet()
Returns the positioning feature set by pattern sketch
License requirements: None. |
Feature |
SlugRetentionBuilder.slugRetentionFeature()
Returns the slug retention feature
License requirements: None. |
Feature |
DieDesDrawPunchBuilder.tfeatureSet()
Returns the feature set tag.
|
Feature |
DieDesDrawDieBuilder.tfeatureSet()
Returns the feature set tag.
|
Modifier and Type | Method and Description |
---|---|
DieDesDrawDieBuilder |
AutoDieCollection.createDieDesDrawDieBuilder(Feature featureSet)
Creates a Die Design Draw Die builder.
|
DieDesDrawPunchBuilder |
AutoDieCollection.createDieDesDrawPunchBuilder(Feature featureSet)
Creates a Die Design Draw Punch builder.
|
DieDesignLowerBinderBuilder |
AutoDieCollection.createDieDesignLowerBinderBuilder(Feature frec)
Creates a Die Design Lower Binder Builder
License requirements: ug_die_design ("Die Design") . |
DieDesignTrimPostBuilder |
AutoDieCollection.createDieDesignTrimPostBuilder(Feature frec)
Creates a Die Design Trim Post Builder
License requirements: ug_die_design ("Die Design") . |
DieEngDefineProductOrientationBuilder |
AutoDieCollection.createDieEngDefineProductOrientationBuilder(Feature featureSet)
Creates a Die Engineer Define Product Orientation builder.
|
DieEngDieTipBuilder |
AutoDieCollection.createDieEngDieTipBuilder(Feature frec)
Creates a Die Engineer Die Tip Builder
License requirements: die_engineering ("DIE ENGINEERING") . |
DieEngFormTaskBuilder |
AutoDieCollection.createDieEngFormTaskBuilder(Feature dieEngFormTask)
Creates the form task feature builder.
|
ReusePositioningObjectBuilder |
ReusableObjectManager.createPositioningBuilder(Feature positioningObject)
Creates a
ReusePositioningObjectBuilder
License requirements: None. |
void |
ReusePositioningObjectBuilder.setEditFeatureGroup(Feature featureGroup)
License requirements: None. |
void |
ReusePositioningObjectBuilder.setOffsetDatumCsys(Feature offsetCsys)
License requirements: None. |
void |
SlugRetentionBuilder.setSlugRetentionFeature(Feature slugRetentionFeature)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
DieDesDrawPunchBuilder.setTfeatureSet(Feature tFeatureSet)
License requirements: ug_die_design ("Die Design") . |
void |
DieDesDrawDieBuilder.setTfeatureSet(Feature tFeatureSet)
License requirements: ug_die_design ("Die Design") . |
Constructor and Description |
---|
InputData(String krxFileInitial,
String libNameInitial,
String libPathInitial,
NXObject entityInitial,
Point3d positionInitial,
Feature featureInitial)
Constructor for the InputData object.
|
Modifier and Type | Method and Description |
---|---|
Feature |
Instantiation.getFeature()
Returns the feature in the User Defined Template object
License requirements: None. |
Modifier and Type | Interface and Description |
---|---|
interface |
AutoPoint
This class will automatically create weld points from selected components
To create or edit an instance of this class, use AutoPointBuilder Created in NX6.0.0 |
interface |
CompoundWeld
Represents a compound weld feature.
|
interface |
DatumPin
Represents a Weld Datum Pin feature
To create or edit an instance of this class, use DatumPinBuilder Created in NX8.5.0 |
interface |
DatumSurface
Represents a Weld Datum Surface feature
To create or edit an instance of this class, use DatumSurfaceBuilder Created in NX8.5.0 |
interface |
EdgePrep
Represents a Weld Edge Prep feature
To create or edit an instance of this class, use EdgePrepBuilder Created in NX8.0.0 |
interface |
Extract
Represents a Linked Feature created in the Weld Assistant.
|
interface |
Fill
Represents a Weld Fill feature
To create or edit an instance of this class, use WeldFillBuilder Created in NX7.5.0 |
interface |
Fillet
Represents a Weld Fillet Feature.
|
interface |
Groove
Represents a WeldGroove feature.
|
interface |
Jointmark
Represents a Weld Jointmark Feature.
|
interface |
JointmarkElement
Represents a Weld.JointmarkElement Feature.
|
interface |
PlugSlot
create a PlugSlot feature for Weld
To create or edit an instance of this class, use PlugSlotBuilder Created in NX8.0.0 |
interface |
PointMark
Represents a Weld PointMark Feature.
|
interface |
PointMarkPoint
Represents a Weld.PointMarkPoint Feature.
|
interface |
SurfaceWeld
Represents a surface weld feature
To create or edit an instance of this class, use SurfaceWeldBuilder Created in NX9.0.0 |
interface |
Transform
Represents a Weld Transform Feature.
|
interface |
UserDefinedWeld
Represents a User Defined Weld feature.
|
interface |
WeldBead
Represents a Weld Bead feature
To create or edit an instance of this class, use WeldBeadBuilder Created in NX7.5.0 |
interface |
WeldGroove
Represents a Weld Groove Feature
To create or edit an instance of this class, use WeldGrooveBuilder Created in NX9.0.0 |
interface |
WeldJoint
Represents a weld joint feature
To create or edit an instance of this class, use WeldJointBuilder Created in NX8.0.0 |
interface |
WeldPoint
Represents a WeldPoint feature.
|
Modifier and Type | Field and Description |
---|---|
Feature |
WeldPointExitBuilder.FeatureInfo.feature
the newly created or edited feature
|
Feature |
WeldObjectBuilder.FeatureInfo.feature
the newly created or edited feature
|
Feature[] |
WeldPointBuilder.FaceSetData.frecs
the face set wave linked frecs
|
Feature |
WeldPointExitBuilder.FeatureInfo.parent
the parent if method used was mirror or translate
|
Modifier and Type | Method and Description |
---|---|
Feature |
JointmarkBuilder.getReferenceSheet()
Returns the Reference Sheet feature
License requirements: ugweld ("UG WELD") . |
Feature |
WeldPointBuilder.getReferenceSheets()
The refernence sheet feature
License requirements: ugweld ("UG WELD") . |
Feature |
JointmarkBuilder.updateReferenceSheet(boolean facesModified)
Prepares a Reference Sheet for placing Jointmark features.
|
Modifier and Type | Method and Description |
---|---|
void |
CustomManager.convertLegacy(Feature[] fsetFeatures)
Method to convert selected legacy weld point feature sets to the
PointMarkPoint class
License requirements: None. |
void |
CustomManager.convertLegacy(Feature[] fsetFeatures,
boolean createSingleFeatures)
Method to convert weld point feature sets to the
PointMarkPoint class
License requirements: None. |
void |
CustomManager.convertTransformWeld(Feature[] selectedObjects)
Method to convert
Transform to their parent type. |
AutoPointBuilder |
WeldManager.createAutoPointBuilder(Feature unused)
Creates a
AutoPointBuilder object. |
ConnectedFaceFinderBuilder |
WeldManager.createConnectedFaceFinderBuilder(Feature[] weldFeatures)
Creates a builder for running the Connected Face Finder utility.
|
EasyPatternBuilder |
WeldManager.createEasyPatternBuilder(Feature patternFeatureSet)
Creates a
EasyPatternBuilder object. |
FilletBuilder |
WeldManager.createFilletBuilder(Feature feature)
Creates a
FilletBuilder object. |
PlugSlotBuilder |
WeldManager.createPlugSlotBuilder(Feature feature)
Creates a
PlugSlotBuilder object. |
UserDefinedWeldBuilder |
WeldManager.createUserDefinedWeldBuilder(Feature featureSet)
|
WeldBeadBuilder |
WeldManager.createWeldBeadBuilder(Feature beadFeature)
Creates a
WeldBeadBuilder object. |
WeldGrooveBuilder |
WeldManager.createWeldGroove1Builder(Feature grooveFeature)
Creates a
WeldGrooveBuilder object. |
GrooveBuilder |
WeldManager.createWeldGrooveBuilder(Feature weldGroove)
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder instead.
|
WeldPointBuilder |
WeldManager.createWeldPointBuilder(Feature weldPoint)
Creates a
WeldPointBuilder object. |
JointmarkBuilder |
WeldManager.editSingleJointmarkFeature(Feature elementFeature)
Creates a
JointmarkBuilder object from a single element feature. |
boolean[] |
CustomManager.hasSourceFacesInWeldPart(Feature weldFeature)
Method to determine if a
JointmarkElement feature has source faces in the weld part. |
void |
EdgePrepValuesBuilder.readEdgePrepValues(Feature feature)
Reads the edge prep values from the feature.
|
void |
LocatorReferenceBuilder.setAdditionalReferenceFromFeature(Feature additionalReference)
Set additional references.
|
Constructor and Description |
---|
FeatureInfo(Feature featureInitial,
boolean isNewlyCreatedInitial)
Constructor for the FeatureInfo object.
|
FeatureInfo(Feature featureInitial,
WeldPointExitBuilder.MethodUsed methodUsedInitial,
Feature parentInitial,
boolean isNewlyCreatedInitial)
Constructor for the FeatureInfo object.
|
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.