Package | Description |
---|---|
nxopen |
Provides classes and interfaces for the NX Open Common API.
|
nxopen.bodydes |
Provides classes and interfaces for Body Design.
|
nxopen.cam |
Provides classes and interfaces for Manufacturing.
|
nxopen.die |
Provides classes and interfaces relating to Die Engineering and Die Design.
|
nxopen.drawings |
Provides classes and interfaces for Drafting Drawings.
|
nxopen.facet |
Provides classes and interfaces for Faceted Representations.
|
nxopen.features |
Provides classes and interfaces for features.
|
nxopen.features.sheetmetal |
Provides classes and interfaces for Sheet Metal Features.
|
nxopen.features.shipdesign |
Provides classes and interfaces for Ship Design.
|
nxopen.features.vehicledesign |
Provides classes and interfaces for the Vehicle Design.
|
nxopen.geometricanalysis |
Provides classes and interfaces for Geometric Analysis.
|
nxopen.geometricutilities |
Provides classes and interfaces for Geometric Utilities.
|
nxopen.routing |
Provides classes and interfaces for Routing.
|
nxopen.tooling |
Provides classes and interfaces for Tooling.
|
nxopen.weld |
Provides classes and interfaces for Weld.
|
Modifier and Type | Method and Description |
---|---|
Section |
Section.cloneSection()
Clone section.
|
Section |
SketchOffsetBuilder.createSection()
The function creates a new empty section object and adds it to the builder
License requirements: None. |
Section |
SketchAssociativeTrimBuilder.createSection()
The function creates a new empty section object and adds it to the builder
License requirements: None. |
Section |
SectionCollection.createSection()
Creates a section using default values for chaining, distance, and angle tolerance.
|
Section |
SectionCollection.createSection(double chainingTolerance,
double distanceTolerance,
double angleTolerance)
Creates a section.
|
Section |
SectionCollection.createSection(NXObject curve)
Creates a section with Single Curve rule using the given curve, edge or point.
|
Section[] |
SectionCollection.createSectionsUsingCurves(NXObject[] curves,
SectionCollection.LoopOption loopOption,
double chainingTolerance,
double distanceTolerance,
double angleTolerance)
Creates sections using curves such that each section can be extruded to produce one body.
|
Section |
SectionList.findItem(int index)
Returns the object at the input index.
|
Section[] |
SectionList.getContents()
Gets the contents of the entire list
License requirements: None. |
Section[] |
SketchOffsetBuilder.getSections()
This function gets all sections of an offset during create/edit
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT") . |
Section[] |
SketchAssociativeTrimBuilder.getSections()
This function gets all sections of the trim constraint during create/edit
License requirements: solid_modeling ("SOLIDS MODELING") . |
Section |
SketchIntersectionPointBuilder.rail()
Returns the rail
License requirements: None. |
Section |
SketchProjectBuilder.section()
Returns the section.
|
Section |
SketchPatternBuilder.section()
Returns the pattern section
License requirements: None. |
Section |
SketchMirrorPatternBuilder.section()
Returns the pattern section
License requirements: None. |
Section |
SketchEvaluator.section()
Returns the master section.
|
Section |
SketchAlongPathBuilder.section()
Returns the path
License requirements: None. |
Section |
ExpressionSectionSet.section()
Returns the section
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
SectionList.append(Section object)
Appends an object to the list
License requirements: None. |
void |
SectionList.append(Section[] objects)
Appends a set of objects to the list
License requirements: None. |
ExpressionSectionSet |
Part.createExpressionSectionSet(Section section,
String value,
String unitsType,
int index)
Creates an ExpressionSectionSet item that contains a
Section collection
and a corresponding expression
License requirements: None. |
Curve |
CurveCollection.createSmartCompositeCurve(Section section,
SmartObject.UpdateOption updateOption,
double tolerance)
Creates a
Curve . |
TwoExpressionsSectionSet |
Part.createTwoExpressionsSectionSet(Section section,
String value,
String valueTwo,
String unitsType,
int index)
Creates an TwoExpressionSectionSet item that contains
a
Section section
and two corresponding expressions
License requirements: None. |
void |
SectionList.erase(Section obj)
Erases the object from the list, but does not delete the object.
|
void |
SectionList.erase(Section obj,
ObjectList.DeleteOption deleteOption)
Erases the object from the list.
|
int |
SectionList.findIndex(Section obj)
Finds the index where the input object appears.
|
void |
SectionList.insert(int location,
Section object)
Inserts an object at the specified location
License requirements: None. |
void |
SketchOffsetBuilder.removeSection(Section section)
The function removes the given section from the builder
License requirements: None. |
void |
SketchAssociativeTrimBuilder.removeSection(Section section)
The function removes the given section from the builder
License requirements: None. |
void |
SectionList.setContents(Section[] objects)
Sets the contents of the entire list.
|
void |
SketchEvaluator.setSection(Section section)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
ExpressionSectionSet.setSection(Section sectionTg)
License requirements: None. |
void |
SectionList.swap(Section object1,
Section object2)
Exchanges the position of two objects inside the list.
|
Modifier and Type | Method and Description |
---|---|
Section |
OnestepUnformBuilder.unformSection()
Returns the unform section which includes a group of user selected points or curves.
|
Modifier and Type | Method and Description |
---|---|
void |
OnestepUnformBuilder.setUnformSection(Section unformsection)
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR ug_body_design ("Body Design") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") . |
Modifier and Type | Method and Description |
---|---|
Section |
DriveChainItemBuilder.curveItem()
Returns the curve item
License requirements: cam_base ("CAM BASE") . |
Section |
LaserCutoutDefinition.cutoutSection()
Returns the Cutout Section
License requirements: None. |
Section |
FollowCurveMoveBuilder.geometry()
Returns the geometry selection
License requirements: None. |
Section |
LaserProfileMove.profileSection()
Returns the Profile Section
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
DriveChainItemBuilder |
DmCurveBuilder.createDpmcvDriveCurve(Section section)
Create a Drive Curve
License requirements: cam_base ("CAM BASE") . |
void |
DriveChainItemBuilder.setCurveItem(Section section)
License requirements: cam_base ("CAM BASE") . |
void |
LaserCutoutDefinition.setCutoutSection(Section cutoutSection)
License requirements: cam_base ("CAM BASE") . |
void |
FollowCurveMoveBuilder.setGeometry(Section geometryCollector)
License requirements: cam_base ("CAM BASE") . |
void |
LaserProfileMove.setProfileSection(Section profileSection)
License requirements: cam_base ("CAM BASE") . |
Modifier and Type | Method and Description |
---|---|
Section |
KeywayBuilder.baseFlange()
Returns the closed loop section representing the base flange
License requirements: None. |
Section |
DieShoeBuilder.baseFlangeSection()
Returns the base flange section
License requirements: None. |
Section |
FillAreaBuilder.boundary()
Returns the closed boundary profile that defines the fill area.
|
Section |
AddendumSectionBuilder.byCurves()
Returns the curves used to approximate an addendum section.
|
Section |
DrawBeadBuilder.centerline()
Returns the section containing the centerline of the bead.
|
Section |
TrimLineDevelopmentBuilder.constraintCurveFromTargetRegion()
Returns the collection of constraint curve from target region
License requirements: None. |
Section |
TrimLineDevelopmentBuilder.constraintCurveFromUnformRegion()
Returns the collection of constraint curve from unform region
License requirements: None. |
Section |
AddendumSectionBuilder.createExtendSection()
Creates a
Section object containing the extended constraint curve. |
Section |
CompensateRoughDataBuilder.curveCollector()
Returns the curve collector containing the curves that will be approximated.
|
Section |
UncutRegionsBuilder.curves()
Returns the curves to check for uncut regions.
|
Section |
DieShoeBuilder.deckCutoutsSection()
Returns the cutout sections in the main deck
License requirements: None. |
Section |
AddendumSectionBuilder.deleteExtendSection()
Deletes the
Section used for extended constraint curve. |
Section |
ClampingSlotBuilder.flangeBaseProfile()
Returns the closed profile of the flange base
License requirements: None. |
Section |
SpringbackCompensationBuilder.innerCurve()
Returns the inner boundary curve of the transition area.
|
Section |
MachineReliefBuilder.insideWallProfile()
Returns the wall profile defining the inside of the main wall used for the cam definition.
|
Section |
KeywayBuilder.interiorProfile()
Returns the closed loop section representing the interior profile of the casting
License requirements: None. |
Section |
DieShoeBuilder.mainDeckSection()
Returns the main deck section
License requirements: None. |
Section |
MachineReliefBuilder.mainProfile()
Returns the primary profile for the machine relief casting.
|
Section |
AddendumSectionBuilder.neutralCurve()
Returns the neutral curve.
|
Section |
SpringbackCompensationBuilder.outerCurve()
Returns the outer boundary curve of transition area.
|
Section |
CastReliefBuilder.reliefProfile()
Returns the closed profiles used for determining the relief
License requirements: None. |
Section |
FingerClearanceNotchBuilder.section()
Returns the open section constructed from curves, edges, or a sketch.
|
Section |
ClearanceBuilder.section()
Returns the closed profile sections to use for the basis of the clearance area.
|
Section |
AddendumSectionUserDefinedBuilder.section()
Returns the objects defining the section, either a previously defined section or a string of objects defining the section shape.
|
Modifier and Type | Method and Description |
---|---|
void |
AddendumSectionBuilder.trimExtendConstraintCurve(Section constraintCurve)
Trims or extends constraint curve.
|
Modifier and Type | Method and Description |
---|---|
Section |
ViewProjectionBuilder.curvePoints()
Returns the curve and points
License requirements: None. |
Section |
SketchSectionLineBuilder.sketchSection()
Returns the sketch section
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Section |
ExtrudeProfileBuilder.profile()
Returns the 3D profile to be extruded
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Section |
SectionSurfaceBuilderEx.apexCurve()
Returns the apex curve.
|
Section |
SectionSurfaceBuilder.apexCurve()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
GlobalShapingBuilder.baseCurve()
Returns the base curve
License requirements: None. |
Section |
SilhouetteFlangeBuilder.baseCurves()
Returns the base curves.
|
Section |
LawExtensionBuilderEx.baseProfile()
Returns the base profile
License requirements: None. |
Section |
LawExtensionBuilder.baseProfile()
Returns the base profile
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") . |
Section |
GlobalShapingBuilder.bendCurve()
Returns the bend curve
License requirements: None. |
Section |
OvercrownBuilder.boundarySection()
Returns the boundary section.
|
Section |
BoundedPlaneBuilder.boundingCurves()
Returns the bounding curves
License requirements: None. |
Section |
StyledBlendBuilder.centerCurve()
Returns the center curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
OffsetEmbossBuilder.centerLine()
Returns the center line:
An existing curve/path on the sheet that defines the full extent of the offset feature required.
|
Section |
AOCSBuilder.cloneSection(boolean constToVariable,
Section sectionFrom)
Clone section.
|
Section |
PartGeometryCopySelectBuilder.compositeCurve()
Returns the composite curve
License requirements: None. |
Section |
GlobalShapingBuilder.controlCurve()
Returns the curve control
License requirements: None. |
Section |
ThroughCurveMeshBuilder.crossTemplateString()
Returns the cross template curve.
|
Section |
MirrorCurveBuilder.curve()
Returns the curves to mirror
License requirements: None. |
Section |
GlobalShapingCurveOffsetBuilder.curve()
Returns the target curve
License requirements: None. |
Section |
CombinedProjectionBuilder.curve1()
Returns the combined projection curve1
License requirements: None. |
Section |
CombinedProjectionBuilder.curve2()
Returns the combined projection curve2
License requirements: None. |
Section |
FillHoleBuilder.curveChain()
Returns the curve chain
License requirements: None. |
Section |
SectionInertiaAnalysisBuilder.curveCollector()
Returns the curve collector
License requirements: None. |
Section |
WrapBuilder.curves()
Returns the curves that are being wrapped or unwrapped.
|
Section |
OffsetCurveBuilder.curvesToOffset()
Returns the curves to offset
License requirements: None. |
Section |
TrimCurveBuilder.curvesToTrim()
Returns the curves to trim
License requirements: None. |
Section |
SectionSurfaceBuilder.endGuide()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilderEx.endHighlightCurve()
Returns the end highlight curve.
|
Section |
SectionSurfaceBuilder.endHighlightSection()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
PointSetBuilder.endPercentageSection()
Returns a section containing an object (curve, edge, or point) that will be used to
determine an intersection with the
curves/edges selected for setting the EndPercentage
Only used when type is
PointSetBuilder.Types.CURVE_POINTS ,
and when PointSetBuilder.curvePointsBy() is
PointSetBuilder.CurvePointsType.EQUAL_ARC_LENGTH ,
PointSetBuilder.CurvePointsType.EQUAL_PARAMETERS , or
PointSetBuilder.CurvePointsType.GEOMETRIC_PROGRESSION . |
Section |
BridgeCurveBuilderEx.endSection()
Returns the end section
License requirements: None. |
Section |
SectionSurfaceBuilderEx.endShapeCurve()
Returns the end shape curve.
|
Section |
SectionSurfaceBuilder.endShapeCurve()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilder.endSlope()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilderEx.endSlopeCurve()
Returns the end slope curve.
|
Section |
CircularBlendCurveBuilder.firstCurve()
Returns the first curve chain
License requirements: None. |
Section |
StyledSweepBuilder.firstGuide()
Returns the first guide
License requirements: None. |
Section |
GlobalShapingBuilder.firstRegionLimitCurve()
Returns the first region limit curve
License requirements: None. |
Section |
RuledBuilder.firstSection()
Returns the first section
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling") . |
Section |
GeodesicFilletBuilder.firstSection()
Returns the first section of curves to fillet
License requirements: None. |
Section |
GeodesicChamferBuilder.firstSection()
Returns the first section of curves to chamfer
License requirements: None. |
Section |
SweepAlongGuideBuilder.guide()
Returns the guide
License requirements: None. |
Section |
HolePackageBuilder.holePosition()
Returns the hole position
License requirements: None. |
Section |
SectionSurfaceBuilder.interiorGuide1()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilder.interiorGuide2()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilder.interiorGuide3()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
GeodesicIntersectBuilder.intersectCurves()
Returns the curves to intersect sketch face
License requirements: None. |
Section |
PointSetBuilder.intersectionSection()
Deprecated.
Deprecated in NX9.0.0. Please use
PointSetBuilder.intersectionSelectedObjectsSecond() instead.
|
Section |
AOCSBuilder.lawString()
Returns the law string
License requirements: solid_modeling ("SOLIDS MODELING") . |
Section |
ShelfBuilder.limitCurve1()
Returns the limit curve1
License requirements: None. |
Section |
ShelfBuilder.limitCurve2()
Returns the limit curve2
License requirements: None. |
Section |
PointSetBuilder.multipleCurveOrEdgeCollector()
Returns the collector that is used to hold multiple curves or edges.
|
Section |
Offset3DCurveBuilder.offsetCurves()
Returns the curves to offset.
|
Section |
GeodesicOffsetBuilder.offsetCurves()
Returns the curves to offset
License requirements: None. |
Section |
TextBuilder.onCurvePlacementProfile()
Returns the placement profile for
TextBuilder.Types.ON_CURVE type
License requirements: None. |
Section |
TextBuilder.onFacePlacementProfile()
Returns the placement profile for
TextBuilder.Types.ON_FACE type
License requirements: None. |
Section |
SectionSurfaceBuilder.orientationGuide()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
NSidedSurfaceBuilder.outerLoop()
Returns the outer loop
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling") . |
Section |
AestheticFaceBlendBuilder.parameterSpine()
Returns the parameter spine
License requirements: None. |
Section |
GeomcopyBuilder.path()
Returns the section path for along path type of instancing.
|
Section |
SectionInertiaAnalysisBuilder.pathCollector()
Returns the path collector
License requirements: None. |
Section |
TubeBuilder.pathSection()
Returns the path section
License requirements: None. |
Section |
ThroughCurveMeshBuilder.primaryTemplateString()
Returns the primary template curve.
|
Section |
RibbonBuilder.profile()
Returns the profile to offset
License requirements: None. |
Section |
StyledBlendBuilder.profileCurve()
Returns the profile curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
GeodesicProjectBuilder.projectCurves()
Returns the curves to project
License requirements: None. |
Section |
GlobalShapingBuilder.regionLimitCurve()
Returns the region limit curve
License requirements: None. |
Section |
GlobalShapingBuilder.regionToDeform()
Returns the region to deform
License requirements: None. |
Section |
ThickenBuilder.regionToPierce()
Returns the section for regions to pierce
The section associated for the Thicken feature
License requirements: None. |
Section |
GlobalShapingBuilder.rotationTargetCurve()
Returns the rotation target curve
License requirements: None. |
Section |
StyledSweepBuilder.scalingCurve()
Returns the scaling curve
License requirements: None. |
Section |
CircularBlendCurveBuilder.secondCurve()
Returns the second curve chain
License requirements: None. |
Section |
StyledSweepBuilder.secondGuide()
Returns the second guide
License requirements: None. |
Section |
GlobalShapingBuilder.secondRegionLimitCurve()
Returns the second region limit curve
License requirements: None. |
Section |
RuledBuilder.secondSection()
Returns the second section
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling") . |
Section |
GeodesicFilletBuilder.secondSection()
Returns the second section of curves to fillet
License requirements: None. |
Section |
GeodesicChamferBuilder.secondSection()
Returns the second section of curves to chamfer
License requirements: None. |
Section |
VarsweepBuilder.section()
Returns the master section.
|
Section |
SweepAlongGuideBuilder.section()
Returns the section
License requirements: None. |
Section |
RibBuilder.section()
Returns the input section
License requirements: None. |
Section |
RevolveBuilder.section()
Returns the section
License requirements: None. |
Section |
JoinCurvesBuilder.section()
Returns the section that collects the input curves that are to be joined.
|
Section |
ExtrudeBuilder.section()
Returns the section
License requirements: None. |
Section |
EmbossRegion.section()
Returns the section that is composed of chains
License requirements: None. |
Section |
DatumAxisBuilder.section()
Returns the section.
|
Section |
CurveLengthBuilder.section()
Returns the section
License requirements: solid_modeling ("SOLIDS MODELING") . |
Section |
CompositeCurveBuilder.section()
Returns the section
License requirements: None. |
Section |
AeroRibBuilder.section()
Returns the section
License requirements: None. |
Section |
AeroFlangeBuilder.section()
Returns the section
License requirements: None. |
Section |
SectionSurfaceBuilderEx.sectionEndGuide()
Returns the section end guide.
|
Section |
SectionSurfaceBuilderEx.sectionInteriorGuide1()
Returns the interior guide1.
|
Section |
SectionSurfaceBuilderEx.sectionInteriorGuide2()
Returns the section interior guide2.
|
Section |
SectionSurfaceBuilderEx.sectionInteriorGuide3()
Returns the section interior guide3.
|
Section |
SectionSurfaceBuilderEx.sectionOrientationGuide()
Returns the section orientation guide.
|
Section |
SectionSurfaceBuilderEx.sectionStartGuide()
Returns the section start guide.
|
Section |
ThroughCurvesBuilder.sectionTemplateString()
Returns the section template curve.
|
Section |
ProjectCurveBuilder.sectionToProject()
Returns the section to project
License requirements: None. |
Section |
StepBuilder.selectBoundarySection1()
Returns the selected boundary section 1
License requirements: None. |
Section |
StepBuilder.selectBoundarySection2()
Returns the selected boundary section2
License requirements: None. |
Section |
FillHoleBuilder.selectPassThrougCurves()
Returns the pass through curves
License requirements: None. |
Section |
GuidedExtensionBuilderEx.sheetEdges()
Returns the sheet edges of a sheet body
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard") . |
Section |
SectionSurfaceBuilder.shoulder()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilderEx.shoulderCurve()
Returns the shoulder curve.
|
Section |
PointSetBuilder.singleCurveOrEdgeCollector()
Returns the collector that is used to hold a single curve or edge definition.
|
Section |
SnipSurfaceBuilder.snippingCurve()
Returns the snipping curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
ThroughCurveMeshBuilder.spine()
Returns the spine.
|
Section |
SweptBuilder.spine()
Returns the spine (optional).
|
Section |
LawExtensionBuilder.spine()
Returns the spine.
|
Section |
HelixBuilder.spine()
Returns the length spine
License requirements: None. |
Section |
FaceBlendBuilder.spine()
Returns the spine for face blend
License requirements: None. |
Section |
StyledBlendBuilder.spineCurve()
Returns the spine curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
SectionSurfaceBuilder.spineCurve()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
NSidedSurfaceBuilder.spineCurve()
Returns the spine curve.
|
Section |
SectionSurfaceBuilderEx.spineSection()
Returns the spine section.
|
Section |
SectionSurfaceBuilder.startGuide()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilderEx.startHighlightCurve()
Returns the start highlight curve.
|
Section |
SectionSurfaceBuilder.startHighlightSection()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
PointSetBuilder.startPercentageSection()
Returns a section containing an object (curve, edge, or point) that will be used to
determine an intersection with the
curves/edges selected for setting the StartPercentage
Only used when type is
PointSetBuilder.Types.CURVE_POINTS ,
and when PointSetBuilder.curvePointsBy() is
PointSetBuilder.CurvePointsType.EQUAL_ARC_LENGTH ,
PointSetBuilder.CurvePointsType.EQUAL_PARAMETERS , or
PointSetBuilder.CurvePointsType.GEOMETRIC_PROGRESSION . |
Section |
BridgeCurveBuilderEx.startSection()
Returns the start section
License requirements: None. |
Section |
SectionSurfaceBuilderEx.startShapeCurve()
Returns the start shape curve.
|
Section |
SectionSurfaceBuilder.startShapeCurve()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilder.startSlope()
Deprecated.
Deprecated in NX9.0.0. Use
SectionSurfaceBuilderEx instead.
|
Section |
SectionSurfaceBuilderEx.startSlopeCurve()
Returns the start slope curve.
|
Section |
StyledBlendBuilder.tangentCurve1()
Returns the first tangent curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
StyledBlendBuilder.tangentCurve2()
Returns the second tangent curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
GlobalShapingBuilder.targetCurve()
Returns the target curve
License requirements: None. |
Section |
SweptVolumeBuilder.toolPath()
Returns the tool path
License requirements: None. |
Section |
MeshTransformerBuilder.transformCurves()
Returns the curves to be transformed
License requirements: None. |
Section |
FreeTransformerBuilder.transformCurves()
Returns the curves to be transformed
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
MeshSurfaceBuilder.buildProfileFromSections(boolean conehead,
MeshProfileString.Type profileStringType,
MeshParameterData.FeatureType skinType,
MeshProfileString.SelectedPoint stringPointType,
Section[] sections,
boolean editInsertProfile,
MeshProfileString profile)
Creates mesh surface profile string.
|
Section |
AOCSBuilder.cloneSection(boolean constToVariable,
Section sectionFrom)
Clone section.
|
void |
DatumAxisBuilder.evaluatePath(Section section)
Evaluate the path.
|
void |
AOCSBuilder.flipAllOffsetsOfSection(Section section)
Reverse the direction of all offsets of the section.
|
void |
OvercrownBuilder.setBoundarySection(Section section)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GlobalShapingCurveOffsetBuilder.setCurve(Section curve)
License requirements: None. |
void |
RuledBuilder.setFirstSection(Section section)
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling") . |
void |
GeodesicFilletBuilder.setFirstSection(Section firstSection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeodesicChamferBuilder.setFirstSection(Section firstSection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
AOCSBuilder.setLawString(Section lawString)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
Offset3DCurveBuilder.setOffsetCurves(Section offsetCurves)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeomcopyBuilder.setPath(Section path)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GlobalShapingBuilder.setRegionToDeform(Section regionToDeform)
License requirements: None. |
void |
RuledBuilder.setSecondSection(Section section)
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling") . |
void |
GeodesicFilletBuilder.setSecondSection(Section secondSection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
GeodesicChamferBuilder.setSecondSection(Section secondSection)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
VarsweepBuilder.setSection(Section section)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
RevolveBuilder.setSection(Section section)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
ExtrudeBuilder.setSection(Section section)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
EmbossRegion.setSection(Section section)
Sets the section that is composed of chains
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
CurveLengthBuilder.setSection(Section section)
Sets the section
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
ThroughCurvesBuilder.setSectionTemplateString(Section sectionTemplate)
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling") . |
void |
FaceBlendBuilder.setSpine(Section spine)
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
AOCSBuilder.synchronizeSections(boolean constToVariable,
Section firstSection,
Section secondSection)
Synchronize the second section data consistent to the first one
License requirements: solid_modeling ("SOLIDS MODELING") . |
boolean |
AOCSBuilder.updateSectionData(Section section)
Update section data for offset
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Method and Description |
---|---|
Section |
UnbendBuilder.addedGeometry()
Returns the added geometry selection
License requirements: None. |
Section |
FlatSolidBuilder.addedGeometry()
Returns the added geometry selection
License requirements: None. |
Section |
FlatPatternBuilder.addedGeometry()
Returns the added geometry selection
License requirements: None. |
Section |
AeroLighteningCutoutBuilder.cutoutProfile()
Returns the cutout profile
License requirements: None. |
Section |
ContourFlangeBuilder.edgeChain()
Returns the section having chain edges.
|
Section |
LoftedFlangeBuilder.endSection()
Returns the end section of the lofted flange.The section profile should be open looped.
|
Section |
ConvertToSheetmetalBuilder.ripSection()
Returns the section containing curves that need to be ripped while converting to sheetmetal.
|
Section |
TabBuilder.section()
Returns the section of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
Section |
NormalCutoutBuilder.section()
Returns the section used by the normal cutout.
|
Section |
LouverBuilder.section()
Returns the section used by the louver.
|
Section |
JogBuilder.section()
Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
Section |
GussetBuilder.section()
Returns the section
This section object contains a planar set of connected curves that will be used to create a Gusset of type GussetBuilder.Types.USER_DEFINED_PROFILE . |
Section |
EdgeRipBuilder.section()
Returns the section used by Edge Rip
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
Section |
DrawnCutoutBuilder.section()
Returns the Section used by the Drawn Cutout.
|
Section |
DimpleBuilder.section()
Returns the Section used by the Dimple.
|
Section |
ContourFlangeBuilder.section()
Returns the section of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
Section |
BendBuilder.section()
Returns the Section
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
Section |
BeadBuilder.section()
Returns the Section used by the bead. section should be open.
|
Section |
LoftedFlangeBuilder.startSection()
Returns the start section of the lofted flange.
|
Modifier and Type | Method and Description |
---|---|
void |
UnbendBuilder.setAddedGeometry(Section addedGeometry)
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
void |
ContourFlangeBuilder.setEdgeChain(Section edgeChain)
Sets the section having chain edges.
|
void |
LoftedFlangeBuilder.setEndSection(Section endSection)
Sets the end section of the lofted flange.The section profile should be open looped.
|
void |
ConvertToSheetmetalBuilder.setRipSection(Section section)
Sets the section containing curves that need to be ripped while converting to sheetmetal.
|
void |
TabBuilder.setSection(Section section)
Sets the section of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
void |
NormalCutoutBuilder.setSection(Section section)
Sets the section used by the normal cutout.
|
void |
LouverBuilder.setSection(Section section)
Sets the section used by the louver.
|
void |
JogBuilder.setSection(Section section)
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
void |
EdgeRipBuilder.setSection(Section section)
Sets the section used by Edge Rip
License requirements: nx_sheet_metal ("NX Sheet Metal") . |
void |
DrawnCutoutBuilder.setSection(Section section)
Sets the Section used by the Drawn Cutout.
|
void |
DimpleBuilder.setSection(Section section)
Sets the Section used by the Dimple.
|
void |
ContourFlangeBuilder.setSection(Section section)
Sets the section of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
void |
BendBuilder.setSection(Section section)
Sets the Section
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") . |
void |
BeadBuilder.setSection(Section section)
Sets the Section used by the bead. section should be open.
|
void |
LoftedFlangeBuilder.setStartSection(Section startSection)
Sets the start section of the lofted flange.
|
Modifier and Type | Method and Description |
---|---|
Section |
PlateSystemBuilder.boundarySection()
Returns the section containing curves that define the boundary of the plate system.
|
Section |
PlateBuilder.curveBoundary()
Returns the curve boundary, which can be a single region or multiple regions.
|
Section |
StiffenerSystemBuilder.curves()
Returns the curves selected that define the path of the stiffener system.
|
Section |
ShellExpansionBuilder.curvesToMap()
Returns the curves to map
License requirements: None. |
Section |
SeamBuilder.definitionCurves()
Returns the curves selected or sketched that will be projected onto the ship structure to create the seam.
|
Section |
SeamBuilder.definitionEquallySpacedCurve1()
Returns the first curve that will be used as a boundary for the equally spaced seams.
|
Section |
SeamBuilder.definitionEquallySpacedCurve2()
Returns the second curve that will be used as a boundary for the equally spaced seams.
|
Section |
EdgeReinforcementBuilder.edges()
Returns the edges to reinforce.
|
Section |
TraceLinesBuilder.endCurve()
Returns the end curve
License requirements: None. |
Section |
EdgeCutBuilder.guideCurve()
Returns the guide curve used to place the cuts (may be made up of edges or curves).
|
Section |
ProfileBuilder.guideSection()
Returns the select edge
License requirements: None. |
Section |
ManufacturingOutBuilder.markOnlySection()
Returns the mark only section
License requirements: None. |
Section |
LongitudinalBulkheadBuilder.moldFaceSection()
Returns the section containing the shape to extrude.
|
Section |
TraceLinesBuilder.referenceCurve()
Returns the reference curve
License requirements: None. |
Section |
VentilationHoles2Builder.sectionGuide()
Returns the section guide
License requirements: None. |
Section |
SteelVentHolesBuilder.sectionGuide()
Returns the section guide - vent holes are placed along this guide
License requirements: None. |
Section |
PenetrationRequestBuilder.sketch()
Returns the sketch
License requirements: None. |
Section |
PenetrationCutoutBuilder.sketch()
Returns the sketch
License requirements: None. |
Section |
PenetrationAssociationBuilder.sketchSection()
Returns the sketch
License requirements: None. |
Section |
TraceLinesBuilder.startCurve()
Returns the start curve
License requirements: None. |
Section |
SplitStandardPartBuilder.toolCurve()
Returns the tool curve which used to split the standard part.
|
Modifier and Type | Method and Description |
---|---|
void |
PenetrationAssociationBuilder.setSketchSection(Section sectionSketch)
License requirements: nx_penetration_mgmt ("Penetration Management") . |
Modifier and Type | Method and Description |
---|---|
Section |
MirrorCertificationBuilder.bezelCurve()
Returns the bezel curve representing the inside perimeter of the closed protective cover (or shell) around a mirror and must be a closed loop of curves.
|
Section |
CloseRangeVisibilityBuilder.mirrorBoundary()
Returns the curves selection used to identify the mirror boundary section.
|
Section |
ReflectionDataBuilder.targetObject()
Returns the target object to be reflected on the faces and/or planes
the target object
License requirements: None. |
Section |
PedestrianProtectionBuilder.upperLegPositions()
Returns the upper leg impact locations.
|
Section |
AllAroundVisionBuilder.windowCurveGeometry()
Returns the curves representing the window geometry to use as non-obstructing elements.
|
Modifier and Type | Method and Description |
---|---|
Section |
GapFlushnessBuilder.basePanelInnerContactCurves()
Returns the Base Panel inner contact section
License requirements: solid_modeling ("SOLIDS MODELING") . |
Section |
GapFlushnessBuilder.basePanelOuterContactCurves()
Returns the Base Panel outer contact section
License requirements: solid_modeling ("SOLIDS MODELING") . |
Section |
GapFlushnessBuilder.crossSectionCurves()
Returns the Cross Section Curves
License requirements: solid_modeling ("SOLIDS MODELING") . |
Section |
GapFlushnessBuilder.secondPanelInnerContactCurves()
Returns the Second Panel inner contact section
License requirements: solid_modeling ("SOLIDS MODELING") . |
Section |
GapFlushnessBuilder.secondPanelOuterContactCurves()
Returns the Second Panel outer contact section
License requirements: solid_modeling ("SOLIDS MODELING") . |
Modifier and Type | Method and Description |
---|---|
Section |
AlignmentMethodBuilder.alignCurve()
Returns the align curve
License requirements: None. |
Section |
SelectDividingObjectBuilder.curvesToOffset()
Returns the curves to offset
License requirements: None. |
Section |
PatternFill.faceBoundary()
Returns the face boundary
License requirements: None. |
Section |
AlongSpineBuilder.featureSpine()
Returns the Spine set by the owning feature of the law
License requirements: None. |
Section |
PatternFill.fillBoundary()
Returns the fill boundary
License requirements: None. |
Section |
FtmFixedCurvesBuilder.fixedCurves()
Returns the fixed curves that define the fixed constraints on the product shape
License requirements: None. |
Section |
SpinePointData.getParentSpine()
Returns the parent spine on which spine point is defined
License requirements: None. |
Section |
PatternFill.internalBoundary()
Returns the fill boundary
License requirements: None. |
Section |
LawBuilder.lawCurve()
Returns the law curve.
|
Section |
OrientationMethodBuilder.orientationCurve()
Returns the orientation curve.
|
Section |
StyledSweepReferenceMethodBuilder.referenceCurve()
Returns the section orientation reference curve.
|
Section |
ScalingMethodBuilder.scalingCurve()
Returns the scaling curve.
|
Section |
SpineDefinitionBuilder.section()
Returns the section
License requirements: None. |
Section |
SShapedLawBuilder.spine()
Returns the Spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
NonInflectingLawBuilder.spine()
Returns the Spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
MultiTransitionLawBuilder.spine()
Returns the spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM") . |
Section |
AlongSpineBuilder.spine()
Returns the Spine
License requirements: None. |
Section |
ExtrudeRevolveToolBuilder.toolSection()
Returns the tool super section
License requirements: None. |
Section |
GeneralPattern.toPoints()
Returns the to points
License requirements: None. |
Section |
FtmTransformCurvesBuilder.transformEndCurves()
Returns the end or target constraint for the product shape in the form of curves used in the transformation or morphing calculations
License requirements: None. |
Section |
FtmTransformCurvesBuilder.transformStartCurves()
Returns the starting constraint for the product shape in the form of curves used in the transformation or morphing calculations
License requirements: None. |
Section |
AlongPathPattern.xpath()
Returns the x path
License requirements: None. |
Section |
AlongPathPattern.ypath()
Returns the y path, which can be any continuous section
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
void |
AlignmentMethodBuilder.addSection(int sectionIndex,
Section sec)
Add a section at the given index among existing sections.
|
OnPathDimensionBuilder |
AlignmentMethodBuilder.createOnPathDimBuilder(Section sec,
Point3d pnt)
Set the sections.
|
SpinePointData |
SpinePointDataCollection.createSpinePointData(double lawValue,
double parameter,
Section parent)
Creates a SpinePointData object.
|
SpinePointData |
SpinePointDataCollection.createSpinePointData(Expression lawValueExpression,
double parameter,
Section parent)
Creates a SpinePointData object with expression.
|
EmbossTaper[] |
MultiDraft.getDrafts(Section section)
Return all the drafts
License requirements: None. |
void |
AlignmentMethodBuilder.removeSection(Section sec)
Find and delete the section
License requirements: solid_modeling ("SOLIDS MODELING") . |
void |
AlongSpineBuilder.setFeatureSpine(Section featureSpine)
Set the spine sent by the owning feaure dynamically into builder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
SpinePointData.setParentSpine(Section parent)
Sets the parent spine on which spine point is defined
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
AlignmentMethodBuilder.setSections(Section[] sections)
Set the sections.
|
void |
LawBuilder.setSpineIntoBuilder(Section spine)
Sets the spine dynamically into builder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") . |
void |
AlongPathPattern.setXPath(Section xPath)
License requirements: None. |
void |
AlongPathPattern.setYPath(Section yPath)
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Section |
WatertightFittingsBuilder.flangeSketch()
Returns the section used for creating penetration extrude.
|
Section |
PlatformCreatorBuilder.plateBoundariesSelection()
Returns the platform part boundaries section
License requirements: routing_platform ("Routing Platform") . |
Section |
PlatformCreatorBuilder.selectOuterBoundary()
Returns the platform outer boundary section
License requirements: routing_platform ("Routing Platform") . |
Modifier and Type | Method and Description |
---|---|
Section |
LsdynaGeometryPreparationBuilder.blankCurve()
Returns the blank curve.
|
Section |
FormingInsertBuilder.blankProfile()
Returns the blank profile to extrude the punch or die.
|
Section |
BurringInsertBuilder.blankProfile()
Returns the blank profile to extrude the punch or die.
|
Section |
DieDesignTrimPostBuilder.boundaryCurves()
Returns the boundary curves used to create Trim Post
License requirements: ug_die_design ("Die Design") . |
Section |
CoolingPatternBuilder.channelGuide()
Returns the lines used to create the channel path.
|
Section |
ScrapDesignBuilder.curveList()
Returns the curve list served for boundary+sketch or close boundaries method
License requirements: None. |
Section |
ReliefDesignBuilder.curveSuperSelect()
Returns the sketched curve profile used for creating or editing user defined relief.
|
Section |
BendInsertDesignBuilder.extrudeSketch()
Returns the extrude sketch.
|
Section |
DieDesDrawPunchBuilder.flangeProfile()
Returns the flange profile, which is used for user defined flange shape.
|
Section |
FlowAnalysisBuilder.gatePoints()
Returns the positions of injection gates
License requirements: None. |
Section |
RunnerBuilder.guideLines()
Returns the runner guide lines to create runner channel.
|
Section |
DieDesDrawPunchBuilder.mainWallCenterLine()
Returns the main wall center line profile, which is used for user defined main wall shape.
|
Section |
OffsetCurve3DBuilder.offsetCurves()
Deprecated.
Deprecated in NX10.0.0. Please use
Offset3DCurveBuilder.offsetCurves() instead
|
Section |
GeneralInsertBuilder.outerProfile()
Returns the outer profile
License requirements: None. |
Section |
ConceptPositionBuilder.partPosition()
Returns the part position section
License requirements: None. |
Section |
BackingPadBuilder.selectCurve()
Returns the select curve
License requirements: None. |
Section |
PiercingInsertBuilder.selectDieInsertOutline()
Returns the select die insert outline.
|
Section |
ProfileSplitBuilder.selectProfile()
Returns the selected profile
License requirements: None. |
Section |
InsertAuxiliaryBuilder.selectShankProfile()
Returns the selected shank profile.
|
Section |
QuickQuotationBuilder.selOutline()
Returns the selected outline.
|
Section |
GuidedExtensionBuilder.sheetEdges()
Returns the sheet edges of a sheet body
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") . |
Section |
ScrapDesignBuilder.splitCurve()
Returns the splitting curve
License requirements: None. |
Section |
ScrapDesignBuilder.userAddonCurve()
Returns the user defined add-on curve to create overlap+overcut
License requirements: None. |
Modifier and Type | Method and Description |
---|---|
Section |
WeldFillBuilder.boundary()
Returns the section defining the boundary if the
WeldFillBuilder.BoundaryMethodType.CURVE
option is specified for the boundary type. |
Section |
SurfaceWeldBuilder.boundary()
Returns the section defining all the boundaries to use for creating the surface weld.
|
Section |
WeldPointBuilder.createCenterLine()
To create center line
License requirements: ugweld ("UG WELD") . |
Section |
WeldPointBuilder.createOffsetCurve()
Create offset curve
License requirements: ugweld ("UG WELD") . |
Section |
WeldPointBuilder.createSectionPlaneCurves()
Create section curve
License requirements: ugweld ("UG WELD") . |
Section |
PlugSlotBuilder.edge1()
Returns the edge of the hole or slot on face1
License requirements: None. |
Section |
WeldGrooveBuilder.edgeSet1()
Returns the first edge set
License requirements: ugweld ("UG WELD") . |
Section |
FilletBuilder.edgeSet1()
Returns the edge set1.
|
Section |
WeldGrooveBuilder.edgeSet2()
Returns the second edge set
License requirements: ugweld ("UG WELD") . |
Section |
FilletBuilder.edgeSet2()
Returns the edge set2.
|
Section |
GrooveBuilder.firstFacesetBottomEdges()
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.edgeSet1() and nxopen.weld.WeldGrooveBuilder#setEdgeSet1 instead.
|
Section |
GrooveBuilder.firstFacesetTopEdges()
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.edgeSet1() and nxopen.weld.WeldGrooveBuilder#setEdgeSet1 instead.
|
Section |
WeldPointBuilder.getFirstSection()
Get the first section.
|
Section |
WeldPointBuilder.getSecondSection()
Get the second section. this method for centerline method weld only, this section contains
the second group of curves used to create centerline
License requirements: ugweld ("UG WELD") Created in NX8.0.0 |
Section |
JointmarkGuideBuilder.guideCurve()
Returns the guide curve.
|
Section |
WeldFillBuilder.innerBoundary()
Returns the section containing edges of interior openings which indicate that these openings should be filled over.
|
Section |
WeldBeadPathBuilder.pathSection()
Returns the section defining the path.
|
Section |
EasyPatternBuilder.patternPath()
Returns the pattern path.
|
Section |
GrooveBuilder.secondFacesetBottomEdges()
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.edgeSet2() and nxopen.weld.WeldGrooveBuilder#setEdgeSet2 instead.
|
Section |
GrooveBuilder.secondFacesetTopEdges()
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.edgeSet2() and nxopen.weld.WeldGrooveBuilder#setEdgeSet2 instead.
|
Section |
JointmarkGuideBuilder.section1()
Returns the first section used in Centerline.
|
Section |
JointmarkGuideBuilder.section2()
Returns the second section used in Centerline.
|
Section |
JointmarkGuideBuilder.section3()
Returns the third section used in Offset from Edge.
|
Section |
JointmarkGuideBuilder.section4()
Returns the fourth section used in Existing Curve.
|
Modifier and Type | Method and Description |
---|---|
void |
WeldPointBuilder.commitSection(Section path)
Commit created section
License requirements: ugweld ("UG WELD") . |
Curve[] |
WeldPointBuilder.getSectionCurves(Section section)
Gets the curves contained in the input section
License requirements: ugweld ("UG WELD") . |
void |
GrooveBuilder.setFirstFacesetBottomEdges(Section section)
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.edgeSet1() and nxopen.weld.WeldGrooveBuilder#setEdgeSet1 instead.
|
void |
GrooveBuilder.setFirstFacesetTopEdges(Section section)
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.edgeSet1() and nxopen.weld.WeldGrooveBuilder#setEdgeSet1 instead.
|
void |
WeldPointBuilder.setFirstSection(Section section)
The commit for first section
License requirements: ugweld ("UG WELD") . |
void |
JointmarkGuideBuilder.setGuideCurve(Section guide)
License requirements: ugweld ("UG WELD") . |
void |
GrooveBuilder.setSecondFacesetBottomEdges(Section edgeCollector)
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.edgeSet2() and nxopen.weld.WeldGrooveBuilder#setEdgeSet2 instead.
|
void |
GrooveBuilder.setSecondFacesetTopEdges(Section edgeCollector)
Deprecated.
Deprecated in NX9.0.0. Use
WeldGrooveBuilder.edgeSet2() and nxopen.weld.WeldGrooveBuilder#setEdgeSet2 instead.
|
void |
WeldPointBuilder.setSecondSection(Section section)
Create second section
License requirements: ugweld ("UG WELD") . |
void |
WeldPointBuilder.updateFirstSection(Section totalSection)
Update first section
License requirements: ugweld ("UG WELD") . |
void |
WeldPointBuilder.updateSecondSection(Section totalSection)
Update second section
License requirements: ugweld ("UG WELD") . |
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.