nxopen.routing

Interface HealPath

All Superinterfaces:

Remote, TransientObject

public interface HealPath
extends TransientObject

Represents a HealPath object which holds the data used in the creation of the heal path spline.
Created in NX5.0.0

Nested Class Summary

Nested Classes

Modifier and Type	Interface and Description
static class	HealPath.AllData This class holds the data returned from getAllData()

Method Summary

Modifier and Type	Method and Description
HealPath.AllData	getAllData() Get all the data associated with the heal path creation.
double	getEndExtension() Get end extension.
double	getEndParms() Get end parameters.
Point3d	getEndPoint() Get the end point.
Vector3d	getEndVector() Get the end vector.
HealMethod	getHealMethod() Get heal method.
SplineOptions	getSplineOptions() Get spline options (by pole/by points).
double	getStartExtension() Get start extension.
double	getStartParms() Get start parameters.
Point3d	getStartPoint() Get the start point.
Vector3d	getStartVector() Get the start vector.
boolean	reverseEnd() Returns the reverse end end.
boolean	reverseStart() Returns the reverse start end.
void	setAllData(Point3d startPoint, Point3d endPoint, Vector3d startVector, Vector3d endVector, double startParm, double endParm, double startExtension, double endExtension, boolean reverseStart, boolean reverseEnd, HealMethod healMethod, SplineOptions splineOptions) Set all the data associated with the heal path creation.
void	setEndExtension(double endExtension) Set end extension.
void	setEndParms(double endParms) Set end parameters.
void	setEndPoint(Point3d endPoint) Set the end point.
void	setEndVector(Vector3d endVector) Set the end vector.
void	setHealMethod(HealMethod healMethod) Set heal method.
void	setReverseEnd(boolean reverse) Sets the reverse end end.
void	setReverseStart(boolean reverse) Sets the reverse start end.
void	setSplineOptions(SplineOptions splineOptions) Set spline options.
void	setStartExtension(double startExtension) Set start extension.
void	setStartParms(double startParms) Set start parameters.
void	setStartPoint(Point3d startPoint) Set the start point.
void	setStartVector(Vector3d startVector) Set the start vector.

Methods inherited from interface nxopen.TransientObject

_value, dispose, printTestData, printTestData

Method Detail

getStartPoint

Point3d getStartPoint()
               throws NXException,
                      RemoteException

Get the start point. Queries from start object if input is origin.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setStartPoint

void setStartPoint(Point3d startPoint)
            throws NXException,
                   RemoteException

Set the start point.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

startPoint -

Throws:

NXException

RemoteException

getEndPoint

Point3d getEndPoint()
             throws NXException,
                    RemoteException

Get the end point. Queries from end object if input is origin.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setEndPoint

void setEndPoint(Point3d endPoint)
          throws NXException,
                 RemoteException

Set the end point.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

endPoint -

Throws:

NXException

RemoteException

getStartVector

Vector3d getStartVector()
                 throws NXException,
                        RemoteException

Get the start vector. Queries from start object if input is zero vector.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setStartVector

void setStartVector(Vector3d startVector)
             throws NXException,
                    RemoteException

Set the start vector.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

startVector -

Throws:

NXException

RemoteException

getEndVector

Vector3d getEndVector()
               throws NXException,
                      RemoteException

Get the end vector. Queries from end object if input is zero vector.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setEndVector

void setEndVector(Vector3d endVector)
           throws NXException,
                  RemoteException

Set the end vector.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

endVector -

Throws:

NXException

RemoteException

getStartParms

double getStartParms()
              throws NXException,
                     RemoteException

Get start parameters.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setStartParms

void setStartParms(double startParms)
            throws NXException,
                   RemoteException

Set start parameters.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

startParms -

Throws:

NXException

RemoteException

getEndParms

double getEndParms()
            throws NXException,
                   RemoteException

Get end parameters.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setEndParms

void setEndParms(double endParms)
          throws NXException,
                 RemoteException

Set end parameters.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

endParms -

Throws:

NXException

RemoteException

getStartExtension

double getStartExtension()
                  throws NXException,
                         RemoteException

Get start extension.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setStartExtension

void setStartExtension(double startExtension)
                throws NXException,
                       RemoteException

Set start extension.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

startExtension -

Throws:

NXException

RemoteException

getEndExtension

double getEndExtension()
                throws NXException,
                       RemoteException

Get end extension.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setEndExtension

void setEndExtension(double endExtension)
              throws NXException,
                     RemoteException

Set end extension.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

endExtension -

Throws:

NXException

RemoteException

reverseStart

boolean reverseStart()
              throws NXException,
                     RemoteException

Returns the reverse start end. Reverse the direction that the start of the heal path takes when the path is healed.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setReverseStart

void setReverseStart(boolean reverse)
              throws NXException,
                     RemoteException

Sets the reverse start end. Reverse the direction that the start of the heal path takes when the path is healed.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

reverse -

Throws:

NXException

RemoteException

reverseEnd

boolean reverseEnd()
            throws NXException,
                   RemoteException

Returns the reverse end end. Reverse the direction tha tthe end of the heal path takes when the path is healed.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setReverseEnd

void setReverseEnd(boolean reverse)
            throws NXException,
                   RemoteException

Sets the reverse end end. Reverse the direction tha tthe end of the heal path takes when the path is healed.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

reverse -

Throws:

NXException

RemoteException

getHealMethod

HealMethod getHealMethod()
                  throws NXException,
                         RemoteException

Get heal method.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setHealMethod

void setHealMethod(HealMethod healMethod)
            throws NXException,
                   RemoteException

Set heal method.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

healMethod -

Throws:

NXException

RemoteException

getSplineOptions

SplineOptions getSplineOptions()
                        throws NXException,
                               RemoteException

Get spline options (by pole/by points).
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setSplineOptions

void setSplineOptions(SplineOptions splineOptions)
               throws NXException,
                      RemoteException

Set spline options.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

splineOptions -

Throws:

NXException

RemoteException

getAllData

HealPath.AllData getAllData()
                     throws NXException,
                            RemoteException

Get all the data associated with the heal path creation.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Throws:

NXException

RemoteException

setAllData

void setAllData(Point3d startPoint,
                Point3d endPoint,
                Vector3d startVector,
                Vector3d endVector,
                double startParm,
                double endParm,
                double startExtension,
                double endExtension,
                boolean reverseStart,
                boolean reverseEnd,
                HealMethod healMethod,
                SplineOptions splineOptions)
         throws NXException,
                RemoteException

Set all the data associated with the heal path creation.
License requirements: routing_base ("Routing Basic")

Created in NX5.0.0

Parameters:

startPoint -

endPoint -

startVector -

endVector -

startParm -

endParm -

startExtension -

endExtension -

reverseStart -

reverseEnd -

healMethod -

splineOptions -

Throws:

NXException

RemoteException