Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.annotations |
Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations.
|
nxopen.assemblies |
Provides classes and interfaces for Assemblies.
|
nxopen.blockstyler |
Provides classes and interfaces for the Block Styler.
|
nxopen.cae |
Provides classes and interfaces relating to Advanced Simulation and Design Simulation.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.display |
Provides classes and interfaces for display.
|
nxopen.drafting |
Provides classes and interfaces for the Drafting.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.facet |
Provides classes and interfaces for Faceted Representations.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.subdivision |
Provides classes and interfaces for Manufacturing.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for the Vehicle Design.
|
nxopen.formboard |
Provides interfaces and classes to the Routing Electrical Formboard functionality.
|
nxopen.gateway |
Provides classes and interfaces for Gateway.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricanalysis.sectionanalysis |
Provides classes and interfaces for Section Analysis.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.layout2d |
Provides classes and interfaces for Manufacturing.
|
nxopen.mechatronics |
Provides classes and interfaces for Mechatronics.
|
nxopen.motion |
Provides classes and interfaces for Motion Simulation.
|
nxopen.pdm |
Provides classes and interfaces for PDM.
|
nxopen.positioning |
Provides classes and interfaces for Assembly Positioning and Constraints.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.routing.electrical |
Provides classes and interfaces for Routing Electrical.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.userdefinedobjects |
Provides classes and interfaces for User Defined Objects (UDOs).
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
Conic.OrientationData.center |
Point3d |
Measurement.DisplayMinimumDistanceData.closePoint1
Close point on first object
|
Point3d |
Measurement.MinimumDistanceData.closePoint1
Close point on first object
|
Point3d |
Measurement.DisplayMinimumDistanceData.closePoint2
Close point on second object
|
Point3d |
Measurement.MinimumDistanceData.closePoint2
Close point on second object
|
Point3d |
Selection.SelectObjectData.cursor
Absolute coordinates of cursor position.
|
Point3d |
Selection.SelectTaggedObjectData.cursor
Absolute coordinates of cursor position.
|
Point3d |
SectionElementData.Data.endPoint
End Point
|
Point3d |
SectionElementData.SectionElementData1.endPoint
End Point
|
Point3d |
Sketch.DimensionGeometry.helpPoint
help point
|
Point3d |
ISketchHelpedConstraint.HelpData.helpPoint1
The first help point.
|
Point3d |
ISketchHelpedConstraint.HelpData.helpPoint2
The second help point.
|
Point3d |
HumanPosturePredictionBuilder.ComputeHandCsysData.leftHandPosition
the position of left hand
|
Point3d |
PartCollection.MirrorPlaneDataOfMirrorPartData.mirrorplaneorigin
mirror plane origin
|
Point3d |
Sketch.ConstraintGeometryHelp.point
Ignored unless type is Point
|
Point3d |
SelectView.ValueData.point
selected object point
|
Point3d |
SelectTaggedObject.ValueData.point
selected object point
|
Point3d |
SelectSpline.ValueData.point
selected object point
|
Point3d |
SelectSmartObject.ValueData.point
selected object point
|
Point3d |
SelectSketch.ValueData.point
selected object point
|
Point3d |
SelectPoint.ValueData.point
selected object point
|
Point3d |
SelectPart.ValueData.point
selected object point
|
Point3d |
SelectObject.ValueData.point
selected object point
|
Point3d |
SelectNXObject.ValueData.point
selected object point
|
Point3d |
SelectLine.ValueData.point
selected object point
|
Point3d |
SelectISurface.ValueData.point
selected object point
|
Point3d |
SelectIParameterizedSurface.ValueData.point
selected object point
|
Point3d |
SelectICurve.ValueData.point
selected object point
|
Point3d |
SelectIBaseCurve.ValueData.point
selected object point
|
Point3d |
SelectFace.ValueData.point
selected object point
|
Point3d |
SelectEdge.ValueData.point
selected object point
|
Point3d |
SelectDisplayableObject.ValueData.point
selected object point
|
Point3d |
SelectDatumPlane.ValueData.point
selected object point
|
Point3d |
SelectCurve.ValueData.point
selected object point
|
Point3d |
SelectCoordinateSystem.ValueData.point
selected object point
|
Point3d |
SelectCartesianCoordinateSystem.ValueData.point
selected object point
|
Point3d |
SelectBody.ValueData.point
selected object point
|
Point3d |
SelectView.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectTaggedObject.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectSpline.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectSmartObject.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectSketch.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectPoint.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectPart.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectObject.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectNXObject.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectLine.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectISurface.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectIParameterizedSurface.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectICurve.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectIBaseCurve.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectFace.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectEdge.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectDisplayableObject.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectDatumPlane.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectCurve.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectCoordinateSystem.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectCartesianCoordinateSystem.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectBody.ValueWithSnapData.point1
first selected object point
|
Point3d |
DatumPlane.CornerPointsData.point1
First corner point of the datum plane
|
Point3d |
SelectView.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectTaggedObject.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectSpline.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectSmartObject.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectSketch.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectPoint.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectPart.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectObject.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectNXObject.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectLine.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectISurface.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectIParameterizedSurface.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectICurve.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectIBaseCurve.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectFace.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectEdge.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectDisplayableObject.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectDatumPlane.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectCurve.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectCoordinateSystem.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectCartesianCoordinateSystem.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectBody.ValueWithSnapData.point2
second selected object point
|
Point3d |
DatumPlane.CornerPointsData.point2
Second corner point of the datum plane
|
Point3d |
DatumPlane.CornerPointsData.point3
Third corner point of the datum plane
|
Point3d |
DatumPlane.CornerPointsData.point4
Fourth corner point of the datum plane
|
Point3d |
Selection.AskSelectionCursorPositionData.position |
Point3d |
HumanPosturePredictionBuilder.HandFootCsysData.position
the position of hand or foot
|
Point3d |
HumanData.XformData.position |
Point3d |
Selection.AskSelectionRectanglePositionData.position1
Absolute coordinates of the button down position
|
Point3d |
Selection.AskSelectionRectanglePositionData.position2
Absolute coordinates of the button up position
|
Point3d |
Selection.AskSelectionRectanglePositionData.position3
Absolute coordinates of corner of screen rectangle
which is horizontal with button down position
|
Point3d |
Selection.AskSelectionRectanglePositionData.position4
Absolute coordinates of corner of screen rectangle
which is horizontal with button up position
|
Point3d |
HumanPosturePredictionBuilder.ComputeHandCsysData.rightHandPosition
the position of right hand
|
Point3d |
Selection.SelectScreenPositionData.screenPosition
Selected screen position
|
Point3d |
ModelingView.DisplaySectioningData.sectionOrigin
Center of rectangle representing the active plane
|
Point3d |
RegionBoundaryRule.Data.seedPoint
Seed point
|
Point3d |
FaceRegionBoundaryRule.Data.seedPoint
Seed point
|
Point3d |
FaceMergedRibFacesRule.SeedAndPointData.seedpt
Seed pick point point.
|
Point3d |
Section.StartAndDirectionOfLoopData.startpoint
The origin of the vector that defines the direction of
the loop of the section specified by the index.
|
Point3d |
SectionElementData.Data.startPoint
Start point
|
Point3d |
SectionElementData.SectionElementData1.startPoint
Start point
|
Point3d |
Section.StartAndDirectionData.startPoint
The origin of the vector that defines the direction of
the section.
|
Point3d |
Edge.VerticesData.vertex1
First vertex in the edge
|
Point3d |
Edge.VerticesData.vertex2
Second vertex in the edge
|
Modifier and Type | Method and Description |
---|---|
Point3d |
View.absoluteOrigin()
Returns the view origin in absolute space.
|
Point3d |
Conic.centerPoint()
Returns the center.
|
Point3d |
MeasureBodies.centroid()
Returns the centroid point of the measurement
License requirements: None. |
Point3d |
SubdivisionMeshVertex.coordinates()
Returns the position of the vertex.
|
Point3d |
Point.coordinates()
Returns the coordinates of the point
License requirements: None. |
Point3d |
PartImporter.destinationPoint()
Returns the destination point.
|
Point3d |
Line.endPoint()
Returns the end point of the line
License requirements: None. |
Point3d[] |
Spline.get3DPoles()
Returns poles in three-dimensional cartesian coordinates of a normalized representation of the spline.
|
Point3d |
ObjectGeneralPropertiesBuilder.getNameLocation()
Gets the name location
License requirements: None. |
Point3d |
FeatureGeneralPropertiesBuilder.getNameLocation()
Gets the name location
License requirements: None. |
Point3d |
PropertyContainer.getPoint(int propertyIndex)
Gets the point value for the given index.
|
Point3d |
PropertyContainer.getPoint(String propertyName)
Gets the point value for the given property name.
|
Point3d[] |
Polyline.getPoints()
Returns the points
License requirements: None. |
Point3d |
SketchPasteBuilder.initialPasteLocation()
Returns the initial paste location, this is mainly used to define default paste location of sketch objects
License requirements: None. |
Point3d |
LinkedMirrorPartBuilder.mirrorPlaneOrigin()
Returns the origin of the mirror plane
License requirements: solid_modeling ("SOLIDS MODELING") . |
Point3d |
MathUtils.multiply(Matrix3x3 matrix,
Point3d originalPoint)
Returns a point which is the product of a 3x3 matrix and a 3D point
License requirements: None. |
Point3d |
DisplayableObject.nameLocation()
Returns the location of the object's name.
|
Point3d |
Xform.origin()
Returns the coordinates of the origin
License requirements: None. |
Point3d |
WCS.origin()
Returns the origin of the WCS
License requirements: None. |
Point3d |
View.origin()
Returns the view origin.
|
Point3d |
Sketch.origin()
Returns the location of the origin of the local coordinate system for the sketch
License requirements: None. |
Point3d |
IPlane.origin()
Returns the origin of the plane
License requirements: None. |
Point3d |
DatumPlane.origin()
Returns the origin of the datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
Point3d |
CoordinateSystem.origin()
Returns the origin of the coordinate system
License requirements: None. |
Point3d |
MeasureRectangularExtreme.point()
Returns the centroid point of the measurement
License requirements: None. |
Point3d |
Expression.pointValue()
Returns the point value of the expression.
|
Point3d |
Line.startPoint()
Returns the start point of the line
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectBodyList.add(Body selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectCoordinateSystemList.add(CoordinateSystem selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectCurveList.add(Curve selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectDatumPlaneList.add(DatumPlane selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectDisplayableObjectList.add(DisplayableObject selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectEdgeList.add(Edge selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectExpressionList.add(Expression selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectFaceList.add(Face selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectIBaseCurveList.add(IBaseCurve selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectIBasePlaneList.add(IBasePlane selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectICurveList.add(ICurve selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectINXObjectList.add(INXObject selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectIParameterizedSurfaceList.add(IParameterizedSurface selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectNXObjectList.add(NXObject selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectPartList.add(Part selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectPlaneList.add(Plane selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectPointList.add(Point selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectSplineList.add(Spline selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectTaggedObjectList.add(TaggedObject selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectObjectList.add(TaggedObject selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
void |
Section.addChainBetweenIntersectionPoints(SelectionIntentRule[] rules,
NXObject startConnector,
Point3d startIntersectionPoint,
NXObject endConnector,
Point3d endIntersectionPoint,
NXObject seed,
Point3d helpPoint,
Section.Mode featureMode,
boolean chainWithinFeature)
Adds a chain between given two intersection points to the section.
|
void |
DataContainer.addPoint(String propertyName,
Point3d pointSc)
Adds the point value in the container.
|
void |
Section.addToSection(SelectionIntentRule[] rules,
NXObject seed,
NXObject startConnector,
NXObject endConnector,
Point3d helpPoint,
Section.Mode featureMode)
Adds selection intent rules to the section.
|
void |
Section.addToSection(SelectionIntentRule[] rules,
NXObject seed,
NXObject startConnector,
NXObject endConnector,
Point3d helpPoint,
Section.Mode featureMode,
boolean chainWithinFeature)
Adds selection intent rules to the section with the option of restricting
chaining and limit discovery to a single feature.
|
void |
Section.alignDirectionOfLoop(Point3d point,
Vector3d direction)
Set the direction of a single loop of the section along the given vector.
|
void |
SketchOffsetBuilder.breakChain(NXObject object1,
NXObject object2,
Point3d helpPt)
This function breaks the base chain and all the associated offsets at a given location
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
void |
View.concatenate(double scale,
Point3d centerOfRotation,
Vector3d rotationAxis,
double angle)
Concatenates the given scale and rotation with the previous viewing
transformation of the specified view.
|
void |
View.concatenate(Point3d translation)
Concatenates the given translation with the previous viewing transformation
of the specified view.
|
void |
View.concatenate(Point3d translation,
double scale)
Concatenates the given translation and scale with the previous viewing
transformation of the specified view.
|
void |
View.concatenate(Point3d translation,
double scale,
Point3d centerOfRotation,
Vector3d rotationAxis,
double angle)
Concatenates the given translation, scale and rotation with the previous
viewing transformation of the specified view.
|
void |
View.concatenate(Point3d translation,
Point3d centerOfRotation,
Vector3d rotationAxis,
double angle)
Concatenates the given translation and rotation with the previous viewing
transformation of the specified view.
|
void |
View.concatenate(Point3d centerOfRotation,
Vector3d rotationAxis,
double angle)
Concatenates the given rotation with the previous viewing transformation
of the specified view.
|
Arc |
CurveCollection.createArc(Point3d center,
NXMatrix matrix,
double radius,
double startAngle,
double endAngle)
Creates an
Arc . |
Arc |
CurveCollection.createArc(Point3d startPoint,
Point3d pointOn,
Point3d endPoint,
boolean alternateSolution)
Creates an
Arc that passes through the three specified points. |
Arc |
CurveCollection.createArc(Point3d center,
Vector3d xDirection,
Vector3d yDirection,
double radius,
double startAngle,
double endAngle)
Creates an
Arc . |
Axis |
AxisCollection.createAxis(Point3d point,
Vector3d direction,
SmartObject.UpdateOption update)
Create a non-associative axis
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT") . |
void |
HumanPosturePredictionBuilder.createCarCsys(Point3d carCsysOrigin,
Matrix3x3 carCsysMatrix)
Create the Car Coordinate System, only one Car Coordinate System is allowed in a part or an assembly
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
CartesianCoordinateSystem |
CoordinateSystemCollection.createCoordinateSystem(Point3d origin,
Matrix3x3 orientation,
boolean isTemporary)
Creates a new cartesian coordinate system
License requirements: None. |
CartesianCoordinateSystem |
CoordinateSystemCollection.createCoordinateSystem(Point3d origin,
NXMatrix orientation,
boolean isTemporary)
Creates a new cartesian coordinate system
License requirements: None. |
CartesianCoordinateSystem |
CoordinateSystemCollection.createCoordinateSystem(Point3d origin,
Vector3d xDirection,
Vector3d yDirection)
Creates a new cartesian coordinate system
License requirements: None. |
CylindricalCoordinateSystem |
CoordinateSystemCollection.createCylindricalCoordinateSystem(Point3d origin,
NXMatrix orientation,
boolean isTemporary)
Creates a new cylindrical coordinate system
License requirements: None. |
CylindricalCoordinateSystem |
CoordinateSystemCollection.createCylindricalCoordinateSystem(Point3d origin,
Vector3d xDirection,
Vector3d yDirection)
Creates a new cylindrical coordinate system
License requirements: None. |
SketchDimensionalConstraint |
Sketch.createDiameterDimension(Sketch.DimensionGeometry dimObject1,
Point3d dimOrigin,
Expression expression)
Creates a diameter dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT") . |
SketchDimensionalConstraint |
Sketch.createDiameterDimension(Sketch.DimensionGeometry dimObject1,
Point3d dimOrigin,
Expression expression,
Sketch.DimensionOption refDim)
Creates a diameter dimension constraint.
|
SketchDimensionalConstraint |
Sketch.createDimension(Sketch.ConstraintType dimType,
Sketch.DimensionGeometry dimObject1,
Sketch.DimensionGeometry dimObject2,
Point3d dimOrigin,
Expression expression)
Creates a dimension between two geometric objects.
|
SketchDimensionalConstraint |
Sketch.createDimension(Sketch.ConstraintType dimType,
Sketch.DimensionGeometry dimObject1,
Sketch.DimensionGeometry dimObject2,
Point3d dimOrigin,
Expression expression,
Sketch.DimensionOption refDim)
Creates a dimension between two geometric objects.
|
Direction |
DirectionCollection.createDirection(Point3d origin,
Vector3d vector,
SmartObject.UpdateOption update)
Creates a
nxopen.Direction without parameters. |
Ellipse |
CurveCollection.createEllipse(Point3d center,
double majorRadius,
double minorRadius,
double startAngle,
double endAngle,
double rotationAngle,
NXMatrix matrix)
Creates an
Ellipse . |
Ellipse |
CurveCollection.createEllipse(Point3d center,
Vector3d xDirection,
Vector3d yDirection,
double majorRadius,
double minorRadius,
double startAngle,
double endAngle)
Creates an
Ellipse . |
DatumAxis |
DatumCollection.createFixedDatumAxis(Point3d start,
Point3d end)
Creates a fixed datum axis
Note: start and end only specify the
origin and start direction of the datum axis.
|
DatumPlane |
DatumCollection.createFixedDatumPlane(Point3d origin,
Matrix3x3 orientation)
Creates a fixed datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
Hyperbola |
CurveCollection.createHyperbola(Point3d center,
double semiTransverseLength,
double semiConjugateLength,
double minimumDY,
double maximumDY,
double rotationAngle,
NXMatrix matrix)
Creates a
Hyperbola . |
Hyperbola |
CurveCollection.createHyperbola(Point3d center,
Vector3d xDirection,
Vector3d yDirection,
double semiTransverseLength,
double semiConjugateLength,
double minimumDY,
double maximumDY)
Creates a
Hyperbola . |
InfiniteLine |
CurveCollection.createInfiniteLine(Point3d startPoint,
Point3d endPoint)
Creates a
InfiniteLine that passes through the two specified points. |
Line |
CurveCollection.createLine(Point3d startPoint,
Point3d endPoint)
Creates a
Line . |
Offset |
OffsetCollection.createOffset(Point3d origin,
Vector3d vector,
SmartObject.UpdateOption updateOption)
Create an
Offset without parameters. |
Parabola |
CurveCollection.createParabola(Point3d center,
double focalLength,
double minimumDY,
double maximumDY,
double rotationAngle,
NXMatrix matrix)
Creates a
Parabola . |
Parabola |
CurveCollection.createParabola(Point3d center,
Vector3d xDirection,
Vector3d yDirection,
double focalLength,
double minimumDY,
double maximumDY)
Creates a
Parabola . |
SketchDimensionalConstraint |
Sketch.createPerimeterDimension(Curve[] curves,
Point3d dimOrigin,
Expression expression)
Creates a perimeter dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT") . |
Plane |
PlaneCollection.createPlane(PlaneTypes.MethodType method,
PlaneTypes.AlternateType alternate,
Point3d origin,
Vector3d normal,
String expression,
boolean flip,
boolean percent,
NXObject[] geometry)
Creates an
Plane using a datum plane feature. |
Plane |
PlaneCollection.createPlane(Point3d origin,
Vector3d normal,
SmartObject.UpdateOption updateOption)
Creates an
Plane without parameters. |
Point |
PointCollection.createPoint(IBaseCurve curve1,
IBaseCurve curve2,
Point3d startPoint,
View view,
SmartObject.UpdateOption updateOption)
Creates a
Point at the apparent intersection of two Edges or Curves in a view. |
Point |
PointCollection.createPoint(Point3d coordinates)
Creates a
Point without parameters. |
Point |
PointCollection.createPoint(View view,
IBaseCurve edgeCurve1,
IBaseCurve edgeCurve2,
Point3d helpPt,
SmartObject.UpdateOption updateOption)
|
SketchDimensionalConstraint |
Sketch.createRadialDimension(Sketch.DimensionGeometry dimObject1,
Point3d dimOrigin,
Expression expression)
Creates a radial dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT") . |
SketchDimensionalConstraint |
Sketch.createRadialDimension(Sketch.DimensionGeometry dimObject1,
Point3d dimOrigin,
Expression expression,
Sketch.DimensionOption refDim)
Creates a radial dimension constraint.
|
FaceMergedRibFacesRule |
ScRuleFactory.createRuleFaceMergedRib(Face seed,
boolean includeBoundaryBlends,
Point3d seedPoint)
Creates selection intent rule:
FaceMergedRibFacesRule
License requirements: gateway ("UG GATEWAY") Created in NX8.0.0 |
FaceRegionBoundaryRule |
ScRuleFactory.createRuleFaceRegionBoundary(Face seedObj,
ICurve[] curves,
Point3d seedPoint,
double distanceTolerance)
Creates selection intent rule:
FaceRegionBoundaryRule
License requirements: gateway ("UG GATEWAY") Created in NX7.0.0 |
FollowFilletRule |
ScRuleFactory.createRuleFollowFillet(nxopen.features.Feature[] features,
Body[] bodies,
ICurve[] basicCurves,
ICurve seedWireframe,
ICurve endWireframe,
boolean isFromSeedStart,
Point3d seedPoint,
double gapTolerance,
double angleTolerance,
FollowFilletRuleType method)
Creates selection intent rule:
FollowFilletRule
License requirements: gateway ("UG GATEWAY") Created in NX4.0.0 |
FollowFilletRule |
ScRuleFactory.createRuleFollowFillet(nxopen.features.Feature[] features,
Body[] bodies,
ICurve[] basicCurves,
ICurve seedWireframe,
Point3d seedPoint,
double gapTolerance,
double angleTolerance,
FollowFilletRuleType method)
Creates selection intent rule:
FollowFilletRule with stop at intersection option ON
License requirements: gateway ("UG GATEWAY") Created in NX7.5.0 |
RegionBoundaryRule |
ScRuleFactory.createRuleRegionBoundary(DisplayableObject seedObj,
ICurve[] curves,
Point3d seedPoint,
double distanceTolerance)
Creates selection intent rule:
RegionBoundaryRule
License requirements: gateway ("UG GATEWAY") Created in NX6.0.0 |
SphericalCoordinateSystem |
CoordinateSystemCollection.createSphericalCoordinateSystem(Point3d origin,
NXMatrix orientation,
boolean isTemporary)
Creates a new spherical coordinate system
License requirements: None. |
SphericalCoordinateSystem |
CoordinateSystemCollection.createSphericalCoordinateSystem(Point3d origin,
Vector3d xDirection,
Vector3d yDirection)
Creates a new spherical coordinate system
License requirements: None. |
Xform |
XformCollection.createXform(Point3d origin,
Matrix3x3 orientation,
SmartObject.UpdateOption update,
double scale)
Creates an Xform
License requirements: None. |
Xform |
XformCollection.createXform(Point3d origin,
Vector3d xDirection,
Vector3d yDirection,
SmartObject.UpdateOption updateOption,
double scale)
Creates a Xform without parameters.
|
void |
Section.deselectPortion(Point3d seedPoint,
NXObject startLimit,
NXObject endLimit,
Section.DeselectOption deselectionType)
Deselects Portion of the section depending on the option provided.
|
void |
SketchAssociativeTrimBuilder.deselectRegion(Point3d helpPoint)
The region corresponding to help point will be delsected from being kept/discarded depending
on trim type
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
Measurement.displayAngle(NXObject object1,
Point3d position1,
NXObject object2,
Point3d position2)
Calculates and displays 'Angle' between objects.
|
Measurement.DisplayMinimumDistanceData |
Measurement.displayMinimumDistance(NXObject object1,
NXObject object2,
Point3d startPointForObject2)
Calculates and displays 'Minimum Distance' between objects.
|
Measurement.DisplayMinimumDistanceData |
Measurement.displayMinimumDistance(NXObject object1,
Point3d startPointForObject1,
NXObject object2)
Calculates and displays 'Minimum Distance' between objects.
|
Measurement.DisplayMinimumDistanceData |
Measurement.displayMinimumDistance(NXObject object1,
Point3d startPointForObject1,
NXObject object2,
Point3d startPointForObject2)
Calculates and displays 'Minimum Distance' between objects.
|
void |
Information.displayPointDetails(Point3d absolutePointCoordinates)
Displays the absolute and work coordinates of a point
in the
ListingWindow device. |
void |
MeasureManager.editDistance(Measure feature,
DisplayableObject object1,
Point3d startPointForObject1,
DisplayableObject object2,
Point3d startPointForObject2)
Edit a local minimum distance measure between two objects with two start points.
|
void |
MeasureManager.editDistance(String name,
DisplayableObject object1,
Point3d startPointForObject1,
DisplayableObject object2,
Point3d startPointForObject2)
Edit an embedded local minimum distance measure between two objects with two start points.
|
Sketch.FilletData |
Sketch.fillet(Curve curve1,
Curve curve2,
Curve curve3,
Point3d helpPoint1,
Point3d helpPoint2,
Point3d helpPoint3,
double radius,
Sketch.TrimInputOption doTrim,
Sketch.DeleteThirdCurveOption doDelete,
Sketch.CreateDimensionOption createRadiusDim,
Sketch.AlternateSolutionOption alternateSolution)
Fillets curves and creates appropriate constraints.
|
Sketch.FilletData |
Sketch.fillet(Curve curve1,
Curve curve2,
Curve curve3,
Point3d helpPoint1,
Point3d helpPoint2,
Point3d helpPoint3,
Point3d pointOnArc,
double radius,
Sketch.TrimInputOption doTrim,
Sketch.DeleteThirdCurveOption doDelete,
Sketch.CreateDimensionOption createRadiusDim,
Sketch.AlternateSolutionOption alternateSolution)
Fillets curves and creates appropriate constraints.
|
Sketch.FilletData |
Sketch.fillet(Curve curve1,
Curve curve2,
Point3d helpPoint1,
Point3d helpPoint2,
double radius,
Sketch.TrimInputOption doTrim,
Sketch.CreateDimensionOption createRadiusDim,
Sketch.AlternateSolutionOption alternateSolution)
Fillets curves and creates appropriate constraints.
|
Sketch.FilletData |
Sketch.fillet(Curve curve1,
Curve curve2,
Point3d helpPoint1,
Point3d helpPoint2,
Point3d pointOnArc,
double radius,
Sketch.TrimInputOption doTrim,
Sketch.CreateDimensionOption createRadiusDim,
Sketch.AlternateSolutionOption alternateSolution)
Fillets curves and creates appropriate constraints.
|
double |
Measurement.getAngle(NXObject object1,
Point3d position1,
NXObject object2,
Point3d position2)
Calculates and returns 'True Angle' between objects.
|
int |
Section.getLoopIndex(Point3d pointSpecifyingLoop,
double tolerance)
Returns the index of the loop on which the given point lies.
|
Measurement.MinimumDistanceData |
Measurement.getMinimumDistance(NXObject object1,
NXObject object2,
Point3d startPointForObject2)
Calculates and returns 'Minimum Distance " between objects.
|
Measurement.MinimumDistanceData |
Measurement.getMinimumDistance(NXObject object1,
Point3d startPointForObject1,
NXObject object2)
Calculates and returns 'Minimum Distance " between objects.
|
Measurement.MinimumDistanceData |
Measurement.getMinimumDistance(NXObject object1,
Point3d startPointForObject1,
NXObject object2,
Point3d startPointForObject2)
Calculates and returns 'Minimum Distance " between objects.
|
void |
SketchOffsetBuilder.mergeChains(NXObject object1,
NXObject object2,
Point3d helpPt)
This function merges the two chains.
|
Point3d |
MathUtils.multiply(Matrix3x3 matrix,
Point3d originalPoint)
Returns a point which is the product of a 3x3 matrix and a 3D point
License requirements: None. |
MeasureDistance |
MeasureManager.newDistance(Unit units,
boolean createGeometry,
DisplayableObject object1,
Point3d startPointForObject1,
DisplayableObject object2,
Point3d startPointForObject2)
Create a local minimum distance measure between two objects with start points
and the option to create smart geoemtry
Features.SewBuilder.Types of allowed input objects include - Point, Curve, Edge, Face, Body, Datum Plane, Datum Axis, Facet Body. |
MeasureDistance |
MeasureManager.newDistance(Unit units,
DisplayableObject object1,
Point3d startPointForObject1,
DisplayableObject object2,
Point3d startPointForObject2)
Create a local minimum distance measure between two objects with start points.
|
void |
Sketch.reattach(ISurface attachmentPlane,
IReferenceAxis referenceAxis,
Vector3d referenceDirection,
AxisOrientation referenceAxisOrientation,
Sense referenceAxisSense,
PlaneNormalOrientation normalOrientation,
Point3d localCoordinateSystemOrigin)
Reattaches a sketch.
|
boolean |
SelectBodyList.remove(InferSnapType.SnapType snapType,
Body selection1,
View view1,
Point3d point1,
Body selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectCoordinateSystemList.remove(InferSnapType.SnapType snapType,
CoordinateSystem selection1,
View view1,
Point3d point1,
CoordinateSystem selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectCurveList.remove(InferSnapType.SnapType snapType,
Curve selection1,
View view1,
Point3d point1,
Curve selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectDatumPlaneList.remove(InferSnapType.SnapType snapType,
DatumPlane selection1,
View view1,
Point3d point1,
DatumPlane selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectDisplayableObjectList.remove(InferSnapType.SnapType snapType,
DisplayableObject selection1,
View view1,
Point3d point1,
DisplayableObject selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectEdgeList.remove(InferSnapType.SnapType snapType,
Edge selection1,
View view1,
Point3d point1,
Edge selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectExpressionList.remove(InferSnapType.SnapType snapType,
Expression selection1,
View view1,
Point3d point1,
Expression selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectFaceList.remove(InferSnapType.SnapType snapType,
Face selection1,
View view1,
Point3d point1,
Face selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectIBaseCurveList.remove(InferSnapType.SnapType snapType,
IBaseCurve selection1,
View view1,
Point3d point1,
IBaseCurve selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectIBasePlaneList.remove(InferSnapType.SnapType snapType,
IBasePlane selection1,
View view1,
Point3d point1,
IBasePlane selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectICurveList.remove(InferSnapType.SnapType snapType,
ICurve selection1,
View view1,
Point3d point1,
ICurve selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectINXObjectList.remove(InferSnapType.SnapType snapType,
INXObject selection1,
View view1,
Point3d point1,
INXObject selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectIParameterizedSurfaceList.remove(InferSnapType.SnapType snapType,
IParameterizedSurface selection1,
View view1,
Point3d point1,
IParameterizedSurface selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectNXObjectList.remove(InferSnapType.SnapType snapType,
NXObject selection1,
View view1,
Point3d point1,
NXObject selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectPartList.remove(InferSnapType.SnapType snapType,
Part selection1,
View view1,
Point3d point1,
Part selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectPlaneList.remove(InferSnapType.SnapType snapType,
Plane selection1,
View view1,
Point3d point1,
Plane selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectPointList.remove(InferSnapType.SnapType snapType,
Point selection1,
View view1,
Point3d point1,
Point selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectSplineList.remove(InferSnapType.SnapType snapType,
Spline selection1,
View view1,
Point3d point1,
Spline selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectTaggedObjectList.remove(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectObjectList.remove(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
Section.removeMultipleElements(ICurve[] wfs,
NXObject[] startConnectors,
NXObject[] endConnectors,
boolean[] isCombinationsResultIntoOnlyOneCurvePerCombination,
Point3d[] pointsOnCurvesToBeRemoved,
Point[] points,
Section.Mode featureMode)
Removes multiple section elements.
|
void |
Section.removeUnderlyingChain(Point3d pointSpecifyingChain,
double tolerance,
Section.Mode featureMode)
Removes all the selection intent rules related to the chain on which the given point lies.
|
void |
Section.removeUnderlyingCurve(Point3d pointSpecifyingCurve,
double tolerance,
Section.Mode featureMode)
Removes the single curve which is within tolerance to the given point, from the section.
|
void |
View.rotate(Point3d origin,
Vector3d vector,
double angle)
Rotates the specified view using the specified origin of rotation
and about the specified axis.
|
void |
SketchAssociativeTrimBuilder.selectRegion(Point3d helpPoint)
The function sets help point for region select.
|
void |
SubdivisionMeshVertex.setCoordinates(Point3d position)
Sets the position of the vertex.
|
void |
Point.setCoordinates(Point3d coordinates)
Sets the coordinates of the point
License requirements: None. |
void |
DatumPlane.setCornerPoints(Point3d point1,
Point3d point2,
Point3d point3,
Point3d point4)
Sets the corner points of the datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
PartImporter.setDestinationPoint(Point3d destinationPoint)
Sets the destination point.
|
void |
ModelingView.setDisplaySectioning(Matrix3x3 sectionMatrix,
Point3d sectionOrigin,
double[] planeDist,
ModelingView.OtherSectionAttrT otherAttrs)
Deprecated.
Deprecated in NX5.0.0. Use
ModelingView.setActiveDynamicSection(nxopen.display.DynamicSection) instead.
|
void |
Line.setEndPoint(Point3d endPoint)
Sets the end point of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
Line.setEndpoints(Point3d startPoint,
Point3d endPoint)
Sets the start and end points of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
HumanPosturePredictionBuilder.setHandFootCsys(HumanData.HandFootType handFoot,
HumanData.SideType side,
Point3d position,
Matrix3x3 orientation)
Set the Csys of hand foot, the hand foot csys should be on solid, curve or not conflict with
SAE data related to its steering wheel and pedal type.
|
void |
ISketchHelpedConstraint.setHelpPoints(boolean hasHelp1,
boolean hasHelp2,
Point3d helpPoint1,
Point3d helpPoint2)
Sets the help points for the constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
SketchPasteBuilder.setInitialPasteLocation(Point3d dropLocation)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
LinkedMirrorPartBuilder.setMirrorPlaneOrigin(Point3d origin)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
ObjectGeneralPropertiesBuilder.setNameLocation(Point3d nameLocation)
Sets the name location.
|
void |
FeatureGeneralPropertiesBuilder.setNameLocation(Point3d nameLocation)
Sets the name location.
|
void |
DisplayableObject.setNameLocation(Point3d location)
Sets the location of the object's name.
|
void |
Conic.setOrientation(Point3d center,
Vector3d xDirection,
Vector3d yDirection)
Sets the center of the conic.
|
void |
Xform.setOrigin(Point3d origin)
Sets the coordinates of the origin
License requirements: None. |
void |
WCS.setOrigin(Point3d origin)
License requirements: None. |
void |
View.setOrigin(Point3d origin)
Moves the given position to the center of the view.
|
void |
IPlane.setOrigin(Point3d origin)
License requirements: None. |
void |
CoordinateSystem.setOrigin(Point3d origin)
License requirements: None. |
void |
WCS.setOriginAndMatrix(Point3d origin,
Matrix3x3 matrix)
Sets the origin and orientation matrix of the WCS
License requirements: None. |
void |
Arc.setParameters(double radius,
Point3d center,
double startAngle,
double endAngle)
Sets the center, radius, and start and end angles of the arc.
|
void |
Arc.setParameters(double radius,
Point3d center,
double startAngle,
double endAngle,
NXMatrix matrix)
Sets the center, radius, start and end angles, and orientation
matrix of the arc.
|
void |
PropertyContainer.setPoint(String propertyName,
Point3d pointSc)
Sets the point value for the given property name.
|
void |
View.setRotationTranslationScale(Matrix3x3 rotMatrix,
Point3d translation,
double scale)
Sets the rotation, translation and scale of the specified view.
|
void |
Section.setStartAndDirection(ICurve startElement,
Point3d startPoint,
Vector3d direction)
Sets the start element and the direction of the section.
|
void |
Section.setStartCurveOfClosedLoop(int index,
Point3d pointOnStartCurve)
Set the curve on which the specified point lies as the start curve
of a specified single loop of the section.
|
void |
Line.setStartPoint(Point3d startPoint)
Sets the start point of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
SelectBody.setValue(Body selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectCartesianCoordinateSystem.setValue(CartesianCoordinateSystem selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectCoordinateSystem.setValue(CoordinateSystem selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectCurve.setValue(Curve selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectDatumPlane.setValue(DatumPlane selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectDisplayableObject.setValue(DisplayableObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectEdge.setValue(Edge selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectFace.setValue(Face selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectIBaseCurve.setValue(IBaseCurve selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectICurve.setValue(ICurve selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectIParameterizedSurface.setValue(IParameterizedSurface selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectISurface.setValue(ISurface selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectLine.setValue(Line selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectNXObject.setValue(NXObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectPart.setValue(Part selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectPoint.setValue(Point selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectSketch.setValue(Sketch selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectSmartObject.setValue(SmartObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectSpline.setValue(Spline selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectTaggedObject.setValue(TaggedObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectObject.setValue(TaggedObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectView.setValue(View selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectBodyList.setValueWithSnap(InferSnapType.SnapType snapType,
Body selection1,
View view1,
Point3d point1,
Body selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectBody.setValueWithSnap(InferSnapType.SnapType snapType,
Body selection1,
View view1,
Point3d point1,
Body selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectCartesianCoordinateSystem.setValueWithSnap(InferSnapType.SnapType snapType,
CartesianCoordinateSystem selection1,
View view1,
Point3d point1,
CartesianCoordinateSystem selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectCoordinateSystemList.setValueWithSnap(InferSnapType.SnapType snapType,
CoordinateSystem selection1,
View view1,
Point3d point1,
CoordinateSystem selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectCoordinateSystem.setValueWithSnap(InferSnapType.SnapType snapType,
CoordinateSystem selection1,
View view1,
Point3d point1,
CoordinateSystem selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectCurveList.setValueWithSnap(InferSnapType.SnapType snapType,
Curve selection1,
View view1,
Point3d point1,
Curve selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectCurve.setValueWithSnap(InferSnapType.SnapType snapType,
Curve selection1,
View view1,
Point3d point1,
Curve selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectDatumPlaneList.setValueWithSnap(InferSnapType.SnapType snapType,
DatumPlane selection1,
View view1,
Point3d point1,
DatumPlane selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectDatumPlane.setValueWithSnap(InferSnapType.SnapType snapType,
DatumPlane selection1,
View view1,
Point3d point1,
DatumPlane selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectDisplayableObjectList.setValueWithSnap(InferSnapType.SnapType snapType,
DisplayableObject selection1,
View view1,
Point3d point1,
DisplayableObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectDisplayableObject.setValueWithSnap(InferSnapType.SnapType snapType,
DisplayableObject selection1,
View view1,
Point3d point1,
DisplayableObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectEdgeList.setValueWithSnap(InferSnapType.SnapType snapType,
Edge selection1,
View view1,
Point3d point1,
Edge selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectEdge.setValueWithSnap(InferSnapType.SnapType snapType,
Edge selection1,
View view1,
Point3d point1,
Edge selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectExpressionList.setValueWithSnap(InferSnapType.SnapType snapType,
Expression selection1,
View view1,
Point3d point1,
Expression selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectFaceList.setValueWithSnap(InferSnapType.SnapType snapType,
Face selection1,
View view1,
Point3d point1,
Face selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectFace.setValueWithSnap(InferSnapType.SnapType snapType,
Face selection1,
View view1,
Point3d point1,
Face selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectIBaseCurveList.setValueWithSnap(InferSnapType.SnapType snapType,
IBaseCurve selection1,
View view1,
Point3d point1,
IBaseCurve selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectIBaseCurve.setValueWithSnap(InferSnapType.SnapType snapType,
IBaseCurve selection1,
View view1,
Point3d point1,
IBaseCurve selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectIBasePlaneList.setValueWithSnap(InferSnapType.SnapType snapType,
IBasePlane selection1,
View view1,
Point3d point1,
IBasePlane selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectICurveList.setValueWithSnap(InferSnapType.SnapType snapType,
ICurve selection1,
View view1,
Point3d point1,
ICurve selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectICurve.setValueWithSnap(InferSnapType.SnapType snapType,
ICurve selection1,
View view1,
Point3d point1,
ICurve selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectINXObjectList.setValueWithSnap(InferSnapType.SnapType snapType,
INXObject selection1,
View view1,
Point3d point1,
INXObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectIParameterizedSurfaceList.setValueWithSnap(InferSnapType.SnapType snapType,
IParameterizedSurface selection1,
View view1,
Point3d point1,
IParameterizedSurface selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectIParameterizedSurface.setValueWithSnap(InferSnapType.SnapType snapType,
IParameterizedSurface selection1,
View view1,
Point3d point1,
IParameterizedSurface selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectISurface.setValueWithSnap(InferSnapType.SnapType snapType,
ISurface selection1,
View view1,
Point3d point1,
ISurface selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectLine.setValueWithSnap(InferSnapType.SnapType snapType,
Line selection1,
View view1,
Point3d point1,
Line selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectNXObjectList.setValueWithSnap(InferSnapType.SnapType snapType,
NXObject selection1,
View view1,
Point3d point1,
NXObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectNXObject.setValueWithSnap(InferSnapType.SnapType snapType,
NXObject selection1,
View view1,
Point3d point1,
NXObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectPartList.setValueWithSnap(InferSnapType.SnapType snapType,
Part selection1,
View view1,
Point3d point1,
Part selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectPart.setValueWithSnap(InferSnapType.SnapType snapType,
Part selection1,
View view1,
Point3d point1,
Part selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectPlaneList.setValueWithSnap(InferSnapType.SnapType snapType,
Plane selection1,
View view1,
Point3d point1,
Plane selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectPointList.setValueWithSnap(InferSnapType.SnapType snapType,
Point selection1,
View view1,
Point3d point1,
Point selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectPoint.setValueWithSnap(InferSnapType.SnapType snapType,
Point selection1,
View view1,
Point3d point1,
Point selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectSketch.setValueWithSnap(InferSnapType.SnapType snapType,
Sketch selection1,
View view1,
Point3d point1,
Sketch selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectSmartObject.setValueWithSnap(InferSnapType.SnapType snapType,
SmartObject selection1,
View view1,
Point3d point1,
SmartObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectSplineList.setValueWithSnap(InferSnapType.SnapType snapType,
Spline selection1,
View view1,
Point3d point1,
Spline selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectSpline.setValueWithSnap(InferSnapType.SnapType snapType,
Spline selection1,
View view1,
Point3d point1,
Spline selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectTaggedObjectList.setValueWithSnap(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectTaggedObject.setValueWithSnap(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectObjectList.setValueWithSnap(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectObject.setValueWithSnap(InferSnapType.SnapType snapType,
TaggedObject selection1,
View view1,
Point3d point1,
TaggedObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectView.setValueWithSnap(InferSnapType.SnapType snapType,
View selection1,
View view1,
Point3d point1,
View selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
View.zoomAboutPoint(double relativeScale,
Point3d scaleAboutPoint,
Point3d viewCenter)
Scales the specified view such that the given scale_about_point does not move.
|
void |
View.zoomByRectangle(Point3d corner1,
Point3d corner2)
Scales the specified view such that the specified rectangle is as large
as possible while being fully contained within the viewport.
|
Constructor and Description |
---|
ConstraintGeometryHelp(Sketch.ConstraintGeometryHelpType typeInitial,
Point3d pointInitial,
double parameterInitial)
Constructor for the ConstraintGeometryHelp object.
|
DimensionGeometry(NXObject geometryInitial,
Sketch.AssocType assocTypeInitial,
int assocValueInitial,
Point3d helpPointInitial,
NXObject viewInitial)
Constructor for the DimensionGeometry object.
|
Modifier and Type | Field and Description |
---|---|
Point3d[] |
ForeshorteningSymbolBuilder.SymbolsData.locations |
Point3d |
AnnotationPlacement.OriginData.origin
The origin stored on the annotation
|
Point3d |
SelectDimension.ValueData.point
selected object point
|
Point3d |
SelectDimension.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectDimension.ValueWithSnapData.point2
second selected object point
|
Modifier and Type | Method and Description |
---|---|
Point3d |
ArcComponent.centerPoint()
Returns the arc center point in absolute coordinates.
|
Point3d |
LeaderData.datumOnDotTerminatedEndPoint()
Returns the datum end point for the leader segment of the datum portion of a datum on dot terminated leadet
License requirements: None. |
Point3d |
LeaderData.datumOnDotTerminatedStartPoint()
Returns the datum start point for the leader segment of the datum portion of a datum on dot terminated leader
License requirements: None. |
Point3d |
LineComponent.endPoint()
Returns the line end point in absolute coordinates.
|
Point3d |
ILineTarget.endPointCoordinates()
Returns the target end point coordinates
License requirements: None. |
Point3d |
Associativity.firstDefinitionPoint()
Returns the first definition point.
|
Point3d |
BaseOrdinateDimensionBuilder.horizontalInferredMarginLocation()
Returns the horizontal inferred margin location
License requirements: None. |
Point3d |
OffsetCenterPointBuilder.offsetPosition()
Returns the offset position, valid for position offset methods
License requirements: None. |
Point3d |
TextComponent.origin()
Returns the text origin in absolute coordinates.
|
Point3d |
DefineTitleBlockBuilder.origin()
Returns the origin of the title block.
|
Point3d |
ArrowComponent.origin()
Returns the arrow origin in absolute coordinates.
|
Point3d |
OriginBuilder.originPoint()
Returns the origin point
License requirements: None. |
Point3d |
Associativity.pickPoint()
Returns the pick point
License requirements: None. |
Point3d |
IPointTarget.pointCoordinates()
Returns the target point coordinates
License requirements: None. |
Point3d |
Associativity.secondDefinitionPoint()
Returns the second definition point.
|
Point3d |
LineComponent.startPoint()
Returns the line start point in absolute coordinates.
|
Point3d |
ILineTarget.startPointCoordinates()
Returns the target start point coordinates
License requirements: None. |
Point3d |
BaseOrdinateDimensionBuilder.verticalInferredMarginLocation()
Returns the vertical inferred margin location
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectAnnotationList.add(Annotation selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectBaseCustomSymbolList.add(BaseCustomSymbol selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectOrdinateDimensionList.add(OrdinateDimension selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectTableSectionList.add(TableSection selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
Dimension |
DimensionSet.addDimension(DimensionData dimensionData,
Point3d origin,
boolean autoAdjustNarrowDim)
Adds a dimension to the set
License requirements: drafting ("DRAFTING") . |
Dimension |
DimensionSet.addPmiDimension(DimensionData dimensionData,
PmiData pmiData,
Point3d origin,
boolean autoAdjustNarrowDim)
Adds a PMI dimension to the PMI dimension set.
|
Dimension |
DimensionSet.addPmiDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
boolean autoAdjustNarrowDim)
Adds a PMI dimension to the PMI dimension set.
|
void |
ForeshorteningSymbolBuilder.addSymbol(Point3d locations)
Add the foreshortening symbol
License requirements: None. |
ArbitraryTarget |
DatumTargetCollection.createArbitraryTarget(ArbitraryTargetData targetData,
PmiData data,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates a PMI arbitrary target
License requirements: geometric_tol ("GDT") . |
DraftingArbitraryTarget |
DatumTargetCollection.createArbitraryTarget(ArbitraryTargetData targetData,
Point3d origin,
LeaderBundle leader)
Creates a drafting arbitrary target
License requirements: drafting ("DRAFTING") . |
ArcLengthDimension |
DimensionCollection.createArcLengthDimension(DimensionData dimensionData,
Point3d origin)
Creates an arc length dimension
License requirements: drafting ("DRAFTING") . |
ChamferDimension |
DimensionCollection.createChamferDimension(DimensionData dimensionData,
Point3d origin)
Creates a chamfer dimension
License requirements: drafting ("DRAFTING") . |
CircularTarget |
DatumTargetCollection.createCircularTarget(CircularTargetData targetData,
PmiData data,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates a PMI circular target
License requirements: geometric_tol ("GDT") . |
ConcentricCircleDimension |
DimensionCollection.createConcentricCircleDimension(DimensionData dimensionData,
Point3d origin)
Creates a concentric circle dimension
License requirements: drafting ("DRAFTING") . |
CustomSymbol |
CustomSymbolCollection.createCustomSymbol(CustomSymbolData customSymbolData,
Point3d origin,
LeaderBundle leader)
Deprecated.
Deprecated in NX9.0.0. Use
DraftingCustomSymbolBuilder instead.
|
CylindricalDimension |
DimensionCollection.createCylindricalDimension(DimensionData dimensionData,
Point3d origin)
Creates a cylindrical dimension
License requirements: drafting ("DRAFTING") . |
Datum |
GdtDatumCollection.createDatum(DatumData datumData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates a PMI datum
License requirements: geometric_tol ("GDT") . |
DraftingDatum |
GdtDatumCollection.createDatum(DatumData datumData,
Point3d origin,
LeaderBundle leader)
Creates a drafting datum
License requirements: drafting ("DRAFTING") . |
DiameterDimension |
DimensionCollection.createDiameterDimension(DimensionData dimensionData,
Point3d origin)
Creates a diameter dimension
License requirements: drafting ("DRAFTING") . |
Fcf |
FcfCollection.createFcf(FcfData fcfData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates an FCF
License requirements: geometric_tol ("GDT") . |
FoldedRadiusDimension |
DimensionCollection.createFoldedRadiusDimension(DimensionData dimensionData,
Point3d origin)
Creates a folded radius dimension
License requirements: drafting ("DRAFTING") . |
Gdt |
AnnotationManager.createGdt(String[] textLines,
Point3d origin,
LetteringPreferences letteringPreferences,
UserSymbolPreferences userSymbolPreferences,
LineAndArrowPreferences lineArrowPreferences,
boolean alwaysVertical,
LeaderBundle leader)
Creates a GDT symbol
License requirements: drafting ("DRAFTING") . |
HoleDimension |
DimensionCollection.createHoleDimension(DimensionData dimensionData,
Point3d origin)
Creates a hole dimension
License requirements: drafting ("DRAFTING") . |
BaselineDimension |
DimensionSetCollection.createHorizontalBaselineDimension(DimensionData dimensionData,
Point3d origin)
Creates a horizontal baseline dimension.
|
ChainDimension |
DimensionSetCollection.createHorizontalChainDimension(DimensionData dimensionData,
Point3d origin)
Creates a horizontal chain dimension.
|
HorizontalDimension |
DimensionCollection.createHorizontalDimension(DimensionData dimensionData,
Point3d origin)
Creates a horizontal dimension
License requirements: drafting ("DRAFTING") . |
void |
DimensionCollection.createHorizontalOrdinateAutoDimension(DimensionData dimensionData,
Point3d origin,
boolean allowDuplicate,
boolean repositionDim)
Creates a horizontal ordinate automatic dimension
License requirements: drafting ("DRAFTING") . |
HorizontalOrdinateDimension |
DimensionCollection.createHorizontalOrdinateDimension(DimensionData dimensionData,
Point3d origin)
Creates a horizontal ordinate dimension
License requirements: drafting ("DRAFTING") . |
OrdinateMargin |
OrdinateMarginCollection.createInferredMargin(OrdinateOriginDimension ordinateOrigin,
Point3d origin,
int subtype)
Creates an inferred ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") . |
Label |
AnnotationManager.createLabel(String[] textLines,
Point3d origin,
LetteringPreferences letteringPreferences,
UserSymbolPreferences userSymbolPreferences,
LineAndArrowPreferences lineArrowPreferences,
LeaderBundle leader)
Creates a label.
|
LineTarget |
DatumTargetCollection.createLineTarget(DatumTargetData targetData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates a PMI line target
License requirements: geometric_tol ("GDT") . |
DraftingLineTarget |
DatumTargetCollection.createLineTarget(DatumTargetData targetData,
Point3d origin,
LeaderBundle leader)
Creates a drafting line target
License requirements: drafting ("DRAFTING") . |
LineWeld |
WeldCollection.createLineWeld(LineWeldData lineWeldData,
Point3d origin,
LeaderBundle leader)
Creates a line weld.
|
MajorAngularDimension |
DimensionCollection.createMajorAngularDimension(DimensionData dimensionData,
Point3d origin)
Creates a major angular dimension
License requirements: drafting ("DRAFTING") . |
MinorAngularDimension |
DimensionCollection.createMinorAngularDimension(DimensionData dimensionData,
Point3d origin)
Creates a minor angular dimension
License requirements: drafting ("DRAFTING") . |
Note |
AnnotationManager.createNote(String[] textLines,
Point3d origin,
AxisOrientation orientation,
LetteringPreferences letteringPreferences,
UserSymbolPreferences userSymbolPreferences)
Creates a note
License requirements: drafting ("DRAFTING") . |
OrdinateOriginDimension |
DimensionCollection.createOrdinateOriginDimension(DimensionData dimensionData,
Point3d origin)
Creates an ordinate origin dimension
License requirements: drafting ("DRAFTING") . |
ParallelDimension |
DimensionCollection.createParallelDimension(DimensionData dimensionData,
Point3d origin)
Creates a parallel dimension
License requirements: drafting ("DRAFTING") . |
PerpendicularDimension |
DimensionCollection.createPerpendicularDimension(DimensionData dimensionData,
Point3d origin)
Creates a perpendicular dimension
License requirements: drafting ("DRAFTING") . |
PmiArcLengthDimension |
DimensionCollection.createPmiArcLengthDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI arc length dimension
License requirements: geometric_tol ("GDT") . |
PmiChamferDimension |
DimensionCollection.createPmiChamferDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI chamfer dimnension
License requirements: geometric_tol ("GDT") . |
PmiConcentricCircleDimension |
DimensionCollection.createPmiConcentricCircleDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI concentric circle dimension
License requirements: geometric_tol ("GDT") . |
PmiCustomSymbol |
CustomSymbolCollection.createPmiCustomSymbol(CustomSymbolData customSymbolData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Deprecated.
Deprecated in NX9.0.0. Use
PmiCustomSymbolBuilder instead.
|
PmiCylindricalDimension |
DimensionCollection.createPmiCylindricalDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI cylindrical dimension
License requirements: geometric_tol ("GDT") . |
PmiDiameterDimension |
DimensionCollection.createPmiDiameterDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI diameter dimension
License requirements: geometric_tol ("GDT") . |
PmiFoldedRadiusDimension |
DimensionCollection.createPmiFoldedRadiusDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI folded radius dimension
License requirements: geometric_tol ("GDT") . |
PmiHoleDimension |
DimensionCollection.createPmiHoleDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI hole dimension
License requirements: geometric_tol ("GDT") . |
PmiBaselineDimension |
DimensionSetCollection.createPmiHorizontalBaselineDimension(DimensionData dimensionData,
PmiData[] pmidata,
Xform annotationPlane,
Point3d origin)
Creates a PMI horizontal baseline dimension.
|
PmiChainDimension |
DimensionSetCollection.createPmiHorizontalChainDimension(DimensionData dimensionData,
PmiData[] pmidata,
Xform annotationPlane,
Point3d origin)
Creates a PMI horizontal chain dimension.
|
PmiHorizontalDimension |
DimensionCollection.createPmiHorizontalDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI horizontal dimension
License requirements: geometric_tol ("GDT") . |
void |
DimensionCollection.createPmiHorizontalOrdinateAutoDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
boolean allowDuplicate,
boolean repositionDim)
Creates a PMI horizontal ordinate automatic dimension
License requirements: geometric_tol ("GDT") . |
PmiHorizontalOrdinateDimension |
DimensionCollection.createPmiHorizontalOrdinateDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI horizontal ordinate dimension
License requirements: geometric_tol ("GDT") . |
PmiLabel |
LabelCollection.createPmiLabel(LabelData labelData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates a PMI label
License requirements: geometric_tol ("GDT") . |
PmiLineWeld |
WeldCollection.createPmiLineWeld(LineWeldData lineWeldData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates a PMI line weld.
|
PmiMajorAngularDimension |
DimensionCollection.createPmiMajorAngularDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI major angular dimension
License requirements: geometric_tol ("GDT") . |
PmiMinorAngularDimension |
DimensionCollection.createPmiMinorAngularDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI minor angular dimension
License requirements: geometric_tol ("GDT") . |
PmiNote |
NoteCollection.createPmiNote(NoteData noteData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI note
License requirements: geometric_tol ("GDT") . |
PmiOrdinateOriginDimension |
DimensionCollection.createPmiOrdinateOriginDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI ordinate origin dimension
License requirements: geometric_tol ("GDT") . |
PmiParallelDimension |
DimensionCollection.createPmiParallelDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI parallel dimension
License requirements: geometric_tol ("GDT") . |
PmiPerpendicularDimension |
DimensionCollection.createPmiPerpendicularDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI perpendicular dimension
License requirements: geometric_tol ("GDT") . |
PmiRadiusDimension |
DimensionCollection.createPmiRadiusDimension(DimensionData dimensionData,
RadiusDimensionType radiusType,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI radius dimension
License requirements: geometric_tol ("GDT") . |
PmiBaselineDimension |
DimensionSetCollection.createPmiVerticalBaselineDimension(DimensionData dimensionData,
PmiData[] pmidata,
Xform annotationPlane,
Point3d origin)
Creates a PMI vertical baseline dimension.
|
PmiChainDimension |
DimensionSetCollection.createPmiVerticalChainDimension(DimensionData dimensionData,
PmiData[] pmidata,
Xform annotationPlane,
Point3d origin)
Creates a PMI vertical chain dimension.
|
PmiVerticalDimension |
DimensionCollection.createPmiVerticalDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI vertical dimension
License requirements: geometric_tol ("GDT") . |
void |
DimensionCollection.createPmiVerticalOrdinateAutoDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
boolean allowDuplicate,
boolean repositionDim)
Creates a PMI vertical ordinate automatic dimension
License requirements: geometric_tol ("GDT") . |
PmiVerticalOrdinateDimension |
DimensionCollection.createPmiVerticalOrdinateDimension(DimensionData dimensionData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin)
Creates a PMI vertical ordinate dimension
License requirements: geometric_tol ("GDT") . |
PointTarget |
DatumTargetCollection.createPointTarget(DatumTargetData targetData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates a PMI point target
License requirements: geometric_tol ("GDT") . |
DraftingPointTarget |
DatumTargetCollection.createPointTarget(DatumTargetData targetData,
Point3d origin,
LeaderBundle leader)
Creates a drafting point target
License requirements: drafting ("DRAFTING") . |
RadiusDimension |
DimensionCollection.createRadiusDimension(DimensionData dimensionData,
RadiusDimensionType radiusType,
Point3d origin)
Creates a radius dimension
License requirements: drafting ("DRAFTING") . |
RectangularTarget |
DatumTargetCollection.createRectangularTarget(RectangularTargetData targetData,
PmiData pmiData,
Xform annotationPlane,
Point3d origin,
LeaderBundle leader)
Creates a PMI rectangular target
License requirements: geometric_tol ("GDT") . |
BaselineDimension |
DimensionSetCollection.createVerticalBaselineDimension(DimensionData dimensionData,
Point3d origin)
Creates a vertical baseline dimension.
|
ChainDimension |
DimensionSetCollection.createVerticalChainDimension(DimensionData dimensionData,
Point3d origin)
Creates a vertical chain dimension.
|
VerticalDimension |
DimensionCollection.createVerticalDimension(DimensionData dimensionData,
Point3d origin)
Creates a vertical dimension
License requirements: drafting ("DRAFTING") . |
void |
DimensionCollection.createVerticalOrdinateAutoDimension(DimensionData dimensionData,
Point3d origin,
boolean allowDuplicate,
boolean repositionDim)
Creates a vertical ordinate automatic dimension
License requirements: drafting ("DRAFTING") . |
VerticalOrdinateDimension |
DimensionCollection.createVerticalOrdinateDimension(DimensionData dimensionData,
Point3d origin)
Creates a vertical ordinate dimension
License requirements: drafting ("DRAFTING") . |
void |
ForeshorteningSymbolBuilder.modifySymbol(int symbolIndex,
Point3d locations)
Modify the foreshortening symbol
License requirements: None. |
boolean |
SelectAnnotationList.remove(InferSnapType.SnapType snapType,
Annotation selection1,
View view1,
Point3d point1,
Annotation selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectBaseCustomSymbolList.remove(InferSnapType.SnapType snapType,
BaseCustomSymbol selection1,
View view1,
Point3d point1,
BaseCustomSymbol selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectOrdinateDimensionList.remove(InferSnapType.SnapType snapType,
OrdinateDimension selection1,
View view1,
Point3d point1,
OrdinateDimension selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectTableSectionList.remove(InferSnapType.SnapType snapType,
TableSection selection1,
View view1,
Point3d point1,
TableSection selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
HoleCalloutSettingsBuilder.resetFromFeature(nxopen.features.Feature feature,
Component partOccurrence,
View view,
Point3d pickPoint)
Reset the builder data based on a feature if the feature is a hole feature.
|
void |
LeaderData.setDatumOnDotTerminatedEndPoint(Point3d endpoint)
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") . |
void |
LeaderData.setDatumOnDotTerminatedStartPoint(Point3d startpoint)
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") . |
void |
Associativity.setFirstDefinitionPoint(Point3d firstDefinitionPoint)
Sets the first definition point.
|
void |
BaseOrdinateDimensionBuilder.setHorizontalInferredMarginLocation(Point3d location)
License requirements: drafting ("DRAFTING") . |
void |
LeaderBundle.setLeaderData(int n,
LeaderAttachment attachmentType,
NXObject attachmentObject,
View attachmentView,
Point3d endPoint,
double angle,
Point3d[] intermediatePoints)
Sets the leader data for the nth leader
License requirements: None. |
void |
LeaderBundle.setLeaderData(int n,
LeaderAttachment attachmentType,
NXObject attachmentObject,
View attachmentView,
Point3d endPoint,
double angle,
Point3d[] intermediatePoints)
Sets the leader data for the nth leader
License requirements: None. |
void |
OffsetCenterPointBuilder.setOffsetPosition(Point3d point)
License requirements: drafting ("DRAFTING") . |
void |
AnnotationPlacement.setOrigin(Annotation.AssociativeOriginData originData,
Point3d origin)
Sets the origin of the current annotation
License requirements: drafting ("DRAFTING") . |
void |
DefineTitleBlockBuilder.setOrigin(Point3d origin)
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") . |
void |
OriginBuilder.setOriginPoint(Point3d origin)
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") . |
void |
Associativity.setPickPoint(Point3d pickPoint)
Sets the pick point
License requirements: None. |
void |
Associativity.setSecondDefinitionPoint(Point3d secondDefinitionPoint)
Sets the second definition point.
|
void |
SelectDimension.setValue(Dimension selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectAnnotationList.setValueWithSnap(InferSnapType.SnapType snapType,
Annotation selection1,
View view1,
Point3d point1,
Annotation selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectBaseCustomSymbolList.setValueWithSnap(InferSnapType.SnapType snapType,
BaseCustomSymbol selection1,
View view1,
Point3d point1,
BaseCustomSymbol selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectDimension.setValueWithSnap(InferSnapType.SnapType snapType,
Dimension selection1,
View view1,
Point3d point1,
Dimension selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectOrdinateDimensionList.setValueWithSnap(InferSnapType.SnapType snapType,
OrdinateDimension selection1,
View view1,
Point3d point1,
OrdinateDimension selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectTableSectionList.setValueWithSnap(InferSnapType.SnapType snapType,
TableSection selection1,
View view1,
Point3d point1,
TableSection selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
BaseOrdinateDimensionBuilder.setVerticalInferredMarginLocation(Point3d location)
License requirements: drafting ("DRAFTING") . |
void |
BaseCustomSymbol.updateSymbolGeometry(Point3d origin,
double scale,
double angle)
Sets the origin, scale and angle for a custom symbol instance
and updates the leaders (if any) as needed.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
DegreesOfFreedom.basePoint1
First rotation base point.
|
Point3d |
DegreesOfFreedom.basePoint2
Second rotation base point.
|
Point3d |
ClearanceSet.InterferenceData.maxpoint
the points on the interference region at the extremes of depth
|
Point3d |
ClearanceSet.InterferenceData.minpoint
the points on the interference region at the extremes of depth
|
Point3d |
SelectComponent.ValueData.point
selected object point
|
Point3d |
SelectComponent.ValueWithSnapData.point1
first selected object point
|
Point3d |
ClearanceSet.InterferenceData.point1
a point on the first object
|
Point3d |
SelectComponent.ValueWithSnapData.point2
second selected object point
|
Point3d |
ClearanceSet.InterferenceData.point2
a point on the second object
|
Point3d |
DesignElementBuilder.PositionData.position |
Point3d |
Component.PositionData.position
The origin of this component
|
Modifier and Type | Method and Description |
---|---|
Point3d |
BoxSearchTermBuilder.bottomCorner()
Returns
the bottom corner of the box.
|
Point3d |
PlaneSearchTermBuilder.pointOnPlane()
Returns
the normal of the plane.
|
Point3d |
BoxSearchTermBuilder.topCorner()
Returns
the top corner of the box.
|
Modifier and Type | Method and Description |
---|---|
boolean |
SelectComponentList.add(Component selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
ComponentAssembly.AddComponentData |
ComponentAssembly.addComponent(BasePart partToAdd,
String referenceSetName,
String componentName,
Point3d basePoint,
Matrix3x3 orientation,
int layer)
Creates a new
Component in this assembly, based on an existing part file. |
ComponentAssembly.AddComponentData |
ComponentAssembly.addComponent(String partToAdd,
String referenceSetName,
String componentName,
Point3d basePoint,
Matrix3x3 orientation,
int layer)
Creates a new
Component in this assembly, based on an existing part file. |
ComponentAssembly.AddComponentData |
ComponentAssembly.addComponent(String partToAdd,
String referenceSetName,
String componentName,
Point3d basePoint,
Matrix3x3 orientation,
int layer,
boolean uomAsNgc)
Creates a new
Component in this assembly, based on an existing part file. |
ComponentAssembly.AddComponentData |
ComponentAssembly.addMasterPartComponent(Part partToAdd,
String referenceSetName,
String componentName,
Point3d basePoint,
Matrix3x3 orientation,
int layer)
Creates a new
Component in this assembly as master part. |
ComponentAssembly.AddComponentData |
ComponentAssembly.addMasterPartComponent(String partToAdd,
String referenceSetName,
String componentName,
Point3d basePoint,
Matrix3x3 orientation,
int layer)
Creates a new
Component in this assembly as master part. |
PartLoadStatus |
ComponentAssembly.addPendingComponent(String partToAdd,
NXObject pendingComponent,
String referenceSetName,
String componentName,
Point3d basePoint,
Matrix3x3 orientation,
int layer,
boolean uomAsNgc)
Add a pending
Component in this assembly. |
BoxSearchTerm |
SubsetRecipe.createBoxSearchTerm(SearchTerm.SearchTermLogicType logicType,
BoxSearchTerm.BoxOverlapLogicType overlapType,
Point3d bottomCorner,
Point3d topCorner,
boolean trueShapeRefinement)
Creates a
BoxSearchTerm and
adds it to the recipe at the end of the list of search terms. |
PlaneSearchTerm |
SubsetRecipe.createPlaneSearchTerm(SearchTerm.SearchTermLogicType logicType,
PlaneSearchTerm.PlaneOverlapLogicType overlapType,
Vector3d normal,
double displacement,
Point3d pointOnPlane,
boolean trueShapeRefinement)
Creates a
PlaneSearchTerm and
adds it to the recipe at the end of the list of search terms. |
boolean |
SelectComponentList.remove(InferSnapType.SnapType snapType,
Component selection1,
View view1,
Point3d point1,
Component selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
BoxSearchTermBuilder.setBottomCorner(Point3d bottomCorner)
License requirements: nx_4gd_integration ("4th Generation Design") . |
void |
PlaneSearchTermBuilder.setPointOnPlane(Point3d pointOnPlane)
License requirements: nx_4gd_integration ("4th Generation Design") . |
void |
DesignElementBuilder.setPosition(Point3d position,
Matrix3x3 orientation)
Sets the position of design element.
|
void |
BoxSearchTermBuilder.setTopCorner(Point3d topCorner)
License requirements: nx_4gd_integration ("4th Generation Design") . |
void |
SelectComponent.setValue(Component selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectComponentList.setValueWithSnap(InferSnapType.SnapType snapType,
Component selection1,
View view1,
Point3d point1,
Component selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectComponent.setValueWithSnap(InferSnapType.SnapType snapType,
Component selection1,
View view1,
Point3d point1,
Component selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
Constructor and Description |
---|
DegreesOfFreedom(DegreesOfFreedomResult resultInitial,
int numRotationalInitial,
int numTranslationalInitial,
int numInstantaneousRotationalInitial,
int numInstantaneousTranslationalInitial,
DegreesOfFreedomStatus basePoint1StatusInitial,
Point3d basePoint1Initial,
DegreesOfFreedomStatus rotationDirection1StatusInitial,
Vector3d rotationDirection1Initial,
DegreesOfFreedomStatus basePoint2StatusInitial,
Point3d basePoint2Initial,
DegreesOfFreedomStatus rotationDirection2StatusInitial,
Vector3d rotationDirection2Initial,
DegreesOfFreedomStatus translationDirection1StatusInitial,
Vector3d translationDirection1Initial,
DegreesOfFreedomStatus translationDirection2StatusInitial,
Vector3d translationDirection2Initial)
Constructor for the DegreesOfFreedom object.
|
Modifier and Type | Method and Description |
---|---|
Point3d |
SpecifyLocation.cursorLocation()
Returns the CursorLocation
License requirements: None. |
Point3d |
PropertyList.getPoint(int propertyIndex)
Gets the point value for the given index.
|
Point3d |
PropertyList.getPoint(String propertyName)
Gets the point value for the given property name.
|
Point3d |
RadiusDimension.handleOrigin()
Returns the HandleOrigin
License requirements: None. |
Point3d |
LinearDimension.handleOrigin()
Returns the HandleOrigin
License requirements: None. |
Point3d |
AngularDimension.handleOrigin()
Returns the HandleOrigin
License requirements: None. |
Point3d |
SpecifyOrientation.origin()
Returns the Origin
License requirements: None. |
Point3d |
SelectObject.pickPoint()
Returns the PickPoint
License requirements: None. |
Point3d |
SpecifyVector.point()
Returns the Point
License requirements: None. |
Point3d |
SpecifyPoint.point()
Returns the Point
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
SpecifyLocation.setCursorLocation(Point3d cursorLocation)
License requirements: None. |
void |
RadiusDimension.setHandleOrigin(Point3d handleOrogin)
License requirements: None. |
void |
LinearDimension.setHandleOrigin(Point3d handleOrogin)
License requirements: None. |
void |
AngularDimension.setHandleOrigin(Point3d handleOrogin)
License requirements: None. |
void |
SpecifyOrientation.setOrigin(Point3d origin)
License requirements: None. |
void |
SpecifyVector.setPoint(Point3d point)
License requirements: None. |
void |
SpecifyPoint.setPoint(Point3d point)
License requirements: None. |
void |
PropertyList.setPoint(String propertyName,
Point3d pointSc)
Sets the point value for the given property name.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
Post.StreamlineSeed.coordinates |
Point3d |
Result.ResultCoordinateSystemDefinitionData.origin |
Point3d |
SelectCAEFace.ValueData.point
selected object point
|
Point3d |
SelectCAEEdge.ValueData.point
selected object point
|
Point3d |
SelectCAEBody.ValueData.point
selected object point
|
Point3d |
SelectCAEFace.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectCAEEdge.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectCAEBody.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectCAEFace.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectCAEEdge.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectCAEBody.ValueWithSnapData.point2
second selected object point
|
Point3d[] |
ProjectNodesToCadGeometryBuilder.ProximityNodesData.projectLocations |
Modifier and Type | Method and Description |
---|---|
Point3d[] |
Result.askNodeCoordinates(int[] nodeIndex)
Asks for the coordinates of a node array
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
Point3d |
MeshPoint.coordinates()
Returns the coordinates of the point
License requirements: None. |
Point3d |
FreeBodyResultsBuilder.getLocationCoords()
The location definition method by coordinates
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectCAEBodyList.add(CAEBody selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectCAEEdgeList.add(CAEEdge selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectCAEFaceList.add(CAEFace selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectFEElemFaceList.add(FEElemFace selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectFENodeList.add(FENode selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectMeshList.add(Mesh selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
void |
MultipleNodeCreateBuilder.addNodes(Point3d[] positions)
Adds new node definitions at specifiied positions with repect to the
defined refernce coordinate system.
|
void |
MultipleNodeCreateBuilder.addNodes(Point3d[] positions,
int[] labels)
Adds a new node definition at specifiied positions with repect to the
defined refernce coordinate system.
|
double |
ResultAccess.askResultAtLocation(Point3d location)
Ask current component value at a specified location.
|
double[] |
ResultAccess.askResultAtLocationAllComponents(Point3d position)
Ask all component values at a specified position.
|
boolean |
SelectCAEBodyList.remove(InferSnapType.SnapType snapType,
CAEBody selection1,
View view1,
Point3d point1,
CAEBody selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectCAEEdgeList.remove(InferSnapType.SnapType snapType,
CAEEdge selection1,
View view1,
Point3d point1,
CAEEdge selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectCAEFaceList.remove(InferSnapType.SnapType snapType,
CAEFace selection1,
View view1,
Point3d point1,
CAEFace selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectFEElemFaceList.remove(InferSnapType.SnapType snapType,
FEElemFace selection1,
View view1,
Point3d point1,
FEElemFace selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectFENodeList.remove(InferSnapType.SnapType snapType,
FENode selection1,
View view1,
Point3d point1,
FENode selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectMeshList.remove(InferSnapType.SnapType snapType,
Mesh selection1,
View view1,
Point3d point1,
Mesh selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
MeshPoint.setCoordinates(Point3d coordinates)
Sets the coordinates of the point
License requirements: None. |
void |
PostGraphOrbitBuilder.setFreePoints(Point3d[] freePoints)
Set free points for extracting data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
PostGraphBuilder.setFreePoints(Point3d[] freePoints)
Set free points for extracting data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
FreeBodyResultsBuilder.setLocationCoords(Point3d coordinates)
The location definition method by coordinates
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
NodesRepositionBuilder.setNodePosition(FENode fenode,
Point3d position)
Set the new absolute postion for the input node.
|
void |
NodesRepositionBuilder.setNodePositions(FENode[] fenodes,
Point3d[] positions)
Set the new absolute postions for an array of input nodes.
|
void |
PostGraphAlongPathBuilder.setOrigin(Point3d origin)
Set vector origin for extracting data for x axis
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
void |
SelectCAEBody.setValue(CAEBody selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectCAEEdge.setValue(CAEEdge selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectCAEFace.setValue(CAEFace selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectCAEBodyList.setValueWithSnap(InferSnapType.SnapType snapType,
CAEBody selection1,
View view1,
Point3d point1,
CAEBody selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectCAEBody.setValueWithSnap(InferSnapType.SnapType snapType,
CAEBody selection1,
View view1,
Point3d point1,
CAEBody selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectCAEEdgeList.setValueWithSnap(InferSnapType.SnapType snapType,
CAEEdge selection1,
View view1,
Point3d point1,
CAEEdge selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectCAEEdge.setValueWithSnap(InferSnapType.SnapType snapType,
CAEEdge selection1,
View view1,
Point3d point1,
CAEEdge selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectCAEFaceList.setValueWithSnap(InferSnapType.SnapType snapType,
CAEFace selection1,
View view1,
Point3d point1,
CAEFace selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectCAEFace.setValueWithSnap(InferSnapType.SnapType snapType,
CAEFace selection1,
View view1,
Point3d point1,
CAEFace selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectFEElemFaceList.setValueWithSnap(InferSnapType.SnapType snapType,
FEElemFace selection1,
View view1,
Point3d point1,
FEElemFace selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectFENodeList.setValueWithSnap(InferSnapType.SnapType snapType,
FENode selection1,
View view1,
Point3d point1,
FENode selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectMeshList.setValueWithSnap(InferSnapType.SnapType snapType,
Mesh selection1,
View view1,
Point3d point1,
Mesh selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
PostGraphAlongPathBuilder.setVector(Point3d unitvector)
Set vector for extracting data for x axis
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") . |
Constructor and Description |
---|
StreamlineSeed(Post.StreamlineExtraction extractionInitial,
Point3d coordinatesInitial,
int elementIdInitial)
Constructor for the StreamlineSeed object.
|
Modifier and Type | Method and Description |
---|---|
Point3d |
CAMAttribute.getPoint3Value()
Get the feature attribute point3 value for a point3 type attribute
License requirements: None. |
Point3d |
Cycle.getPointValue(String cycleParamName)
Get the point of the parameter
License requirements: cam_base ("CAM BASE") . |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectCAMFeatureList.add(CAMFeature selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
void |
BoundarySet.appendCurves(NXObject[] curves,
Point3d pickPoint,
Matrix3x3 matrix)
Add curves to the boundary
License requirements: cam_base ("CAM BASE") . |
boolean |
SelectCAMFeatureList.remove(InferSnapType.SnapType snapType,
CAMFeature selection1,
View view1,
Point3d point1,
CAMFeature selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
CAMAttribute.setPoint3Value(Point3d attributeValue)
Set the feature attribute point3 value for a point3 type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE") . |
void |
Cycle.setPointValue(String cycleParamName,
Point3d point)
Set the point of the parameter
License requirements: cam_base ("CAM BASE") . |
boolean |
SelectCAMFeatureList.setValueWithSnap(InferSnapType.SnapType snapType,
CAMFeature selection1,
View view1,
Point3d point1,
CAMFeature selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
SteelInsertBuilder.HoleGridOrientationData.gridOrigin |
Point3d[] |
QuickBinderBuilder.EdgesOfFaceData.referencepoints
reference points corresponding to each edge
|
Modifier and Type | Method and Description |
---|---|
Point3d |
DiePlaneBuilder.coordinateSystemOrigin()
Returns the coordinate system origin
License requirements: None. |
Point3d |
DieDirectionBuilder.coordinateSystemOrigin()
Returns the coordinate system origin
License requirements: None. |
Point3d |
OutputCurvesBuilder.firstLimitPoint()
Returns the first limit point.
|
Point3d[] |
SpringbackCompensationBuilder.getProductPoints()
Get the sample points on the product surface.
|
Point3d[] |
SpringbackCompensationBuilder.getSprungPoints()
Get the sample points on the sprung surface.
|
Point3d |
OutputCurvesBuilder.lastLimitPoint()
Returns the last limit point.
|
Point3d |
QuickBinderWrapBuilder.origin()
Returns the origin
License requirements: None. |
Point3d |
LineupBuilder.origin()
Returns the origin of the lineup
License requirements: die_engineering ("DIE ENGINEERING") . |
Point3d |
QuickBinderBuilder.originAnchorOrigin()
Returns the anchor origin of binder sheet body.
|
Point3d |
OutputCurvesBuilder.referencePoint()
Returns the reference point.
|
Point3d |
QuickBinderBuilder.transformOrigin()
Returns the new origin of binder sheet body transformation.
|
Modifier and Type | Method and Description |
---|---|
void |
AddendumSectionBuilder.moveSectionOrigin(Curve section,
Point3d newOrigin,
int useSectionPlane)
Moves addendum section to a new location.
|
void |
DiePlaneBuilder.setCoordinateSystemOrigin(Point3d coordinateSystemOrigin)
License requirements: ug_die_design ("Die Design") . |
void |
DieDirectionBuilder.setCoordinateSystemOrigin(Point3d coordinateSystemOrigin)
License requirements: ug_die_design ("Die Design") . |
void |
OutputCurvesBuilder.setFirstLimitPoint(Point3d firstLimitPoint)
Sets the first limit point.
|
void |
SteelInsertBuilder.setHoleGridOrientation(Point3d gridOrigin,
Matrix3x3 gridMatrix)
License requirements: ug_die_design ("Die Design") . |
void |
OutputCurvesBuilder.setLastLimitPoint(Point3d lastLimitPoint)
Sets the last limit point.
|
void |
QuickBinderWrapBuilder.setOrigin(Point3d origin)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
LineupBuilder.setOrigin(Point3d origin)
Sets the origin of the lineup
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
QuickBinderBuilder.setOriginAnchorOrigin(Point3d origin)
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
SpringbackCompensationBuilder.setProductPoints(Point3d[] productPoints)
Set the sample points on the product surface.
|
void |
QuickBinderBuilder.setReferencePoint(Point3d location)
Set the point used to determine the start and end side of the face.
|
void |
OutputCurvesBuilder.setReferencePoint(Point3d referencePoint)
Sets the reference point.
|
void |
SpringbackCompensationBuilder.setSprungPoints(Point3d[] sprungPoints)
Set the sample points on the sprung surface.
|
void |
QuickBinderBuilder.setTransformOrigin(Point3d origin)
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
Modifier and Type | Field and Description |
---|---|
Point3d |
PlanarShipGridBuilder.ExtentData.point1
First corner point
|
Point3d |
ImageBaseBuilder.CornerPointsData.point1
first corner point of image
|
Point3d |
BoundedGridBuilder.CornerPointsData.point1
First corner point
|
Point3d |
PlanarShipGridBuilder.ExtentData.point2
Second corner point
|
Point3d |
ImageBaseBuilder.CornerPointsData.point2
second corner point of image
|
Point3d |
BoundedGridBuilder.CornerPointsData.point2
Second corner point
|
Point3d |
PlanarShipGridBuilder.ExtentData.point3
Third corner point
|
Point3d |
ImageBaseBuilder.CornerPointsData.point3
third corner point of image
|
Point3d |
BoundedGridBuilder.CornerPointsData.point3
Third corner point
|
Point3d |
PlanarShipGridBuilder.ExtentData.point4
Fourth corner point
|
Point3d |
ImageBaseBuilder.CornerPointsData.point4
fourth corner point of image
|
Point3d |
BoundedGridBuilder.CornerPointsData.point4
Fourth corner point
|
Modifier and Type | Method and Description |
---|---|
Point3d |
CameraBuilder.cameraPosition()
Returns the coordinates of the camera point
License requirements: None. |
Point3d |
DynamicSectionBuilder.getOrigin()
Gets the section origin.
|
Point3d |
BoundedGridBuilder.localOrigin()
Returns the local origin
License requirements: None. |
Point3d |
DecalBuilder.originPosition()
Returns the origin_pos
License requirements: None. |
Point3d |
CameraBuilder.targetPosition()
Returns the coordinates of the target point
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
TransientText.displayTemporaryAbsoluteGeometry(int fontIndex,
View view,
TransientText.ViewType viewType,
DisplayableObject object,
Point3d position)
Displays text as temporary display using absolute geometry.
|
void |
TransientText.displayTemporaryAbsRotScreenSizeGeometry(int fontIndex,
View view,
TransientText.ViewType viewType,
DisplayableObject object,
Point3d position)
Displays text as temporary display using screen geometry but with rotation
defined in absolute space.
|
void |
TransientText.displayTemporaryScreenGeometry(int fontIndex,
View view,
TransientText.ViewType viewType,
DisplayableObject object,
Point3d position)
Displays text as temporary display using screen geometry.
|
void |
NonProportionalZoom.firstPoint(Point3d point1,
View view)
Scales the specified view non-proportionally in the horizontal (X) and vertical (Y)
dimensions, based on a mouse gesture defined by two points in a view.
|
void |
NonProportionalZoom.secondPoint(Point3d point2,
View view)
Scales the specified view non-proportionally in the horizontal (X) and vertical (Y)
dimensions, based on a mouse gesture defined by two points in a view.
|
void |
CameraBuilder.setCameraPosition(Point3d position)
License requirements: None. |
void |
ImageBaseBuilder.setCornerPoints(Point3d point1,
Point3d point2,
Point3d point3,
Point3d point4)
Set the image corner points.
|
boolean |
BoundedGridBuilder.setCornerPoints(Point3d point1,
Point3d point2,
Point3d point3,
Point3d point4)
Sets corner points of the grid
License requirements: None. |
boolean |
PlanarShipGridBuilder.setExtent(Point3d point1,
Point3d point2,
Point3d point3,
Point3d point4)
Set corner points for the grid extent.
|
void |
BoundedGridBuilder.setLocalOrigin(Point3d localOrigin)
License requirements: None. |
void |
DynamicSectionBuilder.setOffsetByPoint(Point3d point)
This method offsets the active clipping plane such that the plane
passes through the specified point.
|
void |
DynamicSectionBuilder.setOrigin(Point3d origin)
Sets the section origin.
|
void |
DecalBuilder.setOriginPosition(Point3d originPosition)
License requirements: None. |
void |
DynamicSectionBuilder.setPlane(Point3d axisOrigin,
Point3d origin,
Matrix3x3 rotationMatrix)
Sets a section plane to be the specified plane
The plane is created at the specified origin with the
specified rotation matrix.
|
void |
CameraBuilder.setTargetPosition(Point3d position)
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Point3d |
CutCopyPasteBuilder.getDefaultToPoint()
Get the default to point.
|
Modifier and Type | Method and Description |
---|---|
void |
CutCopyPasteBuilder.setDefaultToPoint(Point3d dropLocation)
Set the default to point.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
SelectSectionLine.ValueData.point
selected object point
|
Point3d |
SelectDrawingView.ValueData.point
selected object point
|
Point3d |
SelectDrawingRegion.ValueData.point
selected object point
|
Point3d |
SelectDraftingView.ValueData.point
selected object point
|
Point3d |
SelectSectionLine.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectDrawingView.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectDrawingRegion.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectDraftingView.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectSectionLine.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectDrawingView.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectDrawingRegion.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectDraftingView.ValueWithSnapData.point2
second selected object point
|
Modifier and Type | Method and Description |
---|---|
Point3d |
DraftingView.getDrawingReferencePoint()
Returns the view origin(location).
|
Point3d |
FlatPatternObject.getOrigin()
Returns the origin of the marker object (the point on the drawing).
|
Point3d |
SectionLineSegmentsBuilder.sectionLineOnlyPlacementOrigin()
Returns the section line only placement origin center in inferred mode
License requirements: None. |
Point3d |
ViewStylePerspectiveBuilder.viewOrigin()
Returns the perspective view origin on the PERSPECTIVE tab of the View Style Dialog
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectDraftingViewList.add(DraftingView selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectDrawingViewList.add(DrawingView selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
BaseView |
SheetDraftingViewCollection.createBaseView(ModelingView modelView,
Point3d drawingReferencePoint,
double viewScale,
boolean inheritClippingBoundry)
For the selected part adds the base view as well as returns the reference to
DraftingView . |
ProjectedView |
SheetDraftingViewCollection.createProjectedView(DraftingView parentView,
Point3d drawingReferencePoint)
Lets you add a projected view (Orthoraphic View) for the selected parent view.
|
ProjectedView |
SheetDraftingViewCollection.createProjectedView(DraftingView parentView,
Point3d drawingReferencePoint,
nxopen.Direction hingeLine)
Lets you add a projected view (A View) for the selected parent view.
|
void |
DraftingView.moveView(Point3d drawingReferencePoint)
Sets the view origin at the provided location.
|
boolean |
SelectDraftingViewList.remove(InferSnapType.SnapType snapType,
DraftingView selection1,
View view1,
Point3d point1,
DraftingView selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectDrawingViewList.remove(InferSnapType.SnapType snapType,
DrawingView selection1,
View view1,
Point3d point1,
DrawingView selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
DraftingView.setDrawingReferencePoint(Point3d drawingReferencePoint)
Sets the view origin at the provided location.
|
void |
SectionLineSegmentsBuilder.setSectionLineOnlyPlacementOrigin(Point3d coordinates)
License requirements: None. |
void |
SelectDraftingView.setValue(DraftingView selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectDrawingRegion.setValue(DrawingRegion selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectDrawingView.setValue(DrawingView selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectSectionLine.setValue(SectionLine selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectDraftingViewList.setValueWithSnap(InferSnapType.SnapType snapType,
DraftingView selection1,
View view1,
Point3d point1,
DraftingView selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectDraftingView.setValueWithSnap(InferSnapType.SnapType snapType,
DraftingView selection1,
View view1,
Point3d point1,
DraftingView selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectDrawingRegion.setValueWithSnap(InferSnapType.SnapType snapType,
DrawingRegion selection1,
View view1,
Point3d point1,
DrawingRegion selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectDrawingViewList.setValueWithSnap(InferSnapType.SnapType snapType,
DrawingView selection1,
View view1,
Point3d point1,
DrawingView selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectDrawingView.setValueWithSnap(InferSnapType.SnapType snapType,
DrawingView selection1,
View view1,
Point3d point1,
DrawingView selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectSectionLine.setValueWithSnap(InferSnapType.SnapType snapType,
SectionLine selection1,
View view1,
Point3d point1,
SectionLine selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
ViewStylePerspectiveBuilder.setViewOrigin(Point3d viewOrigin)
License requirements: drafting ("DRAFTING") . |
Modifier and Type | Field and Description |
---|---|
Point3d |
FacetedFace.SurfaceData.dir |
Point3d |
FacetedEdge.CurveData.dirOrEndPt |
Point3d |
SelectFacetedBody.ValueData.point
selected object point
|
Point3d |
SelectFacetedBody.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectFacetedBody.ValueWithSnapData.point2
second selected object point
|
Point3d |
FacetedFace.SurfaceData.position |
Point3d |
FacetedEdge.CurveData.position |
Point3d |
FacetedEdge.VerticesData.vertex1
First vertex in the edge
|
Point3d |
FacetedEdge.VerticesData.vertex2
Second vertex in the edge
|
Point3d |
FacetedEdge.CurveData.xAxis |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectFacetedBodyList.add(FacetedBody selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
void |
PaintBrushBuilder.paintVertexColor(Point3d position)
Paints facet body vertex color
License requirements: None. |
boolean |
SelectFacetedBodyList.remove(InferSnapType.SnapType snapType,
FacetedBody selection1,
View view1,
Point3d point1,
FacetedBody selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
SelectFacetedBody.setValue(FacetedBody selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectFacetedBodyList.setValueWithSnap(InferSnapType.SnapType snapType,
FacetedBody selection1,
View view1,
Point3d point1,
FacetedBody selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectFacetedBody.setValueWithSnap(InferSnapType.SnapType snapType,
FacetedBody selection1,
View view1,
Point3d point1,
FacetedBody selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
SelectPartModule.ValueData.point
selected object point
|
Point3d |
SelectFlatPattern.ValueData.point
selected object point
|
Point3d |
SelectPartModule.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectFlatPattern.ValueWithSnapData.point1
first selected object point
|
Point3d |
MeshSurfaceBuilder.AngleAlignmentPointsData.point1
Point 1
|
Point3d |
SelectPartModule.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectFlatPattern.ValueWithSnapData.point2
second selected object point
|
Point3d |
MeshSurfaceBuilder.AngleAlignmentPointsData.point2
Point 2
|
Point3d |
OffsetCurveBuilder.ComputeOffsetDirectionData.startpoint
start point of direction
|
Point3d |
WaveSketchBuilder.WaveLinkInformationData.xformOrigin
transformation origin
|
Point3d |
WaveRoutingBuilder.WaveLinkInformationData.xformOrigin
transformation origin
|
Point3d |
WavePointBuilder.WaveLinkInformationData.xformOrigin
transformation origin
|
Point3d |
WaveDatumBuilder.WaveLinkInformationData.xformOrigin
transformation origin
|
Point3d |
MirrorBodyBuilder.WaveLinkInformationData.xformOrigin
transformation origin
|
Point3d |
ExtractFaceBuilder.WaveLinkInformationData.xformOrigin
transformation origin
|
Point3d |
DatumCsysBuilder.WaveLinkInformationData.xformOrigin
transformation origin
|
Point3d |
CompositeCurveBuilder.WaveLinkInformationData.xformOrigin
transformation origin
|
Modifier and Type | Method and Description |
---|---|
Point3d |
ToolingBoxBuilder.boxPosition()
Returns the position of csys for box.
|
Point3d |
TrimCurveBuilder.firstBoundingObjectPickPoint()
Returns the pick point for the first bounding object
License requirements: None. |
Point3d[] |
ResizePlaneBuilder.getCornerPoints()
Gets the four corner points for resizing a datum plane
License requirements: solid_modeling ("SOLIDS MODELING") . |
Point3d |
HumanBuilder.getHandGoalPosition(HumanData.SideType side)
Gets hand goal position for active reach, returns null if the hand goal type is not hand figure
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
Point3d |
OffsetSurfaceBuilder.getInteriorPosition()
Gets the offset surface interior position for specify interior position method.
|
Point3d[] |
HolePackage.getOrigins()
Returns the number of holes and corresponding origins of the hole package
License requirements: solid_modeling ("SOLIDS MODELING") . |
Point3d |
TrimCornerBuilder.getReferencePoint()
Returns the reference point
License requirements: None. |
Point3d |
HumanBuilder.inverseKinematicsPosition()
Returns the position of dynamic drag.
|
Point3d |
RasterImage.origin()
Returns the origin of the raster image
License requirements: None. |
Point3d |
CylinderBuilder.origin()
Returns the cylinder origin
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
Point3d |
RadialDimensionBuilder.pickPoint()
Returns the pick point
License requirements: None. |
Point3d |
FillHoleBuilder.pickPoint()
Returns the picking point on the facet body
License requirements: None. |
Point3d |
HumanBuilder.position()
Returns the human position
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
Point3d |
HumanBuilder.referencePointCoordinates()
Returns the reference point coordinates
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
Point3d |
SnipSurfaceBuilder.regionPickPoint()
Returns the 3D point picked on surface in Select Face
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Point3d |
TrimCurveBuilder.secondBoundingObjectPickPoint()
Returns the pick point for the second bounding object
License requirements: None. |
Point3d |
SnipSurfaceBuilder.surfacePointUV()
Returns the UV values of the picked point on surface
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Point3d |
RPODimension.targetPoint()
Returns the target point of dimension.
|
Point3d |
RPODimension.toolPoint()
Returns the tool point of dimension.
|
Point3d |
AssociativeArcBuilder.zonePoint()
Returns the zone point is required when arc has multiple solution with radius constraint or two points
of arc constraints are same or middle constraint is tangent.
|
Modifier and Type | Method and Description |
---|---|
boolean |
SelectDatumCsysList.add(DatumCsys selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectFeatureList.add(Feature selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
ConcaveFacesBuilder.CalculatePointCurvatureData |
ConcaveFacesBuilder.calculatePointCurvature(Face faceId,
Point3d point)
The radius values at the point selected on a targeted face, the maximum and minimum radius of the targeted face.
|
OffsetCurveBuilder.ComputeOffsetDirectionData |
OffsetCurveBuilder.computeOffsetDirection(ICurve seedEntity,
Point3d seedPoint)
To compute offset direction on the seed entity at the given seed point.
|
Curve |
GuidedExtensionBuilderEx.createGuideLine(Edge assocEdge,
Point3d guideLinePnt,
Vector3d guideLineVector,
double guideLineLength)
Creates a guide line at one of the end points of the sheet edge in the selection.
|
RasterImage |
FeatureCollection.createRasterImage(Point3d origin,
Matrix3x3 matrix,
double length,
double height,
String imageFileName,
double translucency,
RasterImage.MaxTextureSize maximumTextureSize)
Creates a raster image
License requirements: studio_visualize ("STUDIO VISUALIZE") . |
void |
FitSurfaceBuilder.editCSYS(Point3d originCsys,
Matrix3x3 matCsys)
The edit CSYS for Orientation option
License requirements: None. |
void |
Offset3DCurveBuilder.flipOffsetCurveDirection(ICurve inputCurve,
Point3d point,
boolean reverseDirection)
Routine to store the output curves and the flip logical in the builder
License requirements: solid_modeling ("SOLIDS MODELING") . |
boolean |
AngularDimBuilder.getIsComplementAngle(Point3d dimensionLocation)
Returns the flag indicating if angle is complement
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
StudioSplineBuilderEx.insertKnot(Point3d point)
Inserts knot at a closest point on the spline
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") . |
void |
RapidSurfaceBuilder.moveNode(Point point,
Point3d newPosition)
Moves node
License requirements: studio_free_form ("STUDIO FREE FORM") . |
boolean |
SelectDatumCsysList.remove(InferSnapType.SnapType snapType,
DatumCsys selection1,
View view1,
Point3d point1,
DatumCsys selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectFeatureList.remove(InferSnapType.SnapType snapType,
Feature selection1,
View view1,
Point3d point1,
Feature selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
MeshSurfaceBuilder.setAngleAlignmentPoints(Point3d point1,
Point3d point2)
Set angle alignment points.
|
void |
ToolingBoxBuilder.setBoxMatrixAndPosition(Matrix3x3 matrix,
Point3d position)
Sets box csys matrix.
|
void |
ToolingBoxBuilder.setBoxPosition(Point3d csysOrigin)
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING") . |
void |
ResizePlaneBuilder.setCornerPoints(Point3d[] cornerPoints)
Sets the four corner points for resizing a datum plane
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
DatumPlaneBuilder.setCornerPoints(Point3d corner1,
Point3d corner2,
Point3d corner3,
Point3d corner4)
Sets corner points to builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
RapidSurfaceBuilder.setDefiningPoint(int index,
Point3d coordination,
int facetID)
Sets a defining point
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
TrimCurveBuilder.setFirstBoundingObjectPickPoint(Point3d firstBndgObjPickPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") . |
void |
HumanBuilder.setHandGoalPosition(HumanData.SideType side,
Point3d goalPosition)
Sets hand goal position for active reach, the hand goal type should be hand figure
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
void |
OffsetSurfaceBuilder.setInteriorPosition(Point3d point)
Sets the offset surface interior position for specify interior position method.
|
void |
HumanBuilder.setInverseKinematicsPosition(Point3d position)
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
void |
CylinderBuilder.setOrigin(Point3d origin)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") . |
void |
RadialDimensionBuilder.setPickPoint(Point3d pickPoint)
License requirements: None. |
void |
FillHoleBuilder.setPickPoint(Point3d pickPoint)
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING") . |
void |
HumanBuilder.setPosition(Point3d location)
Sets human position
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling") . |
void |
TrimCornerBuilder.setReferencePoint(Point3d referencePoint)
Sets the reference point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
HumanBuilder.setReferencePointCoordinates(Point3d referencePointCoordinates)
Sets the reference point coordinates.
|
void |
SnipSurfaceBuilder.setRegionPickPoint(Point3d pnt)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
TrimCurveBuilder.setSecondBoundingObjectPickPoint(Point3d secondBndgObjPickPoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") . |
void |
SnipSurfaceBuilder.setSurfacePointUV(Point3d surfacePointUV)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
void |
RPOBuilder.setTargetAndTool(PositioningDimension.Subtype subtype,
NXObject target,
RPOBuilder.AssociativityType targetAssociativity,
Point3d targetHelpPoint,
NXObject tool,
RPOBuilder.AssociativityType toolAssociativity,
Point3d toolHelpPoint)
Sets the target and tool entities.
|
void |
RPODimension.setTargetPoint(Point3d referencePoint1)
License requirements: None. |
void |
RPODimension.setToolPoint(Point3d referencePoint2)
License requirements: None. |
void |
SelectFlatPattern.setValue(FlatPattern selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectPartModule.setValue(PartModule selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectDatumCsysList.setValueWithSnap(InferSnapType.SnapType snapType,
DatumCsys selection1,
View view1,
Point3d point1,
DatumCsys selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectFeatureList.setValueWithSnap(InferSnapType.SnapType snapType,
Feature selection1,
View view1,
Point3d point1,
Feature selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectFlatPattern.setValueWithSnap(InferSnapType.SnapType snapType,
FlatPattern selection1,
View view1,
Point3d point1,
FlatPattern selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectPartModule.setValueWithSnap(InferSnapType.SnapType snapType,
PartModule selection1,
View view1,
Point3d point1,
PartModule selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
AssociativeArcBuilder.setZonePoint(Point3d zonePoint)
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") . |
void |
RasterImage.update(Point3d origin,
Matrix3x3 matrix,
double length,
double height,
String imageFileName,
double translucency,
RasterImage.MaxTextureSize maximumTextureSize)
Updates a raster image feature
License requirements: studio_visualize ("STUDIO VISUALIZE") . |
Modifier and Type | Field and Description |
---|---|
Point3d |
GussetBuilder.PlacementOriginAndDirectionData.origin
Start point from which placement distance is measured.
|
Modifier and Type | Method and Description |
---|---|
Point3d |
LoftedFlangeBuilder.endSectionPoint()
Returns the start/end point of the end section.It can be start/end point of the section profile.
|
Point3d |
FlatSolidBuilder.referenceVertex()
Returns the end of the edge where the tangent will define the x axis for flat as solid.
|
Point3d |
FlatPatternBuilder.referenceVertex()
Returns the end of the edge where the tangent will define the x axis for flat as solid.
|
Point3d |
LoftedFlangeBuilder.startSectionPoint()
Returns the start/end point of the start section.It can be start/end point of the section profile.
|
Point3d |
FlangeBuilder.vertex()
Returns the vertex on the flange edge, needed to dimension the flange width.
|
Modifier and Type | Method and Description |
---|---|
void |
LoftedFlangeBuilder.setEndSectionPoint(Point3d point)
Sets the start/end point of the end section.It can be start/end point of the section profile.
|
void |
FlatSolidBuilder.setReferenceVertex(Point3d vertex)
Sets the end of the edge where the tangent will define the x axis for flat as solid.
|
void |
FlatPatternBuilder.setReferenceVertex(Point3d vertex)
Sets the end of the edge where the tangent will define the x axis for flat as solid.
|
void |
LoftedFlangeBuilder.setStartSectionPoint(Point3d point)
Sets the start/end point of the start section.It can be start/end point of the section profile.
|
void |
FlangeBuilder.setVertex(Point3d vertex)
Sets the vertex on the flange edge, needed to dimension the flange width.
|
Modifier and Type | Method and Description |
---|---|
Point3d[] |
PlateBuilder.getMultipleRegionPoints()
Gets multiple region points.
|
Point3d |
RollingLineBuilder.pointOnFace()
Returns the point specified by the surface selection.
|
Point3d |
StiffenerBuilder.referencePoint()
Returns the reference point (part units)
License requirements: None. |
Point3d |
EdgeCutBuilder.referencePoint()
Returns the reference point (part units)
License requirements: None. |
Point3d |
PlateBuilder.regionPoint()
Returns the region point, which is used to identify the plate region.
|
Modifier and Type | Method and Description |
---|---|
void |
PlateBuilder.addRegionPoint(Point3d regionPoint)
Adds a region point.
|
void |
ShipCoordinatesBuilder.evaluatePointInformation(Point3d position)
Evaluates the point per position and and sets them into ShipCoordinatesBuilder builder.
|
void |
PlateBuilder.mapRegionToRegionPoint(String plateRegionString,
Point3d regionPoint)
Maps the user selected plate region to a region point.
|
void |
PlateBuilder.removeRegionPoint(Point3d regionPoint)
Removes a region point.
|
void |
ProfileSystemBuilder.setBoundaryOnePoints(Point3d[] points)
Sets the selected intersection points for the first boundary.
|
void |
ProfileSystemBuilder.setBoundaryTwoPoints(Point3d[] points)
Set the selected intersection points for the second boundary.
|
void |
RollingLineBuilder.setPointOnFace(Point3d pointOnFace)
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing") . |
void |
ShipCoordinatesBuilder.setPosition(Point3d position)
Sets the point information into the ShipCoordinate builder and a standard point will be created according to the position.
|
void |
StiffenerBuilder.setReferencePoint(Point3d referencePoint)
License requirements: nx_ship_detail ("Ship Detail Design") . |
void |
EdgeCutBuilder.setReferencePoint(Point3d referencePoint)
License requirements: nx_ship_detail ("Ship Detail Design") . |
void |
PlateBuilder.setRegionPoint(Point3d regionPoint)
License requirements: nx_ship_detail ("Ship Detail Design") . |
void |
PlateSystemBuilder.setRegionPoints(Point3d[] regionPoints)
Set the points derived from the regions of the sheet, that has the inscribed boundaries, to keep for the final
plate system shape.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
CageManipulatorData.ObjectMoveData.beginDragCursorPosition
The point from which object dragging is initiated, the point
under the cursor when seen in view direction.
|
Point3d |
CageManipulatorData.ObjectMoveData.beginDragObjectPosition
The point on object near cursor from which object dragging is initiated
|
Point3d |
CageManipulatorData.ObjectSelectionData.selectionPosition
The point at which object is selected, the point
under the cursor when seen in view direction.
|
Modifier and Type | Method and Description |
---|---|
void |
SubdivisionSplitFaceBuilder.addSplitPoint(Point3d location,
DisplayableObject object)
Add split face point.
|
void |
SelectCageObjectData.clearAndAdd(NXObject[] objects,
View view,
Point3d point)
Clears the currently present objects and adds new objects.
|
void |
CageManipulatorData.move(Point3d moveToPoint,
boolean isSnapGesture)
Deprecated.
Deprecated in NX10.0.0. Use
CageManipulatorData.move(nxopen.Point3d, boolean) with optional constraint point instead.
|
void |
CageManipulatorData.move(Point3d moveToPoint,
Point point,
boolean isSnapGesture)
Moves the objects by dragging.
|
void |
SelectCageObjectData.setCursorLocation(Point3d point)
Sets the cursor location in absolute coordinates.
|
void |
SubdivisionSplitFaceBuilder.updateSplitPositions(int splitLineIndex,
Point3d[] positions)
Update split positions.
|
Constructor and Description |
---|
ObjectMoveData(NXObject draggedObjectInitial,
Point3d beginDragCursorPositionInitial,
Point3d beginDragObjectPositionInitial,
View viewInitial,
double micropositioningScaleInitial,
Vector3d viewDirectionInitial)
Constructor for the ObjectMoveData object.
|
ObjectSelectionData(NXObject selectedObjectInitial,
Point3d selectionPositionInitial,
Vector3d viewDirectionInitial,
boolean isSnappedPositionInitial)
Constructor for the ObjectSelectionData object.
|
Modifier and Type | Method and Description |
---|---|
void |
TireEnvelopeBuilder.setSuspentionTemplatePoint(TireEnvelopeBuilder.SuspensionTemplateType templateType,
int jointIndex,
Point3d pnt)
Change the location of a joint in the suspension template.
|
void |
TireEnvelopeBuilder.setVehicleCoordinateSystem(int type,
Point3d origin,
Matrix3x3 matrix)
Set the vehicle coordinate system.
|
Modifier and Type | Method and Description |
---|---|
void |
ShapeSegmentBuilder.addRadialPivot(Point3d pivotLocation,
int bendMethod,
double bendValue)
License requirements: routing_harness ("Routing Harness") . |
int |
ShapeSegmentBuilder.addSplinePoint(Point3d pointLocation)
Adds a point to the existing spline.
|
void |
ShapeSegmentBuilder.createNewRadialBend(Point3d firstPivot,
int firstBendMethod,
double firstBendValue,
Point3d secondPivot,
int secondBendMethod,
double secondBendValue)
License requirements: routing_harness ("Routing Harness") . |
void |
ShapeSegmentBuilder.createNewSpline(Point3d anchorLocation,
Point3d firstPoint,
Point3d secondPoint)
License requirements: routing_harness ("Routing Harness") . |
void |
ShapeSegmentBuilder.updateRadialPivot(int pivotIndex,
Point3d newLocation,
int newBendMethod,
double newBendValue)
License requirements: routing_harness ("Routing Harness") . |
void |
ShapeSegmentBuilder.updateSplinePoint(int pointIndex,
Point3d pointLocation,
boolean inDrag)
License requirements: routing_harness ("Routing Harness") . |
Modifier and Type | Method and Description |
---|---|
Point3d |
CopyCutBuilder.initialCopyLocation()
Returns the initial copy location mainly used to define default copy location of sketch objects
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
CopyCutBuilder.setInitialCopyLocation(Point3d copyLocation)
License requirements: None. |
Modifier and Type | Field and Description |
---|---|
Point3d |
GeometricProperties.CaeCurve.closestPoint
closest point on curve in Root Part Coordinates
|
Point3d |
GeometricProperties.CaeFace.closestPointInWcs
closest point in Work Part Coordinates
|
Point3d |
GeometricProperties.CaeCurve.closestPointInWcs
closest point on curve in Work Part Coordinates
|
Point3d |
GeometricProperties.Face.position
XYZ Position
|
Point3d |
GeometricProperties.Edge.position
XYZ Position in Root Part coordinates
|
Point3d |
GeometricProperties.Face.positionInWcs
XYZ Position in Work Part coordinates
|
Point3d |
GeometricProperties.Edge.positionInWcs
XYZ Position in Work Part coordinates
|
Modifier and Type | Method and Description |
---|---|
Point3d |
DraftAnalysisBuilder.drawOrigin()
Returns the draw origin
License requirements: None. |
Point3d |
HighlightLinesAnalysisBuilder.lightPlaneOrigin()
Returns the origin of the light plane
License requirements: None. |
Point3d |
FaceCurvatureAnalysisBuilder.normalOrigin()
Returns the normal origin when normal curvature values are to be computed and displayed.
|
Point3d |
FaceCurvatureAnalysisBuilder.sectionOrigin()
Returns the section origin for sectional curvatures.
|
Modifier and Type | Method and Description |
---|---|
GeometricProperties.CaeCurvePropertiesData |
GeometricProperties.getCaeCurveProperties(NXObject entityTag,
Point3d absPoint)
Returns CAE curve local properties at the given point
License requirements: None. |
GeometricProperties.CaeFacePropertiesData |
GeometricProperties.getCaeFaceProperties(NXObject entityTag,
Point3d absPoint)
Returns CAE face local properties at the given point
License requirements: None. |
GeometricProperties.EdgePropertiesData |
GeometricProperties.getEdgeProperties(NXObject entityTag,
Point3d absPoint)
Returns edge/curve local properties at the given point
License requirements: None. |
GeometricProperties.FacePropertiesData |
GeometricProperties.getFaceProperties(NXObject entityTag,
Point3d absPoint)
Returns face local properties at the given point
License requirements: None. |
GeometricProperties.Status |
GeometricProperties.listProperties(NXObject entityTag,
Point3d absPoint)
Displays the local properties of the specified object at the
given point in the listing window
License requirements: None. |
GeometricProperties.Status |
GeometricProperties.listProperties(Point3d absPoint)
Displays the local properties of
GeometricProperties.objectsForAnalysis() at the given point in
the listing window. |
void |
DraftAnalysisBuilder.setDrawOrigin(Point3d drawOrigin)
License requirements: studio_analyze ("STUDIO ANALYZE") . |
void |
HighlightLinesAnalysisBuilder.setLightPlaneOrigin(Point3d origin)
Sets the origin of the light plane.
|
void |
FaceCurvatureAnalysisBuilder.setNormalOrigin(Point3d normalOrigin)
License requirements: studio_analyze ("STUDIO ANALYZE") . |
void |
FaceCurvatureAnalysisBuilder.setSectionOrigin(Point3d sectionOrigin)
License requirements: studio_analyze ("STUDIO ANALYZE") . |
void |
SurfaceContinuityAnalysisBuilder.updateFace(Face face,
Point3d selectionPoint)
User selects or deselects face, update builder m_edge2, m_face2
License requirements: gateway ("UG GATEWAY") . |
void |
SurfaceContinuityAnalysisBuilder.updateFirstEdgeFace(DisplayableObject edgeOrFace,
Point3d selectionPoint)
The user selects or deselects first edge or face, update builder m_edge1, m_face1
License requirements: gateway ("UG GATEWAY") . |
void |
SurfaceContinuityAnalysisBuilder.updateSecondEdgeFace(DisplayableObject edgeOrFace,
Point3d selectionPoint)
User selects or deselects second edge or face, update builder m_edge2, m_face2
License requirements: gateway ("UG GATEWAY") . |
Constructor and Description |
---|
CaeCurve(double arcLengthParameterInitial,
double unitArcLengthParameterInitial,
Point3d closestPointInWcsInitial,
Vector3d normalInWcsInitial,
Vector3d tangentInWcsInitial,
Vector3d tangentInitial,
Vector3d normalInitial,
Point3d closestPointInitial)
Constructor for the CaeCurve object.
|
CaeFace(Vector3d closestPointInitial,
double uParameterInitial,
double vParameterInitial,
Vector3d normalInitial,
Point3d closestPointInWcsInitial,
Vector3d normalInWcsInitial,
Vector3d uDerivativeInitial,
Vector3d vDerivativeInitial,
Vector3d uDerivativeInWcsInitial,
Vector3d vDerivativeInWcsInitial)
Constructor for the CaeFace object.
|
Edge(double parameterPercentageInitial,
double parameterInitial,
Point3d positionInWcsInitial,
Point3d positionInitial,
Vector3d tangentInWcsInitial,
Vector3d tangentInitial,
Vector3d normalInWcsInitial,
Vector3d normalInitial,
Vector3d binormalInWcsInitial,
Vector3d binormalInitial,
double torsionInitial,
double curvatureInitial)
Constructor for the Edge object.
|
Face(double uParamaterInitial,
double vParamaterInitial,
Point3d positionInWcsInitial,
Vector3d uDerivativeInWcsInitial,
Vector3d vDerivativeInWcsInitial,
Vector3d normalInWcsInitial,
Point3d positionInitial,
Vector3d uDerivativeInitial,
Vector3d vDerivativeInitial,
Vector3d normalInitial,
double invOfMinRadiusOfCurvatureInitial,
double invOfMaxRadiusOfCurvatureInitial)
Constructor for the Face object.
|
Modifier and Type | Method and Description |
---|---|
Point3d |
XYZPlaneBuilder.anchorOrigin()
Returns the anchor position
License requirements: None. |
Point3d |
SectionPlaneBuilder.origin()
Returns the plane origin
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
XYZPlaneBuilder.setAnchorOrigin(Point3d anchorOrigin)
License requirements: studio_analyze ("STUDIO ANALYZE") . |
void |
SectionPlaneBuilder.setOrigin(Point3d origin)
License requirements: studio_analyze ("STUDIO ANALYZE") . |
Modifier and Type | Method and Description |
---|---|
Point3d[] |
BoundaryDefinitionBuilder.getPoints()
Queries all the boundary definition points
License requirements: studio_free_form ("STUDIO FREE FORM") . |
Point3d |
ModlMotion.manipulatorOrigin()
Returns the origin point of manipulator for
ModlMotion.Options.DYNAMIC
motion option. |
Point3d |
AnchorLocatorBuilder.origin()
Returns the origin of the plane
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
InteractiveSectionBuilder.appendPlane(Point3d point1,
Point3d point2,
Point3d origin,
Vector3d normal)
Appends a plane
License requirements: studio_free_form ("STUDIO FREE FORM") . |
void |
BoundaryDefinitionBuilder.appendPoint(Point3d point,
boolean isKeyPoint)
Appends a point to the boundary definition
License requirements: studio_free_form ("STUDIO FREE FORM") . |
OnPathDimensionBuilder |
AlignmentMethodBuilder.createOnPathDimBuilder(Section sec,
Point3d pnt)
Set the sections.
|
void |
TransformerData.reposition(Point3d origin,
Matrix3x3 matrix)
Repositions the tool at a coordinate system.
|
void |
TransformerData.repositionByOrigin(Point3d origin)
Repositions the tool by changing its origin.
|
void |
TransformerData.repositionByPlane(TransformerData.ObjectType objectType,
Point3d planeOrigin,
Vector3d planeNormal)
Repositions the tool by changing its plane.
|
void |
ModlMotion.setManipulatorOrigin(Point3d manipulatorOrigin)
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") . |
void |
RegionTracker.setOnePointSelector(Point3d location)
The input point location (x,y,z) used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
AnchorLocatorBuilder.setOrigin(Point3d origin)
License requirements: None. |
void |
ControlPoleManagerData.updatePolePositions(int groupIndex,
int[] poleIndex,
Point3d[] newPosition)
Updates pole positions
License requirements: studio_free_form ("STUDIO FREE FORM") . |
Modifier and Type | Field and Description |
---|---|
Point3d |
Component.AnchorPointData.anchorpoint |
Point3d |
SelectComponent.ValueData.point
selected object point
|
Point3d |
SelectComponent.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectComponent.ValueWithSnapData.point2
second selected object point
|
Modifier and Type | Method and Description |
---|---|
Point3d |
InsertComponentBuilder.specifyPoint()
Returns the point specified to put the 2D Component instance
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
boolean |
SelectComponentList.add(Component selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectComponentList.remove(InferSnapType.SnapType snapType,
Component selection1,
View view1,
Point3d point1,
Component selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
InsertComponentBuilder.setSpecifyPoint(Point3d specifyPoint)
License requirements: nx_layout ("NX Layout") . |
void |
SelectComponent.setValue(Component selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
boolean |
SelectComponentList.setValueWithSnap(InferSnapType.SnapType snapType,
Component selection1,
View view1,
Point3d point1,
Component selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectComponent.setValueWithSnap(InferSnapType.SnapType snapType,
Component selection1,
View view1,
Point3d point1,
Component selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
SelectTagFormObject.ValueData.point
selected object point
|
Point3d |
SelectSystemObject.ValueData.point
selected object point
|
Point3d |
SelectRigidBody.ValueData.point
selected object point
|
Point3d |
SelectPhysicsJoint.ValueData.point
selected object point
|
Point3d |
SelectPhysicsConstraint.ValueData.point
selected object point
|
Point3d |
SelectCollisionSensor.ValueData.point
selected object point
|
Point3d |
SelectAdapterSignal.ValueData.point
selected object point
|
Point3d |
SelectTagFormObject.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectSystemObject.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectRigidBody.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectPhysicsJoint.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectPhysicsConstraint.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectCollisionSensor.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectAdapterSignal.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectTagFormObject.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectSystemObject.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectRigidBody.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectPhysicsJoint.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectPhysicsConstraint.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectCollisionSensor.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectAdapterSignal.ValueWithSnapData.point2
second selected object point
|
Modifier and Type | Method and Description |
---|---|
boolean |
SelectCollisionSensorList.add(CollisionSensor selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectLogicObjectList.add(LogicObject selection,
View view,
Point3d point)
Adds the object with the objects view and objects point
License requirements: None. |
boolean |
SelectCollisionSensorList.remove(InferSnapType.SnapType snapType,
CollisionSensor selection1,
View view1,
Point3d point1,
CollisionSensor selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
boolean |
SelectLogicObjectList.remove(InferSnapType.SnapType snapType,
LogicObject selection1,
View view1,
Point3d point1,
LogicObject selection2,
View view2,
Point3d point2)
Remove specified object from list.
|
void |
SelectAdapterSignal.setValue(AdapterSignal selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectCollisionSensor.setValue(CollisionSensor selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectPhysicsConstraint.setValue(PhysicsConstraint selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectPhysicsJoint.setValue(PhysicsJoint selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectRigidBody.setValue(RigidBody selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectSystemObject.setValue(SystemObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectTagFormObject.setValue(TagFormObject selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectAdapterSignal.setValueWithSnap(InferSnapType.SnapType snapType,
AdapterSignal selection1,
View view1,
Point3d point1,
AdapterSignal selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectCollisionSensorList.setValueWithSnap(InferSnapType.SnapType snapType,
CollisionSensor selection1,
View view1,
Point3d point1,
CollisionSensor selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectCollisionSensor.setValueWithSnap(InferSnapType.SnapType snapType,
CollisionSensor selection1,
View view1,
Point3d point1,
CollisionSensor selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
boolean |
SelectLogicObjectList.setValueWithSnap(InferSnapType.SnapType snapType,
LogicObject selection1,
View view1,
Point3d point1,
LogicObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectPhysicsConstraint.setValueWithSnap(InferSnapType.SnapType snapType,
PhysicsConstraint selection1,
View view1,
Point3d point1,
PhysicsConstraint selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectPhysicsJoint.setValueWithSnap(InferSnapType.SnapType snapType,
PhysicsJoint selection1,
View view1,
Point3d point1,
PhysicsJoint selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectRigidBody.setValueWithSnap(InferSnapType.SnapType snapType,
RigidBody selection1,
View view1,
Point3d point1,
RigidBody selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectSystemObject.setValueWithSnap(InferSnapType.SnapType snapType,
SystemObject selection1,
View view1,
Point3d point1,
SystemObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectTagFormObject.setValueWithSnap(InferSnapType.SnapType snapType,
TagFormObject selection1,
View view1,
Point3d point1,
TagFormObject selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
SelectMarker.ValueData.point
selected object point
|
Point3d |
SelectLink.ValueData.point
selected object point
|
Point3d |
SelectJoint.ValueData.point
selected object point
|
Point3d |
PackagingMeasureBuilder.GeometryData.point
Start point
|
Point3d |
SelectMarker.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectLink.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectJoint.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectMarker.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectLink.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectJoint.ValueWithSnapData.point2
second selected object point
|
Modifier and Type | Method and Description |
---|---|
void |
SelectJoint.setValue(Joint selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectLink.setValue(Link selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectMarker.setValue(Marker selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectJoint.setValueWithSnap(InferSnapType.SnapType snapType,
Joint selection1,
View view1,
Point3d point1,
Joint selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectLink.setValueWithSnap(InferSnapType.SnapType snapType,
Link selection1,
View view1,
Point3d point1,
Link selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectMarker.setValueWithSnap(InferSnapType.SnapType snapType,
Marker selection1,
View view1,
Point3d point1,
Marker selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
Constructor and Description |
---|
GeometryData(DisplayableObject geometryInitial,
Point3d pointInitial,
Vector3d vectorInitial,
nxopen.Direction directionInitial)
Constructor for the GeometryData object.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
DesignElementRevision.TransformData.positioninmeters |
Modifier and Type | Method and Description |
---|---|
Point3d |
ConstraintReference.helpPoint()
Returns
the help point of the constraint reference.
|
Modifier and Type | Method and Description |
---|---|
void |
Network.dragByRay(Point3d point,
Vector3d direction)
Move objects which have been added to the network using
Positioning.Network#addMovableObject . |
void |
ConstraintReference.setHelpPoint(Point3d helpPoint)
License requirements: assemblies ("ASSEMBLIES MODULE") . |
Modifier and Type | Field and Description |
---|---|
Point3d |
ISegment.EndPointsData.endPoint
Location of end 1 in ABS coordinates
|
Point3d |
HealPath.AllData.endPoint |
Point3d |
OffsetPath.OffsetReferenceAxesData.orgin
origin for the offset object
|
Point3d |
SelectStock.ValueData.point
selected object point
|
Point3d |
SelectRun.ValueData.point
selected object point
|
Point3d |
SelectLineSegment.ValueData.point
selected object point
|
Point3d |
SelectISegment.ValueData.point
selected object point
|
Point3d |
SelectControlPoint.ValueData.point
selected object point
|
Point3d |
SelectStock.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectRun.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectLineSegment.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectISegment.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectControlPoint.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectStock.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectRun.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectLineSegment.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectISegment.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectControlPoint.ValueWithSnapData.point2
second selected object point
|
Point3d |
EditBendAngleBuilder.SelectedBendData.rcppos
The position of the bend rcp
|
Point3d |
ISegment.EndPointsData.startPoint
Location of end 0 in ABS coordinates
|
Point3d |
HealPath.AllData.startPoint |
Point3d |
EditLineSegmentBuilder.OrientationData.startPoint
The start
of the line.
|
Modifier and Type | Method and Description |
---|---|
Point3d |
EditLineSegmentBuilder.getActiveRcpPositon()
Determines the active RCP for the line selected by the user.
|
Point3d |
HealPath.getEndPoint()
Get the end point.
|
Point3d |
PlacePartBuilder.getScrewSeatEnd()
Gets the point from builder, used in final placement of screw seat.
|
Point3d |
PlacePartBuilder.getScrewSeatIntersectionPoint()
Gets information about the final screw seat position.
|
Point3d |
HealPath.getStartPoint()
Get the start point.
|
Point3d |
IRoutePosition.position()
Returns the current location of the object in ABS coordinates.
|
Modifier and Type | Method and Description |
---|---|
void |
SplinePathBuilder.addDefiningPointAtAbsoluteCoords(Point3d point)
Adds a defining point to the spline.
|
ControlPoint |
LinearPathBuilder.addPreviewControlPoint(Point3d location)
Add a new control point to the path.
|
SBendCornerCollection.ComputeSBendData |
SBendCornerCollection.computeSBend(Point3d startPnt,
Point3d endPnt,
Vector3d lineVec1,
Vector3d lineVec2,
double radius,
int sbendType)
Compute a S-Bend curve given input.
|
SBendCornerCollection.ComputeSBendData |
SBendCornerCollection.computeSBendData(Point3d startPnt,
Point3d endPnt,
Vector3d lineVec1,
Vector3d lineVec2,
double radius,
int sbendType)
Compute a S-Bend parameters given input.
|
Anchor |
AnchorCollection.createAnchor(Point3d origin)
Creates a
Anchor object. |
Anchor |
AnchorCollection.createAnchor(Point3d position,
Point point)
Creates a
Anchor object. |
void |
GapDisplayBuilder.createBuilder(Line selLine,
Line crossLine,
double gapWidth,
Point3d gapStartPoint,
Point3d gapEndPoint,
boolean bridgeOverGap,
boolean arcOrientation)
Takes selected line, gap start and end points, and gap
type settings in to initialise builder data.
|
OffsetPathCollection.CreateCircularOffsetPathData |
OffsetPathCollection.createCircularOffsetPath(ISegment[] segments,
boolean allStock,
Stock[] specStocks,
boolean maintainStock,
boolean copyBendCorners,
OffsetPathCollection.BendType maintain,
boolean useMinimumBendRatio,
double minimumBendRatio,
double minimumBendRadius,
boolean deleteAllDuplicates,
boolean createAssociativePaths,
Vector3d patternXVector,
Vector3d patternYVector,
Point3d patternAxisEndPoint,
double patternStartAngle,
double radialOffset,
int nPaths,
double totalAngle)
Creates a circular offset path.
|
ControlPointCollection.CreateControlPointData |
ControlPointCollection.createControlPoint(Point3d position,
ControlPointCollection.CheckExisting checkExisting)
Creates a dumb
ControlPoint object. |
PlacePartBuilder |
RouteManager.createPlacePartBuilder(String nodeIdentifier,
int filteredPtbRowIndex,
Point3d placementPos,
TaggedObject placementObj)
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly. |
PlacePartBuilder |
RouteManager.createPlacePartBuilderFS(String nodeIdentifier,
CharacteristicList fileSelectCharx,
Point3d placementPos,
TaggedObject placementObj,
boolean replacePartOp)
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly. |
PlacePartBuilder |
RouteManager.createPlacePartBuilderPTS(TaggedObject ptsPart,
TaggedObject ptsInstance,
Point3d placementPos,
TaggedObject placementObj)
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly. |
OffsetPathCollection.CreateRectangularOffsetPathData |
OffsetPathCollection.createRectangularOffsetPath(ISegment[] segments,
boolean allStock,
Stock[] specStocks,
boolean maintainStock,
boolean copyBendCorners,
OffsetPathCollection.BendType maintain,
boolean useMinimumBendRatio,
double minimumBendRatio,
double minimumBendRadius,
boolean deleteAllDuplicates,
boolean createAssociativePaths,
Vector3d patternXVector,
Vector3d patternYVector,
Point3d patternAxisEndPoint,
double patternStartAngle,
double rowOffset,
double columnOffset,
int nRows,
int nColumns,
int masterRow,
int masterColumn)
Creates a rectangular offset path.
|
PlacePartBuilder |
RouteManager.createRoutingPlacePartBuilder(CharacteristicList partCharx,
Point3d placementPos,
TaggedObject placementObj)
Creates a
PlacePartBuilder that is used to place
a routing part into an assembly. |
SubdivideSegmentBuilder |
RouteManager.createSubdivideSegmentBuilder(NXObject segment,
Point3d pickPoint)
Creates a
SubdivideSegmentBuilder that can
subdivide a segment into multiple segments
License requirements: routing_base ("Routing Basic") Created in NX5.0.0 |
ManualRouteBuilder.CreateValidPointsOnPathsData |
ManualRouteBuilder.createValidPointsOnPaths(Point3d[] pointLocs)
This function will get all the paths stored in
ManualRouteBuilder and
will create point for any location which lies on any of the paths. |
void |
EditPlacePartBuilder.finalizePlacementForScrewSeat(TaggedObject startPointId,
TaggedObject endPointId,
Point3d alignStartPoint,
Point3d alignEndPoint,
Expression length,
Expression angle,
Vector3d alignVector,
TaggedObject screwSeatInstance,
TaggedObject target)
Places a screw measurement holder seat part onto a target object by locating and constraining by the given parameters.
|
ControlPoint |
ControlPointCollection.findControlPoint(Point3d position,
double tolerance)
Finds an existing
ControlPoint at the given ABS coordinates within
the given tolerance. |
void |
PlacementSolutionsBuilder.initializePlacementData(TaggedObject part,
Point3d placementPos,
TaggedObject partToPlace)
Initialize Placement Data
License requirements: routing_base ("Routing Basic") . |
void |
HandrailBuilder.placeHandrail(Point3d postLocation)
Creates a handrail post, horizontal railings assembly components and places them in the appropriate orientation.
|
void |
RouteManager.repositionPartOccurrence(Component partOcc,
Point3d position,
Matrix3x3 transform)
Repositions part component given position and transformation
License requirements: routing_base ("Routing Basic") . |
void |
HealPath.setAllData(Point3d startPoint,
Point3d endPoint,
Vector3d startVector,
Vector3d endVector,
double startParm,
double endParm,
double startExtension,
double endExtension,
boolean reverseStart,
boolean reverseEnd,
HealMethod healMethod,
SplineOptions splineOptions)
Set all the data associated with the heal path creation.
|
void |
GapDisplayBuilder.setBuilderData(Line selLine,
Line crossLine,
double gapWidth,
Point3d gapStartPoint,
Point3d gapEndPoint,
boolean bridgeOverGap,
boolean arcOrientation)
Takes selected line, gap start and end points, and gap
type settings in to set builder data.
|
void |
LinearPathBuilder.setControlPointDefiningObject(ControlPoint previewRcp,
Point3d position,
NXObject object)
Fully defines a preview control point.
|
void |
HealPath.setEndPoint(Point3d endPoint)
Set the end point.
|
void |
ISegment.setEndPoints(Point3d startPoint,
Point3d endPoint)
Set the current location of the segment ends in ABS coordinates.
|
void |
OffsetPath.setOffsetReferenceAxes(Point3d orgin,
Vector3d xVector,
Vector3d yVector)
The reference axes for an offset object.
|
void |
IRoutePosition.setPosition(Point3d position)
Sets the current location of the object in ABS coordinates.
|
void |
PlacePartBuilder.setScrewSeatEnd(Point3d point)
Sets a point in builder, which is required for final placement of screw seat.
|
void |
PlacePartBuilder.setScrewSeatIntersectionPoint(Point3d intersectionPoint)
Sets the final position of screw seat.
|
void |
PlacePartBuilder.setScrewSeatPlacement(TaggedObject startLocation,
TaggedObject endLocation,
Point3d startPoint,
Point3d endPoint,
Expression length,
Expression angle)
Sets the input parameters to be used for measurement holder screw seats.
|
void |
HealPath.setStartPoint(Point3d startPoint)
Set the start point.
|
void |
SelectControlPoint.setValue(ControlPoint selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectISegment.setValue(ISegment selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectLineSegment.setValue(LineSegment selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectRun.setValue(Run selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectStock.setValue(Stock selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectControlPoint.setValueWithSnap(InferSnapType.SnapType snapType,
ControlPoint selection1,
View view1,
Point3d point1,
ControlPoint selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectISegment.setValueWithSnap(InferSnapType.SnapType snapType,
ISegment selection1,
View view1,
Point3d point1,
ISegment selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectLineSegment.setValueWithSnap(InferSnapType.SnapType snapType,
LineSegment selection1,
View view1,
Point3d point1,
LineSegment selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectRun.setValueWithSnap(InferSnapType.SnapType snapType,
Run selection1,
View view1,
Point3d point1,
Run selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectStock.setValueWithSnap(InferSnapType.SnapType snapType,
Stock selection1,
View view1,
Point3d point1,
Stock selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
NXObject[] |
RouteManager.transformObjects(boolean allStock,
Stock[] specifiedStocks,
NXObject[] objects,
Point3d position,
Matrix3x3 transform,
boolean copyOperation)
Transforms routing objects.
|
void |
PlacePartBuilder.updatePlacementObj(TaggedObject placementObj,
Point3d placementPos)
Update the loaded part with a new placement location and object.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
CablewaysLayoutView.ViewMatrixAndOriginData.origin |
Modifier and Type | Method and Description |
---|---|
void |
CablewaysLayoutView.positionLayoutView(Matrix3x3 orientation,
Point3d origin)
Positions the layout view in the 3D space as per input orientation matrix and origin.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
TraverseLoopBuilder.CheckGapData.nearpoint
End point of last selected object near to end point of existing loop string.
|
Point3d |
AddReusableFeatureCollection.InputData.position
Cursor position in create mode
|
Modifier and Type | Method and Description |
---|---|
Point3d |
ReusableObjectPasteBuilder.dynamicCsysOrigin()
Returns the origin of dynamic csys
License requirements: None. |
Point3d |
CreateBoxBuilder.getBoxCsysPosition()
Gets point position of csys for box.
|
Point3d |
AddReusablePart.getInitialPosition()
Gets the initial location, this is mainly used to get default add location of a reusable component
License requirements: None. |
Point3d |
ScrapDesignBuilder.getOvercutPosition()
Returns the overcut position, it determines where the overcut sketch will be constrained
License requirements: None. |
Point3d |
ReusableObjectPasteBuilder.initialPasteLocation()
Returns the initial paste location, this is mainly used to define default paste location of sketch objects
License requirements: None. |
Point3d |
ElectrodeBlankBuilder.referenceCenter()
Returns the blank reference point.
|
Modifier and Type | Method and Description |
---|---|
void |
TraverseLoopBuilder.actEdgeSelection(NXObject[] pTolSelObject,
NXObject[] selections,
NXObject[] deselections,
Point3d cpoint,
boolean selectEndEdge)
Start traverse after selecting edges or curve.
|
void |
AddReusablePart.addHoleInstance(Point3d inputDirection,
Point3d inputPostion)
Adds series of reusable components in holes
License requirements: None. |
NXObject |
FastenerAssy.addTopNode(Point3d point,
Point3d direction,
NXObject selObject,
int index)
Adds top node for the fastener assembly
License requirements: None. |
MWDesignGuideLinesBuilder.CreateGuideLineData |
MWDesignGuideLinesBuilder.createGuideLine(Curve partingLineTag,
Point3d closePoint,
double length)
Create a guide line given a parting line and coordinates close to one of its end points.
|
Curve |
GuidedExtensionBuilder.createGuideLine(Edge assocEdge,
Point3d guideLinePnt,
Vector3d guideLineVector,
double guideLineLength)
Creates a guide line at one of the end points of the sheet edge in the selection.
|
NXObject |
HoleManufacturingNoteBuilder.createHoleIndexLabel(NXObject viewTag,
String holeTypeIndex,
NXObject faceTag,
double holeDiameter,
Point3d holePos,
String holetype,
boolean reverseFlag)
The method to create hole index
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
NXObject |
HoleManufacturingNoteBuilder.createHoleManufacturingNoteAsNote(NXObject viewTag,
String[] holeManufacturingNoteVector,
Point3d point)
The method to create manufaturing information as note
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
TaggedObject |
FormingInsertBuilder.createNewComponent(TaggedObject parentTag,
Point3d origin)
Create new component.
|
TaggedObject |
BurringInsertBuilder.createNewComponent(TaggedObject parentTag,
Point3d origin)
Create new component.
|
NXObject |
AutoDimensionBuilder.createOrdinateOrigin(NXObject viewTag,
Point3d pointData)
The method to create ordinate origin
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
Line |
SectionLineCreationBuilder.createTemporaryLine(Point3d pointData,
Vector3d direction)
Create temporary line
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
WallThicknessCheckerBuilder.createThicknessGraphicObjects(Point3d startPoint,
Vector3d directionVector,
double length,
NXColor color)
Create graphic objects for the thickness results.
|
void |
ReusableObjectPasteBuilder.repositionBody(Point3d target,
Matrix3x3 orient,
boolean twoPickPositionMode)
Moves the body to the selected point and orientation
License requirements: None. |
NXObject |
AddReusablePart.reverseComponentDirection(Point3d inputPosition,
Point3d inputDirection,
double length,
Point3d outputPosition,
Point3d outputDirection)
Reverses the direction of the reusable component if the reusable component is placed on a face.
|
void |
AddReusablePart.reversePreviewComponent(Point3d rememberDir)
Reverses the direction of the reusable component if the reusable component is not placed on a face.
|
void |
CreateBoxBuilder.setBoxColorValue(Point3d value)
Sets box color.
|
void |
CreateBoxBuilder.setBoxCsysPosition(Point3d value)
Sets point position of csys for box.
|
void |
CreateBoxBuilder.setBoxMatrixAndPosition(Matrix3x3 matrix,
Point3d position)
Sets box csys matrix.
|
void |
ReusableObjectPasteBuilder.setDynamicCsysOrigin(Point3d origin)
License requirements: None. |
void |
FastenerAssy.setHoleDirection(Point3d direction,
int index)
Sets the direction for the hole in the fastener assembly
License requirements: None. |
void |
FastenerAssy.setHoleOriginPosition(Point3d originposition,
int index)
Sets the origin position for the hole in the fastener assembly
License requirements: None. |
void |
FastenerAssy.setHolePosition(Point3d position,
int index)
Sets the position for the hole in the fastener assembly
License requirements: None. |
void |
ReusableObjectPasteBuilder.setInitialPasteLocation(Point3d dropLocation)
License requirements: None. |
void |
AddReusablePart.setInitialPosition(Point3d dropLocation)
Sets the initial location, this is mainly used to set default add location of a reusable component
License requirements: None. |
void |
ChannelAdjustBuilder.setManipulatorOriginValue(Point3d moveOrigin)
Sets the manipulator origin.
|
void |
ElectrodeInitializationBuilder.setMsetCsysMatrixOrigin(Matrix3x3 matrix,
Point3d origin)
Sets csys matrix and origin.
|
void |
StandardPartPositionBuilder.setOffsetPosition(Point3d position)
The offset point position.
|
void |
ScrapDesignBuilder.setOvercutPosition(Point3d overcutPosition)
Sets the overcut position, it determines where the overcut sketch will be constrained
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
ElectrodeBlankBuilder.setReferenceCenter(Point3d point)
License requirements: nx_electrode_wizard ("NX Electrode Wizard") . |
void |
TraverseLoopBuilder.setTraverseStartEndPoint(NXObject candidate,
Point3d pointCloseCursor,
NXObject[] selections)
Set start and end points for traversal.
|
void |
FastenerAssy.updateHoleData(int inx,
double originheight,
Point3d originPoint,
boolean threadhole,
boolean blindhole)
Updates the hole data
License requirements: None. |
void |
FastenerAssy.updateHolePostion(int parentIndex,
Point3d dirOne,
Point3d tempPnt,
Point3d pointOne,
double height,
double orignHeight,
double offSetDistance)
Updates the hole positon for position method
License requirements: None. |
Constructor and Description |
---|
InputData(String krxFileInitial,
String libNameInitial,
String libPathInitial,
NXObject entityInitial,
Point3d positionInitial,
nxopen.features.Feature featureInitial)
Constructor for the InputData object.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
UserDefinedObjectDisplayContext.ViewModeData.attentionPoint
The attention point of the geometry just displayed
|
Modifier and Type | Method and Description |
---|---|
void |
UserDefinedObjectDisplayContext.displayAbsoluteRotationScreenSizeStandardText(int fontIndex,
String fontStyle,
Point3d textCoordinates,
UserDefinedObjectDisplayContext.StandardTextRef referencePointType,
String string,
UserDefinedObjectDisplayContext.TextSize textSize)
Displays a single line "Standard Text" string using "Absolute Rotation and Screen
Size Geometry" for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayAbsoluteStandardText(int fontIndex,
String fontStyle,
Point3d textCoordinates,
UserDefinedObjectDisplayContext.StandardTextRef referencePointType,
String string,
double glyphWidth,
double glyphHeight)
Displays a single line "Standard Text" string using "Absolute Geometry" for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayArc(Point3d center,
Matrix3x3 original,
double radius,
double startAngle,
double endAngle)
Displays an arc for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayCircle(Point3d center,
Matrix3x3 original,
double radius,
boolean filled)
Displays a circle for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayFacets(int numVertices,
int numFacets,
Point3d[] vertices,
Vector3d[] normals,
UserDefinedObjectDisplayContext.FacetType typeOfFacet)
Displays a series of facets for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayMultiLineAbsoluteRotationScreenSizeStandardText(int fontIndex,
String fontStyle,
Point3d textCoordinates,
UserDefinedObjectDisplayContext.StandardTextRef referencePointType,
String[] strings,
UserDefinedObjectDisplayContext.TextSize textSize)
Displays a multi-line "Standard Text" string using "Absolute Rotation and Screen
Size Geometry" for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayMultiLineAbsoluteStandardText(int fontIndex,
String fontStyle,
Point3d textCoordinates,
UserDefinedObjectDisplayContext.StandardTextRef referencePointType,
String[] strings,
double glyphWidth,
double glyphHeight)
Displays a multi-line "Standard Text" string using "Absolute Geometry" for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayMultiLineScreenStandardText(int fontIndex,
String fontStyle,
Point3d textCoordinates,
UserDefinedObjectDisplayContext.StandardTextRef referencePointType,
String[] strings,
UserDefinedObjectDisplayContext.TextSize textSize)
Displays a multi-line "Standard Text" string using "Screen Geometry" for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayPoints(Point3d[] points,
UserDefinedObjectDisplayContext.PolyMarker markerType)
Displays a series of points for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayPolygon(Point3d[] points,
boolean filled)
Displays a polygon (a closed set of line segements) for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayPolyline(Point3d[] points)
Displays a polyline (a connected set of line segements) for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayScreenStandardText(int fontIndex,
String fontStyle,
Point3d textCoordinates,
UserDefinedObjectDisplayContext.StandardTextRef referencePointType,
String string,
UserDefinedObjectDisplayContext.TextSize textSize)
Displays a single line "Standard Text" string using "Screen Geometry" for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayText(String text,
Point3d textCoordinates,
UserDefinedObjectDisplayContext.TextRef referencePoint)
Displays a text string using an NX text font for a
UserDefinedObject . |
void |
UserDefinedObjectDisplayContext.displayUnicodeMarker(String unicodeChar,
int fontIndex,
String fontStyle,
Point3d markerCoordinates,
double markerSize)
Displays a single character in the given font and style centered at the given position.
|
Modifier and Type | Field and Description |
---|---|
Point3d |
WeldBeadPathBuilder.UpdatePathData.evaluationpoint
Point that reference vectors are computed at
|
Point3d |
WeldJointBuilder.JointMidPointData.jointMidPoint
The mid point of the joint in absolute coordinates.
|
Point3d |
WeldPointBuilder.CsysData.origin
origin point
|
Point3d |
SelectDatumSurface.ValueData.point
selected object point
|
Point3d |
SelectDatumPin.ValueData.point
selected object point
|
Point3d |
SelectDatumSurface.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectDatumPin.ValueWithSnapData.point1
first selected object point
|
Point3d |
SelectDatumSurface.ValueWithSnapData.point2
second selected object point
|
Point3d |
SelectDatumPin.ValueWithSnapData.point2
second selected object point
|
Modifier and Type | Method and Description |
---|---|
Point3d[] |
WeldPointBuilder.calculateWeldPoints()
To calculate all weld points
License requirements: ugweld ("UG WELD") . |
Point3d |
WeldFillStripBuilder.center()
Returns the center of the fill strip.
|
Point3d |
GrooveBuilder.firstFacesetHelpPoint()
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.seedPoint1() and WeldGrooveBuilder.setSeedPoint1(nxopen.Point3d) instead.
|
Point3d |
GrooveBuilder.secondFacesetHelpPoint()
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.seedPoint2() and WeldGrooveBuilder.setSeedPoint2(nxopen.Point3d) instead.
|
Point3d |
WeldGrooveBuilder.seedPoint1()
Returns the point on the first face
License requirements: ugweld ("UG WELD") . |
Point3d |
FilletBuilder.seedPoint1()
Returns the point on the first face.
|
Point3d |
WeldGrooveBuilder.seedPoint2()
Returns the point on the second face
License requirements: ugweld ("UG WELD") . |
Point3d |
FilletBuilder.seedPoint2()
Returns the point on the second face.
|
Modifier and Type | Method and Description |
---|---|
void |
WeldPointBuilder.createSingleWeldPoint(Point3d pointCoord)
The creation for single weld point
License requirements: ugweld ("UG WELD") . |
void |
DatumSurfaceBuilder.initializeAxis(Point3d approximatePoint)
Update the axis origin to a point specified, and direction to closest principal axis to face normal.
|
void |
WeldPointBuilder.movePoint(Point3d origin)
Move selected points
License requirements: ugweld ("UG WELD") . |
void |
WeldFillStripBuilder.moveToPoint(Point3d newCenter)
Moves the fill strip to the input center.
|
WeldFillStripBuilder |
WeldFillBuilder.newFillStrip(Point3d center,
double length)
Create a new fill strip.
|
void |
GrooveBuilder.setFirstFacesetHelpPoint(Point3d helpPoint)
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.seedPoint1() and WeldGrooveBuilder.setSeedPoint1(nxopen.Point3d) instead.
|
void |
GrooveBuilder.setSecondFacesetHelpPoint(Point3d helpPoint)
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.seedPoint2() and WeldGrooveBuilder.setSeedPoint2(nxopen.Point3d) instead.
|
void |
WeldGrooveBuilder.setSeedPoint1(Point3d seedPoint1)
License requirements: ugweld ("UG WELD") . |
void |
FilletBuilder.setSeedPoint1(Point3d seedPoint1)
License requirements: ugweld ("UG WELD") . |
void |
WeldGrooveBuilder.setSeedPoint2(Point3d seedPoint1)
License requirements: ugweld ("UG WELD") . |
void |
FilletBuilder.setSeedPoint2(Point3d seedPoint1)
License requirements: ugweld ("UG WELD") . |
void |
SelectDatumPin.setValue(DatumPin selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectDatumSurface.setValue(DatumSurface selection,
View view,
Point3d point)
The object being selected with the object's view and object's point
License requirements: None. |
void |
SelectDatumPin.setValueWithSnap(InferSnapType.SnapType snapType,
DatumPin selection1,
View view1,
Point3d point1,
DatumPin selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
SelectDatumSurface.setValueWithSnap(InferSnapType.SnapType snapType,
DatumSurface selection1,
View view1,
Point3d point1,
DatumSurface selection2,
View view2,
Point3d point2)
The object being selected with the objects view and objects point and snap information.
|
void |
WeldPointBuilder.updateCsys(Point3d origin,
Matrix3x3 matrix)
Update coordinate system for selected points
License requirements: ugweld ("UG WELD") . |
Constructor and Description |
---|
JointMidPointData(Point3d jointMidPointInitial,
Vector3d jointTangentInitial,
Vector3d primaryFaceNormalInitial,
Vector3d secondaryFaceNormalInitial,
Vector3d groovePrimaryDirectionInitial,
boolean grooveAlignedWithPrimaryInitial)
Constructor for the JointMidPointData object.
|
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.