|
NXOpen C++ Reference Guide
|
|
NXOpen C++ Reference Guide
|
  NXOpen | Provides classes and interfaces for the NX Open Common API |
 AME | |
| DB | |
  DocumentStructure | Class to define Document Structure object This object does not need a creator |
 AccessorEvaluatorBuilder | Evaluates an object based on a property value or an index To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAccessorEvaluatorBuilder Created in NX12.0.0 |
| AddPlaceholderBuilder | Builder for adding placeholder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAddPlaceholderBuilder Created in NX1847.0.0 |
| AddPropertyColumnBuilder | Represents configure result table class builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAddPropertyColumnBuilder Created in NX1847.0.0 |
| ADPropertyData | AD Property Data class This object does not need a creator |
| AMEBaseBuilder | JA class for builder which creates one journal able object This is an abstract class, and cannot be instantiated |
| AMEBaseNode | Represents Base Node Use the static method in this class to obtain an instance |
| AMEEngineeringObjectLabel | Represents Engineering Object Label Object This object does not need a creator |
| AMEEngObject | Represents Engineering Object This object does not need a creator |
| AMEExtendedObject | Represents Extended Object Use the static method in this class to obtain an instance |
| AMEGroup | Group Journaling class This object does not need a creator |
| AMEGroupFolder | Group Folder Journaling class This object does not need a creator |
| AMEManager | Represents a manager of automation designer objects To obtain an instance of this class, refer to NXOpen::Session Created in NX11.0.0 |
| AMENamingRule | Represents Naming Rule Object This object does not need a creator |
| AMEPlcHwItem | Represents Plc Hw Item Use the static method in this class to obtain an instance |
| AMEPort | Represents Port Use the static method in this class to obtain an instance |
| AMEQuery | The Query Object This is an abstract class, and cannot be instantiated |
| AMEQueryGroup | The Query Group This is an abstract class, and cannot be instantiated |
| AMEReportRule | Represents Report Rule Object This object does not need a creator |
| AncestorEvaluatorBuilder | Evaluates an ancestor for a given aspect and a starting point To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAncestorEvaluatorBuilder Created in NX12.0.0 |
| ApplicationBuilder | Create the AD application builder see AMEApplicationBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateApplicationBuilder Created in NX11.0.0 |
| AspectDetailsBuilder | JA Class for the Aspect Details UI Block This object does not need a creator |
| AspectNavigatorPreferencesBuilder | JA class for aspect navigator builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAspectNavigatorPreferencesBuilder Created in NX11.0.0 |
| AspectNode | Aspect Node Journaling class This object does not need a creator |
| AspectPrefixBuilder | Builder class which is used to define Aspect Prefixes and Delimiter for NXOpen::AME::Project To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAspectPrefixBuilder Created in NX11.0.0 |
| AspectRoot | AspectRoot Node Journaling class This object does not need a creator |
| AssignAspectBuilder | Reassign a single aspect of an Engineering Object To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAssignAspectBuilder Created in NX11.0.0 |
| AssignmentPort | Represents AssignmentPort Use the static method in this class to obtain an instance |
| AssignSubnetBuilder | Reassign a single aspect of an Engineering Object To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAssignSubnetBuilder Created in NX12.0.0 |
| AssignTemplateToProductBuilder | Builder class to assign a template object to NXOpen::AME::ProductDefinition To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAssignTemplateToProductBuilder Created in NX12.0.0 |
| AssignTypeBuilder | Builder for selecting an engineering object definition To create a new instance of this class, use NXOpen::AME::AMEManager::CreateAssignTypeBuilder Created in NX12.0.0 |
| AttributeHolder | JA class for the AttributeHolder object This is an abstract class, and cannot be instantiated |
| BaseDefinition | JA class for the Base Definition object This is an abstract class, and cannot be instantiated |
| BaseDefinitionAttributeHolder | JA class for the BaseDefinitionAttributeHolder object This does not need a creator |
| BaseEvaluatorBuilder | Represents the builder for all the evaluators |
| BasicPropertiesBuilder | Represents a re-usable component for basic properties such as name and description This object does not need a creator |
| BreakTemplateBuilder | JA class for the insert Eng object dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateBreakTemplateBuilder Created in NX11.0.0 |
| Bulk3DPlacementBuilder | Represents a Bulk3DPlacementBuilder class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateBulk3dplacementBuilder Default values |
| BulkConnectionBuilder | Builder for the bulk connection dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateBulkConnectionBuilder Created in NX11.0.0 |
| BulkEngineeringObjectBuilder | BulkEngineeringObjectBuilder class will be used for bulk Engineering Object Operation |
| CabinetComponentNode | Cabinet Component Node class This object does not need a creator |
| CabinetDesignBuilder | Builder for creating cabinet design To create a new instance of this class, use NXOpen::AME::AMEManager::CreateCabinetDesignBuilder Created in NX12.0.0 |
| CabinetNode | Cabinet Node class This object does not need a creator |
| CabinetObject | Cabinet Object class This object does not need a creator |
| CabinetObjectLabelBuilder | JA class for the cabinet object label dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateCabinetObjectLabelBuilder Created in NX1847.0.0 |
| CabinetRoot | Cabinet Root Node class This object does not need a creator |
| CallMethodRuleBuilder | JA class for the call method rule dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateCallMethodRuleBuilder Created in NX12.0.0 |
| ChildrenEvaluatorBuilder | Evaluates the children objects for a given aspect and a starting point To create a new instance of this class, use NXOpen::AME::AMEManager::CreateChildrenEvaluatorBuilder Created in NX12.0.0 |
| ConditionBlockBuilder | Represents an object that is used to specify conditions based on the property name, value and comparison operator This object does not need a creator |
| ConditionsBuilder | JA class for the conditions dialog Created in NX11.0.0 |
| ConfigureResultTableBuilder | Represents configure result table class builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateConfigureResultTableBuilder Created in NX12.0.0 |
| ConnectedObjectsEvaluatorBuilder | Evaluates the connected objects for the given port and a starting point To create a new instance of this class, use NXOpen::AME::AMEManager::CreateConnectedObjectsEvaluatorBuilder Created in NX12.0.0 |
| ConnectionProductComponent | Connection Product Component class This object does not need a creator |
| ConnectionProductComponentInstance | Connection Product Component Instance class This object does not need a creator |
| ConnectToLibraryItemBuilder | JA class for the connect to library item dialog To create a new instance of this class, use NXOpen::AME::AMEManager::ConnectToLibraryItemBuilder Created in NX11.0.0 |
| CreateDefinitionBuilder | Create and classify definition This object does not need a creator |
| CreateEngObjectDefinitionBuilder | Create and classify engineering object definition To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEngObjectDefinitionBuilder Created in NX11.0.0 |
| CreateMethodBuilder | Represents a method used in the software blocks To create a new instance of this class, use NXOpen::AME::AMEManager::CreateMethodBuilder Default values |
| CreatePmiNoteBuilder | Create PMINote dialog JA class To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePmiNoteBuilder Created in NX11.0.0 |
| CreateProductBuilder | Create and classify product To create a new instance of this class, use NXOpen::AME::AMEManager::CreateProductBuilder Created in NX11.0.0 |
| CreateTemplateBuilder | Create Template dialog JA class To create a new instance of this class, use NXOpen::AME::AMEManager::CreateTemplateBuilder Created in NX11.0.0 |
| CreateTemplateDefinitionBuilder | Create and classify template definition To create a new instance of this class, use NXOpen::AME::AMEManager::CreateTemplateDefinitionBuilder Created in NX11.0.0 |
| DataTypeBuilder | JA class for the data type dialog This object does not need a creator |
| DefineAspectBuilder | Define Aspects for Engineering Object Definition To create a new instance of this class, use NXOpen::AME::AMEManager::DefineAspectBuilder Created in NX11.0.0 |
| DiagramManager | Represents an object that manages sheet elements |
| DiagramNodeBuilder | Represents builder for Diagramming::Node To create a new instance of this class, use NXOpen::AME::AMEManager::CreateDiagramNodeBuilder Created in NX1847.0.0 |
| DocumentRoot | Document Root Node class This object does not need a creator |
| DocumentStructureBuilder | Class to define Document Structure To create a new instance of this class, use NXOpen::AME::AMEManager::CreateDocumentStructureBuilder Created in NX11.0.0 |
| EClassClassNode | EClassData Tree Node class This object does not need a creator |
| EClassDataRoot | EClassData Root Node class This object does not need a creator |
| EClassFolderNode | EClass Folder Node class This object does not need a creator |
| EClassGlobalObjectNode | EClassGlobalObject Tree Node class This object does not need a creator |
| EClassNode | EClassData Tree Node class This object does not need a creator |
| EClassObjectNode | EClassData Tree Node class This object does not need a creator |
| EClassPropertyNode | EClassProperty Tree Node class This object does not need a creator |
| EClassSegmentNode | EClass Segment Node class This object does not need a creator |
| EClassValueListNode | EClassValueList Tree Node class This object does not need a creator |
| EClassVersionNode | EClass Version Node class This object does not need a creator |
| EditAnnotationBuilder | Builder for creating edit annotation To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEditAnnotationBuilder Created in NX12.0.0 |
| EditClauseBuilder | Naming Rule Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEditClauseBuilder Default values |
| EditEngineeringObjectBuilder | JA class for the Eng object dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEditEngineeringObjectBuilder Created in NX11.0.0 |
| EditOrderBuilder | JA class for the Edit Order dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEditOrderBuilder Created in NX12.0.0 |
| ElectricalAnnotationSettingsBuilder | JA class for the Electrical Annotation Settings dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateElectricalAnnotationSettingsBuilder Created in NX11.0.0 |
| ElectricalConnectionSettingsBuilder | Builder object for changing electrical connection settings on diagramming pages associated with the NXOpen::AME::Project |
| EngineeringObjectAspectDetailBuilder | JA class for the Engineering Object Aspect Detail UI block |
| EngineeringObjectBaseBuilder | JA class for the insert Eng object dialog This is an abstract class, and cannot be instantiated |
| EngineeringObjectBuilder | JA class for the insert Eng object dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEngineeringObjectBuilder Created in NX11.0.0 |
| EngineeringObjectDefinitionLabelBuilder | JA class for the insert Engineering object definition label dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEngineeringObjectDefinitionLabelBuilder Created in NX11.0.0 |
| EngineeringObjectNameBuilder | JA class for the Engineering Object and Engineering Object def name and description superclass UI block |
| EngObjectDefinition | JA class for the Engineering Object Definition object This is an abstract class, and cannot be instantiated |
| EOAttributeHolder | EOAttributeHolder Atributes Holder Object This does not need a creator |
| EODataItemAttributeHolder | EODef Atributes Holder Object This does not need a creator |
| EODefAttributeHolder | EODef Atributes Holder Object This does not need a creator |
| EplanImportProjectTemplateBuilder | EplanImportProjectTemplateBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEplanImportProjectTemplateBuilder Created in NX12.0.0 |
| EPLANPlug | Represents EPLANPlug Use the static method in this class to obtain an instance |
| EplanProjectGenerationBuilder | Eplan project generation dialog builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEplanProjectGenerationBuilder Default values |
| EPLANProjectSettings | Eplan project settings Node Journaling class To create or edit an instance of this class, use NXOpen::AME::EplanSettingsBuilder Created in NX11.0.0 |
| EplanProjectTemplateAndStructureBuilder | JA class for the Eplan project template dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEplanProjectTemplateAndStructureBuilder Created in NX12.0.0 |
| EplanSettingsBuilder | EplanSettingsBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEplanSettingsBuilder Created in NX11.0.0 |
| EPLANSocket | Represents EPLANSocket Use the static method in this class to obtain an instance |
| EplanStructureIdentifierOrderBuilder | Represents a Eplan Structure identifier order Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEplanStructureIdentifierOrderBuilder Created in NX12.0.0 |
| EplanStructureSettings | Eplan structure settings Journaling class Will be added once available Created in NX12.0.0 |
| EvaluatorCopyToBuilder | Copies evaluator and its dependents from one engineering object to another To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEvaluatorCopyToBuilder Created in NX12.0.0 |
| ExportEClassMappingBuilder | Export eclass mapping into file To create a new instance of this class, use NXOpen::AME::AMEManager::CreateExportEclassMappingBuilder Created in NX12.0.0 |
| ExpressionEvaluator | Represents an Expression Evaluator This object does not need a creator |
| ExternalObjectsTypeMappingBuilder | This builder class is used to update domain relevancy information on the external objects |
| ExtractAttribute | Extract Attribute Journaling class This object does not need a creator |
| ExtractAttributeAbsoluteBuilder | Create a extract attribute This object does not need a creator |
| ExtractAttributeBaseBuilder | Create a extract attribute This is an abstract class, and cannot be instantiated |
| ExtractAttributeBuilder | Create a extract attribute To create a new instance of this class, use NXOpen::AME::AMEManager::CreateExtractAttributeBuilder Created in NX11.0.0 |
| ExtractAttributeCurrentObjectBuilder | Create a extract attribute This object does not need a creator |
| ExtractAttributeExternalObjectBuilder | Creates a NXOpen::AME::ExtractAttribute object between an automation designer object and an external application object |
| ExtractAttributePortBuilder | Create a extract port attribute builder This object does not need a creator |
| ExtractAttributeRelativeBuilder | Create a extract attribute This object does not need a creator |
| FindByConditionEvaluatorBuilder | Evaluates an object based on a property To create a new instance of this class, use NXOpen::AME::AMEManager::CreateFindByConditionEvaluatorBuilder Created in NX12.0.1 |
| FormSheetBuilder | JA class for the Form Sheet dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateFormSheetBuilder Default values |
| FormSheetObject | JA class for the FormSheetObject This is an abstract class, and cannot be instantiated |
| FormSheetSettingsBuilder | JA class for the Form Sheet Settings dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateFormSheetSettingsBuilder Created in NX12.0.0 |
| FragmentAttributeHolder | Fragment Object Atributes Holder This does not need a creator |
| FragmentBuilder | Represents a Fragment creation class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateFragmentBuilder Created in NX11.0.0 |
| FragmentObject | Represents a Fragment Object This object does not need a creator |
| FunctionCallInstanceBuilder | JA class for the reuse rule dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateFunctionCallInstanceBuilder Created in NX12.0.0 |
| GeneralAnnotationSettingsBuilder | Builder for the general annotation settings dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateGeneralAnnotationSettingsBuilder Created in NX11.0.0 |
| GeneralConnectionSettingsBuilder | Builder for the General Connection Settings dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateGeneralConnectionSettingsBuilder Created in NX11.0.0 |
| GenerateReportsBuilder | Comment To create a new instance of this class, use NXOpen::AME::AMEManager::CreateGenerateReportsBuilder Created in NX11.0.0 |
| GlobalSelectionBuilder | GlobalSelectionBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateGlobalSelectionBuilder Created in NX11.0.0 |
| GroupBuilder | JA class for groups To create a new instance of this class, use NXOpen::AME::AMEManager::CreateGroupBuilder Created in NX11.0.0 |
| GroupRoot | Group Root Node Journaling class This object does not need a creator |
| IEngObject | Represents Engineering Object Created in NX11.0.0 |
| ImportEClassMappingBuilder | Import eClass mapping To create a new instance of this class, use NXOpen::AME::AMEManager::CreateImportEclassMappingBuilder Created in NX12.0.0 |
| ImportEClassProductBuilder | Imports a eclass product xml file To create a new instance of this class, use NXOpen::AME::AMEManager::CreateImportEclassProductBuilder Created in NX12.0.0 |
| ImportEClassSchemaBuilder | Imports a eclass schema xml file To create a new instance of this class, use NXOpen::AME::AMEManager::CreateImportEclassSchemaBuilder Created in NX12.0.0 |
| ImportEplanPageMacroBuilder | ImportEplanPageMacroBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateImportEplanPageMacroBuilder Created in NX11.0.0 |
| ImportGlobalMappingBuilder | Imports a global mapping xml file To create a new instance of this class, use NXOpen::AME::AMEManager::CreateImportGlobalMappingBuilder Created in NX12.0.0 |
| ImportHWXmlBuilder | Import HW Xml builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateImportHwxmlBuilder Created in NX11.0.0 |
| ImportNode | Import Object Journaling class This object does not need a creator |
| ImportObject | Import Object Journaling class This object does not need a creator |
| INodeObject | Represents INode Object Created in NX12.0.0 |
| InsertObjectBuilder | JA class for Insert Object dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateInsertObjectBuilder Default values |
| InsertSettingsBuilder | Re-usable UI for Settings properties in Insert EO and Insert Template dialog Created in NX12.0.0 |
| InspectSnapshotBuilder | Inspects snapshot for AD project To create a new instance of this class, use NXOpen::AME::AMEManager::CreateInspectSnapshotBuilder Created in NX1847.0.0 |
| InstanceDataBlockBuilder | JA class for the reuse rule dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateInstanceDataBlockBuilder Created in NX11.0.0 |
| InstantiateBaseDefinitionReuseSelectionBuilder | Builder for selecting base definition this is a block Created in NX12.0.0 |
| InstantiateTemplateBulkBuilder | JA class for the insert Eng object dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateInstantiateTemplateBulkBuilder Default values |
| InterfaceMemberPort | InterfaceMemberPort Journaling class This object does not need a creator |
| InterruptionPointBuilder | Represents builder for AME::DB::InterruptionPoint To create a new instance of this class, use NXOpen::AME::AMEManager::CreateInterruptionPointBuilder Created in NX12.0.0 |
| IPort | Represents an IPort This is an abstract class, and cannot be instantiated |
| IPortsContainer | Represents Ports Container Created in NX11.0.0 |
| LayoutDefinitionBuilder | Interface for the LayoutDefinitionBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateLayoutDefinitionBuilder Created in NX11.0.0 |
| LDCachedAttribute | JA class for the Line Design cache Attribute object This is an abstract class, and cannot be instantiated |
| LineDesignerMappingBuilder | Line Designer mapping dialog JA interface To create a new instance of this class, use NXOpen::AME::AMEManager::CreateLineDesignerMappingBuilder Default values |
| LoadLineDesignerBuilder | JA class for the insert LoadLineDesigner dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateLoadLineDesignerBuilder Created in NX11.0.0 |
| Manage2dSymbolsBuilder | Represents a Manage2dSymbolsBuilder class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateManage2dSymbolsBuilder Default values |
| Manage3DModelsBuilder | Represents the builder that is used to assign 3D models to a NXOpen::AME::ProductDefinition To create a new instance of this class, use NXOpen::AME::AMEManager::CreateManage3dmodelsBuilder Created in NX11.0.0 |
| ManageEclassMappingBuilder | Represents a ManageEclassMappingBuilder class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateManageEclassmappingBuilder Created in NX11.0.0 |
| ManageGlobalMappingBuilder | Represents a ManageGlobalMappingBuilder class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateManageGlobalMappingBuilder Created in NX1847.0.0 |
| ManageInterruptionPointsBuilder | JA class for the Manage Interruption Points builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateManageInterruptionPointsBuilder Default values |
| ManageObjectTypeBuilder | Builder class for assigning AD type to NXOpen::Part and name to NXOpen::Assemblies::Component To create a new instance of this class, use NXOpen::AME::AMEManager::CreateManageObjectTypeBuilder Created in NX12.0.0 |
| ManageTypeMappingBuilder | This builder class is used to update relevancy information on the external objects |
| MappingSourceBuilder | This builder class is a re-usable component used to filter external objects by discipline |
| MapToExistingObjectBuilder | Line Designer map to existing (EO) dialog JA interface To create a new instance of this class, use NXOpen::AME::AMEManager::CreateMapToExistingObjectBuilder Created in NX11.0.0 |
| MountingInterface | Represents a Mounting Interface This object does not need a creator |
| MountingInterfaceBuilder | Builder class for creating mounting interface object in NXOpen::Part To create a new instance of this class, use NXOpen::AME::AMEManager::CreateMountingInterfaceBuilder Default values |
| MultipleObjectsBuilder | JA class for for builder which creates more than one journal able objects This is an abstract class, and cannot be instantiated |
| MultiValueObjectsPort | MultiValueObjectsPort Journaling class This object does not need a creator |
| NamingRuleBuilder | Naming Rule Builder To create a new instance of this class, use NXOpen::AME::NamingRuleListBuilder::CreateRule Created in NX11.0.0 |
| NamingRuleBuilderList | Represents a list of objects |
| NamingRuleListBuilder | Classification to Engineering Object Name Map Builder this is a block Created in NX11.0.0 |
| NamingRuleSettingsBuilder | JA class for dialog for naming rule settings To create a new instance of this class, use NXOpen::AME::AMEManager::CreateNamingRuleSettingsBuilder Created in NX11.0.0 |
| ObjectConnectionBuilder | JA class for the reuse object connection block Created in NX11.0.0 |
| ObjectConnectionDetailBuilder | JA class for the reuse object connection detail block Created in NX12.0.0 |
| ObjectEvaluatorBuilder | Evaluates the object given a starting point To create a new instance of this class, use NXOpen::AME::AMEManager::CreateObjectEvaluatorBuilder Created in NX12.0.0 |
| ObjectNameBuilder | Object Name JA class Created in NX11.0.0 |
| ObjectNameIndexBuilder | Object Name Index JA class Created in NX11.0.0 |
| OperandRuleBuilder | JA class for the parameter rule dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateOperandRuleBuilder Created in NX11.0.0 |
| OperatorRuleBuilder | OperatorRule Dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateOperatorRuleBuilder Created in NX12.0.0 |
| OpticalAnnotationSettingsBuilder | JA class for the Optical Annotation Settings dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateOpticalAnnotationSettingsBuilder Created in NX12.0.0 |
| OpticalConnectionSettingsBuilder | Builder object for changing optical connection settings on diagramming pages associated with the NXOpen::AME::Project To create a new instance of this class, use NXOpen::AME::AMEManager::CreateOpticalConnectionSettingsBuilder Created in NX12.0.0 |
| OrderAspectsBuilder | Represents a OrderAspectsBuilder for changing the order of Navigator To create a new instance of this class, use NXOpen::AME::AMEManager::CreateOrderAspectsBuilder Created in NX11.0.0 |
| PageAttributeHolder | Page Object Atributes Holder This does not need a creator |
| PageBuilder | Represents a Page creation class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePageBuilder Default values |
| PageNamingBuilder | Class to define Page naming schema To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePageNamingBuilder Default values |
| PageNode | Represents a Page Node This object can not be created directly |
| PageObject | Represents a Page Object This object does not need a creator |
| ParameterRuleBuilder | JA class for the parameter rule dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateParameterRuleBuilder Created in NX12.0.0 |
| ParentEvaluatorBuilder | Evaluates the parent object for a given aspect and a starting point To create a new instance of this class, use NXOpen::AME::AMEManager::CreateParentEvaluatorBuilder Created in NX12.0.0 |
| PlaceAutomationBuilder | Reassign a single aspect of an Engineering Object To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePlaceAutomationBuilder Created in NX12.0.0 |
| PlcBlock | Plc Block Node Journaling class This is an abstract class |
| PlcCodePosition | Represents Plc Code Position Object This object does not need a creator |
| PlcInterfaceSection | Represents PlcInterfaceSection Use the static method in this class to obtain an instance |
| PlcInterfaceVariable | Represents PlcInterfaceVariable Use the static method in this class to obtain an instance |
| PlcInterfaceVariableBuilder | PlcInterfaceVariableBuilder class will be used for (bulk) variable object creation and editing To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePlcInterfaceVariableBuilder Default values |
| PlcMemoryAreaBuilder | Represents a Subnet creation class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePlcMemoryAreaBuilder Created in NX12.0.0 |
| PlcMethod | Plc Method Node Journaling class This is an abstract class |
| PlcMethodBuilder | The Journalling class for PlcMethodBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePlcMethodBuilder Created in NX11.0.0 |
| PlcRule | PlcRule Journaling class This object does not need a creator |
| PlcSoftwareGenPort | PlcSoftwareGenPort Journaling class This object does not need a creator |
| PlcSubFolder | Software Sub Folder Journaling class This object does not need a creator |
| PlcSymbolBuilder | Class to create Functional Tags and assign them to PLC Channels To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePlcSymbolBuilder Created in NX11.0.0 |
| PlcSymbolsEvaluatorBuilder | Evaluates the PLC tags for a given aspect and a starting point To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePlcSymbolsEvaluatorBuilder Created in NX12.0.0 |
| PlcVendorSymbolBuilder | Represents a Subnet creation class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePlcVendorSymbolBuilder Created in NX12.0.0 |
| PortBuilder | Builder for the software block properties dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePortBuilder Created in NX11.0.0 |
| PortConnectionBuilder | Builder for the port connector dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePortConnectionBuilder Created in NX11.0.0 |
| PortEvaluatorBuilder | Evaluates the port objects for the given port and a starting point To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePortEvaluatorBuilder Created in NX12.0.0 |
| PortsManagerBuilder | Provides journal methods for the ports manager dialog |
| PrintPagesBuilder | JA class for the PrintPages dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePrintPagesBuilder Created in NX1847.0.0 |
| ProductComponent | Product Component class This object does not need a creator |
| ProductDefAttributeHolder | ProductDefinition Atributes Holder Object This does not need a creator |
| ProductDefinition | JA class for the Product Definition object This is an abstract class, and cannot be instantiated |
| ProductMatchingRulesBuilder | Represents Product Matching Rules class builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateProductMatchingRulesBuilder Created in NX11.0.0 |
| ProductSelectionBuilder | JA class for Product Selection dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateProductSelectionBuilder Default values |
| Project | Project Journaling class Created by Application_AME_ApplicationBuilder when we enter the application Created in NX11.0.0 |
| ProjectEngineeringObjectBuilder | JA class for the insert Project Eng object dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateProjectEngineeringObjectBuilder Created in NX11.0.0 |
| ProjectSymbolAnnotationBuilder | JA class for the Project Symbol Annotation dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateProjectSymbolAnnotationBuilder Created in NX1847.0.0 |
| PropertyEvaluatorBuilder | Evaluates the property of an object given a category and property To create a new instance of this class, use NXOpen::AME::AMEManager::CreatePropertyEvaluatorBuilder Created in NX12.0.0 |
| QueryBuilder | Represents query class builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateQueryBuilder Created in NX11.0.0 |
| QueryClause | JA class for the QueryClause object This is an abstract class, and cannot be instantiated |
| QueryFolder | Query Folder Journaling class This object does not need a creator |
| QueryNode | The Query Node This is an abstract class, and cannot be instantiated |
| QueryResult | The Query Result This is an abstract class, and cannot be instantiated |
| ReferenceDesignationSetNode | Reference Designation Set Node Journaling class This object does not need a creator |
| ReferenceObjectBuilder | Re-usable UI consist of a context and source selection Created in NX12.0.0 |
| ReportDefinition | The Report Definition Node This object does not need a creator |
| ReportDefinitionBuilder | Represents ReportDefinitionBuilder class builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateReportDefinitionBuilder Created in NX1847.0.0 |
| ReportDefinitionFolder | Report Definition Journaling class This object does not need a creator |
| ReportDefinitionNode | The Report Definition Node This is an abstract class, and cannot be instantiated |
| ReportPlaceHolderData | JA class for the ReportPlaceHolderData object This is an abstract class, and cannot be instantiated |
| ReportsSettingsBuilder | Interface for the ReportsSettingsBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateReportsSettingsBuilder Created in NX11.0.0 |
| ReportTemplate | JA class for the ReportTemplate object This is an abstract class, and cannot be instantiated |
| ReportTemplateBuilder | Class to create Report Template and assign the ReportQuery and Report Layout to them To create a new instance of this class, use NXOpen::AME::AMEManager::CreateReportTemplateBuilder Created in NX11.0.0 |
| SaveToLibraryBuilder | Create Software Block JA class To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSaveToLibraryBuilder Created in NX11.0.0 |
| SchematicSymbol | Represents a Schematic Symbol object This object does not need a creator |
| SchematicSymbolConfigurationBuilder | JA class for SchematicSymbolConfigurationBuilder dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSchematicSymbolConfigurationBuilder Created in NX11.0.0 |
| SelectADReuseLibraryItemBuilder | Builder for selecting automation designer reuse lirary item this is a block Created in NX1847.0.0 |
| SelectADTypeBuilder | Journalling Interface class for Builder which allows selection of Type, Product or Template |
| SelectAMEBaseNode | Represents a single object selection |
| SelectAMEBaseNodeList | Represents a list of objects on a selection list |
| SelectAMEExtendedObject | Represents a single object selection |
| SelectAMEPort | Represents a single object selection |
| SelectAndHighlightBuilder | Represents a SelectAndHighlightBuilder for select and highlight in the Navigators To create a new instance of this class, use NXOpen::AME::AMEManager::SelectAndHighlightBuilder Created in NX11.0.0 |
| SelectAspectNode | Represents a single object selection |
| SelectAttrPropSourceBuilder | Journalling Interface class for Builder which allows selection of an object which has attribute properties set on it |
| SelectBaseDefinitionNodeBuilder | Builder for selecting base definition node from navigators This object does not need a creator Created in NX12.0.0 |
| SelectClassificationBuilder | Select a part from the reuse library Created in NX11.0.0 |
| SelectClassificationFromTreeBuilder | Select Type from the Classification Library This object does not need a creator |
| SelectComponentBuilder | Builder for selection of external component this is a block Created in NX1847.0.0 |
| SelectExternalObjectBuilder | Journalling Interface class for Builder which allows selection of external objects |
| SelectExternalReuseLibraryItemBuilder | Builder for selecting external reuse lirary item this is a block Created in NX1847.0.0 |
| SelectINodeObject | Represents a single object selection |
| SelectINodeObjectList | Represents a list of objects on a selection list |
| SelectionBaseDefinitionBuilder | Journalling Interface class for Builder which allows selection of BaseDefinition |
| SelectionEngineeringObjectDefinitionBuilder | JA class for the Engineering Object Definition Block This object does not need a creator |
| SelectIPort | Represents a single object selection |
| SelectMountingInterfaceLocationBuilder | Builder for selecting mounting interface location from graphics window This object does not need a creator Created in NX12.0.0 |
| SelectProductDefinitionBuilder | JA class for the Product Definition Selection This object does not need a creator |
| SelectReuseLibraryItemBuilder | Builder for selecting base definition this is a block Created in NX1847.0.0 |
| ShieldBuilder | Represents builder for AME::DB::Shield To create a new instance of this class, use NXOpen::AME::AMEManager::CreateShieldBuilder Created in NX1847.0.0 |
| ShowHideObjectsBuilder | JA class for ShowHideObjectsBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateShowHideObjectsBuilder Created in NX11.0.0 |
| Snap3DModelsBuilder | Represents a Snap3DModelsBuilder class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSnap3dmodelsBuilder Created in NX12.0.0 |
| SoftwareBlockDataTypePort | SoftwareBlockDataTypePort Journaling class This object does not need a creator |
| SortingBlockBuilder | Sorts the list expression output according to the property Created in NX12.0.0 |
| SubnetBuilder | Represents a Subnet creation class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSubnetBuilder Created in NX12.0.0 |
| SumEvaluatorBuilder | Evaluates sum of given property for list of objects To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSumEvaluatorBuilder Created in NX1847.0.0 |
| SWStatusItem | Represents SW Status Item Created in NX11.0.0 |
| SymbolAnnotationBuilder | Represents a Symbol Annotation creation class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSymbolAnnotationBuilder Created in NX12.0.0 |
| SymbolAnnotationStyleBuilder | Represents a re-usable component for Symbol annotation styles This object does not need a creator |
| SymbolAuthoringBuilder | Represents a Symbol Authoring class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSymbolAuthoringBuilder Default values |
| SymbolLocationBuilder | JA class for the symbol location reusable component This object does not need a creator |
| SymbolNoteBuilder | Represents a Symbol Note creation class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSymbolNoteBuilder Default values |
| SymbolRoot | Symbol Root Node class This object does not need a creator |
| SymbolVariantBuilder | Represents a Symbol Variant creation class Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateSymbolVariantBuilder Created in NX1847.0.0 |
| TCSavedQueriesBuilder | Represents a TC Saved Queries builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateEditQueryScopeBuilder Created in NX11.0.0 |
| TeeJunctionBuilder | JA class for creating Tee Junction To create a new instance of this class, use NXOpen::AME::AMEManager::CreateTeeJunctionBuilder Created in NX12.0.0 |
| TiaPortalProjectSettings | Tia Portal project settings node journaling class This object does not need a creator |
| TiaPortalProjectSettingsBuilder | TiaPortalProjectSettingsBuilder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateTiaPortalProjectSettingsBuilder Created in NX12.0.0 |
| TiaProjectItemBuilder | TIA project item builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateTiaprojectItemBuilder Created in NX11.0.0 |
| TransferFileDataBuilder | Imports a new one or updates the existing configuration in AD Upstream Data Navigator from the external file |
| TypedProductComponent | Typed Product Component class This object does not need a creator |
| TypedProductComponentInstance | Product Component Instance class This object does not need a creator |
| TypeMappingBuilder | JA class for the type mapping dialog this is a block Created in NX11.0.0 |
| TypeMappingBuilderList | Represents a list of objects |
| TypeMappingListBuilder | Type Mapping List Builder To create a new instance of this class, use NXOpen::AME::AMEManager::CreateTypeMappingListBuilder Created in NX11.0.0 |
| UnloadLineDesignerBuilder | JA class for the insert UnloadLineDesigner dialog To create a new instance of this class, use NXOpen::AME::AMEManager::CreateUnloadLineDesignerBuilder Created in NX11.0.0 |
| UpdateObjectsBuilder | Class to define Update Objects To create a new instance of this class, use NXOpen::AME::AMEManager::CreateUpdateObjectsBuilder Created in NX1847.0.0 |
| UpstreamDataRoot | UpstreamData Root Node class This object does not need a creator |
| AnimationDesigner | Provides classes and interfaces relating to Animation Designer |
| Nav | Provides classes and interfaces relating to Animation Designer Nav |
| Solution | Represents a AnimationDesigner Nav Solution Class |
 SolutionCollection | Represents a NXOpen::AnimationDesigner::Nav::SolutionCollection |
 iterator | Iterator for accessing the contents of the collection |
| AnimatedCamera | Represents an Animated Camera feature |
| AnimatedCameraBuilder | Represents a NXOpen::AnimationDesigner::AnimatedCameraBuilder |
| AnimatedCameraCollection | Represents a collection of Animated Camera objects |
| iterator | Iterator for accessing the contents of the collection |
| AnimatedExplode | Represents an animated explode feature |
| AnimatedExplodeBuilder | Represents a NXOpen::AnimationDesigner::AnimatedExplodeBuilder |
| AnimatedExplodeCollection | Represents a collection of Animated Explode objects |
| iterator | Iterator for accessing the contents of the collection |
| AnimatedVisibility | Represents an Animated Visibility feature |
| AnimatedVisibilityBuilder | Represents a NXOpen::AnimationDesigner::AnimatedVisibilityBuilder |
| AnimatedVisibilityCollection | Represents a collection of Animated Visibility objects |
| iterator | Iterator for accessing the contents of the collection |
| AnimationDesignerManager | Represents an object to manage Animation Designer application objects |
| ConstraintConversionBuilder | Represents a AnimationDesigner::ConstraintConversionBuilder builder To create a new instance of this class, use NXOpen::AnimationDesigner::AnimationDesignerManager::CreateConstraintConversionBuilder Created in NX12.0.0 |
| Contact | Represents a Contact feature |
| ContactBuilder | Represents a NXOpen::AnimationDesigner::ContactBuilder |
| ContactCollection | Represents a collection of Contact objects |
| iterator | Iterator for accessing the contents of the collection |
| Coupler | Represents the Animation Designer coupler class |
| CouplerBuilder | Represents a base builder for Couplers |
| CurveOnCurveJoint | Represents a Curve On Curve Joint feature |
| CurveOnCurveJointBuilder | Represents a NXOpen::AnimationDesigner::CurveOnCurveJointBuilder |
| CurveOnCurveJointCollection | Represents a collection of Curve On Curve Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| CylindricalJoint | Represents a Cylindrical Joint feature |
| CylindricalJointBuilder | Represents a NXOpen::AnimationDesigner::CylindricalJointBuilder |
| CylindricalJointCollection | Represents a collection of Cylindrical Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| FixedJoint | Represents a Fixed Joint feature |
| FixedJointBuilder | Represents a NXOpen::AnimationDesigner::FixedJointBuilder |
| FixedJointCollection | Represents a collection of Fixed Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| Gear | Represents a Gear feature |
| GearBuilder | Represents a NXOpen::AnimationDesigner::GearBuilder |
| GearCollection | Represents a collection of Gear objects |
| iterator | Iterator for accessing the contents of the collection |
| InverseKinematicsBuilder | Represents a AnimationDesigner::InverseKinematicsBuilder To create a new instance of this class, use NXOpen::AnimationDesigner::AnimationDesignerManager::CreateInverseKinematicsBuilder Created in NX1847.0.0 |
| Measure | Represents a Measure feature |
| MeasureBuilder | Represents a NXOpen::AnimationDesigner::MeasureBuilder |
| MeasureCollection | Represents a collection of Measure objects |
| iterator | Iterator for accessing the contents of the collection |
| MechanicalCam | Represents a Mechanical Cam feature |
| MechanicalCamBuilder | Represents a NXOpen::AnimationDesigner::MechanicalCamBuilder |
| MechanicalCamCollection | Represents a collection of Mechanical Cam objects |
| iterator | Iterator for accessing the contents of the collection |
| Motor | Represents the Animation Designer motor class |
| MotorBuilder | Represents a base builder for Motor |
| PhysicsJoint | Represents the Animation Designer joint class |
| PhysicsJointBuilder | Represents a base builder for Physics Joints |
| PlanarJoint | Represents a Planar Joint feature |
| PlanarJointBuilder | Represents a NXOpen::AnimationDesigner::PlanarJointBuilder |
| PlanarJointCollection | Represents a collection of Planar Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| PointOnCurveJoint | Represents a Point On Curve Joint feature |
| PointOnCurveJointBuilder | Represents a NXOpen::AnimationDesigner::PointOnCurveJoint builder |
| PointOnCurveJointCollection | Represents a collection of Point On Curve Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| PositionMotor | Represents a Position Motor feature |
| PositionMotorBuilder | Represents a NXOpen::AnimationDesigner::PositionMotorBuilder |
| PositionMotorCollection | Represents a collection of Position Motor objects |
| iterator | Iterator for accessing the contents of the collection |
| PreferencesBuilder | Represents a NXOpen::AnimationDesigner::PreferencesBuilder builder |
| RackPinion | Represents a Rack Pinion feature |
| RackPinionBuilder | Represents a NXOpen::AnimationDesigner::RackPinionBuilder |
| RackPinionCollection | Represents a collection of Rack Pinion objects |
| iterator | Iterator for accessing the contents of the collection |
| RevoluteJoint | Represents a Revolute Joint feature |
| RevoluteJointBuilder | Represents a NXOpen::AnimationDesigner::RevoluteJointBuilder |
| RevoluteJointCollection | Represents a collection of Revolute Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| RigidGroup | Represents a Rigid Group feature |
| RigidGroupBuilder | Represents a NXOpen::AnimationDesigner::RigidGroupBuilder |
| RigidGroupCollection | Represents a collection of Rigid Group objects |
| iterator | Iterator for accessing the contents of the collection |
| ScrewJoint | Represents a Screw Joint feature |
| ScrewJointBuilder | Represents a NXOpen::AnimationDesigner::ScrewJointBuilder |
| ScrewJointCollection | Represents a collection of Screw Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| SliderJoint | Represents a Slider Joint feature |
| SliderJointBuilder | Represents a NXOpen::AnimationDesigner::SliderJointBuilder |
| SliderJointCollection | Represents a collection of Slider Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| SpeedMotor | Represents a Speed Motor feature |
| SpeedMotorBuilder | Represents a NXOpen::AnimationDesigner::SpeedMotorBuilder |
| SpeedMotorCollection | Represents a collection of Speed Motor objects |
| iterator | Iterator for accessing the contents of the collection |
| SphericalJoint | Represents a Spherical Joint feature |
| SphericalJointBuilder | Represents a AnimationDesigner::SphericalJointBuilder builder To create a new instance of this class, use NXOpen::AnimationDesigner::SphericalJointCollection::CreateSphericalJointBuilder Created in NX12.0.0 |
| SphericalJointCollection | Represents a collection of Spherical Joint objects |
| iterator | Iterator for accessing the contents of the collection |
| Annotations | Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations |
| AddTicBuilder | Represents a NXOpen::Annotations::AddTicBuilder |
| AngularDimension | Represents an angular dimension Abstract class Created in NX4.0.0 |
| AngularDimensionBuilder | Represents a NXOpen::Annotations::AngularDimension builder This is an abstract class and cannot be instantiated |
| AngularTolerance | Represents angular tolerance Created in NX4.0.0 |
| Annotation | Represents an annotation / PMI (Product and Manufacturing Information) display instance object |
| AssociativeOriginData | Describes the geometry that an annotation's origin is associated with |
| AnnotationManager | Represents an object that manages annotation and PMI (Product and Manufacturing Information) display instance objects |
| AnnotationPlacement | Represents an object that journals the adding of a leader and setting of the origin for dialogs that use a builder Created in NX5.0.0 |
| AppendedText | Represents Appended text Created in NX4.0.0 |
| AppendedTextBuilder | This class is used to set/access the appended text of a dimension This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| AppendedTextEditorBuilder | Represents a NXOpen::Annotations::AppendedTextEditorBuilder builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateAppendedTextEditorBuilder Created in NX9.0.0 |
| ArbitraryAreaSeedBuilder | Represents a NXOpen::Annotations::ArbitraryAreaSeedBuilder To create a new instance of this class, use NXOpen::Annotations::PmiManager::CreateArbitraryAreaSeedBuilder Created in NX6.0.0 |
| ArbitraryAreaSeedBuilderList | Represents a list of objects |
| ArbitraryTarget | Represents an arbitrary datum target |
| ArbitraryTargetData | Represents arbitrary datum target data Created in NX4.0.0 |
| ArcComponent | Represents a single arc in an annotation and can be queried for information about that arc |
| ArcLengthDimension | Represents an arc length dimension To create or edit an instance of this class, use NXOpen::Annotations::CurveLengthDimensionBuilder Created in NX4.0.0 |
| AreaTarget | Represents an area target To create or edit an instance of this class, use NXOpen::Annotations::PmiDatumTargetBuilder Created in NX4.0.0 |
| ArrowComponent | Represents a single arrow in an annotation and can be queried for information about that arrow |
| AssociateDimensionBuilder | Represents a NXOpen::Annotations::AssociateDimensionBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateAssociateDimensionBuilder Created in NX5.0.0 |
| AssociatedObject | Represents the objects to which the PMI applies |
| AssociatedObjectsBuilder | The associated objects builder is used to store objects which annotations are associated to Created in NX6.0.0 |
| AssociatedObjectsSetsBuilder | The associated objects sets builder is used to store lists of objects which annotations are associated to Created in NX10.0.0 |
| AssociativeText | Associative text class creates text associated to object and part attributes as well as object properties such as a drawing sheet name |
| Associativity | Represents an associativity object |
| AssociativityBuilder | Represents a NXOpen::Annotations::AssociativityBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateAssociativityBuilder Created in NX5.0.0 |
| AutomaticCenterlineBuilder | Builder for creating Automatic Centerlines To create a new instance of this class, use NXOpen::Annotations::CenterlineCollection::CreateAutomaticCenterlineBuilder Default values |
| BalloonNote | Represents a Balloon Note To create or edit an instance of this class, use NXOpen::Annotations::BalloonNoteBuilder Created in NX6.0.0 |
| BalloonNoteBuilder | Represents a NXOpen::Annotations::BalloonNote builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateBalloonNoteBuilder Created in NX6.0.0 |
| BaseAngularDimension | Represents an angular dimension Abstract class Created in NX9.0.0 |
| BaseAngularDimensionBuilder | Represents a NXOpen::Annotations::AngularDimension builder This is an abstract class and cannot be instantiated |
| BaseArcLengthDimension | Represents a arc length dimension Abstract class Created in NX6.0.0 |
| BaseArrow | Represents a BaseArrow There is no KF creator for this class |
| BaseBoltCircleCenterline | Represents a base bolt centerline class This is an abstract class |
| BaseBoltCircleCenterlineBuilder | Represents a Base Bolt Centerline Builder for Pmi and Drafting bolt circle centerline This is an abstract class and cannot be instantiated |
| BaseCenterline3d | Represents a Base 3D centerline This is an abstract class |
| BaseCenterline3dBuilder | Represents a Base Centerline3d Builder for pmi and drafting 3D centerlines This is an abstract class, and cannot be instantiated |
| BaseCenterMark | Represents a base center mark class This is an abstract class |
| BaseCenterMarkBuilder | Represents a Base CenterMark Builder for Pmi and Drafting centermark This is an abstract class, and cannot be instantiated |
| BaseChamferDimension | Represents a chamfer dimension Abstract class Created in NX6.0.0 |
| BaseChamferDimensionBuilder | Represents a NXOpen::Annotations::BaseChamferDimension builder This is an abstract class and cannot be instantiated |
| BaseConcentricCircleDimension | Represents a concentric circle dimension Abstract class Created in NX6.0.0 |
| BaseCurveLengthDimensionBuilder | Represents a NXOpen::Annotations::BaseArcLengthDimension builder This is an abstract class and cannot be instantiated |
| BaseCustomSymbol | Represents a base custom symbol This is an abstract class and cannot be directly instantiated Created in NX4.0.0 |
| BaseCustomSymbolBuilder | Represents a base Builder for Drafting and PMI Custom Symbol This is an abstract class, and cannot be instantiated |
| BaseCylindricalDimension | Represents a cylindrical dimension Abstract class Created in NX6.0.0 |
| BaseDatum | Represents a datum This is an abstract class, and cannot be created |
| BaseDatumTarget | Represents a datum target This is an abstract class, and cannot be created |
| BaseDiameterDimension | Represents a diameter dimension Abstract class Created in NX6.0.0 |
| BaseFcf | Represents a datum This is an abstract class, and cannot be created |
| BaseFoldedRadiusDimension | Represents a folded radius dimension Abstract class Created in NX6.0.0 |
| BaseFrameBar | Represents a base frame bar class This is an abstract class and cannot be directly instantiated Created in NX8.0.0 |
| BaseFrameBarBuilder | Represents a NXOpen::Annotations::BaseFrameBarBuilder |
| BaseHoleDimension | Represents a hole dimension Abstract class Created in NX6.0.0 |
| BaseHorizontalDimension | Represents a horizontal dimension Abstract class Created in NX6.0.0 |
| BaseLinearDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder This is an abstract class and cannot be instantiated |
| BaselineDimension | Represents a baseline dimension |
| BaseNote | Represents a Note This is an abstract class and cannot be directly instantiated Created in NX6.0.0 |
| BaseOrdinateDimensionBuilder | Represents a NXOpen::Annotations::OrdinateDimension builder This is an abstract class and cannot be instantiated |
| BaseParallelDimension | Represents a parallel dimension Abstract class Created in NX6.0.0 |
| BasePerpendicularDimension | Represents a perpendicular dimension Abstract class Created in NX6.0.0 |
| BaseRadialDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder This is an abstract class and cannot be instantiated |
| BaseRadiusDimension | Represents a radius dimension Abstract class Created in NX6.0.0 |
| BaseRapidDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder This is an abstract class and cannot be instantiated |
| BaseSurfaceFinish | Represents a Base Surface Finish This is an abstract class, and cannot be instantiated |
| BaseSurfaceFinishBuilder | Represents a NXOpen::Annotations::BaseSurfaceFinish builder This is an abstract class, and cannot be instantiated |
| BaseSymbolBuilder | Represents a Base Symbol Builder This is an abstract class, and cannot be instantiated |
| BaseThicknessDimensionBuilder | Represents a NXOpen::Annotations::BaseThicknessDimensionBuilder builder This is an abstract class and cannot be instantiated |
| BaseTitleBlockBuilder | Represents a NXOpen::Annotations::BaseTitleBlockBuilder builder |
| BaseVerticalDimension | Represents a horizontal dimension Abstract class Created in NX6.0.0 |
| BendTable | This class represents a bend table |
| BendTableBuilder | Represents a NXOpen::Annotations::BendTableBuilder |
| BendTableCollection | Represents a collection of NXOpen::Annotations::BendTable objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BendTableSettingsBuilder | Represents a NXOpen::Annotations::BendTableSettingsBuilder Created in NX9.0.0 |
| BillOfMaterialBuilder | Builder for Bill of Material functionality used in Routing |
| BoltCircleCenterline | Represents a BoltCircleCenterline centerline To create or edit an instance of this class, use NXOpen::Annotations::BoltCircleCenterlineBuilder Created in NX6.0.0 |
| BoltCircleCenterlineBuilder | Represents a BoltCircleCenterlineBuilder Builder To create a new instance of this class, use NXOpen::Annotations::CenterlineCollection::CreateBoltCircleCenterlineBuilder Default values |
| BoundaryBuilder | This builder contains the boundaries that define a crosshatch pattern Created in NX6.0.0 |
| BreakSettingsBuilder | Represents a NXOpen::Annotations::BreakSettingsBuilder builder Created in NX10.0.0 |
| BusinessModifier | Represents a business modifier object |
| BusinessModifierCollection | Represents a collection of NXOpen::Annotations::BusinessModifier objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CalloutGroupBuilder | Represents a NXOpen::Annotations::CalloutGroupBuilder To create a new instance of this class, use NXOpen::Annotations::IdSymbolCollection::CreateCalloutGroupBuilder Created in NX7.5.0 |
| Centerline | Represents a drafting centerline This is an abstract class |
| Centerline2d | Represents a 2D centerline To create or edit an instance of this class, use NXOpen::Annotations::Centerline2dBuilder Created in NX6.0.0 |
| Centerline2dBuilder | Builder for creating 2D Centerline |
| Centerline2dSettingsBuilder | Represents a Builder for Centerline2dSettings |
| Centerline3d | Represents a 3D centerline To create or edit an instance of this class, use NXOpen::Annotations::Centerline3dBuilder Created in NX6.0.0 |
| Centerline3dBuilder | Builder for creating 3D Centerline |
| Centerline3dSettingsBuilder | Represents a Builder for Centerline3dSettings |
| CenterlineBuilder | Represents a Base Centerline Builder for all types of centerlines This is an abstract class, and cannot be instantiated |
| CenterlineCollection | Represents a collection of NXOpen::Annotations::Centerline objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CenterlineSettingsBuilder | Represents a Builder for Centerline Settings |
| CenterMark | Represents a center mark class To create or edit an instance of this class, use NXOpen::Annotations::CenterMarkBuilder Created in NX6.0.0 |
| CenterMarkBuilder | Builder for creating Center Mark |
| CenterMarkSettingsBuilder | Represents a Builder for CenterMark Settings |
| ChainDimension | Represents a chain dimension |
| ChamferDimension | Represents a chamfer dimension To create or edit an instance of this class, use NXOpen::Annotations::ChamferDimensionBuilder Created in NX4.0.0 |
| ChamferDimensionBuilder | Represents a NXOpen::Annotations::ChamferDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateChamferDimensionBuilder Created in NX9.0.0 |
| ChamferDimensionPreferences | Represents chamfer dimension preferences Created in NX4.0.0 |
| CharacterSpaceFactor | Specifies the standard font character space factor for each of the text types |
| CircleCenterline | Represents a CircleCenterline centerline This is an abstract class |
| CircleCenterlineBuilder | Represents a CircleCenterline Builder This is an abstract class |
| CircleCenterlineSettingsBuilder | Represents a Builder for Circle Centerline Settings Created in NX6.0.0 |
| CircularCenterline | Represents a CircularCenterline centerline To create or edit an instance of this class, use NXOpen::Annotations::CircularCenterlineBuilder Created in NX6.0.0 |
| CircularCenterlineBuilder | Represents a CircularCenterlineBuilder Builder To create a new instance of this class, use NXOpen::Annotations::CenterlineCollection::CreateCircularCenterlineBuilder Default values |
| CircularTarget | Represents a circular datum target To create or edit an instance of this class, use NXOpen::Annotations::PmiDatumTargetBuilder Created in NX4.0.0 |
| CircularTargetData | Represents circular datum target data Created in NX4.0.0 |
| CommonWorkflowBuilder | Represents a NXOpen::Annotations::CommonWorkflowBuilder Created in NX9.0.0 |
| CompanyProprietaryInformation | Represents a Company Proprietary Information To create or edit an instance of this class, use NXOpen::Annotations::CompanyProprietaryInformationBuilder Created in NX6.0.0 |
| CompanyProprietaryInformationBuilder | Represents a NXOpen::Annotations::CompanyProprietaryInformation builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateCompanyProprietaryInformationBuilder Created in NX6.0.0 |
| ComponentData | A ComponentData object can be used to query the components of an annotation |
| CompoundDatumReferenceBuilder | Represents a NXOpen::Annotations::CompoundDatumReferenceBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateCompoundDatumReferenceBuilder Created in NX6.0.0 |
| ConcentricCircleDimension | Represents a concentric circle dimension To create or edit an instance of this class, use NXOpen::Annotations::ThicknessDimensionBuilder Created in NX4.0.0 |
| CoordinateNote | Represents a Coordinate Note To create or edit an instance of this class, use NXOpen::Annotations::CoordinateNoteBuilder Created in NX6.0.0 |
| CoordinateNoteBuilder | Represents a NXOpen::Annotations::CoordinateNote builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateCoordinateNoteBuilder Default values |
| CurveLengthDimensionBuilder | Represents a NXOpen::Annotations::ArcLengthDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateCurveLengthDimensionBuilder Created in NX9.0.0 |
| CustomerValueBusinessModifier | Represents business modifier that applies customer values such as CTQ (Critical To Quality), KC (Key Characteristic) to a PMI |
| CustomerValueBusinessModifierBuilder | Represents a NXOpen::Annotations::CustomerValueBusinessModifier builder To create a new instance of this class, use NXOpen::Annotations::BusinessModifierCollection::CreateCustomerValueBusinessModifierBuilder Created in NX6.0.0 |
| CustomSymbol | Represents a custom symbol To create or edit an instance of this class, use NXOpen::Annotations::DraftingCustomSymbolBuilder Created in NX4.0.0 |
| CustomSymbolCollection | Represents a collection of NXOpen::Annotations::BaseCustomSymbol objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CustomSymbolData | Represents custom symbol data |
| CustomSymbolTextData | Represents custom symbol text data |
| CutSheetBuilder | Builder for Formboard cut sheet functionality used in formboard |
| CuttingPlaneSymbol | Represents a Cutting Plane Symbol Created with LightweightSection Created in NX9.0.0 |
| CuttingPlaneSymbolBuilder | Represents a NXOpen::Annotations::CuttingPlaneSymbolBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| CylindricalDimension | Represents a cylindrical dimension To create or edit an instance of this class, use NXOpen::Annotations::LinearDimensionBuilder Created in NX4.0.0 |
| Datum | Represents a datum To create or edit an instance of this class, use NXOpen::Annotations::PmiDatumFeatureSymbolBuilder Created in NX4.0.0 |
| DatumData | Represents datum data Created in NX4.0.0 |
| DatumFeatureSymbolBuilder | Represents a Base Datum Feature Symbol Builder for all types of datum feature symbols This is an abstract class, and cannot be instantiated |
| DatumReference | Represents a datum reference Created in NX4.0.0 |
| DatumReferenceBuilder | Represents a NXOpen::Annotations::DatumReferenceBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateEmptyDatumReferenceBuilder Created in NX6.0.0 |
| DatumReferenceBuilderList | Represents a list of objects |
| DatumTarget | Represents a datum target To create or edit an instance of this class, use NXOpen::Annotations::PmiDatumTargetBuilder Created in NX4.0.0 |
| DatumTargetBuilder | Represents a Datum target Builder This is an abstract class, and cannot be instantiated |
| DatumTargetCollection | Represents a collection of NXOpen::Annotations::DatumTarget objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DatumTargetData | Represents datum target data Created in NX4.0.0 |
| DefineTitleBlockBuilder | Represents a NXOpen::Annotations::DefineTitleBlockBuilder |
| DiameterDimension | Represents a diameter dimension To create or edit an instance of this class, use NXOpen::Annotations::RadialDimensionBuilder Created in NX4.0.0 |
| DiameterRadiusPreferences | Represents diameter and radius preferences Created in NX4.0.0 |
| Dimension | Represents a dimension Abstract class Created in NX3.0.0 |
| DimensionCollection | Represents a collection of NXOpen::Annotations::Dimension objects This is an collection class |
| iterator | Iterator for accessing the contents of the collection |
| DimensionData | Represents dimension data Created in NX4.0.0 |
| DimensionMeasurementBuilder | Represents a NXOpen::Annotations::DimensionMeasurementBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| DimensionPreferences | Represents dimension preferences Created in NX4.0.0 |
| DimensionSet | Represents a dimension set This is an abstract class |
| DimensionSetBuilder | Represents a NXOpen::Annotations::DimensionSetBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| DimensionSetCollection | Represents a collection of NXOpen::Annotations::DimensionSet objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DimensionStyleBuilder | Represents a NXOpen::Annotations::DimensionStyleBuilder |
| DimensionWorkflowBuilder | Represents a Annotations WorkFlowBuilder |
| DisplayStyleBuilder | Represents a NXOpen::Annotations::DisplayStyleBuilder |
| DraftingAid | Represents a drafting aid This is an abstract class |
| DraftingArbitraryTarget | Represents a drafting arbitrary datum target |
| DraftingCustomSymbolBuilder | Represents builder for Drafting Custom Symbol To create a new instance of this class, use NXOpen::Annotations::CustomSymbolCollection::CreateDraftingCustomSymbolBuilder Created in NX7.5.0 |
| DraftingDatum | Represents a datum To create or edit an instance of this class, use NXOpen::Annotations::DraftingDatumFeatureSymbolBuilder Created in NX5.0.0 |
| DraftingDatumFeatureSymbolBuilder | Datum feature symbol builder To create a new instance of this class, use NXOpen::Annotations::GdtDatumCollection::CreateDraftingDatumFeatureSymbolBuilder Created in NX6.0.0 |
| DraftingDatumTarget | Represents a datum target To create or edit an instance of this class, use NXOpen::Annotations::DraftingDatumTargetBuilder Created in NX5.0.0 |
| DraftingDatumTargetBuilder | Represents a NXOpen::Annotations::DraftingDatumTargetBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateDraftingDatumTargetBuilder Default values |
| DraftingDatumTargetCollection | Represents a collection of NXOpen::Annotations::DraftingDatumTarget objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX8.0.1 |
| iterator | Iterator for accessing the contents of the collection |
| DraftingFcf | Represents an FCF To create or edit an instance of this class, use NXOpen::Annotations::DraftingFeatureControlFrameBuilder Created in NX4.0.0 |
| DraftingFeatureControlFrameBuilder | Represents a NXOpen::Annotations::DraftingFeatureControlFrameBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateDraftingFeatureControlFrameBuilder Default values |
| DraftingImage | Represents a drafting image To create or edit an instance of this class, use NXOpen::Annotations::DraftingImageBuilder Created in NX9.0.0 |
| DraftingImageBuilder | Represents a NXOpen.Annotations.DraftingImageBuilder class |
| DraftingImageCollection | Represents a collection of NXOpen::Annotations::DraftingImage objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DraftingLineTarget | Represents a drafting line datum target To create or edit an instance of this class, use NXOpen::Annotations::DraftingDatumTargetBuilder Created in NX4.0.0 |
| DraftingNoteBuilder | Represents a NXOpen::Annotations::Note builder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateDraftingNoteBuilder Default values |
| DraftingPointTarget | Represents drafting point datum target To create or edit an instance of this class, use NXOpen::Annotations::DraftingDatumTargetBuilder Created in NX4.0.0 |
| DraftingSurfaceFinish | Represents a Drafting Surface Finish To create or edit an instance of this class, use NXOpen::Annotations::DraftingSurfaceFinishBuilder Created in NX7.5.0 |
| DraftingSurfaceFinishBuilder | Represents a NXOpen::Annotations::DraftingSurfaceFinish builder To create a new instance of this class, use NXOpen::Annotations::DraftingSurfaceFinishCollection::CreateDraftingSurfaceFinishBuilder Created in NX7.5.0 |
| DraftingSurfaceFinishCollection | Represents a collection of NXOpen::Annotations::DraftingSurfaceFinish objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| DrawingFormatTitleBuilder | Represents a NXOpen::Annotations::DrawingFormatTitleBuilder Created in NX9.0.0 |
| DrivingValueBuilder | Created in NX9.0.0 |
| EditLeaderBuilder | Represents a builder that provides an interface to adding and editing leaders to table entities To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateEditLeaderBuilder Created in NX6.0.1 |
| EditSettingsBuilder | Edit settings builder To create a new instance of this class, use NXOpen::Drafting::SettingsManager::CreateAnnotationEditSettingsBuilder Created in NX9.0.0 |
| EditSymbolDisplayBuilder | Represents a EditSymbolPieces builder To create a new instance of this class, use NXOpen::Annotations::CustomSymbolCollection::EditSymbolDisplayBuilder Default values |
| EditTitleBlockBuilder | Represents a NXOpen::Annotations::EditTitleBlockBuilder builder To create a new instance of this class, use NXOpen::Annotations::TitleBlockCollection::CreateEditTitleBlockBuilder Created in NX8.0.0 |
| EnterpriseIdentification | Represents a Enterprise Identification To create or edit an instance of this class, use NXOpen::Annotations::EnterpriseIdentificationBuilder Created in NX6.0.0 |
| EnterpriseIdentificationBuilder | Represents a NXOpen::Annotations::EnterpriseIdentification builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateEnterpriseIdentificationBuilder Created in NX6.0.0 |
| ExportControl | Represents a Export Control To create or edit an instance of this class, use NXOpen::Annotations::ExportControlBuilder Created in NX6.0.0 |
| ExportControlBuilder | Represents a NXOpen::Annotations::ExportControl builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateExportControlBuilder Created in NX6.0.0 |
| Fcf | Represents an FCF To create or edit an instance of this class, use NXOpen::Annotations::PmiFeatureControlFrameBuilder Created in NX4.0.0 |
| FcfCollection | Represents a collection of NXOpen::Annotations::Fcf objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FcfData | Represents FCF data Created in NX4.0.0 |
| FcfDatumReference | Represents a NXOpen::Annotations::FcfDatumReference Created in NX6.0.0 |
| FcfFrame | Represents an FCF frame Created in NX4.0.0 |
| FcfFrameData | Represents FCF frames data Created in NX4.0.0 |
| FeatureControlFrameBuilder | Represents a NXOpen::Annotations::FeatureControlFrameBuilder This is an abstract class, and cannot be instantiated |
| FeatureControlFrameData | Represents a NXOpen::Annotations::FeatureControlFrameData Created in NX6.0.0 |
| FeatureControlFrameDataBuilder | Represents a FeatureControlFrameDataBuilder |
| FeatureControlFrameDataBuilderList | Represents a list of objects |
| FeatureControlFrameIndicatorBuilder | Represents a FcfIndicatorBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateFeatureControlFrameIndicatorBuilder Created in NX12.0.0 |
| FeatureControlFrameIndicatorBuilderList | Represents a list of objects |
| FeatureIdBusinessModifier | Represents buiness modifier that indicates a featire identification PMI object |
| FeatureIdBusinessModifierBuilder | Represents a NXOpen::Annotations::FeatureIdBusinessModifier builder To create a new instance of this class, use NXOpen::Annotations::BusinessModifierCollection::CreateFeatureIdBusinessModifierBuilder Created in NX6.0.0 |
| FoldedRadiusDimension | Represents a folded radius dimension To create or edit an instance of this class, use NXOpen::Annotations::RadialDimensionBuilder Created in NX4.0.0 |
| ForeshorteningSymbolBuilder | Represents a NXOpen::Annotations::ForeshorteningSymbolBuilder builder There is no KF creator for this class |
| ForeshorteningSymbolSettingsBuilder | Represents a NXOpen::Annotations::ForeshorteningSymbolSettingsBuilder builder Created in NX10.0.0 |
| FrameBar | Represents a frame bar class To create or edit an instance of this class, use NXOpen::Annotations::FrameBarBuilder Created in NX8.0.0 |
| FrameBarBuilder | Represents a NXOpen::Annotations::FrameBarBuilder |
| FrameBarCollection | Represents a collection of NXOpen::Annotations::FrameBar objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FrameBarElementStyleBuilder | Represents a NXOpen::Annotations::FrameBarElementStyleBuilder |
| FrameBarPreferences | Represents frame bar preferences |
| FrameBarStyleBuilder | Represents a NXOpen::Annotations::FrameBarStyleBuilder |
| Gdt | Represents a Geometric Dimensioning and Tolerancing symbol This is an abstract class, and cannot be instantiated Created in NX3.0.0 |
| GdtCollection | Represents a collection of GDTs To obtain an instance of this class, refer to NXOpen::Part Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| GdtDatumCollection | Represents a collection of NXOpen::Annotations::Datum objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| GeneralArcLengthDimension | Represents a arc length dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralChamferDimension | Represents a chamfer dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralConcentricCircleDimension | Represents a concentric circle dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralCustomSymbol | Represents a general custom symbol Created in NX7.0.0 |
| GeneralCylindricalDimension | Represents a horizontal dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralDiameterDimension | Represents a horizontal dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralFoldedRadiusDimension | Represents a folded radius dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralHoleDimension | Represents a hole dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralHorizontalDimension | Represents a horizontal dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralLabel | Represents a General Label To obtain an instance of this class use NXOpen::Annotations::LabelCollection Created in NX7.5.0 |
| GeneralMajorAngularDimension | Represents a major angular dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralMinorAngularDimension | Represents a minor angular dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralNote | Represents a General Note To create or edit an instance of this class, use NXOpen::Annotations::GeneralNoteBuilder Created in NX6.0.0 |
| GeneralNoteBuilder | Represents a NXOpen::Annotations::GeneralNote builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateGeneralNoteBuilder Created in NX6.0.0 |
| GeneralParallelDimension | Represents a parallel dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralPerpendicularDimension | Represents a horizontal dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralRadiusDimension | Represents a radius dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GeneralVerticalDimension | Represents a horizontal dimension To obtain an instance of this class use NXOpen::Annotations::DimensionCollection Created in NX6.0.0 |
| GenericNote | Represents a Generic Note To obtain an instance of this class use NXOpen::Annotations::NoteCollection Created in NX6.0.0 |
| GeodesicDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateGeodesicDimensionBuilder Created in NX10.0.0 |
| GovernmentSecurityInformation | Represents a Government Security Information To create or edit an instance of this class, use NXOpen::Annotations::GovernmentSecurityInformationBuilder Created in NX6.0.0 |
| GovernmentSecurityInformationBuilder | Represents a NXOpen::Annotations::GovernmentSecurityInformation builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateGovernmentSecurityInformationBuilder Created in NX6.0.0 |
| Hatch | Represents a crosshatch or area fill To create or edit an instance of this class, use NXOpen::Annotations::HatchBuilder Created in NX6.0.0 |
| HatchBuilder | This class is used to construct the crosshatching that lies within a boundary |
| HatchCollection | Represents a collection of NXOpen::Annotations::Hatch objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| HatchFillSettingsBuilder | This class is used to construct the Crosshatch and area Fill setting block |
| HatchStyleBuilder | Represents a NXOpen::Annotations::HatchStyleBuilder |
| HoleCalloutSettingsBuilder | Represents a NXOpen::Annotations::HoleCalloutSettingsBuilder , this builder contains list(s) of parameter(s) for feature(s) |
| HoleDimension | Represents a hole dimension To create or edit an instance of this class, use NXOpen::Annotations::RadialDimensionBuilder Created in NX4.0.0 |
| HoleTable | Represents a NXOpen::Annotations::HoleTable |
| HoleTableBuilder | Represents a NXOpen::Annotations::HoleTableBuilder |
| HoleTableCollection | Represents a collection of NXOpen::Annotations::HoleTable objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| HoleTableSettingsContentBuilder | Represents a NXOpen::Annotations::HoleTableSettingsContentBuilder Created in NX9.0.0 |
| HoleTableSettingsFormatBuilder | Represents a NXOpen::Annotations::HoleTableSettingsFormatBuilder Created in NX9.0.0 |
| HoleTableSettingsHoleFiltersBuilder | Represents a NXOpen::Annotations::HoleTableSettingsHoleFiltersBuilder Created in NX9.0.0 |
| HoleTableSettingsLabelBuilder | Represents a NXOpen::Annotations::HoleTableSettingsLabelBuilder Created in NX9.0.0 |
| HoleTableSettingsWorkflowBuilder | Represents a NXOpen::Annotations::HoleTableSettingsWorkflowBuilder Created in NX9.0.0 |
| HorizontalDimension | Represents a horizontal dimension To create or edit an instance of this class, use NXOpen::Annotations::LinearDimensionBuilder Created in NX4.0.0 |
| HorizontalOrdinateDimension | Represents a horizontal ordinate dimension To create or edit an instance of this class, use NXOpen::Annotations::OrdinateDimensionBuilder Created in NX4.0.0 |
| HorizontalOrdinateMargin | Represents a horizontal ordinate margin Created in NX4.0.0 |
| IAngularTolerance | Represents an object that has angular tolerance Created in NX4.0.0 |
| IAppendedText | Represents an object that has appended text Created in NX4.0.0 |
| IArbitraryTarget | Represents interface class for arbitrary datum target areas Created in NX5.0.0 |
| ICircularTarget | Represents interface class for a circular datum target Created in NX4.0.0 |
| IContainer | Represents an object that contains other objects Created in NX4.0.0 |
| IDatum | Represents interface class for a datum Created in NX4.0.0 |
| IDatumTarget | Represents interface class for a datum target Created in NX4.0.0 |
| IdSymbol | Represents an ID symbol To create or edit an instance of this class, use NXOpen::Annotations::IdSymbolBuilder Created in NX5.0.0 |
| IdSymbolBuilder | Represents a NXOpen::Annotations::IdSymbol builder To create a new instance of this class, use NXOpen::Annotations::IdSymbolCollection::CreateIdSymbolBuilder Default values |
| IdSymbolCollection | Represents a collection of NXOpen::Annotations::IdSymbol objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| IFcf | Represents interface class for a feature control frame Created in NX4.0.0 |
| ILinearTolerance | Represents an object that has linear tolerance Created in NX4.0.0 |
| ILineTarget | Represents interface class for line datum target Created in NX4.0.0 |
| ImportAutocadBlockBuilder | Represents a builder allowing import of AutoCAD blocks |
| ImportSymbolBuilder | Represents a builder allowing import of one or many foreign symbols |
| IntersectionSymbol | Represents a intersection symbol To create or edit an instance of this class, use NXOpen::Annotations::IntersectionSymbolBuilder Created in NX6.0.0 |
| IntersectionSymbolBuilder | Represents a NXOpen::Annotations::IntersectionSymbol builder To create a new instance of this class, use NXOpen::Annotations::IntersectionSymbolCollection::CreateIntersectionSymbolBuilder Default values |
| IntersectionSymbolCollection | Represents a collection of NXOpen::Annotations::IntersectionSymbol objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| IPmi | Represents an object that has PMI(Product and Manufacturing Information) data |
| IPointTarget | Represents interface class for a point datum target Created in NX4.0.0 |
| IRectangularTarget | Represents interface class for a rectangular datum target Created in NX4.0.0 |
| ISlotDimension | Represents a slot dimension Created in NX9.0.0 |
| Label | Represents a label To create an instance of this class NXOpen::Annotations::AnnotationManager Created in NX3.0.0 |
| LabelCollection | Represents a collection of labels To obtain an instance of this class, refer to NXOpen::Part Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LabelData | Represents label data Created in NX4.0.0 |
| LeaderBuilder | Represents a NXOpen::Annotations::LeaderBuilder |
| LeaderBundle | Represents the data for all the leaders of an annotation Created in NX3.0.0 |
| LeaderData | Represents a NXOpen::Annotations::LeaderData |
| LeaderDataList | Represents a list of objects |
| Lettering | Specifies lettering data |
| LetteringPreferences | Represents lettering preferences |
| LetteringStyleBuilder | Represents a NXOpen::Annotations::LetteringStyleBuilder |
| LightweightSection | Represents a PMI Lightweight Section To create or edit an instance of this class, use NXOpen::Annotations::LightweightSectionBuilder Created in NX7.5.0 |
| LightweightSectionBuilder | Represents a NXOpen::Annotations::LightweightSection builder To create a new instance of this class, use NXOpen::Annotations::PmiLightweightSectionCollection::CreateLightweightSectionBuilder Default values |
| LightweightSectionView | Represents a PMI Lightweight Section View Created with LightweightSection Created in NX7.5.0 |
| LineAndArrowPreferences | Represents line and arrow preferences Created in NX3.0.0 |
| LinearDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateLinearDimensionBuilder Created in NX9.0.0 |
| LineArrowStyleBuilder | Represents a NXOpen::Annotations::LineArrowStyleBuilder |
| LinearTolerance | Represents linear tolerance Created in NX4.0.0 |
| LineCfw | Specifies color, font, and width |
| LineComponent | Represents a single line in an annotation and can be queried for information about that line |
| LineTarget | Represents a line datum target To create or edit an instance of this class, use NXOpen::Annotations::PmiDatumTargetBuilder Created in NX4.0.0 |
| LineWeld | Represents a line weld To create or edit an instance of this class, use NXOpen::Annotations::LineWeldBuilder Created in NX4.0.0 |
| LineWeldBuilder | Represents a NXOpen::Annotations::LineWeldBuilder To create a new instance of this class, use NXOpen::Annotations::WeldCollection::CreateLineWeldBuilder Default values |
| LineWeldData | Represents line weld data Created in NX4.0.0 |
| LineWeldDataBuilder | Represents a NXOpen::Annotations::LineWeldDataBuilder Created in NX6.0.0 |
| LineWeldSideData | Represents line weld side data Created in NX4.0.0 |
| ListBusinessModifier | Represents a base class for list based business modifiers Created in NX4.0.0 |
| LocatorDesignator | Represents a Locator Designator To create or edit an instance of this class, use NXOpen::Annotations::LocatorDesignatorBuilder Created in NX6.0.0 |
| LocatorDesignatorBuilder | Represents a NXOpen::Annotations::LocatorDesignator builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateLocatorDesignatorBuilder Created in NX6.0.0 |
| MajorAngularDimension | Represents a major angular dimension To create or edit an instance of this class, use NXOpen::Annotations::MajorAngularDimensionBuilder Created in NX4.0.0 |
| MajorAngularDimensionBuilder | Represents a NXOpen::Annotations::AngularDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateMajorAngularDimensionBuilder Created in NX9.0.0 |
| MasterCustomSymbol | Represents a custom symbol Created in NX4.0.0 |
| MasterCustomSymbolData | Represents master custom symbol data |
| MasterSymbol | Represents a part symbol folder To create or edit an instance of this class, use NXOpen::Annotations::MasterSymbolBuilder Created in NX7.5.0 |
| MasterSymbolBuilder | Represents a Builder for MasterSymbol functionality To create a new instance of this class, use NXOpen::Annotations::CustomSymbolCollection::CreateMasterSymbolBuilder Default values |
| MasterSymbolListItemBuilder | Represents a NXOpen::Annotations::MasterSymbolListItemBuilder To create a new instance of this class, use NXOpen::Annotations::CustomSymbolCollection::CreateMasterSymbolListItemBuilder Created in NX7.5.0 |
| MasterSymbolListItemBuilderList | Represents a list of objects |
| MaterialSpecification | Represents a Material Specification To create or edit an instance of this class, use NXOpen::Annotations::MaterialSpecificationBuilder Created in NX6.0.0 |
| MaterialSpecificationBuilder | Represents a NXOpen::Annotations::MaterialSpecification builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateMaterialSpecificationBuilder Created in NX6.0.0 |
| MinorAngularDimension | Represents a minor angular dimension To create or edit an instance of this class, use NXOpen::Annotations::MinorAngularDimensionBuilder Created in NX4.0.0 |
| MinorAngularDimensionBuilder | Represents a NXOpen::Annotations::AngularDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateMinorAngularDimensionBuilder Created in NX9.0.0 |
| NarrowDimensionData | Specifies the narrow dimension preferences |
| NarrowDimensionPreferences | Represents narrow dimension preferences Created in NX4.0.0 |
| Note | Represents a Note To create or edit an instance of this class, use NXOpen::Annotations::DraftingNoteBuilder Created in NX3.0.0 |
| NoteBase | Represents a base class for notes and labels This is an abstract class Created in NX3.0.0 |
| NoteCollection | Represents a collection of notes To obtain an instance of this class, refer to NXOpen::Part Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| NoteData | Represents note data Created in NX4.0.0 |
| OffsetCenterPoint | Represents a offset center point To create or edit an instance of this class, use NXOpen::Annotations::OffsetCenterPointBuilder Created in NX6.0.0 |
| OffsetCenterPointBuilder | Represents a NXOpen::Annotations::OffsetCenterPoint builder To create a new instance of this class, use NXOpen::Annotations::OffsetCenterPointCollection::CreateOffsetCenterPointBuilder Default values |
| OffsetCenterPointCollection | Represents a collection of NXOpen::Annotations::OffsetCenterPoint objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| OrdinateBaselineBuilder | Represents a builder for an ordinate baseline This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| OrdinateDimension | Represents an ordinate dimension Abstract class Created in NX4.0.0 |
| DoglegPreferences | Specifies the ordinate dogleg preferences |
| OrdinateDimensionBuilder | Represents a NXOpen::Annotations::OrdinateDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateOrdinateDimensionBuilder Created in NX9.0.0 |
| OrdinateDimensionPreferences | Represents ordinate dimension preferences Created in NX4.0.0 |
| OrdinateMargin | Represents an ordinate margin |
| OrdinateMarginCollection | Represents a collection of NXOpen::Annotations::OrdinateMargin To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| OrdinateOriginDimension | Represents an ordinate origin dimension There is no KF creator for this class |
| OrdinateStyleBuilder | Represents a NXOpen::Annotations::OrdinateStyleBuilder |
| OriginBuilder | Represents a NXOpen::Annotations::OriginBuilder This is a sub-builder class and cannot be directly instantiated Created in NX6.0.0 |
| ParallelDimension | Represents a parallel dimension To create or edit an instance of this class, use NXOpen::Annotations::LinearDimensionBuilder Created in NX4.0.0 |
| PartIdentification | Represents a Part Identification To create or edit an instance of this class, use NXOpen::Annotations::PartIdentificationBuilder Created in NX6.0.0 |
| PartIdentificationBuilder | Represents a NXOpen::Annotations::PartIdentification builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePartIdentificationBuilder Created in NX6.0.0 |
| PartsList | Represents a Annotations.PartsList |
| PartsListBuilder | Represents a NXOpen::Annotations::PartsListBuilder |
| PartsListCollection | Represents a collection of Annotations::PartsList objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX1847.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PartSymbolFolder | Represents a part symbol folder To create or edit an instance of this class, use NXOpen::Annotations::PartSymbolFolderBuilder Created in NX7.5.0 |
| PartSymbolFolderBuilder | Represents a NXOpen::Annotations::PartSymbolFolderBuilder |
| PartSymbolFolderCollection | Represents a collection of NXOpen::Annotations::PartSymbolFolder objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| PerpendicularDimension | Represents a perpendicular dimension To create or edit an instance of this class, use NXOpen::Annotations::LinearDimensionBuilder Created in NX4.0.0 |
| PinListBuilder | Builder for Formboard pin list functionality used in formboard |
| PlaneBuilder | Represents a NXOpen::Annotations::PlaneBuilder object |
| Pmi | Represents a PMI(Product and Manufacturing Information) object |
| PmiAngularDimension | Represents a PMI angular dimension Abstract class Created in NX9.0.0 |
| PmiAngularDimensionBuilder | Represents a NXOpen::Annotations::AngularDimension builder This is an abstract class and cannot be instantiated |
| PmiArcLengthDimension | Represents a PMI arc length dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiCurveLengthDimensionBuilder Created in NX4.0.0 |
| PmiAttribute | Represents a Pmi Attribute To create or edit an instance of this class, use NXOpen::Annotations::PmiAttributeBuilder Created in NX6.0.0 |
| PmiAttributeBuilder | Represents a NXOpen::Annotations::PmiAttribute builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiAttributeBuilder Created in NX6.0.0 |
| PmiAttributeCollection | Represents a collection of NXOpen::Annotations::PmiAttribute objects |
| iterator | Iterator for accessing the contents of the collection |
| PmiAttributeValue | Represents a PMI Attribute Value This is an abstract class |
| PmiAttributeValueInteger | Represents a PMI Attribute Integer Value To create or edit an instance of this class, use NXOpen::Annotations::PmiAttributeValueIntegerBuilder Created in NX6.0.0 |
| PmiAttributeValueIntegerBuilder | Represents a NXOpen::Annotations::PmiAttributeValueInteger builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiAttributeValueIntegerBuilder Created in NX6.0.0 |
| PmiAttributeValueList | Represents a PMI Attribute List Value To create or edit an instance of this class, use NXOpen::Annotations::PmiAttributeValueListBuilder Created in NX6.0.0 |
| PmiAttributeValueListBuilder | Represents a NXOpen::Annotations::PmiAttributeValueList builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiAttributeValueListBuilder Created in NX6.0.0 |
| PmiAttributeValueMultipleString | Represents a PMI Attribute MultipleString Value To create or edit an instance of this class, use NXOpen::Annotations::PmiAttributeValueMultipleStringBuilder Created in NX6.0.0 |
| PmiAttributeValueMultipleStringBuilder | Represents a NXOpen::Annotations::PmiAttributeValueMultipleString builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiAttributeValueMultipleStringBuilder Created in NX6.0.0 |
| PmiAttributeValueNumber | Represents a PMI Attribute Number Value To create or edit an instance of this class, use NXOpen::Annotations::PmiAttributeValueNumberBuilder Created in NX6.0.0 |
| PmiAttributeValueNumberBuilder | Represents a NXOpen::Annotations::PmiAttributeValueNumber builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiAttributeValueNumberBuilder Created in NX6.0.0 |
| PmiAttributeValueString | Represents a PMI Attribute String Value To create or edit an instance of this class, use NXOpen::Annotations::PmiAttributeValueStringBuilder Created in NX6.0.0 |
| PmiAttributeValueStringBuilder | Represents a NXOpen::Annotations::PmiAttributeValueString builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiAttributeValueStringBuilder Created in NX6.0.0 |
| PmiAttributeValueUrl | Represents a PMI Attribute Url Value To create or edit an instance of this class, use NXOpen::Annotations::PmiAttributeValueUrlBuilder Created in NX6.0.0 |
| PmiAttributeValueUrlBuilder | Represents a NXOpen::Annotations::PmiAttributeValueUrl builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiAttributeValueUrlBuilder Created in NX6.0.0 |
| PmiBaselineDimension | Represents a PMI baseline dimension |
| PmiBoltCircleCenterline | Represents a PMI Bolt Circle Centerline class To create or edit an instance of this class, use NXOpen::Annotations::PmiBoltCircleCenterlineBuilder Created in NX12.0.0 |
| PmiBoltCircleCenterlineBuilder | Builder for creating or editing PMI Bolt Circle Centerline To create a new instance of this class, use NXOpen::Annotations::CenterlineCollection::CreatePmiBoltCircleCenterlineBuilder Default values |
| PmiCenterline3d | Represents a Pmi 3D centerline To create or edit an instance of this class, use NXOpen::Annotations::PmiCenterline3dBuilder Created in NX7.5.0 |
| PmiCenterline3dBuilder | Builder for creating Pmi 3D Centerline |
| PmiCenterMark | Represents a PMI Center Mark class To create or edit an instance of this class, use NXOpen::Annotations::PmiCenterMarkBuilder Created in NX7.5.0 |
| PmiCenterMarkBuilder | Builder for creating PMI Center Mark |
| PmiChainDimension | Represents a PMI chain dimension |
| PmiChamferDimension | Represents a PMI chamfer dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiChamferDimensionBuilder Created in NX4.0.0 |
| PmiChamferDimensionBuilder | Represents a NXOpen::Annotations::PmiChamferDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiChamferDimensionBuilder Created in NX9.0.0 |
| PmiCollection | Represents a collection of NXOpen::Annotations::Pmi objects |
| iterator | Iterator for accessing the contents of the collection |
| PmiConcentricCircleDimension | Represents a PMI concentric circle dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiThicknessDimensionBuilder Created in NX4.0.0 |
| PmiCurveLengthDimensionBuilder | Represents a NXOpen::Annotations::PmiArcLengthDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiCurveLengthDimensionBuilder Created in NX9.0.0 |
| PmiCustomSymbol | Represents a PMI custom symbol To create or edit an instance of this class, use NXOpen::Annotations::PmiCustomSymbolBuilder Created in NX4.0.0 |
| PmiCustomSymbolBuilder | Represents builder for PMI Custom Symbol To create a new instance of this class, use NXOpen::Annotations::CustomSymbolCollection::CreatePmiCustomSymbolBuilder Created in NX7.5.0 |
| PmiCylindricalDimension | Represents a PMI cylindrical dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiLinearDimensionBuilder Created in NX4.0.0 |
| PmiData | Represents PMI(Product and Manufacturing Information) data Created in NX4.0.0 |
| PmiDatumFeatureSymbolBuilder | Datum feature symbol builder To create a new instance of this class, use NXOpen::Annotations::GdtDatumCollection::CreatePmiDatumFeatureSymbolBuilder Created in NX6.0.0 |
| PmiDatumTargetBuilder | Represents a NXOpen::Annotations::PmiDatumTargetBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreatePmiDatumTargetBuilder Default values |
| PmiDiameterDimension | Represents a PMI diameter dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiRadialDimensionBuilder Created in NX4.0.0 |
| PMIExplicitOrderBuilder | This is the NXOpen::Annotations::PMIExplicitOrderBuilder for the explicit order To create a new instance of this class, use NXOpen::Annotations::PmiManager::CreateExplicitOrderBuilder Created in NX9.0.0 |
| PmiFeatureControlFrameBuilder | Represents a NXOpen::Annotations::PmiFeatureControlFrameBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreatePmiFeatureControlFrameBuilder Created in NX6.0.0 |
| PmiFilter | Represents a base class for a PMI filter |
| PmiFilterByPart | Represents a PMI filter defined by a set of parts |
| PmiFilterByType | Represents a PMI filter defined by a set of types |
| PmiFilterByView | Represents a PMI filter defined by a set of views |
| PmiFilterCollection | Represents the collection of all PMI filters in the part |
| iterator | Iterator for accessing the contents of the collection |
| PmiFoldedRadiusDimension | Represents a PMI folded radius dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiRadialDimensionBuilder Created in NX4.0.0 |
| PmiGeneralSetupDisplayBuilder | Represents a NXOpen.Annotations.PmiGeneralSetupDisplayBuilder |
| PmiGeneralSetupEffectivityBuilder | Represents a NXOpen.Annotations.PmiGeneralSetupEffectivityBuilder Created in NX1847.0.0 |
| PmiGeneralSetupGeneralBuilder | Represents a NXOpen.Annotations.PmiGeneralSetupGeneralBuilder |
| PmiGeneralSetupParallelToScreenBuilder | Represents a NXOpen.Annotations.PmiGeneralSetupParallelToScreenBuilder Created in NX1847.0.0 |
| PmiHoleDimension | Represents a PMI hole dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiRadialDimensionBuilder Created in NX5.0.0 |
| PmiHorizontalDimension | Represents a PMI horizontal dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiLinearDimensionBuilder Created in NX4.0.0 |
| PmiHorizontalOrdinateDimension | Represents a PMI horizontal ordinate dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiOrdinateDimensionBuilder Created in NX4.0.0 |
| PmiInteger | Represents a Pmi Integer To create or edit an instance of this class, use NXOpen::Annotations::PmiIntegerBuilder Created in NX6.0.0 |
| PmiIntegerBuilder | Represents a NXOpen::Annotations::PmiInteger builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiIntegerBuilder Default values |
| PmiLabel | Represents a PMI label |
| PmiLightweightSectionCollection | Represents a collection of NXOpen::Annotations::LightweightSection objects To obtain an instance of this class, refer to NXOpen::Annotations::PmiManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| PmiLinearDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiLinearDimensionBuilder Created in NX9.0.0 |
| PmiLineWeld | Represents a PMI line weld To create or edit an instance of this class, use NXOpen::Annotations::PmiLineWeldBuilder Created in NX4.0.0 |
| PmiLineWeldBuilder | Represents a NXOpen::Annotations::PmiLineWeld builder To create a new instance of this class, use NXOpen::Annotations::WeldCollection::CreatePmiLineWeldBuilder Default values |
| PmiMajorAngularDimension | Represents a PMI major angular dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiMajorAngularDimensionBuilder Created in NX4.0.0 |
| PmiMajorAngularDimensionBuilder | Represents a NXOpen::Annotations::AngularDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiMajorAngularDimensionBuilder Created in NX9.0.0 |
| PmiManager | Represents an object that manages PMI objects |
| PmiMinorAngularDimension | Represents a PMI minor angular dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiMinorAngularDimensionBuilder Created in NX4.0.0 |
| PmiMinorAngularDimensionBuilder | Represents a NXOpen::Annotations::AngularDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiMinorAngularDimensionBuilder Created in NX9.0.0 |
| PmiNote | Represents a PMI note To create or edit an instance of this class, use NXOpen::Annotations::PmiNoteBuilder Created in NX4.0.0 |
| PmiNoteBuilder | Represents a NXOpen::Annotations::Note builder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreatePmiNoteBuilder Created in NX6.0.0 |
| PmiNumber | Represents a Pmi Number To create or edit an instance of this class, use NXOpen::Annotations::PmiNumberBuilder Created in NX6.0.0 |
| PmiNumberBuilder | Represents a NXOpen::Annotations::PmiNumber builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiNumberBuilder Default values |
| PmiOrdinateDimensionBuilder | Represents a NXOpen::Annotations::OrdinateDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiOrdinateDimensionBuilder Created in NX9.0.0 |
| PmiOrdinateOriginDimension | Represents a PMI ordinate origin dimension There is no KF creator for this class |
| PmiParallelDimension | Represents a PMI parallel dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiLinearDimensionBuilder Created in NX4.0.0 |
| PmiPerpendicularDimension | Represents a PMI perpendicular dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiLinearDimensionBuilder Created in NX4.0.0 |
| PmiPreferences | Represents line and arrow preferences Created in NX4.0.0 |
| PmiPreferencesBuilder | Represents a NXOpen.Annotations.PmiPreferencesBuilder builder To create a new instance of this class, use NXOpen::Annotations::PmiSettingsManager::CreatePreferencesBuilder Created in NX1847.0.0 |
| PmiRadialDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiRadialDimensionBuilder Created in NX9.0.0 |
| PmiRadiusDimension | Represents a PMI radius dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiRadialDimensionBuilder Created in NX4.0.0 |
| PmiRapidDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiRapidDimensionBuilder Created in NX9.0.0 |
| PmiRegionCollection | Represents a collection of NXOpen::Annotations::Region objects To obtain an instance of this class, refer to NXOpen::Annotations::PmiManager Created in NX6.0.2 |
| iterator | Iterator for accessing the contents of the collection |
| PmiSectionViewCuttingPlaneSymbolBuilder | Represents a NXOpen.Annotations.PmiSectionViewCuttingPlaneSymbolBuilder |
| PmiSectionViewViewBuilder | Represents a NXOpen.Annotations.PmiSectionViewViewBuilder |
| PmiSettingsManager | Represents an object that manages PMI objects |
| PmiString | Represents a Pmi String To create or edit an instance of this class, use NXOpen::Annotations::PmiStringBuilder Created in NX6.0.0 |
| PmiStringBuilder | Represents a NXOpen::Annotations::PmiString builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiStringBuilder Created in NX6.0.0 |
| PmiSupplementalGeometryRegionBuilder | Represents a NXOpen.Annotations.PmiSupplementalGeometryRegionBuilder |
| PmiTableBuilder | Represents a NXOpen::Annotations::PmiTableSection builder To create a new instance of this class, use NXOpen::Annotations::PmiTableSectionCollection::CreatePmiTableBuilder Default values |
| PmiTableSection | Represents a PMI table section To create or edit an instance of this class, use NXOpen::Annotations::PmiTableBuilder Created in NX12.0.0 |
| PmiTableSectionCollection | Represents a collection of NXOpen::Annotations::PmiTableSection objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PmiThicknessDimensionBuilder | Represents a NXOpen::Annotations::PmiConcentricCircleDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreatePmiThicknessDimensionBuilder Created in NX9.0.0 |
| PmiTrackingPropertiesBuilder | Represents a NXOpen::Annotations::AngularDimension builder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreatePmiTrackingPropertiesBuilder Created in NX10.0.0 |
| PmiUrlNote | Represents a Pmi url Note To create or edit an instance of this class, use NXOpen::Annotations::PmiUrlNoteBuilder Created in NX6.0.0 |
| PmiUrlNoteBuilder | Represents a NXOpen::Annotations::PmiUrlNote builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiUrlNoteBuilder Created in NX6.0.0 |
| PmiUserDefined | Represents a User Defined Attribute To create or edit an instance of this class, use NXOpen::Annotations::PmiUserDefinedBuilder Created in NX6.0.0 |
| PmiUserDefinedBuilder | Represents a NXOpen::Annotations::PmiUserDefined builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreatePmiUserDefinedBuilder Created in NX6.0.0 |
| PmiVerticalDimension | Represents a PMI vertical dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiLinearDimensionBuilder Created in NX4.0.0 |
| PmiVerticalOrdinateDimension | Represents a PMI vertical ordinate dimension To create or edit an instance of this class, use NXOpen::Annotations::PmiOrdinateDimensionBuilder Created in NX4.0.0 |
| PmiWave | Represents a Wave To create or edit an instance of this class, use NXOpen::Annotations::PmiWaveLinkBuilder Created in NX8.0.0 |
| PmiWaveCollection | Represents a collection of NXOpen::Annotations::PmiWave objects To obtain an instance of this class, refer to NXOpen::Annotations::PmiManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PmiWaveLinkBuilder | Represents a NXOpen::Annotations::Pmi builder To create a new instance of this class, use NXOpen::Annotations::PmiWaveCollection::CreatePmiWaveLinkBuilder Created in NX8.0.0 |
| PointTarget | Represents point datum target To create or edit an instance of this class, use NXOpen::Annotations::PmiDatumTargetBuilder Created in NX4.0.0 |
| ProcessSpecification | Represents a Process Specification To create or edit an instance of this class, use NXOpen::Annotations::ProcessSpecificationBuilder Created in NX6.0.0 |
| ProcessSpecificationBuilder | Represents a NXOpen::Annotations::ProcessSpecification builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateProcessSpecificationBuilder Created in NX6.0.0 |
| QueryPmiBuilder | Represents a NXOpen::Annotations::QueryPmiBuilder To create a new instance of this class, use NXOpen::Annotations::AnnotationManager::CreateQueryPmiBuilder Default values |
| RadialDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateRadialDimensionBuilder Created in NX9.0.0 |
| RadialStyleBuilder | Represents a NXOpen::Annotations::RadialStyleBuilder |
| RadiusDimension | Represents a radius dimension To create or edit an instance of this class, use NXOpen::Annotations::RadialDimensionBuilder Created in NX4.0.0 |
| RapidDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateRapidDimensionBuilder Created in NX9.0.0 |
| RasterImage | Represents a NXOpen.Annotations.RasterImage class |
| RasterImageBuilder | Represents a raster image builder class To create a new instance of this class, use NXOpen::Annotations::DraftingImageCollection::CreateRasterImageBuilder Created in NX1847.0.0 |
| RectangularTarget | Represents a rectangular datum target To create or edit an instance of this class, use NXOpen::Annotations::PmiDatumTargetBuilder Created in NX4.0.0 |
| RectangularTargetData | Represents rectangular datum target data Created in NX4.0.0 |
| Region | Represents a Region To create or edit an instance of this class, use NXOpen::Annotations::RegionBuilder Created in NX6.0.0 |
| RegionBuilder | Represents a NXOpen::Annotations::RegionBuilder builder To create a new instance of this class, use NXOpen::Annotations::PmiRegionCollection::CreateRegionBuilder Default values |
| ReplaceSymbolBuilder | Represents a Builder for Replace Custom Symbol functionality To create a new instance of this class, use NXOpen::Annotations::CustomSymbolCollection::CreateReplaceSymbolBuilder Default values |
| RetainedAnnotationsBuilder | Represents a NXOpen::Annotations::RetainedAnnotationsBuilder |
| RevisionBusinessModifier | Represents business modifier that applies a revision (in the string format such as -A1) to a PMI |
| RevisionBusinessModifierBuilder | Represents a NXOpen::Annotations::RevisionBusinessModifier builder To create a new instance of this class, use NXOpen::Annotations::BusinessModifierCollection::CreateRevisionBusinessModifierBuilder Created in NX6.0.0 |
| SafetyClassBusinessModifier | Represents buiness modifier that applies safety classification such as Critical, Major to a PMI |
| SafetyClassBusinessModifierBuilder | Represents a NXOpen::Annotations::SafetyClassBusinessModifier builder To create a new instance of this class, use NXOpen::Annotations::BusinessModifierCollection::CreateSafetyClassBusinessModifierBuilder Created in NX6.0.0 |
| SearchCriteriaCalloutBuilder | Represents SearchCriteriaCalloutBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| SearchCriteriaDatumFeatureSymbolBuilder | Represents SearchCriteriaDatumFeatureSymbolBuilder To create a new instance of this class, use NXOpen::Annotations::SearchModelViewCollection::CreateSearchCriteriaDatumFeatureSymbolBuilder Created in NX7.5.0 |
| SearchCriteriaDatumTargetBuilder | Represents SearchCriteriaDatumTargetBuilder To create a new instance of this class, use NXOpen::Annotations::SearchModelViewCollection::CreateSearchCriteriaDatumTargetBuilder Created in NX7.5.0 |
| SearchCriteriaDimensionBuilder | Represents SearchCriteriaDimensionBuilder To create a new instance of this class, use NXOpen::Annotations::SearchModelViewCollection::CreateSearchCriteriaDimensionBuilder Created in NX7.5.0 |
| SearchCriteriaFeatureControlFrameBuilder | Represents SearchCriteriaFeatureControlFrameBuilder To create a new instance of this class, use NXOpen::Annotations::SearchModelViewCollection::CreateSearchCriteriaFeatureControlFrameBuilder Created in NX7.5.0 |
| SearchCriteriaPMINotesBuilder | Represents SearchCriteriaPMINotesBuilder To create a new instance of this class, use NXOpen::Annotations::SearchModelViewCollection::CreateSearchCriteriaPminotesBuilder Created in NX7.5.0 |
| SearchCriteriaSurfaceFinishBuilder | Represents SearchCriteriaSurfaceFinishBuilder To create a new instance of this class, use NXOpen::Annotations::SearchModelViewCollection::CreateSearchCriteriaSurfaceFinishBuilder Created in NX7.5.0 |
| SearchModelView | Represents a search model view To create or edit an instance of this class, use NXOpen::Annotations::SearchModelViewBuilder Created in NX7.5.0 |
| SearchModelViewBuilder | Represents a NXOpen::Annotations::SearchModelViewBuilder To create a new instance of this class, use NXOpen::Annotations::SearchModelViewCollection::CreateSearchModelViewBuilder Default values |
| SearchModelViewCollection | Represents a collection of NXOpen::Annotations::SearchModelView objects |
| iterator | Iterator for accessing the contents of the collection |
| SelectAnnotation | Represents a single object selection |
| SelectAnnotationList | Represents a list of objects on a selection list |
| SelectBaseCustomSymbolList | Represents a list of objects on a selection list |
| SelectDimension | Represents a single object selection |
| SelectOrdinateDimensionList | Represents a list of objects on a selection list |
| SelectTableSectionList | Represents a list of objects on a selection list |
| ShipDimensionBuilder | Represents a NXOpen::Annotations::Dimension builder To create a new instance of this class, use NXOpen::Annotations::ShipDimensionCollection::CreateShipDimensionBuilder Created in NX9.0.0 |
| ShipDimensionCollection | Represents a collection of NXOpen::Annotations::Dimension objects To obtain an instance of this class, refer to NXOpen::Part Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ShipDraftingFramebarGeneralBuilder | Represents a NXOpen::Annotations::ShipDraftingFramebarGeneralBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| SimpleDraftingAid | Represents a simple drafting aid |
| SimpleDraftingAidPreferences | Represents simple drafting aid preferences Created in NX4.0.0 |
| SingleSidedDisplayBuilder | Represents a NXOpen::Annotations::SingleSidedDisplayBuilder |
| SmashCustomSymbolBuilder | Represents a NXOpen::Annotations::SmashCustomSymbolBuilder |
| SpecificNote | Represents a Specific Note To create or edit an instance of this class, use NXOpen::Annotations::SpecificNoteBuilder Created in NX6.0.0 |
| SpecificNoteBuilder | Represents a NXOpen::Annotations::SpecificNote builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateSpecificNoteBuilder Created in NX6.0.0 |
| StyleBuilder | Represents a NXOpen::Annotations::StyleBuilder |
| SuppressPMIBuilder | Represents Annotations.SuppressPMIBuilder |
| SurfaceFinish | Represents a PMI Surface Finish To create or edit an instance of this class, use NXOpen::Annotations::SurfaceFinishBuilder Created in NX6.0.0 |
| SurfaceFinishBuilder | Represents a NXOpen::Annotations::SurfaceFinish builder To create a new instance of this class, use NXOpen::Annotations::PmiAttributeCollection::CreateSurfaceFinishBuilder Created in NX6.0.0 |
| SymbolCatalogBuilder | Represents a builder to instantiate a symbol from a parameterized family of standard symbols defined in catalogs, e.g |
| SymbolCatalogParameterBuilder | This builder allows you to define one parameter for a symbol To create a new instance of this class, use NXOpen::Annotations::SymbolCatalogBuilder::NewParameter Created in NX8.0.0 |
| SymbolCatalogParameterBuilderList | Represents a list of objects |
| SymbolFile | Represents a symbolFile To create or edit an instance of this class, use NXOpen::Annotations::SymbolFileBuilder Created in NX8.0.0 |
| SymbolFileBuilder | Represents builder for drafting Symbol file builder To create a new instance of this class, use NXOpen::Annotations::SymbolFileCollection::CreateSymbolFileBuilder Created in NX8.0.0 |
| SymbolFileCollection | Represents a collection of NXOpen::Annotations::SymbolFile objects Use NXOpen::Annotations::SymbolFile to get the instance of this class |
| iterator | Iterator for accessing the contents of the collection |
| SymbolPreferences | Represents symbol preferences Created in NX3.0.0 |
| SymbolStyleBuilder | Represents a NXOpen::Annotations::SymbolStyleBuilder |
| SymbolWorkflowBuilder | Represents a NXOpen::Annotations::SymbolWorkflowBuilder |
| SymmetricalCenterline | Represents a Symmetrical Centerline To create or edit an instance of this class, use NXOpen::Annotations::SymmetricalCenterlineBuilder Created in NX6.0.0 |
| SymmetricalCenterlineBuilder | Builder for creating Symmetrical Centerline |
| SymmetricalCenterlineSettingsBuilder | Represents a Builder for Symmetrical Centerline Settings Created in NX6.0.0 |
| Table | Represents a NXOpen::Annotations::Table |
| TableCellStyleBuilder | Represents a NXOpen::Annotations::TableCellStyleBuilder |
| TableCollection | Represents a collection of NXOpen::Annotations::Table objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TableColumnBuilder | Represents a |
| TableColumnBuilderList | Represents a list of objects |
| TableColumnSettingsBuilder | Represents a Annotations::TableColumnSettingsBuilder |
| TableCommonSortingBuilder | Represents a |
| SortData | Sort data used to specify column position and sorting direction |
| TableEditSettingsBuilder | Represents a NXOpen::Annotations::TableEditSettingsBuilder |
| TableRowSortingBuilder | Represents a Annotations::TableRowSortingBuilder |
| TableSection | Represents a NXOpen::Annotations::TableSection |
| TableSectionBuilder | Represents a NXOpen::Annotations::TableSection builder To create a new instance of this class, use NXOpen::Annotations::TableSectionCollection::CreateTableSectionBuilder Default values |
| TableSectionCollection | Represents a collection of NXOpen::Annotations::TableSection objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TableSectionStyleBuilder | Represents a NXOpen::Annotations::TableSectionStyleBuilder |
| TableStyleBuilder | Represents a NXOpen::Annotations::TableStyleBuilder |
| TabularNoteStyleBuilder | Represents a NXOpen::Annotations::TabularNoteStyleBuilder |
| TargetPoint | Represents a target point To create or edit an instance of this class, use NXOpen::Annotations::TargetPointBuilder Created in NX6.0.0 |
| TargetPointBuilder | Represents a NXOpen::Annotations::TargetPoint builder To create a new instance of this class, use NXOpen::Annotations::TargetPointCollection::CreateTargetPointBuilder Default values |
| TargetPointCollection | Represents a collection of NXOpen::Annotations::TargetPoint objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TextCfw | Specifies color, font, and width for text |
| TextComponent | Represents a single text in an annotation and can be queried for information about that text |
| TextWithEditControlsBuilder | Represents a NXOpen::Annotations::TextWithEditControlsBuilder which collects internationalized text strings from the user for processing on an annotation object |
| TextWithSymbolsBuilder | Represents a NXOpen::Annotations::TextWithSymbolsBuilder which collects internationalized text strings from the user for processing on an annotation object |
| ThicknessDimensionBuilder | Represents a NXOpen::Annotations::ConcentricCircleDimension builder To create a new instance of this class, use NXOpen::Annotations::DimensionCollection::CreateThicknessDimensionBuilder Created in NX9.0.0 |
| TitleBlock | Represents a NXOpen::Annotations::TitleBlock To create or edit an instance of this class, use NXOpen::Annotations::DefineTitleBlockBuilder Created in NX8.0.0 |
| TitleBlockCellBuilder | Represents a NXOpen::Annotations::TitleBlockCellBuilder To create a new instance of this class, use NXOpen::Annotations::TitleBlockCollection::CreateCellBuilder Created in NX8.0.0 |
| TitleBlockCellBuilderList | Represents a list of objects |
| TitleBlockCollection | Represents a collection of NXOpen::Annotations::TitleBlock |
| iterator | Iterator for accessing the contents of the collection |
| TitleBlockPreferences | Represents title_block preferences |
| UnitsFormatPreferences | Represents units and format preferences Created in NX4.0.0 |
| UnitsStyleBuilder | Represents a NXOpen::Annotations::UnitsStyleBuilder |
| UrlBusinessModifier | Represents business modifier that applies an URL to a PMI |
| UrlBusinessModifierBuilder | Represents a NXOpen::Annotations::UrlBusinessModifier builder To create a new instance of this class, use NXOpen::Annotations::BusinessModifierCollection::CreateUrlBusinessModifierBuilder Created in NX6.0.0 |
| UserSymbolPreferences | Represents preferences related to user-defined symbols Created in NX3.0.0 |
| Value | Specifies the value data |
| VerticalDimension | Represents a vertical dimension To create or edit an instance of this class, use NXOpen::Annotations::LinearDimensionBuilder Created in NX4.0.0 |
| VerticalOrdinateDimension | Represents a vertical ordinate dimension To create or edit an instance of this class, use NXOpen::Annotations::OrdinateDimensionBuilder Created in NX4.0.0 |
| VerticalOrdinateMargin | Represents a vertical ordinate margin Created in NX4.0.0 |
| Weld | Represents a weld To obtain an instance of this class, use NXOpen::Annotations::WeldCollection Created in NX4.0.0 |
| WeldCollection | Represents a collection of NXOpen::Annotations::Weld objects To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Assemblies | Provides classes and interfaces for Assemblies |
| ProductInterface | Provides classes and interfaces for Assembly Product Interfaces |
| Collection | This class represents the collection of product interface objects To obtain an instance of this class, refer to NXOpen::Part Created in NX5.0.0 |
| InterfaceObject | Represents a Product Interface Object Builder |
| ObjectBuilder | Represents a Product Interface Object Builder |
| PropertyBuilder | Represents a NXOpen::Assemblies::ProductInterface::PropertyBuilder builder To create a new instance of this class, use NXOpen::Assemblies::ProductInterface::Collection::CreatePropertyBuilder Created in NX9.0.0 |
| AbsolutePositionBuilder | Represents a builder class that absolutely positions the specified objects |
| AddComponentBuilder | Represents a builder class that performs add existing component operation in current context |
| Arrangement | Manages the suppression of NXOpen::Assemblies::Component s within a NXOpen::Assemblies::ComponentAssembly |
| ArrangementCollection | Collection of arrangements To obtain an instance of this class, refer to NXOpen::Assemblies::ComponentAssembly Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ArrangementsBuilder | Represents an arrangements builder that selects an arrangement |
| AssembliesGeneralPropertiesBuilder | Represents an NXOpen::Assemblies::AssembliesGeneralPropertiesBuilder to be used for changing the general properties of a component |
| AssembliesParameterPropertiesBuilder | Represents an NXOpen::Assemblies::AssembliesParameterPropertiesBuilder to be used for changing the name or modifying the positioning mixture status of a component |
| Assembly | Assembly class This is an abstract class, and cannot be instantiated |
| AssemblyManager | Represents the Assembly Manager To obtain an instance of this class, refer to NXOpen::BasePart Created in NX6.0.0 |
| AttributeSearchTerm | An attribute search term within a NXOpen::Assemblies::SubsetRecipe |
| AttributeSearchTermBuilder | An AttributeSearchTermBuilder is used to create or edit an NXOpen::Assemblies::AttributeSearchTerm |
| BoxSearchTerm | A volume search term within a NXOpen::Assemblies::SubsetRecipe |
| BoxSearchTermBuilder | A BoxSearchTermBuilder is used to create or edit an NXOpen::Assemblies::BoxSearchTerm |
| ClearanceAnalysisBuilder | Represents NXOpen::Assemblies::ClearanceAnalysisBuilder |
| ClearanceSet | Represents NXOpen::Assemblies::ClearanceSet |
| Summary | Summary of the most recent Clearance Analysis results |
| ClearanceSetCollection | Represents NXOpen::Assemblies::ClearanceSetCollection |
| iterator | Iterator for accessing the contents of the collection |
| Component | Represents a component in a NXOpen::Assemblies::ComponentAssembly |
| ComponentAssembly | Represents the set of NXOpen::Assemblies::Component s that make up an assembly |
| ComponentGroup | Represents a Component Group that is defined within an Assembly |
| ComponentGroupCollection | Contains a collection of Component Groups a NXOpen::Assemblies::ComponentGroup that are defined within an Assembly part |
| iterator | Iterator for accessing the contents of the collection |
| ComponentOrder | Represents an order object that stores the order of child NXOpen::Assemblies::Component s in context of parent NXOpen::Assemblies::ComponentAssembly |
| ComponentPattern | Represents the component pattern class |
| ComponentPatternBuilder | Represents a builder class that performs various NXOpen::Assemblies::ComponentPattern operations |
| ComponentPatternCollection | Represents the collection object for all component patterns |
| iterator | Iterator for accessing the contents of the collection |
| ConstraintDisplayBuilder | The NXOpen::Assemblies::ConstraintDisplayBuilder can be used to control visibility of constraints and optionally components |
| CopyDesignElementBuilder | Represents a builder class that performs copying design element operation in 4GD |
| CreateComponentBuilder | Represents a NXOpen::Assemblies::CreateComponentBuilder builder class |
| CreateNewComponentBuilder | Represents a NXOpen::Assemblies::CreateNewComponentBuilder builder class |
| CreateOverridePartBuilder | Represents a builder class that creates empty override part in the specified design elements |
| DegreesOfFreedom | Structure used to report the Degrees of Freedom of a component |
| DeleteOverridePartBuilder | Represents a builder class that deletes override part in the specified design elements |
| DesignElementBuilder | Represents a builder class that performs various design element operations |
| DrawingExplosion | Represents an explosion used in a drawing view of an arrangement |
| DrawingExplosionCollection | Represents a collection of drawing explosions To obtain an instance of this class, refer to NXOpen::Assemblies::ComponentAssembly Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ExplicitSearchTerm | A NXOpen::Assemblies::SubsetRecipe search term that refers explicitly to a design element |
| ExplodedComponent | Represents a NXOpen::Assemblies::Component within an explosion |
| Explosion | Represents an explosion |
| ExplosionCollection | Represents a collection of explosions To obtain an instance of this class, refer to NXOpen::Assemblies::ComponentAssembly Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FindInCollaborativeDesign | FindInCollaborativeDesign is a searcher for performing simple searches in the context of a subset |
| GroupSearchTerm | A group of NXOpen::Assemblies::SearchTerm s within a NXOpen::Assemblies::SubsetRecipe |
| HideComponentBuilder | Represents a NXOpen::Assemblies::HideComponentBuilder To create a new instance of this class, use NXOpen::Assemblies::AssemblyManager::CreateHideComponentBuilder Created in NX6.0.0 |
| LoadInterpartDataBuilder | Represents a builderNXOpen::Assemblies::LoadInterpartDataBuilder To create a new instance of this class, use NXOpen::Assemblies::AssemblyManager::CreateLoadInterpartDataBuilder Default values |
| MakeUniquePartBuilder | Represents a NXOpen::Assemblies::MakeUniquePartBuilder builder |
| MechanicalRoutingSubsetBuilder | A MechanicalRoutingSubsetBuilder is used to create/edit Subsets NXOpen::Assemblies::Subset that are used to define the context needed to perform a Mechanical Routing Design activity |
| Order | Represents base class for all Order classes |
| OrderCollection | Collection of NXOpen::Assemblies::Order s To obtain an instance of this class, refer to NXOpen::Assemblies::ComponentAssembly Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Partition | A partition is a Teamcenter object in a Collaborative Design |
| PartitionList | Represents a list of objects |
| PartitionScheme | A partition scheme is a Teamcenter object in a Collaborative Design |
| PartitionSearchTerm | A Assemblies::SubsetRecipe search term that refers to a partition |
| PatternInstance | Represents the pattern instance object |
| PatternMaster | Represents the pattern master object |
| PatternMember | Represents the pattern member object |
| PlaneSearchTerm | A plane search term within a NXOpen::Assemblies::SubsetRecipe |
| PlaneSearchTermBuilder | A PlaneSearchTermBuilder is used to create or edit an NXOpen::Assemblies::PlaneSearchTerm |
| PositioningGroup | Represents the class for positioning group |
| PositioningGroupBuilder | Represents builder class for positioning group which is used to store constraints for design element |
| PositioningTask | Represents the class for positioning task |
| PositioningTaskBuilder | Represents the class for positioning task builder To create a new instance of this class, use NXOpen::Assemblies::SubsetCollection::CreatePositioningTaskBuilder Created in NX10.0.0 |
| ProductOutlineBuilder | Represents a builder NXOpen::Assemblies::ProductOutlineBuilder |
| ProductOutlineManager | Represents a collection of assemblies |
| ProximitySearchTerm | A proximity search term within a NXOpen::Assemblies::SubsetRecipe |
| ProximitySearchTermBuilder | A ProximitySearchTermBuilder is used to create or edit an Assemblies::BoxSearchTerm |
| ReflectComponentBuilder | Represents a builder class that creates reflected component To create a new instance of this class, use NXOpen::Assemblies::AssemblyManager::CreateReflectComponentBuilder Created in NX12.0.2 |
| RelinkerBuilder | Represents a NXOpen::Assemblies::RelinkerBuilder To create a new instance of this class, use NXOpen::Assemblies::RelinkerCollection::CreateBuilder Created in NX5.0.0 |
| RelinkerCollection | Represents a collection of relinker To obtain an instance of this class, refer to NXOpen::Part Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ReplaceComponentBuilder | Represents a NXOpen::Assemblies::ReplaceComponentBuilder builder |
| RunContentProximitySearchTerm | A proximity search term within a NXOpen::Assemblies::SubsetRecipe |
| RunContentProximitySearchTermBuilder | A RunContentProximitySearchTermBuilder is used to create or edit an Assemblies::RunContentProximitySearchTerm |
| SearchResultCollection | A collection of NXOpen::Assemblies::SearchResultElement s |
| iterator | Iterator for accessing the contents of the collection |
| SearchResultElement | A search result element can be produced as the result of a search performed in the context of a NXOpen::Assemblies::SubsetBuilder |
| SearchTerm | A search term is used to specify a search for the contents of a NXOpen::Assemblies::Subset |
| SearchTermBuilder | A SearchTermBuilder is used to create or edit an NXOpen::Assemblies::SearchTerm |
| SelectComponent | Represents a single object selection |
| SelectComponentList | Represents a list of objects on a selection list |
| ShowComponentBuilder | Represents a NXOpen::Assemblies::ShowComponentBuilder To create a new instance of this class, use NXOpen::Assemblies::AssemblyManager::CreateShowComponentBuilder Created in NX6.0.0 |
| Subset | A subset is a set of design elements within a collaborative design |
| SubsetBuilder | A SubsetBuilder is used to create or edit an NXOpen::Assemblies::Subset |
| SubsetCollection | Represents a collection of subset |
| iterator | Iterator for accessing the contents of the collection |
| SubsetConfigurationBuilder | A SubsetConfigurationBuilder is used to edit the revision rule and effectivity used to configure the contents of the subset |
| SubsetRecipe | A subset recipe is used by a NXOpen::Assemblies::SubsetBuilder to collect NXOpen::Assemblies::SearchTerm s |
| iterator | Iterator for accessing the contents of the collection |
| UpdateDesignElementPositionBuilder | Represents the builder class that updates positions of the DE's(Shape/Reuse) or Subordinates with override that are out of date |
| UpdateStructureBuilder | Represents a builder NXOpen::Assemblies::UpdateStructureBuilder |
| WaveQuery | Provides information about the inter-part relations (e.g |
| BlockStyler | Provides classes and interfaces for Block Styler |
| AngularDimension | Represents a Angular Dimension block Created in NX8.5.0 |
| BlockDialog | Represents a Dialog Created in NX6.0.0 |
| BodyCollector | Represents a Body Collector block Created in NX8.5.0 |
| Button | Represents a button Created in NX8.5.0 |
| ChooseExpression | Represents Choose Expression block Created in NX8.5.0 |
| CompositeBlock | A composite block is a block that contains other blocks Created in NX6.0.0 |
| CurveCollector | Represents a Curve Collector Created in NX8.5.0 |
| DoubleBlock | Represents a Double block Created in NX8.5.0 |
| DoubleTable | Represents a Double Table block Created in NX8.5.0 |
| DrawingArea | Represents a Drawing Area block Created in NX8.5.0 |
| Enumeration | Represents an Enumeration block Created in NX8.5.0 |
| Explorer | Represents an Explorer block |
| ExpressionBlock | Represents an Expression block Created in NX8.5.0 |
| FaceCollector | Represents a Face Collector Created in NX8.5.0 |
| FileSelection | Represents File Selection With Browse block Created in NX8.5.0 |
| FolderSelection | Represents Folder Selection With Browse block Created in NX8.5.0 |
| Group | Represents a Group Block Created in NX8.5.0 |
| IntegerBlock | Represents a Integer block Created in NX8.5.0 |
| IntegerTable | Represents a Integer Table block Created in NX8.5.0 |
| Label | Represents a Label Created in NX8.5.0 |
| LayerBlock | Represents a Layer block Created in NX10.0.0 |
| LinearDimension | Represents a Linear Dimension block Created in NX8.5.0 |
| LineColorFontWidth | Represents a Line Width block Created in NX9.0.0 |
| LineFont | Represents a Line Width block Created in NX9.0.0 |
| LineWidth | Represents a Line Width block Created in NX8.5.0 |
| ListBox | Represents a ListBox block Created in NX6.0.0 |
| Microposition | Represents a Microposition block Created in NX8.5.0 |
| MultilineString | Represents a Multiline String block Created in NX6.0.0 |
| Node | Represents the node created and utilized by BlockStyler::Tree |
| ObjectColorPicker | Represents an Object Color Picker Block Created in NX8.5.0 |
| OnPathDimension | Represents a On Path Dimension block Created in NX8.5.0 |
| OrientXpress | Represents OrientXpress Block Created in NX8.5.0 |
| PropertyList | Represents a list of properties Created in NX6.0.0 |
| RadiusDimension | Represents a Radius Dimension block Created in NX8.5.0 |
| ReverseDirection | Represents Reverse Direction block Created in NX8.5.0 |
| RGBColorPicker | Represents a RGB Color Picker block Created in NX8.5.0 |
| ScrolledWindow | Represents a Scrolled Window block Created in NX8.5.0 |
| SectionBuilder | Represents a Section Builder Created in NX8.5.0 |
| SelectElement | Represents a Select Elements block Created in NX8.5.0 |
| SelectFacetRegion | Represents a Select Region Selection block Created in NX12.0.0 |
| SelectFeature | Represents a Select Feature block Created in NX8.5.0 |
| SelectNode | Represents a Select Node block Created in NX8.5.0 |
| SelectObject | Represents a Select Object block Created in NX8.5.0 |
| SelectPartFromList | Represents a Select Part From List block Created in NX8.5.0 |
| Separator | Represents a Separator block Created in NX8.5.0 |
| SetList | Represents a SetList block Created in NX6.0.0 |
| SpecifyAxis | Represents a Specify Axis block Created in NX8.5.0 |
| SpecifyCSYS | Represents a Specify CSYS block Created in NX8.5.0 |
| SpecifyLocation | Represents a Specify Location block Created in NX8.5.0 |
| SpecifyOrientation | Represents Specify Orientation block Created in NX8.5.0 |
| SpecifyPlane | Represents a Specify Plane block Created in NX8.5.0 |
| SpecifyPoint | Represents a Specify Point block Created in NX8.5.0 |
| SpecifyVector | Represents Specify Vector block Created in NX8.5.0 |
| StringBlock | Represents a String block Created in NX8.5.0 |
| SuperPoint | Represents a Super Point block Created in NX8.5.0 |
| SuperSection | Represents a Super Section block Created in NX8.5.0 |
| TabControl | Represents a Tab Control layout Created in NX8.5.0 |
| Table | Represents a Table layout Created in NX8.5.0 |
| TextColorFontWidth | Represents a Line Width block Created in NX9.0.0 |
| Toggle | Represents a Toggle block Created in NX8.5.0 |
| Tree | Represents the Tree block in block styler automation |
| TreeListMenu | Represents a menu class utilized by BlockStyler::Tree |
| UIBlock | Represents a UI Block Created in NX6.0.0 |
| Wizard | Represents a Wizard block Created in NX7.5.0 |
| BodyDes | Provides classes and interfaces for Body Design |
| OnestepUnform | Represents a onestep unform feature To create or edit an instance of this class, use NXOpen::BodyDes::OnestepUnformBuilder Created in NX5.0.0 |
| OnestepUnformBuilder | Represents a NXOpen::BodyDes::OnestepUnformBuilder |
| OnestepUnformCollection | Represents a collection of OnestepUnform To obtain an instance of this class, refer to NXOpen::Part Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CAE | Provides classes and interfaces relating to Advanced Simulation and Design Simulation |
| AeroStructures | Provides classes and interfaces relating to Aero Structures |
| Author | Provides classes and interfaces relating to Aero Structures Author |
| ABB | Represents a AeroStruct application building block (ABB) To obtain an instance of this class, refer to NXOpen::Session Created in NX12.0.0 |
| AbbContext | ABB context is passed to the ABB implementation |
| CalculationContext | Calculation context is passed to the method implementation |
| InputBoolean | Represents a boolean input parameter |
| InputInteger | Represents an integer input parameter |
| InputLaminate | Represent a laminate input parameter |
| InputLoad | Represent a load input parameter |
| InputParameter | Parent class of all typed input parameter classes |
| InputScalar | Represents a scalar input parameter |
| InputTable | Represents an Table input parameter |
| InputText | Represents a text input parameter |
| MethodLibrary | Represents a NXOpen::CAE::AeroStructures::Author::MethodLibrary object |
| OutputBoolean | Represents a boolean output parameter |
| OutputInteger | Represents an integer output parameter |
| OutputParameter | Parent class of all the typed output parameter classes |
| OutputScalar | Represents a scalar output parameter |
| OutputText | Represents a text output parameter |
| CalculationLogLine | This is the Calculation log line |
| DescriptionValue | Represents a description value |
| FailureMode | This is the Failure Mode |
| FreeBodyLoadExtraction | This is the FreeBody LoadExtraction class |
| Laminate | Represents a NXOpen::CAE::AeroStructures::Laminate object |
| LaminateHelper | Represents a NXOpen::CAE::AeroStructures::LaminateHelper object |
| LaminateQuery | Represents a laminate query |
| LaminateQueryManager | Represents a laminate manager |
| LaminateValue | Represents a laminate value |
| LoadCase | Represents a NXOpen::CAE::AeroStructures::LoadCase |
| LoadCaseListBuilder | This is a manager to the loadcases of CAE::AeroStructures::MarginSolution class |
| LoadCaseSet | Represents a NXOpen::CAE::AeroStructures::LoadCaseSet |
| LoadCaseSetBuilder | This is a manager to the CAE::AeroStructures::LoadCaseSet class |
| LoadCaseSetCollection | Represents a collection of AeroStruct LoadCases Use CAE::AeroStructures::MarginSolution::LoadCaseSetCollection to get the instance of this class |
| iterator | Iterator for accessing the contents of the collection |
| LoadCaseSetLoadCaseCollection | Represents a collection of AeroStruct LoadCases Use CAE::AeroStructures::LoadCaseSet::LoadCaseCollection to get the instance of this class |
| iterator | Iterator for accessing the contents of the collection |
| LoadExtractionStrategy | Represents a proper load extraction strategy |
| LoadExtractionValue | Represents a proper load extraction value |
| LocalLaminate | Represents a NXOpen::CAE::AeroStructures::LocalLaminate object |
| ManualLoadExtraction | This is the Manual LoadExtraction class |
| MarginAnnot | Represents an object that manages annotation for CAE To obtain an instance of this object use on of the creator in NXOpen::CAE::AeroStructures::MarginAnnotCollection |
| MarginAnnotBuilder | Represents a Margin annotation builder class To create a new instance of this class, use NXOpen::CAE::AeroStructures::MarginAnnotCollection::CreateMarginAnnotBuilder Created in NX12.0.0 |
| MarginAnnotCollection | Represents a collection of Margin annotation To obtain an instance of this class, refer to NXOpen::CAE::CaePart Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MarginCalculation | This is the MarginCalculation |
| MarginCalculationBuilder | Represents a NXOpen::CAE::AeroStructures::MarginCalculation builder |
| MarginCalculationCollection | Represents a collection of CAE::AeroStructures::MarginCalculation |
| iterator | Iterator for accessing the contents of the collection |
| MarginResultIterator | Iterate over the solutions of a query |
| MarginResultQuery | CAE::AeroStructures::MarginResultQuery defines a query on all, or a subset, of the available margin results |
| MarginResultTableDataProvider | CAE::AeroStructures::MarginResultTableDataProvider is used by the global results editor |
| MarginResultTableRow | MarginResultTableRow represents one row in a result table and is returned by a query iterator |
| MarginResultTableRowFilter | A MarginResultTableRowFilter holds conditions which can be applied to a MarginResultTableRow |
| MarginSolution | Represents a NXOpen::CAE::AeroStructures::MarginSolution |
| MarginSolutionBuilder | This is a manager to the CAE::AeroStructures::MarginSolution class |
| MarginSolutionCollection | Represents a collection of margin solution |
| iterator | Iterator for accessing the contents of the collection |
| MarginSolutionLoadCaseCollection | Represents a collection of AeroStruct LoadCases Use CAE::AeroStructures::MarginSolution::LoadCaseCollection to get the instance of this class |
| iterator | Iterator for accessing the contents of the collection |
| MatrixManip | This is the User LoadExtraction class |
| MethodDescriptor | This is the MethodDescriptor |
| ParameterDescriptor | This is the Parameter Descriptor |
| PropTable | Represents a property table |
| TableParameter | This is the TableParameter |
| TableParamValue | Represents a proper table parameter value |
| UserLoadExtraction | This is the User LoadExtraction class |
| Connections | Provides classes and interfaces relating to Connections |
| Adhesive | Adhesive connection |
| Bolt | Bolt connection |
| Bushing | Bushing connection |
| Clinch | Clinch connection |
| ComponentData | Composer connection |
| Composer | Composer |
| ComposerData | Composer connection |
| ComposerTool | ComposerTool |
| ConnectionData | Composer connection |
| ConnectionDBData | Connection DB data |
| ConnectionDBItemData | Connection DB item data |
| CoordinatesLocation | Location interface |
| CoordinatesSeriesLocation | Location interface |
| Crimp | Crimp connection |
| CurveLocation | Location interface |
| Damper | Damper connection |
| Element | This is the class to access a connection element |
| ElementCollection | Element collection provides methods to manage CAE::Connections::Element objects |
| iterator | Iterator for accessing the contents of the collection |
| FeEdgesLocation | Location interface |
| Folder | Offers a way to create a hierarchy of connections and sub-folders |
| IConnection | This class represents an interface to a connection object |
| ICsys | This class represents an Interface to the Connection Csys |
| IDiameter | This class represents an Interface to the Diameter parameters |
| IDof | This class represents an interface to the connection's degrees of freedom |
| IDofCombination | This class represents an interface to the connection's degrees of freedom combination |
| IFlangesContainer | This interface offers access to the flanges of a connection (SpotWeld for example) |
| IFriction | This class represents an Interface to the Friction constants |
| IHeight | This class represents an Interface to the Height parameters |
| ILineDiscretization | This class represents an Interface to the Diameter parameters |
| ILineOffset | This class represents an Interface to the Diameter parameters |
| ILocationsContainer | This class represents an Interface to the Locations parameters |
| ILocationsMultiPointContainer | This class represents an Interface to the Multi Point Locations container |
| ILocationsSinglePointContainer | This class represents an Interface to the Locations parameters |
| ILocationsWithDirContainer | This class represents an Interface to the Locations parameters |
| ILocationsWithDiscretizationContainer | This class represents an Interface to the Locations With Discretization container |
| IMassConnectivity | This class represents an Interface to the Lumped Mass panel connection parameters |
| IMassInertia | This class represents an Interface to the Mass Inertia |
| IMassPhysicalParams | This class represents an Interface to the Mass Physical Params |
| IMassTarget | This class represents an Interface to the Lumped Mass target |
| IMaterial | This class represents an Interface to the Material entity |
| INodalTargetCenter | This class represents an Interface to the Connection Target |
| INodalTargetCenterOption | This class represents an Interface to the Nodal Target Center Option |
| INodalTargetLegs | This class represents an Interface to the Connection Target |
| INodalTargetLocalSpiderDefinition | This class represents an Interface to the Nodal Target Local Spider Definition |
| INodalTargetsContainer | This class represents an Interface to the Connection Target Container |
| INodalTargetsPairing | This class represents an Interface to the nodal connections pairing algorithm parameters |
| ISeamWeldFlangesContainer | This interface offers access to the flanges of a Seam Weld connection |
| IStiffness | This class represents an Interface to the Stiffness constants |
| IStiffnessDynamic | This class represents an Interface to the Stiffness dynamic |
| IStructuralDamping | This class represents an Interface to the StructuralDamping constants |
| IStructuralDampingDynamic | This class represents an Interface to the StructuralDamping dynamic |
| ITolerance | This class represents an Interface to the Tolerance parameters |
| IViscousDamping | This class represents an Interface to the ViscousDamping constants |
| IViscousDampingDynamic | This class represents an Interface to the ViscousDamping dynamic |
| IWidth | This class represents an Interface to the Width parameters |
| Kinematic | Kinematic connection |
| LMIEBody | LMIEBody No creator Created in NX1847.0.0 |
| LMIECenterDefinition | Lumped Mass Center Definition |
| LMIEConnection | LMIEConnection No creator Created in NX1847.0.0 |
| LMIEElement | LMIEElement object No creator Created in NX1847.0.0 |
| LMIEElementEdge | LMIEElementEdge object No creator Created in NX1847.0.0 |
| LMIEElementFace | LMIEElementFace object No creator Created in NX1847.0.0 |
| LMIEError | LMIEError No creator Created in NX1847.0.0 |
| LMIEInertia | Lumped mass import export inertia object |
| LMIELegConnection | Mass definition |
| LMIELegDefinition | Mass definition |
| LMIELocalSpiders | Mass definition |
| LMIEMass | Mass definition |
| LMIEMesh | LMIEMesh object No creator Created in NX1847.0.0 |
| LMIENearestNodes | Mass definition |
| LMIENode | Lumped Mass center definition node |
| LMIEPanelOptions | Mass definition |
| LMIEPid | Lumped Mass PID |
| LMIEPoint | Lumped Mass center definition point |
| LMIERegionSelection | Region selection |
| LMIERingOptions | Mass definition |
| LMIESelectionRecipe | Lumped Mass center definition selection recipe |
| LMIEUnitSystem | Seam Weld connection |
| Location | Location base class |
| LocationWithDir | Location With Direction interface |
| LumpedMass | Lumped Mass |
| MeshPointLocation | This defines Mesh Point Location used by Universal Connections |
| NodalTarget | This class represents an Interface to the Connection Target |
| NodalTargetLocalSpider | This is the Local Spider Nodal Target |
| NodalTargetSetOfPoints | Set of Points Target |
| NodalTargetSinglePoint | Group of Points Target |
| NodalTargetSpider | Group of Points Target |
| NodeLocation | Location interface |
| NodeSeriesLocation | Location interface |
| PointLocation | Location interface |
| PointSeriesLocation | Location interface |
| Rigid | Rigid connection |
| Rivet | Rivet connection |
| Sealing | Sealing connection |
| SeamWeld | Seam Weld connection |
| SelectionRecipeLocation | Location interface |
| SpotWeld | Spot Weld connection |
| Spring | Spring connection |
| Utils | Contains universal connections utility methods To obtain an instance of this class, refer to NXOpen::CAE::CaeSession Created in NX12.0.0 |
| FTK | Provides classes and interfaces to Function Toolkit |
| AfuFileManager | Provides methods to query the loaded AFU files |
| ArrayRecord2D | Manages the 2d array record Not support KF |
| ArrayRecord2DEven | Manages the 2d array record with even abscissa data Not support KF |
| ArrayRecord3D | Manages the 3d array record Not support KF |
| BaseRecord | Manages the base record |
| BaseUnit | Manages the base unit Not support KF |
| ComplexSectionBasedMatrixRecord | Represents a section based matrix record which has complex data values |
| DataManager | Ftk data manager To obtain an instance of this class use NXOpen::Session::DataManager |
| ExportFilesParameter | Represents the parameter settings for exporting data to external files |
| FTKManager | FTK function data manager To obtain an instance of this class use NXOpen::Session::FTKManager |
| IApplicationData | Represents the interface for application specific data class Created in NX12.0.0 |
| IApplicationDataOwner | Represents the interface for application specific data owner Created in NX12.0.0 |
| MatrixPlotRecord | Represents record data for matrix plot |
| Op2FileManager | Provides methods to query the loaded OP2 files |
| Op2Record | Represents the op2 record data Not support KF |
| OptionSetting | Manager the options data for AFU Data Record Not support KF |
| RealSectionBasedMatrixRecord | Represents a section based matrix record which has real data values |
| SectionBasedMatrixRecord | Represents a kind of record data could be displayed by 3D graphing |
| ModelCheck | Provides classes and interfaces relating to Model Check |
| AlignBeamElementDirectionBuilder | Represents a NXOpen::CAE::ModelCheck::AlignBeamElementDirectionBuilder builder used to align the Directions of connected beam elements with a seed beam element |
| AlignShellElementFirstEdgeBuilder | Represents a NXOpen::CAE::ModelCheck::AlignShellElementFirstEdgeBuilder builder used to align the first edges of connected shell elements with a seed element edge |
| AlignShellElementNormalBuilder | Represents a NXOpen::CAE::ModelCheck::AlignShellElementNormalBuilder builder used to align the normals of connected shell elements with a seed shell element |
| DuplicateElementsCheckBuilder | Represents a NXOpen::CAE::ModelCheck::DuplicateElementsCheckBuilder to check for duplicate elements within the candidate elements |
| DisplaySettings | Represents the display settings of duplicated elements detected |
| DuplicateNodesCheckBuilder | Represents a NXOpen::CAE::ModelCheck::DuplicateNodesCheckBuilder to check for duplicate nodes within the candidate nodes |
| DisplaySettings | Represents the display settings data |
| ElementEdgeCheckBuilder | Represents a NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder which can be used to detect free element edges or non-manifold edges |
| EdgeDisplayStyle | Display style of the edges detected |
| ElementMaterialOrientationCheckBuilder | Represents a NXOpen::CAE::ModelCheck::ElementMaterialOrientationCheckBuilder used to check the material orientation for shell and solid elements |
| ElementQualityCheckBuilder | Represents a NXOpen::CAE::ModelCheck::ElementQualityCheckBuilder to perform quality checking on the candidate elements |
| ElementQualityCheckResults | Represents the element quality checking result of NXOpen::CAE::ModelCheck::ElementQualityCheckBuilder To obtain an instance of this class use CAE.ModelCheck.ElementQualityCheckBuilder Created in NX8.5.0 |
| TestSummary | Reprents the summary data of a specified quality checking test type |
| ElementQualitySetting | Represents element quality check settings of a specified solver language |
| ElementQualitySettingCollection | Represents a collection of NXOpen::CAE::ModelCheck::ElementQualitySetting in a cae part |
| iterator | Iterator for accessing the contents of the collection |
| ElementSpecificTestValue | Represents the quality setting for a specfied element reference |
| ElementTestResult | Represents quality checking result for an element |
| FaceClearanceCheckBuilder | Represents a NXOpen::CAE::ModelCheck::FaceClearanceCheckBuilder to perform polygon face interference or clearance check |
| ISelectionBuilder | Represents the model check selection builder |
| ITestValue | Represents the quality check criteria value settings |
| ModelSetupCheckBuilder | Represents a NXOpen::CAE::ModelCheck::ModelSetupCheckBuilder which can be used to check if the active NXOpen::CAE::SimSolution contains all the necessary items for the analysis, including elements, loads, constraints and materials |
| QualityTestValue | Represents quality test settings of a specified test type |
| ReverseBeamElementDirectionBuilder | Represents a NXOpen::CAE::ModelCheck::ReverseBeamElementDirectionBuilder used to reverse directions for specified beam elements |
| ReverseShellElementNormalBuilder | Represents a NXOpen::CAE::ModelCheck::ReverseShellElementNormalBuilder used to reverse normals for specified shell elements |
| SolidElementFaceNormalBuilder | Represents a NXOpen::CAE::ModelCheck::SolidElementFaceNormalBuilder used to reorient normals for left handed solid elements |
| TestResult | Represents quality checking result of a quality test To obtain an instance of this class use CAE.ModelCheck.ElementTestResult.GetTestResults Created in NX8.5.0 |
| TestValueTypes | Represents the quality check criteria value settings |
| ElementReference | Element reference definition associated with this test |
| Optimization | Provides classes and interfaces relating to Optimization |
| DAOConstraint | Represents a NXOpen::CAE::Optimization::DAOConstraint |
| DAOConstraintBuilder | Represents a NXOpen::CAE::Optimization::DAOConstraintBuilder |
| DAOConstraintCollection | Represents the collection of optimization solution design constraint To obtain an instance of this class, refer to NXOpen::CAE::Optimization::DAOSolution Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DAODesignVariable | Represents a NXOpen::CAE::Optimization::DAODesignVariable |
| DAODesignVariableBuilder | Represents a NXOpen::CAE::Optimization::DAODesignVariableBuilder |
| DAODesignVariableCollection | Represents the collection of optimization solution design variable To obtain an instance of this class, refer to NXOpen::CAE::Optimization::DAOSolution Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DAOObjective | Represents a NXOpen::CAE::Optimization::DAOObjective |
| DAOOptimizationManager | Represents the Design and Analysis optimization manager that contains all optimization objects |
| DAOSolution | Represents a NXOpen::CAE::Optimization::DAOSolution |
| DAOSolutionBuilder | Represents a NXOpen::CAE::Optimization::DAOSolutionBuilder |
| DAOSolutionCollection | Represents the collection of optimization solution To obtain an instance of this class, refer to NXOpen::CAE::Optimization::DAOOptimizationManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DAOStopCondition | Represents a NXOpen::CAE::Optimization::DAOStopCondition |
| NameDescription | Created in NX8.0.0 |
| TBSBaseDesignVariableBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSDesignVariable This is an abstract class, and cannot be created |
| TBSCastCondition | Represents the manufacturing restrictions of NXOpen::CAE::Optimization::TBSTopologyRestrictArea Created in NX8.0.0 |
| TBSCheckDOF | Represents the restriction of dispacement in the coordinate direction of the referenced coordinate system Created in NX8.5.0 |
| DofSettings | Displacement restriction settings on three axial directions of referenced coordinate system |
| TBSConstraint | Represents the design constraint, which is defined with NXOpen::CAE::Optimization::TBSDesignVariable To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSConstraintBuilder Created in NX8.0.0 |
| TBSConstraintBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSConstraint To create a new instance of this class, use NXOpen::CAE::Optimization::TBSOptimizationManager::CreateResponseConstraintBuilder Created in NX8.0.0 |
| TBSConstraintCollection | Represents a collection of NXOpen::CAE::Optimization::TBSConstraint To obtain an instance of this class, refer to NXOpen::CAE::Optimization::TBSOptimizationSolution Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TBSDesignArea | Represents the design area Created in NX8.0.0 |
| TBSDesignResponse | Represents the design response referenced by NXOpen::CAE::Optimization::TBSConstraint and NXOpen::CAE::Optimization::TBSObjectives To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSDesignResponseBuilder Created in NX8.0.0 |
| TBSDesignResponseBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSDesignResponse To create a new instance of this class, use NXOpen::CAE::Optimization::TBSOptimizationManager::CreateDesignResponseBuilder Created in NX8.0.0 |
| TBSDesignVariable | Represents the design variable referenced by NXOpen::CAE::Optimization::TBSConstraint and NXOpen::CAE::Optimization::TBSObjectives To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSDesignVariableBuilder Created in NX8.0.0 |
| TBSDesignVariableBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSDesignVariable To create a new instance of this class, use NXOpen::CAE::Optimization::TBSOptimizationManager::CreateDesignVariableBuilder Created in NX8.0.0 |
| TBSDesignVariableCollection | Represents a collection of CAE::Optimization::TBSDesignVariable To obtain an instance of this class, refer to NXOpen::CAE::Optimization::TBSOptimizationSolution Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TBSEigenvalueOptimizationParameters | Represents the parameters to control an eigenvalue optimization Created in NX8.0.0 |
| TBSGroupDefinition | Represents a group of nodes or elements Created in NX8.0.0 |
| TBSIOptimizationTest | Represents an interface to perform optimization test Created in NX8.5.0 |
| TBSLoadCase | Represents the load case To create a new instance of this class, use NXOpen::CAE::Optimization::TBSOptimizationManager::CreateLoadCase Created in NX8.0.0 |
| TBSLoadCaseManager | Managers load cases Created in NX8.0.0 |
| TBSMeshSmooth | Represents the mesh smooth Created in NX8.5.0 |
| TBSObjectives | Represents the objective functions of an optimization Created in NX8.0.0 |
| TBSOptimizationManager | Represents the optimization manager to contain the optimization solutions and take charge of creating optimization objects To obtain an instance of this class, refer to NXOpen::CAE::SimSimulation Created in NX8.0.0 |
| TBSOptimizationParameters | Represents the parameters to control an optimization This is an abstract class, and cannot be created |
| TBSOptimizationSolution | Represents the solution to contain optimization setting This is an abstract class, and cannot be created |
| TBSOptimizationSolutionBuilder | Represents the abstract builder of NXOpen::CAE::Optimization::TBSOptimizationSolution |
| TBSOptimizationSolutionCollection | Represents a collection of NXOpen::CAE::Optimization::TBSOptimizationSolution To obtain an instance of this class, refer to NXOpen::CAE::Optimization::TBSOptimizationManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TBSOutputControlOptions | Represents the output result control options of the optimization Created in NX8.0.0 |
| TBSRestrictArea | Represents the restrictions for the design variable in an optimization To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSRestrictAreaBuilder Created in NX8.0.0 |
| TBSRestrictAreaBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSRestrictArea This is an abstract class, and cannot be created |
| TBSRestrictAreaCollection | Represents a collection of NXOpen::CAE::Optimization::TBSRestrictArea To obtain an instance of this class, refer to NXOpen::CAE::Optimization::TBSOptimizationSolution Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TBSShapeLinkCondition | Represents the definition of link condition for shape restriction Created in NX8.5.0 |
| TBSShapeOptimizationParameters | Represents the control parameters of shape optimization Created in NX8.5.0 |
| TBSShapeOptimizationSolution | Represents a shape optimization solution To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSShapeOptimizationSolutionBuilder Created in NX8.5.0 |
| TBSShapeOptimizationSolutionBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSShapeOptimizationSolution |
| TBSShapeRestrictArea | Represents the restrictions of the design variable in Shape optimization To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSShapeRestrictAreaBuilder Created in NX8.5.0 |
| TBSShapeRestrictAreaBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSShapeRestrictArea To create a new instance of this class, use NXOpen::CAE::Optimization::TBSOptimizationManager::CreateShapeRestrictAreaBuilder Created in NX8.5.0 |
| TBSSingleObjective | Represents a single objective To create a new instance of this class, use NXOpen::CAE::Optimization::TBSOptimizationManager::CreateSingleObjective Created in NX8.0.0 |
| TBSSmooth | Represents the parameters that control the generation of surfaces by optimization To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSSmoothBuilder Created in NX8.0.0 |
| TBSSmoothBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSSmooth |
| TBSSmoothCollection | Represents a collection of NXOpen::CAE::Optimization::TBSSmooth To obtain an instance of this class, refer to NXOpen::CAE::Optimization::TBSOptimizationSolution Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TBSStopCondition | Represents the condtion to end an optimization Created in NX8.0.0 |
| TBSTestFunction | Represents a test displacement for shape optimization or bead optimization Created in NX8.5.0 |
| TBSTopologyControllerOptimizationParameters | Represents the parameters to control an optimization in controller strategy Created in NX8.0.0 |
| TBSTopologyLinkCondition | Represents the definition of symmetry and link conditions for topology optimization Created in NX8.0.0 |
| TBSTopologyOptimizationSolution | Represents the topology optimization solution To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSTopologyOptimizationSolutionBuilder Created in NX8.0.0 |
| TBSTopologyOptimizationSolutionBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSTopologyOptimizationSolution |
| TBSTopologyRestrictArea | Represents the restrictions of the design variable in topology optimization To create or edit an instance of this class, use NXOpen::CAE::Optimization::TBSTopologyRestrictAreaBuilder Created in NX8.0.0 |
| TBSTopologyRestrictAreaBuilder | Represents the builder of NXOpen::CAE::Optimization::TBSTopologyRestrictArea To create a new instance of this class, use NXOpen::CAE::Optimization::TBSOptimizationManager::CreateTopologyRestrictAreaBuilder Created in NX8.0.0 |
| TBSTopologySensitivityOptimizationParameters | Represents the parameters to control an optimization in sensitivity strategy Created in NX8.0.0 |
| QualityAudit | Provides classes and interfaces relating to Quality Audit |
| Action | The Quality Audit Action is a base class that performs actions on a list of objects |
| ActionList | The Quality Audit ActionList class offers means to select, deselect, obtain NXOpen::CAE::QualityAudit::Action instances |
| ActionSettings | The Quality Audit ActionSettings is the base class for NXOpen::CAE::QualityAudit::Action settings |
| ComponentConnectivity | This action has as result groups of connected components |
| ComponentSubResult | This result a group of connected components |
| ConnectedComponentsGroupResult | This result a group of connected components |
| ConnectedMeshesGroupResult | This result a group of connected meshes |
| ConnectionDistanceCheck | This action checks the distance between connections |
| ConnectionDistanceResult | The Quality Audit ConnectionPointsDistanceResult is a class containing information about failed distance between connection distance checks on universal connections |
| ConnectionPointsDistanceCheck | This action checks the distance between connection's definition points |
| ConnectionPointsDistanceResult | The Quality Audit ConnectionPointsDistanceResult is a class containing information about failed distance between connection points checks on universal connections |
| ConnectionResult | The ConnectionResult is a class containing information about connections found when performing the NXOpen::CAE::QualityAudit::ListConnections action |
| ConnectionSynthesis | This action has as result the list of all connections from the specified model |
| ConnectionWithComponentsResult | This result contains information about connection and the components it connects |
| ConnectionWithMeshesResult | This result contains information about connection and the meshes it connects |
| FlatnessSettings | This class contains the flatness settings available for the following actions: NXOpen::CAE::QualityAudit::ObjectLevelFlatnessCheck NXOpen::CAE::QualityAudit::MeshLevelFlatnessCheck |
| FreeEdgeDistanceCheck | This action checks if there are connections that are too close to the edge based on a configurable tolerance |
| FreeEdgeDistanceResult | The Quality Audit FreeEdgeDistanceResult contains information about problematic places where distance between connection points and free edges is less than a given value |
| IConnectedComponents | This is an interface to obtain the connected components |
| IConnectedMeshes | This is an interface to obtain the connected meshes |
| InputList | The Quality Audit InputList class offers means to select, deselect, obtain the objects to be used by CAE::QualityAudit::Action instances |
| LengthRangeSettings | This class contains the length range settings available for the following actions: NXOpen::CAE::QualityAudit::ObjectLevelLengthRangeCheck |
| LengthRatioRangeSettings | This class contains the length ratio range settings available for the following actions: NXOpen::CAE::QualityAudit::ObjectLevelLengthRatioRangeCheck NXOpen::CAE::QualityAudit::MeshLevelLengthRatioRangeCheck |
| ListConnections | This action has as result the list of all connections from the specified model |
| ListConnectionsResult | The Quality Audit ListConnectionsResult is a class containing information about connections found when performing the NXOpen::CAE::QualityAudit::ListConnections action |
| ListNonModeledConnections | This action's output is a list of connections that are not realized |
| ListNonModeledConnectionsResult | This is a class containing information about the non modeled universal connections |
| Manager | The Quality Audit Manager class offers means to check for errors at assembly level |
| ManualElementsResult | The Quality Audit ManualElementsResult is a class containing information about nodes connecting components |
| ManualElementsWithComponentsResult | This class contains information about elements connecting components and the connected components |
| ManualElementsWithMeshesResult | This class contains information about elements connecting meshes and the connected meshes |
| MaximumAngleSettings | This class contains the maximum angle settings available for the following actions: NXOpen::CAE::QualityAudit::MeshLevelConnectionAngleCheck NXOpen::CAE::QualityAudit::ObjectLevelConnectionAngleCheck |
| MergedNodesResult | The Quality Audit MergedNodesResult is a class containing information about nodes connecting components |
| MergedNodesWithComponentsResult | This class contains information about nodes connecting components and these components |
| MergedNodesWithMeshesResult | This class contains information about nodes connecting meshes and these meshes |
| MeshConnectivity | This action has as result groups of connected meshes |
| MeshLevelConnectionAngleCheck | This action checks the angle between the normal directions at the projection points on the supports after meshing |
| MeshLevelConnectionAngleResult | The Quality Audit MeshLevelConnectionAngleResult is a class containing information about failed connection angle check on universal connections at mesh level |
| MeshLevelFailedElementCreationResult | The Quality Audit MeshLevelFailedElementCreationResult is a class containing information about failed element creations on universal connections |
| MeshLevelFailedProjectionResult | The Quality Audit MeshLevelFailedProjectionResult is a class containing information about failed projections on universal connections |
| MeshLevelFailedProjectionToleranceResult | The Quality Audit MeshLevelFailedProjectionToleranceResult is a class containing information about mesh projections that failed the tolerance criteria |
| MeshLevelFlatnessCheck | This action checks the flatness around the spot weld after meshing |
| MeshLevelFlatnessResult | The Quality Audit MeshLevelFlatnessResult is a class containing information about failed flatness check on universal connections at mesh level |
| MeshLevelLengthRangeCheck | This action checks the distance between two consecutive supports after meshing |
| MeshLevelLengthRangeResult | The Quality Audit MeshLevelLengthRangeResult is a class containing information about failed length range check on universal connections at mesh level |
| MeshLevelLengthRatioRangeCheck | This action checks the ratio between two consecutive supports after meshing |
| MeshLevelLengthRatioRangeResult | The Quality Audit MeshLevelLengthRatioRangeResult is a class containing information about failed length ratio range check on universal connections at mesh level |
| MeshLevelProjectionCheck | This action has as output the list of failed projections of the universal connections at mesh level |
| MeshSubResult | This result a group of connected meshes |
| MinimumDistanceSettings | This class contains the minimum distance settings available for the following actions: NXOpen::CAE::QualityAudit::FreeEdgeDistanceCheck NXOpen::CAE::QualityAudit::ConnectionDistanceCheck NXOpen::CAE::QualityAudit::ConnectionPointsDistanceCheck |
| NonModeledConnectionResult | This is a class containing information about the non modeled universal connections |
| ObjectLevelConnectionAngleCheck | This action checks the angle between the normal directions at the projection points on the supports before meshing |
| ObjectLevelConnectionAngleResult | The Quality Audit ObjectLevelConnectionAngleResult is a class containing information about failed connection angle check on universal connections at object level |
| ObjectLevelCorrectedProjectionResult | The Quality Audit ObjectLevelCorrectedProjectionResult is a class containing information about corrected projections on universal connections |
| ObjectLevelFailedProjectionResult | The Quality Audit ObjectLevelFailedProjectionResult is a class containing information about failed projections on universal connections |
| ObjectLevelFailedProjectionToleranceResult | The Quality Audit ObjectLevelFailedProjectionToleranceResult is a class containing information about projections that failed the tolerance criteria although the projection itself was successful |
| ObjectLevelFlatnessCheck | This action checks the flatness around the spot weld before meshing |
| ObjectLevelFlatnessResult | The Quality Audit ObjectLevelFlatnessResult is a class containing information about failed flatness check on universal connections at object level |
| ObjectLevelLengthRangeCheck | This action checks the distance between two consecutive supports before meshing |
| ObjectLevelLengthRangeResult | The Quality Audit ObjectLevelLengthRangeResult is a class containing information about failed length range check on universal connections at object level |
| ObjectLevelLengthRatioRangeCheck | This action checks the ratio between two consecutive supports before meshing |
| ObjectLevelLengthRatioRangeResult | The Quality Audit ObjectLevelLengthRatioRangeResult is a class containing information about failed length ratio range check on universal connections at object level |
| ObjectLevelProjectionCheck | This action has as output the list of failed projections of the universal connections at object level |
| ProjectionCheckSettings | This class contains settings used by the projection checks |
| Result | The Quality Audit Result class offers means to access information about specific problems found while performing specific quality audit checks |
| SupportSequenceCheck | This action's output is the list of connections having more than 2 supports with wrong order (e.g |
| UniversalConnectionSynthesisResult | This result represents a group of universal connections having the same property |
| WrongSupportSequenceResult | The Quality Audit WrongSupportSequenceResult is a class containing information about universal connections whose support sequence order is wrong |
| ResponseSimulation | Provides classes and interfaces for Response Simulation |
| BaseBuilder | Represents the abstract builder class for all objects defined in response analysis meta solution This is an abstract class, and cannot be created |
| CombinationEvaluationOptions | Represents the setting for combination evaluation |
| CsdEvaluationSetting | Represents the class of evaluation setting for CSD To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::CsdEvaluationSettingBuilder Created in NX6.0.0 |
| CsdEvaluationSettingBuilder | Represents the CSD build To create a new instance of this class, use NXOpen::CAE::ResponseSimulation::EvaluationSettingManager::CreateCsdEvaluationSettingBuilder Created in NX6.0.0 |
| CSDExcitation | Represents an CSD excitation |
| CSDExcitationBuilder | Represents the manager to NXOpen::CAE::ResponseSimulation::CSDExcitation |
| DataLocation | Represents the data location to perform evaluation Created in NX5.0.0 |
| DDAMComponentData | Represents an excitation on one specified direction |
| DDAMExcitation | Represents an DDAM excitation |
| DDAMExcitationBuilder | Represents the manager to NXOpen::CAE::ResponseSimulation::DDAMExcitation |
| DistributedLoadExcitation | Represents an excitation of distributed-load type To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::DistributedLoadExcitationBuilder Created in NX5.0.0 |
| DistributedLoadExcitationBuilder | Represents the manager to NXOpen::CAE::ResponseSimulation::DistributedLoadExcitation |
| DynamicEvaluationOutputSettings | Represents the output setting for dynamic response evaluation Created in NX5.0.0 |
| DynamicResultEvaluationSetting | Represents the abstract class of evaluation setting for all dynamic results evaluations |
| DynamicResultEvaluationSettingBuilder | Represents the abstract builder class of evaluation setting for all dynamic results evaluations |
| ElementalFunctionEvaluationSetting | Represents the parameters setting for elemental function evaluation |
| ElementalFunctionEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::ElementalFunctionEvaluationSetting class |
| EvaluationParameters | Represents the evaluation parameters for a response simulation meta solution Not support KF |
| EvaluationSetting | Represents the abstract class of all evaluation setting classes |
| EvaluationSettingBuilder | Represents the abstract builder class of all evaluation setting classes |
| EvaluationSettingManager | Represents the manager of all evaluation setting objects |
| Excitation | Represents the abstract class of dynamic excitations This is an abstract class, and cannot be created |
| ExcitationBuilder | Represents the abstract excitation builder class |
| ExcitationCollection | Represents a collection of excitation objects To obtain an instance of this class, refer to NXOpen::CAE::ResponseSimulation::Manager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ExcitationLocationDefinition | Represents the manager to CAE::ResponseSimulation::DistributedLoadExcitation |
| FrequencyDefinition | Represents the frequency setting to perform FRF evaluation Created in NX5.0.0 |
| FrfEvaluationSetting | Represents the parameters setting for FRF results evaluation To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::FrfEvaluationSettingBuilder Created in NX5.0.0 |
| FrfEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::FrfEvaluationSetting class |
| FunctionComponentData | Represents a function component setting of NXOpen::CAE::ResponseSimulation::NodalFunctionExcitation on one direction Created in NX5.0.0 |
| FunctionEvaluationOutputSettings | Represents the output setting for function response evaluation Created in NX5.0.0 |
| FunctionEvaluationSetting | Represents the abstract class of evaluation setting for function response evaluation This is an abstract class, and cannot be created |
| FunctionEvaluationSettingBuilder | Represents the abstract builder class of evaluation setting for function response evaluation This is an abstract class, and cannot be created |
| InitialConditions | Represents the initial condition setting of transient event Created in NX5.0.0 |
| LcrResultsEvaluationSetting | Represents the parameters setting of LCR results evaluation |
| LcrResultsEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::LcrResultsEvaluationSetting class |
| Manager | Represents the Response Dynamics manager to contain all Response Dynamics objects To obtain an instance of this class, refer to NXOpen::CAE::SimSimulation Created in NX5.0.0 |
| ModalProperties | Represents the modal presentation of a response analysis meta solution Created in NX5.0.0 |
| ModalResultsEvaluationSetting | Represents the abstract class of evaluation setting for FRF and transmissibility This is an abstract class, and cannot be created |
| ModalResultsEvaluationSettingBuilder | Represents the abstract builder class of evaluation setting for FRF and transmissibility This is an abstract class, and cannot be created |
| ModeInitialData | Represents the initial setting for a normal mode Created in NX5.0.0 |
| NodalFunctionEvaluationSetting | Represents the parameters setting of nodal function response evaluation |
| NodalFunctionEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::NodalFunctionEvaluationSetting class |
| NodalFunctionExcitation | Represents the abstract class of nodal function excitation This is an abstract class, and cannot be created |
| NodalFunctionExcitationBuilder | Represents the manager to NXOpen::CAE::ResponseSimulation::NodalFunctionExcitation |
| NormalMode | Represents the properties of one normal mode Created in NX5.0.0 |
| ObjectLabel | Represents the setting to label an object |
| PeakValueEvaluationSetting | Represents the parameters setting of peak value evaluation |
| PeakValueEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::PeakValueEvaluationSetting class |
| PhysicalDampingSettings | Represents the physical damping settings for a response simulation meta solution Created in NX6.0.0 |
| PrlResultsEvaluationSetting | Represents the abstract class of evaluation setting for peak value, RMS results and LCR results |
| PrlResultsEvaluationSettingBuilder | Represents the abstract builder class of evaluation setting for peak value, RMS results and LCR results |
| ResponseResultsEvaluationSetting | Represents the parameters setting for response results evaluation |
| ResponseResultsEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::ResponseResultsEvaluationSetting class |
| RmsResultsEvaluationSetting | Represents the parameters setting for RMS results evaluation in response analysis |
| RmsResultsEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::RmsResultsEvaluationSetting class |
| RotationalDDAMExcitation | Represents an DDAM excitation |
| RotationalDDAMExcitationBuilder | Represents the manager to CAE::ResponseSimulation::DDAMExcitation |
| RotationalNodalFunctionExcitation | Represents a rotational nodal function excitation To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::RotationalNodalFunctionExcitationBuilder Created in NX5.0.0 |
| RotationalNodalFunctionExcitationBuilder | Represents the manager to NXOpen::CAE::ResponseSimulation::RotationalNodalFunctionExcitation |
| RSDisplayObject | Represents a BC display attributes |
| RSEvent | Represents a response analysis event To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::RSEventBuilder Created in NX5.0.0 |
| RSEventAttributes | Represents all possible attributes setting for response analysis event Created in NX5.0.0 |
| RSEventBuilder | Represents the manager of CAE.ResponseSimulation.RSEvent |
| RSEventCollection | Represents a collection of response analysis event To obtain an instance of this class, refer to NXOpen::CAE::ResponseSimulation::Manager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| RSEventOutputSetting | Reprensents the output setting for an event Created in NX5.0.0 |
| RSEventSolverParameters | Represents a response analysis event Created in NX5.0.0 |
| Sensor | Represents a NXOpen::CAE::ResponseSimulation::Sensor To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::SensorBuilder Created in NX5.0.0 |
| SensorBuilder | Represents a NXOpen::CAE::ResponseSimulation::SensorBuilder To create a new instance of this class, use NXOpen::CAE::ResponseSimulation::SensorCollection::CreateSensorBuilder Created in NX5.0.0 |
| SensorCollection | Represents a collection of response analysis sensor To obtain an instance of this class, refer to NXOpen::CAE::ResponseSimulation::Manager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SensorEvaluationSetting | Represents the parameters setting for sensor evaluation |
| SensorEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::SensorEvaluationSetting class |
| Solution | Represents a meta solution providing response analysis functionalities in the .sim file To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::SolutionBuilder Created in NX5.0.0 |
| SolutionAttributes | Represents attributes setting of response analysis meta solution Created in NX6.0.0 |
| SolutionBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::Solution class |
| SolutionCollection | Represents a collection of response analysis meta solution To obtain an instance of this class, refer to NXOpen::CAE::ResponseSimulation::Manager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| StaticLoadExcitation | Represents an excitation of static load type To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::StaticLoadExcitationBuilder Created in NX6.0.0 |
| StaticLoadExcitationBuilder | Represents the manager to NXOpen::CAE::ResponseSimulation::StaticLoadExcitation |
| StrainGage | Represents a NXOpen::CAE::ResponseSimulation::StrainGage To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::StrainGageBuilder Created in NX6.0.0 |
| StrainGageBuilder | Represents a StrainGageBuilder To create a new instance of this class, use NXOpen::CAE::ResponseSimulation::StrainGageCollection::CreateStrainGageBuilder Default values |
| StrainGageCollection | Represents a collection of response analysis strain gage To obtain an instance of this class, refer to NXOpen::CAE::ResponseSimulation::Manager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| StrainGageEvaluationSetting | Represents the parameters setting for strain gage evaluation |
| StrainGageEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::StrainGageEvaluationSetting class |
| StrengthResultsEvaluationSetting | Represents parameters setting for strength results evaluation |
| StrengthResultsEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::StrengthResultsEvaluationSetting class |
| TranslationalDDAMExcitation | Represents an DDAM excitation |
| TranslationalDDAMExcitationBuilder | Represents the manager to CAE::ResponseSimulation::DDAMExcitation |
| TranslationalNodalFunctionExcitation | Represents a translational nodal function excitation To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::TranslationalNodalFunctionExcitationBuilder Created in NX5.0.0 |
| TranslationalNodalFunctionExcitationBuilder | Represents the manager to NXOpen::CAE::ResponseSimulation::TranslationalNodalFunctionExcitation |
| TransmissibilityEvaluationSetting | Represents parameters setting for transmissibility evaluation To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::TransmissibilityEvaluationSettingBuilder Created in NX5.0.0 |
| TransmissibilityEvaluationSettingBuilder | This is a manager to the NXOpen::CAE::ResponseSimulation::TransmissibilityEvaluationSetting class |
| VelocityImpactDirection | Represents a NXOpen::CAE::ResponseSimulation::VelocityImpactDirection |
| VelocityImpactExcitation | Represents a velocity impact excitation To create or edit an instance of this class, use NXOpen::CAE::ResponseSimulation::VelocityImpactExcitationBuilder Created in NX6.0.0 |
| VelocityImpactExcitationBuilder | Represents a NXOpen::CAE::ResponseSimulation::VelocityImpactExcitationBuilder To create a new instance of this class, use NXOpen::CAE::ResponseSimulation::ExcitationCollection::CreateVelocityImpactExcitationBuilder Default values |
| VelocityImpactParameters | Represents a NXOpen::CAE::ResponseSimulation::VelocityImpactParameters |
| Xyplot | Provides classes and interfaces for XY Graphing |
| AngleAxisStyleSetting | Represents the angle axis display style |
| ArgumentAxisStyleSetting | Represents the argument axis display style |
| AxisItemStyle | Represents the axis item display style |
| AxisLabelStyle | Represents the axis label display style |
| AxisModel | Represents an axis model object on a XY graphing |
| AxisStyleSetting | Represents the axis display style |
| AxisYStyleSetting | Represents the axis y display style |
| BarChartPlot | Manages the display of bar chart plot |
| BarChartStyleSetting | Represents the bar chart display style |
| BarStyle2DSetting | Represents the 2d bar display style |
| BarStyle3DSetting | Represents the 3d bar display style |
| BaseBarStyleSetting | Represents the base bar display style |
| BaseDisplayStyleSetting | Represent an abstract object on display style |
| BaseGridLayoutStyleSetting | Represents the base grid layout display style |
| BaseLineStyleSetting | Represents the base line display style |
| BaseModel | Represents an abstract component object on a XY graphing |
| BasePlotParameters | Represents the parameters passed to create or modify a plot |
| BaseSymbolStyleSetting | Represents the base symbol display style |
| BaseTemplateManager | Manages the graph template Not support KF |
| BasicModel | Represents a abstract component object on a XY graphing |
| ColorAxisStyleSetting | Represents the axis display style |
| ColorBarPlot | Manages the display of color bar plot |
| ColorMapGraph | Manages the display color map graph |
| ColorMapPlot | Manages the display of color map plot |
| ColorScaleStyle | Represents the color scale display style |
| CurveDisplaySettings | Represents the curve display style |
| CustomTextStyleSetting | Represents the text content definition in title options |
| DataExporter | XYPlot exporter function handler To obtain an instance of this class use NXOpen::CAE::Xyplot::XYPlotManager::DataExporter |
| DataExportParameters | Represents the parameters passed to export the data of a plot |
| DiagramDisplayStyles | Manages the diagram display styles |
| DiagramDisplayStyles2D | Manages the display styles for 2D diagram |
| DiagramDisplayStyles2DBarChart | Manages the 2D bar chart diagram display styles |
| DisplayDataExportParameters | Represents the parameter settings for export display data |
| FormulaExpressionStyle | Represents the formula expression style |
| FormulaGridStyle | Manages the formula grid style |
| GeneralDisplayStyles | Manages the general display styles |
| GeneralDisplayStyles2D | Manages the general display styles for 2D plot |
| GeneralDisplayStyles2DBarChart | Manages the general display styles for 2D bar chart plot |
| GeneralDisplayStyles2DColorContour | Manages the general display styles for 2D color contour plot |
| GeneralDisplayStyles3D | Manages the general display styles for 3D plot |
| GeneralDisplayStylesMatrix2D | Manages the general display styles for matrix 2D plot |
| Graph | Manages the display graph |
| Graph3D | Manages the display graph 3d |
| GraphNameStyle | Represents the graph name display style |
| GraphOptionsStyle2D | Manages the specific settings for 2D graph |
| GridLayoutStyle2DSetting | Represents the 2d grid layout display style |
| GridLayoutStyle3DSetting | Represents the 3d grid layout display style |
| GridStyle2DColorContour | Manages the grid styles for colorbar and colormap plot |
| I2DDataPlot | Represents a plot interface which input should be a series of 2D data |
| I3DDataGraph | Represents a graph interface which input is 3D data |
| I3DDataPlot | Represents a plot interface which input is 3D data |
| IAxisStyle | Represents the axis style setting interface |
| ICurveDisplaySettings | Represents the interface for curve display style classes |
| IDisplayableModel | This class represents an interface to the XYPLOT displayable model |
| IDisplayStyle | Represents the interface for plot display style classes Created in NX9.0.0 |
| IVisibleDisplayStyle | Represents the interface for visible display style classes |
| LeaderStyle | Manages the Leader display styles |
| LegendTable | Manages the legend table |
| LegendTableGroupStyle | Manages the legend table group styles |
| LegendTableStyle | Manages the legend table styles |
| LegendTableTextStyle | Manages the legend table text styles |
| LineStyle2DSetting | Represents the 2d line display style |
| LineStyle3DSetting | Represents the 3d line display style |
| MarkerModel | Represents a marker object on a plotting graph |
| MarkerStyleSetting | Represents the marker display style |
| MatrixGraph2D | Manages the display matrix graph 2d |
| MatrixPlot2D | Manages the display of matrix plot 2d |
| NoteModel | Represents a note object on a plot |
| NoteStyleSetting | Represents the note display style |
| OverlayParameters | Represents the parameters passed to overlay plot records on an existing plot graph |
| PanStyle | Represents the pan display style |
| Plot | Manages the plot template Not support KF |
| Plot2D | Manages the display of 2D plot |
| Plot3D | Manages the display of 3D plot |
| PlotGraphTemplate | Manages the plot graph template |
| PlotParameters | Represents the parameters passed to create a plot |
| Preference | Manages the preference data |
| ProbingStyle | Manages the probing display styles |
| ResultLegendStyle | Represents the result legend style |
| ScatterStyleSetting | Represents the scatter display style |
| SourceDataExportParameters | Represents the parameter settings for exporting source data |
| StackedPlot | Manages the display of stacked plot |
| SurfaceStyleSetting | Represents the surface display style |
| TextBoxStyleSetting | Represents the text box display style |
| TextStyleSetting | Represents the text display style |
| UnknownResultScaleStyle | Represents the axis display style |
| VectorStyle2DSetting | Represents the 2D vector display style |
| WallDisplayStyles | Manages the wall display styles |
| WallDisplayStyles2D | Manages the 2D wall display styles |
| WallDisplayStyles2DBarChart | Manages the 2D bar chart wall display styles |
| WallDisplayStyles3D | Manages the 3D wall display styles |
| WindowManager | Manages the separate graphic windows |
| XYPlotManager | XYPlot function manager To obtain an instance of this class use NXOpen::Session::XYPlotManager |
| AbstractionManager | Provides method for creating builder for abstraction commands in a fem part |
| AcousticPostEnvironment | Represents a NXOpen::CAE::AcousticPostEnvironment of Acoustic Environment Settings Not support KF |
| Acoustics | Represents the acoustics manager |
| AdaptivityExclusionZone | Represents a NXOpen::CAE::AdaptivityExclusionZone |
| AdaptivityExclusionZoneBuilder | Builds a NXOpen::CAE::AdaptivityExclusionZone object which represets adaptivity meta solution related exclusion zones |
| AdaptivityExclusionZoneCollection | Represents a collection of correl meta solution |
| iterator | Iterator for accessing the contents of the collection |
| AdaptivityMetaSolution | Represents a NXOpen::CAE::AdaptivityMetaSolution |
| AdaptivityMetaSolutionBuilder | Builds a NXOpen::CAE::AdaptivityMetaSolution object which represets a recipe for generating adaptive remesh |
| AdaptivityMetaSolutionCollection | Represents a collection of adaptivity meta solution |
| iterator | Iterator for accessing the contents of the collection |
| AdjacentFaceMethod | Represents the output from the adjacent face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| AeroStructManager | Represents the Aerosizing manager that contains all Aerosizing objects |
| AfuAbscissaHeaderInfo | Represents the data to define abscissa header information for an afu record |
| AfuData | Data used to create an AFU Data Record Created in NX4.0.0 |
| AfuDataConvertor | Convert data values for the AFU Data Record To obtain an instance of this class, refer to NXOpen::CAE::AfuManager Created in NX5.0.0 |
| AfuHeaderId | Data used to create header id information for an AFU Data Record Created in NX5.0.0 |
| AfuManager | Provides methods to manipulate AFU file or AFU record |
| AfuMathFastRMSInfo | Represents the Fast RMS parameter information |
| AfuMathFastRMSOutput | Represents the Fast RMS output information |
| AfuMathOperation | Does math operations on the AFU Data Records To obtain an instance of this class, refer to NXOpen::CAE::AfuManager Created in NX5.0.0 |
| AfuOrdinateHeaderInfo | Represents the ordinate header information for an afu record |
| AfuZHeaderInfo | Represents the Z axis header information for an afu record |
| AlternateFemRepresentationSource | This is the class representing a Alternate Fem Representation Source |
| NameIdentifierPair | The structure for a {name, identifier} pair |
| NameLabelPair | The structure for a {name, label} pair |
| AlternateFemRepresentationSourceBuilder | Represents a NXOpen::CAE::AlternateFemRepresentationSourceBuilder which can be used to create FemDataSets |
| AlternateFemRepSelectionRecipe | Represents a Selection Recipe dedicated to Alternate Fem Representations |
| ArbitraryMeshBoundingVolume | Represents Arbitrary Mesh Bounding Volume for Selection Recipe This is a sub object Created in NX1847.0.0 |
| ArbitraryPolygonBodyBoundingVolume | Represents Arbitrary Polygon Body Bounding Volume for Selection Recipe This is a sub object Created in NX1847.0.0 |
| AssignNodalCSBuilder | Represents a NXOpen::CAE::AssignNodalCSBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementInfoManager::CreateAssignNodalCsBuilder Default values |
| AssociationUtilities | Represents Physical NXOpen::CAE::AssociationUtilities class To obtain an instance of this class, refer to NXOpen::CAE::CaeSession Created in NX11.0.0 |
| AssyFEModel | This class represents an Assembly Finite Element Model |
| AssyFemPart | Represents an NX part of type .afm |
| AttachElementsBuilder | Represents a NXOpen::CAE::AttachElementsBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateAttachElementsBuilder Created in NX11.0.0 |
| AttributeSelectionRecipe | Represents a Selection Recipe based on attributes |
| AtvSet | This is the class representing a Atv result set |
| AtvSetBuilder | Represents a NXOpen::CAE::AtvSetBuilder which can be used to create ATVSets |
| AtvSetCollection | This class is a collection of NXOpen::CAE::AtvSet |
| iterator | Iterator for accessing the contents of the collection |
| AutoBCBuilder | Builds one or more NXOpen::CAE::SimSimulationObject object(s) |
| AutoCyclicSymmetryPairsBuilder | Builds a NXOpen::CAE::AutoPairs object which represents a recipe for generating face pairs from a selected set of faces in the model |
| AutoHealGeometryBuilder | Builder for creating Auto Heal Geometry To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateAutoHealGeometryBuilder Default values |
| AutoMacViewerBuilder | Represents the correlation pairing viewer builder To create a new instance of this class, use NXOpen::CAE::PreTestSolutionCollection::CreateAutoMacViewerBuilder Created in NX6.0.0 |
| AutomaticMorphBuilder | Represents a NXOpen::CAE::AutomaticMorphBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateAutomaticMorphBuilder Created in NX9.0.0 |
| AutomaticSweepBetweenSelection | Builder for creating Manual Hex Mesh - Face Dependency type - Multi Face Automatic To create a new instance of this class, use NXOpen::CAE::SweepBetweenMeshBuilder::AutomaticSweepBetween |
| AutoPairs | Represents an autopairs obj |
| AutoPairsBuilder | Builds a NXOpen::CAE::AutoPairs object which represets a recipe for generating face pairs from a selected set of faces or solids in the model whose distance is less than a specified tolerance |
| AxiSymmetricParameters | Implementation of axi-symmetry utility To obtain an instance of this class use |
| BaseFEModel | This class represents an Assembly Finite Element Model |
| BaseFemPart | Represents an NX part of type .afm |
| BaseIteration | This class provides interfaces to query iteration attributes An instance of this class can not be obtained Created in NX7.5.0 |
| BaseLoadcase | This class provides interfaces to query loadcase attributes An instance of this class can not be obtained Created in NX7.5.0 |
| BaseResultType | This class provides interfaces to query result type attributes An instance of this class can not be obtained Created in NX7.5.0 |
| BcLabelManagerBuilder | Represents a NXOpen::CAE::BcLabelManagerBuilder builder which can be used to renumber NXOpen::CAE::SimBC id |
| BCSelectionDisplayBuilder | This class provides BC Selection Visual Display support, use this class to get the BC types in current solution, adds special BCs to list, and display the BC's selection geometry with the BC's color to do visually check To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateBcSelectionDisplayBuilder Default values |
| BeamEADBuilder | This class provides Beam/Bar Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateBeamEadBuilder Default values |
| BeamElementInfo | Represents a Beam Element Information |
| BeamElementInfoHandler | Represents a Beam Element Information Hanlder |
| BeamSection | Represents a Beam Cross Section This is an abstract class |
| Properties | Represents the properties of the beam section |
| BeamSectionCollection | Represents the collection of all NXOpen::CAE::BeamSection in a fem part |
| iterator | Iterator for accessing the contents of the collection |
| BeamSectionOccurrence | Represents an occurrence of beam section in a FEM assembly or simulation part Created in NX12.0.1 |
| BeamSectionOffsetOptions | To create a new instance of this class, use NXOpen::CAE::CaePart::NewBeamSectionOffsetOptions Created in NX7.5.0 |
| Offset | Represents the offset value |
| BeamSectionOptions | Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file |
| BeamSectionOrientationOptions | To create a new instance of this class, use NXOpen::CAE::CaePart::NewBeamSectionOrientationOptions Created in NX7.5.0 |
| BeamSectionsCollection | Represents the collection of all NXOpen::CAE::BeamSection in a fem part |
| iterator | Iterator for accessing the contents of the collection |
| Bolt | Represents Bolt To create or edit an instance of this class, use NXOpen::CAE::BoltBuilder Created in NX7.5.0 |
| BoltBuilder | Represents a NXOpen::CAE::BoltBuilder To create a new instance of this class, use NXOpen::CAE::BoltCollection::CreateBoltBuilder Created in NX7.5.0 |
| BoltCollection | Provides method for creating builder for bolt operation commands in a fem/afem part |
| iterator | Iterator for accessing the contents of the collection |
| BoundingVolumePrimitive | Represents a Bounding Volume Primitive class NXOpen::CAE::BoundingVolumePrimitive |
| BoundingVolumeSelectionRecipe | Represents Bounding Volume based Selection Recipe To obtain an instance of this object use one of the creator in NXOpen::CAE::SelectionRecipeCollection |
| BoxBoundingVolume | Represents Box Bounding Volume for Selection Recipe This is a sub object Created in NX12.0.0 |
| BushingEADBuilder | This class provides Bushing Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateBushingEadBuilder Created in NX7.5.0 |
| CacheResultRecipe | Represents a NXOpen::CAE::CacheResultRecipe Manager class to delete and find cached result recipes |
| CacheResultRecipeBuilder | Represents a NXOpen::CAE::CacheResultRecipeBuilder Cached result types will used during the post processing workflows |
| CacheResultRecipeManager | Represents a NXOpen::CAE::CacheResultRecipeManager Cached result type objects lifecycle is manager using this class To obtain an instance of this class use NXOpen::Session::ResultManager |
| CADModeling | Method to create cad face using polygon face To obtain an instance of this class, refer to NXOpen::CAE::FemPart Created in NX8.5.0 |
| CAEBody | Represents a CAE body geometry |
| CAEConnection | Represents Connection Recipe To create or edit an instance of this class, use NXOpen::CAE::CAEConnectionBuilder Created in NX6.0.0 |
| CAEConnectionBuilder | Represents a NXOpen::CAE::CAEConnectionBuilder which can be used to create 1D connections |
| CAEConnectionCollection | Provides method for creating builder for connection operation commands in a fem/afem part |
| iterator | Iterator for accessing the contents of the collection |
| CaeDataContainer | Represents a list of named properties, where the property name is a unique string |
| CaeDOFSet | Represents a dofset class NXOpen::CAE::CaeDOFSet |
| CaeDOFSetCollection | Provides methods for managing DOFSet NXOpen::CAE::CaeDOFSet |
| iterator | Iterator for accessing the contents of the collection |
| CaeDOFSetDisplay | Represents a DOF Set display attributes |
| CAEEdge | Represents a CAE edge geometry |
| CAEFace | Represents a CAE face geometry |
| CaeGroup | Represents a group class NXOpen::CAE::CaeGroup |
| CaeGroupCollection | Provides methods for managing set NXOpen::CAE::CaeGroup |
| AutoGroupErrorCodes | Contains list of error codes for each auto group type |
| AutoGroupSeedNames | Contains the prefix seed names to be given to auto created groups by type If a seed value is passed as NULL, then the auto created groups by that type will be given a default prefix List of default prefixes are as follows: MAT- for material_seed PPT- for ppt_seed Color- for color_seed XSECT- for section_seed LAM- for laminate seed DIM- for dimension seed FE_TYPE- for meshcolltype_seed ACROSS- for connected across assembly component seed |
| AutoGroupTypes | Contains information about the types by which we do auto grouping |
| iterator | Iterator for accessing the contents of the collection |
| CaeLabel | Represents an object that manages annotation for CAE To obtain an instance of this object use on of the creator in NXOpen::CAE::NoteCollection |
| CaeNote | Represents an object that manages annotation for CAE To obtain an instance of this object use on of the creator in NXOpen::CAE::NoteCollection |
| CaeNoteBuilder | Represents a CAE note builder class To create a new instance of this class, use NXOpen::CAE::NoteManager::CreateCaeNoteBuilder Created in NX12.0.0 |
| CaePart | This is an abstract class for NX parts of type .fem and .sim |
| CaeRegion | Represents a cae region object |
| CaeRegionBuilder | Represents a NXOpen::CAE::CaeRegionBuilder builder To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateCaeRegionBuilder Created in NX7.0.0 |
| CaeRegionCollection | Provides methods for managing CAE::CaeRegion in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| CaeSensor | Represents a NXOpen::CAE::CaeSensor This is a sub object Created in NX1847.0.0 |
| CaeSession | This class provides access to all session related CAE functionality |
| CAESet | Represents a group of CAE object sets |
| CAEVertex | Represents a CAE vertex geometry |
| CAEWeldConnection | Represents WeldConnection Recipe To create or edit an instance of this class, use NXOpen::CAE::CAEWeldConnectionBuilder Created in NX6.0.0 |
| CAEWeldConnectionBuilder | Builder for creating 1D Weld Connection To create a new instance of this class, use NXOpen::CAE::CAEConnectionCollection::CreateWeldConnectionBuilder Created in NX6.0.0 |
| CfdAutoRefinementConstraint | The automatic refinement constraint is used by surface wrap recipes To create or edit an instance of this class, use NXOpen::CAE::CfdAutoRefinementConstraintBuilder Created in NX11.0.0 |
| CfdAutoRefinementConstraintBuilder | Represents a NXOpen::CAE::CfdAutoRefinementConstraint builder To create a new instance of this class, use NXOpen::CAE::CfdAutoRefinementConstraintCollection::CreateBuilder Created in NX11.0.0 |
| CfdAutoRefinementConstraintCollection | Provides methods for managing automatic refinement constraintsCAE::CfdAutoRefinementConstraint in a fem part |
| iterator | Iterator for accessing the contents of the collection |
| CfdContactPreventionConstraint | The contact prevention constraint is a type of constraint which is used by the Fluid Domain Recipe to generate a fluid domain |
| CfdContactPreventionConstraintBuilder | Represents a NXOpen::CAE::CfdContactPreventionConstraint builder To create a new instance of this class, use NXOpen::CAE::CfdContactPreventionConstraintCollection::CreateBuilder Created in NX9.0.0 |
| CfdContactPreventionConstraintCollection | Provides methods for managing Contact Prevention ConstraintsCAE::CfdContactPreventionConstraint in a fem part |
| iterator | Iterator for accessing the contents of the collection |
| CfdLocalResolutionConstraint | The local resolution constraint is a type of constraint which is used by the Fluid Domain Recipe to generate a fluid domain |
| CfdLocalResolutionConstraintBuilder | Represents a NXOpen::CAE::CfdLocalResolutionConstraint builder To create a new instance of this class, use NXOpen::CAE::CfdLocalResolutionConstraintCollection::CreateBuilder Created in NX9.0.0 |
| CfdLocalResolutionConstraintCollection | Provides methods for managing Local Resolution ConstraintsCAE::CfdLocalResolutionConstraint in a fem part |
| iterator | Iterator for accessing the contents of the collection |
| CircularEdgeMethod | Represents the output from the circular edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX7.5.0 |
| CircularImprintBuilder | Builder for creating Circular Imprint To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateCircularImprintBuilder Created in NX7.5.0 |
| ClippingParameters | This class is worked as a packet of information that can be used to set the clipping parameters of a NXOpen::CAE::Post object |
| ComacViewerBuilder | Represents the correlation MAC matrix viewer builder To create a new instance of this class, use NXOpen::CAE::CorrelSolutionCollection::CreateComacViewerBuilder Created in NX6.0.0 |
| CombineTrisBuilder | Builder for creating Combine Tris To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateCombineTrisBuilder Created in NX7.0.0 |
| CompanionResult | Represents additional results data that will augment a primary set of Analysis results associated to a NXOpen::CAE::SimSolution |
| CompanionResultBuilder | Represents a NXOpen::CAE::CompanionResult builder and can be used to create or edit an NXOpen::CAE::CompanionResult To create a new instance of this class, use NXOpen::CAE::CompanionResultCollection::CreateCompanionResultBuilder Default values |
| CompanionResultCollection | Provides methods for managing CompanionResults NXOpen::CAE::CompanionResult in a NXOpen::CAE::SimResultReference |
| iterator | Iterator for accessing the contents of the collection |
| Complex | A complex number Created in NX11.0.0 |
| ConflictResolutionBuilder | Represents a NXOpen::CAE::ConflictResolutionBuilder builder which can resolve conflicts between the two input BCs by a specified rule To create a new instance of this class, use NXOpen::CAE::SimSolution::CreateConflictResolutionBuilder Created in NX10.0.0 |
| ContactMeshBuilder | Represents a NXOpen::CAE::ContactMeshBuilder To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateContactMeshBuilder Created in NX10.0.0 |
| ConvertToConvergentBodyBuilder | Builder for creating a convergent body from CAE.CAEBody To create a new instance of this class, use NXOpen::CAE::CaePart::CreateConvertToConvergentBodyBuilder Created in NX12.0.0 |
| ConvexMeshBuilder | Represents a NXOpen::CAE::ConvexMeshBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateConvexMeshBuilder Default values |
| CoordinateSelectionRecipe | Represents a single node selection recipe based on coordinates |
| CorrelAlignmentBuilder | This builder is used to control the alignment parameters of a NXOpen::CAE::CorrelSolution To create a new instance of this class, use NXOpen::CAE::SimSolution::CreateAlignmentBuilder |
| ReferencePt | Specifies the data for the selected reference points |
| CorrelApplyAlignmentFromBuilder | This builder is used to apply the alignment matrix read from selected xml file to the test model To create a new instance of this class, use NXOpen::CAE::CorrelManager::CreateCorrelApplyAlignmentFromBuilder Created in NX9.0.0 |
| CorrelBaseBuilder | Represents the abstract builder class for all objects defined in correl meta solution This is an abstract class, and cannot be created |
| CorrelFineTuneAlignmentBuilder | This builder is used to nudge the alignment by a fine adjustment To create a new instance of this class, use NXOpen::CAE::CorrelManager::CreateCorrelFineTuneAlignmentBuilder Created in NX9.0.0 |
| CorrelManager | Represents the correl manager that contains all correl and pre-test objects To obtain an instance of this class, refer to NXOpen::CAE::SimSimulation Created in NX6.0.0 |
| CorrelModePairingBuilder | This builder is used to control the mode pairing behavior of a NXOpen::CAE::CorrelSolution To create a new instance of this class, use NXOpen::CAE::CorrelSolution::CreateModePairingBuilder Created in NX6.0.1 |
| CorrelSolution | Represents a NXOpen::CAE::CorrelSolution , which is a meta-solution used to compare results from two structural dynamics solutions To create or edit an instance of this class, use NXOpen::CAE::CorrelSolutionBuilder Created in NX6.0.0 |
| CorrelSolutionBuilder | This is a manager to the CAE::CorrelSolution class |
| CorrelSolutionCollection | Represents a collection of correl meta solution To obtain an instance of this class, refer to NXOpen::CAE::CorrelManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CreateJtBuilder | Represents a NXOpen::CAE::CreateJtBuilder To obtain an instance of this class use NXOpen::Session::ResultManager |
| CrossSectionParameters | This class is worked as a packet of information that can be used to change cross-section state |
| CurveOperation | Provides methods to evaluate curve expressions |
| CyclicSymmetricParameters | Implementation of axi-symmetry utility To obtain an instance of this class use |
| CylinderBoundingVolume | Represents Box Bounding Volume for Selection Recipe This is a sub object Created in NX12.0.0 |
| CylinderFaceMethod | Represents the output from the cylinder face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| DamperEADBuilder | This class provides Damper Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateDamperEadBuilder Default values |
| DataProcessing | Represents a NXOpen::CAE::DataProcessing |
| DataProcessingBlock | Represents a NXOpen::CAE::DataProcessingBlock |
| DataProcessingBlockBuilder | Builds a NXOpen::CAE::DataProcessingBlock object which represets a data processing block |
| DataProcessingBlockCollection | Represents a collection of DPM events |
| iterator | Iterator for accessing the contents of the collection |
| DataProcessingBuilder | Builds a NXOpen::CAE::DataProcessing object which represets a data processing meta solution |
| DataProcessingCollection | Represents a collection of Data Processing meta solution |
| iterator | Iterator for accessing the contents of the collection |
| DataReaderDatabaseOptions | Exposes the options that can be set when opening a database |
| DataReaderOptionBase | Base class for the all the option types exposed by the data reader |
| DataReaderOptionCollection | This class is a collection of NXOpen::CAE::DataReaderOptionBase |
| iterator | Iterator for accessing the contents of the collection |
| DataReaderOptionDouble | Specialization of a NXOpen::CAE::DataReaderOptionBase to handle double values |
| DataReaderOptionEnum | Specialization of a NXOpen::CAE::DataReaderOptionBase to handle enumerated values |
| DataReaderOptionInt | Specialization of a NXOpen::CAE::DataReaderOptionBase to handle integer values |
| DataReaderOptionString | Specialization of a NXOpen::CAE::DataReaderOptionBase to handle string values |
| DataReaderOptionUnit | Specialization of a NXOpen::CAE::DataReaderOptionBase to handle units |
| DataReaderUnitCollection | This class is a collection of NXOpen::Unit |
| iterator | Iterator for accessing the contents of the collection |
| DataSource | This is the class representing a scenario data source |
| DataSourceBuilder | Represents a NXOpen::CAE::DataSourceBuilder which can be used to create scenario data sources |
| DataSourceCollection | This class is a collection of NXOpen::CAE::DataSource |
| iterator | Iterator for accessing the contents of the collection |
| DefaultFormatHandler | Represents the default format handler associated to data sources which require no special options to be read |
| DeformationParameters | This class is worked as a packet of information that can be be used to deform NXOpen::CAE::Post objects |
| DeletePolygonFaceBuilder | Builder for Delete Polygon Face To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateDeletePolygonFaceBuilder Created in NX8.5.0 |
| DeleteUnreferencedEntitiesBuilder | Represents a NXOpen::CAE::DeleteUnreferencedEntitiesBuilder builder which can be used to delete entites (by category) that are not referenced by the active solution of the simulation To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateDeleteUnreferencedEntitiesBuilder Default values |
| DependentMesh | Represents Mesh Recipe To create or edit an instance of this class, use NXOpen::CAE::DependentMeshBuilder Created in NX5.0.0 |
| DependentMeshBuilder | Represents a NXOpen::CAE::Mesh2d To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateDependentMeshBuilder Created in NX5.0.0 |
| DependentMeshListItemBuilder | Represents a NXOpen::CAE::DependentMeshListItemBuilder To create a new instance of this class, use NXOpen::CAE::DependentMeshBuilder::CreateNewListItem Created in NX5.0.0 |
| DependentMeshListItemBuilderList | Represents a list of objects |
| DestinationCollectorBuilder | Represents a Element Collector Container (Ecc) selection |
| DisplayNodalCsysBuilder | Represents a CAE::DisplayNodalCsysBuilder |
| DofTerm | Used to specify a term of the Degree of freedom |
| DurabilityAxisSearch | Represents a NXOpen::CAE::DurabilityAxisSearch |
| DurabilityAxisSearchCollection | Represents a collection of stress axes |
| iterator | Iterator for accessing the contents of the collection |
| DurabilityDamageEvaluationBuilder | Represents the builder for evaluating durability damage |
| DurabilityDataControlBuilder | Represents a builder class for the transient event data control |
| DurabilityEvaluateFatigueHistoryBuilder | Represents the builder for evaluating fatigue histories |
| DurabilityEvent | Represents a NXOpen::CAE::DurabilityEvent , which is an event of a durability solution process |
| DurabilityEventBuilder | Represents the abstract builder class for all durability events |
| DurabilityEventCollection | Represents a collection of durability events |
| iterator | Iterator for accessing the contents of the collection |
| DurabilityEventFatigueSettingsBuilder | Represents a builder class for the event fatigue settings |
| DurabilityEventOverridesBuilder | Represents a builder class for Event Overrides |
| DurabilityEventSolverBuilder | Represents the builder for solving the durability event |
| DurabilityEventStrengthSettingsBuilder | Represents a builder class for the event strength settings |
| DurabilityExcitation | Represents a NXOpen::CAE::DurabilityExcitation |
| DurabilityExcitationBuilder | Represents the abstract builder class for all durability excitations |
| DurabilityExcitationCollection | Represents a collection of durability excitations |
| iterator | Iterator for accessing the contents of the collection |
| DurabilityFatigue | Represents a NXOpen::CAE::DurabilityFatigue |
| DurabilityFatigueCollection | Represents a collection of event fatigue settings |
| iterator | Iterator for accessing the contents of the collection |
| DurabilityFunctionExcitation | Represents a NXOpen::CAE::DurabilityFunctionExcitation |
| DurabilityFunctionExcitationBuilder | Represents a NXOpen::CAE::DurabilityFunctionExcitation builder |
| DurabilityLoadPattern | Represents a NXOpen::CAE::DurabilityLoadPattern |
| DurabilityLoadPatternBuilder | Represents a CAE::DurabilityLoadPattern builder |
| DurabilityManager | Represents the durability manager that contains all durability objects |
| DurabilityMetaSolution | Represents a NXOpen::CAE::DurabilityMetaSolution |
| DurabilityMetaSolutionBuilder | Represents a NXOpen::CAE::DurabilityMetaSolution builder |
| DurabilityMetaSolutionCollection | Represents a collection of correl meta solution |
| iterator | Iterator for accessing the contents of the collection |
| DurabilityRandomEvent | Represents a NXOpen::CAE::DurabilityRandomEvent |
| DurabilityRandomEventBuilder | Represents the builder for the random durability event |
| DurabilityRandomFatigue | Represents a NXOpen::CAE::DurabilityRandomFatigue |
| DurabilityRandomFatigueBuilder | Represents a builder class for the event fatigue settings |
| DurabilityRandomFatigueCollection | Represents a collection of random fatigue |
| iterator | Iterator for accessing the contents of the collection |
| DurabilityResultPath | Represents a NXOpen::CAE::DurabilityResultPath |
| DurabilityResultPathBuilder | Represents a NXOpen::CAE::DurabilityResultPath builder |
| DurabilityResultsReportBuilder | Represents the builder for reporting the durability results |
| DurabilitySolveOptions | Represents a NXOpen::CAE::DurabilitySolveOptions |
| DurabilitySolveOptionsCollection | Represents a collection of correl meta solution |
| iterator | Iterator for accessing the contents of the collection |
| DurabilitySolverBuilder | Represents the builder for solving the durability solution process |
| DurabilityStaticEvent | Represents a NXOpen::CAE::DurabilityStaticEvent |
| DurabilityStaticEventBuilder | Represents the builder for the static durability event |
| DurabilityStrainGageAnalyzerBuilder | Represents the builder for analyzing strain gage data |
| DurabilityStrength | Represents a NXOpen::CAE::DurabilityStrength |
| DurabilityStrengthCollection | Represents a collection of event strength settings |
| iterator | Iterator for accessing the contents of the collection |
| DurabilityStressAxesBuilder | Represents a builder class for the event fatigue settings |
| DurabilityTransientEvent | Represents a NXOpen::CAE::DurabilityTransientEvent |
| DurabilityTransientEventBuilder | Represents the builder for the transient durability event |
| DurSpecialistAnalysisType | TODO: Add documentation |
| DurSpecialistAnalysisTypeCollection | Represents a collection of DurSpecialist AnalysisType To obtain an instance of this class, refer to NXOpen::CAE::DurSpecialistManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DurSpecialistBlockLoadEventBuilder | Represents a NXOpen::CAE::DurSpecialistBlockLoadEvent builder |
| DurSpecialistDataSources | Represents a NXOpen::CAE::DurSpecialistDataSources Created in NX12.0.0 |
| DurSpecialistDurWeldSet | Represents a NXOpen::CAE::DurSpecialistDurWeldSet |
| DurSpecialistDurWeldSetBuilder | Represents a CAE::DurSpecialistDurWeldSet builder This is an abstract class, and cannot be created |
| DurSpecialistFlexBodyEventBuilder | Represents a NXOpen::CAE::DurSpecialistFlexBodyEventBuilder builder |
| DurSpecialistLoadEventListBuilder | Represents a NXOpen::CAE::DurSpecialistLoadEventListBuilder builder |
| DurSpecialistLocalDefinitionBuilder | Represents a NXOpen::CAE::DurSpecialistLocalDefinition builder |
| DurSpecialistParameterObject | TODO: Add documentation |
| DurSpecialistResultTableToggles | Represents a NXOpen::CAE::DurSpecialistResultTableToggles |
| DurSpecialistSimulationObject | Represents a NXOpen::CAE::DurSpecialistSimulationObject |
| DurSpecialistSimulationObjectTable | Represents a NXOpen::CAE::DurSpecialistSimulationObjectTable Created in NX12.0.0 |
| DurSpecialistSolution | Represents a NXOpen::CAE::DurSpecialistSolution |
| DurSpecialistSolutionBuilder | Represents a NXOpen::CAE::DurSpecialistSolution builder |
| DurSpecialistSuperpositionEventBuilder | Represents a builder class for creating and editing an NXOpen::CAE::DurSpecialistSuperpositionEvent |
| EdgeDensity | Represents a CAE edge density |
| EdgeFaceImprintBuilder | Builder for creating Face Face Imprint To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateEdgeFaceImprintBuilder Created in NX11.0.0 |
| EdgePathMethod | Represents a NXOpen::CAE::EdgePathMethod |
| EdgeSeparation | Represents Edge Separation |
| EdgeSeparationConditionBuilder | Represents Edge Separation Condition used to create a NXOpen::CAE::EdgeSeparationConditionBuilder which can be used to create NXOpen::CAE::EdgeSeparation objects |
| EdgeSticherBuilder | Represents a NXOpen::CAE::EdgeSticherBuilder To create a new instance of this class, use NXOpen::CAE::FemPart::CreateEdgeSticherBuilder Default values |
| ElemEdgefaceObject | Structure used to retrieve list of Element Edges or Element Faces in a group |
| ElemEdgePathMethod | Represents a NXOpen::CAE::ElemEdgePathMethod |
| ElementAssociatedDataUtils | Represents a system to access element associated data |
| ElementConnectivityBuilder | Represents a NXOpen::CAE::ElementConnectivityBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementConnectivityBuilder Created in NX5.0.0 |
| ElementCreateBuilder | Represents a NXOpen::CAE::ElementCreateBuilder which allows you to manually create elements from existing nodes |
| ElementDeleteBuilder | Represents a NXOpen::CAE::ElementDeleteBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateDeleteElementBuilder Created in NX5.0.0 |
| ElementDetachBuilder | Represents a NXOpen::CAE::ElementDetachBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementDetachBuilder Created in NX11.0.0 |
| ElementExtractBuilder | Builder for creating Element Extract To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementExtractBuilder Created in NX7.5.0 |
| ElementExtrudeBuilder | Represents a NXOpen::CAE::ElementExtrudeBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementExtrudeBuilder Created in NX5.0.0 |
| ElementInfoUtils | Represents a system to query information about FE-based elements To obtain an instance of this class, refer to NXOpen::CAE::NodeElementManager Created in NX11.0.0 |
| ElementModifyLabelBuilder | Represents a NXOpen::CAE::ElementModifyLabelBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementModifyLabelBuilder Created in NX5.0.0 |
| ElementModifyOrderBuilder | Represents a NXOpen::CAE::ElementModifyOrderBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementModifyOrderBuilder Created in NX6.0.1 |
| ElementModifyTypeBuilder | Represents a NXOpen::CAE::ElementModifyTypeBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementModifyTypeBuilder Created in NX8.5.0 |
| ElementProjectBuilder | Represents a NXOpen::CAE::ElementProjectBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementProjectBuilder Created in NX5.0.0 |
| ElementReflectBuilder | Represents a NXOpen::CAE::ElementReflectBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementReflectBuilder Created in NX5.0.0 |
| ElementRevolveBuilder | Represents a NXOpen::CAE::ElementRevolveBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementRevolveBuilder Created in NX5.0.0 |
| ElementRotateBuilder | Represents a NXOpen::CAE::ElementRotateBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementRotateBuilder Created in NX12.0.0 |
| ElementSplitBuilder | Represents a NXOpen::CAE::ElementSplitBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementSplitBuilder Created in NX5.0.0 |
| ElementTranslateBuilder | Represents a NXOpen::CAE::ElementTranslateBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateElementTranslateBuilder Created in NX5.0.0 |
| ElementTypeBuilder | Represents the specification of the FEA Element Type for a meshing dialog |
| ElementTypes | Represents an NXOpen::CAE::ElementTypes class |
| ElemLabelMethod | Represents the output from the elem label smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| FaceDensity | Represents a CAE face density |
| FaceFaceImprintBuilder | Builder for creating Face Face Imprint To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateFaceFaceImprintBuilder Created in NX11.0.0 |
| FaceFromBoundaryBuilder | Builder for creating Polygon Face by boundary To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateFaceFromBoundaryBuilder Created in NX8.5.0 |
| FeatureEdgeNodeMethod | Represents the output from the feature edge node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| FeatureElemEdgeMethod | Represents the output from the feature element edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| FeatureElemFaceMethod | Represents the output from the feature element face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| FeatureElemMethod | Represents the output from the feature element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| FeatureNodeMethod | Represents the output from the feature node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| FeatureShellElemMethod | Represents the output from the feature shell element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.2 |
| FEElemEdge | Represents a Finite Element Edge which can be shared by more that one element |
| FEElement | Represents a Finite Element |
| FEElementLabelMap | Represents a Elementl Label to an CAE::FEElement map, it can be used to quickly convert a CAE::FEElement label, which is generally used in solver input files and results files, in the element object itself CAE::FEElement |
| FEElemFace | Represents a Finite Element Face |
| FemCreationOptions | Represents the FEM creation options to be used when a FEM part is created |
| FEModel | This class represents a Finite Element Model |
| IdSpecificationObject | Structure to specify the Node, Element, and Physical property table start ids and offsets for use in CAE::FEModel::AppendFemodel |
| FEModelOccAttribute | This class represents an Interface to the Finite Element Model Attributes |
| FEModelOccurrence | This class represents a Finite Element Model Occurrence |
| FemPart | Represents an NX part of type .fem |
| FemSignalProcessingApplication | Implementation of the NXOpen::Fields::IApplication |
| FemSignalProcessingSignalAttributes | Implementation of the NXOpen::Fields::IApplicationData |
| FemSynchronizeOptions | Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file |
| FENode | Represents a Finite Element Node |
| FENodeLabelMap | Represents a Nodel Label to an CAE::FENode map, it can be used to quickly convert a CAE::FENode label, which is generally used in solver input files and results files, in the node object itself CAE::FENode |
| FieldRecipe | Represents a NXOpen::CAE::FieldRecipe To obtain the object of this class use NXOpen::CAE::ResultProbe::GetOutputRecipe Created in NX1847.0.0 |
| FilletFaceMethod | Represents the output from the fillet face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| FilterBodyMethod | Represents the output from the filter bodies smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX1847.0.0 |
| FilterEdgeMethod | Represents the output from the filter edges smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX1847.0.0 |
| FilterElemMethod | Represents the output from the filter element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX1847.0.0 |
| FilterFaceMethod | Represents the output from the filter face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX1847.0.0 |
| FlatPatternsBuilder | Represents a Flat Patterns Builder |
| FluidDomainBuilder | Represents a NXOpen::CAE::FluidDomainRecipe To create a new instance of this class, use NXOpen::CAE::FluidDomainCollection::CreateBuilder Created in NX7.5.2 |
| FluidDomainCollection | Provides methods for managing fluid domainsNXOpen::CAE::FluidDomainRecipe in a fem part |
| iterator | Iterator for accessing the contents of the collection |
| FluidDomainRecipe | Represents a FluidDomainRecipe |
| FormatHandlerCollection | This class is a collection of NXOpen::CAE::IFormatHandler |
| iterator | Iterator for accessing the contents of the collection |
| FreeBodyResultsBuilder | Represents a NXOpen::CAE::FreeBodyResultsBuilder To obtain an instance of this class use NXOpen::Session::ResultManager |
| FreezeGeometryBuilder | Builder for creating Freeze Geometry To create a new instance of this class, use NXOpen::CAE::GeometryRecipeCollection::CreateFreezeGeometryBuilder Created in NX10.0.0 |
| FreezeGeometryRecipe | Represents FreezeGeometryRecipe To create or edit an instance of this class, use NXOpen::CAE::FreezeGeometryBuilder Created in NX10.0.0 |
| FrfSet | This is the class representing a FRF set |
| FrfSetBuilder | Represents a NXOpen::CAE::FrfSetBuilder which can be used to create FrfSets |
| FrfSetCollection | This class is a collection of NXOpen::CAE::FrfSet |
| iterator | Iterator for accessing the contents of the collection |
| Function | Represents a function object To create or edit an instance of this class, use NXOpen::CAE::FunctionBuilder Created in NX5.0.0 |
| FunctionBuilder | This builder class is used to create or edit NXOpen::CAE::Function objects |
| FunctionCollection | Represents a collection of function objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| GapEADBuilder | This class provides Gap Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateGapEadBuilder Created in NX7.5.0 |
| GeneralGeometryBeamSection | Represents a General Geometry Beam Cross Section To create or edit an instance of this class, use NXOpen::CAE::GeneralGeometryBeamSectionBuilder Created in NX7.5.0 |
| GeneralGeometryBeamSectionBuilder | Represents a NXOpen::CAE::GeneralGeometryBeamSectionBuilder To create a new instance of this class, use NXOpen::CAE::BeamSectionsCollection::CreateGeneralGeometryBeamSectionBuilder Created in NX7.5.0 |
| GeometryRecipe | Represents a Geometry Recipe |
| GeometryRecipeCollection | Provides methods for managing set NXOpen::CAE::GeometryRecipe |
| iterator | Iterator for accessing the contents of the collection |
| GlobalLayupImportFromPptBuilder | Represents a Global Layup IMport From Ppt Builder |
| GraphFromResultProbeBuilder | Represents a NXOpen::CAE::GraphFromResultProbeBuilder This is an abstract class and cannot be instantiated Created in NX11.0.0 |
| GraphRecipe | Represents a NXOpen::CAE::GraphRecipe To obtain the object of this class use NXOpen::CAE::ResultProbe::GetOutputRecipe Created in NX1847.0.0 |
| GRMSearch | Contains methods for searching Teamcenter for CAE objects, as well as a cache of already found items |
| GroupByBoundaryBuilder | Represents a CAE::GroupByBoundaryBuilder |
| GroupEdgeMethod | Represents the output from the Group Edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| GroupElemEdgeMethod | Represents the output from the Group Element Edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| GroupElemFaceMethod | Represents the output from the Group Element Face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| GroupElemMethod | Represents the output from the Group Element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| GroupElemMethodElemOption | Represents the output from the Group Element smart selector method |
| GroupFaceMethod | Represents the output from the Group Face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| GroupMethod | Represents the output from the Group smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| GroupNodeMethod | Represents the output from the Group Node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| HoleElementEdgeMethod | Represents the output from the hole element edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| HybridMesh | Represents swept Mesh To create or edit an instance of this class, use NXOpen::CAE::Mesh3dHybridBuilder Created in NX11.0.0 |
| IAncillaryDisplayableEntity | Represents an ANCILLARY_DISPLAYABLE_ENTITY |
| IApplicationObjectManager | Represents a NXOpen::CAE::IApplicationObjectManager |
| IBeamSectionBuilder | Represents a NXOpen::CAE::IBeamSectionBuilder This is an abstract class Created in NX7.5.0 |
| IExportableFEEntity | Represents an EXPORTABLE_FE_ENTITY |
| IFEModel | This class represents an Interface to the Finite Element Model |
| IFolder | This class represents an Interface to the Folder |
| IFormatHandler | Represents a data source format handler |
| IHierarchicalFEModel | This class represents an Interface to the Finite Element Model |
| IMeshCollector | Represents the base IMeshCollector class for MeshCollector and MeshCollectorOccurrence classes |
| IMeshManager | Manages meshesNXOpen::CAE::IMeshManager in cae parts |
| StatusInfo | Contains status information |
| ImportedResult | Represents analysis results for a imported solver results file |
| ImportedSolutionBuilder | Represents a NXOpen::CAE::ImportedSolutionBuilder builder To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateImportedSolutionBuilder Created in NX11.0.0 |
| ImportSimulationBuilder | Represents NXOpen::CAE::ImportSimulationBuilder To create a new instance of this class, use NXOpen::CAE::SimPart::CreateImportSimBuilder Created in NX11.0.0 |
| ImprintBuilder | Builder for creating Imprint To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateImprintBuilder Created in NX11.0.0 |
| InterpolationEADBuilder | This class provides Interpolation Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateInterpolationEadBuilder Created in NX11.0.0 |
| IPostScenarioDataSource | This class represents a data source that can be used for a post processing scenario |
| IPostScenarioVisualizationCustomization | Visualization specific customization data |
| ISensorSet | Represents a NXOpen::CAE::ISensorSet No creator for this interface object Created in NX1847.0.0 |
| Iteration | Represents iteration present in a NXOpen::CAE::Loadcase |
| LabelRangeSelectionRecipe | Represents a Selection Recipe based on label ranges |
| Laminate | Represents a Laminate, which is a specialized kind of NXOpen::CAE::PhysicalPropertyTable |
| LaminateDampingFactorBuilder | The builder for the damping factor |
| LaminateDrapingData | Encapsulate the ply information related to the draping algorithm To create or edit an instance of this class, use NXOpen::CAE::LaminateDrapingDataBuilder Created in NX6.0.0 |
| LaminateDrapingDataBuilder | Represents a NXOpen::CAE::LaminateDrapingData builder To create a new instance of this class, use NXOpen::CAE::LaminatePly::CreateDrapingDataBuilder Created in NX6.0.0 |
| LaminateDrapingExtension | Encapsulate the ply information related to a ply draping extension To create or edit an instance of this class, use NXOpen::CAE::LaminateDrapingExtensionBuilder Created in NX8.5.0 |
| LaminateDrapingExtensionBuilder | Builder class for NXOpen::CAE::LaminateDrapingExtension To create a new instance of this class, use NXOpen::CAE::LaminatePly::CreateDrapingExtensionBuilder Created in NX8.5.0 |
| LaminateDrapingOrientation | Encapsulates the ply draping results Don't support KF |
| LaminateDynamicEvent | The Laminate Dynamic Event |
| LaminateDynamicEventBuilder | Represents a NXOpen::CAE::LaminateDynamicEvent builder This is an abstract class |
| LaminateDynamicEventCollection | Represents a collection of laminate dynamic events To obtain an instance of this class, refer to NXOpen::CAE::LaminateDynamicSim Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateDynamicSim | The Laminate Dynamic Simulation builder is the journalling interface to build the LaminateDyanmicSim object |
| LaminateDynamicSimBuilder | Represents a NXOpen::CAE::LaminateDynamicSim builder To create a new instance of this class, use NXOpen::CAE::LaminateDynamicSimCollection::CreateDynamicSimBuilder Created in NX9.0.0 |
| LaminateDynamicSimCollection | Represents a collection of laminate dynamic sims To obtain an instance of this class, refer to NXOpen::CAE::LaminateManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateElementFilterBuilder | Represents a NXOpen::CAE::LaminateGraphicalReport builder There is no kf creator |
| LaminateExtrudeSetup | Extrude Setup To create or edit an instance of this class, use NXOpen::CAE::LaminateExtrudeSetupBuilder Created in NX6.0.4 |
| LaminateExtrudeSetupBuilder | Represents a NXOpen::CAE::LaminateExtrudeSetup builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateLaminateExtrudeSetupBuilder Default values |
| LaminateExtrudeSetupCollection | Represents a collection of laminate extrusion setups To obtain an instance of this class, refer to NXOpen::CAE::LaminateGlobalLayupMgr Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateFiberOrientationOptions | Laminate Fiber Orientation Options To create or edit an instance of this class, use NXOpen::CAE::LaminateFiberOrientationOptionsBuilder Created in NX7.5.0 |
| LaminateFiberOrientationOptionsBuilder | Represents a NXOpen::CAE::LaminateFiberOrientationOptions builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayup::CreateFiberOrientationOptionsBuilder Created in NX7.5.0 |
| LaminateFillSetupBuilder | Represents a NXOpen::CAE::LaminateFillSetupBuilder builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateLaminateFillSetupBuilder Created in NX7.5.2 |
| LaminateGlobalLayup | Represent a global layup in the ply based modeling |
| LaminateGlobalLayupCollection | Represents a global layup, which is defined by a sequence of NXOpen::CAE::LaminateGlobalLayup , each with a name and a list of plies |
| iterator | Iterator for accessing the contents of the collection |
| LaminateGlobalLayupMgr | Represent the laminate global layup manager which manages all the global layups in the laminate ply-based modeling project To obtain an instance of this class, refer to NXOpen::CAE::FEModel Created in NX6.0.0 |
| LaminateGlobalLayupPlyGroupCollection | Represents a laminate layup in the global layup context (ply based modeling), which is defined by a sequence of NXOpen::CAE::LaminatePlyGroup , each with a name and a list of plies |
| iterator | Iterator for accessing the contents of the collection |
| LaminateGraphicalReport | Represents a laminate graphical report There is no kf creator |
| LaminateGraphicalReportBuilder | Represents a CAE::LaminateGraphicalReport builder There is no kf creator |
| LaminateGraphicalReportCollection | Represents a collection of CAE::LaminateGraphicalReport To obtain an instance of this class, refer to NXOpen::CAE::LaminatePostReport Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateIDrapingOrientation | Encapsulates the ply draping results Don't support KF |
| LaminateImportedLayupBuilder | Represents a NXOpen::CAE::LaminateImportedLayupBuilder builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateLaminateImportedLayupBuilder Default values |
| LaminateImportZonesBuilder | Represents a NXOpen::CAE::LaminateImportZonesBuilder builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateLaminateImportZonesBuilder Created in NX10.0.0 |
| LaminateLayupOffset | Laminate layup offset |
| LaminateLayupOffsetBuilder | Represents a NXOpen::CAE::LaminateLayupOffset builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateLayupOffsetBuilder Created in NX7.5.0 |
| LaminateLayupOffsetCollection | Represents a collection of layup offset rules To obtain an instance of this class, refer to NXOpen::CAE::LaminateGlobalLayupMgr Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateLockAngleBuilder | Represents a builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayup::CreateLockAngleBuilder Created in NX7.5.0 |
| LaminateManager | Represents the laminate manager that contains all laminate post report setups To obtain an instance of this class, refer to NXOpen::CAE::SimSimulation Created in NX8.0.0 |
| LaminateMatOrientation | Laminate Material Orientation To create or edit an instance of this class, use NXOpen::CAE::LaminateMatOrientationBuilder Created in NX7.5.0 |
| LaminateMatOrientationBuilder | Represents a NXOpen::CAE::LaminateMatOrientation builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateLaminateMatOrientationBuilder Created in NX7.5.0 |
| LaminateMatOrientationCollection | Represents a collection of layup growth rules To obtain an instance of this class, refer to NXOpen::CAE::LaminateGlobalLayupMgr Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateModeProperty | Represents the properties of one normal mode Created in NX9.0.0 |
| LaminateModePropertyCollection | Represents a collection of laminate mode properties To obtain an instance of this class, refer to NXOpen::CAE::LaminateDynamicSim Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminatePly | Represents one ply in a laminate layup |
| LaminatePlyCollection | Represents a list of plies, which have a material, a thickness, an orientation, and a color |
| iterator | Iterator for accessing the contents of the collection |
| LaminatePlyFilterBuilder | Represents a NXOpen::CAE::LaminatePlyFilterBuilder There is no kf creator |
| LaminatePlyGroup | Represents one ply group in a laminate layup |
| LaminatePlyGroupCollection | Represents a laminate layup, which is defined by a sequence of CAE::LaminatePlyGroup , each with a name and a list of plies |
| iterator | Iterator for accessing the contents of the collection |
| LaminatePlyMaxThicknessVarBuilder | Builder used to modify the ply maximum accepted thickness variation for laminate fill To create a new instance of this class, use NXOpen::CAE::LaminatePly::CreateLaminatePlyMaxThicknessVarBuilder Created in NX8.5.0 |
| LaminatePlySection | The Laminate Ply Section |
| LaminatePlySectionBuilder | Represents a NXOpen::CAE::LaminatePlySection builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreatePlySectionBuilder Created in NX1847.0.0 |
| LaminatePlySectionCollection | Represents a collection of Laminate Ply Section |
| iterator | Iterator for accessing the contents of the collection |
| LaminatePostReport | Represents an advanced post reporting setup for laminate results |
| LaminatePostReportBuilder | Represents a NXOpen::CAE::LaminatePostReport builder There is no kf creator |
| LaminatePostReportCollection | Represents a collection of laminate post reports To obtain an instance of this class, refer to NXOpen::CAE::LaminateManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateQuickReport | Represents a laminate quick report There is no kf creator |
| LaminateQuickReportBuilder | Represents a NXOpen::CAE::LaminateQuickReport builder There is no kf creator |
| LaminateQuickReportCollection | Represents a collection of CAE::LaminateQuickReport To obtain an instance of this class, refer to NXOpen::CAE::LaminatePostReport Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateRandomEvent | The Laminate Dynamic Event |
| LaminateRandomEventBuilder | Represents a NXOpen::CAE::LaminateRandomEvent builder To create a new instance of this class, use NXOpen::CAE::LaminateDynamicEventCollection::CreateRandomEventBuilder Created in NX9.0.0 |
| LaminateRelabelPliesBuilder | Represents a CAE::LaminateDynamicEvent builder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateRelabelPliesBuilder Created in NX10.0.0 |
| LaminateReportObject | Laminate report object |
| LaminateReportObjectBuilder | Represents a Report Object Builder |
| LaminateReportObjectCollection | Represents a collection of laminate report objects To obtain an instance of this class, refer to NXOpen::CAE::LaminateManager Created in NX1847.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateSelectEntitiesBuilder | Represents a NXOpen::CAE::LaminateSelectEntitiesBuilder To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateLaminateSelectEntitiesBuilder Created in NX7.5.2 |
| LaminateSineEvent | The Laminate Sine Event |
| LaminateSineEventBuilder | Represents a NXOpen::CAE::LaminateSineEvent builder To create a new instance of this class, use NXOpen::CAE::LaminateDynamicEventCollection::CreateSineEventBuilder Created in NX10.0.0 |
| LaminateSpreadsheetReport | Represents a laminate spreadsheet report There is no kf creator |
| LaminateSpreadsheetReportBuilder | Represents a NXOpen::CAE::LaminateSpreadsheetReport builder There is no kf creator |
| LaminateSpreadsheetReportCollection | Represents a collection of NXOpen::CAE::LaminateSpreadsheetReport To obtain an instance of this class, refer to NXOpen::CAE::LaminatePostReport Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LaminateViewDrapingResultsBuilder | Represents the builder for the draping results viewer To create a new instance of this class, use NXOpen::CAE::LaminateGlobalLayupMgr::CreateViewDrapingResultsBuilder Created in NX6.0.0 |
| LayoutState | This is the class representing a layout state |
| LayoutStateApplicator | Represents a NXOpen::CAE::LayoutStateApplicator which can be used to visualize a layout state |
| LayoutStateBuilder | Represents a NXOpen::CAE::LayoutStateBuilder which can be used to create layout states |
| LayoutStateCollection | This class is a collection of NXOpen::CAE::LayoutState |
| iterator | Iterator for accessing the contents of the collection |
| LayoutStateDataReference | This class represents a data reference of a layout state |
| LayoutStateDataReferenceCollection | This class is a collection of NXOpen::CAE::LayoutStateDataReference |
| iterator | Iterator for accessing the contents of the collection |
| LbcAssociationMgr | Represents an abstract NXOpen::CAE::LbcAssociationMgr This is an abstract class Created in NX10.0.0 |
| Loadcase | Represents loadcases present in a NXOpen::CAE::Result |
| LocalRemeshBuilder | Represents a NXOpen::CAE::LocalRemeshBuilder To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateLocalRemeshBuilder Default values |
| LumpedMassEADBuilder | This class provides LumpedMass Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateLumpedMassEadBuilder Default values |
| ManualMorphBuilder | Represents a NXOpen::CAE::ManualMorphBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateManualMorphBuilder Created in NX9.0.0 |
| ManualNodeAssociationBuilder | Represents a NXOpen::CAE::ManualNodeAssociationBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateManualNodeAssociationBuilder Created in NX10.0.0 |
| ManualSweepBetweenListItemSelection | Represents a NXOpen::CAE::ManualSweepBetweenListItemSelection To create a new instance of this class, use NXOpen::CAE::ManualSweepBetweenSelection::CreateNewListItem Created in NX7.5.2 |
| ManualSweepBetweenListItemSelectionList | Represents a list of objects |
| ManualSweepBetweenSelection | Builder for creating Manual Hex Mesh - Face Dependency type |
| MappedHole | Represents a CAE mapped hole |
| MappedMesh | Represents Mesh Recipe To create or edit an instance of this class, use NXOpen::CAE::MappedMeshBuilder Created in NX5.0.0 |
| MappedMeshBuilder | Represents a Mapped Mesh Builder |
| MappedResult | Represents analysis results for a imported solver results file |
| MaterialOptions | Represents the material options to be used when assigning a material to cae part |
| MechanicalLoadSumBuilder | Represents a NXOpen::CAE::MechanicalLoadSumBuilder To create a new instance of this class, use NXOpen::CAE::ModelCheckManager::CreateMechanicalLoadSumBuilder Created in NX5.0.1 |
| MergeFaceBuilder | Builder for creating Merge Face To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateMergeFaceBuilder Default values |
| Mesh | Represents a Mesh |
| Mesh0d | Represents 0d Mesh To create or edit an instance of this class, use NXOpen::CAE::Mesh0dBuilder Created in NX6.0.0 |
| Mesh0dBuilder | Represents 0D Mesh Used to create a NXOpen::CAE::Mesh0d To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateMesh0dBuilder Created in NX6.0.0 |
| Mesh1d | Represents 1d Mesh To create or edit an instance of this class, use NXOpen::CAE::Mesh1dBuilder Created in NX6.0.0 |
| Mesh1dBuilder | Represents 1d Mesh Used to create a NXOpen::CAE::Mesh1d To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateMesh1dBuilder Created in NX6.0.0 |
| Mesh2d | Represents 2d Mesh This is an abstract class Created in NX6.0.0 |
| Mesh2dBuilder | Represents 2D Mesh Used to create a NXOpen::CAE::Mesh2d To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateMesh2dBuilder Created in NX6.0.0 |
| Mesh2dFree | Represents 2d Mesh To create or edit an instance of this class, use NXOpen::CAE::Mesh2dBuilder Created in NX6.0.0 |
| Mesh2dFromFacets | Represents 2d Mesh From Facets This is an abstract class Created in NX1847.0.0 |
| Mesh2dFromFacetsBuilder | Represents 2D Mesh From Facets Used to create a NXOpen::CAE::Mesh2dFromFacets To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateMesh2dFromFacetsBuilder Created in NX1847.0.0 |
| Mesh3d | Represents 3d Mesh To create or edit an instance of this class, use NXOpen::CAE::Mesh3dTetBuilder Created in NX6.0.0 |
| Mesh3dHexBuilder | Represents 3D Hex Mesh Used to create a NXOpen::CAE::SweptMesh To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateMesh3dHexBuilder Created in NX6.0.0 |
| Mesh3dHybridBuilder | Represents 3D Mesh Used to create a CAE::Mesh3d To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateMesh3dHybridBuilder Created in NX11.0.0 |
| Mesh3dTetBuilder | Represents 3D Mesh Used to create a CAE::Mesh3d To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateMesh3dTetBuilder Created in NX6.0.0 |
| MeshCollector | Represents a MeshCollector |
| MeshCollectorBuilder | Represents a NXOpen::CAE::MeshCollectorBuilder To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateCollectorBuilder Created in NX5.0.0 |
| MeshCollectorDisplayDefaults | Represents the base MeshCollectorDisplayDefaults class for Mesh, MeshCollector and MeshCollectorOccurrence classes |
| MeshCollectorDisplayDefaults0d | Represents 0d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0 |
| MeshCollectorDisplayDefaults1d | Represents 1d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0 |
| MeshCollectorDisplayDefaults2d | Represents 2d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0 |
| MeshCollectorDisplayDefaults3d | Represents 3d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0 |
| MeshCollectorOccurrence | Represents a MeshCollector Occurrence |
| MeshCollectorOccurrenceBuilder | Represents a NXOpen::CAE::MeshCollectorOccurrenceBuilder To create a new instance of this class, use NXOpen::CAE::MeshManagerOccurrence::CreateOccurrenceBuilder Created in NX5.0.0 |
| MeshControl | Represents a MeshControl |
| MeshControlBuilder | Represents a NXOpen::CAE::MeshControl To create a new instance of this class, use NXOpen::CAE::MeshControlCollection::CreateBuilder Default values |
| MeshControlCollection | Provides methods for managing mesh controlsNXOpen::CAE::MeshControl in a fem part |
| iterator | Iterator for accessing the contents of the collection |
| MeshControlDisplayManager | Provides method for creating builder for mesh control display operation commands in both sim and fem part |
| MeshControlDisplayOptionsBuilder | Represents a NXOpen::CAE::MeshControlDisplayOptionsBuilder To create a new instance of this class, use NXOpen::CAE::MeshControlDisplayManager::CreateBuilder Created in NX5.0.0 |
| MeshDisplaySettings | Represents the base MeshDisplaySettings class for Mesh class |
| MeshDisplaySettings0d | Represents 0d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0 |
| MeshDisplaySettings1d | Represents 1d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0 |
| MeshDisplaySettings2d | Represents 2d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0 |
| MeshDisplaySettings3d | Represents 3d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0 |
| MeshFollower | Represents Mesh Recipe This is an abstract class Created in NX7.5.0 |
| MeshFromBoundaryBuilder | Represents a NXOpen::CAE::MeshFromBoundaryBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateMeshFromBoundaryBuilder Created in NX9.0.0 |
| MeshManager | Creates MeshesNXOpen::CAE::Mesh in a fem part |
| MeshManagerOccurrence | Manages MeshOccurrencs and MeshCollectorOccurrences in a fem part |
| MeshManualSweepBetweenListItemSelection | Represents a NXOpen::CAE::MeshManualSweepBetweenListItemSelection To create a new instance of this class, use NXOpen::CAE::Mesh3dHexBuilder::CreateNewListItem Created in NX10.0.0 |
| MeshManualSweepBetweenListItemSelectionList | Represents a list of objects |
| MeshMate | Represents a Mesh Mate |
| MeshPoint | Represents a smart NXOpen::CAE::MeshPoint |
| MeshPointBaseBuilder | Represents a NXOpen::CAE::MeshPointBaseBuilder This is an abstract class and cannot be directly instantiated Created in NX5.0.2 |
| MeshPointCollection | Provides methods for managing constraints NXOpen::CAE::MeshPoint in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| MeshPointConicCenterBuilder | Represents a NXOpen::CAE::MeshPointConicCenterBuilder To create a new instance of this class, use NXOpen::CAE::MeshPointCollection::CreateMeshpointConicCenterBuilder Created in NX5.0.2 |
| MeshPointExistingPointBuilder | Represents a NXOpen::CAE::MeshPointExistingPointBuilder To create a new instance of this class, use NXOpen::CAE::MeshPointCollection::CreateMeshpointExistingPointBuilder Created in NX5.0.2 |
| MeshPointInsideVolumeBuilder | Represents a NXOpen::CAE::MeshPointInsideVolumeBuilder To create a new instance of this class, use NXOpen::CAE::MeshPointCollection::CreateMeshpointInsideVolumeBuilder Created in NX5.0.2 |
| MeshPointMultipleOnCurveBuilder | Represents a NXOpen::CAE::MeshPointMultipleOnCurveBuilder To create a new instance of this class, use NXOpen::CAE::MeshPointCollection::CreateMeshpointMultipleOnCurveBuilder Created in NX5.0.2 |
| MeshPointOnCurveBuilder | Represents a NXOpen::CAE::MeshPointOnCurveBuilder To create a new instance of this class, use NXOpen::CAE::MeshPointCollection::CreateMeshpointOnCurveBuilder Created in NX5.0.2 |
| MeshPointOnFaceBuilder | Represents a NXOpen::CAE::MeshPointOnFaceBuilder To create a new instance of this class, use NXOpen::CAE::MeshPointCollection::CreateMeshpointOnFaceBuilder Created in NX5.0.2 |
| MeshPointProjectBuilder | Represents a NXOpen::CAE::MeshPointProjectBuilder To create a new instance of this class, use NXOpen::CAE::MeshPointCollection::CreateMeshpointProjectBuilder Created in NX5.0.2 |
| MeshRefinementBuilder | Represents Mesh Refinement Used to create a NXOpen::CAE::MeshRefinementBuilder To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateMeshRefinementBuilder Created in NX11.0.0 |
| MeshShellFromSolid | Represents 2d Mesh that follows 3d mesh To create or edit an instance of this class, use NXOpen::CAE::SurfaceCoatBuilder Created in NX7.5.0 |
| MMCCreateBuilder | Represents a NXOpen::CAE::MMCCreateBuilder which can be used to create or edit NXOpen::CAE::MeshMate objects |
| ModelAndLoadPreProcess | Represents a NXOpen::CAE::ModelAndLoadPreProcess |
| ModelAndLoadPreProcessBuilder | Builds a NXOpen::CAE::ModelAndLoadPreProcess object which represets a data processing meta solution |
| ModelAndLoadPreProcessFanNoiseSegmentation | Represents a NXOpen::CAE::ModelAndLoadPreProcessFanNoiseSegmentation |
| ModelAndLoadPreProcessFanNoiseSegmentationBuilder | Builds a NXOpen::CAE::ModelAndLoadPreProcessFanNoiseSegmentation object which represets an operation |
| ModelAndLoadPreProcessFrequencyOptions | Represents a NXOpen::CAE::ModelAndLoadPreProcessFrequencyOptions |
| ModelAndLoadPreProcessInputFile | Represents a NXOpen::CAE::ModelAndLoadPreProcessInputFile |
| ModelAndLoadPreProcessInputFileBuilder | Builds a NXOpen::CAE::ModelAndLoadPreProcessInputFile object which represets an operation |
| ModelAndLoadPreProcessMeshMapping | Represents a NXOpen::CAE::ModelAndLoadPreProcessMeshMapping |
| ModelAndLoadPreProcessMeshMappingBuilder | Builds a NXOpen::CAE::ModelAndLoadPreProcessMeshMapping object which represets an operation |
| ModelAndLoadPreProcessMeshMappingData | Represents a NXOpen::CAE::ModelAndLoadPreProcessMeshMappingData |
| ModelAndLoadPreProcessMeshMappingDataBuilder | Represents a CAE::ModelAndLoadPreProcessMeshMappingData builder To create a new instance of this class, use NXOpen::CAE::ModelAndLoadPreProcessMeshMappingDatas::CreateBuilder Created in NX1847.0.0 |
| ModelAndLoadPreProcessMeshMappingDatas | Represents a collection of MLPP mesh mapping datas |
| iterator | Iterator for accessing the contents of the collection |
| ModelAndLoadPreProcessOperation | Represents a NXOpen::CAE::ModelAndLoadPreProcessOperation |
| ModelAndLoadPreProcessOperationBuilder | Builds a NXOpen::CAE::ModelAndLoadPreProcessOperation object which represets an operation |
| ModelAndLoadPreProcessOperations | Represents a collection of MLPP events |
| iterator | Iterator for accessing the contents of the collection |
| ModelAndLoadPreProcessor | Represents a collection of Data Processing meta solution |
| iterator | Iterator for accessing the contents of the collection |
| ModelAndLoadPreProcessPressureToForce | Represents a NXOpen::CAE::ModelAndLoadPreProcessPressureToForce |
| ModelAndLoadPreProcessPressureToForceBuilder | Builds a NXOpen::CAE::ModelAndLoadPreProcessPressureToForce object which represets an operation |
| ModelAndLoadPreProcessTbl | Represents a NXOpen::CAE::ModelAndLoadPreProcessTbl |
| ModelAndLoadPreProcessTblBuilder | Builds a NXOpen::CAE::ModelAndLoadPreProcessTbl object which represets an operation |
| ModelAndLoadPreProcessTimeSignal | Represents a NXOpen::CAE::ModelAndLoadPreProcessTimeSignal |
| ModelAndLoadPreProcessTimeSignalBuilder | Represents a NXOpen::CAE::ModelAndLoadPreProcessTimeSignal builder There is no kf creator for this |
| ModelAndLoadPreProcessTimeToWaterfall | Represents a NXOpen::CAE::ModelAndLoadPreProcessTimeToWaterfall |
| ModelAndLoadPreProcessTimeToWaterfallBuilder | Builds a NXOpen::CAE::ModelAndLoadPreProcessTimeToWaterfall object which represets an operation |
| ModelCheckManager | Provides method for creating builder for node element operation commands in a fem part |
| ModelDisplayBuilder | This class provides Model Display Data Support To create a new instance of this class, use NXOpen::CAE::CaePart::CreateModelDisplayBuilder Default values |
| ConnectionDisplayParameters | Display parameters of a connection Created in NX1847.0.0 |
| ModelingObjectPropertyTable | Represents a Modeling Object Property Table |
| ModelingObjectPropertyTableCollection | Creates Modeling Object property tablesNXOpen::CAE::ModelingObjectPropertyTable in a fem model |
| iterator | Iterator for accessing the contents of the collection |
| ModelUpdateCorrelMethodBuilder | Represents a NXOpen::CAE::ModelUpdateCorrelMethodBuilder To create a new instance of this class, use NXOpen::CAE::ModelUpdateSolution::CreateCorrelMethodBuilder Created in NX7.5.0 |
| ModelUpdateDesignVariable | Represents a NXOpen::CAE::ModelUpdateDesignVariable , which is a meta-solution used to update finite element models to match real life test data Created in NX8.0.1 |
| ModelUpdateDesignVariablesCollection | Represents a collection of durability events |
| iterator | Iterator for accessing the contents of the collection |
| ModelUpdateDesignVariablesRapidCreateBuilder | This class is the builder that is used for the rapid creation of design variables |
| ModelUpdateOptimOptionsBuilder | Represents a NXOpen::CAE::ModelUpdateOptimOptionsBuilder To create a new instance of this class, use NXOpen::CAE::ModelUpdateSolution::CreateOptimOptionsBuilder Created in NX7.5.0 |
| ModelUpdateOptionsBuilder | Represents a NXOpen::CAE::ModelUpdateOptionsBuilder To create a new instance of this class, use NXOpen::CAE::ModelUpdateSolution::CreateOptionsBuilder Created in NX7.5.0 |
| ModelUpdateOverallWeightsBuilder | Represents a NXOpen::CAE::ModelUpdateOverallWeightsBuilder To create a new instance of this class, use NXOpen::CAE::ModelUpdateSolution::CreateOverallWeightsBuilder Created in NX7.5.0 |
| ModelUpdateSensitivityViewerBuilder | Represents NXOpen::CAE::ModelUpdateSensitivityViewerBuilder To create a new instance of this class, use NXOpen::CAE::ModelUpdateSolutionCollection::CreateSensitivityViewerBuilder Created in NX6.0.0 |
| ModelUpdateSolution | Represents a NXOpen::CAE::ModelUpdateSolution , which is a meta-solution used to update finite element models to match real life test data To create or edit an instance of this class, use NXOpen::CAE::ModelUpdateSolutionBuilder Created in NX7.5.0 |
| ModelUpdateSolutionBuilder | Represents a NXOpen::CAE::ModelUpdateSolutionBuilder To create a new instance of this class, use NXOpen::CAE::ModelUpdateSolutionCollection::CreateSolutionBuilder Created in NX7.5.0 |
| ModelUpdateSolutionCollection | Represents a collection of model update meta solution To obtain an instance of this class, refer to NXOpen::CAE::CorrelManager |
| iterator | Iterator for accessing the contents of the collection |
| ModeSet | This is the class representing a Mode set |
| ModeSetBuilder | Represents a NXOpen::CAE::ModeSetBuilder which can be used to create ModeSets |
| ModeSetCollection | This class is a collection of NXOpen::CAE::ModeSet |
| iterator | Iterator for accessing the contents of the collection |
| ModifiableFEModelOccAttribute | This class represents an Interface to the Finite Element Model |
| MorphRevolvedMeshBuilder | Represents a NXOpen::CAE::MorphRevolvedMeshBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateMorphRevolvedMeshBuilder Created in NX11.0.0 |
| MoveNodeBuilder | Represents a NXOpen::CAE::MoveNodeBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateMoveNodeBuilder Created in NX12.0.0 |
| MultipleElementCreateBuilder | Represents a NXOpen::CAE::MultipleElementCreateBuilder which can be used to create mutiple elements in one efficient opertation |
| MultipleNodeCreateBuilder | Represents a NXOpen::CAE::MultipleNodeCreateBuilder which can be used to create multiple nodes in one efficient operation |
| NamedPropertyTable | Represents a NXOpen::CAE::NamedPropertyTable which is a superclass to NXOpen::CAE::PhysicalPropertyTable |
| NamedPropTableWithTargetSet | Represents a Solver Specific Modeling Object with associated target set(s) |
| NodalForceReport | Free Body Object |
| NodalForceReportBuilder | Nodal Force Report Builder An instance of this class can not be obtained Created in NX12.0.0 |
| NodeAlignBuilder | Represents a NXOpen::CAE::NodeAlignBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeAlignBuilder Created in NX5.0.0 |
| NodeAssociationBuilder | Represents a NXOpen::CAE::NodeAssociationBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeAssociationBuilder Created in NX9.0.0 |
| NodeCreateBuilder | Represents a NXOpen::CAE::NodeCreateBuilder |
| NodeDeleteBuilder | Represents a NXOpen::CAE::NodeDeleteBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeDeleteBuilder Created in NX5.0.0 |
| NodeDissociationBuilder | Represents a NXOpen::CAE::NodeDissociationBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeDissociationBuilder Created in NX9.0.0 |
| NodeElementInfoBuilder | Represents a NXOpen::CAE::NodeElementInfoBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementInfoManager::CreateNodeElementInfoBuilder Created in NX5.0.0 |
| NodeElementInfoManager | Provides method for creating builder for node element info operation commands in both sim and fem part |
| NodeElementManager | Provides method for creating builder for node element operation commands in a fem part |
| NodeLabelMethod | Represents the output from the node label smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| NodeModifyLabelBuilder | Represents a NXOpen::CAE::NodeModifyLabelBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeModifyLabelBuilder Created in NX5.0.0 |
| NodeModifyLocationBuilder | Represents a NXOpen::CAE::NodeModifyLocationBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeModifyLocationBuilder Created in NX5.0.0 |
| NodeProjectBuilder | Represents a NXOpen::CAE::NodeProjectBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeProjectBuilder Created in NX8.5.0 |
| NodeReflectBuilder | Represents a NXOpen::CAE::NodeReflectBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeReflectBuilder Created in NX5.0.0 |
| NodeRotateBuilder | Represents a NXOpen::CAE::NodeRotateBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeRotateBuilder Created in NX5.0.0 |
| NodesBetweenNodesBuilder | Represents a NXOpen::CAE::NodesBetweenNodesBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodesBetweenNodesBuilder Created in NX5.0.0 |
| NodesOnCurveBuilder | Represents a NXOpen::CAE::NodesOnCurveBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodesOnCurveBuilder Created in NX5.0.0 |
| NodesRepositionBuilder | Represents a NXOpen::CAE::NodesRepositionBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodesRepositionBuilder Created in NX6.0.2 |
| NodeTranslateBuilder | Represents a NXOpen::CAE::NodeTranslateBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateNodeTranslateBuilder Created in NX5.0.0 |
| NoteCollection | Represents a collection of CAE notes To obtain an instance of this class, refer to NXOpen::CAE::CaePart Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| NoteFolder | Represents an object that manages annotation for CAE To obtain an instance of this object use on of the creator in NXOpen::CAE::NoteManager |
| NoteManager | Represents an object that manages annotation for CAE To obtain an instance of this class, refer to NXOpen::CAE::CaePart Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| NotePreferencesBuilder | Represents a NXOpen::CAE::NotePreferencesBuilder To create a new instance of this class, use NXOpen::CAE::NoteManager::CreateNotePreferencesBuilder Created in NX1847.0.0 |
| NumberFormat | Represents the settings of format number value Created in NX11.0.2 |
| NxBcPlotContours | Represents a NXOpen::CAE::NxBcPlotContours object returned from NXOpen::CAE::SimBcPlotContoursBuilder::CreatePlotObject in NXOpen::CAE::SimBcPlotContoursBuilder |
| OneDimensionalElementSplitBuilder | Represents a NXOpen::CAE::OneDimensionalElementSplitBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateOneDimensionalElementSplitBuilder Created in NX8.5.0 |
| OpenDuctMeshBuilder | Represents a NXOpen::CAE::OpenDuctMeshBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateOpenDuctMeshBuilder Created in NX12.0.0 |
| OrderedEdgeElemMethod | Represents the output from the ordered edge element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| OrderedEdgeNodeMethod | Represents the output from the ordered edge node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| OrderedFeatureEdgeElemMethod | Represents the output from the ordered feature edge element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| OrderedFeatureEdgeNodeMethod | Represents the output from the ordered feature edge node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| OrderedSelection | Represents list of ordered selection entitites Created in NX11.0.0 |
| Override | This class represents an override |
| OverrideCollection | Provides methods for managing NXOpen::CAE::Override |
| iterator | Iterator for accessing the contents of the collection |
| PhysicalPropertyTable | Represents a Physical Property Table |
| PhysicalPropertyTableCollection | Creates physical property tablesNXOpen::CAE::PhysicalPropertyTable in a fem model |
| iterator | Iterator for accessing the contents of the collection |
| PointSelectionRecipe | Represents a single node selection recipe based on coordinates of a point |
| PolygonFaceOnMeshBuilder | Builder for creating Polygon Face On Mesh To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreatePolygonFaceOnMeshBuilder Default values |
| PolygonGeometryManager | Provides methods for managing set NXOpen::CAE::PolygonGeometryManager |
| Post | Represents Post-Processing To obtain an instance of this class, refer to NXOpen::Session Created in NX5.0.0 |
| Animation | Animation settings |
| AnimationParameters | Animation settings |
| AnimationStreamline | Animation settings for streamline animation |
| AnnotationBox | Annotation box display settings |
| ASCIIDiffTolerances | Tolerances used for comparing postview ASCII display files |
| Axisymmetric | 3D Axi-symmetric model display settings |
| Clipping | Cutting-plane display settings |
| Colorbar | Colorbar settings |
| EdgeFace | Edge and Face display settings |
| GraphIds | Graph handle |
| GraphParameters | Graph extraction parameters |
| Headerlines | Headerlines |
| Mark | Mark display settings |
| PrimaryEdgeFace | Edge and Face Fill display settings |
| Streamline | Streamline display settings |
| StreamlineData | Streamline data extraction parameters |
| StreamlineExtraction | Streamline extraction parameters |
| StreamlineSeed | Streamline seed point definition |
| Text | Annotation text settings |
| Post3DGraphBuilder | Represents a NXOpen::CAE::Post3DGraphBuilder This is an abstract class and cannot be instantiated Created in NX10.0.0 |
| PostAnnotation | Controls appearance of a annoation object in a postview |
| PostAnnotationBuilder | Builder to create NXOpen::CAE::PostAnnotation from NXOpen::CAE::Post |
| PostAnnotationPreference | Represents Post-Annotation Preferences To obtain an instance of this class use CAE::CaePost::Preference Created in NX10.0.0 |
| PostColorbar | This class has the information related to post legend colorbar |
| PostColorbarColorParameters | This class has the information related to post colorbar color control values |
| PostColorbarUnderFlowOverFlowParameters | This class has the information related to post colorbar underflow overflow values |
| PostColorbarValueParameters | This class has the information related to post colorbar value control |
| PostCoordinateSystem | This class is worked as a packet of information that can be used to set the Coordinate System Parameters of a NXOpen::CAE::Post object |
| PostCustomHeaderLines | This class has the information related to post legend custom header lines |
| HeaderToken | Container for token and usertext for legend header customization |
| PostEnvironmentsManager | Represents a NXOpen::CAE::PostEnvironmentsManager provides Post Environment Support Not support KF |
| PostGeneralPreference | Represents General Post Preferences To obtain an instance of this class use CAE::CaePost::Preference Created in NX1847.0.0 |
| PostGraph | This class provides interfaces to query graph attributes An instance of this class can not be obtained Created in NX9.0.0 |
| PostGraphAcrossIterationsBuilder | Represents a NXOpen::CAE::PostGraphAcrossIterationsBuilder This is an abstract class and cannot be instantiated Created in NX9.0.0 |
| PostGraphAlongPathBuilder | Represents a NXOpen::CAE::PostGraphAlongPathBuilder This is an abstract class and cannot be instantiated Default values |
| PostGraphBuilder | Represents a NXOpen::CAE::PostGraphBuilder This is an abstract class and cannot be instantiated Created in NX9.0.0 |
| PostGraphOrbitBuilder | Represents a NXOpen::CAE::PostGraphOrbitBuilder This is an abstract class and cannot be instantiated Created in NX9.0.0 |
| PostGraphPreference | Represents Post-Graph Preferences To obtain an instance of this class use CAE::CaePost::Preference Created in NX10.0.0 |
| PostHeader | This class has the information related to post legend header |
| PostIdentifyPreference | Represents Post-Identify Preferences To obtain an instance of this class use CAE::CaePost::Preference Created in NX10.0.0 |
| PostJtExportBuilder | Represents a NXOpen::CAE::PostJtExportBuilder used for exporting JTs of Result Types in Post Processing To create a new instance of this class, use NXOpen::CAE::ResultManager::CreatePostJtBuilder Created in NX8.5.0 |
| PostLegend | This class has the information related to post legend |
| PostLegendPreference | Represents Post-Legend Preferences To obtain an instance of this class use CAE::CaePost::Preference Created in NX10.0.0 |
| PostMesh | This class has the information related to post mesh group |
| PostPreference | Represents Post Preferences To obtain an instance of this class use CAE::Post Created in NX10.0.0 |
| PostProcessingSession | This is the class representing a NXOpen::CAE::PostProcessingSession |
| PostProcessingSessionApplicator | Represents a NXOpen::CAE::PostProcessingSessionApplicator which can be used to visualize a post processing pession |
| PostResultNavigatorPreference | Represents Post-ResultNavigator Preferences To obtain an instance of this class use CAE::CaePost::Preference Created in NX10.0.0 |
| PostResultPreference | Represents Post-Result Preferences To obtain an instance of this class use CAE::CaePost::Preference Created in NX11.0.0 |
| PostScenario | This class represents a NXOpen::CAE::PostScenario |
| PostScenarioAction | Represents an action that can be invoked on the parent scenario |
| PostScenarioAvailableDescriptorCollection | A collection of NXOpen::CAE::PostScenarioDescriptor s |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioBuilder | This class represents a NXOpen::CAE::PostScenarioBuilder |
| PostScenarioBuilderDataDefinitionCollection | This is a collection of NXOpen::CAE::PostScenarioDataDefinition available to a NXOpen::CAE::PostScenarioBuilder for a selected Data Source To obtain an instance of this class, refer to NXOpen::CAE::PostScenarioBuilder Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioBuilderSlot | This class represents a NXOpen::CAE::PostScenarioBuilderSlot |
| PostScenarioBuilderSlotCollection | This class is a collection of NXOpen::CAE::PostScenarioBuilderSlot |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioColorBarsCustomization | TODO: Add documentation |
| PostScenarioConfigurationVariable | A configuration variable to which values can be bound in order to define a user selection (NXOpen::CAE::PostScenarioSelectionParameters ) for a post scenario (NXOpen::CAE::PostScenarioBuilder ) |
| PostScenarioConfigurationVariableCollection | This class is a collection of NXOpen::CAE::PostScenarioConfigurationVariable |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioCoordinateSystem | Represents a local coordinate system |
| PostScenarioDataDefinition | Represents a data source data definition |
| PostScenarioDefinition | Represents a data source data definition |
| PostScenarioDescriptor | This class represents a NXOpen::CAE::PostScenarioDescriptor |
| PostScenarioDescriptorCollection | This class is a collection of NXOpen::CAE::PostScenarioDescriptor |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioInputDefinition | Represents an Input Definition, part of a NXOpen::CAE::PostScenarioDescriptor |
| PostScenarioInputDefinitionCollection | This class is a collection of NXOpen::CAE::PostScenarioInputDefinition |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioManager | Manages the creation of a NXOpen::CAE::PostScenarioBuilder |
| PostScenarioMeshDefinition | A mesh definition, in the context of a NXOpen::CAE::PostScenarioDescriptor , requires a mesh for the scenario |
| PostScenarioMeshDefinitionCollection | Represents a collection of Mesh Definitions available in a certain Scenario Definition's Input Definition |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioModeDescription | Mode description |
| PostScenarioParameters | The class represents the NXOpen::CAE::PostScenarioParameters used to instanciate a NXOpen::CAE::PostScenarioBuilder |
| PostScenarioSelectionParameters | The class handles the User Selection for a Scenario |
| PostScenarioVariable | A selection variable to which values can be bound in order to define a user selection for a post scenario |
| PostScenarioVariableCollection | This class is a collection of NXOpen::CAE::PostScenarioVariable |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioVariant | A dynamically typed scalar value |
| PostScenarioVisualizationCollection | Represents a collection of Visualizations available in a certain Scenario Definition's Input Definition |
| iterator | Iterator for accessing the contents of the collection |
| PostScenarioVisualizationCustomizationCollection | Collection holding visualization customization data |
| PostScenarioVisualizationDefinition | A visualization, in the context of a NXOpen::CAE::PostScenarioDescriptor , dictates how data will be visualized on-screen |
| PostSelectionEntity | This class has the information related to post selection entity |
| PostShowhideBuilder | Represents NXOpen::CAE::PostShowhideBuilder |
| PreTestDofSet | Represents Dof Set within a pre-test setup To create or edit an instance of this class, use NXOpen::CAE::PreTestDofSetBuilder Created in NX7.5.0 |
| PreTestDofSetBuilder | Represents a NXOpen::CAE::PreTestDofSet builder To create a new instance of this class, use NXOpen::CAE::PreTestSolutionCollection::CreatePretestDofsetBuilder Created in NX7.5.0 |
| PreTestExciterConfig | Represent a exciter selection configuration To create or edit an instance of this class, use NXOpen::CAE::PreTestExciterConfigBuilder Created in NX8.0.0 |
| PreTestExciterConfigBuilder | Represents a NXOpen::CAE::PreTestExciterConfig builder To create a new instance of this class, use NXOpen::CAE::PreTestSolutionCollection::CreateExciterConfigBuilder Default values |
| PreTestExciterConfigCollection | Represents a collection of exciter selection configuration To obtain an instance of this class, refer to NXOpen::CAE::PreTestExciterSelectionControl Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PreTestExciterSelectionControl | Represents a pre-test exciter selection setup To obtain an instance of this class, refer to NXOpen::CAE::PreTestSolution Created in NX8.0.0 |
| PreTestExciterSelectionDofSetCollection | Represents a collection of exciter selection configuration |
| iterator | Iterator for accessing the contents of the collection |
| PreTestExportUnvBuilder | This is a manager to the NXOpen::CAE::PreTestExportUnvBuilder class |
| PreTestSensorConfig | Represent a sensor selection configuration To create or edit an instance of this class, use NXOpen::CAE::PreTestSensorConfigBuilder Created in NX7.5.0 |
| PreTestSensorConfigBuilder | Represents a NXOpen::CAE::PreTestSensorConfig builder To create a new instance of this class, use NXOpen::CAE::PreTestSolutionCollection::CreateSensorConfigBuilder Default values |
| PreTestSensorConfigCollection | Represents a collection of sensor selection configuration To obtain an instance of this class, refer to NXOpen::CAE::PreTestSensorSelectionControl Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| PreTestSensorSelectionControl | Represents a pre-test sensor selection setup To obtain an instance of this class, refer to NXOpen::CAE::PreTestSolution Created in NX7.5.0 |
| PreTestSensorSelectionDofSetCollection | Represents a collection of sensor selection configuration |
| iterator | Iterator for accessing the contents of the collection |
| PreTestSolution | Represents a pre-test setup To create or edit an instance of this class, use NXOpen::CAE::PreTestSolutionBuilder Created in NX7.5.0 |
| PreTestSolutionBuilder | Represents a NXOpen::CAE::PreTestSolution builder To create a new instance of this class, use NXOpen::CAE::PreTestSolutionCollection::CreatePretestBuilder Created in NX7.5.0 |
| PreTestSolutionCollection | Represents a collection of pre-test setups To obtain an instance of this class, refer to NXOpen::CAE::CorrelManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| PrimitiveMesh | Represents Primitive Mesh To create or edit an instance of this class, use NXOpen::CAE::PrimitiveMeshBuilder Created in NX7.5.0 |
| PrimitiveMeshBuilder | Represents Primitive Mesh Used to create a CAE::Mesh To create a new instance of this class, use NXOpen::CAE::MeshManager::CreatePrimitiveMeshBuilder Created in NX7.5.1 |
| PrimitiveRecipeMesh | Represents a primitive recipe mesh |
| PrimitiveRecipeMeshBuilder | Represents a Primitive Recipe Mesh Used to create a CAE::Mesh To create a new instance of this class, use NXOpen::CAE::MeshManager::CreatePrimitiveRecipeMeshBuilder Created in NX11.0.0 |
| ProbeOutputRecipe | Represents a NXOpen::CAE::ProbeOutputRecipe This is an abstract class and cannot be instantiated Created in NX1847.0.0 |
| ProjectNodesToCadGeometryBuilder | Allows you to query the mesh nodes that are off the underlying Cad geometry by a given tolerance, and if requested this builder can adjust the node locations to put them back on to the underlying Cad geometry |
| PropertyTable | Represents a property table |
| QueryCurve | Represents a NXOpen::CAE::QueryCurve An instance of this class can be obtained from NXOpen::CAE::QueryCurveBuilder |
| QueryCurveBuilder | Represents a NXOpen::CAE::QueryCurveBuilder To create a new instance of this class, use NXOpen::CAE::QueryCurveManager::CreateQueryCurveBuilder Created in NX11.0.0 |
| QueryCurveManager | Provides methods for managing the query curves |
| QueryCurvePost | Represents a NXOpen::CAE::QueryCurvePost Use NXOpen::CAE::ResultManager to create an instance of this class An instance of this class can be obtained from NXOpen::CAE::ResultManager |
| Entity | Query curve post entity |
| QueryCurveUsageOptions | Represents the options to apply a query curve |
| ReassignElementsBuilder | Represents a NXOpen::CAE::ReassignElementsBuilder To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateReassignElementsBuilder Created in NX5.0.0 |
| RecipeConvexMesh | Represents a convex mesh |
| RecipeOpenDuctMesh | Represents a open duct mesh |
| RecipeSurfaceWrap | Represents 2d mesh associated to fluid domain body, all from surface wrapper |
| RelatedCurveMethod | Represents the output from the related curve smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| RelatedEdgeMethod | Represents the output from the related edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| RelatedElemEdgeMethod | Represents the output from the related element edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| RelatedElemFaceMethod | Represents the output from the related element face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| RelatedElemMethod | Represents the output from the related element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| RelatedFaceMethod | Represents the output from the related face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| RelatedNodeMethod | Represents the output from the related node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| RelatedVertexMethod | Represents the output from the related vertex smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| RemesherBuilder | Represents Remesher Used to create a NXOpen::CAE::RemesherBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateRemesherBuilder Created in NX1847.0.0 |
| RemoveRibsBuilder | Represents a NXOpen::CAE::RemoveRibsBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateRemoveRibsBuilder Default values |
| Result | This class provides interfaces to query analysis results |
| Averaging | Averaging structure to specify averaging options |
| DeformationParameters | Deformation parameter structure to specify complete result state for the deformed shape This structure has been replaced by NXOpen::CAE::DeformationParameters |
| ElementValue | Element-value structure to specify element value options |
| ResultBasicUnit | The basic units system for a result |
| ResultParameters | Result parameter structure to specify complete result state for the color display This structure has been replaced by NXOpen::CAE::ResultParameters |
| ResultSection | Result Section structure to specify a result section for beams and shells |
| Type | Result type structure to specify a result dataset |
| VelocityParameters | Velociy parameter structure to specify result state for the velocity field used in streamline extraction |
| ResultAccess | Represents a specific result state for a given NXOpen::CAE::Result |
| ResultManager | Manages results To obtain an instance of this class, refer to NXOpen::Session Created in NX6.0.2 |
| ResultMeasure | Represents a ResultMeasure class NXOpen::CAE::ResultMeasure |
| ResultMeasureCollection | Provides methods for managing ResultMeasures NXOpen::CAE::ResultMeasure |
| iterator | Iterator for accessing the contents of the collection |
| ResultMeasureModelSubset | Represents a a subset of the model upon which to calculate results This is an abstract class, and cannot be created |
| ResultMeasureModelSubsetFE | Represents a FE-based subset of the model upon which to calculate results To obtain an instance of this class use NXOpen::CAE::ResultMeasureCollection |
| ResultMeasureModelSubsetGeom | Represents a geometry-based subset of the model upon which to calculate results To obtain an instance of this class use NXOpen::CAE::ResultMeasureCollection |
| ResultMeasureResultAllOptions | Represents the combination of all result options for result measure To obtain an instance of this class use NXOpen::CAE::ResultMeasureCollection |
| ResultMeasureResultDirectionOptions | Represents the result directional options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection |
| ResultMeasureResultDirectionSectionOptions | Represents the result directional and beam/shell section options for result measure To obtain an instance of this class use NXOpen::CAE::ResultMeasureCollection |
| ResultMeasureResultOptions | Represents the basic result options for result measure To obtain an instance of this class use NXOpen::CAE::ResultMeasureCollection |
| ResultMeasureResultSectionOptions | Represents the result with beam/shell section options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection |
| ResultParameters | This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two NXOpen::CAE::ResultAccess objects |
| ResultParametersWithNodalForceReport | To obtain an instance of this class use Session::ResultManager |
| ResultParametersWithProbe | To obtain an instance of this class use Session::ResultManager |
| ResultProbe | Result Probe Object |
| ResultProbeBuilder | Result probe Builder An instance of this class can not be obtained Default values |
| ResultsCombinationBuilder | Represents a NXOpen::CAE::ResultsCombinationBuilder To obtain an instance of this class use NXOpen::Session::ResultManager |
| ResultsEnvelopeBuilder | Represents a NXOpen::CAE::ResultsEnvelopeBuilder To obtain an instance of this class use NXOpen::Session::ResultManager |
| ResultsManipulationBuilder | Represents an abstract NXOpen::CAE::ResultsManipulationBuilder This is an abstract class and cannot be instantiated Created in NX7.5.2 |
| ResultsModelExportBuilder | Represents a NXOpen::CAE::ResultsModelExportBuilder To obtain an instance of this class use NXOpen::Session::ResultManager |
| ResultsReductionBuilder | Represents a NXOpen::CAE::ResultsReductionBuilder To obtain an instance of this class use NXOpen::Session::ResultManager |
| ResultType | This class represents a result type from a result file |
| ResultVariable | Controls Result Exp Object |
| RigidEADBuilder | This class provides Rigid Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateRigidEadBuilder Created in NX6.0.0 |
| SelectCAEBody | Represents a single object selection |
| SelectCAEBodyList | Represents a list of objects on a selection list |
| SelectCAEEdge | Represents a single object selection |
| SelectCAEEdgeList | Represents a list of objects on a selection list |
| SelectCAEFace | Represents a single object selection |
| SelectCAEFaceList | Represents a list of objects on a selection list |
| SelectElementsBuilder | Represents a NXOpen::CAE::SelectElementsBuilder To create a new instance of this class, use NXOpen::CAE::SelectElementsManager::CreateSelectElementsBuilder Created in NX5.0.0 |
| SelectElementsManager | Provides method for creating builder for select element operation commands in both fem and sim part |
| SelectFEElemFaceList | Represents a list of objects on a selection list |
| SelectFENode | Represents a single object selection |
| SelectFENodeList | Represents a list of objects on a selection list |
| SelectGroupsBuilder | Represents a NXOpen::CAE::SelectGroupsBuilder To create a new instance of this class, use NXOpen::CAE::SelectGroupsManager::CreateSelectGroupsBuilder Created in NX1847.0.0 |
| SelectGroupsManager | Provides method for creating builder for select groups operation commands in both fem and sim part |
| SelectionRecipe | Represents a class NXOpen::CAE::SelectionRecipe |
| SelectionRecipeCollection | Provides methods for managing Selection Recipes NXOpen::CAE::SelectionRecipe |
| iterator | Iterator for accessing the contents of the collection |
| SelectionRecipeDisplay | Represents the display attributes of a CAE::SelectionRecipe |
| SelectMeshList | Represents a list of objects on a selection list |
| SelRecipeAdapter | Selection Recipe Adapter Use the NXOpen::CAE::SelRecipeBuilder class to add strategy |
| SelRecipeAttributeStrategy | Selection Recipe Attribute Strategy Use the NXOpen::CAE::SelRecipeBuilder class to add strategy |
| SelRecipeBaseStrategy | Selection Recipe Base Strategy Use the NXOpen::CAE::SelRecipeBuilder class to add strategy |
| SelRecipeBoundingVolumeStrategy | Selection Recipe Bounding Volume Strategy Use the NXOpen::CAE::SelRecipeBuilder class to add strategy |
| SelRecipeBuilder | Selection Recipe Builder To create a new instance of this class, use NXOpen::CAE::SelectionRecipeCollection::CreateSelRecipeBuilder Created in NX1847.0.0 |
| SelRecipeCoordinateStrategy | Represents a coordinate strategy that resolves to a single node |
| SelRecipeLabelRangeStrategy | Represents a Selection Recipe Strategy based on label ranges |
| SelRecipePointStrategy | Represents a point strategy that resolves to a single node |
| SelRecipeProximityStrategy | Represents a proximity strategy |
| SelRecipeSingleLabelStrategy | Represents a Label Strategy that resolved to a single Node Label |
| SelRecipeStrategy | Selection Recipe Strategy Use the NXOpen::CAE::SelRecipeBuilder class to add strategy |
| SensorSet | Represents a NXOpen::CAE::SensorSet This is a sub object Created in NX1847.0.0 |
| SensorSetMgr | Represents a NXOpen::CAE::SensorSetMgr |
| SensorSetRef | Represents a NXOpen::CAE::SensorSetRef No creator for this object |
| SetManager | Represents a group of CAE object sets |
| SetObject | Structure used to pass objects into SetManager and CAESet |
| ShapeMetricViewerBuilder | Represents the correlation Shape metrics viewer builder To create a new instance of this class, use NXOpen::CAE::CorrelSolutionCollection::CreateShapeMetricViewerBuilder Created in NX7.5.0 |
| Shell2SolidBuilder | Represents 3D Tet Mesh Used to create a CAE::Mesh3d To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateShell2solidBuilder Created in NX6.0.0 |
| ShellEADBuilder | This class provides Shell Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateShellEadBuilder Default values |
| ShellTo3dHybridBuilder | Represents 3D Shell To Hybrid mesh Used to create a CAE::Mesh3d To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateShellto3dhybridBuilder Created in NX12.0.0 |
| ShipMeshAutomation | Represents Ship Mesh Automation This is an abstract class Created in NX11.0.2 |
| ShipMeshAutomationBuilder | Represents Ship Mesh Automation Used to create a NXOpen::CAE::ShipMeshAutomation To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateShipMeshAutomationBuilder Created in NX11.0.2 |
| ShowAdjacentBuilder | Represents a NXOpen::CAE::ShowAdjacentBuilder To create a new instance of this class, use NXOpen::CAE::ShowHideManager::CreateShowAdjacentBuilder Created in NX5.0.0 |
| ShowAdjacentGroupMethod | Represents the output from the Show Hide Group smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| ShowElemNodeLabelsBuilder | Represents a CAE::ShowElemNodeLabelsBuilder |
| ShowHideBuilder | Represents a NXOpen::CAE::ShowHideBuilder To create a new instance of this class, use NXOpen::CAE::ShowHideManager::CreateShowHideBuilder Created in NX5.0.0 |
| ShowHideGroupMethod | Represents the output from the Show Hide Group smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX11.0.0 |
| ShowHideManager | Provides method for creating builder for Show Hide operation commands in a fem/sim part |
| ShowOnlyBuilder | Represents a NXOpen::CAE::ShowOnlyBuilder To create a new instance of this class, use NXOpen::CAE::ShowHideManager::CreateShowOnlyBuilder Created in NX5.0.0 |
| SignalProcessingDBSettings | This is the class handling the dB settings option: a dB reference value and a dB format (10 or 20) |
| SignalProcessingPlotData | Exposes the ability to change the Spectrum scaling, correction mode and acoustical weighting applied on a curve displayed in a XY plot |
| SimAutoBcRecipe | Represents a simulation recipe containing the parameters needed for the generation of a set of face pairs from the faces/bodies in the model |
| SimBC | Represents BC class which is a superclass to NXOpen::CAE::SimLoad and NXOpen::CAE::SimConstraint |
| SimBCBuilder | This is a manager to the CAE::SimBC class |
| SimBCDisplay | Represents a BC display attributes |
| SimBcGroup | Represents a BC group in a solution or solution step |
| SimBcPlotContoursBuilder | Represents a NXOpen::CAE::SimBcPlotContoursBuilder builder which can be used to generate a plot of a NXOpen::CAE::SimBC in the graphics area |
| SimBcXyPlotBuilder | Represents a NXOpen::CAE::SimBcXyPlotBuilder builder which can be used to generate a XY plot of a NXOpen::CAE::SimBC in the graphics area |
| SimCondition | This class represents a Condition which defines a state where all or some values of NXOpen::CAE::SimConditionParam are known |
| SimConditionCollection | This class is a collection of NXOpen::CAE::SimCondition |
| iterator | Iterator for accessing the contents of the collection |
| SimConditionParam | This class represents a named measurable quantity |
| SimConditionParamCollection | This class is a collection of NXOpen::CAE::SimConditionParam which represents a measurable environment |
| iterator | Iterator for accessing the contents of the collection |
| SimConditionSeqMgr | This is the manager for Condition Sequences |
| SimConditionSequence | This class represents a time history of NXOpen::CAE::SimCondition |
| SimConditionSequenceCollection | This class is a collection of NXOpen::CAE::SimConditionSequence |
| iterator | Iterator for accessing the contents of the collection |
| SimConditionTimeStep | This class represents a step in the time history of a NXOpen::CAE::SimConditionSequence |
| SimConditionTimeStepCollection | This class is a collection of NXOpen::CAE::SimConditionTimeStep |
| iterator | Iterator for accessing the contents of the collection |
| SimConstraint | Represents a constraint |
| SimConstraintCollection | Provides methods for managing constraints NXOpen::CAE::SimConstraint in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| SimConstraintGroup | Represents a constraint group in a solution or solution step |
| SimConstraintSet | Represents a cae constraint set object |
| SimConstraintSetBuilder | Represents a CAE::SimConstraintSetBuilder builder To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateConstraintSetBuilder Created in NX11.0.0 |
| SimConstraintSetCollection | Provides methods for managing SimConstraintSet in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| SimGroupContainer | Represents UGS::CaeSim::LbcGroupContainer |
| SimLbcFolder | Represents a folder object in the .sim files |
| SimLbcFolderCollection | Provides methods for managing LbcFolders NXOpen::CAE::SimLbcFolder in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| SimLoad | Represents a load |
| SimLoadCollection | Provides methods for managing loads NXOpen::CAE::SimLoad in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| SimLoadGroup | Represents a load group in a solution or solution step |
| SimLoadRecipe | This is the class handling the attributes of a load recipe |
| SimLoadRecipeCollection | This class is a collection of NXOpen::CAE::SimLoadRecipe |
| iterator | Iterator for accessing the contents of the collection |
| SimLoadRecipeFunctionAttributes | This is the class handling the default attributes of a source used by a load recipe |
| SimLoadRecipeLbcGenerator | Handles generation of subcases and loads based on a NXOpen::CAE::SimLoadRecipe |
| SimLoadRecipeMapEntry | These objects represent one line in a NXOpen::CAE::SimLoadRecipe 's mapping |
| SimLoadRecipeMapEntryCollection | This class is a collection of NXOpen::CAE::SimLoadRecipeMapEntry s |
| iterator | Iterator for accessing the contents of the collection |
| SimLoadRecipeMapEntryTargetTypes | The class handles the enum definitions needed by load recipe map entries |
| SimLoadRecipeMapping | This is the class handling the mapping of a certain load type of a load recipe |
| SimLoadRecipeMappingCollection | This class is a collection of NXOpen::CAE::SimLoadRecipeMapping s |
| iterator | Iterator for accessing the contents of the collection |
| SimLoadRecipeSource | This is the class handling the attributes of a source used by a load recipe |
| SimLoadRecipeSourceCollection | This class is a collection of NXOpen::CAE::SimLoadRecipeSource |
| iterator | Iterator for accessing the contents of the collection |
| SimLoadRecipeTypes | The class handles the enum definitions needed by load recipes |
| SimLoadSet | Represents a cae load set object |
| SimLoadSetBuilder | Represents a NXOpen::CAE::SimLoadSetBuilder builder To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateLoadSetBuilder Created in NX10.0.0 |
| SimLoadSetCollection | Provides methods for managing NXOpen::CAE::SimLoadSet in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| SimMotionLoadsBuilder | Represents a NXOpen::CAE::SimMotionLoadsBuilder To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateMotionLoadsBuilder Created in NX5.0.1 |
| SimMotionLoadsListItemBuilder | Represents a NXOpen::CAE::SimMotionLoadsListItemBuilder To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateMotionLoadsListItemBuilder Created in NX5.0.1 |
| SimPart | Represents an NX part of type .sim |
| ImportErrorCodes | Contains list of error codes for import of each entity type |
| ImportOptions | Contains information about which entities to be imported |
| SimRecipe | This is an abstract class |
| SimRecipeCollection | Provides methods for managing NXOpen::CAE::SimRecipe in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| SimResultReference | Represents a Result Reference in the .sim files |
| SimSimulation | This is the root object in a .sim file |
| SimSimulationObject | Represents a simulation object |
| SimSimulationObjectCollection | Provides methods for managing simulation objects NXOpen::CAE::SimSimulationObject in a sim part |
| iterator | Iterator for accessing the contents of the collection |
| SimSimulationObjectGroup | Represents a simulation object group in a solution or solution step |
| SimSolution | Represents a solution in the .sim files |
| SimSolutionCollection | Provides methods for managing Solutions NXOpen::CAE::SimSolution in a NXOpen::CAE::SimSimulation |
| iterator | Iterator for accessing the contents of the collection |
| SimSolutionStep | Represents a subcase/step in a solution |
| SimSolveManager | Represents a NXOpen::CAE::SimSolveManager manager which is used to manage the solve process of solutions |
| SingleLabelSelectionRecipe | Represents a Selection Recipe based on a single Node Label |
| SketchCurves | Represents a Beam Cross Section This is an abstract class Created in NX7.5.0 |
| SketchCurvesCollection | Represents the collection of all NXOpen::CAE::SketchCurves in a fem part |
| iterator | Iterator for accessing the contents of the collection |
| SliverFaceMethod | Represents the output from the sliver face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| SmartSelectionManager | Provides methods for creating smart selection methods in a cae part |
| SmoothOptResultsBuilder | This builder is meant for optimization results related to material density |
| SolidPropertyCheckBuilder | Represents a NXOpen::CAE::SolidPropertyCheckBuilder To create a new instance of this class, use NXOpen::CAE::ModelCheckManager::CreateSolidPropertyCheckBuilder Created in NX5.0.1 |
| SolutionManager | Represents NXOpen::CAE::SolutionManager To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateSolutionManager Created in NX10.0.0 |
| SolutionResult | Represents analysis results for a given NXOpen::CAE::SimSolution |
| SolverAppendOption | This class provides access to the append option setting for importing solver specific data into existing Fem/Sim |
| SphereBoundingVolume | Represents Sphere Bounding Volume for Selection Recipe This is a sub object Created in NX12.0.0 |
| SpiderElementBuilder | Represents a NXOpen::CAE::SpiderElementBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateSpiderElementBuilder Created in NX5.0.1 |
| SpringEADBuilder | This class provides Spring Associated Data Support To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateSpringEadBuilder Default values |
| StandardBeamSection | Represents a Standard Beam Cross Section To create or edit an instance of this class, use NXOpen::CAE::StandardBeamSectionBuilder Created in NX7.5.0 |
| StandardBeamSectionBuilder | Represents a NXOpen::CAE::StandardBeamSectionBuilder To create a new instance of this class, use NXOpen::CAE::BeamSectionsCollection::CreateStandardBeamSectionBuilder Created in NX7.5.0 |
| StepManager | Represents NXOpen::CAE::StepManager To create a new instance of this class, use NXOpen::CAE::SimSimulation::CreateStepManager Created in NX10.0.0 |
| SuppressHoleBuilder | Builder for creating Hole Suppression Hole To create a new instance of this class, use NXOpen::CAE::AbstractionManager::CreateSuppressHoleBuilder Default values |
| SurfaceCoatBuilder | Builder for creating Surface Coat To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateSurfaceCoatBuilder Created in NX6.0.1 |
| SwapDiagonalBuilder | Represents a NXOpen::CAE::SwapDiagonalBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateSwapDiagonalBuilder Created in NX12.0.0 |
| SweepBetweenMeshBuilder | Builder for creating swept mesh between faces |
| SweptMesh | Represents swept Mesh To create or edit an instance of this class, use NXOpen::CAE::Mesh3dHexBuilder Created in NX6.0.0 |
| TangentContinuousEdgeMethod | Represents the output from the circular edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX7.5.1 |
| TangentFaceMethod | Represents the output from the tangent face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0 |
| TestModel | Represents a NXOpen::CAE::TestModel |
| TestModelCollection | Represents a collection of Data Processing meta solution |
| iterator | Iterator for accessing the contents of the collection |
| ThickenMeshBuilder | Represents a NXOpen::CAE::ThickenMeshBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementManager::CreateThickenMeshBuilder Created in NX11.0.0 |
| ThicknessBuilder | Represents a NXOpen::CAE::ThicknessBuilder To create a new instance of this class, use NXOpen::CAE::NodeElementInfoManager::CreateThicknessBuilder Created in NX6.0.1 |
| ThicknessPlotContours | Represents a NXOpen::CAE::ThicknessPlotContours object returned from NXOpen::CAE::ThicknessPlotContoursBuilder::CreatePlotObject in NXOpen::CAE::ThicknessPlotContoursBuilder |
| ThicknessPlotContoursBuilder | Represents a NXOpen::CAE::ThicknessPlotContoursBuilder builder which can be used to generate a plot of a NXOpen::CAE::SimBC in the graphics area |
| TransientResultsReductionBuilder | Represents a NXOpen::CAE::TransientResultsReductionBuilder To obtain an instance of this class use NXOpen::Session::ResultManager |
| UnifiedDatabaseOptions | Represents the sum of options associated with the "Generic Data Source" format |
| Flag | Represents additional flags to configure a CAE::DataSource |
| UnStitchEdgeBuilder | Represents a NXOpen::CAE::UnStitchEdgeBuilder To create a new instance of this class, use NXOpen::CAE::FemPart::CreateUnStitchEdgeBuilder Created in NX6.0.0 |
| UserDefinedSolidBeamSection | Represents a User-Defined Solid Beam Cross Section To create or edit an instance of this class, use NXOpen::CAE::UserDefinedSolidBeamSectionBuilder Created in NX7.5.0 |
| UserDefinedSolidBeamSectionBuilder | Represents a NXOpen::CAE::UserDefinedSolidBeamSectionBuilder To create a new instance of this class, use NXOpen::CAE::BeamSectionsCollection::CreateUserDefinedSolidBeamSectionBuilder Created in NX7.5.0 |
| VatvSet | This is the class representing a Vatv result set |
| VatvSetBuilder | Represents a NXOpen::CAE::VatvSetBuilder which can be used to create VATVSets |
| VatvSetCollection | This class is a collection of NXOpen::CAE::VatvSet |
| iterator | Iterator for accessing the contents of the collection |
| ViewLaminateBuilder | Represents a View Laminate Builder |
| ViewLayoutManager | Represents Interface to access CAE View Layout Manager object To obtain an instance of this class, refer to NXOpen::BasePart Created in NX12.0.0 |
| ViewXY | Represents x and y bounds of a particular view |
| ViewportSynchronizationOptions | This class represents a NXOpen::CAE::ViewportSynchronizationOptions |
| WeldBuilder | Represents a NXOpen::CAE::WeldBuilder To create a new instance of this class, use NXOpen::CAE::MeshManager::CreateWeldBuilder Created in NX7.5.2 |
| WeldRow | Represents a CAE weld row |
| CAM | Provides classes and interfaces for Manufacturing |
| FBM | Provides classes and interfaces for Manufacturing |
| Feature | Interface for CAM Feature objects This is an abstract class, and cannot be instantiated |
| FeatureGeometry | Represents a feature geometry builder This is an abstract class and cannot be instantiated |
| FeatureSet | Interface for feature set To create a new instance of this class, use NXOpen::CAM::FBM::FeatureGeometry::CreateFeatureSet Created in NX9.0.0 |
| MachiningFeatureGeometry | Represents a feature geometry builder An instance of this class can be obtained from CAM::HoleBossGeom::GetCenterHoleGeometry or CAM::HoleBossGeom::GetChamferHoleGeometry Created in NX9.0.0 |
| ThreadFeatureGeometry | Represents a feature geometry builder This is an abstract class and cannot be instantiated |
| AcrossVoids | Represents a NXOpen::CAM::AcrossVoids Created in NX6.0.0 |
| AlongMachineAxisMoveBuilder | Represents Along MCS Axis Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateAlongMcsAxisMoveBuilder Created in NX5.0.0 |
| AlongMcsAxisMoveBuilder | Represents Along MCS Axis Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateAlongMcsAxisMoveBuilder Created in NX5.0.0 |
| AlongToolAxisMoveBuilder | Represents the Move To Point Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateAlongToolAxisMoveBuilder Created in NX5.0.0 |
| AngularAboutAxisMoveBuilder | Represents the angular about axis builder |
| ArcOutputTypeCiBuilder | Represents a ArcOutputTypeCiBuilder Created in NX5.0.0 |
| AreaMillingContainment | Represents a Containment Builder Created in NX9.0.0 |
| AreaMillingNonSteepContainment | Represents a NonSteep Containment Builder Created in NX9.0.0 |
| AreaMillingSteepContainment | Represents a Steep Containment Builder Created in NX9.0.0 |
| AvoidanceMethodsBuilder | Represents an avoidance methods builder Created in NX12.0.1 |
| AxisMoveBuilder | Represent Axis Move Created in NX12.0.1 |
| BarrelToolBuilder | Represents a BarrelTool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateBarrelToolBuilder Created in NX5.0.0 |
| BaseBuilder | Represents a NXOpen::CAM::BaseBuilder |
| Blade | Represents a Blade Rough Drive Method Builder This is an abstract superclass that has instantaible subclasses Created in NX7.0.0 |
| BladeCutLevels | Represents a Blade Cut Levels Builder This is an abstract class and cannot be instantiated |
| BladeCutStart | Represents a Blade Rough Drive Method Builder This is an abstract superclass that has instantaible subclasses Created in NX7.5.0 |
| BladeEdge | Represents a BladeEdge Builder Created in NX7.0.0 |
| BladeFinish | Represents a Blade Finish Drive Method Builder Created in NX7.5.0 |
| BladeFinishGeom | Represents BladeFinishGeom Builder Created in NX7.5.0 |
| BladeFinishPass | Represents a blade finish pass builder Created in NX12.0.2 |
| BladeGeometryType | Represents a blade geometry type builder Created in NX12.0.2 |
| BladeRough | Represents a Blade Rough Drive Method Builder Created in NX7.0.0 |
| BladeSideEntry | Represents a blade side entry builder Created in NX12.0.2 |
| BladeStartPoint | Represents BladeStartPoint Builder Created in NX7.5.0 |
| BladeStepOver | Represents a blade stepover builder Created in NX12.0.2 |
| BlankIpw | Represents the blank ipw builder for blank definition To obtain an instance of this class use the NXOpen::CAM::GeometryGroup Created in NX8.0.0 |
| BlankIpwMultipleSource | Blank IPW builder for blank definition To obtain an instance of this class use the NXOpen::CAM::GeometryGroup Created in NX1847.0.0 |
| BlankIpwSet | Blank IPW builder for blank definition To obtain an instance of this class use the NXOpen::CAM::GeometryGroup Created in NX1847.0.0 |
| BlankIpwSetList | Represents a list of objects |
| BlendFinish | Represents a Blend Finish Drive Method Builder Created in NX7.5.0 |
| Boundary | Represents a CAM boundary object This is an abstract class and cannot be instantiated |
| BoundaryInnerWireEDM | Represents an inner boundary in wire edm This is an abstract class and cannot be instantiated |
| BoundaryMemberEvents | Represents a NXOpen::CAM::BoundaryMemberEvents To create a new instance of this class, use NXOpen::CAM::BoundaryMemberSetWireEDM::CreateMemberEvent Created in NX12.0.1 |
| BoundaryMemberEventsList | Represents a list of objects |
| BoundaryMemberSet | Represents a boundary member set |
| BoundaryMemberSetList | Represents a list of objects |
| BoundaryMemberSetPlanarMill | Represents a boundary member set |
| BoundaryMemberSetWireEDM | Represents a boundary member set |
| BoundaryMillingMemberSet | Represents a boundary member set |
| BoundaryMillingSet | Represents a boundary milling set |
| BoundaryPlanarMill | Represents a CAM boundary object This is an abstract class and cannot be instantiated |
| BoundarySet | Represents a boundary set |
| BoundarySetList | Represents a list of objects |
| BoundarySetPlanarMill | Represents a boundary set for the planar mill/surface contour operation To create a new instance of this class, use NXOpen::CAM::Boundary::CreateBoundarySetPlanarMill Created in NX11.0.1 |
| BoundarySetWireEDM | Represents a boundary set for wire EDM To create a new instance of this class, use NXOpen::CAM::Boundary::CreateBoundarySetWireEdm Created in NX12.0.1 |
| BoundaryTurnBlank | Represents a NXOpen::CAM::BoundaryTurnBlank This builder cannot be instantiated separately |
| BoundaryTurnMemberCorner | Represents a NXOpen::CAM::BoundaryTurnMemberCorner This builder cannot be instantiated separately |
| BoundaryTurnMemberEvents | Represents a NXOpen::CAM::BoundaryTurnMemberEvents This builder cannot be instantiated separately |
| BoundaryTurnMemberFeed | Represents a NXOpen::CAM::BoundaryTurnMemberFeed This builder cannot be instantiated separately |
| BoundaryTurnMemberFineFinishCorner | Represents a NXOpen::CAM::BoundaryTurnMemberFineFinishCorner This builder cannot be instantiated separately |
| BoundaryTurnMemberFineFinishOffset | Represents a NXOpen::CAM::BoundaryTurnMemberFineFinishOffset This builder cannot be instantiated separately |
| BoundaryTurnMemberOffset | Represents a NXOpen::CAM::BoundaryTurnMemberOffset This builder cannot be instantiated separately |
| BoundaryTurnMemberSet | Represents a boundary turning member set |
| BoundaryTurnSet | Represents a boundary turning set |
| BoundaryTurnVariableStock | Represents a BoundaryTurnVariableStock This is an abstract class and cannot be instantiated |
| BoundaryTurnVariableStockSet | Represents a turning boundary variable stock set To create a new instance of this class, use NXOpen::CAM::BoundaryTurnVariableStock::CreateItemBuilder Created in NX9.0.2 |
| BoundaryTurnVariableStockSetList | Represents a list of objects |
| BoundaryWireEDM | Represents a CAM boundary object This is an abstract class and cannot be instantiated |
| CAMAttribute | Represents a CAM Feature Attribute To obtain an instance of this class use NXOpen::CAM::CAMFeature Created in NX8.0.0 |
| CAMAttributeCollection | Represents the CAM Attribute collection To obtain an instance of this class, refer to NXOpen::CAM::CAMFeature Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CAMFeature | Represents a CAM Feature To obtain an instance of this class use NXOpen::CAM::FeatureRecognitionBuilder Created in NX7.5.0 |
| CAMFeatureCollection | Represents the CAMFeature collection To obtain an instance of this class, refer to NXOpen::BasePart Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| CAMFeatureList | Represents a list of objects |
| CAMObject | Represents interface for all CAM Object To create or edit an instance of this class, use NXOpen::CAM::ParamBuilder Created in NX4.0.0 |
| ErrorItem | Error Item |
| CamOperationCircularMotionDataType | Circular motion data type |
| CamOperationFeedContentType | Feed content type |
| CamOperationHelicalMotionDataType | Helical motion data type |
| CamOperationLinearMotionDataType | Linear motion data type |
| CamOperationMotionContactDataType | Motion contact data type |
| CamOperationMotionPostDataType | Motion post data type |
| CamOperationMotionPosType | Motion pos type |
| CAMSession | Represents cam session To obtain an instance of this class, refer to NXOpen::Session Created in NX4.0.0 |
| CAMSetup | Cam setup To obtain an instance of this class, use NXOpen::Part::CAMSetup Created in NX4.0.0 |
| CavityMilling | Represents a Cavity Milling Operation To create or edit an instance of this class, use NXOpen::CAM::CavityMillingBuilder Created in NX7.5.0 |
| CavityMillingBuilder | Represents a CavityMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateCavityMillingBuilder Created in NX5.0.0 |
| CenterlineDrillTurning | Represents a Centerline Drill Turning operation To create or edit an instance of this class, use NXOpen::CAM::CenterlineDrillTurningBuilder Created in NX7.5.0 |
| CenterlineDrillTurningBuilder | Represents a CenterlineDrillTurningBuilder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateCenterlineDrillTurningBuilder Created in NX6.0.0 |
| CenterlineDrillVariableIncrementBuilder | Represents a Turn Avoidance Path Points Builder Created in NX6.0.0 |
| ChamferMilling | Represents a Chamfer Milling Operation To create or edit an instance of this class, use NXOpen::CAM::ChamferMillingBuilder Created in NX9.0.2 |
| ChamferMillingBuilder | Represents a ChamferMillingBuilder Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateChamferMillingBuilder Created in NX9.0.2 |
| ChipControl | Represents a NXOpen::CAM::ChipControl |
| CircularAboutAxisMoveBuilder | Represents the Circular Move To Point Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateCircularAboutAxisMoveBuilder Created in NX5.0.0 |
| CleanupOutput | Represents a NXOpen::CAM::CleanupOutput Created in NX6.0.0 |
| CleanupSettings | Represents a NXOpen::CAM::CleanupSettings Created in NX6.0.0 |
| CollisionConfigurationBuilder | Represents a NXOpen::CAM::CollisionConfigurationBuilder This is an abstract class, and cannot be instantiated |
| CollisionPairBuilder | Represents a NXOpen::CAM::CollisionPairBuilder To create a new instance of this class, use NXOpen::SIM::KinematicConfigurator::CreateCollisionPairBuilder Created in NX6.0.0 |
| CollisionPairBuilderList | Represents a list of objects |
| ContourAngle | Represents a NXOpen::CAM::ContourAngle |
| ConvertFromMCDBuilder | Represents a NXOpen::CAM::ConvertFromMCDBuilder To create a new instance of this class, use NXOpen::SIM::KinematicConfigurator::CreateConvertFromMcdBuilder Created in NX9.0.0 |
| CornerControlBuilder | Represents a FinishPasses Builder Created in NX6.0.0 |
| CurveBuilder | Represents a curve builder Created in NX1847.0.0 |
| CurveItemBuilder | Represents the curve item This cannot be instantiated Created in NX12.0.2 |
| CurveItemBuilderList | Represents a list of objects |
| CurveListBuilder | Represents a curve list Created in NX12.0.2 |
| CustomLoops | Represents a CustomLoops object |
| CustomLoopSet | Represents a loop set object To create a new instance of this class, use NXOpen::CAM::CustomLoops::CreateLoopSet |
| CustomLoopSetList | Represents a list of objects |
| CutAngle | Represents a boundary cut angle ci Builder Created in NX6.0.0 |
| CutBand | Cut Band Builder Created in NX7.5.0 |
| Cutcom | Represents a NXOpen::CAM::Cutcom Created in NX6.0.2 |
| CutDepthChecker | Represents a cut depth checker object This has not creator Created in NX8.5.0 |
| CutDirection | Represents a boundary cut direction ci Builder This builder can not instantiated separately |
| CutDwell | Represents a NXOpen::CAM::CutDwell |
| CutLevel | Represents a cut level object for cavity mill and zlevel mill |
| CutLevelPlanar | Represents a cut level object for planar mill |
| CutParameters | Represents a NXOpen::CAM::CutParameters |
| CutPatternBuilder | Represents a Cut Pattern Builder Created in NX6.0.0 |
| CutRegionsBuilder | Represents a Cut Regions Builder Created in NX9.0.0 |
| CutSideBuilder | Represents a cut side builder This is an abstract class and cannot be instantiated |
| CutSides | Represents a Cut Sides Builder Created in NX7.5.0 |
| CutStrategy | Represents cut strategy Created in NX6.0.0 |
| CutterExport | Represents Cutter Export Builder Created in NX9.0.0 |
| CutVolume | The classs represent the sub builder for creating cut volume feature items To create a new instance of this class, use NXOpen::CAM::CutVolumeGeom::CreateCutVolume Created in NX8.0.0 |
| CutVolumeGeom | The classs represent the builder for creating cut volume features Created in NX8.0.0 |
| CutVolumeList | Represents a list of objects |
| Cycle | Represets a User Defined Event Created in NX9.0.0 |
| CycleCoolant | Represets a User Defined Event Created in NX10.0.2 |
| CycleDwell | Represets a User Defined Event Created in NX10.0.2 |
| CycleNodragClearance | Represets a User Defined Event Created in NX11.0.0 |
| CycleSpindle | Represets a User Defined Event Created in NX10.0.2 |
| CycleStepRetract | Represets a User Defined Event Created in NX10.0.2 |
| CycleTipRelease | Represets a User Defined Event Created in NX10.0.2 |
| CylinderMilling | Represents a Cylinder Milling Operation To create or edit an instance of this class, use NXOpen::CAM::CylinderMillingBuilder Created in NX9.0.1 |
| CylinderMillingBuilder | Represents a CylinderMillingBuilder Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateCylinderMillingBuilder Created in NX8.0.0 |
| CylinderMillingCutParameters | Represents a CylinderMillingCutParameters Builder Created in NX8.0.0 |
| CylindricalMillingBuilder | Represents a CylindricalMilling Builder This is an abstract class and cannot be instantiated |
| CylindricalMillingCutParameters | Represents a CylindricalMillingCutParameters Builder This is an abstract class and cannot be instantiated |
| DeltaMoveBuilder | Represents the Delta Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateDeltaMoveBuilder Created in NX5.0.0 |
| DimensionRule | Represents a DimensionRule Builder Created in NX11.0.2 |
| DisplayPaint | Represents a display paint Builder This is an abstract class and cannot be instantiated |
| DisplayPath | Represents a display path Builder This is an abstract class and cannot be instantiated |
| DisplaySilhouette | Represents a display silhouette Builder This is an abstract class and cannot be instantiated |
| DisplayTool | Represents a display tool Builder This is an abstract class and cannot be instantiated |
| DmAmBuilder | Represents a Area Milling Drive Method Builder Created in NX5.0.0 |
| DmBndBuilder | Represents a Boundary Drive Method Builder Created in NX5.0.0 |
| DmCmBuilder | Represents a DmCmBuilder Created in NX5.0.0 |
| DmCmMultiplePassesCiBuilder | Represents a DmCmMultiplePassesCiBuilder To obtain an instance of this class use CAM::DmCmBuilder::DmCmMultiplePassesBuilder Created in NX5.0.0 |
| DmCurveBuilder | Represents a Curve Drive Method Builder Created in NX5.0.0 |
| DmRadBuilder | Represents a DmRadBuilder Builder Created in NX5.0.0 |
| DmRotaryFloorFinishBuilder | Represent rotary floor finish builder Created in NX9.0.0 |
| DmSpiralBuilder | Represents a Spiral Drive Method Builder This is an abstract class and cannot be instantiated |
| DmStreamlineCutStep | Represents a streamline cut step builder This object is a sub-object and cannot be instantiated |
| DmSurfBuilder | Represents a DmSurfBuilder Created in NX5.0.0 |
| DmToolPosition | Represents a streamline tool position builder This is an abstract class and cannot be instantiated |
| DmTpBuilder | Represents a tool path Drive Method Builder This is an abstract class and cannot be instantiated |
| DmTrimExtend | Represents a streamline trim and extend builder This is an abstract class and cannot be instantiated |
| DmUserExitCiBuilder | Represents a exit name ci Builder Created in NX5.0.0 |
| Documentation | Represents a Documentation operation To create or edit an instance of this class, use NXOpen::CAM::DocumentationBuilder Created in NX9.0.3 |
| DocumentationBuilder | Represents a Documentation Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateDocumentationBuilder Created in NX9.0.3 |
| DoubleIntentData | The data for CamUI_DoubleIntentComp Created in NX5.0.0 |
| DoubleStatusData | The data for CamUI_DoubleStatusComp Created in NX5.0.0 |
| DPMItpBuilder | Represents an DPMItp Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateDpmitpBuilder Created in NX5.0.0 |
| DPMTubeBuilder | Represents a Tube Drive Builder Created in NX11.0.1 |
| DrillBackCountersinkTool | Represents a Drill Back Countersink Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillBackCountersinkTool Created in NX10.0.2 |
| DrillBackSpotfacingToolBuilder | Represents a drill back spotfacing Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillBackSpotfacingToolBuilder Created in NX5.0.0 |
| DrillBoreToolBuilder | Represents a drill bore Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillBoreToolBuilder Created in NX5.0.0 |
| DrillBoringBarTool | Represents a new Boring Bar Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillBoringBarTool Created in NX11.0.1 |
| DrillBurnishingToolBuilder | Represents a drill burnishing Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillBurnishingToolBuilder Created in NX5.0.0 |
| DrillCenterBellToolBuilder | Represents a Drill Center Bell Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillCenterBellToolBuilder Created in NX5.0.0 |
| DrillChamferBoringBarTool | Represents a Chamfer Boring Bar Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillChamferBoringBarTool Created in NX11.0.1 |
| DrillCoreToolBuilder | Represents a drill core Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillCoreToolBuilder Created in NX9.0.0 |
| DrillCounterboreToolBuilder | Represents a drill counterbore Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillCounterboreToolBuilder Created in NX5.0.0 |
| DrillCtskToolBuilder | Represents a Drill Ctsk Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillCtskToolBuilder Created in NX5.0.0 |
| DrillGeomBuilder | Represents a DrillGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillGeomBuilder Created in NX5.0.0 |
| DrillMethodBuilder | Represents a Drill Method Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillMethodBuilder Created in NX5.0.0 |
| DrillReamerToolBuilder | Represents a drill Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillReamerToolBuilder Created in NX5.0.0 |
| DrillSpotdrillToolBuilder | Represents a drill spotdrill Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillSpotdrillToolBuilder Created in NX5.0.0 |
| DrillSpotfaceToolBuilder | Represents a drill spotface tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillSpotfaceToolBuilder Created in NX5.0.0 |
| DrillStdToolBuilder | Represents a drill std Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillStdToolBuilder Created in NX5.0.0 |
| DrillStepToolBuilder | Represents a drill step Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillStepToolBuilder Created in NX5.0.0 |
| DrillSurfaceBuilder | Represents a Drill Surface Builder This is an abstract class and cannot be instantiated |
| DrillTapToolBuilder | Represents a drill tap Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillTapToolBuilder Created in NX5.0.0 |
| DrillThreadMillToolBuilder | Represents a drill thread mill Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateDrillThreadMillToolBuilder Created in NX5.0.0 |
| DrillToolBuilder | Represents a drill Tool Builder This is an abstract class, and cannot be instantiated |
| DriveChainItemBuilder | Represents the Drive Chain Item Builder This cannot be instantiated Created in NX6.0.0 |
| DriveChainItemBuilderList | Represents a list of objects |
| DriveMode | Drive Mode Builder Created in NX7.5.0 |
| EdgeFinish | Represents a Blade Finish Drive Method Builder Created in NX7.5.0 |
| EditSubopCommand | Represents an Edit Subop Command Builder Created in NX9.0.0 |
| ElementDoubleBuilder | Represents a builder for an Element double value in of a CAM.CAMObject Created in NX9.0.3 |
| ElementIntBuilder | Represents a builder for an Element int value in of a CAM.CAMObject Created in NX10.0.1 |
| ElementStringBuilder | Represents a builder for an Element int value in of a CAM.CAMObject Created in NX10.0.3 |
| Engraving | Represents a Engraving Operation To create or edit an instance of this class, use NXOpen::CAM::EngravingBuilder Created in NX7.5.0 |
| EngravingBuilder | Represents a Engraving Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateEngravingBuilder Created in NX5.0.0 |
| ExpressionDouble | Represents expression double Created in NX11.0.2 |
| ExpressionInteger | Represents expression double Created in NX12.0.2 |
| ExtendAtEdges | Represents a NXOpen::CAM::ExtendAtEdges Created in NX6.0.0 |
| FaceMilling | Represents a Face Milling Operation To create or edit an instance of this class, use NXOpen::CAM::FaceMillingBuilder Created in NX7.5.0 |
| FaceMillingBuilder | Represents a FaceMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateFaceMillingBuilder Created in NX5.0.0 |
| FacesSequence | Represents faces sequence Created in NX6.0.0 |
| FeatureBasedGeomBuilder | Represents a FeatureBasedGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateFeatureBasedGeomBuilder Created in NX5.0.0 |
| FeatureGeomBuilder | Represents a FeatureGeom Builder This is an abstract class, and cannot be instantiated |
| FeatureGeometry | Represents a Base Geometry Group To create or edit an instance of this class, use NXOpen::CAM::FeatureGeomBuilder Created in NX7.5.0 |
| FeatureGeometryGroup | Represents a CAM Feature Group To obtain an instance of this class use NXOpen::CAM::FeatureRecognitionBuilder Created in NX8.0.0 |
| FeatureGroupBuilder | Represents a FeatureBasedGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateFeatureGroupBuilder Created in NX9.0.3 |
| FeatureMilling | Represents a Feature Milling Operation To create or edit an instance of this class, use NXOpen::CAM::FeatureMillingBuilder Created in NX7.5.0 |
| FeatureMillingBuilder | Represents a FeatureMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateFeatureMillingBuilder Created in NX5.0.0 |
| FeatureMillingCutParameters | Represents a FeatureMillingCutParameters Builder Created in NX9.0.2 |
| FeatureProcessBuilder | The Create Feature Process Builder class creates operations and features groups To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateFeatureProcessBuilder Default values |
| FeatureRecognitionBuilder | Represents a FeatureRecognition Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateFeatureRecognitionBuilder Created in NX6.0.0 |
| FeatureTeaching | Represents a FeatureTeaching Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateFeatureTeaching Created in NX8.0.0 |
| FeedsBuilder | Represents a feeds Builder Created in NX5.0.0 |
| FeedsOptimizationData | Represents a NXOpen::CAM::FeedsOptimizationData |
| FeedsOptimizeBuilder | Represents a NXOpen::CAM::FeedsOptimizeBuilder a "commit" of this object will perform the Feed Rate Optimization |
| FeedStatusData | The data for CamUI_FeedStatusComp Created in NX5.0.0 |
| FeedsTurnBuilder | Represents a turning feeds Builder Created in NX5.0.0 |
| FeedsWedmBuilder | Represents a wedm feeds Builder Created in NX5.0.0 |
| FinishDwell | Represents a NXOpen::CAM::FinishDwell |
| FinishPassesBuilder | Represents a FinishPasses Builder This is an abstract class, and cannot be instantiated |
| FinishTurning | Represents a Turn Finishing operation To create or edit an instance of this class, use NXOpen::CAM::FinishTurningBuilder Created in NX7.5.0 |
| FinishTurningBuilder | Represents a FinishTurning Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateFinishTurningBuilder Created in NX6.0.0 |
| FirstPlunge | Represents the first plunge Created in NX6.0.0 |
| FlowBuilder | Represents a FlowBuilder Builder This is an abstract class and cannot be instantiated |
| FlowCutSteepContainment | Represents a Steep Containment Builder Created in NX7.5.0 |
| FollowCurveMoveBuilder | Represents the Follow Curve Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateFollowCurveMoveBuilder Default values |
| FollowGeometryMoveBuilder | Represents the Follow Geometry Move Builder This is an abstract class, and cannot be created |
| FollowPartMoveBuilder | Represents the Follow Part Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateFollowPartMoveBuilder Default values |
| FormEdgesBuilder | Represents a FormEdges Builder Created in NX6.0.0 |
| FormToolBuilder | Represents a Form tool builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateFormToolBuilder Created in NX5.0.0 |
| FusedDepositionToolBuilder | Represents a fused deposition tool To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateFusedDepositionTool Created in NX12.0.2 |
| GeneralPropertiesBuilder | Represents a NXOpen::CAM::GeneralPropertiesBuilder to be used for setting the name of a specified CAM object |
| GenericFeatureOperation | Represents a Generic Feature Operation To create or edit an instance of this class, use NXOpen::CAM::GenericFeatureOperationBuilder Created in NX12.0.1 |
| GenericFeatureOperationBuilder | Represents a GenericFeatureOperationBuilder Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateGenericFeatureOperationBuilder Created in NX12.0.1 |
| GenericMotionControl | Represents a Generic Motion Control operation To create or edit an instance of this class, use NXOpen::CAM::GmcOpBuilder Created in NX7.5.0 |
| GenericToolBuilder | Represents a Generic Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateGenericToolBuilder Created in NX5.0.0 |
| GenericTrackingBuilder | Represents a GenericTracking Builder To create a new instance of this class, use NXOpen::CAM::Tool::CreateGenericTrackingBuilder Created in NX5.0.0 |
| Geometry | Represents a CAM geometry object Created in NX8.0.0 |
| GeometryCiBuilder | Represents a geometry ci Builder Created in NX5.0.0 |
| GeometryGroup | Represents a CAM geometry builder for group level Created in NX8.0.0 |
| GeometrySet | Represents a geometry set for a CAM object |
| GeometrySetList | Represents a list of objects |
| GmcOpBuilder | Represents a GmcOp Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateGmcopBuilder Created in NX5.0.0 |
| GougeCheckBuilder | Represents a NXOpen::CAM::GougeCheckBuilder |
| GougeCheckResults | Represents the gouge results data Created in NX11.0.2 |
| GrooveMilling | Represents a Groove Milling Operation To create or edit an instance of this class, use NXOpen::CAM::GrooveMillingBuilder Created in NX9.0.0 |
| GrooveMillingBuilder | Represents a GrooveMillingBuilder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateGrooveMillingBuilder Created in NX9.0.0 |
| GrooveToolBuilder | Represents a Groove tool builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateGrooveToolBuilder Created in NX5.0.0 |
| GroupFeatures | Represents the group features command To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateGroupFeatures Default values |
| GuidedCurveBuilder | Represents a Guided Curve Drive Method Builder Created in NX11.0.1 |
| GuidedCurveCutOrder | Represents a guided curve cut order builder This is an abstract class and cannot be instantiated |
| GuidingCurvesCutDir | Represents a guiding curves cut dir type This is an abstract class and cannot be instantiated |
| HolderSectionBuilder | Represents a Holder Section Builder Created in NX5.0.0 |
| HoldingSystemBuilder | Represents a NXOpen::CAM::HoldingSystemBuilder This is an abstract class, and cannot be instantiated |
| HoldingSystemBuilderList | Represents a list of objects |
| HoleBossGeom | Represents a CAM geometry builder This is an abstract class and cannot be instantiated |
| HoleBossGeometry | Represents a CAM geometry builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateHoleBossGeometryBuilder Created in NX7.5.0 |
| HoleBossSet | Represents a Cut Area Geometry builder To create a new instance of this class, use NXOpen::CAM::HoleBossGeom::CreateHoleBossBuilder Created in NX7.5.0 |
| HoleBossSetList | Represents a list of objects |
| HoleDrilling | Represents a Hole Drilling Operation To create or edit an instance of this class, use NXOpen::CAM::HoleDrillingBuilder Created in NX9.0.1 |
| HoleDrillingBuilder | Represents a HoleDrillingBuilder Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateHoleDrillingBuilder Created in NX9.0.0 |
| HoleDrillingCutParameters | Represents a HoleDrillingCutParameters Builder Created in NX9.0.0 |
| HoleMachiningBuilder | Represents a HoleMachiningBuilder Builder This is an abstract class and cannot be instantiated |
| HoleMachiningCutParameters | Represents a HoleMachiningCutParameters Builder This is an abstract class and cannot be instantiated |
| HoleMaking | Represents a Hole Making operation To create or edit an instance of this class, use NXOpen::CAM::HoleMakingBuilder Created in NX7.5.0 |
| HoleMakingBuilder | Represents a HoleMaking Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateHoleMakingBuilder Created in NX5.0.0 |
| HubFinish | Represents a Hub Finish Drive Method Builder Created in NX7.5.0 |
| InferredDouble | Represents a builder for an inferred value in of a CAM.CAMObject Created in NX7.5.0 |
| Inheritable2dLength | Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX7.5.0 |
| InheritableBoolBuilder | Represents a builder for an inheritable integer value in of a CAM.CAMObject Created in NX8.5.3 |
| InheritableBuilder | Represents a builder for an inheritable value in of a CAM.CAMObject Created in NX6.0.0 |
| InheritableColorPickerBuilder | Represents an inheritable color picker Created in NX12.0.1 |
| InheritableDoubleBuilder | Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0 |
| InheritableFeedBuilder | Represents a builder for an inheritable feed value in of a CAM.CAMObject Created in NX5.0.0 |
| InheritableFeedModeBuilder | Represents a builder for an inheritable enum value in of a CAM.CAMObject Created in NX8.0.0 |
| InheritableIntBuilder | Represents a builder for an inheritable integer value in of a CAM.CAMObject Created in NX5.0.0 |
| InheritableTextBuilder | Represents a builder for an inheritable text value in of a CAM.CAMObject Created in NX5.0.0 |
| InheritableToolDepBuilder | Represents a builder for an inheritable tool dependent value in of a CAM.CAMObject Created in NX5.0.0 |
| InitialProfilePlunge | Represents the initial profile plunge Created in NX7.5.0 |
| InPathEventDataBuilder | Represents a InPath Event Data Builder To create a new instance of this class, use NXOpen::CAM::WedmCustomBoundaryDataBuilder::CreateInpathEventDataBuilder Created in NX5.0.0 |
| InPathEventDataBuilderList | Represents a list of objects |
| InPathEventSetData | Represents in path event This is a sub-builder class and cannot be directly instantiated Created in NX7.5.0 |
| InspectionAlignmentAssistantBuilder | Represents a CMM Inspection Alignment Assistant Builder, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is not stable |
| InspectionAlignmentBuilder | Represents a CMM Inspection Alignment builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionAlignmentBuilder Created in NX7.5.2 |
| InspectionAnalyzeBuilder | Inspection Analyze options dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionAnalyzeBuilder Created in NX8.5.0 |
| InspectionAnalyzeOutputBuilder | Inspection Analyze Output options dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionAnalyzeOutputBuilder Created in NX8.5.1 |
| InspectionArcFeatureBuilder | Represents a CMM Inspection Arc Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionArcFeatureBuilder Created in NX7.0.0 |
| InspectionAxisExtrapolationModeBuilder | Represents a builder for an inheritable axis extrapolation mode enum value Created in NX8.5.1 |
| InspectionCircleFeatureBuilder | Represents a CMM Inspection Circle Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionCircleFeatureBuilder Created in NX7.0.0 |
| InspectionCmmCommandBuilder | Represents a CMM Inspection miscellaneous command builder |
| InspectionCollisionAvoidanceBuilder | Collision Avoidance Dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionCollisionAvoidanceBuilder Created in NX8.0.0 |
| InspectionConeFeatureBuilder | Represents a CMM Inspection Cone Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionConeFeatureBuilder Created in NX7.0.0 |
| InspectionConstructedFeatureBuilder | Represents a CMM Inspection Constructed Feature Builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionConstructedFeatureBuilder Created in NX7.0.0 |
| InspectionCparlnFeatureBuilder | Represents a CMM Inspection Cparln Feature Builder |
| InspectionCreatePathsBuilder | Create Paths Dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionCreatePathsBuilder Created in NX7.0.0 |
| InspectionCurveFeatureBuilder | Represents a CMM Inspection Curve Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionCurveFeatureBuilder Created in NX7.0.0 |
| InspectionCylinderCircleFitModeBuilder | Represents a builder for an inheritable cylinder/circle fitting mode enum value Created in NX8.5.1 |
| InspectionCylinderFeatureBuilder | Represents a CMM Inspection Cylinder Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionCylinderFeatureBuilder Created in NX7.0.0 |
| InspectionDatumPlaneFittingModeBuilder | Represents a builder for an inheritable datum plane fitting mode enum value Created in NX8.5.1 |
| InspectionDeleteMeaPtsBuilder | Inspection Delete Analyze Points dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionDeleteMeaPtsBuilderSel Created in NX9.0.1 |
| InspectionDeltaMoveBuilder | Represents the builder for the CMM Inspection sub-operation Delta Move |
| InspectionEdgePointFeatureBuilder | Represents a CMM Inspection Edge Point Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionEdgePointFeatureBuilder Created in NX9.0.0 |
| InspectionGraphicalReportBuilder | Represents the builder for the CMM Inspection Graphical Report Operation To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateGraphicalReportBuilder Created in NX10.0.3 |
| InspectionGraphicalReportOutputBuilder | Represents the builder for Inspection Graphical Report Output |
| InspectionGraphicalVariableBuilder | Represents the builder for the CMM Inspection Graphical Report Variable |
| InspectionGraphicalVariableBuilderList | Represents a list of objects |
| InspectionGroup | Represents a group for CMM Inspection To obtain an instance of this class us NXOpen::CAM::InspectionGroupCollection Created in NX7.0.0 |
| InspectionGroupCollection | Represents the group collection for CMM Inspection To obtain an instance of this class, refer to NXOpen::CAM::InspectionSetup Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InspectionImportDmisBuilder | Inspection Import Dmis dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateImportDmisBuilder Created in NX11.0.1 |
| InspectionLimitsOfSizeModeBuilder | Represents a builder for an inheritable limits of size mode enum value Created in NX8.5.1 |
| InspectionLinear5axisMoveToPointBuilder | Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point |
| InspectionLinearMoveToPointBuilder | Represents the builder for the CMM Inspection sub-operation Linear Move To Point |
| InspectionLineFeatureBuilder | Represents a CMM Inspection Line Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionLineFeatureBuilder Created in NX7.0.0 |
| InspectionLinkPmiBuilder | Create Link PMI Dialog Builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionLinkPmiBuilder Created in NX7.0.0 |
| InspectionMeasDataBuilder | Inspection Measured Data dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionMeasDataBuilder Created in NX8.5.0 |
| InspectionMeasurePointBuilder | Represents the builder for the CMM Inspection sub-operation Measure Point |
| InspectionMethodBuilder | Represents the builder for a CMM Inspection method |
| InspectionMoveBuilder | Represents CMM Inspection Move Builder This cannot be instantiated Created in NX7.0.0 |
| InspectionMoveCollection | Represents the Inspection move collection To obtain an instance of this class, refer to NXOpen::CAM::InspectionOperation Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InspectionMoveSubop | Represents CMM Inspection Move To obtain an instance of this class use NXOpen::CAM::InspectionMoveCollection Created in NX7.0.0 |
| InspectionMoveSubopCollection | Represents the Inspection move collection contained by point set subops To obtain an instance of this class, refer to NXOpen::CAM::InspectionMoveSubop Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InspectionOperation | Represents an Inspection operation To obtain an instance of this class use NXOpen::CAM::InspectionOperationCollection Created in NX7.0.0 |
| InspectionOperationCollection | Represents the CMM Inspection operation collection To obtain an instance of this class, refer to NXOpen::CAM::InspectionSetup Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InspectionOperationTransformBuilder | Create transformed inspection operations, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is not stable |
| InspectionOutputOperationBuilder | This class creates the output operation To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionOutputOperationBuilder Created in NX7.0.0 |
| InspectionParplnFeatureBuilder | Represents a CMM Inspection Parpln Feature Builder |
| InspectionPathBuilder | Represents the builder for a CMM Inspection path |
| InspectionPathPointBuilder | Represents an inspection path point builder Created in NX8.5.0 |
| InspectionPatternFeatureBuilder | Represents a CMM Inspection Pattern Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionPatternFeatureBuilder Created in NX7.0.0 |
| InspectionPlaneFeatureBuilder | Represents a CMM Inspection Plane Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionPlaneFeatureBuilder Created in NX7.0.0 |
| InspectionPointFeatureBuilder | Represents a CMM Inspection Point Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionPointFeatureBuilder Created in NX7.0.0 |
| InspectionPolarGridBuilder | Represents the builder for the CMM Inspection Polar Grid sub-operation |
| InspectionProbeTipTypeBuilder | Represents a builder for an inheritable probe tip type value Created in NX9.0.1 |
| InspectionProbeToolBuilder | Represents an Inspection Probe Tool Builder To create a new instance of this class, use NXOpen::CAM::InspectionGroupCollection::CreateInspectionProbeToolBuilder Created in NX9.0.0 |
| InspectionProbeTrackingBuilder | Represents a InspectionProbeTracking builder To create a new instance of this class, use NXOpen::CAM::InspectionTool::CreateInspectionProbeTrackingBuilder Created in NX9.0.0 |
| InspectionProfileDispositionModeBuilder | Represents a builder for an inheritable profile disposition mode enum value Created in NX8.5.1 |
| InspectionReferenceFeatureModeBuilder | Represents a builder for an inheritable reference feature mode enum value Created in NX9.0.0 |
| InspectionSaveToLayerBuilder | Inspection Analyze Save to Layer dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionSaveToLayerBuilderSel Created in NX9.0.1 |
| InspectionScanArcBuilder | Represents the builder for the CMM Inspection sub-operation Scan Arc |
| InspectionScanCurve5AxisBuilder | Represents the builder for the CMM Inspection sub-operation Scan Curve |
| InspectionScanCurveBuilder | Represents the builder for the CMM Inspection sub-operation Scan Curve |
| InspectionScanHelixBuilder | Represents the builder for the CMM Inspection sub-operation Scan Helix |
| InspectionScanLineBuilder | Represents the builder for the CMM Inspection sub-operation Scan Line |
| InspectionSensorBuilder | Represents the builder for a CMM Inspection Sensor |
| InspectionSensorMassEditBuilder | Edit Multiple Subops Dialog builder To create a new instance of this class, use NXOpen::CAM::InspectionMoveCollection::CreateInspectionSensorMassEditBuilder Created in NX7.5.3 |
| InspectionSensorStrategyBuilder | Represents a builder for an inheritable sensor strategy enum value Created in NX9.0.0 |
| InspectionSetup | Inspection setup Use the Part class to get or create an inspection setup Created in NX7.0.0 |
| InspectionSphereFeatureBuilder | Represents a CMM inspection sphere feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionSphereFeatureBuilder Created in NX7.0.0 |
| InspectionSurfaceFeatureBuilder | Represents a CMM Inspection Curve Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionSurfaceFeatureBuilder Created in NX7.0.0 |
| InspectionSurfaceProfileModeBuilder | Represents a builder for an inheritable datum plane fitting mode enum value Created in NX8.5.1 |
| InspectionToleranceOperationBuilder | This class creates the tolerance operation To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionToleranceOperationBuilder Created in NX7.0.0 |
| InspectionTool | Represents an Inspection group To obtain an instance of this class use NXOpen::CAM::InspectionGroupCollection Created in NX7.0.0 |
| InspectionTorusFeatureBuilder | Represents a CMM Inspection Torus Feature builder To create a new instance of this class, use NXOpen::CAM::InspectionOperationCollection::CreateInspectionTorusFeatureBuilder Created in NX7.0.0 |
| InspectionTrackPointCollection | Represents the inspection track point collection To obtain an instance of this class, refer to NXOpen::CAM::InspectionTool Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InspectionUVGridBuilder | Represents the builder for the CMM Inspection UV Grid sub-operation |
| InterpolateAngle | Represents builder of Interpolate Angle, one option of Tool Axis Created in NX7.5.0 |
| InterpolateVector | Represents builder of Interpolate Vector, one option of Tool Axis Created in NX7.5.0 |
| IntStatusData | The data for CamUI_IntStatusComp Created in NX5.0.0 |
| IpwAnalysisBuilder | Represents a NXOpen::CAM::IpwAnalysisBuilder This is an abstract class, and cannot be instantiated |
| IpwContainmentCurvesBuilder | Represents a NXOpen::CAM::IpwContainmentCurvesBuilder This is an abstract class, and cannot be instantiated |
| LaserCircleCutout | Represents a LaserCircleCutout To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateLaserCircleCutout Created in NX9.0.0 |
| LaserControlPoint | Represents a Laser Control Point builder To create a new instance of this class, use NXOpen::CAM::LaserProfileMove::CreateControlPoint Created in NX9.0.0 |
| LaserControlPointList | Represents a list of objects |
| LaserCutDirection | Represents cut direction settings for laser move Created in NX9.0.0 |
| LaserCutoutDefinition | Represents cutout definition settings for laser move Created in NX9.0.0 |
| LaserHeadOrientation | Represents head orientation settings for laser sub move Created in NX9.0.0 |
| LaserHexagonCutout | Represents a LaserHexagonCutout To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateLaserHexagonCutout Created in NX9.0.0 |
| LaserLinearMove | Represents a LaserLinearMove To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateLaserLinearMove Created in NX9.0.0 |
| LaserMethod | Represents a Laser Method To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateLaserMethod Created in NX9.0.0 |
| LaserPiercingPoint | Represents piercing point settings for laser move Created in NX9.0.0 |
| LaserProfileMove | Represents a LaserProfileMove To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateLaserProfileMove Created in NX9.0.0 |
| LaserRectangleCutout | Represents a LaserRectangleCutout To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateLaserRectangleCutout Created in NX9.0.0 |
| LaserSlotCutout | Represents a LaserSlotCutout To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateLaserSlotCutout Created in NX9.0.0 |
| LaserTeachMode | Represents a Laser TeachMode To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateLaserTeachMode Created in NX9.0.0 |
| LaserTool | Represents a Laser Tool To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateLaserTool Created in NX9.0.0 |
| LatheMachineControl | Represents a Lathe Machine Control operation To create or edit an instance of this class, use NXOpen::CAM::LatheMachineControlBuilder Created in NX7.5.0 |
| LatheMachineControlBuilder | Represents a LatheMachineControl Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateLatheMachineControlBuilder Created in NX5.0.0 |
| LatheUserDefined | Represents a Lathe User Defined operation To create or edit an instance of this class, use NXOpen::CAM::LatheUserDefinedBuilder Created in NX7.5.0 |
| LatheUserDefinedBuilder | Represents a LatheUserDefined Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateLatheUserDefinedBuilder Created in NX5.0.0 |
| LayoutCiBuilder | Represents a layout ci Builder Created in NX5.0.0 |
| LeadAngles | Represents a lead angles Created in NX8.5.0 |
| LevelToLevel | Represents a NXOpen::CAM::LevelToLevel Created in NX6.0.0 |
| LinearLocalCsysMoveBuilder | Represents the linear local CSYS move builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateLinearLocalCsysMoveBuilder Created in NX12.0.1 |
| LowerLimit | Represents a NXOpen::CAM::LowerLimit |
| MachineGroupBuilder | Represents a MachineGroup Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMachineGroupBuilder Created in NX5.0.0 |
| MachineHeadGroupBuilder | Represents a MachineHeadGroup Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMachineHeadGroupBuilder Created in NX5.0.0 |
| MachinePocketGroupBuilder | Represents a MachinePocketGroup Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMachinePocketGroupBuilder Created in NX5.0.0 |
| MachineTurretGroupBuilder | Represents a MachineTurretGroup Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMachineTurretGroupBuilder Created in NX5.0.0 |
| MachiningFeature | Represents a NXOpen::CAM::CAMFeature builder To obtain an instance of this class use NXOpen::CAM::FeatureRecognitionBuilder Created in NX8.0.0 |
| MachiningFeatureGeom | This class represent the builder for machining feature geometry |
| MachiningRegionBuilder | Represents a Machining Region Builder Created in NX11.0.1 |
| ManageToolPartBuilder | Represents an Export Tool Part Builder This is an abstract class, and cannot be instantiated |
| ManualControl | Represents a ManualControl operation To create or edit an instance of this class, use NXOpen::CAM::ManualControlBuilder Created in NX10.0.3 |
| ManualControlBuilder | Represents a ManualControl Operation Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateManualControlBuilder Created in NX10.0.3 |
| ManualFeatureBuilder | Represents a NXOpen::CAM::ManualFeatureBuilder To obtain an instance of this class use NXOpen::CAM::FeatureRecognitionBuilder Created in NX6.0.0 |
| ManualFeatureBuilderList | Represents a list of objects |
| ManualMove | Represents Manual Move To obtain an instance of this class us NXOpen::CAM::OperationCollection Created in NX4.0.0 |
| MaxCutTraverse | Represents a NXOpen::CAM::MaxCutTraverse |
| MergeSubopCommand | Represents an Merge Subop Command Builder Created in NX9.0.0 |
| Method | Represents a Method Group To create or edit an instance of this class, use NXOpen::CAM::MethodBuilder Created in NX7.5.0 |
| MethodBuilder | Represents a Method Builder This is an abstract class, and cannot be instantiated |
| MillAreaGeomBuilder | Represents a MillAreaGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillAreaGeomBuilder Created in NX5.0.0 |
| MillBoundaryGeomBuilder | Represents a MillBoundaryGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillBoundaryGeomBuilder Created in NX5.0.0 |
| MillCutParameters | Represents a NXOpen::CAM::MillCutParameters |
| MillFormToolBuilder | Represents a MillForm Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillFormToolBuilder Created in NX5.0.0 |
| MillGeomBuilder | Represents a MillGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillGeomBuilder Created in NX5.0.0 |
| MillingToolBuilder | Represents a MillingTool Builder This is an abstract class, and cannot be instantiated |
| MillingTrackpointBuilder | Represents a Milling Trackpoint Builder Created in NX6.0.0 |
| MillMachineControl | Represents a Mill Machine Control operation To create or edit an instance of this class, use NXOpen::CAM::MillMachineControlBuilder Created in NX7.5.0 |
| MillMachineControlBuilder | Represents a MillMachineControl Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateMillMachineControlBuilder Created in NX5.0.0 |
| MillMethodBuilder | Represents a Mill Method Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillMethodBuilder Created in NX5.0.0 |
| MillOperation | Represents a Mill operation To create or edit an instance of this class, use NXOpen::CAM::MillOperationBuilder Created in NX7.5.0 |
| MillOperationBuilder | Represents a MillOperation Builder This is an abstract class and cannot be instantiated |
| MillOrientGeomBuilder | Represents a MillOrientGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillOrientGeomBuilder Created in NX5.0.0 |
| MillTextGeomBuilder | Represents a MillTextGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillTextGeomBuilder Created in NX5.0.0 |
| MillToolBuilder | Represents a Mill Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillToolBuilder Created in NX5.0.0 |
| MillToolProbing | Represents a Mill Tool operation To create or edit an instance of this class, use NXOpen::CAM::MillToolProbingBuilder Created in NX8.5.1 |
| MillToolProbingBuilder | Represents a Mill Tool Probing Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateMillToolProbingBuilder Created in NX8.5.1 |
| MillUserDefined | Represents a Mill User Defined operation To create or edit an instance of this class, use NXOpen::CAM::MillUserDefinedBuilder Created in NX7.5.0 |
| MillUserDefinedBuilder | Represents a MillUserDefined Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateMillUserDefinedBuilder Created in NX5.0.0 |
| MillVolumeGeomBuilder | Represents a MillVolumeGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMillVolumeGeomBuilder Created in NX5.0.0 |
| MinCutDepth | Represents a NXOpen::CAM::MinCutDepth |
| MinCutLength | Represents a NXOpen::CAM::MinCutLength |
| MinCutVolume | Represents a NXOpen::CAM::MinCutVolume |
| MirrorBuilder | Represents a Mirror Builder |
| Move | Represents a Move To obtain an instance of this class use NXOpen::CAM::MoveCollection Created in NX5.0.0 |
| MoveBuilder | Represents Move Builder This cannot be instantiated Created in NX5.0.0 |
| MoveCollection | Represents the move collection To obtain an instance of this class, refer to NXOpen::CAM::Operation Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MoveToPointBuilder | Represents the Move To Point Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateMoveToPointBuilder Created in NX5.0.0 |
| MultiBladeBaseGeometry | Represents a selectoin geometry Builder This is an abstract class and cannot be instantiated |
| MultiBladeGeomBuilder | Represents a MultiBladeGeomBuilder Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMultiBladeGeometryBuilder Created in NX7.0.0 |
| MultiBladeSplittersGeometry | Represents a selectoin list geometry Builder This is an abstract class and cannot be instantiated |
| MultiDepthCut | Represents a NXOpen::CAM::MultiDepthCut Created in NX6.0.0 |
| MultipleBaseFaceGeometry | Represents a (face/sheet body) geometry builder |
| MultiplePassesBuilder | Represents a MultiplePassesBuilder Created in NX6.0.0 |
| MultipleStepoverBuilder | Represents a Builder which holds the data for a set of individual number of passes and stepover distance |
| MultiRamp | Represents a NXOpen::CAM::MultiRamp |
| MultiToolBuilder | Represents a MultiTool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateMultiToolBuilder Created in NX11.0.1 |
| MultiToolExport | Represents Multi-Tool Export Builder Created in NX12.0.1 |
| NCAssistantBuilder | Represents a NCAssistant Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateNCAssistantBuilder Default values |
| NCGroup | Represents a NC group To obtain an instance of this class use NXOpen::CAM::NCGroupCollection Created in NX4.0.0 |
| NCGroupBuilder | Represents a NCGroup Builder This is an abstract class, and cannot be instantiated |
| NCGroupCollection | Represents the ncgroup collection To obtain an instance of this class, refer to NXOpen::CAM::CAMSetup Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| NcmAvoidancePointBuilder | Represents a NXOpen::CAM::NcmAvoidancePointBuilder |
| NcmClearanceBuilder | Represents a NXOpen::CAM::NcmClearanceBuilder |
| NcmctPartMountingBuilder | Represents a NXOpen::CAM::NcmctPartMountingBuilder a "commit" of this object will perform the Part Mounting and no object is returned |
| NcmEngRetBuilder | Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX9.0.3 |
| NcmHoleDrilling | Represents a NXOpen::CAM::NcmHoleDrilling |
| NcmHoleMachining | Represents a NXOpen::CAM::NcmHoleMachining |
| NcmHoleMachiningEngRet | Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX7.5.0 |
| NcmLaserEngage | Represents Engage settings for laser non cutting moves Created in NX9.0.0 |
| NcmLaserRetract | Represents Retract settings for laser non cutting moves Created in NX9.0.0 |
| NcmOptimizeGroup | Represents a CAM::NcmOptimizeGroup |
| NcmPlanarBuilder | Represents a NXOpen::CAM::NcmPlanarBuilder |
| NcmPlanarEngRetBuilder | Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0 |
| NcmScBuilder | Represents a NXOpen::CAM::NcmScBuilder |
| NcmScEngRetBuilder | Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0 |
| NcmSmoothingBuilder | Represents a NXOpen::CAM::NcmSmoothingBuilder |
| NcmSubopBuilder | Represents a NXOpen::CAM::NcmSubopBuilder |
| NcmTransfer | Represents a NXOpen::CAM::NcmTransfer |
| NcmTransferBuilder | Represents a NXOpen::CAM::NcmTransferBuilder |
| NcmTransferTypes | Represents a CAM::NcmTransferTypes |
| NcmTurningBuilder | Represents a CAM.NcmTurningBuilder Created in NX6.0.0 |
| NcmTurnRoughBuilder | Represents a CAM.NcmTurnRoughBuilder Created in NX6.0.0 |
| NcmTurnRoughFinishBuilder | Represents a CAM.NcmTurnRoughFinishBuilder Created in NX6.0.0 |
| NcmTurnThreadBuilder | Represents a CAM.NcmTurnThreadBuilder Created in NX6.0.0 |
| NcmWedmBuilder | Represents a CAM.NcmWedmBuilder Created in NX7.5.0 |
| NormalToToolAxisMoveBuilder | Represents the Move To Point Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateNormalToToolAxisMoveBuilder Created in NX5.0.0 |
| Notes | Represents notes Created in NX9.0.0 |
| ObjectNotes | Represents an Object Notes To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateObjectNotes Created in NX9.0.0 |
| ObjectsFeedsBuilder | Represents an Object Action Feeds Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateFeedsBuilder Created in NX6.0.0 |
| ObjectsUdeSet | Represents an Object Action Ude Set Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateObjectsUdeSet Created in NX6.0.0 |
| ObjectWorkInstructionBuilder | Represents an Object Work Instruction To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateObjectWorkInstructionBuilder Created in NX9.0.3 |
| OffsetDataBuilder | Represents the Offset Point Data Builder Created in NX6.0.0 |
| Operation | Represents an operation To create or edit an instance of this class, use NXOpen::CAM::OperationBuilder Created in NX4.0.0 |
| OperationBuilder | Represents a Opr Builder This is an abstract class, and cannot be instantiated |
| OperationCollection | Represents the operation collection To obtain an instance of this class, refer to NXOpen::CAM::CAMSetup Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| OperationDisplayOptionsBuilder | Represents a display options Builder This is an abstract class and cannot be instantiated |
| OperationTeaching | Represents a OperationTeaching Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateOperationTeaching Created in NX8.0.0 |
| OperationTransformBuilder | OperationTransformBuilder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateOperationTransformBuilder Created in NX6.0.0 |
| OppositeDirection | Represents OppositeDirection Created in NX8.5.0 |
| OptimizeFeatureGeometry | Represents an optimize feature geometry builder This is an abstract class and cannot be instantiated |
| OptimizeTraverseGroupBuilder | Represents a OptimizeTraverseGroup Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateOptimizeTraverseGroupBuilder Created in NX5.0.0 |
| OrientGeomBuilder | Represents a OrientGeom Builder This is an abstract class, and cannot be instantiated |
| OrientGeometry | Represents a Orient Group To create or edit an instance of this class, use NXOpen::CAM::OrientGeomBuilder Created in NX7.5.0 |
| OutputUncutRegions | Represents a NXOpen::CAM::OutputUncutRegions |
| ParamBuilder | Represents a manufacturing object builder |
| PartAxisBuilder | Represents a part axis builder |
| Path | Represets a Cam Tool Path This is a Subobject and cannot be publicly instantiated |
| PathCircularMotion | This class represents the data of a Linear Motion Created in NX10.0.1 |
| PathContactMotion | This class represents the data of a Linear Motion Created in NX11.0.2 |
| PathDisplay | Represents a class that is used for NX testing |
| PathDisplayColors | Represents a path display colors Builder This is an abstract class and cannot be instantiated |
| PathEvent | Represets a Cam Tool Path Event This is a Subobject and cannot be publicly instantiated |
| PathHelixMotion | This class represents the data of a Linear Motion Created in NX10.0.1 |
| PathLaserDepositionData | Definition for Laser deposition data Created in NX9.0.3 |
| PathLaserGeometryData | Definition for Laser geometry data Created in NX9.0.3 |
| PathLaserMachineData | Definition for Laser machine data Created in NX9.0.3 |
| PathLaserOptimizationData | Definition for Laser optimization data Created in NX9.0.3 |
| PathLaserPowderData | Definition for Laser powder data Created in NX9.0.3 |
| PathLaserProcessorData | Definition for Laser processor data Created in NX9.0.3 |
| PathLevelMarker | This class represents the data of a Linear Motion Created in NX10.0.3 |
| PathLinearMotion | This class represents the data of a Linear Motion Created in NX10.0.1 |
| PathMarker | This class represents the data of a path marker Created in NX12.0.1 |
| PatternMarker | This class represents the data of a pattern marker Created in NX12.0.1 |
| PatternTypeBuilder | Represents a Guided Curve pattern type builder This is an abstract class and cannot be instantiated |
| PitchSetting | Represents a NXOpen::CAM::PitchSetting |
| PlanarMilling | Represents a Planar Milling Operation To create or edit an instance of this class, use NXOpen::CAM::PlanarMillingBuilder Created in NX7.5.0 |
| PlanarMillingBuilder | Represents a PlanarMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreatePlanarMillingBuilder Created in NX5.0.0 |
| PlanarOperation | Represents a Planar operation To create or edit an instance of this class, use NXOpen::CAM::PlanarOperationBuilder Created in NX7.5.0 |
| PlanarOperationBuilder | Represents a PlanarOperation Builder This is an abstract class and cannot be instantiated |
| PlungeMilling | Represents a Plunge Milling Operation To create or edit an instance of this class, use NXOpen::CAM::PlungeMillingBuilder Created in NX7.5.0 |
| PlungeMillingBuilder | Represents a PlungeMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreatePlungeMillingBuilder Created in NX5.0.0 |
| PmopToolAxisCiBuilder | Represents a PmopToolAxisCiBuilder This is an abstract class, and cannot be instantiated |
| PointToPointBuilder | Represents a Point to Point Builder (Drilling) To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreatePointToPointBuilder Created in NX5.0.0 |
| PostDebugBuilder | Represents a CAM::PostDebugBuilder Use the PostDebugBuilder class to create a PostDebugBuilder object |
| PostEventsCiBuilder | Represents a PostEventsCiBuilder Created in NX5.0.1 |
| Preferences | Represents a cam preferences Builder To create a new instance of this class, use NXOpen::CAM::CAMSession::CreateCamPreferences Created in NX7.5.0 |
| PreprocessGeometryBuilder | Represents a Preprocess Geometry Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreatePreprocessGeometryBuilder Created in NX6.0.0 |
| ProbeCalibrateLengthMoveBuilder | Represents the Probe Calibrate Length Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateProbeCalibrateLengthMoveBuilder Created in NX5.0.0 |
| ProbeCalibrateSphereMoveBuilder | Represents the Probe Calibrate Sphere Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateProbeCalibrateSphereMoveBuilder Created in NX5.0.0 |
| ProbeCalibrateStylusMoveBuilder | Represents the Probe Calibrate Stylus Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateProbeCalibrateStylusMoveBuilder Created in NX5.0.0 |
| ProbeClearanceMoveBuilder | Represents the Probe Clearance Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateProbeClearanceMoveBuilder Created in NX5.0.0 |
| ProbeControlParametersBuilder | Represents a NXOpen::CAM::ProbeControlParametersBuilder |
| ProbeInspectBorebossMoveBuilder | Represents the Probe Inspect Bore Boss Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateProbeInspectBorebossMoveBuilder Created in NX5.0.0 |
| ProbeInspectPointMoveBuilder | Represents the Probe Inspect Point Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateProbeInspectPointMoveBuilder Created in NX5.0.0 |
| ProbeInspectSurfacePointMoveBuilder | Represents the Probe Inspect Surface Point Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateProbeInspectSurfacePointMoveBuilder Created in NX5.0.0 |
| ProbeOutputControl | Represents a NXOpen::CAM::ProbeOutputControl |
| ProbeParamsBuilder | Represents the Probe Params Builder This builder cannot be instantiated separately |
| ProbeProtectedParametersBuilder | Represents the Probe Protected Parameters Builder Created in NX5.0.0 |
| ProbeStockParametersBuilder | Represents the Probe Stock Parameters Builder Created in NX5.0.0 |
| ProbeToleranceParametersBuilder | Represents a NXOpen::CAM::ProbeToleranceParametersBuilder |
| ProbeToolBuilder | Represents a Probe Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateProbeToolBuilder Created in NX5.0.0 |
| ProbeTrackingBuilder | Represents a ProbeTracking Builder To create a new instance of this class, use NXOpen::CAM::Tool::CreateProbeTrackingBuilder Created in NX5.0.0 |
| ProbeTrackPoint | Represents an Track Point To obtain an instance of this class us NXOpen::CAM::TrackPointCollection Created in NX4.0.0 |
| ProfileStrategy | Represents profile strategy Created in NX6.0.0 |
| Program | Represents a program group To obtain an instance of this class use NXOpen::CAM::NCGroupCollection Created in NX12.0.1 |
| ProgramOrderGroupBuilder | Represents a ProgramOrderGroup Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateProgramOrderGroupBuilder Created in NX5.0.0 |
| ProjVecCiBuilder | Represents a tool axis ci Builder Created in NX5.0.0 |
| RadialGrooveMilling | Represents a Radial Groove Milling Operation To create or edit an instance of this class, use NXOpen::CAM::RadialGrooveMillingBuilder Created in NX9.0.3 |
| RadialGrooveMillingBuilder | Represents a RadialGrooveMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateRadialGrooveMillingBuilder Created in NX9.0.3 |
| RampingMode | Represents a ramping mode Builder Created in NX6.0.0 |
| ReferencePoint | Represents reference point Created in NX12.0.1 |
| ReferenceVector | Represents reference Vector Created in NX12.0.1 |
| RegionMarker | This class represents the data of a region marker Created in NX12.0.1 |
| ReliefCut | Represents the relief cut Created in NX7.5.0 |
| ReliefPlunge | Represents a NXOpen::CAM::ReliefPlunge |
| RotaryFinishGeomBuilder | Represents a rotary finish geometry builder |
| RotaryPointMoveBuilder | Rotary Move To Point Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateRotaryPointMoveBuilder Created in NX5.0.0 |
| RotaryPolarMoveBuilder | Represents the Rotary Polar Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateRotaryPolarMoveBuilder Created in NX5.0.0 |
| RotateToolMoveBuilder | Represents the Rotate Tool Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateRotateToolMoveBuilder Created in NX5.0.0 |
| RoughFinishTurning | Represents a Turn Rough Finish operation To create or edit an instance of this class, use NXOpen::CAM::RoughFinishTurningBuilder Created in NX7.5.0 |
| RoughFinishTurningBuilder | Represents a RoughFinishTurning Builder This is an abstract class and cannot be instantiated |
| RoughTurning | Represents a Turn Rough operation To create or edit an instance of this class, use NXOpen::CAM::RoughTurningBuilder Created in NX7.5.0 |
| RoughTurningBuilder | Represents a RoughTurning Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateRoughTurningBuilder Created in NX6.0.0 |
| RoundPointBuilder | Represents the round Point Builder Created in NX5.0.0 |
| SelectCAMFeature | Represents a single object selection |
| SelectCAMFeatureList | Represents a list of objects on a selection list |
| Sequence | Represents Sequence Builder Created in NX7.5.0 |
| SimulationOptionsBuilder | Represents a NXOpen::CAM::SimulationOptionsBuilder To create a new instance of this class, use NXOpen::SIM::KinematicConfigurator::CreateSimulationOptionsBuilder Created in NX6.0.0 |
| SmallAreaAvoidance | Represents a SmallArea Builder Created in NX6.0.0 |
| SoftTool | Represents a SoftTool This is an abstract class, and cannot be instantiated |
| SolidToolBuilder | Represents a SolidTool Builder This is an abstract class, and cannot be instantiated |
| SolidTrackingBuilder | Represents a SolidTracking Builder To create a new instance of this class, use NXOpen::CAM::Tool::CreateSolidTrackingBuilder Created in NX5.0.0 |
| SolidTrackPoint | Represents an Track Point To obtain an instance of this class us NXOpen::CAM::TrackPointCollection Created in NX4.0.0 |
| SplitSubopCommand | Represents an Split Subop Command Builder This cannot be instantiated Created in NX9.0.0 |
| Splitter | Represents a Splitter Builder To create a new instance of this class, use NXOpen::CAM::MultiBladeSplittersGeometry::CreateSplitter Created in NX7.0.0 |
| SplitterList | Represents a list of objects |
| SpringPasses | Represents a spring passes Created in NX6.0.0 |
| SpunOutlineGeom | Represents a spun outline geometry object for turning boundary Created in NX8.0.0 |
| SteepContainment | Represents a NXOpen::CAM::SteepContainment |
| StepoverBuilder | Represents a Stepover Builder Created in NX6.0.0 |
| StepParamsBuilder | Represents a StepParams Builder Created in NX5.0.0 |
| StepUpBuilder | Represents a StepUp Builder Created in NX6.0.0 |
| StockPerPassBuilder | Represents a Builder which holds the data for a set of individual stock per pass |
| StopPosition | Represents a stop position Created in NX6.0.0 |
| StringList | Represents a string list Created in NX11.0.2 |
| SurfaceContour | Represents a Surface Contour operation To create or edit an instance of this class, use NXOpen::CAM::SurfaceContourBuilder Created in NX7.5.0 |
| SurfaceContourBuilder | Represents a SurfaceContour Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateSurfaceContourBuilder Created in NX5.0.0 |
| SurfaceDriveGeometry | Represents a CAM drive geometry object for surface area Created in NX8.0.0 |
| SurfaceDriveGeometrySet | Represents a geometry set for a CAM object |
| SurfaceDriveGeometrySetList | Represents a list of objects |
| SurfaceRegions | Represents a Surface Regions Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateSurfaceRegions Created in NX8.0.0 |
| TabPointDataBuilder | Represents a Tab Point Builder To create a new instance of this class, use NXOpen::CAM::WedmCustomBoundaryDataBuilder::CreateTabPointDataBuilder Created in NX5.0.0 |
| TabPointDataBuilderList | Represents a list of objects |
| Teaching | Represents a Teaching Builder Abstract Created in NX10.0.3 |
| TeachmodeEngageSettingsBuilder | Represents a TeachmodeEngageSettingsBuilder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0 |
| TeachmodeLinearMoveBuilder | Represents a TeachmodeLinearMove To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0 |
| TeachmodeProfileMoveBuilder | Represents a TeachmodeProfileMoveBuilder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0 |
| TeachmodeRetractSettingsBuilder | Represents a TeachmodeRetractSettings builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0 |
| TeachmodeTurning | Represents a Turning Teachmode operation To create or edit an instance of this class, use NXOpen::CAM::TeachmodeTurningBuilder Created in NX7.5.0 |
| TeachmodeTurningBuilder | Represents a TeachmodeTurningBuilder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0 |
| ThreadCutParameters | Represents a NXOpen::CAM::ThreadCutParameters |
| ThreadedBossSet | Represents a thread boss Geometry builder To create a new instance of this class, use NXOpen::CAM::HoleBossGeom::CreateThreadedBossBuilder Created in NX7.5.0 |
| ThreadedBossSetList | Represents a list of objects |
| ThreadedHoleSet | Represents a Cut Area Geometry builder To create a new instance of this class, use NXOpen::CAM::HoleBossGeom::CreateThreadedHoleBuilder Created in NX7.5.0 |
| ThreadedHoleSetList | Represents a list of objects |
| ThreadMilling | Represents a Thread Milling Operation To create or edit an instance of this class, use NXOpen::CAM::ThreadMillingBuilder Created in NX7.5.0 |
| ThreadMillingBuilder | Represents a ThreadMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateThreadMillingBuilder Created in NX7.5.0 |
| ThreadMillingCutParameters | Represents a ThreadMillingCutParameters Builder Created in NX7.5.0 |
| ThreadToolBuilder | Represents a Thread tool builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateThreadToolBuilder Created in NX5.0.0 |
| ThreadTurning | Represents a Thread Turning operation To create or edit an instance of this class, use NXOpen::CAM::ThreadTurningBuilder Created in NX7.5.0 |
| ThreadTurningBuilder | Represents a ThreadTurning Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateThreadTurningBuilder Created in NX6.0.0 |
| Tool | Represents a NC group To obtain an instance of this class use NXOpen::CAM::NCGroupCollection Created in NX5.0.0 |
| ToolAxisAdvanced | Represents a Tool Axis Advanced Builder Created in NX7.0.0 |
| ToolAxisBase | Represents a tool axis ci Builder Created in NX7.5.0 |
| ToolAxisChange | Represents a NXOpen::CAM::ToolAxisChange |
| ToolAxisCiBuilder | Represents a tool axis ci Builder Created in NX5.0.0 |
| ToolAxisFilterBuilder | Represents a ToolAxisFilter Builder Created in NX1847.0.0 |
| ToolAxisFixed | Represents a Tool Axis Fixed Builder Created in NX7.5.0 |
| ToolAxisInterpolate | Represents a Tool Axis Interpolate Builder Created in NX7.5.0 |
| ToolAxisTilt | Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX6.0.0 |
| ToolAxisVariable | Represents a Tool Axis Variable Builder Created in NX7.5.0 |
| ToolBuilder | Represents a Tool Builder This is an abstract class, and cannot be instantiated |
| ToolChangeCiBuilder | Represents a ToolChangeCiBuilder Created in NX5.0.0 |
| ToolPathDivideBuilder | Represents a Tool Path Divide Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateToolPathDivideBuilder Created in NX5.0.0 |
| ToolPathEditorBuilder | Represents a Tool Path Editor Builder To create a new instance of this class, use NXOpen::CAM::Operation::CreateToolPathEditorBuilder Default values |
| ToolPathSplitBuilder | Represents a Tool Path Split Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateToolPathSplitBuilder Created in NX6.0.0 |
| ToolPathSplitItemBuilder | Represents a ToolPathSplitItem builder Use the NXOpen::CAM::ToolPathSplitBuilder class to create a ToolPathSplitItemBuilder object |
| ToolPathSplitItemBuilderList | Represents a list of objects |
| ToolPathSplitParametersBuilder | Represents the Divide Parameters This object is owned by another builder |
| ToolPathTiltAvoidance | Represents a Tool Path Tilt Avoidance Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| ToolPathTiltBuilder | Represents a Tool Path Tilt Builder To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateToolPathTiltBuilder Created in NX7.5.2 |
| ToolPathTiltClearance | Represents a Tool Path Tilt Clearance Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| ToolPathTiltMachine | Represents a Tool Path Tilt Machine Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| ToolPathTiltTilting | Represents a Tool Path Tilt Tilting Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| ToolPositioningBuilder | Represents the Tool Positioning Builder Created in NX8.0.0 |
| ToolTrackingPointBuilder | Represents the Tool Tracking Point Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateToolTrackingPointBuilder Created in NX8.5.1 |
| Topology | Represents a CAM topology builder Use the NXOpen::CAM::Geometry class to get a topology builder Created in NX8.0.0 |
| TrackingBuilder | Represents a Tracking Builder Created in NX5.0.0 |
| TrackPoint | Represents an Track Point To obtain an instance of this class us NXOpen::CAM::TrackPointCollection Created in NX4.0.0 |
| TrackpointBuilder | Represents a Trackpoint Builder This is an abstract class and can not be instantiated Created in NX5.0.0 |
| TrackPointCollection | Represents the track point collection To obtain an instance of this class, refer to NXOpen::CAM::Tool Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TrimPlane | Represents Trim Plane Created in NX6.0.0 |
| TrimPoint | Represents trim point Created in NX6.0.0 |
| TrochoidalSettings | Represents a NXOpen::CAM::TrochoidalSettings Created in NX6.0.0 |
| TToolBuilder | Represents a T Tool Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateTToolBuilder Created in NX5.0.0 |
| TurnAvoidanceApproachBuilder | Represents an avoidance start of engage Builder Created in NX6.0.0 |
| TurnAvoidanceClearanceBuilder | Represents an avoidance start of engage Builder Created in NX6.0.0 |
| TurnAvoidanceDepartureBuilder | Represents an avoidance start of engage Builder Created in NX6.0.0 |
| TurnAvoidanceFromBuilder | Represents an avoidance from Builder Created in NX6.0.0 |
| TurnAvoidanceGeomBuilder | Represents a TurnAvoidanceGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateTurnAvoidanceGeomBuilder Created in NX5.0.0 |
| TurnAvoidanceGohomeBuilder | Represents an avoidance return Builder Created in NX6.0.0 |
| TurnAvoidancePathPointsBuilder | Represents a turn avoidance path points builder Created in NX6.0.0 |
| TurnAvoidanceReturnBuilder | Represents an avoidance return Builder Created in NX6.0.0 |
| TurnAvoidanceStartBuilder | Represents an avoidance start Builder Created in NX6.0.0 |
| TurnAvoidanceStartOfEngageBuilder | Represents an avoidance start of engage Builder Created in NX6.0.0 |
| TurnBoundaryGeomBuilder | Represents a TurnBoundaryGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateTurnBoundaryGeomBuilder Created in NX5.0.0 |
| TurnConcaveCornerControl | Represents a concave corner ja Created in NX6.0.2 |
| TurnCornerControl | Represents a first plunge ja Created in NX6.0.0 |
| TurnCutParameters | Represents a NXOpen::CAM::TurnCutParameters |
| TurnCutterClearance | Represents a NXOpen::CAM::TurnCutterClearance |
| TurnDirection | Represents a direction Created in NX6.0.0 |
| TurnEngageRetractBuilder | Represents a first plunge Builder Created in NX6.0.0 |
| TurnFeatureGeomBuilder | Represents a TurnFeatureGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateTurnFeatureGeomBuilder Created in NX5.0.0 |
| TurnGeomBuilder | Represents a TurnGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateTurnGeomBuilder Created in NX5.0.0 |
| TurnGrooveCornerControl | Represents a groove corner control ja Created in NX9.0.0 |
| TurningOperation | Represents a Turning operation To create or edit an instance of this class, use NXOpen::CAM::TurningOperationBuilder Created in NX7.5.0 |
| TurningOperationBuilder | Represents a Turning Operation Builder This is an abstract class and cannot be instantiated |
| TurningToolBuilder | Represents a Turning tool builder This is an abstract class, and cannot be instantiated |
| TurnMethodBuilder | Represents a Turn Method Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateTurnMethodBuilder Created in NX5.0.0 |
| TurnMoveToPointBuilder | Represents the Move To Point Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateTurnMoveToPointBuilder Created in NX8.5.1 |
| TurnOrientGeomBuilder | Represents a TurnOrientGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateTurnOrientGeomBuilder Created in NX5.0.0 |
| TurnOrientWcs | Represents an Turn Orient Wcs Builder This is an abstract class, and cannot be instantiated |
| TurnOverlap | Represents a NXOpen::CAM::TurnOverlap |
| TurnPartProbing | Represents a Turn Part Probing operation To create or edit an instance of this class, use NXOpen::CAM::TurnPartProbingBuilder Created in NX8.5.1 |
| TurnPartProbingBuilder | Represents a Turn Part Probing Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateTurnPartProbingBuilder Created in NX8.5.1 |
| TurnProbeClearanceBuilder | Represents an probe start of engage Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateTurnProbeClearanceBuilder Created in NX8.5.1 |
| TurnProbeInspectPointMoveBuilder | Represents the Turn Probe Inspect Point Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateTurnProbeInspectPointMoveBuilder Created in NX8.5.1 |
| TurnRoughFinishLocalReturnBuilder | Represents an avoidance start Builder Created in NX6.0.0 |
| TurnRoughFinishTestCut | Represents a test cut builder Created in NX8.0.0 |
| TurnRoughVariableIncrementBuilder | Represents a Variable Increment Builder Created in NX6.0.0 |
| TurnStock | Represents a NXOpen::CAM::TurnStock |
| TurnThreadEngageRetractBuilder | Represents a Thread Turning Engage or Retract Builder Created in NX6.0.0 |
| TurnThreadFinishPassesBuilder | Represents a TurnThreadFinishPasses Builder Created in NX6.0.0 |
| TurnToolBuilder | Represents a Turn tool builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateTurnToolBuilder Created in NX5.0.0 |
| TurnToolProbing | Represents a Turn tool operation To create or edit an instance of this class, use NXOpen::CAM::TurnToolProbingBuilder Created in NX8.5.1 |
| TurnToolProbingBuilder | Represents a Turn tool probing Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateTurnToolProbingBuilder Created in NX8.5.1 |
| Ude | Represets a User Defined Event To create a new instance of this class, use NXOpen::CAM::UdeSet::CreateUde Created in NX7.0.0 |
| UdeList | Represents a list of objects |
| UdeMoveBuilder | Represents the Ude Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateUdeMoveBuilder Created in NX5.0.0 |
| UdeParameter | Represents a User Defined Event Parameter Created in NX7.5.0 |
| UdeSet | Represets a set of User Defined Events Created in NX7.5.0 |
| UdtSectionBuilder | Represents a UdtSection Builder Created in NX5.0.0 |
| UpDownCutting | Represents a NXOpen::CAM::UpDownCutting |
| UserDefinedMoveBuilder | Represents the User Defined Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateUserDefinedMoveBuilder Created in NX8.0.0 |
| UserDefinedOpr | Represents a User Defined operation To create or edit an instance of this class, use NXOpen::CAM::UserDefinedOprBuilder Created in NX7.5.0 |
| UserDefinedOprBuilder | Represents a UserDefinedOpr Builder This is an abstract class, and cannot be instantiated |
| VariableZLevelMilling | Represents a Variable Z Level Milling Operation To create or edit an instance of this class, use NXOpen::CAM::VazlMillingBuilder Created in NX7.5.0 |
| VazlMillingBuilder | Represents a VazlMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateVazlMillingBuilder Created in NX5.0.0 |
| VectorDistanceMoveBuilder | Represents the Vector Distance Move Builder To create a new instance of this class, use NXOpen::CAM::MoveCollection::CreateVectorDistanceMoveBuilder Created in NX5.0.0 |
| VerticalPosition | Represents a VerticalPosition Builder Created in NX7.5.0 |
| VolumeBased25DMillingOperation | Represents a Floor Wall Milling Operation To create or edit an instance of this class, use NXOpen::CAM::VolumeBased25DMillingOperationBuilder Created in NX8.5.0 |
| VolumeBased25DMillingOperationBuilder | Represents a VolumeBased25DMillingOperation Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateVolumeBased25dMillingOperationBuilder Created in NX8.5.0 |
| WedmArcOutputTypeCiBuilder | Represents a WedmArcOutputTypeCiBuilder Created in NX7.5.0 |
| WedmBasedGeomBuilder | Represents a WedmBasedGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmBasedGeomBuilder Created in NX5.0.0 |
| WedmCornerControlBuilder | Represents a WedmCornerControl Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmCornerControlBuilder Created in NX6.0.0 |
| WedmCustomBoundaryDataBuilder | Represents a WedmCustomBoundaryData Builder No Creator Created in NX6.0.0 |
| WedmCustomBoundaryDataBuilderList | Represents a list of objects |
| WedmCutOrderBuilder | Represents a NXOpen::CAM::WedmCutOrderBuilder This builder cannot be instantiated separately |
| WedmCutParameters | Represents a NXOpen::CAM::WedmCutParameters |
| WedmCuttingBuilder | Represents a WedmCutting Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmCuttingBuilder Created in NX6.0.0 |
| WedmExtGeomBuilder | Represents a WedmExtGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmExtGeomBuilder Created in NX5.0.0 |
| WedmFeatureGeomBuilder | Represents a WedmFeatureGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmFeatureGeomBuilder Created in NX5.0.0 |
| WedmGeomBuilder | Represents a WedmGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmGeomBuilder Created in NX7.5.0 |
| WedmIntGeomBuilder | Represents a WedmIntGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmIntGeomBuilder Created in NX5.0.0 |
| WedmLeadInOutBuilder | Represents a WedmLeadInOut Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmLeadInOutBuilder Created in NX6.0.0 |
| WedmMachineControl | Represents a WEDM Machine Control operation To create or edit an instance of this class, use NXOpen::CAM::WedmMachineControlBuilder Created in NX7.5.0 |
| WedmMachineControlBuilder | Represents a WedmMachineControl Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateWedmMachineControlBuilder Created in NX5.0.0 |
| WedmMethodBuilder | Represents a Wedm Method Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmMethodBuilder Created in NX5.0.0 |
| WedmMoveControlBuilder | Represents a WedmMoveControl Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmMoveControlBuilder Created in NX6.0.0 |
| WedmNocoreGeomBuilder | Represents a WedmNocoreGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmNocoreGeomBuilder Created in NX5.0.0 |
| WedmOpenGeomBuilder | Represents a WedmOpenGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmOpenGeomBuilder Created in NX5.0.0 |
| WedmOperationBuilder | Represents a WedmOperation Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateWedmOperationBuilder Created in NX7.5.0 |
| WedmOrientGeomBuilder | Represents a WedmOrientGeom Builder To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWedmOrientGeomBuilder Created in NX5.0.0 |
| WedmPointDefinitionBuilder | Represents a NXOpen::CAM::WedmPointDefinitionBuilder This builder cannot be instantiated separately |
| WedmStatusControlCiBuilder | Represents a WedmStatusControlCiBuilder Created in NX7.5.0 |
| WedmStepoverBuilder | Represents a NXOpen::CAM::WedmStepoverBuilder |
| WedmUserDefined | Represents a User Defined WEDM operation To create or edit an instance of this class, use NXOpen::CAM::WedmUserDefinedBuilder Created in NX7.5.0 |
| WedmUserDefinedBuilder | Represents a WedmUserDefined Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateWedmUserDefinedBuilder Created in NX5.0.0 |
| WireGuide | Represents a wire guide object To create a new instance of this class, use NXOpen::CAM::WireTool::CreateWireGuide Created in NX9.0.0 |
| WireGuideList | Represents a list of objects |
| WireTool | Represents a Wire Tool To create a new instance of this class, use NXOpen::CAM::NCGroupCollection::CreateWireTool Created in NX9.0.0 |
| WorkInstructionBuilder | Represents the builder for Work Instruction To create a new instance of this class, use NXOpen::CAM::CAMSetup::CreateWorkInstructionBuilder Created in NX9.0.3 |
| WorkInstructionOutputBuilder | Represents the builder for Work Instruction Output |
| ZAxisSmoothing | Represents a NXOpen::CAM::ZAxisSmoothing Created in NX7.5.0 |
| ZLevelMilling | Represents a Z Level Milling Operation To create or edit an instance of this class, use NXOpen::CAM::ZLevelMillingBuilder Created in NX7.5.0 |
| ZLevelMillingBuilder | Represents a ZLevelMilling Builder To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateZlevelMillingBuilder Created in NX5.0.0 |
| CLDKin | Provides classes and interfaces for Manufacturing Kinematics Model |
| CldKinematicsManager | Represents a Manager of CLD Kinematics dialogs Use the static method in this class to obtain an instance |
| JointJogBuilder | To create a new instance of this class, use NXOpen::CLDKin::CldKinematicsManager::CreateJointJogBuilderBuilder Created in NX12.0.1 |
| PoseEditorBuilder | To create a new instance of this class, use NXOpen::CLDKin::CldKinematicsManager::CreatePoseEditorBuilder Created in NX12.0.1 |
| Diagramming | Provides classes and interfaces relating to Diagramming |
| Tables | Provides classes and interfaces for Diagramming Tables |
| CellBuilder | Represents a CellBuilder |
| CellRangeBuilder | Represents a CellRangeBuilder |
| CellSettingsBuilder | Represents a CellSettingsBuilder |
| ColumnBuilder | Represents a ColumnBuilder |
| ContinuationDataBuilder | Represents a ContinuationDataBuilder |
| RowBuilder | Represents a RowBuilder |
| SizedSymbol | Represents sized symbol information |
| Table | Represents the Table class |
| TableBuilder | Represents a TableBuilder |
| TableCollection | Represents a collection of Table |
| iterator | Iterator for accessing the contents of the collection |
| TableSettingsBuilder | Represents a TableSettingsBuilder |
| Annotation | Represents the Annotation class |
| AnnotationBuilder | Represents a AnnotationBuilder |
| AnnotationCollection | Represents a collection of Annotation |
| iterator | Iterator for accessing the contents of the collection |
| BaseObject | Represents the BaseObject class |
| BaseObjectBuilder | Represents a BaseObjectBuilder |
| BaseSubObjectBuilder | Represents a BaseSubObjectBuilder |
| BaseTaggedObjectBuilder | Represents a BaseTaggedObjectBuilder |
| BulkEditBuilder | Represents a BulkEditBuilder to edit bulk of objects |
| CannedAnnotationBuilder | Represents a CannedAnnotationBuilder |
| ConnectableElement | Represents the ConnectableElement class |
| ConnectableElementBuilder | Represents a ConnectableElementBuilder |
| Connection | Represents the Connection class |
| ConnectionBuilder | Represents a ConnectionBuilder |
| ConnectionCollection | Represents a collection of connection |
| iterator | Iterator for accessing the contents of the collection |
| ConnectionLocationBuilder | Represents a ConnectionLocationBuilder |
| ConnectionLocationBuilderList | Represents a list of objects |
| DefineTitleBlockBuilder | Represents a NXOpen::Diagramming::DefineTitleBlockBuilder builder To create a new instance of this class, use NXOpen::Diagramming::TitleBlockCollection::CreateDefineTitleBlockBuilder Created in NX11.0.1 |
| DiagrammingManager | A manager to deal with all objects |
| FormattedStringBuilder | Represents a FormattedStringBuilder |
| Group | Represents the Group class |
| GroupBuilder | Represents a GroupBuilder |
| GroupCollection | Represents a collection of group |
| iterator | Iterator for accessing the contents of the collection |
| LeaderLine | Represents the LeaderLine class |
| LeaderLineBuilder | Represents a LeaderLineBuilder |
| LeaderLineBuilderList | Represents a list of objects |
| LeaderLineCollection | Represents a collection of leader line |
| iterator | Iterator for accessing the contents of the collection |
| LocationBuilder | Represents a LocationBuilder |
| Node | Represents the Node class |
| NodeBuilder | Represents a NodeBuilder |
| NodeCollection | Represents a collection of Node |
| iterator | Iterator for accessing the contents of the collection |
| PopulateTitleBlockBuilder | Represents a NXOpen::Diagramming::PopulateTitleBlockBuilder builder To create a new instance of this class, use NXOpen::Diagramming::TitleBlockCollection::CreatePopulateTitleBlockBuilder Created in NX11.0.1 |
| Port | Represents the Port class |
| PortBuilder | Represents a PortBuilder |
| PortBuilderList | Represents a list of objects |
| PortCollection | Represents a collection of Port |
| iterator | Iterator for accessing the contents of the collection |
| ReferenceGeometry | Represents the Reference Geometry class |
| ReferenceGeometryBuilder | This builder is used to create/edit Reference Geometry To create a new instance of this class, use NXOpen::Diagramming::SmartDiagrammingManager::CreateReferenceGeometryBuilder Created in NX1847.0.0 |
| RenderingPropertiesBuilder | Represents a RenderingPropertiesBuilder |
| Shape | Represents the Shape class |
| ShapeBuilder | Represents a ShapeBuilder |
| ShapeCollection | Represents a collection of Shape |
| iterator | Iterator for accessing the contents of the collection |
| Sheet | Represents the Sheet class |
| SheetBordersAndZones | Represents Sheet Borders and Zones To create or edit an instance of this class, use NXOpen::Diagramming::SheetBordersAndZonesBuilder Created in NX10.0.0 |
| SheetBordersAndZonesBuilder | The SheetBordersAndZones builder To create a new instance of this class, use NXOpen::Diagramming::SheetBordersAndZonesCollection::CreateSheetBordersAndZonesBuilder Created in NX10.0.0 |
| SheetBordersAndZonesCollection | Represents a collection of NXOpen::Diagramming::SheetBordersAndZones objects To obtain an instance of this class, refer to NXOpen::Diagramming::DiagrammingManager Created in NX10.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SheetBorderSettingsBuilder | The SheetBorderSettings builder Created in NX11.0.1 |
| SheetBuilder | Represents a SheetBuilder |
| SheetCollection | Represents a collection of Sheet |
| iterator | Iterator for accessing the contents of the collection |
| SheetElement | Represents the SheetElement class |
| SheetElementBuilder | Represents a SheetElementBuilder |
| SheetManager | A manager to deal with all objects |
| SheetMarginSettingsBuilder | The SheetMarginSettings builder Created in NX11.0.1 |
| SheetZoneSettingsBuilder | The SheetZoneSettings builder Created in NX11.0.1 |
| SmartDiagrammingManager | A manager to deal with all objects |
| TextStyleBuilder | Represents a TextStyleBuilder |
| TitleBlock | Represents a NXOpen::Diagramming::TitleBlock To create or edit an instance of this class, use NXOpen::Diagramming::DefineTitleBlockBuilder Created in NX11.0.1 |
| TitleBlockCellBuilder | Represents a builder to edit NXOpen::Diagramming::TitleBlock 's cell This is a sub-builder class and cannot be directly instantiated Created in NX11.0.1 |
| TitleBlockCellBuilderList | Represents a list of objects |
| TitleBlockCollection | Represents a collection of Title Block |
| iterator | Iterator for accessing the contents of the collection |
| ViewOperations | View operations to be performed on a Diagramming::Sheet |
| DiagrammingLibraryAuthor | Provides classes and interfaces for Diagramming Library Authoring |
| AttributeHolder | Represents a NXOpen::DiagrammingLibraryAuthor::AttributeHolder |
| LineTypeBuilder | Represents a LineTypeBuilder |
| LineTypeBuilderList | Represents a list of objects |
| PipeStockBuilder | Represents a PipeStockBuilder |
| PortDataBuilder | Represents a PortDataBuilder |
| Symbol2DBuilder | Represents a Symbol2DBuilder |
| Symbol3DBuilder | Represents a Symbol3DBuilder |
| Die | Provides classes and interfaces relating to Die Engineering and Die Design |
| AddendumSectionBuilder | Represents a NXOpen::Die::AddendumSectionBuilder which is used to create or edit an addendum section |
| AddendumSectionUserDefinedBuilder | Represents a NXOpen::Die::AddendumSectionUserDefinedBuilder builder used to select a previously defined section or a string of objects to define the section shape |
| AddSurfBuilder | Represents a NXOpen::Die::AddSurfBuilder builder To create a new instance of this class, use NXOpen::Die::DieCollection::CreateAddSurfBuilder Created in NX6.0.0 |
| CastRelief | Represents a cast relief feature To create or edit an instance of this class, use NXOpen::Die::CastReliefBuilder Created in NX6.0.0 |
| CastReliefBuilder | Represents a NXOpen::Die::CastReliefBuilder builder To create a new instance of this class, use NXOpen::Die::DieCollection::CastRelief Default values |
| CastReliefParentBuilder | Represents a Die Cast Relief sub feature |
| ClampingSlot | Represents a clamping slot feature To create or edit an instance of this class, use NXOpen::Die::ClampingSlotBuilder Created in NX6.0.0 |
| ClampingSlotBuilder | Represents a Clamping Slot feature builder To create a new instance of this class, use NXOpen::Die::DieCollection::ClampingSlot Default values |
| Clearance | Represents a die design clearance feature |
| ClearanceBuilder | Represents a builder that is used to create or edit a NXOpen::Die::Clearance feature |
| CompensateRoughDataBuilder | Represents a NXOpen::Die::CompensateRoughDataBuilder |
| ConnectProfileParentBuilder | Represents a Die Connecting Profile sub feature |
| DeckParentBuilder | Represents a Die Deck Feature sub feature |
| DieAssistantFlangeProfile | Represents a NXOpen::Die::DieAssistantFlangeProfile |
| DieAssistantFlangeProfileList | Represents a list of objects |
| DieAssistantTrimProfile | Represents a NXOpen::Die::DieAssistantTrimProfile |
| DieAssistantTrimProfileList | Represents a list of objects |
| DieAttributesBuilder | Represents a NXOpen::Die::DieAttributesBuilder |
| DieBooleanBuilder | Represents a NXOpen::Die::DieBooleanBuilder |
| DieBooleanBuilderList | Represents a list of objects |
| DieCollection | Represents a Die Engineering/Design feature builder |
| iterator | Iterator for accessing the contents of the collection |
| DieDirectionBuilder | Represents a NXOpen::Die::DieDirectionBuilder |
| DieLimitsBuilder | Limits a path to a segment of the path |
| DieLimitsBuilderList | Represents a list of objects |
| DieLocationBuilder | Represents a NXOpen::Die::DieLocationBuilder |
| DieLocationBuilderList | Represents a list of objects |
| DieLocationsBuilder | Represents a NXOpen::Die::DieLocationsBuilder |
| DiePlaneBuilder | Represents a NXOpen::Die::DiePlaneBuilder |
| DieShoe | Represents a die shoe feature To create or edit an instance of this class, use NXOpen::Die::DieShoeBuilder Created in NX6.0.0 |
| DieShoeBuilder | Represents a Die Shoe feature builder |
| DieSimCollection | Represents a collection of Die Simulation - Press Models To obtain an instance of this class, refer to NXOpen::Part Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DrawBead | Represents a draw bead feature |
| DrawBeadBuilder | Represents a builder that is used to create or edit a NXOpen::Die::DrawBead feature |
| DrawBeadSegmentBuilder | Segment builder for Die Engineering draw bead |
| DrawBeadSegmentBuilderList | Represents a list of objects |
| DrawBeadTaperBuilder | Taper definition for the end of the Die Engineering Draw Bead |
| DrawDiePunchBuilder | Represents a Draw Die Punch feature builder |
| DrawDiePunchSectionBuilder | Represents a Draw Die Punch Section sub feature |
| FaceSheetBuilder | Represents a Face Sheet feature This is an abstract class, and cannot be created |
| FillArea | Represents a die design fill area feature |
| FillAreaBuilder | Represents a builder that is used to create or edit a NXOpen::Die::FillArea feature |
| FillBuilder | Represents an Area Fill feature To create a new instance of this class, use NXOpen::Die::DieCollection::Fill Created in NX4.0.0 |
| FingerClearanceNotch | Represents a die design finger clearance notch feature |
| FingerClearanceNotchBuilder | Represents a builder that is used to create or edit a NXOpen::Die::FingerClearanceNotch feature |
| FlangeSteelRibChildBuilder | Represents a Die Flange Steel Rib Child sub feature |
| FlangeSteelRibParentBuilder | Represents a Die Flange Steel Rib Parent sub feature |
| FlangeTaskBuilder | Represents a Flange Task feature builder |
| FormTaskBuilder | Represents a Form Task feature builder |
| HandlingCore | Represents a die design handling core feature |
| HandlingCoreBuilder | Represents a builder that is used to create or edit a NXOpen::Die::HandlingCore feature |
| HandlingCoreChildBuilder | Represents a Die Handling Core Child sub feature |
| HandlingCoreParentBuilder | Represents a Die Handling Core Parent sub feature |
| Heelpost | Represents a heelpost feature To create or edit an instance of this class, use NXOpen::Die::HeelpostBuilder Created in NX6.0.0 |
| HeelpostBuilder | Represents a NXOpen::Die::HeelpostBuilder builder To create a new instance of this class, use NXOpen::Die::DieCollection::Heelpost Default values |
| HoleChildBuilder | Represents a Die Hole Child sub feature |
| HoleParentBuilder | Represents a Die Hole Parent sub feature |
| Keyway | Represents a keyway feature To create or edit an instance of this class, use NXOpen::Die::KeywayBuilder Created in NX6.0.0 |
| KeywayBuilder | Represents a NXOpen::Die::KeywayBuilder builder To create a new instance of this class, use NXOpen::Die::DieCollection::Keyway Default values |
| KeywayChildBuilder | Represents a Die Keyway Child sub feature |
| KeywayParentBuilder | Represents a Die Keyway Parent sub feature |
| LineupBuilder | Represents a Lineup feature builder To create a new instance of this class, use NXOpen::Die::DieCollection::Lineup Created in NX4.0.0 |
| MachineRelief | Represents a die design machine relief feature |
| MachineReliefBuilder | Represents a builder that is used to create or edit a NXOpen::Die::MachineRelief feature |
| OutputCurvesBuilder | Represents an output curves feature builder |
| PadChildBuilder | Represents a Die Pad Child sub feature |
| PadParentBuilder | Represents a Die Pad Parent sub feature |
| PierceHoleChildBuilder | Represents a Pierce Hole Child sub feature |
| PierceHoleParentBuilder | Represents a Pierce Hole Parent sub feature |
| PierceItemBuilder | Represents a NXOpen::Die::PierceItemBuilder |
| PierceItemBuilderList | Represents a list of objects |
| PierceTaskBuilder | Represents a Pierce Task feature builder To create a new instance of this class, use NXOpen::Die::DieCollection::PierceTask Created in NX4.0.0 |
| PointChildBuilder | Represents a Die Point Child sub feature |
| PointParentBuilder | Represents a Die Point Parent sub feature |
| PressModel | Represents a Die Simulation - Press Model Created in NX6.0.0 |
| PressModelRoot | Represents a Die Simulation - Press Model Root |
| PressureSystemChildBuilder | Represents a Die Pressure System Child sub feature |
| PressureSystemParentBuilder | Represents a Die Pressure System Parent sub feature |
| QuickBinderBuilder | Represents a NXOpen::Die::QuickBinderBuilder builder which builds a developable binder sheet body by adding cones, cylinders, or planes to an approximated face |
| QuickBinderWrapBuilder | Represents a NXOpen::Die::QuickBinderWrapBuilder builder This is an abstract class, and cannot be created |
| RibChildBuilder | Represents a Die Rib Child sub feature |
| RibParentBuilder | Represents a Die Rib Parent sub feature |
| RotorBuilder | Represents a CAM Rotor feature builder |
| RotorSectionBuilder | Represents a Rotor Section sub feature |
| SpringbackCompensation | Represents a springback compensation feature |
| SpringbackCompensationBuilder | Used to create or edit a NXOpen::Die::SpringbackCompensation feature |
| SteelInsertBuilder | Represents a Steel Insert feature builder |
| SteelInsertSectionBuilder | Represents a Steel Insert Section sub feature |
| SteelInsertSegmentChildBuilder | Represents a Steel Insert Segment Child sub feature |
| SteelInsertSegmentParentBuilder | Represents a Steel Insert Segment Parent sub feature |
| ThroatChildBuilder | Represents a Die Throat Child sub feature |
| ThroatParentBuilder | Represents a Die Throat Parent sub feature |
| Tip | Represents a Tip feature |
| TrimFlangeDieAssistant | Represents a trim/flange die assistant To create or edit an instance of this class, use NXOpen::Die::TrimFlangeDieAssistantBuilder Created in NX5.0.0 |
| TrimFlangeDieAssistantBuilder | Represents a NXOpen::Die::TrimFlangeDieAssistantBuilder To create a new instance of this class, use NXOpen::Die::DieCollection::TrimFlangeDieAssistant Created in NX5.0.0 |
| TrimLineDevelopmentBuilder | Represents a NXOpen::Features::TrimLineDevelopment builder To create a new instance of this class, use NXOpen::Die::DieCollection::CreateTrimLineDevelopmentBuilder Created in NX6.0.0 |
| TrimTaskBuilder | Represents a Trim Task feature builder |
| UncutRegionsBuilder | Calculates the uncut regions of a curve given a radius value for the cut tool |
| WearPlateLocChildBuilder | Represents a Die Wear Plate Locator sub feature |
| WearPlateLocParentBuilder | Represents a Die Wear Plate Locator sub feature |
| Display | Provides classes and interfaces for Display |
| AnimationCamera | Represents a animaiton camera To create or edit an instance of this class, use NXOpen::Display::AnimationCameraBuilder Created in NX1847.0.0 |
| AnimationCameraBuilder | Represents a animation camera builder To create a new instance of this class, use NXOpen::Display::AnimationCameraCollection::CreateAnimationCameraBuilder Created in NX1847.0.0 |
| AnimationCameraCollection | Represents a collection of animation cameras To obtain an instance of this class, refer to NXOpen::BasePart Created in NX1847.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Background | Represents a NXOpen::Display::Background Background defines how background pixels are displayed |
| BoundedGrid | Represents a bounded grid Bounded grids are not supported in KF |
| BoundedGridBuilder | Represents the builder for creating a bounded grid NXOpen::Display::BoundedGrid |
| Camera | Represents a camera To obtain an instance of this class, use NXOpen::Display::CameraCollection Created in NX5.0.0 |
| CameraBuilder | Represents a NXOpen::Display::CameraBuilder Cameras are not supported in KF |
| CameraCollection | Represents a collection cameras To obtain an instance of this class, refer to NXOpen::BasePart Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CgfxAttr | Represents a Cgfx Attribute This class is restricted to being called from a program running during an Interactive NX session |
| CgfxAttrCollection | Represents a collection NXOpen::Display::CgfxAttr objects This class is restricted to being called from a program running during an Interactive NX session |
| iterator | Iterator for accessing the contents of the collection |
| CgfxAttributeValueColor3Builder | Represents a NXOpen::Display::CgfxAttributeValueColor3Builder builder This class is restricted to being called from a program running during an Interactive NX session |
| CgfxAttributeValueColor4Builder | Represents a NXOpen::Display::CgfxAttributeValueColor4Builder builder This class is restricted to being called from a program running during an Interactive NX session |
| CgfxAttributeValueFileBuilder | Represents a NXOpen::Display::CgfxAttributeValueFileBuilder builder This class is restricted to being called from a program running during an Interactive NX session |
| CgfxAttributeValueFloat3Builder | Represents a NXOpen::Display::CgfxAttributeValueFloat3Builder builder This class is restricted to being called from a program running during an Interactive NX session |
| CgfxAttributeValueFloat4Builder | Represents a NXOpen::Display::CgfxAttributeValueFloat4Builder builder This class is restricted to being called from a program running during an Interactive NX session |
| CgfxAttributeValueIntegerBuilder | Represents a NXOpen::Display::CgfxAttributeValueIntegerBuilder builder This class is restricted to being called from a program running during an Interactive NX session |
| CgfxAttributeValueNumberBuilder | Represents a NXOpen::Display::CgfxAttributeValueNumberBuilder builder This class is restricted to being called from a program running during an Interactive NX session |
| CgfxMattex | Represents a Cgfx Material This class is restricted to being called from a program running during an Interactive NX session |
| CgfxMattexBuilder | Represents a NXOpen::Display::CgfxMattex builder This class is restricted to being called from a program running during an Interactive NX session |
| CgfxMattexCollection | Represents a collection NXOpen::Display::CgfxMattex objects To obtain an instance of this class, refer to NXOpen::BasePart |
| iterator | Iterator for accessing the contents of the collection |
| DatumPlaneGrid | Represents a grid on a datum plane Datum plane grids are not supported in KF |
| DatumPlaneGridBuilder | Represents the builder for adding a datum plane grid NXOpen::Display::DatumPlaneGrid to a datum plane |
| DecalBuilder | Represents a NXOpen::Display::DecalBuilder This class is restricted to being called from a program running during an Interactive NX session |
| DecalCollection | Represents a collection decal material texture This class is restricted to being called from a program running during an Interactive NX session |
| iterator | Iterator for accessing the contents of the collection |
| DynamicSection | Represents a dynamic section To create or edit an instance of this class, use NXOpen::Display::DynamicSectionBuilder Created in NX6.0.0 |
| DynamicSectionBuilder | Represents a Dynamic Section Builder used for creating sections |
| DynamicSectionCollection | Represents a collection of dynamic section objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DynamicSectionCut | Represents a dynamic section-cut generated by sectioning an object such as a NXOpen::IBody or a NXOpen::Assemblies::Component |
| DynamicSectionTypes | Represents a enumerations used by Dynamic Section Builder |
| EntitySelectionPlane | Represents a grid on a datum plane Entity selection planes are not supported in KF |
| EnvironmentBuilder | Represents a Display::EnvironmentBuilder This controls environment image, tone mapping, and stages |
| ExtractScene | Represents a NXOpen::Display::ExtractScene This class is restricted to being called from a program running during an Interactive NX session |
| FacetSettingsBuilder | Represents a NXOpen::Display::FacetSettingsBuilder Facet Settings are not supported in KF |
| GlobalIlluminationBuilder | Represents a NXOpen::Display::GlobalIlluminationBuilder |
| Grid | Represents a grid Grids are not supported in KF |
| GridBuilder | Represents the builder for adding a grid NXOpen::Display::Grid This is an abstract class, and cannot be instantiated |
| GridCollection | Represents a collection of plane grid objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| IDynamicSectionCutCreator | Represents a dynamic section-cut creator that generates dynamic section-cuts (see NXOpen::Display::DynamicSectionCut ) |
| Image | Represents a NXOpen::Display::Image This class is restricted to being called from a program running during an Interactive NX session |
| ImageBase | Represents a NXOpen::Display::ImageBase that provides definition, orientation, sizing, and display setting controls for image based objects |
| ImageBaseBuilder | Represents a NXOpen::Display::ImageBaseBuilder |
| ImageBasedLighting | Represents a NXOpen::Display::ImageBasedLighting Image-based Lighting (IBL) is only performed in High Quality Image renderings |
| ImageCollection | Represents a collection of image objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ImageData | Represents a NXOpen::Display::ImageData that stores the contents of a previously imported image file in the part |
| ImageDataCollection | Represents a collection of NXOpen::Display::ImageData objects |
| iterator | Iterator for accessing the contents of the collection |
| IrayPlusMaterialAttribute | Represents an IrayPlus Attribute This class is restricted to being called from a program running during an Interactive NX session |
| IrayPlusMaterialAttributeEnum | Represents a IrayPlus Enum Attribute This class is restricted to being called from a program running during an Interactive NX session |
| IrayPlusMaterialEditorBuilder | Represents a NXOpen::Display::IrayPlusMaterialEditorBuilder This class is restricted to being called from a program running during an Interactive NX session |
| IrayPlusSimpleMaterialEditorBuilder | Represents a NXOpen::Display::IrayPlusSimpleMaterialEditorBuilder This class is restricted to being called from a program running during an Interactive NX session |
| IRayPlusStudioEditorBuilder | Represents a NXOpen::Display::IRayPlusStudioEditorBuilder |
| LayerSettingsBuilder | Represents a builder for object layer settings |
| LightBuilder | Represents a NXOpen::Display::LightBuilder This class is restricted to being called from a program running during an Interactive NX session |
| Lighting | Represents a NXOpen::Display::Lighting Lights are used to illuminate the scene in Shaded and Studio rendering styles, as well as in High Quality Images |
| NonProportionalZoom | Provides non-proportional zoom capability To create a new instance of this class, use NXOpen::ViewCollection::CreateNonProportionalZoom Default values |
| PerspectiveOptionsBuilder | Represents a NXOpen::Display::PerspectiveOptionsBuilder Cameras are not supported in KF |
| PlanarShipGrid | Represents a planar ship grid |
| PlanarShipGridBuilder | Represents a NXOpen::Display::PlanarShipGrid builder |
| PlaneGrid | Represents a grid on a bounded plane Plane grids are not supported in KF |
| PlaneGridBuilder | Represents the builder for adding a bounded grid NXOpen::Display::PlaneGrid to a plane |
| PointCloud | Represents a NXOpen::Display::PointCloud imported from point data files |
| PointCloudBuilder | Represents a Display::PointCloudBuilder |
| PointCloudClippingBoxesListItemBuilder | Represents a NXOpen::Display::PointCloudClippingBoxesListItemBuilder to create clipping regions for NXOpen::Display::PointCloud |
| PointCloudClippingBoxesListItemBuilderList | Represents a list of objects |
| PointCloudCollection | Represents a collection of point cloud objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| RasterImage | Represents a NXOpen::Display::RasterImage that provides placing an imported image onto a plane (with controls for orientation, sizing, and display) to use as a reference in the model to create geometry |
| RasterImageBuilder | Represents a NXOpen::Display::RasterImageBuilder |
| RayTracedStudioBuilder | Represents a NXOpen::Display::RayTracedStudioBuilder |
| RayTracedStudioEditorBuilder | Represents a NXOpen::Display::RayTracedStudioEditorBuilder |
| Reflection | Represents a NXOpen::Display::Reflection Reflection defines the source of reflection in shiny objects for Studio rendering style or High Quality Images |
| SaveImageFileBrowserBuilder | Represents a NXOpen::Display::SaveImageFileBrowserBuilder |
| Scene | Represents a NXOpen::Display::Scene A scene is comprised of background, stage, reflection, lights and image-based lighting subobjects |
| SectionCurveSettingsBuilder | Represents a NXOpen::Display::SectionCurveSettingsBuilder |
| SelPref | Represents a NXOpen::Display::SelPref To obtain a instance of this class use Display::SelPrefCollection::CreateSelPref Created in NX5.0.0 |
| SelPrefCollection | Represents a collection SelPref To obtain an instance of this class, refer to NXOpen::BasePart Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Shadows | Represents a NXOpen::Display::Shadows This class is restricted to being called from a program running during an Interactive NX session |
| Stage | Represents a NXOpen::Display::Stage A stage is an environment cube, a six-sided room, that can have between one and six visible walls |
| StudioImageCaptureBuilder | Represents a NXOpen::Display::StudioImageCaptureBuilder This class is restricted to being called from a program running during an Interactive NX session |
| TransientText | Represents temporary text strings which can be used for Temporary Display Created in NX8.0.0 |
| TrueShading | Represents a True Shading object TrueShading is not supported in KF |
| TrueShadingBuilder | Represents a NXOpen::Display::TrueShading builder To create a new instance of this class, use NXOpen::Display::TrueShadingCollection::CreateTrueShadingBuilder Created in NX6.0.0 |
| TrueShadingCollection | Represents a collection SHED objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TrueStudio | Represents a True Shading object TrueStudio is not supported in KF |
| TrueStudioBuilder | The TrueStudioBuillder manages Advanced Studio visualization display To create a new instance of this class, use NXOpen::Display::TrueStudioCollection::CreateTrueStudioBuilder Created in NX8.0.0 |
| TrueStudioCollection | Represents a collection TrueStudio objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Wall | Represents a NXOpen::Display::Wall This class is restricted to being called from a program running during an Interactive NX session |
| DMU | Provides classes and interfaces for DMU |
| DMUManager | Represents an object that manages DMU application specific objects and preferences |
| ISnapshot | Represents the NXOpen::DMU::ISnapshot object |
| Snapshot | Represents the NXOpen::DMU::Snapshot object |
| SnapshotCollection | Represents the collection object for all snapshot in a part |
| iterator | Iterator for accessing the contents of the collection |
| Drafting | Provides classes and interfaces for the Drafting |
| AnnotateViewsBuilder | This class is used to annotate views based on the knowledge fusion rules |
| AttributeItemBuilder | Represents a NXOpen::Drafting::AttributeItemBuilder |
| AttributeItemBuilderList | Represents a list of objects |
| AutomationManager | Represents a NXOpen::Drafting::AutomationManager |
| AutomationPreferencesBuilder | Builder for Drafting Automation Preferences To create a new instance of this class, use NXOpen::Drafting::AutomationManager::CreatePreferencesBuilder Created in NX8.0.0 |
| AutomationRuleBuilder | Represents a NXOpen::Drafting::AutomationRuleBuilder Created in NX9.0.0 |
| BaseEditSettingsBuilder | Represents a NXOpen::Drafting::BaseEditSettingsBuilder |
| CutCopyPasteBuilder | Represents a paste in Drafting |
| CutCopyPasteLeaderBuilder | Represents a Drafting Paste, especially when reassociating a leader on paste |
| DistributeAnnotationsBuilder | This class is used to distribute annotations associated to a view |
| DraftingApplicationManager | Represents an object that manages drafting objects and member views |
| DrawingAutomationWizard | Represents callback data for the drawing automation wizard |
| DrawingCreationWizardBuilder | Represents a NXOpen::Drafting::DrawingCreationWizardBuilder |
| MoveToDrawingViewBuilder | This builder allows the user to extract contents from a sheet and transfer them to a new Drawing view, also provide some other options for view creation To create a new instance of this class, use NXOpen::Drafting::DraftingApplicationManager::CreateMoveToDrawingViewBuilder Default values |
| PreferencesBuilder | Represents a NXOpen::Drafting::PreferencesBuilder builder To create a new instance of this class, use NXOpen::Drafting::SettingsManager::CreatePreferencesBuilder Default values |
| PrimaryContentItemBuilder | Represents a NXOpen::Drafting::PrimaryContentItemBuilder |
| PrimaryContentItemBuilderList | Represents a list of objects |
| RulesBuilder | This class is used to specify knowledge fusion rules in a drawing template |
| SettingsManager | Represents an object that manages drafting settings |
| SmashDrawingViewBuilder | This builder allows the user to break a Drawing View into its parts and delete the Drawing View To create a new instance of this class, use NXOpen::Drafting::DraftingApplicationManager::CreateSmashDrawingViewBuilder Created in NX8.5.0 |
| SpecifyRuleBuilder | This class is used to specify knowledge fusion rule for a note object in a drawing template |
| Drawings | Provides classes and interfaces for Drafting Drawings |
| AddObjectsToRegionBuilder | Creates the builder for associating the symbols from library to the region To create a new instance of this class, use NXOpen::Drawings::DrawingRegionCollection::CreateAddObjectsToRegionBuilder Created in NX8.0.0 |
| AddRemoveBoxViewBuilder | This class is used to construct the add remove box view Builder To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateAddRemoveBoxViewBuilder Created in NX8.0.0 |
| AnnotationSettingsBuilder | Represents a Drawings::AnnotationSettingsBuilder |
| AssociativeAngleBuilder | This builder allows the user to create an associative or non-associative angle by measuring between a combination of two objects or vectors evaluated on a specified plane, or by an expression Created in NX11.0.0 |
| AutomationBookletBuilder | Represents a NXOpen::Drawings::AutomationBookletBuilder |
| AutomationTemplateRegionBuilder | Represents a NXOpen::Drawings::AutomationTemplateRegionBuilder |
| BaseHalfSectionLine | Represents a Base Half Section Line |
| BasePointToPointSectionLine | Represents a Base Point to Point Section Line |
| BaseSteppedSectionLine | Represents a Base Stepped Section Line |
| BaseView | Represents a Base View |
| BaseViewBuilder | Represents a NXOpen::Drawings::BaseView builder To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateBaseViewBuilder Default values |
| BaseViewStyle | Represents set of Base View Style Preferences applicable to drafting views |
| BorderAndZoneStyleBuilder | Represents the Border and Zone Style Builder which manages all the style attributes related to sheet borders, sheet margins and sheet zones |
| BordersAndZones | Represents Borders and Zones To create or edit an instance of this class, use NXOpen::Drawings::BordersAndZonesBuilder Created in NX8.0.0 |
| BordersAndZonesBuilder | Builder for creating Borders and Zones |
| BordersAndZonesCollection | Represents a collection of NXOpen::Drawings::BordersAndZones objects To obtain an instance of this class, refer to NXOpen::DraftingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BrokenViewBuilder | This class is used to construct the broken view Builder To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateBrokenViewBuilder Default values |
| CompareReportBuilder | Represents a NXOpen::Drawings::CompareReportBuilder builder To create a new instance of this class, use NXOpen::DrawingCompareManager::CreateCompareReportBuilder Created in NX7.5.0 |
| ConversionProcessSettingsBuilder | Represents a Drawings::ConversionProcessSettingsBuilder |
| ConvertDraftingContentsBuilder | Represents a Drawings::ConvertDraftingContentsBuilder |
| ConvertToPMIBuilderManager | Represents NXOpen::Drawings::ConvertToPMIBuilderManager To obtain an instance of this class, refer to NXOpen::BasePart Created in NX11.0.0 |
| CustomViewSettingsBuilder | This class represents the "this class represents Drawings.CustomViewSettingsBuilder |
| DetailView | Represents a Detail View |
| DetailViewBuilder | Represents a NXOpen::Drawings::DetailView |
| DraftingBody | Represents a drafting body |
| DraftingBodyCollection | Represents a collection of NXOpen::Drawings::DraftingBody s |
| iterator | Iterator for accessing the contents of the collection |
| DraftingComponentSelectionBuilder | This builder allows the user to select a view in which component objects can be designated as primary or secondary geometry Created in NX11.0.0 |
| DraftingCurve | Represents a Drafting VD Curve |
| DraftingCurveCollection | Represents a collection of NXOpen::Drawings::DraftingCurve s |
| iterator | Iterator for accessing the contents of the collection |
| DraftingCurveInfo | Represents Drafting Curve Info Created in NX10.0.0 |
| DraftingDrawingSheet | Represents a drafting drawing sheet |
| DraftingDrawingSheetBuilder | Represents a Builder for creating NXOpen::Drawings::DraftingDrawingSheet s To create a new instance of this class, use NXOpen::Drawings::DraftingDrawingSheetCollection::CreateDraftingDrawingSheetBuilder Created in NX12.0.0 |
| DraftingDrawingSheetCollection | Represents a collection of NXOpen::Drawings::DraftingDrawingSheet s |
| iterator | Iterator for accessing the contents of the collection |
| DraftingPoint | Represents a Drafting VD Point |
| DraftingPointCollection | Represents a collection of NXOpen::Drawings::DraftingPoint s |
| iterator | Iterator for accessing the contents of the collection |
| DraftingView | Represents a drafting view |
| DraftingViewCollection | Represents a collection of NXOpen::Drawings::DraftingView s |
| iterator | Iterator for accessing the contents of the collection |
| DrawingCompareSettingsBuilder | Represents a NXOpen::Drawings::DrawingCompareSettingsBuilder builder To create a new instance of this class, use NXOpen::DrawingCompareManager::CreateDrawingCompareSettingsBuilder Default values |
| DrawingFormatSheetBuilder | Represents a NXOpen::Drawings::DrawingFormatSheetBuilder |
| DrawingRegion | Represents a Drawing Region To create or edit an instance of this class, use NXOpen::Drawings::DrawingRegionBuilder Created in NX8.0.0 |
| DrawingRegionBuilder | Represents a Drawing Region Builder To create a new instance of this class, use NXOpen::Drawings::DrawingRegionCollection::CreateDrawingRegionBuilder Default values |
| DrawingRegionCollection | Represents a collection of drawing regions Use NXOpen::Drawings::DrawingRegion to get the instance of this class |
| iterator | Iterator for accessing the contents of the collection |
| DrawingRegionRulesBuilder | Represents a Drawing region rules builder Created in NX8.0.0 |
| DrawingSheet | Represents a drawing sheet |
| DrawingSheetBuilder | Represents a NXOpen::Drawings::DrawingSheetBuilder This class was made abstract in NX12 and the creator (JA_DRAWING_SHEET_COLLECTION_drawing_sheet_builder) was deprecated Created in NX5.0.0 |
| DrawingSheetCollection | Represents a collection of drawing sheets |
| iterator | Iterator for accessing the contents of the collection |
| DrawingsPropertiesBuilder | Represents an NXOpen::Drawings::DrawingsPropertiesBuilder to be used for marking the component as secondary geometry |
| DrawingView | Drawing View - an empty view created without any geometric objects |
| DrawingViewBuilder | This builder allows the user to create a Drawing View To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateDrawingViewBuilder Default values |
| EditSectionLineSettingsBuilder | Represents a NXOpen::Drawings::EditSectionLineSettingsBuilder builder |
| EditViewLabelSettingsBuilder | Represents a NXOpen::Drawings::EditViewLabelSettingsBuilder builder |
| EditViewSettingsBuilder | Represents a NXOpen::Drawings::EditViewSettingsBuilder builder |
| FlatPatternObject | Provides an interface to the data available for flat pattern objects on drawing views |
| FlatPatternViewStyle | Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings |
| GeneralViewStyle | Represents set of General View Styles Preferences applicable to drafting views |
| GeneralWorkFlowBuilder | Represents a NXOpen::Drawings::GeneralWorkFlowBuilder |
| HalfPictorialSectionLine | Half Pictorial Section Line is used to create a pictorial view with half of the part sectioned and the other half un-sectioned |
| HalfSectionLine | Half Section Line is used to create a view with half of the part sectioned and the other half un-sectioned |
| HalfSectionLineBuilder | Represents a NXOpen::Drawings::HalfSectionLineBuilder |
| HiddenLinesViewStyle | Represents set of Hidden Lines View Style Preferences applicable to drafting views |
| HiddenObjectsBuilder | This builder allows the user to select a view in which component objects can be designated as hidden or shown Created in NX6.0.0 |
| HingeLineBuilder | Represents a Drawings.HingeLineBuilder |
| InheritPmiViewStyle | Represents set of InheritPmiViewStyle applicable to drafting views |
| MarkAsTemplateBuilder | Represents a NXOpen::Drawings::MarkAsTemplateBuilder To create a new instance of this class, use NXOpen::DraftingManager::CreateMarkAsTemplateBuilder Created in NX8.0.0 |
| MultipleViewPlacementBuilder | This builder allows the user to create a Multiple View Placement Created in NX6.0.2 |
| OrderManager | Represents an object that manages orders |
| OrientationViewStyle | Represents set of Orientation View Style Preferences applicable to drafting views |
| OrientedSectionLine | Represents a Oriented Section Line |
| OrientedSectionLineBuilder | Represents a NXOpen::Drawings::OrientedSectionLineBuilder |
| OvtBuilder | Represents a NXOpen::Drawings::OvtBuilder |
| ParentViewBuilder | Represents a NXOpen::Drawings::ParentViewBuilder |
| PerspectiveViewStyle | Represents set of PerspectiveViewStyle applicable to drafting views |
| PictorialSectionLine | A Pictorial Simple or Pictorial Stepped Section Line |
| PointAndAngleSectionLine | Point and Angle Section Line lets you create a view with multiple segment cuts with no bends |
| PointAndAngleSectionLineBuilder | Represents a NXOpen::Drawings::PointAndAngleSectionLineBuilder |
| PointToPointSectionLine | Point to Point Section Line lets you create a view with multiple segment cuts with no bends |
| PointToPointSectionLineBuilder | Represents a NXOpen::Drawings::PointToPointSectionLineBuilder |
| ProjectedView | Represents a Projected View |
| ProjectedViewBuilder | Represents a NXOpen::Drawings::ProjectedView builder To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateProjectedViewBuilder Default values |
| ProjectedViewOrientationBuilder | Represents a NXOpen::Drawings::ProjectedViewOrientationBuilder |
| ProjectedViewStyle | Represents set of Projected View Style Preferences applicable to drafting views |
| RefineDisplayBuilder | Represents a NXOpen::Drawings::RefineDisplayBuilder |
| RemoveObjectsBuilder | Creates the builder for removing associated objects from the region To create a new instance of this class, use NXOpen::Drawings::DrawingRegionCollection::CreateRemoveObjectsBuilder Created in NX8.0.0 |
| RenderSet | Represents a RenderSet |
| ReportBuilder | Represents a Drawings::ReportBuilder |
| RevolvedSectionLine | Revolved Section Line is used to create section views which are revolved about an axis |
| RevolvedSectionLineBuilder | Represents a NXOpen::Drawings::RevolvedSectionLineBuilder |
| SecondaryGeometryInViewsBuilder | This builder allows the user to select existing view(s) in which component objects can be designated as secondary or primary To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateSecondaryGeometryInViewsBuilder Default values |
| SectionInViewBuilder | This builder allows the user to select a view in which component or solid body objects can be designated as section, non-sectioned, or neither To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateSectionInViewBuilder Default values |
| SectionLine | Represents a Section Line |
| SectionLineBuilder | Represents a NXOpen::Drawings::SectionLineBuilder |
| SectionLineCollection | Represents a collection of NXOpen::Drawings::SectionLine s |
| iterator | Iterator for accessing the contents of the collection |
| SectionLineSegmentBuilder | Represents a NXOpen::Drawings::SectionLineSegmentBuilder |
| SectionLineSegmentBuilderList | Represents a list of objects |
| SectionLineSegmentPointBuilder | Represents Section Line Segment Point Builder To create a new instance of this class, use NXOpen::Drawings::SectionLineSegmentPointListBuilder::CreateSectionLineSegmentPointBuilder Created in NX10.0.0 |
| SectionLineSegmentPointListBuilder | Represents SectionLineSegmentPointListBuilder class |
| SectionLineSegmentsBuilder | Represents a class Drawings.SectionLineSegmentsBuilder |
| SectionLineSettingsBuilder | Represents the Section Line Settings Builder (Drawings.SectionLineSettingsBuilder) which manages all the style attributes related to the section Line including label letter |
| SectionLineStyleBuilder | Represents a Drawings.SectionLineStyleBuiler |
| SectionView | Represents a Section View |
| SectionViewBuilder | Represents a NXOpen::Drawings::SectionView builder To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateSectionViewBuilder Default values |
| SectionViewStyle | Represents set of Section View Style Preferences applicable to drafting views |
| SelectDraftingView | Represents a single object selection |
| SelectDraftingViewList | Represents a list of objects on a selection list |
| SelectDrawingRegion | Represents a single object selection |
| SelectDrawingView | Represents a single object selection |
| SelectDrawingViewList | Represents a list of objects on a selection list |
| SelectModelViewBuilder | Represents a Select Model View builder that selects a model view |
| SelectRegionBuilder | Creates the builder for associating the objects from the screen To create a new instance of this class, use NXOpen::Drawings::DrawingRegionCollection::CreateSelectRegionBuilder Created in NX8.0.0 |
| SelectSectionLine | Represents a single object selection |
| SettingsBuilder | Represents a Drawings::SettingsBuilder |
| ShadingViewStyle | Represents set of Shading View style applicable to drafting views |
| SheetBorderSettingsBuilder | Represents a NXOpen::Drawings::SheetBorderSettingsBuilder |
| SheetDraftingViewCollection | Represents a collection of NXOpen::Drawings::DraftingView s |
| iterator | Iterator for accessing the contents of the collection |
| SheetMarginSettingsBuilder | Represents the Drawing Sheet Margins Style Builder |
| SheetSectionLineCollection | Represents a collection of NXOpen::Drawings::SectionLine s |
| iterator | Iterator for accessing the contents of the collection |
| SheetTemplateManager | Represents a manager of NXOpen::Drawings::DraftingView s |
| SheetZoneReferenceBuilder | Builder for creating sheet zone refernce control strings based on the selected attribute and view To create a new instance of this class, use NXOpen::DraftingManager::CreateSheetZoneReferenceBuilder Created in NX8.0.0 |
| SheetZoneSettingsBuilder | Represents the Drawing Sheet Zone Setting Style Builder |
| ShipbuildingLinesViewStyle | Represents set of Shipbuilding Lines View Style applicable to drafting views |
| ShipDraftingViewLinesBuilder | Represents a ship view lines block Default values |
| ShipDraftingViewLinesBuilderList | Represents a list of objects |
| ShipDraftingViewLinesViewStyle | Represents set of Ship Drafting Lines View Style applicable to drafting views |
| SketchedHalfSectionLine | Sketched Half Section Line is sketch based section line |
| SketchedPointToPointSectionLine | Sketched Point to Point Section Line is sketch based section line |
| SketchedSteppedSectionLine | A Sketched Simple or Stepped Section Line is sketch based section line |
| SketchSectionLineBuilder | Represents a Drawings::SectionLine builder To create a new instance of this class, use NXOpen::Drawings::SectionLineCollection::CreateSketchSectionLineBuilder Default values |
| SmoothEdgesViewStyle | Represents set of Smooth Edges View Style Preferences applicable to drafting views |
| SpecifySectionLineBuilder | Select a section line Created in NX6.0.0 |
| StandardViewsBuilder | This builder allows the user to create a Drawing View To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateStandardViewsBuilder Default values |
| SteppedSectionLine | A Simple or Stepped Section Line |
| SteppedSectionLineBuilder | Represents a NXOpen::Drawings::SteppedSectionLineBuilder |
| SvtBuilder | Represents a NXOpen::Drawings::SvtBuilder |
| ThreadsViewStyle | Represents set of Threads View Style Preferences applicable to drafting views |
| TraceLinesViewStyle | Represents interface for Trace Lines View Style Preferences applicable to drafting views |
| TrackDrawingChangesGeneralBuilder | Represents a NXOpen::Drawings::TrackDrawingChangesGeneralBuilder |
| TrackDrawingChangesReportFilterBuilder | Represents a Drawings::TrackDrawingChangesReportFilterBuilder |
| UpdateViewsBuilder | Represents a NXOpen::Drawings::UpdateViewsBuilder To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateUpdateViewsBuilder Created in NX5.0.0 |
| View2dOrientBuilder | Represents the View 2D Orientation (Drawings.View2dOrientBuilder) |
| ViewAlignment | View Alignment object |
| ViewAlignmentBuilder | Represents a NXOpen::Drawings::ViewAlignmentBuilder .This class is used to construct the view alignment Builder To create a new instance of this class, use NXOpen::Drawings::ViewAlignmentCollection::CreateViewAlignmentBuilder Default values |
| ViewAlignmentCollection | Represents a collection of NXOpen::Drawings::ViewAlignment s |
| iterator | Iterator for accessing the contents of the collection |
| ViewBoundaryBuilder | Represents the View Boundary (Drawings.ViewBoundaryBuilder) |
| ViewBreak | ViewBreak - defines the portion of a view that gets hidden to produce a broken view To create or edit an instance of this class, use NXOpen::Drawings::BrokenViewBuilder Created in NX7.5.0 |
| ViewBreakBuilder | Represents a NXOpen::Drawings::ViewBreakBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| ViewBreakCollection | Represents a collection of NXOpen::Drawings::ViewBreak s |
| iterator | Iterator for accessing the contents of the collection |
| ViewCenterCoordinateBuilder | Represents the View center coodinate (Drawings.ViewCenterCoordinateBuilder) Created in NX6.0.0 |
| ViewCommonViewLabelBuilder | Represents a NXOpen::Drawings::ViewCommonViewLabelBuilder |
| ViewCopyTo3dBuilder | Represents a NXOpen::Drawings::ViewCopyTo3dBuilder |
| ViewCreationWizardBuilder | This builder allows the user to create a Drawing View To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateViewCreationWizardBuilder Default values |
| ViewDetailLabelBuilder | Represents a NXOpen::Drawings::ViewDetailLabelBuilder |
| ViewingDirectionArrow | This class represents a Drafting Viewing Direction Arrow |
| ViewingDirectionArrowLabel | This class represents a Drafting Viewing Direction Arrow Label |
| ViewLabelBuilder | Represents a NXOpen::Drawings::ViewLabelBuilder |
| ViewOrientationBuilder | Represents a ViewOrientationBuilder |
| ViewPlacementBuilder | Represents a NXOpen::Drawings::ViewPlacementBuilder |
| ViewProjectedArrowSettingsBuilder | Represents a NXOpen::Drawings::ViewProjectedArrowSettingsBuilder Created in NX9.0.0 |
| ViewProjectedLabelBuilder | Represents a NXOpen::Drawings::ViewProjectedLabelBuilder |
| ViewProjectedViewSettingsBuilder | Represents a NXOpen::Drawings::ViewProjectedViewSettingsBuilder Created in NX9.0.0 |
| ViewProjectionBuilder | Represents a NXOpen::Drawings::ViewProjectionBuilder |
| ViewProjectionPlaneBuilder | Represents the View Projection Plane (Drawings.ViewProjectionPlaneBuilder) Created in NX6.0.2 |
| ViewScaleBuilder | Represents the View Scale (Drawings.ViewScaleBuilder) |
| ViewSectionLabelBuilder | Represents a NXOpen::Drawings::ViewSectionLabelBuilder |
| ViewSectionLineBuilder | Represents a NXOpen::Drawings::ViewSectionLineBuilder |
| ViewSettingsBuilder | Represents a Drawings::ViewSettingsBuilder |
| ViewStyle | Represents set of style applicable to drafting views |
| ViewStyleBaseBuilder | Represents the BASE tab on the View Style Dialog (Drawings.ViewStyleBaseBuilder) |
| ViewStyleBuilder | Represents the View Style Builder (Drawings.ViewStyleBuilder) which manages all the style attributes related to the view including base view, projected view, drawing view, detail view, broken view, section view etc |
| ViewStyleDetailBuilder | Represents the DETAIL tab on the View Style Dialog (Drawings.ViewStyleDetailBuilder) |
| ViewStyleFPCalloutConfigBuilder | Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder) |
| ViewStyleFPCalloutsBuilder | Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder) |
| ViewStyleFPCurvesBuilder | Represents the Curve section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCurvesBuilder) |
| ViewStyleGeneralBuilder | Represents view style general builder (Drawings.ViewStyleGeneralBuilder) which manages all the general attributes which are necessary for all the views |
| ViewStyleHiddenLinesBuilder | Represents the HIDDEN LINES tab on the View Style Dialog (Drawings.ViewStyleHiddenLinesBuilder) |
| ViewStyleInheritPmiBuilder | Represents the INHERIT PMI tab on the View Style Dialog (Drawings.ViewStyleInheritPmiBuilder) |
| ViewStyleOrientationBuilder | Represents the ORIENTATION tab on the View Style Dialog (Drawings.ViewStyleOrientationBuilder) |
| ViewStylePerspectiveBuilder | Represents the PERSPECTIVE tab on the View Style Dialog (Drawings.ViewStylePerspectiveBuilder) |
| ViewStyleProjectedBuilder | Represents the PROJECTED tab on the View Style Dialog (Drawings.ViewStyleProjectedBuilder) |
| ViewStyleSecondaryComponentsBuilder | Represents the Secondary Geometry tab on the View Style Dialog (Drawings.ViewStyleHiddenLinesBuilder) |
| ViewStyleSectionBuilder | Represents the SECTION tab on the View Style Dialog (Drawings.ViewStyleSectionBuilder) |
| ViewStyleSectionConstraintsBuilder | Represents the SECTION CONSTRAINTS tab on the View Style Dialog (Drawings.ViewStyleSectionConstraintsBuilder) |
| ViewStyleShadingBuilder | Represents the SHADING tab on the View Style Dialog (Drawings.ViewStyleShadingBuilder) |
| ViewStyleShipbuildingLinesBuilder | Represents the Shipbuilding LINES tab on the View Style Dialog (Drawings.ViewStyleShipbuildingLinesBuilder) To create a new instance of this class, use NXOpen::Drawings::DraftingViewCollection::CreateShipbuildingLineBuilder Created in NX8.0.0 |
| ViewStyleShipbuildingLinesBuilderList | Represents a list of objects |
| ViewStyleSmoothEdgesBuilder | Represents the SMOOTH EDGES tab on the View Style Dialog (Drawings.ViewStyleSmoothEdgesBuilder) |
| ViewStyleThreadsBuilder | Represents the THREADS tab on the View Style Dialog (Drawings.ViewStyleThreadsBuilder) |
| ViewStyleTraceLinesBuilder | Represents the TRACE LINES tab on the View Style Dialog (Drawings.ViewStyleTraceLinesBuilder) |
| ViewStyleVirtualIntersectionsBuilder | Represents the VIRTUAL INTERSECTIONS tab on the View Style Dialog (Drawings.ViewStyleVirtualIntersectionsBuilder) |
| ViewStyleVisibleLinesBuilder | Represents the VISIBLE LINES tab on the View Style Dialog (Drawings.ViewStyleVisibleLinesBuilder) |
| ViewWorkflowBuilder | Represents a NXOpen::Drawings::ViewWorkflowBuilder Created in NX9.0.0 |
| VirtualIntersectionsViewStyle | Represents set of Virtual Intersections View Style Preferences applicable to drafting views |
| VisibleAndHiddenLinesColorFontWidthBuilder | Represent a NXOpen::Drawings::VisibleAndHiddenLinesColorFontWidthBuilder This is a sub-builder class and cannot be directly instantiated Created in NX11.0.0 |
| VisibleLinesViewStyle | Represents set of Visible Lines View Style Preferences applicable to drafting views |
| VisualDrawingComparePrefsBuilder | This class gets and sets components of Visual Overlay in Drafting Preferences |
| Facet | Provides classes and interfaces for Faceted Representations |
| AdjustMinimumRadiusBuilder | Represents a NXOpen::Facet::AdjustMinimumRadiusBuilder |
| BestFitAlignBuilder | This class performs the best fit alignment between objects To create a new instance of this class, use NXOpen::Facet::FacetedBodyCollection::CreateBestFitAlignBuilder Created in NX6.0.0 |
| BridgeFacetBodyBuilder | Represents a NXOpen::Facet::BridgeFacetBodyBuilder It bridges two disjoint NX facet bodies |
| CleanupFacetBodyBuilder | Represents a NXOpen::Facet::CleanupFacetBodyBuilder builder |
| CombineFacetBodyBuilder | Represents a NXOpen::Facet::CombineFacetBodyBuilder builder |
| ConvertFacetBodyBuilder | Represents a NXOpen::Facet::ConvertFacetBodyBuilder builder |
| CreateTransitionBuilder | Represents a NXOpen::Facet::CreateTransitionBuilder builder |
| CurvatureBuilder | Represents a NXOpen::Facet::CurvatureBuilder |
| DecimateFacetBodyBuilder | Represents a NXOpen::Facet::DecimateFacetBodyBuilder |
| DetectPrimitivesBuilder | This class manages the primitive shape detection for a facet body |
| DivideFacetFaceBuilder | Represents a NXOpen::Facet::DivideFacetFaceBuilder |
| ExtrudeFacetBodyBuilder | Represents a NXOpen::Facet::ExtrudeFacetBodyBuilder It extrudes a NX Facet Body |
| ExtrudeProfileBuilder | Represents a NXOpen::Facet::ExtrudeProfileBuilder It extrudes 3D closed profile between planes |
| FacetBodyFromBodyBuilder | Represents a NXOpen::Facet::FacetBodyFromBodyBuilder builder |
| FacetedBody | Represents a faceted body |
| FacetedBodyCollection | Represents a collection of faceted bodies in a part To obtain an instance of this class, refer to NXOpen::Part Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FacetedEdge | Represents a faceted edge |
| FacetedFace | Represents a faceted face |
| FacetingParameters | The structure of JA faceting parameters |
| FacetModelingCollection | Collection of freeform facet operations |
| FeatureExtractionBuilder | Represents a NXOpen::Facet::FeatureExtractionBuilder It extracts feature lines or separates regions of different curvature from a facet body based on the curvature map |
| FillHoleBuilder | This class finds and fills holes to a prescribed boundary smoothness condition |
| LocalOffsetBuilder | Represents a NXOpen::Facet::LocalOffsetBuilder |
| MergeFacetBodyBuilder | Represents a NXOpen::Facet::MergeFacetBodyBuilder It merges two overlapping NX facet bodies |
| MergeFacetFacesBuilder | Represents a Facet::MergeFacetFacesBuilder builder To create a new instance of this class, use NXOpen::Facet::FacetModelingCollection::CreateMergeFacetFacesBuilder Default values |
| MultiPatchAlignmentBuilder | Aligns multiple facet bodies to one another without using reference points |
| PaintBrushBuilder | This class manages the paint brush utility for a facet body |
| PaintFacetBodyBuilder | This class manages the color painting on a facet body |
| PolygonModelingBuilder | Represents a NXOpen::Facet::PolygonModelingBuilder builder |
| RemeshFacetBodyBuilder | Represents a NXOpen::Facet::RemeshFacetBodyBuilder |
| RemoveUndercutsBuilder | This class handles the removal of undercut regions of a facet body |
| SelectFacetedBody | Represents a single object selection |
| SelectFacetedBodyList | Represents a list of objects on a selection list |
| SewFacetBodyBuilder | Represents a NXOpen::Facet::SewFacetBodyBuilder It sews two touching NX facet bodies |
| SmoothFacetBodyBuilder | Represents a NXOpen::Facet::SmoothFacetBodyBuilder |
| SnipFacetBodyBuilder | Represents a SnipFacetBody builder To create a new instance of this class, use NXOpen::Facet::FacetedBodyCollection::CreateSnipFacetBodyBuilder Default values |
| SplitCurveMethodBuilder | Represents a NXOpen::Facet::SplitCurveMethodBuilder |
| SplitCurveMethodListDataManager | Represents a NXOpen::Facet::SplitCurveMethodListDataManager |
| STLImportBuilder | The STL file import builder |
| SubdivideFacetBodyBuilder | This class provides functionality to subdivide the polygons to increase the density of the facet bodies |
| Features | Provides classes and interfaces for features |
| SheetMetal | Provides classes and interfaces for Sheet Metal Features |
| AdvancedFlange | Represents an advanced flange feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::AdvancedFlangeBuilder Created in NX11.0.0 |
| AdvancedFlangeBuilder | Represents a Sheetmetal Advanced Flange builder class |
| AeroFlangeBuilder | Represents a Aerospace Sheet Metal Flange Builder |
| AeroFlatPatternBuilder | Represents a Flat Pattern feature builder |
| AeroFlatSolidBuilder | Represents a Flat As Solid feature builder |
| AeroJoggleBuilder | Represents a Aerospace Sheet Metal Joggle Builder |
| AeroLighteningCutoutBuilder | Represents a NXOpen::Features::SheetMetal::AeroLighteningCutoutBuilder To create a new instance of this class, use NXOpen::Features::SheetMetal::AeroSheetmetalManager::CreateAeroLighteningCutoutBuilder Default values |
| AeroReformBuilder | Represents a Aerospace Sheet Metal REFORM Builder |
| AeroSheetmetalManager | Provides methods for manipulating the Knowledge Fusion rules in a part To obtain an instance of this class, refer to NXOpen::Features::FeatureCollection Created in NX4.0.0 |
| AeroUnformBuilder | Represents a Aerospace Sheet Metal UNFORM Builder |
| BeadBuilder | Represents a Bead feature builder |
| BendBuilder | Represents a Bend feature builder |
| BendListBuilder | Represents a Sheetmetal Flat Pattern bend list builder class |
| BendListItemBuilder | Represents a Sheetmetal Flat Pattern bend list item builder class |
| BendListItemBuilderList | Represents a list of objects |
| BendOptions | Represents a Sheetmetal Bend Options class |
| BendTaperBuilder | Represents a Bend Taper feature builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateBendTaperBuilder Default values |
| BreakCornerBuilder | Represents a break corner feature builder |
| BridgeTransitionBuilder | Represents a Bridge Transition builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateBridgeTransitionBuilder Created in NX5.0.2 |
| CleanUpUtilityBuilder | Represents a Clean-Up Utility builder builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateCleanUpUtilityBuilder Default values |
| ClosedCornerBuilder | Represents a Closed corner feature builder |
| ContourFlangeBuilder | Represents a Contour Flange feature builder |
| ConvertInputListItemBuilder | Represents a Sheetmetal convert to sheet metal corner list item builder class |
| ConvertInputListItemBuilderList | Represents a list of objects |
| ConvertToSheetmetalBuilder | This is the feature builder for the convert to sheetmetal feature |
| CornerTreatmentBuilder | Used to manage a builder object for a corner treatment in the flat solid and flat pattern dialogs |
| DimpleBuilder | Represents a Dimple feature builder |
| DrawnCutoutBuilder | Represents a Drawn Cutout feature builder |
| EdgeRipBuilder | Represents a Edge Rip feature builder |
| EditBendBuilder | Represents a NXOpen::Features::EditBend builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateEditBendBuilder Created in NX7.5.0 |
| EditCornerBuilder | Represents a NXOpen::Features::SheetMetal::EditCornerBuilder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateEditCornerBuilder Default values |
| ExportFlatPatternBuilder | Represents a Export flat pattern builder |
| FeatureBendPropertiesBuilder | Represents a Sheetmetal Feature bend properties builder class |
| FeatureBendPropertiesBuilderList | Represents a list of objects |
| FeatureBendPropertiesListBuilder | Represents a Sheetmetal Feature properties List builder class |
| FlangeBendPropertiesBuilder | Represents a Sheetmetal Flange Bend Properties builder class |
| FlangeBendPropertiesListBuilder | Represents a Sheetmetal Feature properties List builder class |
| FlangeBuilder | Represents a Flange feature builder |
| FlatPatternBuilder | Represents a Flat Pattern feature builder |
| FlatSolidBuilder | Represents a Flat As Solid feature builder |
| FlexibleCableBuilder | Represents a Flexible Cable feature builder |
| FlexibleCableSegment | Represents a Flexible Cable Segment class |
| GussetBuilder | Represents a NX Sheet Metal NXOpen::Features::Gusset builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateGussetBuilder Default values |
| HemFlangeBuilder | Represents a NXOpen::Features::HemFlange builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateHemFlangeFeatureBuilder Created in NX5.0.0 |
| HoleTreatmentBuilder | Used to manage a builder object for a hole treatment in the flat pattern dialogs |
| JogBuilder | Represents a Jog feature builder |
| Joggle | Represents a joggle feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::JoggleBuilder Created in NX11.0.0 |
| JoggleBuilder | Represents a Sheetmetal joggle builder class |
| JoggleInputListItemBuilder | Represents a Sheetmetal joggle input list item builder class |
| JoggleInputListItemBuilderList | Represents a list of objects |
| JoggleSideOptionsBuilder | Represents a Sheetmetal Joggle side Options class |
| LighteningCutout | Represents a lightening cutout feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::LighteningCutoutBuilder Created in NX11.0.0 |
| LighteningCutoutBuilder | Represents a Features::SheetMetal::LighteningCutout builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateLighteningCutoutBuilder Default values |
| LoftedFlangeBuilder | Represents a Lofted Flange feature builder |
| LouverBuilder | Represents a louver feature builder |
| MetaformBuilder | Represents a NXOpen::Features::Metaform builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateMetaformBuilder Default values |
| MigratedPanelBuilder | Represents an I-DEAS Migrated Panel feature builder This builder cannot be instantiated separately |
| MiterOptions | Represents a Miter Data Options builder |
| MultiBendBendPropertiesBuilder | Represents a Sheetmetal Multi Bend properties builder class |
| MultiBendBendPropertiesListBuilder | Represents a Sheetmetal Multi Bend properties List builder class |
| MultiFlange | Represents a multi flange feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::MultiFlangeBuilder Created in NX12.0.0 |
| MultiFlangeBuilder | Represents a Features::SheetMetal::MultiFlange builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateMultiFlangeBuilder Created in NX12.0.0 |
| NormalCutoutBuilder | Represents a NormalCutout feature builder |
| RebendBuilder | The Rebend feature class |
| ResizeBendAngleBuilder | Represents a NXOpen::Features::ResizeBendAngle builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateResizeBendAngleBuilder Created in NX5.0.0 |
| ResizeBendRadiusBuilder | Represents a ResizeBendRadius feature builder |
| ResizeNeutralFactorBuilder | Represents a Resize Neutral Factor Builder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateResizeNeutralFactorBuilder Created in NX5.0.0 |
| SheetmetalBaseBuilder | Represents a Sheet Metal Feature Builder to be used in the creation and modification of features |
| SheetmetalBendParameters | This structure contains the bend parameters for a Sheet Metal bend area |
| SheetmetalComponentBuilder | Represents a sheet metal component builder to be used in the creation and modification of features componenets |
| SheetMetalFromSolidBendPropertiesBuilder | Represents a Sheetmetal From Solid Bend properties builder class |
| SheetMetalFromSolidBendPropertiesBuilderList | Represents a list of objects |
| SheetMetalFromSolidBuilder | Represents a NXOpen::Features::SheetMetalFromSolid builder (Sheet Metal from Solid) |
| SheetmetalManager | Represents an object that manages sheetmetal features To obtain an instance of this class, refer to NXOpen::Features::FeatureCollection Created in NX4.0.0 |
| SMBoundaryConditionBuilder | Represents a Boundary condition object for Metaform |
| SMBoundaryConditionBuilderList | Represents a list of objects |
| SolidPunchBuilder | Represents a NXOpen::Features::SheetMetal::SolidPunchBuilder To create a new instance of this class, use NXOpen::Features::SheetMetal::SheetmetalManager::CreateSolidPunchBuilder Created in NX5.0.0 |
| TabBuilder | Represents a Tab feature builder |
| ThreeBendCornerBuilder | The Three Bend Corner feature class |
| UnbendBuilder | The Unbend feature class |
| ShipDesign | Provides classes and interfaces for Ship Design |
| GeneralArrangement | Provides classes and interfaces for Ship Design General Arrangement |
| DrawingAutomationBuilder | This builder allows you to define the general arrangement drawing automation information |
| DrawingItemBuilder | This builder allows you to define the general arrangement drawing item information |
| DrawingItemBuilderList | Represents a list of objects |
| DrawingTableItemBuilder | This builder allows you to define the general arrangement drawing table item information |
| DrawingViewItemBuilder | This builder allows you to define the general arrangement drawing view item information |
| EvacuationPlanBuilder | Represents a NXOpen::Features::ShipDesign::GeneralArrangement::EvacuationPlanBuilder builder |
| FaceCharacteristicsBuilder | Represents a builder to be used to add face characteristics attributes and color to specified faces |
| AddDataSetBuilder | This class is used to add a dataset to an item in Teamcenter To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateAddDataSetBuilder Created in NX12.0.0 |
| AlongGuideCut | Represents a corner cut feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::AlongGuideCutBuilder Created in NX8.5.0 |
| AlongGuideCutBuilder | Represents a NXOpen::Features::ShipDesign::AlongGuideCut builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateAlongGuideCutBuilder Default values |
| AnchorPoint | Represents a NXOpen::Features::ShipDesign::AnchorPoint builder |
| AnchorPointList | Represents a list of objects |
| Bracket | Represents a bracket feature |
| BracketBuilder | Represents a NXOpen::Features::ShipDesign::Bracket builder |
| BuiltUpBlockBuilder | Represents a NXOpen::Features::ShipDesign::BuiltUpBlockBuilder |
| BuiltUpManModeBuilder | This class allows you to set the NX Ship BuiltUp Profile Manufacturing Mode for one or more components |
| BuiltUpOffsetBuilder | Represents a NXOpen::Features::ShipDesign::BuiltUpOffsetBuilder .This class is for splitting ship built-up solidbodies |
| BulkHeadListItemBuilder | Represents a NXOpen::Features::ShipDesign::BulkHeadListItemBuilder |
| BulkHeadListItemBuilderList | Represents a list of objects |
| BulkHeads | Represents a bulk head feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::BulkHeadsBuilder Created in NX5.0.0 |
| BulkHeadsBuilder | Represents a NXOpen::Features::ShipDesign::BulkHeads builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateBulkHeadsBuilder Created in NX5.0.0 |
| CloneWeldsBuilder | This class is used to clone detail design welds to manufacturing |
| CollarPlate | Represents a collar plate feature |
| CollarPlateBuilder | Represents a NXOpen::Features::ShipDesign::CollarPlate builder |
| CompareModeBuilder | This class is used to compare between the two Shipbuilding modes of Design and Manufacturing |
| ConceptFromSpreadsheet | Represents a concept from spreadsheet feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ConceptFromSpreadsheetBuilder Created in NX8.5.0 |
| ConceptFromSpreadsheetBuilder | Represents a NXOpen::Features::ShipDesign::ConceptFromSpreadsheet builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateConceptFromSpreadsheetBuilder Default values |
| CopyObjectsBuilder | Represents a NXOpen::Features::ShipDesign::CopyObjectsBuilder It is used in Ship Building Application |
| CopyPasteNewBuilder | Represents a NXOpen::Features::ShipDesign::CopyPasteNewBuilder It is used in Ship Building Application |
| CornerCut | Represents a corner cut feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::CornerCutBuilder Created in NX8.5.0 |
| CornerCutBuilder | Builder used to create or edit a NXOpen::Features::ShipDesign::CornerCut feature |
| CornerCutListItemBuilder | Used to supply the list of corner cut locations and seam curves to the NXOpen::Features::ShipDesign::CornerCutBuilder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateCornerCutListitemBuilder Created in NX8.5.0 |
| CornerCutListItemBuilderList | Represents a list of objects |
| CustomBracket | Represents a custom bracket feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::CustomBracketBuilder Created in NX7.5.0 |
| CustomBracketBuilder | Represents a NXOpen::Features::ShipDesign::CustomBracket builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateCustomBracketBuilder Default values |
| Cutout2 | Represents a cutout2 feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::Cutout2Builder Created in NX8.0.0 |
| Cutout2Builder | Represents a NXOpen::Features::ShipDesign::Cutout2 builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateCutout2Builder Default values |
| CuttingSideFacesBuilder | Used to create a NXOpen::Features::ShipDesign::CuttingSideFacesBuilder which is used to attribute the cutting side, and opposing cutting side, faces on the plate bodies |
| Deck | Represents a Deck feature in Basic Design |
| DeckBuilder | This class is used to create or edit a NXOpen::Features::ShipDesign::Deck feature |
| DeckListBuilder | This builder allows you to define the general arrangement view information |
| DeckListItemBuilder | Represents a DeckListItemBuilder |
| DeckListItemBuilderList | Represents a list of objects |
| Decks | Represents a decks feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::DecksBuilder Created in NX5.0.0 |
| DecksBuilder | Represents a NXOpen::Features::ShipDesign::Decks builder |
| DeleteSeamBuilder | Used to create a NXOpen::Features::ShipDesign::DeleteSeamBuilder which is used to delete the seams from the ship structural components |
| DisplaySolidBuilder | This class is used to identify ship structure that is to have a temporary solid display built for it |
| Divide | Represents divide feature(s) To create or edit an instance of this class, use NXOpen::Features::ShipDesign::DivideBuilder Created in NX11.0.0 |
| DivideBuilder | Represents a Features::ShipDesign::Divide builder which is used to edit all divide features |
| DrawingAnnotationBuilder | This builder allows you to define the drawing annotation information |
| DrawingPartBuilder | Represents a NXOpen::Features::ShipDesign::DrawingPartBuilder |
| DrawingPartBuilderList | Represents a list of objects |
| DrawingSheetBuilder | Represents a NXOpen::Features::ShipDesign::DrawingSheetBuilder |
| DrawingSheetBuilderList | Represents a list of objects |
| DrawingTemplateBuilder | Represents a drawing template selection block Created in NX10.0.0 |
| DvToMvMapping | Represents a plate feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::DvToMvMappingBuilder Created in NX8.5.0 |
| DvToMvMappingBuilder | Represents a NXOpen::Features::ShipDesign::DvToMvMapping builder |
| EdgeCut | Represents a edge cut feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::EdgeCutBuilder Created in NX8.5.0 |
| EdgeCutBuilder | Represents a NXOpen::Features::ShipDesign::EdgeCut builder |
| EdgeReinforcement | Represents a edge reinforcement feature |
| EdgeReinforcementBuilder | Represents a NXOpen::Features::ShipDesign::EdgeReinforcement builder which is used to create or edit a edge reinforcement system feature |
| EditBoundaryBuilder | Used to create a NXOpen::Features::ShipDesign::EditBoundaryBuilder which is used to change the boundaries and split knuckle locations of profile systems |
| EditContextAttributesBuilder | Represents the class Features.ShipDesign.EditContextAttributesBuilder which is used to edit the context attributes on the basic design features |
| EditStockBuilder | Used to create a NXOpen::Features::ShipDesign::EditStockBuilder which is used to change the stock information on the basic design features |
| EditWeldingBuilder | Used to create a NXOpen::Features::ShipDesign::EditWeldingBuilder which is used to change the welding characteristics on the seams in the plate systems |
| EndCut | Represents an end cut feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::EndCutBuilder Created in NX8.0.0 |
| EndCutBuilder | Represents a NXOpen::Features::ShipDesign::EndCut builder |
| ExamineSteelFeatureBuilder | Represents the examine steel feature builder to examine steel feature |
| ExcessMaterial | Represents a excess material feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ExcessMaterialBuilder Created in NX7.5.0 |
| ExcessMaterialBuilder | Represents a NXOpen::Features::ShipDesign::ExcessMaterial builder |
| ExpansionDrawing | Represents a expansion drawing feature |
| ExpansionDrawingBuilder | Represents a NXOpen::Features::ShipDesign::ExpansionDrawingBuilder |
| ExportStructureXMLBuilder | This is to create a NXOpen::Features::ShipDesign::ExportStructureXMLBuilder which is used to export ship structure XML To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateExportStructureXmlBuilder Created in NX12.0.2 |
| FeatureParmsBuilder | This class is used to create or edit the information shared among all Ship Design features |
| FeaturesBatchOperationBuilder | Use this to cycle through the assembly components and perform the operation globally on the specified feature type |
| FeaturesToTagBuilder | This class is used to add an attribute to profile features that have been modified by the user to display a 'Metal to Metal' design 'feature' |
| FilterBuilder | A builder that allows the user to define common properties of ship objects and then add objects of similar properties to the select object list |
| FrameBarOut | Represents a FrameBarOut To create or edit an instance of this class, use NXOpen::Features::ShipDesign::FrameBarOutBuilder Created in NX5.0.0 |
| FrameBarOutBuilder | Represents a NXOpen::Features::ShipDesign::FrameBarOut builder |
| GeneralArrangementViewBuilder | This builder allows you to define the general arrangement view information |
| GenericPlateSystem | Represents a Generic Plate System feature |
| GenericPlateSystemBuilder | This class is used to create or edit a NXOpen::Features::ShipDesign::GenericPlateSystem feature |
| Hull | Represents a Hull feature |
| HullBuilder | This class is used to create or edit a NXOpen::Features::ShipDesign::Hull feature |
| ImportStructureXMLBuilder | This is to create a NXOpen::Features::ShipDesign::ImportStructureXMLBuilder which is used to import ship Structure XML To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateImportStructureXmlBuilder Created in NX12.0.2 |
| InsertFramesBuilder | Represents a NXOpen::Features::ShipDesign::InsertFramesBuilder builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateInsertFramesBuilder Created in NX5.0.0 |
| InsertSheetBody | Represents a insert sheet body feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::InsertSheetBodyBuilder Created in NX5.0.0 |
| InsertSheetBodyBuilder | Represents a NXOpen::Features::ShipDesign::InsertSheetBody builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateInsertSheetBodyBuilder Created in NX5.0.0 |
| InteractiveAnnotationBuilder | Represents a NXOpen::Features::ShipDesign::InteractiveAnnotationBuilder builder |
| InverseBendingLines | Represents a inverse bending lines feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::InverseBendingLinesBuilder Created in NX8.0.0 |
| InverseBendingLinesBuilder | Used to create or edit a NXOpen::Features::ShipDesign::InverseBendingLines feature |
| ItFrameListItemBuilder | Represents a NXOpen::Features::ShipDesign::ItFrameListItemBuilder |
| ItFrameListItemBuilderList | Represents a list of objects |
| ItFrames | Represents a Inter Transverse Frame feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ItFramesBuilder Created in NX5.0.0 |
| ItFramesBuilder | Represents a NXOpen::Features::ShipDesign::ItFrames builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateItFramesBuilder Created in NX5.0.0 |
| KnuckledProfiles | Represents a knuckled profiles manufacturing preparation feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::KnuckledProfilesBuilder Created in NX5.0.3 |
| KnuckledProfilesBuilder | Represents a NXOpen::Features::ShipDesign::KnuckledProfiles builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateKnuckledProfilesBuilder Created in NX5.0.3 |
| LabellingRoomsBuilder | Represents a Features::ShipDesign::LabellingRoomsBuilder builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateLabellingRoomsBuilder Created in NX12.0.0 |
| LongitudinalBulkhead | Represents a Longitudinal Bulkhead feature |
| LongitudinalBulkheadBuilder | This class is used to create or edit a NXOpen::Features::ShipDesign::LongitudinalBulkhead feature |
| MainDimensions | Represents a main dimensions feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::MainDimensionsBuilder Created in NX5.0.0 |
| MainDimensionsBuilder | Represents a NXOpen::Features::ShipDesign::MainDimensions builder |
| ManufacturingAssemblyNavigatorBuilder | This class is used to define Manufacturing Assembly Structure |
| ManufacturingDataBuilder | This class is used to generate Manufacturing data |
| ManufacturingOut | Represents a ManufacturingOut To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ManufacturingOutBuilder Created in NX5.0.0 |
| ManufacturingOutBuilder | Represents a NXOpen::Features::ShipDesign::ManufacturingOut builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateManufacturingOutBuilder Created in NX5.0.0 |
| ManufacturingPreparation | Represents a manufacturing preparation feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ManufacturingPreparationBuilder Created in NX8.0.2 |
| ManufacturingPreparationBuilder | This builder is used to adds attributes to the part and body identifying manufacturing related data |
| ManufacturingStockBuilder | Represents a NXOpen::Features::ShipDesign::ManufacturingStockBuilder builder |
| MarkingLine | Represents a marking line feature |
| MarkingLineBuilder | Represents a MarkingLine Feature builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateMarkingLineBuilder Created in NX5.0.0 |
| MarkingLineDesign | Represents a marking line feature |
| MarkingLineDesignBuilder | Represents a new MarkingLine Feature builder |
| MarkInsulationAreaBuilder | Represents a mark insulation area builder for ship |
| MaterialAllowanceBuilder | Represents the material allowance feature builder to examine steel feature |
| MaterialEstimationBuilder | Represents the class Features.ShipDesign.MaterialEstimationBuilder which is used to calculate the material estimation information |
| MirrorShipStructureBuilder | Copy the selected parts (components) about the Mirror Plane with full model history and feature data |
| MoveToContainerBuilder | This class is used to move detail design parts to a new ship container |
| OrientationAngleMethodsBuilder | This class defines the method of angle definition used in the definition of the region's orientation |
| OrientationDefinition | Represents a Orientation SubObject |
| OrientationDefinitionBuilder | This class defines the top level object for use in definining the orientation of stiffeners and edge reinforcements |
| OrientationPointMethodsBuilder | This class is used to define the boundary of the regions when definining the orientation of a profile |
| OrientationRegionItemBuilder | This class defines each region of the orientation |
| OrientationRegionItemBuilderList | Represents a list of objects |
| PenetrationAssociationBuilder | Represents a NXOpen::Features::ShipDesign::PenetrationAssociationBuilder builder To create a new instance of this class, use NXOpen::Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationAssociationBuilder Created in NX8.0.0 |
| PenetrationAttachment | Represents the Penetration Attachment object |
| PenetrationCutoutBuilder | Represents a NXOpen::Features::ShipDesign::PenetrationRequest builder To create a new instance of this class, use NXOpen::Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationCutoutBuilder Default values |
| PenetrationFolder | Represents the Penetration Folder object |
| PenetrationList | Represents the Penetration List object |
| PenetrationManager | Contains the collection objects for creating and iterating over Penetration Request Properties objects |
| PenetrationRequest | Represents the Penetration Request object |
| PenetrationRequestBuilder | Represents a NXOpen::Features::ShipDesign::PenetrationRequest builder To create a new instance of this class, use NXOpen::Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationRequestBuilder Default values |
| PenetrationRequestCollection | Represents a NXOpen::Mechatronics::FunctionObjectCollection To obtain an instance of this class, refer to NXOpen::Features::ShipDesign::PenetrationManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PenetrationRequestForCutoutBuilder | Represents a Features::ShipDesign::PenetrationRequest builder To create a new instance of this class, use NXOpen::Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationRequestForCutoutBuilder Created in NX8.5.0 |
| PenetrationReviewRequestBuilder | Represents a Features::ShipDesign::PenetrationRequest builder To create a new instance of this class, use NXOpen::Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationReviewRequestBuilder Created in NX8.0.0 |
| PenetrationSite | Represents the Penetration Site object |
| PenetrationUtils | Contains various penetration utility methods To obtain an instance of this class, refer to NXOpen::Features::ShipDesign::PenetrationManager Created in NX8.0.0 |
| Pillar | Represents a Pillar feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::PillarBuilder Created in NX8.0.0 |
| PillarBuilder | Represents a NXOpen::Features::ShipDesign::Pillar builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreatePillarBuilder Default values |
| PillarSystem | Represents a pillar system feature |
| PillarSystemBuilder | Represents a NXOpen::Features::ShipDesign::PillarSystem builder which is used to create or edit a pillar system feature |
| PillarTreatmentBlockBuilder | Used to create a NXOpen::Features::ShipDesign::PillarTreatmentBlockBuilder which is used to change the details of end cut and cap for pillar system |
| PinJig | Represents a Pinjig feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::PinJigBuilder Created in NX10.0.0 |
| PinJigBuilder | Represents a NXOpen::Features::ShipDesign::PinJig builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreatePinJigBuilder Created in NX10.0.0 |
| PinjigDrawingBuilder | This builder allows you to define the pinjig information |
| PlaneListBuilder | This class is used to place a plane into a list |
| PlaneListBuilderList | Represents a list of objects |
| PlanePairBuilder | This class is used to define a pair of planes in a list |
| Plate | Represents a plate feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::PlateBuilder Created in NX8.0.0 |
| PlateBoundaryOptionBuilder | Represents a NXOpen::Features::ShipDesign::PlateBoundaryOptionBuilder builder to define the plate boundary option |
| PlateBoundaryOptionBuilderList | Represents a list of objects |
| PlateBuilder | Represents a NXOpen::Features::ShipDesign::Plate builder |
| PlateChamfer | Represents a plate chamfer feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::PlateChamferBuilder Created in NX8.0.0 |
| PlateChamferBuilder | Represents a NXOpen::Features::ShipDesign::PlateChamfer builder |
| PlateDivide | Represents a plate divide feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::PlateDivideBuilder Created in NX11.0.0 |
| PlateDivideBuilder | Represents a Features::ShipDesign::PlateDivide builder which is used to edit a plate divide feature |
| PlatePreparation | Represents a ship plate preparation feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::PlatePreparationBuilder Created in NX8.0.0 |
| PlatePreparationBuilder | Used to create or edit a NXOpen::Features::ShipDesign::PlatePreparation feature |
| PlateStockBuilder | This builder allows you to define the stock information for plate system features in ship design |
| PlateSystem | Represents a Plate System feature |
| PlateSystemBuilder | This class is used to create or edit the information shared between all the Basic Design plate system features in the Ship Design application |
| PointDimBuilder | This class is used to define a point with dimension list element |
| PointDimBuilderList | Represents a list of objects |
| PointPairBuilder | This class is used to define a pair of points in a list |
| Profile | Represents a profile feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ProfileBuilder Created in NX7.5.0 |
| ProfileBuilder | Represents a NXOpen::Features::ShipDesign::Profile builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateProfileBuilder Default values |
| ProfileCutout | Represents a profile cutout feature for NX8 |
| ProfileCutoutBuilder | Represents a NXOpen::Features::ShipDesign::ProfileCutout builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateProfileCutoutBuilder Default values |
| ProfileList | Represents a profile list feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ProfileListBuilder Created in NX5.0.0 |
| ProfileListBuilder | Represents a NXOpen::Features::ShipDesign::ProfileList builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateProfileListBuilder Created in NX5.0.0 |
| ProfileSystem | Represents a profile system feature |
| ProfileSystemBuilder | This class is used to create or edit the information shared between all the Basic Design profile system features in the Ship Design application |
| ProfileTransition | Represents a profile transition feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ProfileTransitionBuilder Created in NX9.0.0 |
| ProfileTransitionBuilder | Builder used to create or edit a NXOpen::Features::ShipDesign::ProfileTransition feature |
| ProjectSetupBuilder | Represents a project setup builder for ship |
| ProjectStructureNode | Represents a project structure node for ship project setup |
| QualifySketchBuilder | Represents a NXOpen::Features::ShipDesign::QualifySketchBuilder builder |
| ReadDataSetBuilder | This class will read a data set file from Team Center Created in NX8.5.0 |
| RebaseBuilder | This class is used to synchronize the end cuts from the ones in mfg group to design group |
| ReferenceLine | Represents a reference line feature |
| ReferenceLineBuilder | Represents a NXOpen::Features::ShipDesign::ReferenceLine builder |
| RemoveSplitBuilder | Represents a NXOpen::Features::ShipDesign::RemoveSplitBuilder .This class is for removing split features |
| ReverseSplitBuilder | This class is used to provide the capability to reverse the split interaction between ship structures |
| RollingLine | Represents a rolling line feature |
| RollingLineBuilder | Represents a NXOpen::Features::ShipDesign::RollingLine builder |
| RoomAttributeListBuilder | The builder to define room attributes Created in NX12.0.0 |
| RoomAttributesBuilder | Represents a NXOpen::Features::ShipDesign::RoomAttributesBuilder It is used in Ship General Arrangement Application |
| RoomBuilder | Represents a room builder for general arrangement |
| RoomContainerBuilder | Represents a Features::ShipDesign::RoomContainerBuilder builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateRoomContainerBuilder Created in NX12.0.0 |
| RoomPanelBuilder | Represents a Features::ShipDesign::RoomPanelBuilder builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateRoomPanelBuilder Default values |
| RoomThicknessItemBuilder | Represents a NXOpen::Features::ShipDesign::RoomThicknessItemBuilder |
| RoomThicknessItemBuilderList | Represents a list of objects |
| Seam | Represents a ship design seam feature |
| SeamBlockBuilder | Represents a NXOpen::Features::ShipDesign::SeamBlockBuilder To create a new instance of this class, use NXOpen::Features::ShipDesign::BuiltUpBlockBuilder::CreateSeamBlockBuilder Created in NX9.0.0 |
| SeamBlockBuilderList | Represents a list of objects |
| SeamBuilder | A NXOpen::Features::ShipDesign::SeamBuilder used to create or edit a ship design NXOpen::Features::ShipDesign::Seam feature |
| SectionDrawingBuilder | This builder allows you to define the section drawing information |
| SectionEditorBuilder | Represents a NXOpen::Features::ShipDesign::SectionEditorBuilder builder |
| SectionViewBuilder | It represents NXOpen::Features::ShipDesign::SectionViewBuilder |
| SectionViewBuilderList | Represents a list of objects |
| SelectPartBuilder | Represents a NXOpen::Features::ShipDesign::SelectPartBuilder |
| SelectStructuresBuilder | This builder allows you to select structures in NXOpen::Features::ShipDesign::GeneralArrangementViewBuilder |
| SelectViewBuilder | Represents a select view builder for ship |
| SetModeBuilder | This class is used to set the mode to design or manufacturing |
| ShellExpansion | Represents a shell expansion feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ShellExpansionBuilder Created in NX7.5.0 |
| ShellExpansionBuilder | Represents a NXOpen::Features::ShipDesign::ShellExpansion builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShellExpansionBuilder Default values |
| ShellTemplate | Represents a shell template feature |
| ShellTemplateBuilder | Used to edit or create a NXOpen::Features::ShipDesign::ShellTemplate feature |
| ShipAttributeHolder | Represents a NXOpen::Features::ShipDesign::ShipAttributeHolder builder This is an abstract class |
| ShipContainerBuilder | This class is used to specify the "container" part for the Ship Structures application, i.e., that part that should have newly created Ship Stiffeners, Plates, Standard Parts added to it as assembly components |
| ShipCoordinates | Represents a ship coordinates feature Ship Coordinates is not supported in KF |
| ShipCoordinatesBuilder | Represents a NXOpen::Features::ShipDesign::ShipCoordinates builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShipCoordinatesBuilder Default values |
| ShipCutout | Represents a ship cutout feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ShipCutoutBuilder Created in NX7.5.0 |
| ShipCutoutBuilder | Represents a NXOpen::Features::ShipDesign::ShipCutout builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShipCutoutBuilder Default values |
| ShipDesignPreferencesBuilder | Represents a NXOpen::Features::ShipDesign::ShipDesignPreferencesBuilder which is used to change default object display settings for ship structures |
| ShipDesignVersionUpBuilder | Represents a NXOpen::Features::ShipDesign::ShipDesignVersionUpBuilder builder |
| ShipEndCut | Represents a ship end cut feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ShipEndCutBuilder Created in NX7.5.0 |
| ShipEndCutBuilder | Represents a NXOpen::Features::ShipDesign::ShipEndCut builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShipEndCutBuilder Default values |
| ShipFeatureConverter | This class is used to convert/upgrade legacy Ship Design features |
| ShipFlatPattern | Represents a ship flat pattern feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ShipFlatPatternBuilder |
| ShipFlatPatternBuilder | Represents a NXOpen::Features::ShipDesign::ShipFlatPattern builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShipFlatPatternBuilder |
| ShipIntersections | Represents a ship intersection feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ShipIntersectionsBuilder Created in NX7.5.0 |
| ShipIntersectionsBuilder | Represents a NXOpen::Features::ShipDesign::ShipIntersections builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShipIntersectionsBuilder Default values |
| ShipNameFieldBuilder | A field, combined with other fields, to generate a name for a Ship Basic Design Object such as a Deck |
| ShipNamesBuilder | This class provides the mechanism for defining the names of Basic Design objects such as Decks, Bulkheads, Stiffener Systems, etc |
| ShipNamesBuilderList | Represents a list of objects |
| ShipNamesListBuilder | This class provides a list of NXOpen::Features::ShipDesign::ShipNamesBuilder objects |
| ShipPreparationBuilder | Creates a builder used to prepare basic design data for meshing |
| ShipPreparationInfo | Used to interrogate and change the processing within the NXOpen::Features::ShipDesign::ShipPreparationBuilder |
| ShipProfileCutout | Represents a profile cutout feature for NX75 using sketch expression modifier block |
| ShipProfileCutoutBuilder | Represents a NXOpen::Features::ShipDesign::ProfileCutout builder for editing legacy(NX75) profile cutout feature |
| ShipSection | Represents a ship section feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ShipSectionBuilder Created in NX7.5.0 |
| ShipSectionBuilder | Represents a NXOpen::Features::ShipDesign::ShipSection builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShipSectionBuilder Default values |
| ShipStructureBuilder | Represents a NXOpen::Features::ShipDesign::ShipStructureBuilder |
| ShipTrimBody | Represents a ship trim body feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::ShipTrimBodyBuilder Created in NX9.0.1 |
| ShipTrimBodyBuilder | Represents a NXOpen::Features::ShipDesign::ShipTrimBodyBuilder |
| SmartRule | Represents a smart rule feature |
| SmartRuleBuilder | Represents a NXOpen::Features::ShipDesign::SmartRule builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateSmartRuleBuilder Created in NX8.0.0 |
| SplitProfilePlateBuilder | Represents a NXOpen::Features::ShipDesign::SplitProfilePlateBuilder .This class is for splitting ship profile/plate solidbodies To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateSplitProfilePlateBuilder Default values |
| SplitStandardPart | Represents a split standard part feature |
| SplitStandardPartBuilder | Represents a NXOpen::Features::ShipDesign::SplitStandardPartBuilder .This class is for splitting ship standard part To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateSplitStandardPartBuilder Default values |
| StandardPart | Represents a standard part feature |
| StandardPartFrameworkBuilder | Represents the standard part framework builder to add or edit ship standard part |
| StandardPartItemBuilder | Represents the ship standard part item builder |
| StandardPartItemBuilderList | Represents a list of objects |
| StandardPartSCAssist | Represents To create or edit an instance of this class, use NXOpen::Features::ShipDesign::StandardPartFrameworkBuilder Created in NX9.0.0 |
| SteelCollarPlate | Represents a collar plate steel feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::SteelCollarPlateBuilder Created in NX7.5.0 |
| SteelCollarPlateBuilder | Represents a NXOpen::Features::ShipDesign::SteelCollarPlate builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateSteelCollarPlateBuilder Default values |
| SteelDistribution | Represents a steel distribution feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::SteelDistributionBuilder Created in NX5.0.0 |
| SteelDistributionBuilder | Represents a NXOpen::Features::ShipDesign::SteelDistribution builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateSteelDistributionBuilder Created in NX5.0.0 |
| SteelFeatureSpreadsheetBuilder | Represents a NXOpen::Features::ShipDesign::SteelFeatureSpreadsheetBuilder builder |
| SteelInsulation | Represents a steel insulation feature |
| SteelInsulationBoundaryBuilder | Represents a Steel Insulation Boundary builder |
| SteelInsulationBoundaryBuilderList | Represents a list of objects |
| SteelInsulationBuilder | Represents a builder that is used to create or edit a NXOpen::Features::ShipDesign::SteelInsulation feature |
| SteelSupport | Represents a steel support feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::SteelSupportBuilder Created in NX7.5.0 |
| SteelSupportBuilder | Represents a NXOpen::Features::ShipDesign::SteelSupport builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateSteelSupportBuilder Default values |
| SteelVentHoles | Represents a ship vent holes feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::SteelVentHolesBuilder Created in NX7.5.0 |
| SteelVentHolesBuilder | Represents a NXOpen::Features::ShipDesign::SteelVentHoles builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateSteelVentHolesBuilder Default values |
| Stiffener | Represents a stiffener feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::StiffenerBuilder Created in NX8.0.0 |
| StiffenerBuilder | Represents a NXOpen::Features::ShipDesign::Stiffener builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateStiffenerBuilder Default values |
| StiffenerBySupportPathBuilder | This class defines the builder to collect stiffener by support path data for Stiffener feature |
| StiffenerLimitBuilder | This class defines the path limit method used by a Stiffener or Edge Reinforcement feature |
| StiffenerStockBuilder | This class defines the Profile or Plate stock for a Stiffener or Edge Reinforcement feature |
| StiffenerSystem | Represents a stiffener system feature |
| StiffenerSystemBuilder | This class is used to create or edit a NXOpen::Features::ShipDesign::StiffenerSystem feature |
| SubSystemBuilder | This class is used to edit the Sub System Definition of a NXOpen::Features::ShipDesign::SubSystems feature |
| SubSystemBuilderList | Represents a list of objects |
| SubSystems | Represents a sub systems feature |
| SubSystemsBuilder | This class is used to edit a NXOpen::Features::ShipDesign::SubSystems feature |
| SynchronizeDesignViewBuilder | This class is used to synchronize body features from design view to manufacturing view |
| ThicknessDirectionBuilder | This class allows you to define the thickness direction for plate system features in Ship Basic Design and and for grid planes in Ship Concept Design |
| TraceLines | Represents a trace lines feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::TraceLinesBuilder Created in NX7.5.0 |
| TraceLinesBuilder | Represents a NXOpen::Features::ShipDesign::TraceLines builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateTraceLinesBuilder Default values |
| TransFrame | Represents a TransVerse Frame feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::TransFrameBuilder Created in NX5.0.0 |
| TransFrameBuilder | Represents a NXOpen::Features::ShipDesign::TransFrame builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateTransFrameBuilder Created in NX5.0.0 |
| TransFrameListItemBuilder | Represents a NXOpen::Features::ShipDesign::TransFrameListItemBuilder |
| TransFrameListItemBuilderList | Represents a list of objects |
| TransitionBuilder | This is to create a NXOpen::Features::ShipDesign::TransitionBuilder which is used to create Detail Design elements from Basic Design elements |
| TransverseBulkhead | Represents a Transverse Bulkhead feature |
| TransverseBulkheadBuilder | This class is used to create or edit a NXOpen::Features::ShipDesign::TransverseBulkhead feature |
| UnfoldedMinRecBuilder | Represents the class Features.ShipDesign.UnfoldedMinRecBuilder which is used to calculate the unfolded minimum rectangle of ship basic design plates or standard parts |
| UpdateShipLibrary | Represents a update ship library feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::UpdateShipLibraryBuilder Created in NX5.3.0 |
| UpdateShipLibraryBuilder | Represents a NXOpen::Features::ShipDesign::UpdateShipLibrary builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateUpdateShipLibraryBuilder Default values |
| ValidateModelBuilder | This is to create a NXOpen::Features::ShipDesign::ValidateModelBuilder which is used to validate Basic Design Structures |
| VentHolesMarking | Represents a vent holes marking feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::VentHolesMarkingBuilder Created in NX5.0.3 |
| VentHolesMarkingBuilder | Represents a NXOpen::Features::ShipDesign::VentHolesMarking builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateVentHolesMarkingBuilder Created in NX5.0.3 |
| VentilationHoles2 | Represents a ventilation holes2 feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::VentilationHoles2Builder Created in NX8.0.0 |
| VentilationHoles2Builder | Represents a NXOpen::Features::ShipDesign::VentilationHoles2 builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateVentilationHoles2Builder Default values |
| VerifyPenetrationBuilder | Represents a NXOpen::Features::ShipDesign::VerifyPenetrationBuilder builder To create a new instance of this class, use NXOpen::Features::ShipDesign::PenetrationRequestCollection::CreateVerifyPenetrationBuilder Created in NX8.5.0 |
| WeightAndCGBuilder | Represents the class Features.ShipDesign.WeightAndCGBuilder which is used to calculate the weight and cg information |
| WeldCut | Represents a weld cut feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::WeldCutBuilder Created in NX7.5.0 |
| WeldCut2 | Represents a weld cut2 feature To create or edit an instance of this class, use NXOpen::Features::ShipDesign::WeldCut2Builder Created in NX8.0.1 |
| WeldCut2Builder | Represents a NXOpen::Features::ShipDesign::WeldCut2 builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateWeldCut2Builder Default values |
| WeldCutBuilder | Represents a NXOpen::Features::ShipDesign::WeldCut builder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateWeldCutBuilder Default values |
| YFrameBuilder | Represents a NXOpen::Features::ShipDesign::YFrameBuilder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateYFrameBuilder Created in NX5.0.0 |
| ZFrameBuilder | Represents a NXOpen::Features::ShipDesign::ZFrameBuilder To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateZFrameBuilder Created in NX5.0.0 |
| Subdivision | Provides classes and interfaces for Subdivision Body feature |
| CageManipulatorData | Subdivision cage manipulation tool |
| ObjectMoveData | Contains object movement information |
| ObjectSelectionData | Contains object selection information |
| CagePolylineBuilder | Cage polyline builder class |
| CageSectionData | Represents subdivision cage section selection |
| CageSectionDataList | Represents a list of objects |
| CopyCageBuilder | Represents a NXOpen::Features::Subdivision::CopyCageBuilder builder |
| CopyCageData | Represents a NXOpen::Features::Subdivision::CopyCageData |
| DefineWorkRegionBuilder | Represents a Features::Subdivision::DefineWorkRegionBuilder builder |
| DeleteConstraintBuilder | Represents a NXOpen::Features::Subdivision::DeleteConstraintBuilder builder |
| ExportSubdivisionGeometryBuilder | Represents a NXOpen::Features::Subdivision::ExportSubdivisionGeometryBuilder builder |
| ExtractCagePolylineBuilder | Extract cage polyline builder class |
| ImportSubdivisionGeometryBuilder | Represents a NXOpen::Features::Subdivision::ImportSubdivisionGeometryBuilder builder |
| MergeSubdivisionBodiesBuilder | Represents a Features::Subdivision::MergeSubdivisionBodiesBuilder builder |
| MirrorCageBuilder | Represents a NXOpen::Features::Subdivision::MirrorCageBuilder builder |
| OffsetCageBuilder | Represents a NXOpen::Features::Subdivision::OffsetCageBuilder builder |
| PasteCageData | Represents a NXOpen::Features::Subdivision::PasteCageData builder |
| SelectCageObjectData | Represents subdivision cage topology object selection |
| SelectSubdivisionBodyList | Represents a list of objects on a selection list |
| SplitSubdivisionBodyBuilder | Represents a Features::Subdivision::SplitSubdivisionBodyBuilder builder |
| StartSymmetricModelingBuilder | Represents a NXOpen::Features::Subdivision::StartSymmetricModelingBuilder builder To create a new instance of this class, use NXOpen::Features::Subdivision::SubdivisionBodyCollection::CreateStartSymmetricModelingBuilder Created in NX9.0.0 |
| SubdivisionBody | Represents a subdivision body feature |
| SubdivisionBodyCollection | Represents a collection of subdivision body feature tools |
| iterator | Iterator for accessing the contents of the collection |
| SubdivisionBridgeFaceBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionBridgeFaceBuilder builder |
| SubdivisionConnectCageBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionConnectCageBuilder builder |
| SubdivisionDeleteCageBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionDeleteCageBuilder builder |
| SubdivisionDeleteFaceBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionDeleteFaceBuilder builder |
| SubdivisionDeleteObjectBuilder | Represents a Features::Subdivision::SubdivisionDeleteObjectBuilder builder |
| SubdivisionExtrudeCageBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionExtrudeCageBuilder builder |
| SubdivisionFillBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionFillBuilder builder |
| SubdivisionLoftBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionLoftBuilder builder |
| SubdivisionMergeFaceBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionMergeFaceBuilder builder |
| SubdivisionPrimitiveShapeBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionPrimitiveShapeBuilder builder |
| SubdivisionPrimitiveShapeBuilderEx | Represents a Features::Subdivision::SubdivisionPrimitiveShapeBuilderEx builder |
| SubdivisionProjectCageBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionProjectCageBuilder builder To create a new instance of this class, use NXOpen::Features::Subdivision::SubdivisionBodyCollection::CreateSubdivisionProjectCageBuilder Default values |
| SubdivisionRevolveBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionRevolveBuilder builder |
| SubdivisionSetContinuityBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionSetContinuityBuilder builder |
| SubdivisionSetWeightBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionSetWeightBuilder builder |
| SubdivisionSewCageBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionSewCageBuilder builder To create a new instance of this class, use NXOpen::Features::Subdivision::SubdivisionBodyCollection::CreateSubdivisionSewCageBuilder Created in NX10.0.0 |
| SubdivisionSplitFaceBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionSplitFaceBuilder builder |
| SubdivisionSubdivideFaceBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionSubdivideFaceBuilder builder |
| SubdivisionSweepBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionSweepBuilder builder |
| SubdivisionTubeBuilder | Represents a NXOpen::Features::Subdivision::SubdivisionTubeBuilder builder |
| TransformCageData | Represents a NXOpen::Features::Subdivision::TransformCageData builder |
| VehicleDesign | Provides classes and interfaces for Vehicle Design |
| AllAroundVision | Represents an all-around vision feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::AllAroundVisionBuilder Created in NX8.5.0 |
| AllAroundVisionBuilder | A NXOpen::Features::VehicleDesign::AllAroundVisionBuilder used to create or edit a vehicle design NXOpen::Features::VehicleDesign::AllAroundVision feature |
| BaseDataBuilder | Represents a NXOpen::Features::VehicleDesign::BaseDataBuilder |
| BaseDataDriverBuilder | Represents a NXOpen::Features::VehicleDesign::BaseDataDriverBuilder |
| BaseDataImportExportBuilder | Represents a NXOpen::Features::VehicleDesign::BaseDataImportExportBuilder builder used to import and export expressions from and to a spreadsheet |
| BaseDataLoadingBuilder | Represents a NXOpen::Features::VehicleDesign::BaseDataLoadingBuilder |
| BaseDataLoadingWheelBuilder | Represents a NXOpen::Features::VehicleDesign::BaseDataLoadingWheelBuilder |
| BaseDataPassengerBuilder | Represents a NXOpen::Features::VehicleDesign::BaseDataPassengerBuilder |
| BaseDataSourceBuilder | Represents a NXOpen::Features::VehicleDesign::BaseDataSourceBuilder builder, which set the base data source for work part in assembly context |
| BaseDataWheelBuilder | Represents a NXOpen::Features::VehicleDesign::BaseDataWheelBuilder |
| BumperPendulum | Represents a bumper pendulum feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::BumperPendulumBuilder Created in NX8.5.0 |
| BumperPendulumBuilder | Represents a NXOpen::Features::VehicleDesign::BumperPendulum builder To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateBumperPendulumBuilder Default values |
| CloseRangeBlindVolumeListItemBuilder | Represents the builder to create blind volume list item used for close range visibility |
| CloseRangeCameraListItemBuilder | Represents the builder to create camera list item used for close range visibility |
| CloseRangeCameraListItemBuilderList | Represents a list of objects |
| CloseRangeDemoCylinderListItemBuilder | Represents the builder to create demo cylinder list item used for close range visibility |
| CloseRangeDemoCylinderListItemBuilderList | Represents a list of objects |
| CloseRangeVisibility | Represents a close range visibility feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::CloseRangeVisibilityBuilder Created in NX8.5.0 |
| CloseRangeVisibilityBuilder | The builder to create close range visibility feature |
| CrashBarrier | Represents a crash barrier feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::CrashBarrierBuilder Created in NX8.5.0 |
| CrashBarrierBuilder | Represents a NXOpen::Features::VehicleDesign::CrashBarrier builder to create and edit a vehicle design crash barrier |
| DynamicCurb | Represents a dynamic curb feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::DynamicCurbBuilder Created in NX8.5.0 |
| DynamicCurbBuilder | Represents a NXOpen::Features::VehicleDesign::DynamicCurb builder To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateDynamicCurbBuilder Default values |
| GroundClearance | Represents a ground clearance feature |
| GroundClearanceBuilder | Represents a NXOpen::Features::VehicleDesign::GroundClearance builder |
| HeadImpact | Represents a head impact feature |
| HeadImpactAPillar | Represents a head impact a-pillar feature |
| HeadImpactAPillarBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactAPillarBuilder |
| HeadImpactAPillarDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactAPillarDetailBuilder |
| HeadImpactAPillarWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactAPillarWizardBuilder |
| HeadImpactBPillar | Represents a head impact b-pillar feature |
| HeadImpactBPillarBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactBPillarBuilder |
| HeadImpactBPillarDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactBPillarDetailBuilder |
| HeadImpactBPillarWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactBPillarWizardBuilder |
| HeadImpactBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactBuilder |
| HeadImpactFrontHeader | Represents a head impact front header feature |
| HeadImpactFrontHeaderBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactFrontHeaderBuilder |
| HeadImpactFrontHeaderDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactFrontHeaderDetailBuilder |
| HeadImpactFrontHeaderWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactFrontHeaderWizardBuilder |
| HeadImpactOPillar | Represents a head impact side rail feature |
| HeadImpactOPillarBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactOPillarBuilder |
| HeadImpactOPillarDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactOPillarDetailBuilder |
| HeadImpactOPillarWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactOPillarWizardBuilder |
| HeadImpactOtherRail | Represents a head impact additional side rail feature |
| HeadImpactOtherRailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactOtherRailBuilder |
| HeadImpactOtherRailDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactOtherRailDetailBuilder |
| HeadImpactOtherRailWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactOtherRailWizardBuilder |
| HeadImpactRearHeader | Represents a head impact rear header feature |
| HeadImpactRearHeaderBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactRearHeaderBuilder |
| HeadImpactRearHeaderDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactRearHeaderDetailBuilder |
| HeadImpactRearHeaderWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactRearHeaderWizardBuilder |
| HeadImpactRPillar | Represents a head impact rear pillar feature |
| HeadImpactRPillarBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactRPillarBuilder |
| HeadImpactRPillarDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactRPillarDetailBuilder |
| HeadImpactRPillarWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactRPillarWizardBuilder |
| HeadImpactSideRail | Represents a head impact side rail feature |
| HeadImpactSideRailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactSideRailBuilder |
| HeadImpactSideRailDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactSideRailDetailBuilder |
| HeadImpactSideRailWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactSideRailWizardBuilder |
| HeadImpactUpperRoof | Represents a head impact upper roof feature |
| HeadImpactUpperRoofBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactUpperRoofBuilder |
| HeadImpactUpperRoofDetailBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactUpperRoofDetailBuilder |
| HeadImpactUpperRoofWizardBuilder | Represents a NXOpen::Features::VehicleDesign::HeadImpactUpperRoofWizardBuilder |
| HoodVisibility | Represents a hood visibility spline feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::HoodVisibilityBuilder Created in NX6.0.0 |
| HoodVisibilityBuilder | Represents a NXOpen::Features::VehicleDesign::HoodVisibility builder To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateHoodVisibilityBuilder Default values |
| InnerAngle | Represents an inner angle feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::InnerAngleBuilder Created in NX8.5.0 |
| InnerAngleBuilder | Represents a NXOpen::Features::VehicleDesign::InnerAngle builder, used to create or edit inner angle feature |
| Manikin | Represents a manikin automotive feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::ManikinBuilder Created in NX7.5.0 |
| ManikinBuilder | Represents a NXOpen::Features::VehicleDesign::Manikin builder To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateManikinBuilder Default values |
| MirrorCertification | Represents a mirror certification feature |
| MirrorCertificationBuilder | A NXOpen::Features::VehicleDesign::MirrorCertificationBuilder used to create or edit a vehicle design NXOpen::Features::VehicleDesign::MirrorCertification feature |
| OilPan | Represents a oil pan feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::OilPanBuilder Created in NX8.5.0 |
| OilPanBuilder | Represents a NXOpen::Features::VehicleDesign::OilPan builder to create and edit a vehicle design oil pan |
| PedestrianProtection | Represents a pedestrian protection feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::PedestrianProtectionBuilder Created in NX6.0.0 |
| PedestrianProtectionBuilder | Represents a NXOpen::Features::VehicleDesign::PedestrianProtection builder To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreatePedestrianProtectionBuilder Default values |
| PendulumPlacementBuilder | This builder allows you to define the pendulum placement information for bumper pendulum features in vehicle design |
| ReflectionData | Represents a reflection data feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::ReflectionDataBuilder Created in NX6.0.0 |
| ReflectionDataBuilder | Represents a NXOpen::Features::VehicleDesign::ReflectionData builder To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateReflectionDataBuilder Default values |
| SeatBeltAnchorage | Represents a seat belt anchorage feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::SeatBeltAnchorageBuilder Created in NX6.0.0 |
| SeatBeltAnchorageBuilder | Represents a Features::VehicleDesign::SeatBeltAnchorage builder To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateSeatBeltAnchorageBuilder Default values |
| Slope | Represents a Slope feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::SlopeBuilder Created in NX8.5.0 |
| SlopeBuilder | The builder to create slope feature |
| StaticCurb | Represents a static curb feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::StaticCurbBuilder Created in NX8.5.0 |
| StaticCurbBuilder | Represents a NXOpen::Features::VehicleDesign::StaticCurb builder used to create or edit static curb feature To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateStaticCurbBuilder Default values |
| TireEnvelope | Represents a tire envelope feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::TireEnvelopeBuilder Created in NX7.5.0 |
| TireEnvelopeBuilder | Represents a builder that is used to edit or create a NXOpen::Features::VehicleDesign::TireEnvelope |
| VehicleCoordinateSystem | Represents a vehicle coordinate system feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::VehicleCoordinateSystemBuilder Created in NX7.0.0 |
| VehicleCoordinateSystemBuilder | Represents a NXOpen::Features::VehicleDesign::VehicleCoordinateSystem builder To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateVehicleCoordinateSystemBuilder Created in NX7.0.0 |
| VisionPlane | Represents a vision plane feature |
| VisionPlaneBuilder | Represents a NXOpen::Features::VehicleDesign::VisionPlane builder used to create or edit a Vision Plane |
| WheelCovering | Represents a wheel covering feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::WheelCoveringBuilder Created in NX8.5.0 |
| WheelCoveringBuilder | Represents a NXOpen::Features::VehicleDesign::WheelCovering feature builder for wheel covering surface section checking |
| WheelFixing | Represents a wheel fixing feature To create or edit an instance of this class, use NXOpen::Features::VehicleDesign::WheelFixingBuilder Created in NX8.5.0 |
| WheelFixingBuilder | Represents a NXOpen::Features::VehicleDesign::WheelFixing builder used to create or edit a vehicle design wheel fixing |
| WindshieldDatum | Represents a windshield datum feature |
| WindshieldDatumBuilder | Represents a NXOpen::Features::VehicleDesign::WindshieldDatum builder used to create or edit a Windshield Datum |
| AdaptiveShell | Represents a adaptive shell feature To create or edit an instance of this class, use NXOpen::Features::AdaptiveShellBuilder Created in NX6.0.0 |
| AdaptiveShellBuilder | Represents a NXOpen::Features::AdaptiveShell builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateAdaptiveShellBuilder Default values |
| AddendumSection | Represents an Addendum Section feature To create or edit an instance of this class, use NXOpen::Die::AddendumSectionBuilder Created in NX7.5.0 |
| AddendumSurface | Represents an Addendum Surface feature To create or edit an instance of this class, use NXOpen::Die::AddSurfBuilder Created in NX6.0.0 |
| AdmMoveFace | Represents a ADM Move Face feature To create or edit an instance of this class, use NXOpen::Features::AdmMoveFaceBuilder Created in NX6.0.0 |
| AdmMoveFaceBuilder | Represents a NXOpen::Features::AdmMoveFace builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateAdmMoveFaceBuilder Default values |
| AdmOffsetRegion | Represents a linear dimension feature To create or edit an instance of this class, use NXOpen::Features::AdmOffsetRegionBuilder Created in NX6.0.0 |
| AdmOffsetRegionBuilder | Represents a NXOpen::Features::AdmOffsetRegion builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateAdmOffsetRegionBuilder Default values |
| AdmResizeFace | Represents an ADM resize face feature To create or edit an instance of this class, use NXOpen::Features::AdmResizeFaceBuilder Created in NX6.0.0 |
| AdmResizeFaceBuilder | Represents a builder for a resize face feature |
| AeroCollection | This class contains the factory method for creating aero design feature builder |
| AeroFlange | Represents a flange feature To create or edit an instance of this class, use NXOpen::Features::AeroFlangeBuilder Created in NX10.0.0 |
| AeroFlangeBuilder | Represents a NXOpen::Features::AeroFlange builder To create a new instance of this class, use NXOpen::Features::AeroCollection::CreateAeroFlangeBuilder Default values |
| AeroRib | Represents a aero rib feature To create or edit an instance of this class, use NXOpen::Features::AeroRibBuilder Created in NX10.0.0 |
| AeroRibBuilder | Represents a NXOpen::Features::AeroRib builder To create a new instance of this class, use NXOpen::Features::AeroCollection::CreateAeroRibBuilder Default values |
| AestheticFaceBlend | Represents an aesthetic face blend feature To create or edit an instance of this class, use NXOpen::Features::AestheticFaceBlendBuilder Created in NX7.5.0 |
| AestheticFaceBlendBuilder | This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies |
| AnalyzePocket | Represents a analyze pocket feature |
| AnalyzePocketBuilder | Represents a NXOpen::Features::AnalyzePocket builder for Analyze Pocket feature |
| AngularDim | Represents a angular dimension feature To create or edit an instance of this class, use NXOpen::Features::AngularDimBuilder Created in NX6.0.0 |
| AngularDimBuilder | Represents a NXOpen::Features::AngularDim builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateAngularDimensionBuilder Created in NX6.0.0 |
| AOCS | Represents a Offset In Face feature (aka Associative Offset Curve on Surface ) To create or edit an instance of this class, use NXOpen::Features::AOCSBuilder Created in NX4.0.0 |
| AOCSBuilder | Represents a Offset In Face(aka Associative offset curve on face)feature builder |
| AssemblyCut | Represents an assembly cut feature |
| AssemblyCutBuilder | Represents a NXOpen::Features::AssemblyCut builder |
| AssociativeArc | Represents a associative arc feature To create or edit an instance of this class, use NXOpen::Features::AssociativeArcBuilder Created in NX5.0.0 |
| AssociativeArcBuilder | Represents a NXOpen::Features::AssociativeArc builder To create a new instance of this class, use NXOpen::Features::BaseFeatureCollection::CreateAssociativeArcBuilder Default values |
| AssociativeLine | Represents a associative line feature To create or edit an instance of this class, use NXOpen::Features::AssociativeLineBuilder Created in NX5.0.0 |
| AssociativeLineBuilder | Represents a NXOpen::Features::AssociativeLine builder To create a new instance of this class, use NXOpen::Features::BaseFeatureCollection::CreateAssociativeLineBuilder Default values |
| AutomotiveCollection | This class contains the factory method for creating automotive feature builder |
| iterator | Iterator for accessing the contents of the collection |
| BaseFeatureCollection | This class contains methods for creating builders for features that are owned by a NXOpen::BasePart that is not necessarily a NXOpen::Part |
| iterator | Iterator for accessing the contents of the collection |
| Bead | Represents a Bead feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::BeadBuilder Created in NX5.0.0 |
| Bend | Represents a Bend feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::BendBuilder Created in NX5.0.0 |
| BendTaper | Represents a bend taper feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::BendTaperBuilder Created in NX6.0.0 |
| BlendCorner | Represents a blend corner feature To create or edit an instance of this class, use NXOpen::Features::BlendCornerBuilder Created in NX9.0.0 |
| BlendCornerBuilder | Represents a NXOpen::Features::BlendCorner builder |
| BlendPocket | Represents a blend pocket feature |
| BlendPocketBuilder | Represents a NXOpen::Features::BlendPocket builder for Blend Pocket feature |
| Block | Represents a block feature |
| BlockFeatureBuilder | Represents a block feature builder |
| BodyByEquation | Represents a body by equation feature |
| BodyByEquationBuilder | Represents a NXOpen::Features::BodyByEquation builder |
| BodyFeature | Represents a feature on a part that has a body associated with it |
| BooleanBuilder | Represents a boolean feature builder |
| BooleanFeature | Represents a boolean feature |
| BoundedPlane | Represents a bounded plane feature To create or edit an instance of this class, use NXOpen::Features::BoundedPlaneBuilder Created in NX6.0.0 |
| BoundedPlaneBuilder | Represents a NXOpen::Features::BoundedPlane builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateBoundedPlaneBuilder Created in NX6.0.0 |
| BreakCorner | Represents a BreakCorner feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::BreakCornerBuilder Created in NX5.0.0 |
| Brep | Represents an unparameterized feature An unparameterized feature is obtained from an existing feature |
| BridgeCurve | Represents a bridge curve feature To create or edit an instance of this class, use NXOpen::Features::BridgeCurveBuilderEx Created in NX5.0.0 |
| BridgeCurveBuilder | Represents a NXOpen::Features::BridgeCurve builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateBridgeCurveBuilder Default values |
| BridgeCurveBuilderEx | Represents a NXOpen::Features::BridgeCurve builder |
| BridgeSurface | Represents a bridge surface feature To create or edit an instance of this class, use NXOpen::Features::BridgeSurfaceBuilder Created in NX8.0.0 |
| BridgeSurfaceBuilder | Represents a NXOpen::Features::BridgeSurface builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateBridgeSurfaceBuilder Default values |
| BridgeTransition | Represents a bridge transition feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::BridgeTransitionBuilder Created in NX5.0.2 |
| Chamfer | Represents a chamfer feature |
| ChamferBuilder | Represents the chamfer builder data |
| ChangeShellThickness | Represents a shell face feature To create or edit an instance of this class, use NXOpen::Features::ChangeShellThicknessBuilder Created in NX6.0.0 |
| ChangeShellThicknessBuilder | Represents a NXOpen::Features::ChangeShellThickness builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateChangeShellThicknessBuilder Default values |
| CircularBlendCurve | Represents a Circular Blend Curve feature To create or edit an instance of this class, use NXOpen::Features::CircularBlendCurveBuilder Created in NX5.0.0 |
| CircularBlendCurveBuilder | Represents a NXOpen::Features::CircularBlendCurve builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateCircularBlendCurveBuilder Default values |
| ClosedCorner | Represents a ClosedCorner feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::ClosedCornerBuilder Created in NX5.0.0 |
| Coaxial | Represents a coaxial feature To create or edit an instance of this class, use NXOpen::Features::CoaxialBuilder Created in NX6.0.0 |
| CoaxialBuilder | Represents a NXOpen::Features::Coaxial builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateCoaxialBuilder Default values |
| ColorFaceBuilder | Represents a NXOpen::Features::ColorFaceBuilder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateColorFaceBuilder Created in NX7.0.0 |
| ColorFeatureBuilder | Represents a NXOpen::Features::ColorFeatureBuilder Represents a color feature builder |
| ColorFeatureGroupBuilder | Represents a NXOpen::Features::ColorFeatureGroupBuilder Represents a color feature group builder |
| CombineBodyFeature | Represents a boolean feature |
| CombinedProjection | Represents a combined projection feature To create or edit an instance of this class, use NXOpen::Features::CombinedProjectionBuilder Created in NX6.0.0 |
| CombinedProjectionBuilder | Represents a NXOpen::Features::CombinedProjection builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateCombinedProjectionBuilder Default values |
| CombineSheets | Represents a combine sheets feature To create or edit an instance of this class, use NXOpen::Features::CombineSheetsBuilder Created in NX11.0.1 |
| CombineSheetsBuilder | Represents a combine sheets builder |
| CompensateRoughData | Represents a compensate rough curve or compensate rough sheet feature To create or edit an instance of this class, use NXOpen::Die::CompensateRoughDataBuilder Created in NX6.0.0 |
| CompositeCurve | Represents a composite curve feature To create or edit an instance of this class, use NXOpen::Features::CompositeCurveBuilder Created in NX5.0.0 |
| CompositeCurveBuilder | Represents a NXOpen::Features::CompositeCurve builder |
| ConcaveFaces | Represents a radius faces feature To create or edit an instance of this class, use NXOpen::Features::ConcaveFacesBuilder Created in NX7.5.0 |
| ConcaveFacesBuilder | Represents a Concave Faces builder |
| Cone | Represents a cone feature To create or edit an instance of this class, use NXOpen::Features::ConeBuilder Created in NX6.0.0 |
| ConeBuilder | Represents a builder for a cone feature |
| ConnectLattices | Represents a connect lattices feature To create or edit an instance of this class, use NXOpen::Features::ConnectLatticesBuilder Created in NX1847.0.0 |
| ConnectLatticesBuilder | Represents a Features::ConnectLattices builder To create a new instance of this class, use NXOpen::Features::LatticeFeatureCollection::CreateConnectLatticesBuilder Default values |
| ConstructionFeatureData | Represents the data of a construction feature |
| ContourFlange | Represents a Contour Flange feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::ContourFlangeBuilder Created in NX5.0.0 |
| ConvertToSheetmetal | Represents a ConvertToSheetmetal feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::ConvertToSheetmetalBuilder Created in NX5.0.0 |
| Coplanar | Represents a Coplanar feature To create or edit an instance of this class, use NXOpen::Features::CoplanarBuilder Created in NX6.0.0 |
| CoplanarBuilder | Represents a NXOpen::Features::Coplanar builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateCoplanarBuilder Default values |
| CopyFace | Represents a copy face feature To create or edit an instance of this class, use NXOpen::Features::CopyFaceBuilder Created in NX6.0.0 |
| CopyFaceBuilder | Represents a builder for a copy face feature |
| CopyPasteBuilder | Represents a NXOpen::Features::CopyPasteBuilder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateCopyPasteBuilder2 Created in NX6.0.0 |
| CurveFeature | Represents a curve feature This is an abstract class, and cannot be instantiated |
| CurveFeatureCollection | Manages curve features |
| CurveFinderBuilder | Represents a collection of curves and their relationships to other curves in the model Created in NX11.0.0 |
| CurveLength | Represents a curve length feature |
| CurveLengthBuilder | Represents the CurveLength builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateCurvelengthBuilder Default values |
| CurveOnSurface | Represents a curve on surface feature To create or edit an instance of this class, use NXOpen::Features::CurveOnSurfaceBuilder Created in NX5.0.0 |
| CurveOnSurfaceBuilder | Curve On Surface builder class |
| CustomAttributeCollection | This class contains the factory method for creating custom attribute object |
| iterator | Iterator for accessing the contents of the collection |
| CustomDoubleArrayAttribute | Represents a Features::CustomDoubleArrayAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomDoubleArrayAttribute Created in NX11.0.0 |
| CustomDoubleAttribute | Represents a Features::CustomDoubleAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomDoubleAttribute Created in NX11.0.0 |
| CustomExpressionArrayAttribute | Represents a Features::CustomExpressionArrayAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomExpressionArrayAttribute Created in NX11.0.0 |
| CustomExpressionAttribute | Represents a Features::CustomExpressionAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomExpressionAttribute Created in NX11.0.0 |
| CustomFeature | Represents a custom feature To create or edit an instance of this class, use NXOpen::Features::CustomFeatureBuilder Created in NX10.0.0 |
| CustomFeatureBuilder | Represents a Features::CustomFeature builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateCustomFeatureBuilder Created in NX11.0.0 |
| CustomFeatureClass | Provides interfaces to configure callbacks for a custom feature |
| CustomFeatureClassManager | Provides interfaces to utilise custom feature functionality To obtain an instance of this class, refer to NXOpen::Session Created in NX11.0.0 |
| CustomFeatureCreateFeatureGeometryEvent | Represents the event data for a create geometry callback for a custom feature |
| CustomFeatureData | Represents the collection of attributes for a custom feature |
| CustomFeatureDataCollection | This class contains the factory method for creating custom feature data object |
| iterator | Iterator for accessing the contents of the collection |
| CustomFeatureEvent | Represents the event data for custom feature |
| CustomFeatureHighlightEvent | Represents the event data for highlight callback for custom feature This class cannot be created Created in NX12.0.0 |
| CustomFeatureInformationEvent | Represents the event data for information callback for custom feature |
| CustomFeatureInternalFeaturePreUpdateEvent | Represents the event data for pre-update callback for construction and output feature of custom feature |
| CustomFeatureModifyFeatureGeometryEvent | Represents the event data for a modify geometry callback for a custom feature |
| CustomFeaturePostUpdateEvent | Represents the event data for post-update callback for custom feature |
| CustomFeaturePreUpdateEvent | Represents the event data for pre-update callback for custom feature |
| CustomFeatureSelectionFilter | Represents a Features::CustomFeatureSelectionFilter class An instance of this class can be obtained from NXOpen::Features::CustomFeatureClassManager::CreateCustomFeatureSelectionFilter Created in NX11.0.0 |
| CustomIntegerArrayAttribute | Represents a Features::CustomIntegerArrayAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomIntegerArrayAttribute Created in NX11.0.0 |
| CustomIntegerAttribute | Represents a Features::CustomIntegerAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomIntegerAttribute Created in NX11.0.0 |
| CustomLogicalArrayAttribute | Represents a Features::CustomLogicalArrayAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomLogicalArrayAttribute Created in NX11.0.0 |
| CustomLogicalAttribute | Represents a Features::CustomLogicalAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomLogicalAttribute Created in NX11.0.0 |
| CustomStringArrayAttribute | Represents a Features::CustomStringArrayAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomStringArrayAttribute Created in NX11.0.0 |
| CustomStringAttribute | Represents a Features::CustomStringAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomStringAttribute Created in NX11.0.0 |
| CustomTagArrayAttribute | Represents a Features::CustomTagArrayAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomTagArrayAttribute Created in NX11.0.0 |
| CustomTagAttribute | Represents a Features::CustomAttribute class An instance of this class can be obtained from NXOpen::Features::CustomAttributeCollection::CreateCustomTagAttribute Created in NX11.0.0 |
| CutFace | Represents a cut face feature To create or edit an instance of this class, use NXOpen::Features::CutFaceBuilder Created in NX6.0.0 |
| CutFaceBuilder | Represents a builder for a cut face feature |
| Cylinder | Represents a cylinder feature To create or edit an instance of this class, use NXOpen::Features::CylinderBuilder Created in NX5.0.0 |
| CylinderBuilder | Represents a NXOpen::Features::Cylinder builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateCylinderBuilder Default values |
| DatumAxisBuilder | Represents a datum axis feature builder |
| DatumAxisFeature | Represents a datum axis feature To create or edit an instance of this class, use NXOpen::Features::DatumAxisBuilder Created in NX3.0.0 |
| DatumBuilder | Represents a builder for datum features |
| DatumCsys | Represents a Datum Coordinate System feature |
| DatumCsysBuilder | Represents a datum csys builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateDatumCsysBuilder Created in NX4.0.0 |
| DatumFeature | Represents a Datum feature that is positioned by a set of constraints |
| DatumPlaneBuilder | Represents a datum plane feature builder |
| DatumPlaneFeature | Represents a datum plane feature To create or edit an instance of this class, use NXOpen::Features::DatumPlaneBuilder Created in NX3.0.0 |
| DeformDefinitionBuilder | Used as a place holder for selected member features, expressions and external references for a deform definition feature record that is to be created |
| JaDeformDefinitionExpData | |
| DeleteBody | Represents a delete body feature |
| DeleteBodyBuilder | Represents a NXOpen::Features::DeleteBody builder for Delete Body feature |
| DeleteCurve | Represents a delete curve feature To create or edit an instance of this class, use NXOpen::Features::DeleteCurveBuilder Created in NX9.0.0 |
| DeleteCurveBuilder | Represents a NXOpen::Features::DeleteCurve builder To create a new instance of this class, use NXOpen::Features::SynchronousCurveCollection::CreateDeleteCurveBuilder Default values |
| DeleteEdge | Represents a delete edge feature To create or edit an instance of this class, use NXOpen::Features::DeleteEdgeBuilder Created in NX8.0.0 |
| DeleteEdgeBuilder | Represents a builder for a delete edge feature |
| DeleteFace | Represents a delete face feature , don't use it until nx502 To create or edit an instance of this class, use NXOpen::Features::DeleteFaceBuilder Created in NX5.0.2 |
| DeleteFaceBuilder | Represents a builder for a delete face feature, don't use it until nx502 |
| DeleteTextureObjectsData | Delete texture objects data |
| DesignFeatureCollection | Manages design features |
| DimensionBuilder | Represents a NXOpen::Features::DimensionBuilder The sub-class should create an instance of corresponding object Default values |
| Dimple | Represents a Dimple feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::DimpleBuilder Created in NX5.0.0 |
| DivideCurveBuilder | Represents a builder for non-associative divide curve operation |
| Divideface | Represents a Divideface feature |
| DividefaceBuilder | Represents a divide face builder |
| Draft | Represents a Draft feature |
| DraftBody | Represents a draft body feature To create or edit an instance of this class, use NXOpen::Features::DraftBodyBuilder Created in NX5.0.0 |
| DraftBodyBuilder | Represents a NXOpen::Features::DraftBody builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateDraftBodyBuilder Default values |
| DraftBuilder | Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature |
| DraftingSplineBuilder | Sketch Spline builder class |
| DrawDiePunch | Represents a draw die punch feature |
| DrawnCutout | Represents a DrawnCutout feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::DrawnCutoutBuilder Created in NX5.0.0 |
| EdgeBlend | Represents an Edge Blend feature To create or edit an instance of this class, use NXOpen::Features::EdgeBlendBuilder Created in NX5.0.0 |
| EdgeBlendBuilder | Represents a Edge Blend builder |
| EdgeRip | Represents an EdgeRip feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::EdgeRipBuilder Created in NX5.0.0 |
| EdgeSymmetry | Represents an edge symmetry feature To create or edit an instance of this class, use NXOpen::Features::EdgeSymmetryBuilder Created in NX7.0.0 |
| EdgeSymmetryBuilder | Represents a NXOpen::Features::EdgeSymmetry builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateEdgeSymmetryBuilder Default values |
| EditBend | Represents a edit bend feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::EditBendBuilder Created in NX7.5.0 |
| EditCrossSection | Represents a edit cross section feature |
| EditCrossSectionBuilder | Represents a NXOpen::Features::EditCrossSection builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateEditCrossSectionBuilder Default values |
| EditDimensionBuilder | Represents a builder of edit feature dimensions To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateEditDimensionBuilder Default values |
| EditWithRollbackManager | Represents an object that stores transient data during Edit with Rollback of a feature |
| EmbeddedOperationBuilder | Represents an EmbeddedOperationBuilder This is an abstract class, and cannot be instantiated |
| EmbedManagerBuilder | Used to manage the interaction to Embed, Replace, Rename and Delete embedded file information in the part file |
| Emboss | Represents an emboss feature To create or edit an instance of this class, use NXOpen::Features::EmbossBuilder Created in NX4.0.0 |
| EmbossBody | Represents an emboss body feature To create or edit an instance of this class, use NXOpen::Features::EmbossBodyBuilder Created in NX8.5.0 |
| EmbossBodyBuilder | Represents a NXOpen::Features::EmbossBody builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateEmbossBodyBuilder Default values |
| EmbossBuilder | Represents an emboss feature builder that creates or edits an emboss feature |
| EmbossJoggle | Represents a joggle object |
| EmbossLimit | Represents emboss start and end objects, meaning, targets and end-cap definitions |
| EmbossProjection | Represents a projection object |
| EmbossRegion | Represents an emboss region object |
| EmbossSidewall | Represents an emboss sidewall object |
| EmbossTaper | Represents a taper object |
| EmbossTarget | Represents a target object |
| Enlarge | Represents an enlarge feature To create or edit an instance of this class, use NXOpen::Features::EnlargeBuilder Created in NX6.0.0 |
| EnlargeBuilder | Represents a NXOpen::Features::Enlarge builder |
| ExtendSheet | Represents an extend sheet feature To create or edit an instance of this class, use NXOpen::Features::ExtendSheetBuilder Created in NX9.0.0 |
| ExtendSheetBuilder | Represents a NXOpen::Features::ExtendSheet builder To create a new instance of this class, use NXOpen::Features::TrimFeatureCollection::CreateExtendSheetBuilder Default values |
| Extension | Represents a extension feature To create or edit an instance of this class, use NXOpen::Features::ExtensionBuilder Created in NX8.0.0 |
| ExtensionBuilder | Represents a NXOpen::Features::Extension builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateExtensionBuilder Default values |
| ExtractFace | Represents a Extract face feature To create or edit an instance of this class, use NXOpen::Features::ExtractFaceBuilder Created in NX5.0.0 |
| ExtractFaceBuilder | Represents a NXOpen::Features::ExtractFace builder |
| ExtractGraphBuilder | Represents a Features.ExtractGraphBuilder To create a new instance of this class, use NXOpen::Features::LatticeFeatureCollection::CreateExtractGraphBuilder Created in NX1847.0.0 |
| Extrude | Represents an extrude feature |
| ExtrudeBuilder | Represents a extrude feature builder |
| FaceBlend | Represents a Face Blend feature |
| FaceBlendBuilder | Represents a face blend builder |
| FaceRecognitionBuilder | Represents a collection of faces and their relationships to other faces in the model Created in NX6.0.0 |
| FaceSheet | Represents a Face Sheet feature To create or edit an instance of this class, use NXOpen::Die::FaceSheetBuilder Created in NX5.0.0 |
| Feature | Represents a feature on a part This is an abstract class, and cannot be instantiated |
| FeatureBuilder | Represents a Feature Builder to be used in the creation and modification of features |
| FeatureCollection | Represents a collection of features To obtain an instance of this class, refer to NXOpen::BasePart Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FeatureGroup | Represents a NXOpen::Features::FeatureGroup Not support KF |
| FeatureList | Represents a list of objects |
| FeatureReferencesBuilder | Represents a NXOpen::Features::FeatureReferencesBuilder |
| FeatureReplayBuilder | Represents a NXOpen::Features::FeatureReplayBuilder builder |
| FillHole | Represents a fill hole feature |
| FillHoleBuilder | Represents a NXOpen::Features::FillHole builder To create a new instance of this class, use NXOpen::Features::FreeformSurfaceCollection::CreateFillHoleBuilder Default values |
| BorderContinuity | Represents continuity value at a border curve |
| FilterLatticeBuilder | Removes rods of existing lattice bodies based on the specified filter cases |
| FitCurve | Represents a fit curve feature To create or edit an instance of this class, use NXOpen::Features::FitCurveBuilder Created in NX8.5.0 |
| FitCurveBuilder | Represents a NXOpen::Features::FitCurve builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateFitCurveBuilder Default values |
| FitSurface | Represents a fit surface feature To create or edit an instance of this class, use NXOpen::Features::FitSurfaceBuilder Created in NX8.5.0 |
| FitSurfaceBuilder | This class will provide the ability to fit surfaces through facet bodies or point sets/groups |
| Fixed | Represents a Fixed feature To create or edit an instance of this class, use NXOpen::Features::FixedBuilder Created in NX7.0.0 |
| FixedBuilder | Represents a builder for a fixed feature |
| Flange | Represents a Flange feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::FlangeBuilder Created in NX5.0.0 |
| FlatPattern | Represents a Flat Solid feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::FlatPatternBuilder Created in NX5.0.1 |
| ObjectDataCsys | Structure used to return data about objects in the flat pattern |
| ObjectDataEdge | Structure used to return data about objects in the flat pattern |
| ObjectDataFace | Structure used to return data about objects in the flat pattern |
| ObjectDataGeneral | Structure used to return data about objects in the flat pattern |
| FlatSolid | Represents a Flat Solid feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::FlatSolidBuilder Created in NX5.0.0 |
| ObjectDataCsys | Structure used to return the objects of a flat solid |
| FlatteningAndForming | Represents a flattening and forming feature To create or edit an instance of this class, use NXOpen::Features::FlatteningAndFormingBuilderEx Created in NX11.0.0 |
| FlatteningAndFormingBuilder | This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane |
| FlatteningAndFormingBuilderEx | This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane |
| FlexibleCable | Represents a flexible cable To create or edit an instance of this class, use NXOpen::Features::SheetMetal::FlexibleCableBuilder Created in NX7.5.0 |
| FlowBlend | Represents a flow blend feature To create or edit an instance of this class, use NXOpen::Features::FlowBlendBuilder Created in NX10.0.0 |
| FlowBlendBuilder | Represents a NXOpen::Features::FlowBlend builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateFlowBlendBuilder Default values |
| FreeformCurveCollection | Collection of freeform curve based features |
| FreeformSurfaceCollection | Collection of freeform surface based features |
| FreeformUnform | Represents a FreeformUnform feature To create or edit an instance of this class, use NXOpen::Tooling::FreeformUnformBuilder Created in NX1847.0.0 |
| FreeTransformer | Represents a free transformer feature To create or edit an instance of this class, use NXOpen::Features::FreeTransformerBuilder Created in NX10.0.0 |
| FreeTransformerBuilder | Represents a NXOpen::Features::FreeTransformer builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateFreeTransformerBuilder Default values |
| GeneralConic | Represents a general conic feature To create or edit an instance of this class, use NXOpen::Features::GeneralConicBuilder Created in NX8.5.0 |
| GeneralConicBuilder | Represents a NXOpen::Features::GeneralConic builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateGeneralConicBuilder Default values |
| GeodesicChamfer | Represents a GeodesicChamfer feature |
| GeodesicChamferBuilder | Represents a NXOpen::Features::GeodesicChamfer builder for GeodesicChamfer command |
| GeodesicFillet | Represents a GeodesicFillet feature |
| GeodesicFilletBuilder | Represents a NXOpen::Features::GeodesicFillet builder for GeodesicFillet command |
| GeodesicIntersect | Represents a GeodesicIntersect feature |
| GeodesicIntersectBuilder | Represents a NXOpen::Features::GeodesicIntersect builder for Intersect command |
| GeodesicLine | Represents a GeodesicLine feature |
| GeodesicLineBuilder | Represents a NXOpen::Features::GeodesicLine builder for GeodesicLine command |
| GeodesicOffset | Represents a GeodesicOffset feature |
| GeodesicOffsetBuilder | Represents a NXOpen::Features::GeodesicOffset builder for Offset command |
| GeodesicPoint | Represents a GeodesicPoint feature |
| GeodesicPointBuilder | Represents a NXOpen::Features::GeodesicPoint builder for GeodesicPoint command |
| GeodesicProject | Represents a GeodesicProject feature |
| GeodesicProjectBuilder | Represents a NXOpen::Features::GeodesicProject builder for Project command |
| GeodesicResetBuilder | Represents a NXOpen::Features::GeodesicResetBuilder To create a new instance of this class, use NXOpen::Features::GeodesicSketchCollection::CreateGeodesicResetBuilder Created in NX10.0.0 |
| GeodesicSketch | Represents a GeodesicSketch feature |
| GeodesicSketchBuilder | Represents a Features::GeodesicSketch builder for GeodesicSketch feature |
| GeodesicSketchCollection | Represents a collection of GeodesicSketch features To obtain an instance of this class, refer to NXOpen::Features::FeatureCollection Created in NX10.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| GeodesicTrim | Represents a GeodesicTrim feature |
| GeodesicTrimBuilder | Represents a NXOpen::Features::GeodesicSketch builder for GeodesicTrim command |
| Geomcopy | Represents a geomcopy feature To create or edit an instance of this class, use NXOpen::Features::GeomcopyBuilder Created in NX5.0.0 |
| GeomcopyBuilder | Represents a NXOpen::Features::Geomcopy builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateGeomcopyBuilder Default values |
| GeometricConstraintData | Represents Geometric Constraint Data class |
| GeometricConstraintDataManager | Represents Geometric Constraint Data Manager class |
| GeometricConstraintDataSetManager | Represents Geometric Constraint Data Set Manager class |
| GlobalShaping | Represents a global shaping feature To create or edit an instance of this class, use NXOpen::Features::GlobalShapingBuilder Created in NX5.0.0 |
| GlobalShapingBuilder | Represents a NXOpen::Features::GlobalShaping builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateGlobalShapingBuilder Default values |
| GlobalShapingCurveOffsetBuilder | The class used to define the curves and offset laws needed for the target curve list |
| GlobalShapingCurveOffsetBuilderList | Represents a list of objects |
| GlobalShapingPointOffsetBuilder | The class used to define the points and offsets needed for the target point list |
| GlobalShapingPointOffsetBuilderList | Represents a list of objects |
| GroupFace | Represents a group face feature To create or edit an instance of this class, use NXOpen::Features::GroupFaceBuilder Created in NX6.0.0 |
| GroupFaceBuilder | Represents a builder for a group face feature |
| GuidedExtensionBuilderEx | Represents a NXOpen::Features::GuidedExtensionEx builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateGuidedExtensionBuilderEx Default values |
| GuidedExtensionEx | Represents a guided extension feature To create or edit an instance of this class, use NXOpen::Features::GuidedExtensionBuilderEx Created in NX10.0.0 |
| Gusset | Represents a gusset feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::GussetBuilder Created in NX7.5.0 |
| Helix | Represents a helix feature To create or edit an instance of this class, use NXOpen::Features::HelixBuilder Created in NX8.5.0 |
| HelixBuilder | Represents a NXOpen::Features::Helix builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateHelixBuilder Default values |
| HemFlange | Represents a hem flange feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::HemFlangeBuilder Created in NX5.0.0 |
| Hole | Represents a Hole feature To create or edit an instance of this class, use NXOpen::Features::HoleFeatureBuilder Created in NX3.0.0 |
| HoleFeatureBuilder | Represents a Hole feature builder |
| HolePackage | Represents a hole package and hole series feature |
| HolePackageBuilder | Represents a NXOpen::Features::HolePackage builder |
| Human | Represents a human feature |
| HumanBuilder | Represents a human feature |
| IBoolean | Base class for Unite, Intersect and Subtract features |
| IContainerFeature | Represents a container feature on a part |
| IForm | Represents a IForm feature To create or edit an instance of this class, use NXOpen::Features::IFormBuilder Created in NX7.5.0 |
| IFormBuilder | Represents a NXOpen::Features::IForm builder |
| IIsolateToolBodyOperation | Represents a combine body feature |
| InstanceFeature | Represents a instance feature To create or edit an instance of this class, use NXOpen::Features::InstanceFeatureBuilder Created in NX8.0.0 |
| InstanceFeatureBuilder | Instance feature builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateInstanceFeatureBuilder Default values |
| Intersect | Represents a Intersect feature Note that this class is now deprecated |
| IntersectionCurve | Represents a NXOpen::Features::IntersectionCurve |
| IntersectionCurveBuilder | Represents a NXOpen::Features::IntersectionCurveBuilder builder |
| IsoclineCurve | Represents a isocline curve feature To create or edit an instance of this class, use NXOpen::Features::IsoclineCurveBuilder Created in NX11.0.0 |
| IsoclineCurveBuilder | Represents a Features::IsoclineCurve builder To create a new instance of this class, use NXOpen::Features::FreeformCurveCollection::CreateIsoclineCurveBuilder Default values |
| IsolateFeature | Represents a Isolate Object of feature To create or edit an instance of this class, use NXOpen::Features::IsolateFeatureBuilder Created in NX8.5.0 |
| IsolateFeatureBuilder | Represents a NXOpen::Features::IsolateFeature builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateIsolateFeatureBuilder Created in NX8.5.0 |
| IsoparametricCurves | Represents a isoparametric curves feature To create or edit an instance of this class, use NXOpen::Features::IsoparametricCurvesBuilder Created in NX8.0.0 |
| IsoparametricCurvesBuilder | Represents a NXOpen::Features::IsoparametricCurves builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateIsoparametricCurvesBuilder Default values |
| Jog | Represents a Jog feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::JogBuilder Created in NX5.0.0 |
| JoinCurves | Represents a join curve feature To create or edit an instance of this class, use NXOpen::Features::JoinCurvesBuilder Created in NX5.0.0 |
| JoinCurvesBuilder | Represents a NXOpen::Features::JoinCurves builder |
| LabelChamfer | Represents a label chamfer feature To create or edit an instance of this class, use NXOpen::Features::LabelChamferBuilder Created in NX7.0.0 |
| LabelChamferBuilder | Represents a NXOpen::Features::LabelChamfer builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateLabelChamferBuilder Created in NX7.0.0 |
| LabelNotchBlend | Represents a label notch blend feature To create or edit an instance of this class, use NXOpen::Features::LabelNotchBlendBuilder Created in NX8.0.0 |
| LabelNotchBlendBuilder | Represents a NXOpen::Features::LabelNotchBlend builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateLabelNotchBlendBuilder Created in NX8.0.0 |
| Lattice | Represents a lattice utility To create or edit an instance of this class, use NXOpen::Features::LatticeBuilder Created in NX11.0.2 |
| LatticeBuilder | Represents a Features.Lattice builder To create a new instance of this class, use NXOpen::Features::LatticeFeatureCollection::CreateLatticeBuilder Default values |
| LatticeFeatureCollection | Manages lattice features |
| LawCurve | Represents a law curve feature To create or edit an instance of this class, use NXOpen::Features::LawCurveBuilder Created in NX7.5.1 |
| LawCurveBuilder | Represents a NXOpen::Features::LawCurve builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateLawCurveBuilder Default values |
| LawExtension | Represents a law extension feature To create or edit an instance of this class, use NXOpen::Features::LawExtensionBuilder Created in NX6.0.0 |
| LawExtensionBuilder | Represents a NXOpen::Features::LawExtension builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateLawExtensionBuilder Default values |
| LawExtensionBuilderEx | Represents a NXOpen::Features::LawExtensionEx builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateLawExtensionBuilderEx Default values |
| LawExtensionEx | Represents a law extension feature To create or edit an instance of this class, use NXOpen::Features::LawExtensionBuilderEx Created in NX8.5.0 |
| LinearDimension | Represents a linear dimension feature To create or edit an instance of this class, use NXOpen::Features::LinearDimensionBuilder Created in NX6.0.0 |
| LinearDimensionBuilder | Represents a NXOpen::Features::LinearDimension builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateLinearDimensionBuilder Default values |
| LinkedFacet | Represents a linked facet feature To create or edit an instance of this class, use NXOpen::Features::LinkedFacetBuilder Created in NX6.0.0 |
| LinkedFacetBuilder | Represents a NXOpen::Features::LinkedFacet builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateLinkedFacetBuilder Created in NX6.0.0 |
| LocalScaleCurve | Represents a local scale curve feature To create or edit an instance of this class, use NXOpen::Features::LocalScaleCurveBuilder Created in NX11.0.0 |
| LocalScaleCurveBuilder | Represents a Features::LocalScaleCurve builder To create a new instance of this class, use NXOpen::Features::SynchronousCurveCollection::CreateLocalScaleCurveBuilder Default values |
| LoftedFlange | Represents a Lofted Flange feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::LoftedFlangeBuilder Created in NX5.0.0 |
| Louver | Represents a Louver feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::LouverBuilder Created in NX5.0.0 |
| MakeOffset | Represents a make offset feature To create or edit an instance of this class, use NXOpen::Features::MakeOffsetBuilder Created in NX7.5.0 |
| MakeOffsetBuilder | Represents a NXOpen::Features::MakeOffset builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMakeOffsetBuilder Default values |
| MakeSolid | Represents a make solid feature that converts closed sheet bodies to solid bodies |
| MakeSolidBuilder | Represents a Features::MakeSolid builder |
| Maple | Represents a maple feature To create or edit an instance of this class, use NXOpen::Features::MapleBuilder |
| MapleBuilder | Represents a NXOpen::Features::Maple builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMapleBuilder Default values |
| MasterCut | Represents a section view feature To create or edit an instance of this class, use NXOpen::Features::MasterCutBuilder Created in NX5.0.0 |
| MasterCutBuilder | Represents a master cut feature builder that creates, inquires, or edits a master cut feature associated with a Cut View |
| MatchEdge | Represents a match edge feature To create or edit an instance of this class, use NXOpen::Features::MatchEdgeBuilder Created in NX6.0.0 |
| MatchEdgeBuilder | Represents a NXOpen::Features::MatchEdge builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMatchEdgeBuilder Default values |
| MatchedReferenceBuilder | Represents a NXOpen::Features::MatchedReferenceBuilder |
| MathIntegration | Represents a math integration feature To create or edit an instance of this class, use NXOpen::Features::MathIntegrationBuilder Created in NX12.0.0 |
| MathIntegrationBuilder | Represents a NXOpen::Features::MathIntegration builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMathIntegrationBuilder Default values |
| MeshSurface | Represents a mesh surface feature |
| MeshSurfaceBuilder | Mesh Surface Builder class |
| MeshTransformer | Represents a mesh transformer feature To create or edit an instance of this class, use NXOpen::Features::MeshTransformerBuilder Created in NX10.0.0 |
| MeshTransformerBuilder | Represents a NXOpen::Features::MeshTransformer builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMeshTransformerBuilder Default values |
| Metaform | Represents a metaform feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::MetaformBuilder Created in NX7.5.0 |
| MidSurfaceByFacePairs | Represents a mid surface by face pairs feature To create or edit an instance of this class, use NXOpen::Features::MidSurfaceByFacePairsBuilder Created in NX7.5.0 |
| MidSurfaceByFacePairsBuilder | Represents a NXOpen::Features::MidSurfaceByFacePairs builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMidSurfaceByFacePairsBuilder Default values |
| MidSurfaceFacePair | Represents a mid surface by face pairs feature This is an abstract class Created in NX8.0.1 |
| MidSurfaceUserDefined | Represents a midsurface user defined feature To create or edit an instance of this class, use NXOpen::Features::MidSurfaceUserDefinedBuilder Created in NX7.5.0 |
| MidSurfaceUserDefinedBuilder | Represents a NXOpen::Features::MidSurfaceUserDefined builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMidSurfaceUserDefinedBuilder Default values |
| Mirror | Represents a mirror feature |
| MirrorBody | Represents a mirror body feature |
| MirrorBodyBuilder | Represents a NXOpen::Features::MirrorBody builder |
| MirrorBuilder | Represents a NXOpen::Features::Mirror builder |
| MirrorCurve | Represents a mirror curve feature To create or edit an instance of this class, use NXOpen::Features::MirrorCurveBuilder Created in NX6.0.0 |
| MirrorCurveBuilder | Represents a NXOpen::Features::MirrorCurve builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMirrorCurveBuilder Default values |
| MirrorFace | Represents a Mirror Face feature To create or edit an instance of this class, use NXOpen::Features::MirrorFaceBuilder Created in NX6.0.0 |
| MirrorFaceBuilder | Represents a NXOpen::Features::MirrorFace builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMirrorFaceBuilder Default values |
| MirrorFeature | Represents a mirror feature feature |
| MirrorFeatureBuilder | Represents a NXOpen::Features::MirrorFeature builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateMirrorFeatureBuilder Created in NX5.0.0 |
| MoveCurve | Represents a move curve feature To create or edit an instance of this class, use NXOpen::Features::MoveCurveBuilder Created in NX9.0.0 |
| MoveCurveBuilder | Represents a NXOpen::Features::MoveCurve builder To create a new instance of this class, use NXOpen::Features::SynchronousCurveCollection::CreateMoveCurveBuilder Default values |
| MoveEdge | Represents a move edge feature To create or edit an instance of this class, use NXOpen::Features::MoveEdgeBuilder Created in NX9.0.0 |
| MoveEdgeBuilder | Represents a NXOpen::Features::MoveEdge builder To create a new instance of this class, use NXOpen::Features::SynchronousEdgeCollection::CreateMoveEdgeBuilder Default values |
| MoveFace | Represents a move face feature , don't use it until nx502 To create or edit an instance of this class, use NXOpen::Features::MoveFaceBuilder Created in NX5.0.2 |
| MoveFaceBuilder | Represents a builder for a move face feature, don't use it until nx502 |
| MoveObject | Represents a Move-Object feature |
| MoveObjectBuilder | Represents a NXOpen::Features::MoveObjectBuilder |
| NormalCutout | Represents a Normal Cutout feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::NormalCutoutBuilder Created in NX5.0.0 |
| NSidedSurface | Represents a nsided surface feature To create or edit an instance of this class, use NXOpen::Features::NSidedSurfaceBuilder Created in NX6.0.0 |
| NSidedSurfaceBuilder | Represents a NXOpen::Features::NSidedSurface builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateNSidedSurfaceBuilder Default values |
| Offset3DCurve | Represents a offset 3D curve feature To create or edit an instance of this class, use NXOpen::Features::Offset3DCurveBuilder Created in NX10.0.0 |
| Offset3DCurveBuilder | Represents a Features::Offset3DCurveBuilder builder which implements offset curves along a direction with offset distance in three dimension |
| OffsetCurve | Represents a offset curve feature To create or edit an instance of this class, use NXOpen::Features::OffsetCurveBuilder Created in NX5.0.0 |
| OffsetCurveBuilder | Represents a NXOpen::Features::OffsetCurve builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateOffsetCurveBuilder Default values |
| OffsetEdge | Represents a offset edge feature To create or edit an instance of this class, use NXOpen::Features::OffsetEdgeBuilder Created in NX9.0.0 |
| OffsetEdgeBuilder | Represents a NXOpen::Features::OffsetEdge builder To create a new instance of this class, use NXOpen::Features::SynchronousEdgeCollection::CreateOffsetEdgeBuilder Created in NX9.0.0 |
| OffsetEmboss | Represents an offset emboss feature To create or edit an instance of this class, use NXOpen::Features::OffsetEmbossBuilder Created in NX5.0.0 |
| OffsetEmbossBuilder | Represents a builder for an offset emboss feature |
| OffsetFace | Represents a offset face feature To create or edit an instance of this class, use NXOpen::Features::OffsetFaceBuilder Created in NX5.0.0 |
| OffsetFaceBuilder | Represents a NXOpen::Features::OffsetFace builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateOffsetFaceBuilder Default values |
| OffsetFacetBody | Represents a offset facet body feature To create or edit an instance of this class, use NXOpen::Features::OffsetFacetBodyBuilder Created in NX12.0.0 |
| OffsetFacetBodyBuilder | Represents a NXOpen::Features::OffsetFacetBody |
| OffsetMoveCurve | Represents a offset move curve feature To create or edit an instance of this class, use NXOpen::Features::OffsetMoveCurveBuilder Created in NX9.0.0 |
| OffsetMoveCurveBuilder | Represents a NXOpen::Features::OffsetMoveCurve builder To create a new instance of this class, use NXOpen::Features::SynchronousCurveCollection::CreateOffsetMoveCurveBuilder Default values |
| OffsetRegion | Represents an offset region feature , don't use it until nx502 To create or edit an instance of this class, use NXOpen::Features::OffsetRegionBuilder Created in NX5.0.2 |
| OffsetRegionBuilder | Represents a builder for an offset region feature, don't use it until nx502 |
| OffsetSurface | Represents a offset surface feature |
| OffsetSurfaceBuilder | This class represents a offset surface builder, used for creating or editing an offset surface feature |
| OptimizeCurveBuilder | Represents a builder of optimize curve To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateOptimizeCurveBuilder Default values |
| OptimizeFace | Represents a optimize face feature To create or edit an instance of this class, use NXOpen::Features::OptimizeFaceBuilder Created in NX7.0.0 |
| OptimizeFaceBuilder | Represents a builder of optimize face To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateOptimizeFaceBuilder Default values |
| OutputFeatureData | Represents the data of a output feature |
| OvercrownBuilder | Represents a Overcrown Builder To create an instance of this this class use Features::FeatureCollection::CreateOvercrownFeatureBuilder Created in NX4.0.0 |
| PaintParametersBuilder | Represents a paint feature parameters builder |
| Parallel | Represents a parallel feature To create or edit an instance of this class, use NXOpen::Features::ParallelBuilder Created in NX6.0.0 |
| ParallelBuilder | Represents a NXOpen::Features::Parallel builder |
| PartGeometryCopyBuilder | Represents a NXOpen::Features::PartGeometryCopyBuilder builder Created in NX9.0.0 |
| PartGeometryCopySelectBuilder | Represents a NXOpen::Features::PartGeometryCopySelectBuilder builder Created in NX9.0.0 |
| PartGeometryCopySelectBuilderList | Represents a list of objects |
| PartModule | Represents a part module To create or edit an instance of this class, use NXOpen::Features::PartModuleBuilder Created in NX8.0.0 |
| PartModuleBuilder | Represents a NXOpen::Features::PartModule builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreatePartModuleBuilder Created in NX8.0.0 |
| PasteFace | Represents a paste face feature To create or edit an instance of this class, use NXOpen::Features::PasteFaceBuilder Created in NX6.0.0 |
| PasteFaceBuilder | Represents a builder for a paste face feature |
| Patch | Represents a Patch feature To create or edit an instance of this class, use NXOpen::Features::PatchBuilder Created in NX6.0.1 |
| PatchBuilder | Represents a NXOpen::Features::PatchBuilder Lets you use a sheet body to replace some of the faces of a solid body |
| PatchOpenings | Represents a Patch Openings feature To create or edit an instance of this class, use NXOpen::Features::PatchOpeningsBuilder Created in NX5.0.0 |
| PatchOpeningsBuilder | Represents a builder for a Patch Openings feature |
| PatternFace | Represents a pattern face feature , don't use it until nx502 To create or edit an instance of this class, use NXOpen::Features::PatternFaceBuilder Created in NX5.0.2 |
| PatternFaceBuilder | Represents a builder for a pattern face feature, don't use it until nx502 |
| PatternFaceFeature | Represents a pattern face feature To create or edit an instance of this class, use NXOpen::Features::PatternFaceFeatureBuilder Created in NX9.0.0 |
| PatternFaceFeatureBuilder | Represents a builder for a pattern face feature, post NX9 |
| PatternFeature | Represents a pattern feature To create or edit an instance of this class, use NXOpen::Features::PatternFeatureBuilder Created in NX7.0.0 |
| PatternFeatureBuilder | Represents a NXOpen::Features::PatternFeature builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreatePatternFeatureBuilder Default values |
| PatternGeometry | Represents a pattern geometry feature |
| PatternGeometryBuilder | This class represents the builder to be used to create Pattern Geometry features |
| Perpendicular | Represents a perpendicular feature To create or edit an instance of this class, use NXOpen::Features::PerpendicularBuilder Created in NX6.0.0 |
| PerpendicularBuilder | Represents a NXOpen::Features::Perpendicular builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreatePerpendicularBuilder Default values |
| PierceTask | Represents a Pierce Task feature To create or edit an instance of this class, use NXOpen::Die::PierceTaskBuilder Created in NX5.0.0 |
| PointFeature | Represents a point feature To create or edit an instance of this class, use NXOpen::Features::PointFeatureBuilder Created in NX5.0.0 |
| PointFeatureBuilder | Represents a NXOpen::Features::PointFeatureBuilder builder To create a new instance of this class, use NXOpen::Features::BaseFeatureCollection::CreatePointFeatureBuilder Created in NX5.0.0 |
| PointSet | Represents a point set feature To create or edit an instance of this class, use NXOpen::Features::PointSetBuilder Created in NX6.0.0 |
| PointSetBuilder | Represents a NXOpen::Features::PointSetBuilder |
| PointSetFacePercentageBuilder | Represents a NXOpen::Features::PointSetFacePercentageBuilder |
| PointSetFacePercentageBuilderList | Represents a list of objects |
| PoleSmoothing | Represents a pole smoothing feature To create or edit an instance of this class, use NXOpen::Features::PoleSmoothingBuilder Created in NX6.0.0 |
| PoleSmoothingBuilder | Represents a NXOpen::Features::PoleSmoothing builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreatePoleSmoothingBuilder Default values |
| PolylineBuilder | Polyline builder class |
| Prebend | Represents a Prebend feature To create or edit an instance of this class, use NXOpen::Tooling::PrebendBuilder Created in NX10.0.0 |
| PrintCsysBuilder | Represents a Features::Feature builder To create a new instance of this class, use NXOpen::Features::PrintCsysFeatureCollection::CreatePrintCsysBuilder Default values |
| PrintCsysFeatureCollection | Manages print csys features |
| ProjectCurve | Represents a project curve feature |
| ProjectCurveBuilder | Represents a NXOpen::Features::ProjectCurve builder |
| Promotion | Represents a promotion feature |
| PromotionBuilder | Represents a NXOpen::Features::Promotion builder |
| PullFace | Represents a pull face feature To create or edit an instance of this class, use NXOpen::Features::PullFaceBuilder Created in NX6.0.0 |
| PullFaceBuilder | Represents a NXOpen::Features::PullFace builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreatePullFaceBuilder Default values |
| QuickBinder | Represents a quick binder feature To create or edit an instance of this class, use NXOpen::Die::QuickBinderBuilder Created in NX7.5.0 |
| RadialDimension | Represents a radial dimension feature To create or edit an instance of this class, use NXOpen::Features::RadialDimensionBuilder Created in NX6.0.0 |
| RadialDimensionBuilder | Represents a NXOpen::Features::RadialDimension builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateRadialDimensionBuilder Created in NX6.0.0 |
| RapidSurface | Represents a Rapid Surfacing feature To create or edit an instance of this class, use NXOpen::Features::RapidSurfaceBuilder Created in NX5.0.0 |
| RapidSurfaceBuilder | Represents a NXOpen::Features::RapidSurface builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateRapidSurfaceBuilder Default values |
| RasterImage | Represents a Raster Image feature Not supported by KF at this time Created in NX4.0.0 |
| Rebend | Represents a Rebend feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::RebendBuilder Created in NX5.0.0 |
| ReferenceMapperBuilder | Represents a NXOpen::Features::ReferenceMapperBuilder It is used in the context of Boolean Target/Tool Mapping |
| RefitFace | Represents a refit face feature To create or edit an instance of this class, use NXOpen::Features::RefitFaceBuilder Created in NX6.0.0 |
| RefitFaceBuilder | Represents a NXOpen::Features::RefitFace builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateRefitFaceBuilder Default values |
| RegionListItemBuilder | Represents a Features::RegionListItemBuilder builder To create a new instance of this class, use NXOpen::Features::VarOffsetFaceBuilder::CreateRegionListItem Default values |
| RegionListItemBuilderList | Represents a list of objects |
| RemoveParametersBuilder | Represents a NXOpen::Features::RemoveParametersBuilder |
| ReorderBlends | Represents a reorder blends feature To create or edit an instance of this class, use NXOpen::Features::ReorderBlendsBuilder Created in NX7.5.1 |
| ReorderBlendsBuilder | Represents a NXOpen::Features::ReorderBlends builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateReorderBlendsBuilder Created in NX7.5.1 |
| ReplaceBlend | Represents a replace blend feature To create or edit an instance of this class, use NXOpen::Features::ReplaceBlendBuilder Created in NX7.0.0 |
| ReplaceBlendBuilder | Represents a builder for a Replace Blend feature |
| ReplaceFace | Represents a replace face feature , don't use it until nx502 To create or edit an instance of this class, use NXOpen::Features::ReplaceFaceBuilder Created in NX5.0.2 |
| ReplaceFaceBuilder | Represents a builder for a replace face feature, don't use it until nx502 |
| ReplaceFeatureBuilder | Represents a replace feature builder |
| ResizeBendAngle | Represents a resize bend angle feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::ResizeBendAngleBuilder Created in NX5.0.0 |
| ResizeBendRadius | Represents a resize bend radius feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::ResizeBendRadiusBuilder Created in NX5.0.0 |
| ResizeBlend | Represents a resize blend feature , don't use it until nx502 To create or edit an instance of this class, use NXOpen::Features::ResizeBlendBuilder Created in NX5.0.2 |
| ResizeBlendBuilder | Represents a builder for a resize blend feature, don't use it until nx502 |
| ResizeChamfer | Represents a resize chamfer feature To create or edit an instance of this class, use NXOpen::Features::ResizeChamferBuilder Created in NX7.0.0 |
| ResizeChamferBuilder | Represents a NXOpen::Features::ResizeChamfer builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateResizeChamferBuilder Default values |
| ResizeChamferCurve | Represents a resize chamfer curve feature To create or edit an instance of this class, use NXOpen::Features::ResizeChamferCurveBuilder Created in NX10.0.0 |
| ResizeChamferCurveBuilder | Represents a NXOpen::Features::ResizeChamferCurve builder To create a new instance of this class, use NXOpen::Features::SynchronousCurveCollection::CreateResizeChamferCurveBuilder Created in NX10.0.0 |
| ResizeCurve | Represents a resize curve feature To create or edit an instance of this class, use NXOpen::Features::ResizeCurveBuilder Created in NX9.0.0 |
| ResizeCurveBuilder | Represents a NXOpen::Features::ResizeCurve builder To create a new instance of this class, use NXOpen::Features::SynchronousCurveCollection::CreateResizeCurveBuilder Default values |
| ResizeFace | Represents a resize blend feature , don't use it until nx502 To create or edit an instance of this class, use NXOpen::Features::ResizeFaceBuilder Created in NX5.0.2 |
| ResizeFaceBuilder | Represents a builder for a resize face feature, don't use it until nx502 |
| ResizeNeutralFactor | Represents a resize neutral factor feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::ResizeNeutralFactorBuilder Created in NX5.0.0 |
| ResizePlane | Represents a Resize Datum Plane feature To create or edit an instance of this class, use NXOpen::Features::ResizePlaneBuilder Created in NX6.0.3 |
| ResizePlaneBuilder | Represents a NXOpen::Features::ResizePlane builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateResizePlaneBuilder Created in NX6.0.3 |
| Revolve | Represents a revolve feature |
| RevolveBuilder | Represents a revolve builder |
| Rib | Represents a rib feature To create or edit an instance of this class, use NXOpen::Features::RibBuilder Created in NX9.0.0 |
| Ribbon | Represents a ribbon feature To create or edit an instance of this class, use NXOpen::Features::RibbonBuilder Created in NX6.0.0 |
| RibbonBuilder | Represents a NXOpen::Features::Ribbon builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateRibbonBuilder Default values |
| RibBuilder | Represents a Features::Rib builder To create a new instance of this class, use NXOpen::Features::DesignFeatureCollection::CreateRibBuilder Default values |
| Rotor | Represents a Die CAM Rotor feature |
| RPO | Represents an RPO dimension This is an abstract class, and cannot be instantiated Created in NX4.0.0 |
| RPOBuilder | Represents a RPO builder |
| RPODimension | Represents a RPO Dimension |
| Ruled | Represents a ruled feature |
| RuledBuilder | Represents a NXOpen::Features::Ruled builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateRuledBuilder Default values |
| Scale | Represents a scale feature |
| ScaleBuilder | Represents a NXOpen::Features::Scale builder |
| ScaleCurve | Represents a scale curve feature To create or edit an instance of this class, use NXOpen::Features::ScaleCurveBuilder Created in NX11.0.0 |
| ScaleCurveBuilder | Represents a Features::ScaleCurveBuilder builder To create a new instance of this class, use NXOpen::Features::CurveFeatureCollection::CreateScaleCurveBuilder Default values |
| SectionCurve | Represents a section curves feature |
| SectionCurveBuilder | Represents a NXOpen::Features::SectionCurve builder |
| SectionEdit | Represents a section edit feature To create or edit an instance of this class, use NXOpen::Features::SectionEditBuilder Created in NX6.0.0 |
| SectionEditBuilder | Represents a NXOpen::Features::SectionEdit builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSectionEditBuilder Created in NX6.0.0 |
| SectionInertiaAnalysis | Represents a section inertia analysis feature To create or edit an instance of this class, use NXOpen::Features::SectionInertiaAnalysisBuilder Created in NX5.0.0 |
| SectionInertiaAnalysisBuilder | Represents a NXOpen::Features::SectionInertiaAnalysis builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSectionInertiaAnalysisBuilder Default values |
| SectionSurface | Represents a section surface feature To create or edit an instance of this class, use NXOpen::Features::SectionSurfaceBuilder Created in NX6.0.0 |
| SectionSurfaceBuilder | Represents a NXOpen::Features::SectionSurface builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSectionSurfaceBuilder Default values |
| SectionSurfaceBuilderEx | Represents a NXOpen::Features::SectionSurface builder |
| SelectDatumCsysList | Represents a list of objects on a selection list |
| SelectFeature | Represents a single object selection |
| SelectFeatureList | Represents a list of objects on a selection list |
| SelectFlatPattern | Represents a single object selection |
| SelectPartModule | Represents a single object selection |
| ServiceOrientedBodyFeature | Represents a body feature To create or edit an instance of this class, use NXOpen::Features::ServiceOrientedBodyFeatureBuilder Created in NX11.0.0 |
| ServiceOrientedBodyFeatureBuilder | Represents a NXOpen::Features::ServiceOrientedBodyFeature builder Not support KF |
| ServiceOrientedFeatureCurve | Represents a curve feature To create or edit an instance of this class, use NXOpen::Features::ServiceOrientedFeatureCurveBuilder Created in NX11.0.0 |
| ServiceOrientedFeatureCurveBuilder | Represents a NXOpen::Features::ServiceOrientedFeatureCurve builder Not support KF |
| Sew | Represents a sew feature |
| SewBuilder | Represents a NXOpen::Features::Sew builder |
| SheetMetalFromSolid | Represents a Sheet Metal from Solid feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::SheetMetalFromSolidBuilder Created in NX6.0.0 |
| Shelf | Represents a shelf feature To create or edit an instance of this class, use NXOpen::Features::ShelfBuilder Created in NX10.0.0 |
| ShelfBuilder | Represents a NXOpen::Features::Shelf builder To create a new instance of this class, use NXOpen::Features::AeroCollection::CreateShelfBuilder Default values |
| Shell | Represents a Shell feature |
| ShellBuilder | Represents the Shell feature builder |
| ShellFace | Represents a shell face feature To create or edit an instance of this class, use NXOpen::Features::ShellFaceBuilder Created in NX6.0.0 |
| ShellFaceBuilder | Represents a NXOpen::Features::ShellFace builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateShellFaceBuilder Default values |
| ShipCollection | This class contains the factory method for creating ship feature builder |
| iterator | Iterator for accessing the contents of the collection |
| ShowRelatedFacesBuilder | Represents a builder for a Show Related Faces |
| SilhouetteFlange | Represents a silhouette flange feature To create or edit an instance of this class, use NXOpen::Features::SilhouetteFlangeBuilder Created in NX6.0.0 |
| SilhouetteFlangeBuilder | Represents a NXOpen::Features::SilhouetteFlange builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSilhouetteFlangeBuilder Default values |
| SketchConversionReport | Represents a collection of status of conversion of features to independent sketch |
| SketchConversionStatus | Represents the status of conversion of features to independent sketch |
| SketchFeature | Represents a sketch feature This is an abstract class, and cannot be instantiated Created in NX3.0.0 |
| SketchFitCurveBuilder | Sketch Fit Curve builder class |
| SketchSplineBuilder | Sketch Spline builder class |
| SmoothCurveString | Represents a smooth section feature To create or edit an instance of this class, use NXOpen::Features::SmoothCurveStringBuilder Created in NX9.0.0 |
| SmoothCurveStringBuilder | Represents a Features::SmoothCurveString builder To create a new instance of this class, use NXOpen::Features::FreeformCurveCollection::CreateSmoothCurveStringBuilder Default values |
| SmoothRangeBuilder | Represents a NXOpen::Features::SmoothRangeBuilder builder To create a new instance of this class, use NXOpen::Features::FlowBlendBuilder::NewSmoothRange Created in NX10.0.0 |
| SmoothRangeBuilderList | Represents a list of objects |
| SmoothSpline | Represents a smooth spline feature To create or edit an instance of this class, use NXOpen::Features::SmoothSplineBuilder Created in NX6.0.0 |
| SmoothSplineBuilder | Represents a NXOpen::Features::SmoothSpline builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSmoothSplineBuilder Default values |
| SnipSurface | Represents a snip surface feature To create or edit an instance of this class, use NXOpen::Features::SnipSurfaceBuilder Created in NX6.0.0 |
| SnipSurfaceBuilder | Represents a NXOpen::Features::SnipSurface builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSnipSurfaceBuilder Default values |
| SoftBlend | Represents a Soft Blend feature |
| SolidPunch | Represents a Solid Punch feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::SolidPunchBuilder Created in NX6.0.2 |
| Sphere | Represents a sphere feature To create or edit an instance of this class, use NXOpen::Features::SphereBuilder Created in NX6.0.0 |
| SphereBuilder | Represents a NXOpen::Features::Sphere builder |
| SphericalCorner | Represents a spherical corner feature To create or edit an instance of this class, use NXOpen::Features::SphericalCornerBuilder Created in NX8.5.0 |
| SphericalCornerBuilder | Represents a NXOpen::Features::SphericalCorner builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSphericalCornerBuilder Default values |
| SpineCurve | Represents a spine curve feature To create or edit an instance of this class, use NXOpen::Features::SpineCurveBuilder Created in NX11.0.0 |
| SpineCurveBuilder | Represents a Features::SpineCurve builder To create a new instance of this class, use NXOpen::Features::FreeformCurveCollection::CreateSpineCurveBuilder Default values |
| SplitBody | Represents a split body feature |
| SplitBodyBuilder | Represents a NXOpen::Features::SplitBody builder |
| Step | Represents a step feature To create or edit an instance of this class, use NXOpen::Features::StepBuilder Created in NX10.0.0 |
| StepBuilder | Represents a NXOpen::Features::Step builder To create a new instance of this class, use NXOpen::Features::AeroCollection::CreateStepBuilder Default values |
| StudioSpline | Represents a studio spline feature To create or edit an instance of this class, use NXOpen::Features::StudioSplineBuilderEx Created in NX5.0.0 |
| StudioSplineBuilder | Studio Spline builder class |
| StudioSplineBuilderEx | Studio Spline builder class |
| StudioSurface | Represents a studio surface feature To create or edit an instance of this class, use NXOpen::Features::StudioSurfaceBuilder Created in NX5.0.0 |
| StudioSurfaceBuilder | Represents a NXOpen::Features::StudioSurface builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateStudioSurfaceBuilder Default values |
| StudioSurfaceBuilderEx | Represents a Features::StudioSurfaceEx builder To create a new instance of this class, use NXOpen::Features::FreeformSurfaceCollection::CreateStudioSurfaceBuilderEx Default values |
| StudioSurfaceEx | Represents a new studio surface feature To create or edit an instance of this class, use NXOpen::Features::StudioSurfaceBuilderEx Created in NX8.5.0 |
| StudioXform | Represents a studio xform feature To create or edit an instance of this class, use NXOpen::Features::StudioXformBuilderEx Created in NX6.0.0 |
| StudioXformBuilder | Represents a NXOpen::Features::StudioXform builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateStudioXformBuilder Default values |
| StudioXformBuilderEx | Represents a NXOpen::Features::StudioXform builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateStudioXformBuilderEx Default values |
| StyledBlend | Represents a styled blend feature To create or edit an instance of this class, use NXOpen::Features::StyledBlendBuilder Created in NX6.0.0 |
| StyledBlendBuilder | Represents a NXOpen::Features::StyledBlend builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateStyledBlendBuilder Default values |
| StyledCorner | Represents a styled corner feature To create or edit an instance of this class, use NXOpen::Features::StyledCornerBuilder Created in NX6.0.0 |
| StyledCornerBuilder | Represents a NXOpen::Features::StyledCorner builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateStyledCornerBuilder Default values |
| StyledSweep | Represents a styled sweep feature To create or edit an instance of this class, use NXOpen::Features::StyledSweepBuilder Created in NX6.0.0 |
| StyledSweepBuilder | Represents a NXOpen::Features::StyledSweep builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateStyledSweepBuilder Default values |
| Subtract | Represents a Subtract feature |
| SweepAlongGuide | Represents a sweep along guide feature To create or edit an instance of this class, use NXOpen::Features::SweepAlongGuideBuilder Created in NX6.0.0 |
| SweepAlongGuideBuilder | Represents a NXOpen::Features::SweepAlongGuide builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSweepAlongGuideBuilder Default values |
| SweepFeatureCollection | Manages sweep-like features |
| Swept | Represents a swept feature To create or edit an instance of this class, use NXOpen::Features::SweptBuilder Created in NX5.0.0 |
| SweptBuilder | Represents a NXOpen::Features::Swept builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSweptBuilder Default values |
| SweptVolume | Represents a swept volume feature To create or edit an instance of this class, use NXOpen::Features::SweptVolumeBuilder Created in NX9.0.0 |
| SweptVolumeBuilder | Represents a NXOpen::Features::SweptVolume builder To create a new instance of this class, use NXOpen::Features::SweepFeatureCollection::CreateSweptVolumeBuilder Default values |
| Symmetric | Represents a symmetric feature |
| SymmetricBuilder | Represents a NXOpen::Features::Symmetric builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateSymmetricBuilder Default values |
| SynchronousCurveCollection | This class contains the factory method for creating ST curve builder |
| iterator | Iterator for accessing the contents of the collection |
| SynchronousEdgeCollection | This class contains the factory method for creating ship feature builder |
| iterator | Iterator for accessing the contents of the collection |
| Tab | Represents a Tab feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::TabBuilder Created in NX5.0.0 |
| TabNoteCfgBuilder | Represents a NXOpen::Features::TabNoteCfgBuilder |
| Tangent | Represents a tangent feature To create or edit an instance of this class, use NXOpen::Features::TangentBuilder Created in NX6.0.0 |
| TangentBuilder | Represents a NXOpen::Features::Tangent builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateTangentBuilder Default values |
| TestFeature | Represents a test feature To create or edit an instance of this class, use NXOpen::Features::TestFeatureBuilder Created in NX9.0.0 |
| TestFeatureBuilder | Represents a Features.Newapp.TestFeature builder |
| Text | Represents a text feature To create or edit an instance of this class, use NXOpen::Features::TextBuilder Created in NX7.5.1 |
| TextBuilder | Represents a NXOpen::Features::Text builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateTextBuilder Default values |
| Texture | Represents a Texture feature |
| TextureBuilder | Represents a Texture builder To create a new instance of this class, use NXOpen::Features::FreeformSurfaceCollection::CreateTextureBuilder Default values |
| Thicken | Represents a thicken feature |
| ThickenBuilder | Represents a builder for a NXOpen::Features::Thicken feature |
| ThreeBendCorner | Represents a ThreeBendCorner feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::ThreeBendCornerBuilder Created in NX5.0.0 |
| ThroughCurveMesh | Represents a through curve mesh feature |
| ThroughCurveMeshBuilder | Represents a NXOpen::Features::ThroughCurveMesh builder |
| ThroughCurves | Represents a Through Curves feature |
| ThroughCurvesBuilder | Represents a NXOpen::Features::ThroughCurves builder |
| ToolingBox | Represents a tooling box feature To create or edit an instance of this class, use NXOpen::Features::ToolingBoxBuilder Created in NX10.0.0 |
| ToolingBoxBuilder | Represents a NXOpen::Features::ToolingBox builder To create a new instance of this class, use NXOpen::Features::ToolingFeatureCollection::CreateToolingBoxBuilder Default values |
| ToolingCollection | This class contains the factory method for creating tooling feature builder |
| iterator | Iterator for accessing the contents of the collection |
| ToolingFeatureCollection | This class contains the factory method for creating tooling feature builder |
| iterator | Iterator for accessing the contents of the collection |
| TrackingData | Represents tracking information for outputs created by custom feature |
| TrimAndExtend | Represents a trim and extend feature To create or edit an instance of this class, use NXOpen::Features::TrimAndExtendBuilder Created in NX9.0.0 |
| TrimAndExtendBuilder | Represents a NXOpen::Features::TrimAndExtend builder To create a new instance of this class, use NXOpen::Features::TrimFeatureCollection::CreateTrimAndExtendBuilder Default values |
| TrimBody | Represents a Trim Body feature |
| TrimBody2 | Represents a trim body feature |
| TrimBody2Builder | Represents a NXOpen::Features::TrimBody2 builder for Trim Body feature |
| TrimBodyBuilder | Represents the trim body feature builder |
| TrimCornerBuilder | Represents a builder for non-associative trim corner operation |
| TrimCurve | Represents a trim curve feature To create or edit an instance of this class, use NXOpen::Features::TrimCurveBuilder Created in NX5.0.0 |
| TrimCurve2 | Represents a new trim curve feature feature To create or edit an instance of this class, use NXOpen::Features::TrimCurve2Builder Created in NX11.0.1 |
| TrimCurve2Builder | Represents a NXOpen::Features::TrimCurve2 builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateTrimCurve2FeatureBuilder Default values |
| TrimCurveBuilder | Represents a NXOpen::Features::TrimCurve builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateTrimCurveBuilder Default values |
| TrimExtend | Represents a trim extend feature |
| TrimExtendBuilder | Represents a NXOpen::Features::TrimExtend builder |
| TrimFeatureCollection | Manages design features |
| TrimLineDevelopment | Represents a trim line development feature To create or edit an instance of this class, use NXOpen::Die::TrimLineDevelopmentBuilder Created in NX6.0.0 |
| TrimSheet | Represents a trim sheet feature |
| TrimSheetBuilder | Represents a NXOpen::Features::TrimSheet builder |
| Tube | Represents a tube feature To create or edit an instance of this class, use NXOpen::Features::TubeBuilder Created in NX5.0.0 |
| TubeBuilder | Represents a NXOpen::Features::Tube builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateTubeBuilder Default values |
| Unbend | Represents a Unbend feature To create or edit an instance of this class, use NXOpen::Features::SheetMetal::UnbendBuilder Created in NX5.0.0 |
| UnitCellEditorBuilder | The unit cell editor allows an application to create, store and edit a lattice unit cell |
| Unite | Represents a Unite feature |
| UniversalUnform | Represents a UniversalUnform feature To create or edit an instance of this class, use NXOpen::Tooling::UniversalUnformBuilder Created in NX8.5.0 |
| Unsew | Represents a Unsew feature To create or edit an instance of this class, use NXOpen::Features::UnsewBuilder Created in NX5.0.0 |
| UnsewBuilder | Represents a NXOpen::Features::Unsew builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateUnsewBuilder Default values |
| Untrim | Represents a Untrim feature |
| UntrimBuilder | Represents a NXOpen::Features::Untrim builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateUntrimBuilder Created in NX5.0.0 |
| UserDefinedFeatureApplicationData | JA interface for UserDefinedFeatureApplicationData object Created in NX8.0.0 |
| UserDefinedFeatureApplicationField | JA interface for UserDefinedFeatureApplicationField object Created in NX8.0.0 |
| UserDefinedFeatureClass | JA interface for UserDefinedFeatureClass An instance of this class can be obtained from Features::UserDefinedFeatureClassManager::CreateClass Created in NX8.0.0 |
| UserDefinedFeatureClassManager | JA interface for the UserDefinedFeatureClassManager object To obtain an instance of this class, refer to NXOpen::Session Created in NX8.0.0 |
| UserDefinedFeatureCopyEvent | JA interface for the UserDefinedFeatureCopyEvent object This calls cannot be created Created in NX8.0.0 |
| UserDefinedFeatureCreateEvent | JA interface for the UserDefinedFeatureCreateEvent object This calls cannot be created Created in NX8.0.0 |
| UserDefinedFeatureDeleteOrSuppressEvent | JA interface for the UserDefinedFeatureDeleteOrSuppressEvent object This calls cannot be created Created in NX1847.0.0 |
| UserDefinedFeatureEditEvent | JA interface for the UserDefinedFeatureEditEvent object This calls cannot be created Created in NX8.0.0 |
| UserDefinedFeatureExpressionData | JA interface for UserDefinedFeatureExpressionData object |
| UserDefinedFeatureIconEvent | JA interface for the UserDefinedFeatureIconEvent object This calls cannot be created Created in NX8.0.0 |
| UserDefinedFeatureReferenceData | JA interface for UserDefinedFeatureReference object |
| UserDefinedFeatureUpdateEvent | JA interface for the UserDefinedFeatureUpdateEvent object This calls cannot be created Created in NX8.0.0 |
| UserDefinedObjectFeature | Represents a User Defined Object feature |
| UserDefinedObjectFeatureBuilder | Represents a user defined object feature builder |
| VariableOffset | Represents a variable offset feature To create or edit an instance of this class, use NXOpen::Features::VariableOffsetBuilder Created in NX8.0.0 |
| VariableOffsetBuilder | Represents a NXOpen::Features::VariableOffset builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateVariableOffsetBuilder Default values |
| VariableRadiusPointsBuilder | Represents a NXOpen::Features::VariableRadiusPointsBuilder builder To create a new instance of this class, use NXOpen::Features::FlowBlendBuilder::NewControlPoint Created in NX10.0.0 |
| VariableRadiusPointsBuilderList | Represents a list of objects |
| VarOffsetFace | Represents a var offset face feature To create or edit an instance of this class, use NXOpen::Features::VarOffsetFaceBuilder Created in NX11.0.0 |
| VarOffsetFaceBuilder | Represents a Features::VarOffsetFace builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateVarOffsetFaceBuilder Default values |
| Varsweep | Represents a Varsweep feature |
| VarsweepBuilder | Represents a Variational Sweep feature builder |
| VehicleDesignCollection | This class contains the factory method for creating vehicle design feature builder |
| iterator | Iterator for accessing the contents of the collection |
| VirtualBlendEdgeBuilder | Represents a NXOpen::Features::VirtualBlendEdgeBuilder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateVirtualBlendEdgeBuilder Created in NX7.0.1 |
| VirtualCurve | Represents a virtual curve feature To create or edit an instance of this class, use NXOpen::Features::VirtualCurveBuilder Created in NX7.5.0 |
| VirtualCurveBuilder | Represents a NXOpen::Features::VirtualCurve builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateVirtualCurveBuilder Default values |
| WaveDatum | Represents a WAVEDATUM feature To create or edit an instance of this class, use NXOpen::Features::WaveDatumBuilder Created in NX5.0.0 |
| WaveDatumBuilder | Represents a Wave Datum builder |
| WaveInterfaceLinkerBuilder | Represents a WaveInterfacelinker Feature builder To create a new instance of this class, use NXOpen::Features::BaseFeatureCollection::CreateWaveInterfaceLinkerBuilder Default values |
| WaveLink | Represents a wavelink feature |
| WaveLinkBuilder | Represents a Wavelink Feature builder |
| WavePoint | Represents a wavepoint feature To create or edit an instance of this class, use NXOpen::Features::WavePointBuilder Created in NX5.0.0 |
| WavePointBuilder | Represents a Features::Feature builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateWavePointBuilder Default values |
| WaveRouting | Represents a waverouting feature To create or edit an instance of this class, use NXOpen::Features::WaveRoutingBuilder Created in NX5.0.0 |
| WaveRoutingBuilder | Represents a NXOpen::Features::WaveRoutingBuilder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateWaveRoutingBuilder Default values |
| WaveSketch | Represents a WAVESKETCH feature To create or edit an instance of this class, use NXOpen::Features::WaveSketchBuilder Created in NX5.0.1 |
| WaveSketchBuilder | Represents a WaveSketchBuilder |
| WrapBuilder | Represents a NXOpen::Features::WrapUnwrap builder |
| WrapGeometry | Represents a wrap geometry feature To create or edit an instance of this class, use NXOpen::Features::WrapGeometryBuilder Created in NX6.0.0 |
| WrapGeometryBuilder | Represents a NXOpen::Features::WrapGeometry builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateWrapGeometryBuilder Default values |
| WrapUnwrap | Represents a wrap or unwrap curve feature To create or edit an instance of this class, use NXOpen::Features::WrapBuilder Created in NX6.0.0 |
| Fields | Provides classes and interfaces for Fields |
| ComplexScalarFieldWrapper | This class defines a complex value that is internally backed up by a field or two expressions |
| ComplexVectorFieldWrapper | This class defines a complex value that is internally backed up by a field or six expressions |
| DisplayPropertiesBuilder | Represents a builder class for editing display properties of a NXOpen::Fields::Field |
| ExportData | Represents data for field export |
| ExternalFileProfileBuilder | Represents a builder class for creating and editing an NXOpen::Fields::Field that is defined by an external file reference |
| Field | Represents an Field abstract class |
| FieldCollection | Represents a collection of Fields To obtain an instance of this class, refer to NXOpen::Fields::FieldManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FieldDomain | Represents the Field Domains |
| FieldDomainCollection | Provides methods for manipulating the field domains To obtain an instance of this class, refer to NXOpen::Fields::FieldManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FieldDrawHelper | Represents Field_DrawHelper |
| FieldEvaluator | Represents a Field Evaluator which can be used to evaluate a NXOpen::Fields::Field |
| FieldExpression | Represents the Field Expression class |
| FieldFormula | Represents the Field Formula class |
| FieldLink | Represents the Field Link class |
| FieldLinksTable | Represents the Field LinksTable class |
| FieldManager | Represents the manager class of the Fields |
| FieldReference | Represents an reference field |
| FieldTable | Represents the Field Table class |
| FieldVariable | Represents the Field Variables |
| Bounds | Variable Bounds structure |
| FieldWrapper | This class defines a value that is internally backed up by a field |
| IApplication | Interface for all applications registered with the Field subsystem |
| IApplicationData | Interface for all application specific data to be registered on fields |
| ImportBuilder | Represents a Fields::ImportBuilder builder To create a new instance of this class, use NXOpen::Fields::FieldManager::CreateImportBuilder Default values |
| ImportData | Represents data transfer objectst for field import |
| ImportTableDataBuilder | Represents a NXOpen::Fields::ImportTableDataBuilder builder which can be used to import data for NXOpen::Fields::FieldTable To create a new instance of this class, use NXOpen::Fields::FieldManager::CreateImportTableDataBuilderFromTable Created in NX1847.0.0 |
| NameVariable | This class stores the common name and measure for field variables |
| PathObjects | Contains objects that define a lattice path |
| PathObjectsList | Represents a list of objects |
| ScalarFieldWrapper | This class defines a scalar value that is internally backed up by a (optionally scaled) field or an expression |
| SketchProfileBuilder | Represents a builder class for creating and editing an NXOpen::Fields::Field that is defined by a sketch |
| SpatialMap | Represents the Field Domain Map |
| SpatialMapBuilder | Represents a NXOpen::Fields::SpatialMap builder |
| TimeSeriesProfileBuilder | Represents a builder class for creating and editing an NXOpen::Fields::Field |
| VectorFieldWrapper | This class defines a vector value that is internally backed up by a (optionally scaled) field or three expressions |
| Formboard | Provides interfaces and classes to the Routing Electrical Formboard functionality |
| FaceAnnotationBuilder | Builder for Face Annotation functionality used in formboard |
| FlipComponentBuilder | Builder for flip component operation used in formboard |
| FormboardLayoutBuilder | Class that performs the "layout" of Formboard geometry |
| FormboardManager | Contains information about flattened harness drawing and drafting data for harness manufacturing drawings (Formboard Drawings) |
| LayoutLengthOptions | Defines the various options for determining the rounded lengths of formboard geometry during the layout or update process |
| ObjectAttributeReferenceBuilder | Builder for "object attribute" used in formboard which enbles user to create annotation in drafting functionality |
| OrientBranchBuilder | Builder for "Orient Branch" operation used in formboard |
| PathLengthAnnotationBuilder | TODO Class documentation To create a new instance of this class, use NXOpen::Formboard::FormboardManager::CreatePathLengthAnnotationBuilder Default values |
| ShapeSegmentBuilder | Builder for Face Annotation functionality used in formboard |
| UpdateDiscrepancy | Defines a discrepancy object which contains information about a specific difference between the formboard drawing and the 3D harness model |
| UpdateFormboardBuilder | Class that performs the "update" of Formboard geometry |
| Gateway | Provides classes and interfaces for Gateway |
| BaseExplicitOrderBuilder | This is the NXOpen::Gateway::BaseExplicitOrderBuilder for the explicit order This is an abstract class, and cannot be instantiated |
| BookmarkFile | Represents operations which can be done on bookmark files |
| CopyCutBuilder | Represents a NXOpen::Gateway::CopyCutBuilder To create a new instance of this class, use NXOpen::ClipboardOperationsManager::CreateCopyCutBuilder Created in NX7.5.0 |
| GenericFileNewBuilder | Represents a builder class that performs Generic File New operations |
| IGenericFileNewApplicationBuilder | Represents the class Application Builder |
| ImageCaptureBuilder | Represents a NXOpen::Gateway::ImageCaptureBuilder builder To create a new instance of this class, use NXOpen::Gateway::ImageCaptureManager::CreateImageCaptureBuilder Default values |
| ImageCaptureManager | ImageCaptureManager class To obtain an instance of this class, refer to NXOpen::BasePart Created in NX7.5.0 |
| ImageExportBuilder | Captures the image in the active graphics window (or in a rectangular region of the active graphics window), and then exports/saves the image in a file of a specified format |
| PasteBuilder | Represents a NXOpen::Gateway::PasteBuilder To create a new instance of this class, use NXOpen::ClipboardOperationsManager::CreatePasteBuilder Created in NX7.5.0 |
| GeometricAnalysis | Provides classes and interfaces for Geometric Analysis |
| SectionAnalysis | Provides classes and interfaces for Section Analysis |
| CircularGridBuilder | Represents the circular grid section specifications for a NXOpen::GeometricAnalysis::SectionAnalysis::SectionAnalysisBuilder |
| CurveAlignedBuilder | Represents the Curve Aligned specification for a NXOpen::GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder |
| GridSpacingBuilder | Represents the grid spacing for certain types of section specifications for the NXOpen::GeometricAnalysis::SectionAnalysis::SectionAnalysisBuilder |
| InteractiveBuilder | Represents the Interactive specification for a NXOpen::GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder |
| IsoparametricBuilder | Represents the Isoparametric specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder |
| ParallelPlanesExBuilder | Represents the Parallel Plane specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder |
| QuadrilateralGridBuilder | Represents the quadrilateral grid section specifications for a GeometricAnalysis::SectionAnalysis::SectionAnalysisBuilder |
| RadialBuilder | Represents the Radial specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder |
| SectionAnalysisBuilder | Represents a NXOpen::GeometricAnalysis::SectionAnalysisObject builder |
| SectionAnalysisExBuilder | Represents a NXOpen::GeometricAnalysis::SectionAnalysis::SectionAnalysisExObject builder To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateSectionAnalysisExBuilder Default values |
| SectionAnalysisExObject | Represents a Section Analysis Object of the new version |
| SectionPlaneBuilder | Represents a plane which is used to cut sections on faces or facet bodies Created in NX7.0.0 |
| TriangularGridBuilder | Represents the triangular grid section specifications for a SectionAnalysisBuilder |
| XYZPlaneBuilder | Represents the XYZ Plane specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder |
| AnalysisManager | Represents the collection of analysis commands |
| AnalysisObject | Represents an Analysis Object This is an abstract class, and cannot be instantiated Created in NX5.0.0 |
| AnalysisObjectCollection | Create a AnalysisObjectCollection To obtain an instance of this class, refer to NXOpen::GeometricAnalysis::AnalysisManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| AnalysisObjectCollectionEx | Collection of analysis objects To obtain an instance of this class, refer to NXOpen::GeometricAnalysis::AnalysisObjectCollection Created in NX11.0.0 |
| CurveAnalysisCombsBuilder | This class handles the options setting for the curve analysis information (Curvature Combs) display |
| CurveAnalysisDisplay | Represents a tool to control whether to show a curve's poles,knots,combs,peaks and inflections To obtain an instance of this class, refer to NXOpen::GeometricAnalysis::AnalysisObjectCollection Created in NX6.0.0 |
| CurveAnalysisInflectionsBuilder | This class handles the options setting for the curve analysis information (Inflections) display |
| CurveAnalysisPeaksBuilder | This class handles the options setting for the curve analysis information (Peaks) display |
| CurveAnalysisRecord | Represents the information regarding how to display a curve's poles, knots, combs, peaks and inflections |
| CurveContinuity | Represents a Curve Continuity Analysis builder To create or edit an instance of this class, use NXOpen::GeometricAnalysis::CurveContinuityBuilder Created in NX7.0.0 |
| CurveContinuityBuilder | Represents a curve continuity builder To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateCurveContinuityBuilder Default values |
| CurveCurvatureAnalysis | Represents a CurveCurvatureAnalysis builder To create or edit an instance of this class, use NXOpen::GeometricAnalysis::CurveCurvatureAnalysisBuilder Created in NX7.0.0 |
| CurveCurvatureAnalysisBuilder | Represents a NXOpen::GeometricAnalysis::CurveCurvatureAnalysis builder To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateCurveCurvatureAnalysisBuilder Default values |
| DeviationChecking | Represents a NXOpen::GeometricAnalysis::DeviationChecking To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisManager::CreateDeviationCheckingObject Created in NX6.0.0 |
| DeviationGauge | Deviation Gauge analysis object class To create or edit an instance of this class, use NXOpen::GeometricAnalysis::DeviationGaugeBuilder Created in NX6.0.0 |
| DeviationGaugeBuilder | DeviationGaugeBuilder class To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateDeviationGaugeBuilder Default values |
| DistanceAnalysisBuilder | Represents a Distance Analysis builder |
| DraftAnalysis | Represents a Draft Analysis builder To create or edit an instance of this class, use NXOpen::GeometricAnalysis::DraftAnalysisBuilder Created in NX8.0.0 |
| DraftAnalysisBuilder | Represents a Draft Analysis builder To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateDraftAnalysisBuilder Default values |
| DupinBuilder | The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface |
| ExamineGeometry | Represents the Examine Geometry class To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisManager::CreateExamineGeometryObject Created in NX5.0.0 |
| FaceAnalysis | Represents a face analysis To create or edit an instance of this class, use NXOpen::GeometricAnalysis::ReflectionAnalysisBuilder Created in NX11.0.0 |
| FaceAnalysisDataRangeBuilder | Represents data range functions used by Face Analysis |
| FaceAnalysisDisplayBuilder | Represents a set of display settings used by Face Analysis |
| FaceAnalysisNormalsBuilder | Represents reverse normal functions used by Face Analysis |
| FaceCurvatureAnalysis | Represents a Face Curvature Analysis builder To create or edit an instance of this class, use NXOpen::GeometricAnalysis::FaceCurvatureAnalysisBuilder Created in NX8.0.0 |
| FaceCurvatureAnalysisBuilder | Represents a NXOpen::GeometricAnalysis::FaceCurvatureAnalysisBuilder builder |
| GapFlushness | Gap and Flushness analysis object class To create or edit an instance of this class, use NXOpen::GeometricAnalysis::GapFlushnessBuilder Created in NX5.0.0 |
| GapFlushnessBuilder | GapFlushnessBuilder class To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateGapFlushnessBuilder Default values |
| GeometricProperties | Represents the Geometric Properties class |
| CaeCurve | CAE Edge/Curve Geometric Properties |
| CaeFace | CAE Face Geometric Properties |
| Edge | Edge/Curve Geometric Properties |
| Face | Face Geometric Properties |
| HighlightLinesAnalysis | Represents a Highlight Lines Analysis object |
| HighlightLinesAnalysisBuilder | Represents a NXOpen::GeometricAnalysis::HighlightLinesAnalysis builder |
| LocalRadiusAnalysis | Builder for Local Radius Analysis (formerly Dynamic Radius) To create or edit an instance of this class, use NXOpen::GeometricAnalysis::LocalRadiusAnalysisBuilder Created in NX8.5.0 |
| LocalRadiusAnalysisBuilder | Represents a NXOpen::GeometricAnalysis::LocalRadiusAnalysis builder To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateLocalRadiusAnalysisBuilder Default values |
| RadiusAnalysisBuilder | Represents a Radius Analysis builder |
| ReflectionAnalysisBuilder | Represents a Reflection Analysis builder |
| SectionAnalysisObject | Represents a Section Analysis object |
| SimpleInterference | Represents the Simple Interference object |
| SlopeAnalysisBuilder | Represents a Slope Analysis builder |
| SolidDensity | Represents a NXOpen::GeometricAnalysis::SolidDensity To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisManager::CreateSolidDensityObject Created in NX5.0.0 |
| SurfaceAnalysisDisplay | Represents a tool control whether to show a surface's poles and knots To obtain an instance of this class, refer to NXOpen::GeometricAnalysis::AnalysisObjectCollection Created in NX6.0.0 |
| SurfaceContinuityAnalysis | Represents a SurfaceContinuityAnalysis builder To create or edit an instance of this class, use NXOpen::GeometricAnalysis::SurfaceContinuityAnalysisBuilder Created in NX6.0.0 |
| SurfaceContinuityAnalysisBuilder | Represents a NXOpen::GeometricAnalysis::SurfaceContinuityAnalysis builder To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateSurfaceContinuityAnalysisBuilder Default values |
| SurfaceIntersection | Represents a SurfaceIntersection builder To create or edit an instance of this class, use NXOpen::GeometricAnalysis::SurfaceIntersectionBuilder Created in NX7.5.0 |
| SurfaceIntersectionBuilder | Represents a NXOpen::GeometricAnalysis::SurfaceIntersection builder To create a new instance of this class, use NXOpen::GeometricAnalysis::AnalysisObjectCollection::CreateSurfaceIntersectionBuilder Default values |
| GeometricUtilities | Provides classes and interfaces for Geometric Utilities |
| UVMapping | Provides classes and interfaces for UV editing utilities |
| MakeSymmetricParameterizationData | Make UV parameterization symmetric |
| ReverseUVParameterizationData | Reverse UV parameterization |
| SelectUVMeshObjectData | Represents UV mesh topology object selection |
| TransformUVParameterizationData | Transform UV parameterization by transforming patches in UV spaces |
| UVMappingCollection | This class contains the methods for creating and manipulating a UVMapping object |
| UVMeshManipulatorData | UV Mesh manipulation tool |
| UVParameterizationBuilder | Represents a UVParameterization builder To create a new instance of this class, use NXOpen::GeometricUtilities::UVMapping::UVMappingCollection::CreateUVParameterizationBuilder Created in NX1847.0.0 |
| AlignmentMethodBuilder | Represents a NXOpen::GeometricUtilities::AlignmentMethodBuilder |
| AlongPathPattern | AlongPath pattern definition |
| AlongSpineBuilder | Represents a NXOpen::GeometricUtilities::AlongSpineBuilder |
| AnchorLocatorBuilder | Represents a NXOpen::GeometricUtilities::AnchorLocatorBuilder Created in NX6.0.0 |
| AngularLimits | Represents a angular limts data |
| AngularPatternSpacing | Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
| BetweenLocationsData | Represents a NXOpen::GeometricUtilities::BetweenLocationsData |
| BlendLimitsData | Represents a NXOpen::GeometricUtilities::BlendLimitsData |
| BlendSetbackBuilder | This class provides ability to define a setback curve on a blend face |
| BlendSetbackBuilderList | Represents a list of objects |
| BlendStopshortBuilder | Represents a NXOpen::GeometricUtilities::BlendStopshortBuilder |
| BlendStopshortBuilderCollection | This class contains the factory methods for creating an BlendStopshortBuilder |
| iterator | Iterator for accessing the contents of the collection |
| BooleanOperation | Represents a boolean operation |
| BooleanRegionSelect | Class which defines boolean region select |
| BooleanToolBuilder | Class which defines boolean tool builder |
| BoundaryDefinitionBuilder | Represents a NXOpen::GeometricUtilities::BoundaryDefinitionBuilder |
| BoundaryDefinitionBuilderList | Represents a list of objects |
| BoundingObjectBuilder | Represents a NXOpen::GeometricUtilities::BoundingObjectBuilder |
| BoundingObjectBuilderList | Represents a list of objects |
| BridgeCurveConnectivity | Data offering connectivity controls for NXOpen::Features::BridgeCurveBuilderEx |
| CAMDataPrepManager | Contains the create functions for builders |
| CircularCrossSection | Represents a circular section data for face blend |
| CircularFrameBuilder | Represents a NXOpen::GeometricUtilities::CircularFrameBuilder |
| CircularPattern | Circular pattern definition |
| ColorCodedRegionBuilder | Represents a NXOpen::GeometricUtilities::ColorCodedRegionBuilder |
| CombOptionsBuilder | Represents a NXOpen::GeometricUtilities::CombOptionsBuilder |
| ConicCrossSection | Represents a conic section data for face blend |
| Continuity | Represents a NXOpen::GeometricUtilities::Continuity Allows user to specify continuity constraint surface construction |
| ControlPoleManagerData | This class manages the control poles for a set of surfaces or curves |
| ConvertFeatureGroupsToModulesBuilder | Represents a NXOpen::GeometricUtilities::ConvertFeatureGroupsToModulesBuilder builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateConvertFeatureGroupsToModulesBuilder Created in NX9.0.0 |
| CurveExtendData | Represents a NXOpen::GeometricUtilities::CurveExtendData Created in NX5.0.0 |
| CurveExtensionBuilder | Spline extension builder class |
| CurveFitData | Represents the curve fitting methods options |
| CurveFitJoin | Represents the curve fit join data |
| CurveFitOptions | Represents the curve fit data |
| CurveLengthBuilder | Represents a NXOpen::GeometricUtilities::CurveLengthBuilder builder |
| CurveLengthData | Represents an CurveLength data |
| CurveLimitsData | Represents a NXOpen::GeometricUtilities::CurveLimitsData Created in NX5.0.0 |
| CurveOptions | Represents the curve options data |
| CurveRangeBuilder | Represents the curve range and anchor builder Created in NX6.0.0 |
| CurveSettings | Represents the curve settings data |
| CurveShapingBuilder | Represents a NXOpen::GeometricUtilities::CurveShapingBuilder |
| DegreesAndSegmentsOrPatchesBuilder | DegreesAndSegmentsOrPatches builder Created in NX6.0.0 |
| DepthSkewBuilder | This class provides ability to specify a depth and a skew value |
| DesignMeshBody | Represents a faceted mesh |
| DesignMeshEdge | Represents a facet mesh edge |
| DesignMeshFace | Represents a facet mesh face |
| DesignMeshVertex | Represents a facet mesh vertex |
| DisplayResolutionBuilder | Represents a NXOpen::GeometricUtilities::DisplayResolutionBuilder |
| DistancePatternSpacing | Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
| DraftPointData | Represents a draft point data object To create an instance of this class, see DraftPointDataCollection::CreateDraftPointData Created in NX4.0.0 |
| DraftVariableAngleData | Represents data containing variable angle draft point data objects This class will not be created by the user |
| EndHoleData | Represents a NXOpen::GeometricUtilities::EndHoleData Created in NX5.0.2 |
| EntityUsageInfo | Represents a NXOpen::GeometricUtilities::EntityUsageInfo |
| EntityUsageInfoList | Represents a list of objects |
| Extend | Represents an extend data |
| ExtrudeRevolveToolBuilder | Class which is a sub-component of BooleanTool |
| FaceChangeOverflowBehavior | Represents a NXOpen::GeometricUtilities::FaceChangeOverflowBehavior It provides several face change options for controlling behavior when a change face overflows an incident face |
| FacePlaneSelectionBuilder | Represents a NXOpen::GeometricUtilities::FacePlaneSelectionBuilder |
| FacePlaneSelectionBuilderCollection | This class contains the factory methods for creating an FacePlaneSelectionBuilder |
| iterator | Iterator for accessing the contents of the collection |
| FacePlaneToolBuilder | Sub-component of BooleanToolBuilder |
| FaceSetData | Represents a NXOpen::GeometricUtilities::FaceSetData |
| FaceSetDataCollection | This class contains the factory methods for creating an FaceSetData |
| iterator | Iterator for accessing the contents of the collection |
| FaceSetOffset | This class represents a face set (collector) offset data |
| FaceSetOffsetCollection | This class contains the factory methods for creating an face set offset |
| iterator | Iterator for accessing the contents of the collection |
| FaceSetOffsetList | Represents a list of objects |
| FeatureOffset | Represents a Offset |
| FeatureOptions | Represents various options supported on features |
| FlowDirection | Represents a NXOpen::GeometricUtilities::FlowDirection Allows user to specify different flow direction to control output surface shape |
| FrameOnPathBuilder | Frame on path builder Created in NX7.5.1 |
| FtmFixedCurvesBuilder | Represents a NXOpen::GeometricUtilities::FtmFixedCurvesBuilder builder To create a new instance of this class, use NXOpen::GeometricUtilities::OmnicadManager::CreateFtmFixedCurvesBuilder Default values |
| FtmFixedCurvesBuilderList | Represents a list of objects |
| FtmTransformCurvesBuilder | Represents a NXOpen::GeometricUtilities::FtmTransformCurvesBuilder builder To create a new instance of this class, use NXOpen::GeometricUtilities::OmnicadManager::CreateFtmTransformCurvesBuilder Default values |
| FtmTransformCurvesBuilderList | Represents a list of objects |
| FtmTransformPointsBuilder | Represents a NXOpen::GeometricUtilities::FtmTransformPointsBuilder builder To create a new instance of this class, use NXOpen::GeometricUtilities::OmnicadManager::CreateFtmTransformPointsBuilder Created in NX10.0.0 |
| FtmTransformPointsBuilderList | Represents a list of objects |
| GeneralPattern | General pattern definition |
| GeometryLocationData | Represents a NXOpen::GeometricUtilities::GeometryLocationData To create a new instance of this class, use NXOpen::GeometricUtilities::GeometryLocationDataCollection::CreateGeometryLocationData Created in NX5.0.0 |
| GeometryLocationDataCollection | This class contains the factory methods for creating GeometryLocationData |
| iterator | Iterator for accessing the contents of the collection |
| HelixPattern | Helix pattern definition |
| HorizontalReference | Horizontal reference vector definition |
| IComponentBuilder | Represents a component contained in a builder |
| InstanceEditedExpressionItem | Edited value of one master expression of the input object(s) being patterned |
| InstanceEditedExpressionItemList | Represents a list of objects |
| InstanceEditedExpressionsList | List of NXOpen::GeometricUtilities::InstanceEditedExpressionItem objects |
| InteractiveSectionBuilder | Represents a NXOpen::GeometricUtilities::InteractiveSectionBuilder |
| LawBuilder | Represents a LawBuilder Created in NX5.0.0 |
| Limits | Represents a limits data |
| LinearLimits | Represents a limits data |
| LocalUntrimBuilder | Represents a NXOpen::GeometricUtilities::LocalUntrimBuilder builder |
| LocalUntrimManager | Provides create builder methods for LocalUntrimBuilder To obtain an instance of this class, refer to NXOpen::Part Created in NX9.0.0 |
| MatchSurfaceBuilder | Represents a NXOpen::GeometricUtilities::MatchSurfaceBuilder builder.This builder's Commit can create a b-surface To create a new instance of this class, use NXOpen::GeometricUtilities::CAMDataPrepManager::CreateMatchSurfaceBuilder Default values |
| MiddleHoleData | Represents a NXOpen::GeometricUtilities::MiddleHoleData Created in NX5.0.2 |
| MirrorPattern | Mirror pattern definition |
| ModlAlongCurveAngle | This class NXOpen::GeometricUtilities::ModlAlongCurveAngle represents motion type in ModlMotion Created in NX8.5.0 |
| ModlDistanceAngle | Represents a NXOpen::GeometricUtilities::ModlDistanceAngle |
| ModlMotion | Represents a NXOpen::GeometricUtilities::ModlMotion |
| MovePoleBuilder | This class manages the control poles movements for a surface or curve |
| MultiDraft | Represents a multi-draft |
| MultiTransitionLawBuilder | Represents multiple transition law |
| NestModuleBuilder | Represents a NXOpen::GeometricUtilities::NestModuleBuilder Note that this class is now deprecated |
| NonInflectingLawBuilder | Represents a non-inflecting law |
| OmnicadManager | Represents a manager for creating builder objects for OmniCAD Free Transformer To obtain an instance of this class, refer to NXOpen::Part Created in NX10.0.0 |
| OnPathDimensionBuilder | Builds an on-path dimension Created in NX5.0.0 |
| OnPathDimWithValueBuilder | Represents a NXOpen::GeometricUtilities::OnPathDimWithValueBuilder |
| OnPathDistancePatternSpacing | Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
| OrientationMethodBuilder | Represents a NXOpen::GeometricUtilities::OrientationMethodBuilder |
| OrientXpressBuilder | Represent the OrientXpress block OrientXpress is not supported in KF |
| ParentEquivalencyMap | Represents a NXOpen::GeometricUtilities::ParentEquivalencyMap |
| ParentEquivalencyMapList | Represents a list of objects |
| PartModuleInputBuilder | Represents a NXOpen::GeometricUtilities::PartModuleInputBuilder To create a new instance of this class, use NXOpen::Features::PartModule::CreatePartModuleInputBuilder Default values |
| PartModuleOutputBuilder | Represents a NXOpen::GeometricUtilities::PartModuleOutputBuilder To create a new instance of this class, use NXOpen::Features::PartModule::CreatePartModuleOutputBuilder Created in NX8.0.0 |
| PartModuleOutputBuilder1 | Represents a NXOpen::GeometricUtilities::PartModuleOutputBuilder1 To create a new instance of this class, use NXOpen::Features::PartModule::CreatePartModuleOutputBuilder1 Default values |
| PartModuleReferencesBuilder | Represents a NXOpen::GeometricUtilities::PartModuleReferencesBuilder Created in NX8.0.0 |
| PartModuleRelationshipBuilder | Represents a Features::PartModule builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreatePartModuleRelationshipBuilder Created in NX8.0.0 |
| PathLimits | Represents a path limits data |
| PatternClocking | Enables the ability to apply delta transforms on individual instances of a pattern |
| PatternClockingBuilder | Enables the ability to apply delta transforms on individual instances of a pattern within the pattern feature To create a new instance of this class, use NXOpen::GeometricUtilities::PatternDefinition::CreateClockingBuilder Default values |
| PatternDefinition | Pattern spacing for several pattern based commands |
| PatternFill | Pattern fill definition |
| PatternIncrementItem | Variational for one master expression of the input object(s) being patterned |
| PatternIncrementItemList | Represents a list of objects |
| PatternIncrementsBuilder | Pattern increments builder Created in NX7.5.0 |
| PatternIncrementsList | List of NXOpen::GeometricUtilities::PatternIncrementItem objects |
| PatternInstanceEditBuilder | Pattern instance edit builder To create a new instance of this class, use NXOpen::GeometricUtilities::PatternDefinition::CreatePatternInstanceEditBuilder Created in NX7.5.0 |
| PatternOrientation | Pattern orientation definition |
| PatternReferencePointServiceBuilder | Pattern Reference Point is a service which enables the employing client to compute the reference point for pattern instance locations |
| PatternSpacing | Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
| PatternSpacingsList | List of NXOpen::GeometricUtilities::PatternSpacingsListItem objects |
| PatternSpacingsListItem | One pattern spacing in the spacings list To create a new instance of this class, use NXOpen::GeometricUtilities::PatternSpacingsList::CreatePatternSpacingsListItem Created in NX8.0.0 |
| PatternSpacingsListItemList | Represents a list of objects |
| PlayButtonsBuilder | VCR buttons for any dialog that needs them Created in NX11.0.0 |
| PointSetAlignmentBuilder | This class performs a point set to point set alignment To create a new instance of this class, use NXOpen::Part::CreatePointSetAlignmentBuilder Default values |
| PointsFromFileBuilder | Represents a NXOpen::GeometricUtilities::PointsFromFileBuilder builder read points from a text file with format *.asc, *.txt, *.dat, *.pts To create a new instance of this class, use NXOpen::Part::CreatePointsFromFileBuilder Created in NX8.5.0 |
| PolygonPattern | Polygon pattern definition |
| PolygonPatternSpacing | Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
| ProjectionOptions | Represents a ProjectionOptions Created in NX4.0.0 |
| QuadrilateralFrameBuilder | Represents a NXOpen::GeometricUtilities::QuadrilateralFrameBuilder Created in NX6.0.0 |
| Rebuild | Represents a NXOpen::GeometricUtilities::Rebuild |
| RectangularFrameBuilder | Rectangular frame builder Created in NX7.5.1 |
| RectangularPattern | Rectangular pattern definition |
| ReduceSurfaceRadiusBuilder | Reduce Surface Radius Builder of Geometric Utilities |
| ReduceSurfaceRadiusFaceGroupBuilder | Reduce Surface Radius Face Group Builder of Geometric Utilities |
| ReduceSurfaceRadiusFaceGroupBuilderList | Represents a list of objects |
| ReferencePattern | Reference pattern definition |
| RefitControlBuilder | This class is used to specify the parameter set to refit faces Created in NX6.0.0 |
| RegionTracker | Class which collects all the geometric entities used to identify a region of faces during a boolean feature |
| RenameLinkedPartModulePartBuilder | Represents a Features::PartModule builder To create a new instance of this class, use NXOpen::Features::FeatureCollection::CreateRenameLinkedPartModulePartBuilder Created in NX9.0.0 |
| RenewFeatureBuilder | Represents a RenewFeatureBuilder object |
| ReplAsstBuilder | Represents a NXOpen::GeometricUtilities::ReplAsstBuilder |
| RodItemBuilder | Represents a RodItem To create a new instance of this class, use NXOpen::GeometricUtilities::RodItemListBuilder::CreateRodItemBuilder Created in NX1847.0.0 |
| RodItemBuilderList | Represents a list of objects |
| RodItemListBuilder | Represents a RodItemList Created in NX1847.0.0 |
| RotationSetBuilder | Represents a NXOpen::GeometricUtilities::RotationSetBuilder |
| RotationSetBuilderList | Represents a list of objects |
| SaveConstraintsBuilder | Represents a builder for a Save Constraints |
| ScalingMethodBuilder | Represents a NXOpen::GeometricUtilities::ScalingMethodBuilder |
| ScalingSetBuilder | Represents a NXOpen::GeometricUtilities::ScalingSetBuilder |
| ScalingSetBuilderList | Represents a list of objects |
| SecondarySectionData | Represents a NXOpen::GeometricUtilities::SecondarySectionData |
| SectionPlaneData | Represents a Section Plane Data class This class acts like a container to hold the data needed to create a plane |
| SelectDividingObjectBuilder | Represents the dividing tool block for dividing face Created in NX9.0.0 |
| SelectionList | Represents a NXOpen::GeometricUtilities::SelectionList To create a new instance of this class, use NXOpen::Part::CreateSelectionList Created in NX8.0.0 |
| SelectionListList | Represents a list of objects |
| ShapeFrameBuilder | Represents a NXOpen::GeometricUtilities::ShapeFrameBuilder Created in NX6.0.0 |
| SimpleDraft | Represents an Offset |
| SmartVolumeProfileBuilder | This class contains the options for automatically closing the profile to surrounding model geometry |
| SnipIntoPatchesBuilder | Represents a NXOpen::GeometricUtilities::SnipIntoPatchesBuilder builder |
| SpineDefinitionBuilder | Provides a spine definition for modeling operations Created in NX8.5.0 |
| SpinePlaneBuilder | Represents a NXOpen::GeometricUtilities::SpinePlaneBuilder |
| SpinePlaneBuilderList | Represents a list of objects |
| SpinePointData | Represents a spine point def object To create an instance of this class, see NXOpen::GeometricUtilities::SpinePointDataCollection Created in NX5.0.0 |
| SpinePointDataCollection | This class contains the factory methods for creating a SpinePointData object |
| iterator | Iterator for accessing the contents of the collection |
| SpiralPattern | Spiral pattern definition |
| SplineExtensionBuilder | Spline extension builder class |
| SShapedLawBuilder | Represents a s-shaped law |
| StartHoleData | Represents a NXOpen::GeometricUtilities::StartHoleData Created in NX5.0.2 |
| StepOptionBehavior | Represents a NXOpen::GeometricUtilities::StepOptionBehavior It provides several step options for controlling behavior when move face and so on |
| StyledSweepDoubleOnPathDimBuilder | Represents a NXOpen::GeometricUtilities::StyledSweepDoubleOnPathDimBuilder |
| StyledSweepDoubleOnPathDimBuilderList | Represents a list of objects |
| StyledSweepReferenceMethodBuilder | Represents a NXOpen::GeometricUtilities::StyledSweepReferenceMethodBuilder |
| SupportPlaneData | Represents a NXOpen::GeometricUtilities::SupportPlaneData Created in NX5.0.0 |
| SurfaceRangeBuilder | Represents the surface range and anchor builder Created in NX6.0.0 |
| TangentMagnitudeBuilder | This class provides ability to specify the start and end tangent magnitude values |
| TransformerData | Transformation and orientation tool |
| TransitionCurveBuilder | This class provides ability to create a transition(bridge) curve between two adjacent setback curves |
| TransitionCurveBuilderList | Represents a list of objects |
| TransitionLawNodeBuilder | Represents a law node with transition type |
| TransitionLawNodeBuilderList | Represents a list of objects |
| TriangularFrameBuilder | Represents a NXOpen::GeometricUtilities::TriangularFrameBuilder |
| TrimCurveBoundingObjectBuilder | Represents a NXOpen::GeometricUtilities::TrimCurveBoundingObjectBuilder To create a new instance of this class, use NXOpen::Features::TrimCurve2Builder::CreateTrimCurveBoundingObjectBuilder Created in NX11.0.1 |
| TrimCurveBoundingObjectBuilderList | Represents a list of objects |
| TwoExpressionsCollectorSet | Represents a two dimension list item builder To create a new instance of this class, use NXOpen::Part::CreateEmptyTwoExpressionsCollectorSet Created in NX8.5.0 |
| TwoExpressionsCollectorSetList | Represents a list of objects |
| TwoExpressionsSectionSet | Represents a two dimension list section item builder To create a new instance of this class, use NXOpen::Part::CreateEmptyTwoExpressionsSectionSet Created in NX9.0.0 |
| TwoExpressionsSectionSetList | Represents a list of objects |
| UnitCellBuilder | Represents a GeometricUtilities.UnitCellBuilder Created in NX1847.0.0 |
| UnnestModuleBuilder | Represents a NXOpen::GeometricUtilities::UnnestModuleBuilder Note that this class is now deprecated |
| WaveLinkRepository | Represents a NXOpen::GeometricUtilities::WaveLinkRepository |
| Issue | Provides classes and interfaces for Issue Management |
| IssueAttachment | Represents the Issue Attachment object |
| IssueBriefcase | Represents the Issue Briefcase object |
| IssueBriefcaseSynchronizeBuilder | Represents a NXOpen::Issue::IssueBriefcase synchronize builder To create a new instance of this class, use NXOpen::Issue::IssueBriefcase::CreateSynchronizeContentBuilder Created in NX10.0.0 |
| IssueContent | Represents the Issue Issue object |
| IssueContentBuilder | Represents a NXOpen::Issue::IssueContent builder To create a new instance of this class, use NXOpen::Issue::IssueManager::CreateIssueContentBuilder Default values |
| IssueFolder | Represents the Issue Folder object |
| IssueList | Represents the Issue List object |
| IssueListCollection | Represents a NXOpen::Issue::IssueListCollection To obtain an instance of this class, refer to NXOpen::Issue::IssueManager Created in NX8.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| IssueManager | Contains the collection objects for creating and iterating over issue objects |
| IssueProperty | Represents the Issue Property object |
| IssueSite | Represents the Issue Site object |
| SnapshotSubsetBuilder | Used to create or edit issue snapshot subset |
| SnapshotWorksetBuilder | Used to create or edit issue snapshot workset which is a container to hold all the corresponding parts to represent an issue |
| Layer | Provides classes and interfaces for layer |
| Category | Represents a layer category |
| CategoryCollection | Represents a collection of layer categories To obtain an instance of this class, refer to NXOpen::BasePart Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LayerManager | Represents an object that manages layers To obtain an instance of this class, refer to NXOpen::BasePart Created in NX3.0.0 |
| StateCollection | Represents a copy of the layer states |
| StateInfo | Used in several methods that get or set the state of a layer |
| Layout2d | Provides classes and interfaces for Layout2D |
| AssemblyCreationSettingsBuilder | Represents a NXOpen::Layout2d::AssemblyCreationSettingsBuilder |
| AssemblyFromLayout2dBuilder | Represents a Builder for create assembly from Layout functionality which will create a new assembly from the selected Layout To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateAssemblyFromLayout2dBuilder Created in NX10.0.0 |
| AssemblyRelation | Represents Assembly::Relation object Instances of this class can be accessed through AssociativeAssemblyBuilder Created in NX1847.0.0 |
| AssociativeAssemblyBuilder | Represents a Builder for Layout associative assembly To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateAssociativeAssemblyBuilder Created in NX1847.0.0 |
| Component | Represents the Component object |
| ComponentCollection | Represents a collection of NXOpen::Layout2d::Component s |
| iterator | Iterator for accessing the contents of the collection |
| ComponentDefinition | Represents a component definition |
| ComponentDefinitionCollection | Represents a collection of NXOpen::Layout2d::ComponentDefinition objects |
| iterator | Iterator for accessing the contents of the collection |
| ComponentNameBuilder | This class is used to construct the component name and part file name block, if it is in manage mode, we also have item number, item revision and item name |
| ComponentSettingsBlockBuilder | Represents the Component Settings Button (Layout2d.ComponentSettingsBlockBuilder) |
| ComponentSettingsBuilder | Represents a NXOpen::Layout2d::ComponentSettingsBuilder This builder stores the information of the 2D Component settings |
| ConvertLayoutToSheetBuilder | Represents a Builder for converting Layout to drawing sheet To create a new instance of this class, use NXOpen::Layout2d::LayoutDrawingSheetCollection::CreateConvertLayoutToSheetBuilder Created in NX12.0.0 |
| ConvertSheetToLayoutBuilder | Represents a Builder for converting a drawing sheet to Layout To create a new instance of this class, use NXOpen::Layout2d::LayoutDrawingSheetCollection::CreateConvertSheetToLayoutBuilder Created in NX12.0.0 |
| CreateComponentFrom3DBuilder | Represents a Builder that creates NXOpen::Layout2d::Component from Assembly To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateComponentFrom3dBuilder Default values |
| CreateComponentFrom3DSettingsBuilder | Represents a NXOpen::Layout2d::CreateComponentFrom3DSettingsBuilder |
| DefineComponentAnchorPointBuilder | Represents a Builder for Define Component Anchor Point functionality which will define the anchor point location of a 2D Component instance To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateDefineComponentAnchorPointBuilder Created in NX10.0.0 |
| DefineComponentBuilder | Represents a Builder for Define 2D component functionality which will define a 2D Component and stores its definition in the Reuse Library To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateDefineComponentBuilder Default values |
| EditComponentSettingsBuilder | Represents a NXOpen::Layout2d::EditComponentSettingsBuilder builder |
| ExportComponentHierarchyBuilder | Represents a Builder for export component 2D hierarchy To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateExportComponentHierarchyBuilder Created in NX11.0.0 |
| GeneralPreferencesBuilder | Represents a NXOpen::Layout2d::GeneralPreferencesBuilder This builder stores the general layout preferences |
| InsertComponentBuilder | Represents a Builder for Insert Component functionality which will insert a 2D Component instance in the active sketch To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateInsertComponentBuilder Created in NX10.0.0 |
| LayoutDrawingSheet | Represents a Layout drawing sheet |
| LayoutDrawingSheetBuilder | Represents a Builder for creating Layout2d::LayoutDrawingSheet s To create a new instance of this class, use NXOpen::Layout2d::LayoutDrawingSheetCollection::CreateLayoutDrawingSheetBuilder Created in NX12.0.0 |
| LayoutDrawingSheetCollection | Represents a collection of NXOpen::Layout2d::LayoutDrawingSheet s |
| iterator | Iterator for accessing the contents of the collection |
| LocalDefinitionFolder | Represents a local definition folder |
| LocalDefinitionFolderBuilder | Represents a NXOpen::Layout2d::LocalDefinitionFolderBuilder |
| LocalDefinitionFolderCollection | Represents a collection of NXOpen::Layout2d::LocalDefinitionFolder objects |
| iterator | Iterator for accessing the contents of the collection |
| MakeComponentUniqueBuilder | Represents a Builder for Make 2D Component unique functionality which will create a new definition of the selected 2D Component instance To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateMakeComponentUniqueBuilder Default values |
| NewComponentBuilder | Represents a Builder for New 2D Component functionality which will create an empty 2D Component instance and stores its definition in the local 2D Component folder To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateNewComponentBuilder Created in NX10.0.0 |
| PublishComponentBuilder | Represents a Builder for Publish 2D Component functionality which will allow local definitions to be exported into external storage locations To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreatePublishComponentBuilder Created in NX10.0.0 |
| ReparentComponentBuilder | Represents a Builder for Reparent 2D Component functionality which will reparents the selected 2D Component contents from another 2D Component definition |
| ReplaceComponentBuilder | Represents a Builder for Replace 2D Component functionality which will replaces the selected 2D Component contents from another 2D Component definition |
| SelectComponent | Represents a single object selection |
| SelectComponentList | Represents a list of objects on a selection list |
| SmashComponentBuilder | Represents a Builder for Smash 2D Component functionality which will break instances of 2D Components into its constituent pieces, we can have multiple committed objects To create a new instance of this class, use NXOpen::Layout2d::ComponentCollection::CreateSmashComponentBuilder Created in NX10.0.0 |
| LineDesigner | Provides classes and interfaces for Line Designer |
| AlignComponentsBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateAlignComponentsBuilder Default values |
| ColumnFeature | Represents a column feature feature To create or edit an instance of this class, use NXOpen::LineDesigner::ColumnFeatureBuilder Created in NX9.0.0 |
| ColumnFeatureBuilder | Represents a LineDesigner::ColumnFeature Features.FeatureBuilder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateColumnFeatureBuilder Default values |
| ColumnGridEquipmentBuilder | Represents a LineDesigner.ColumnGridEquipment builder |
| ConnectionCreatorBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateConnectionCreatorBuilder Default values |
| ConveyorStationFeature | Represents a conveyor station feature feature To create or edit an instance of this class, use NXOpen::LineDesigner::ConveyorStationFeatureBuilder Created in NX9.0.0 |
| ConveyorStationFeatureBuilder | Represents a LineDesigner::ConveyorStationFeature builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateConveyorStationFeatureBuilder Default values |
| CoverFeature | Represents a cover feature To create or edit an instance of this class, use NXOpen::LineDesigner::CoverFeatureBuilder Created in NX9.0.0 |
| CoverFeatureBuilder | Represents a LineDesigner::CoverFeature builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateCoverFeatureBuilder Default values |
| CreateFactoryElement | Represents a create factory element To create or edit an instance of this class, use NXOpen::LineDesigner::CreateFactoryElementBuilder Created in NX9.0.0 |
| CreateFactoryElementBuilder | Represents a LineDesigner::CreateFactoryElement builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateCreateFactoryElementBuilder Default values |
| CreateFence | Represents a create fence To create or edit an instance of this class, use NXOpen::LineDesigner::CreateFenceBuilder Created in NX9.0.0 |
| CreateFenceBuilder | Represents a LineDesigner::CreateFence builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateCreateFenceBuilder Created in NX9.0.0 |
| CreateSystem | Represents a create system To create or edit an instance of this class, use NXOpen::LineDesigner::CreateSystemBuilder Created in NX9.0.0 |
| CreateSystemBuilder | Represents a LineDesigner::CreateSystem builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateCreateSystemBuilder Created in NX9.0.0 |
| DBColumnGridNode | Represents DB column grid node To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBColumnGridNode Created in NX9.0.0 |
| DBConveyorNode | Represents DB conveyor node To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBConveyorNode Created in NX9.0.0 |
| DBFactoryCadGeoNode | Represents DB import factory cad geo node To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBFactoryCadGeoNode Created in NX11.0.0 |
| DBFactoryNode | Represents DB factory node To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBFactoryNode Created in NX9.0.0 |
| DBFenceNode | Represents DB factory node To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBFenceNode Created in NX9.0.0 |
| DBFloorEquipmentNode | Represents DB Floor equipment node To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBFloorEquipmentNode Created in NX9.0.0 |
| DBNode | Represents DB node This is an abstract class, and cannot be instantiated |
| DBNodeContainer | Represents DB node container To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBNodeContainer Created in NX9.0.0 |
| DBNodeManager | Represents a manager of line designer db nodes Use the static method in this class to obtain an instance |
| DBNodeUtils | Represents a utils of line designer for journaling uinode methods Use the static method in this class to obtain an instance |
| DBPlatformEquipmentNode | Represents DB platform equipment node To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBPlatformEquipmentNode Created in NX9.0.0 |
| DBSmartComplexEquipmentNode | Represents DB factory node Created in NX9.0.0 |
| DBSmartEquipmentNode | Represents DB factory node Created in NX9.0.0 |
| DBStairwayEquipmentNode | Represents DB stairway equipment node To create a new instance of this class, use NXOpen::LineDesigner::DBNodeManager::CreateDBStairwayEquipmentNode Created in NX9.0.0 |
| DefineRobotBuilder | Define Robot To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateDefineRobotBuilder Default values |
| DefineToolBuilder | Define Tool To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateDefineToolBuilder Created in NX12.0.1 |
| DiamondConnectorFeature | Represents a typed connector feature feature To create or edit an instance of this class, use NXOpen::LineDesigner::TypedConnectorFeatureBuilder Created in NX9.0.0 |
| DisconnectConnectionBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateDisconnectConnectionBuilder Created in NX10.0.0 |
| DistributeComponentsBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateDistributeComponentsBuilder Created in NX12.0.1 |
| ExportPlantToDWG | Represents the export plant to dwg To create or edit an instance of this class, use NXOpen::LineDesigner::ExportPlantToDWGBuilder Created in NX9.0.0 |
| ExportPlantToDWGBuilder | Represents a LineDesigner::ExportPlantToDWG builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateExportPlantToDwgBuilder Default values |
| ExportToDWG | Represents an export to dwg To create or edit an instance of this class, use NXOpen::LineDesigner::ExportToDWGBuilder Created in NX9.0.0 |
| ExportToDWGBuilder | Represents a LineDesigner::ExportToDWG builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateExportToDwgBuilder Default values |
| FactoryCadGeoEquipmentAssemblyBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateFactorycadgeoequipmentassemblyBuilder Created in NX11.0.1 |
| UpdatedControlData | Contains feature update status report |
| FactoryCadGeoEquipmentBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateFactorycadgeoequipmentBuilder Created in NX11.0.0 |
| UpdatedControlData | Contains feature update status report |
| FastPlacementUtilityBuilder | Fast Placement Established by LineDesigner_LineDesignerManager whenever it is needed |
| FloorEquipmentBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateFloorequipmentBuilder Default values |
| GateFeature | Represents a gate feature To create or edit an instance of this class, use NXOpen::LineDesigner::GateFeatureBuilder Created in NX9.0.0 |
| GateFeatureBuilder | Represents a LineDesigner::GateFeature builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateGateFeatureBuilder Default values |
| GlobalSelectionBuilder | Global Selection To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateGlobalSelectionBuilder Created in NX9.0.0 |
| HeadConnectorFeature | Represents a typed connector feature feature To create or edit an instance of this class, use NXOpen::LineDesigner::TypedConnectorFeatureBuilder Created in NX9.0.0 |
| HoleFeature | Represents a hole feature feature To create or edit an instance of this class, use NXOpen::LineDesigner::HoleFeatureBuilder Created in NX9.0.0 |
| HoleFeatureBuilder | Represents a LineDesigner::HoleFeature builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateHoleFeatureBuilder Default values |
| ImportFactoryCadGeoBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateImportFactoryCadGeoBuilder Created in NX10.0.0 |
| InsertSheet | Represents an insert sheet To create or edit an instance of this class, use NXOpen::LineDesigner::InsertSheetBuilder Created in NX9.0.0 |
| InsertSheetBuilder | Represents a LineDesigner::InsertSheet builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateInsertSheetBuilder Default values |
| JigOnPlaneBuilder | Jig on plane To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateJigOnPlaneBuilder Created in NX9.0.0 |
| LineDesignerApplicationBuilder | Represents a class to create enter and exit the LineDesigner application |
| LineDesignerManager | Represents a manager of line designer builders Use the static method in this class to obtain an instance |
| LineDesignerUserCallBackManager | Represents a manager of line designer user callbacks Use the static method in this class to obtain an instance |
| ModelBaseObject | Represents Model Base Object This is an abstract class, and cannot be instantiated |
| ModelPlantManager | Represents a manager of line designer model Use the static method in this class to obtain an instance |
| ModelPlantRoot | Represents a manager of line designer plant model Established by LineDesigner_ModelPlantManager when we enter the application Created in NX9.0.0 |
| ModelProductionUnit | Represents Production Unit Created in NX9.0.0 |
| ModelResourceInstance | Represents Resource Instance Created in NX9.0.0 |
| MountBuilder | MountBuilder Class: Used when mounting a tool on robot |
| PickRectanglePointsBuilder | Pick Rectangle Points To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreatePickRectanglePointsBuilder Created in NX9.0.0 |
| PlantProductionUnitCreatorBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::PlantCreateProductionUnitCreatorBuilder Created in NX12.0.0 |
| PlanViewManager | Represents a singleton JA for PlanViewManager To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreatePlanViewManagerInstance Created in NX9.0.0 |
| PlatformEquipmentBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreatePlatformEquipmentBuilder Default values |
| ProductionUnitCreatorBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateProductionUnitCreatorBuilder Created in NX10.0.0 |
| RailingFeature | Represents a rail feature To create or edit an instance of this class, use NXOpen::LineDesigner::RailingFeatureBuilder Created in NX9.0.0 |
| RailingFeatureBuilder | Represents a LineDesigner::RailingFeature Features.FeatureBuilder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateRailingFeatureBuilder Default values |
| RailOpeningFeature | Represents a rail Opening feature To create or edit an instance of this class, use NXOpen::LineDesigner::RailOpeningFeatureBuilder Created in NX9.0.0 |
| RailOpeningFeatureBuilder | Represents a LineDesigner::RailOpeningFeature builder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateRailOpeningFeatureBuilder Default values |
| RenameDialogeBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateRenameDialogeBuilder Default values |
| RenameItemRevisionBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateRenameItemRevisionBuilder Created in NX10.0.3 |
| ResizeConnectorBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateResizeConnectorBuilder Default values |
| ReuseLibraryDragData | Represents a manager of line designer plant model Established by LineDesigner_ReuseLibraryUtilityBuilder whenever it is needed |
| ReuseLibraryUtilityBuilder | Represents a JA for ReuseLibraryUtility Established by LineDesigner_LineDesignerManager whenever it is needed |
| SingleElementConveyorBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateSingleElementConveyorBuilder Created in NX9.0.0 |
| StairwayEquipmentBuilder | To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateStairwayEquipmentBuilder Default values |
| TailConnectorFeature | Represents a typed connector feature feature To create or edit an instance of this class, use NXOpen::LineDesigner::TypedConnectorFeatureBuilder Created in NX9.0.0 |
| TypedConnectorFeature | Represents a typed connector feature feature To create or edit an instance of this class, use NXOpen::LineDesigner::TypedConnectorFeatureBuilder Created in NX9.0.0 |
| TypedConnectorFeatureBuilder | Represents a LineDesigner::TypedConnectorFeature Features.FeatureBuilder To create a new instance of this class, use NXOpen::LineDesigner::LineDesignerManager::CreateTypedConnectorFeatureBuilder Default values |
| UINodeUtils | Represents a utils of line designer for journaling uinode methods Use the static method in this class to obtain an instance |
| UnmountBuilder | UnmountBuilder Class: Used when unmounting a tool from robot |
| Markup | Provides classes and interfaces for Markup |
| MechanicalRouting | Provides classes and interfaces for Mechanical Routing |
| AssignCornerBuilder | Builder class for Assign Corner which creates corner To create a new instance of this class, use NXOpen::MechanicalRouting::BuilderFactory::CreateAssignCornerBuilder Default values |
| BaseCornerTypeBuilder | Builder class for Base Corner Types Created in NX11.0.0 |
| BendCornerTypeBuilder | Contains setting for corner creation |
| BuilderFactory | Represents an NXOpen::MechanicalRouting::BuilderFactory object |
| BulkReplacementBuilder | Builder class for Bulk Replacement which manages replacement operations on design elements To create a new instance of this class, use NXOpen::MechanicalRouting::BuilderFactory::CreateBulkReplacementBuilder Created in NX12.0.0 |
| ConnectBuilder | Builder for Connect Path To create a new instance of this class, use NXOpen::MechanicalRouting::BuilderFactory::CreateConnectBuilder Created in NX11.0.0 |
| ConnectivityService | Represents a NXOpen::MechanicalRouting::ConnectivityService object |
| CornerBuilder | Builder class for Corner Block Created in NX11.0.1 |
| CreatePathBuilder | Represents NXOpen::MechanicalRouting::CreatePathBuilder |
| DynamicCutElbowBehaviorBuilder | Represents NXOpen::MechanicalRouting::DynamicCutElbowBehaviorBuilder |
| EditPlacementBuilder | Builder to Edit Placement To create a new instance of this class, use NXOpen::MechanicalRouting::BuilderFactory::CreateEditPlacementBuilder Created in NX12.0.0 |
| EditPointBuilder | Represents NXOpen::MechanicalRouting::EditPointBuilder |
| LogicalDesignService | Represents a NXOpen::MechanicalRouting::LogicalDesignService object |
| ManageInlineBehaviorBuilder | Represents NXOpen::MechanicalRouting::ManageInlineBehaviorBuilder |
| MergeBuilder | Builder to Merge Component To create a new instance of this class, use NXOpen::MechanicalRouting::BuilderFactory::CreateMergeBuilder Created in NX11.0.1 |
| MovePathBuilder | Represents NXOpen::MechanicalRouting::MovePathBuilder |
| PartPlacementBuilder | Represents NXOpen::MechanicalRouting::PartPlacementBuilder |
| PathTransitionBuilder | Represents NXOpen::MechanicalRouting::PathTransitionBuilder |
| PathTransitionBuilderList | Represents a list of objects |
| PathTransitionListManagerBuilder | Represents NXOpen::MechanicalRouting::PathTransitionListManagerBuilder |
| PipingComponentFileBuilder | Builder for PipingComponentFile data To create a new instance of this class, use NXOpen::MechanicalRouting::BuilderFactory::CreatePipingComponentFileBuilder Created in NX12.0.0 |
| RefreshRunsFromTeamcenterBuilder | Builder which manages refreshing the runs from Teamcenter To create a new instance of this class, use NXOpen::MechanicalRouting::BuilderFactory::CreateRefreshRunsFromTeamcenterBuilder Created in NX1847.0.0 |
| RoutingManager | Represents an NXOpen::MechanicalRouting::RoutingManager object |
| SplitBuilder | Builder to Assign Discontinuity for the stocks To create a new instance of this class, use NXOpen::MechanicalRouting::BuilderFactory::CreateSplitBuilder Created in NX11.0.0 |
| StockBuilder | Builder for creating/editing stocks |
| TransformBlockBuilder | Represents NXOpen::MechanicalRouting::TransformBlockBuilder |
| Mechatronics | Provides classes and interfaces for Mechatronics |
| Accelerometer | Represents the Accelerometer |
| AccelerometerBuilder | Represents a NXOpen::Mechatronics::Accelerometer builder |
| AccelerometerCollection | Represents a collection of Accelerometer |
| iterator | Iterator for accessing the contents of the collection |
| AdapterFormula | Represents the Adapter Formula class |
| AdapterFormulaBuilder | Represents a NXOpen::Mechatronics::AdapterFormulaBuilder |
| AdapterFormulaCollection | Represents a collection of Adapter Formula |
| iterator | Iterator for accessing the contents of the collection |
| AdapterSignal | Represents the Adapter Signal class |
| AdapterSignalBuilder | Represents a NXOpen::Mechatronics::AdapterSignalBuilder |
| AdapterSignalCollection | Represents a collection of Adapter Signal |
| iterator | Iterator for accessing the contents of the collection |
| AddComponentBuilder | Represents a NXOpen::Mechatronics::AddComponentBuilder To create a new instance of this class, use NXOpen::Mechatronics::FunctionObjectCollection::CreateAddComponentBuilder Created in NX7.5.1 |
| AlignBody | Represents the Align Body |
| AlignBodyBuilder | Represents a NXOpen::Mechatronics::AlignBody builder |
| AlignBodyCollection | Represents a collection of Align Body |
| iterator | Iterator for accessing the contents of the collection |
| AngularLimitJoint | Represents the Angular Limit Joint |
| AngularLimitJointBuilder | Represents a NXOpen::Mechatronics::AngularLimitJoint builder |
| AngularLimitJointCollection | Represents a collection of Angular Limit Joint |
| iterator | Iterator for accessing the contents of the collection |
| AngularSpringJoint | Represents the Angular Spring Joint |
| AngularSpringJointBuilder | Represents a NXOpen::Mechatronics::AngularSpringJoint builder |
| AngularSpringJointCollection | Represents a collection of Angular Spring Joint |
| iterator | Iterator for accessing the contents of the collection |
| AnimationConversionBuilder | Represents a Mechatronics::AnimationConversionBuilder builder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateAnimationConversionBuilder Created in NX12.0.0 |
| BallJoint | Represents the Ball Joint |
| BallJointBuilder | Represents a NXOpen::Mechatronics::BallJoint builder |
| BallJointCollection | Represents a collection of Ball Joint |
| iterator | Iterator for accessing the contents of the collection |
| BreakingConstraint | Represents the Breaking Constraint |
| BreakingConstraintBuilder | Represents a NXOpen::Mechatronics::BreakingConstraint builder |
| BreakingConstraintCollection | Represents a collection of Breaking Constraint |
| iterator | Iterator for accessing the contents of the collection |
| Cam | Represents the Cam Constraint |
| CamBuilder | Represents a NXOpen::Mechatronics::Cam builder |
| CamCollection | Represents a collection of Cam |
| iterator | Iterator for accessing the contents of the collection |
| CamProfile | Represents the CamProfile class |
| CamProfileBuilder | Represents a NXOpen::Mechatronics::CamProfile builder |
| Element | Contains segment information of a motion segment |
| CamProfileCollection | Represents a collection of Cam Profile |
| iterator | Iterator for accessing the contents of the collection |
| CamProfileDocumentationBuilder | Represents a NXOpen::Mechatronics::CamProfileDocumentationBuilder |
| ChainJointBuilder | Represents a NXOpen::Mechatronics::ChainJointBuilder |
| ChangeMaterial | Represents the Change material constraint |
| ChangeMaterialBuilder | Represents a NXOpen::Mechatronics::ChangeMaterial builder |
| ChangeMaterialCollection | Represents a collection of Change Material Constraint |
| iterator | Iterator for accessing the contents of the collection |
| ChangeOwnerBuilder | Represents a NXOpen::Mechatronics::ChangeOwnerBuilder |
| CollisionBody | Represents the Collision Body class |
| CollisionBodyBuilder | Represents a NXOpen::Mechatronics::CollisionBodyBuilder |
| CollisionBodyCollection | Represents a collection of Collision Bodies |
| iterator | Iterator for accessing the contents of the collection |
| CollisionMaterial | Represents the Collision Material class |
| CollisionMaterialBuilder | Represents a NXOpen::Mechatronics::CollisionMaterial builder |
| CollisionMaterialCollection | Represents a collection of Collision Material |
| iterator | Iterator for accessing the contents of the collection |
| CollisionSensor | Represents the Collision Sensor |
| CollisionSensorBuilder | Represents a NXOpen::Mechatronics::CollisionSensor builder |
| CollisionSensorCollection | Represents a collection of Collision Sensor |
| iterator | Iterator for accessing the contents of the collection |
| CollisionShapeBuilder | This is an abstract class, and cannot be created |
| ComparisonResult | Represents comparison result Created in NX9.0.0 |
| ComparisonResultAttribute | Represents attribute of comparison result Created in NX9.0.0 |
| ComparisonResultBase | Represents base object of comparison result Created in NX9.0.0 |
| ComparisonResultContext | Represents context of comparison results Created in NX9.0.0 |
| ComparisonResultElectricalPart | Represents electrical part of comparison result Created in NX9.0.0 |
| ConstraintConversionBuilder | Represents a Mechatronics::ConstraintConversionBuilder builder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateConstraintConversionBuilder Created in NX1847.0.0 |
| ConvertFromMTBBuilder | Represents a NXOpen::Mechatronics::ConvertFromMTBBuilder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateConvertFromMtbbuilder Created in NX9.0.0 |
| Coupling | Represents the mechatronics coupling class |
| CouplingBuilder | This is an abstract class, and cannot be created |
| CurveOnCurveJoint | Represents the CurveOnCurve Joint |
| CurveOnCurveJointBuilder | Represents a NXOpen::Mechatronics::CurveOnCurveJoint builder To create a new instance of this class, use NXOpen::Mechatronics::CurveOnCurveJointCollection::CreateCurveOnCurveJointBuilder Default values |
| CurveOnCurveJointCollection | Represents a collection of CurveOnCurve Joint |
| iterator | Iterator for accessing the contents of the collection |
| CylindricalJoint | Represents the Cylindrical Joint |
| CylindricalJointBuilder | Represents a NXOpen::Mechatronics::CylindricalJoint builder |
| CylindricalJointCollection | Represents a collection of Cylindrical Joint |
| iterator | Iterator for accessing the contents of the collection |
| DependencyCreatorBuilder | Represents a NXOpen::Mechatronics::DependencyCreatorBuilder builder |
| DisplayChanger | Represents the Display Changer which is used to change the display properties (Color, Translucency, and Visibility) of rigid body during simulation |
| DisplayChangerBuilder | Represents a NXOpen::Mechatronics::DisplayChanger builder |
| DisplayChangerCollection | Represents a collection of Object Transformer |
| iterator | Iterator for accessing the contents of the collection |
| DistanceSensor | Represents the Distance Sensor |
| DistanceSensorBuilder | Represents a NXOpen::Mechatronics::DistanceSensor builder |
| DistanceSensorCollection | Represents a collection of Distance Sensor |
| iterator | Iterator for accessing the contents of the collection |
| DynamicObjectTable | Represents the DynamicObjectTable class |
| DynamicObjectTableBuilder | Represents a NXOpen::Mechatronics::DynamicObjectTableBuilder builder |
| Instance | Represents Instance definition structure |
| DynamicObjectTableCollection | Represents a collection of DynamicObjectTable |
| iterator | Iterator for accessing the contents of the collection |
| ECADExportBuilder | Represents a NXOpen::Mechatronics::ECADExportBuilder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateECADExportBuilder Created in NX8.5.0 |
| ECADImportBuilder | Represents a NXOpen::Mechatronics::ECADImportBuilder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateECADImportBuilder Created in NX8.5.0 |
| ElectricalPart | Electrical Part holds the part attributes for communicating with EPLAN |
| ElectricalPartBuilder | Represents a NXOpen::Mechatronics::ElectricalPart builder To create a new instance of this class, use NXOpen::Mechatronics::ElectricalPartCollection::CreateElectricalPartBuilder Created in NX9.0.0 |
| Attribute | Defined Attribute Structure |
| ElectricalPartCollection | Represents a NXOpen::Mechatronics::ElectricalPartCollection To obtain an instance of this class, refer to NXOpen::Mechatronics::MechatronicsManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ExportSensorsActuatorsBuilder | Represents a NXOpen::Mechatronics::ExportSensorsActuatorsBuilder |
| ExpressionBlockBuilder | Represents a NXOpen::Mechatronics::ExpressionBlockBuilder builder |
| Slot | Represents Slot definition structure |
| ExpressionBlockCollection | Represents a collection of ExpressionBlockObject |
| iterator | Iterator for accessing the contents of the collection |
| ExpressionBlockFormula | Represents the ExpressionBlockFormula class |
| ExpressionBlockFormulaBuilder | Represents a Mechatronics::ExpressionBlockFormulaBuilder |
| ExpressionBlockFormulaCollection | Represents a collection of ExpressionBlock Formula |
| iterator | Iterator for accessing the contents of the collection |
| ExpressionBlockObject | Represents the ExpressionBlockObject class |
| ExternalConnection | Represents the External Connection class |
| ExternalConnectionBuilder | Represents a NXOpen::Mechatronics::ExternalConnection builder To create a new instance of this class, use NXOpen::Mechatronics::ExternalConnectionCollection::CreateExternalConnectionBuilder Created in NX8.0.0 |
| ExternalConnectionCollection | Represents a collection of External Connection |
| iterator | Iterator for accessing the contents of the collection |
| ExternalConnectionElement | Represents the External Connection Element class |
| ExternalConnectionElementBuilder | Represents a NXOpen::Mechatronics::ExternalConnectionElementBuilder builder To create a new instance of this class, use NXOpen::Mechatronics::ExternalConnectionCollection::CreateExternalConnectionElementBuilder Created in NX8.0.1 |
| ExternalConnectionElementBuilderList | Represents a list of objects |
| ExternalSignalConfigurationBuilder | Represents a NXOpen::Mechatronics::ExternalSignalConfigurationBuilder |
| ExternalSignalConfigurationCollection | Represents a collection of ExternalSignalConfigurationObject |
| iterator | Iterator for accessing the contents of the collection |
| ExternalSignalConfigurationObject | Represents a NXOpen::Mechatronics::ExternalSignalConfigurationObject |
| FixedJoint | Represents the Fixed Joint |
| FixedJointBuilder | Represents a NXOpen::Mechatronics::FixedJoint builder |
| FixedJointCollection | Represents a collection of Fixed Joint |
| iterator | Iterator for accessing the contents of the collection |
| ForceTorqueControl | Represents the ForceTorque Control |
| ForceTorqueControlBuilder | ForceTorque control builder for building a ForceTorque object |
| ForceTorqueControlCollection | Represents the ForceTorque collection for ForceTorque constraint |
| iterator | Iterator for accessing the contents of the collection |
| FunctionObject | Represents the Function object |
| FunctionObjectBuilder | Represents a NXOpen::Mechatronics::FunctionObjectBuilder To create a new instance of this class, use NXOpen::Mechatronics::FunctionObjectCollection::CreateFunctionObjectBuilder Created in NX7.5.1 |
| ParameterData | Defined Parameter Data Structure |
| RequirementData | Defined Requirement Data Structure |
| FunctionObjectCollection | Represents a NXOpen::Mechatronics::FunctionObjectCollection To obtain an instance of this class, refer to NXOpen::Mechatronics::MechatronicsManager Created in NX7.5.1 |
| iterator | Iterator for accessing the contents of the collection |
| GanttCollection | Represents a NXOpen::Mechatronics::GanttCollection To obtain an instance of this class, refer to NXOpen::Part Created in NX7.5.1 |
| iterator | Iterator for accessing the contents of the collection |
| GanttExportPLCopenBuilder | Represents a NXOpen::Mechatronics::GanttOperationObject builder To create a new instance of this class, use NXOpen::Mechatronics::GanttCollection::CreateGanttExportPlcopenBuilder Default values |
| GanttLinker | Represents the Gantt Linker class |
| GanttLinkerBuilder | Represents a NXOpen::Mechatronics::GanttLinkerBuilder To create a new instance of this class, use NXOpen::Mechatronics::GanttLinkerCollection::CreateGanttLinkerBuilder Created in NX10.0.0 |
| GanttLinkerCollection | Represents a NXOpen::Mechatronics::GanttCollection To obtain an instance of this class, refer to NXOpen::Part Created in NX10.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| GanttOperationBuilder | Represents a NXOpen::Mechatronics::GanttOperationBuilder builder To create a new instance of this class, use NXOpen::Mechatronics::GanttCollection::CreateGanttOperationBuilder Created in NX7.5.1 |
| GanttOperationConditionBuilder | Represents a NXOpen::Mechatronics::GanttOperationConditionBuilder To create a new instance of this class, use NXOpen::Mechatronics::GanttCollection::CreateGanttOperationConditionBuilder Created in NX7.5.1 |
| GanttOperationConditionBuilderList | Represents a list of objects |
| GanttOperationObject | Represents the Gantt Operation object |
| GanttOperationParameterBuilder | Represents a NXOpen::Mechatronics::GanttOperationParameterBuilder To create a new instance of this class, use NXOpen::Mechatronics::GanttCollection::CreateGanttOperationParameterBuilder Created in NX7.5.1 |
| GanttOperationParameterBuilderList | Represents a list of objects |
| Gear | Represents the Gear |
| GearBuilder | Represents a NXOpen::Mechatronics::Gear builder |
| GearCollection | Represents a collection of Gears |
| iterator | Iterator for accessing the contents of the collection |
| GenericSensor | Represents the Generic Sensor |
| GenericSensorBuilder | Represents a NXOpen::Mechatronics::GenericSensor builder |
| GenericSensorCollection | Represents a collection of Generic Sensor |
| iterator | Iterator for accessing the contents of the collection |
| GraphControl | Represents the Graph Control |
| GraphControlBuilder | Represents a NXOpen::Mechatronics::GraphControl builder To create a new instance of this class, use NXOpen::Mechatronics::GraphControlCollection::CreateGraphControlBuilder Created in NX8.0.0 |
| GraphControlCollection | Represents a collection of Graph Control |
| iterator | Iterator for accessing the contents of the collection |
| HingeJoint | Represents the Hinge Joint |
| HingeJointBuilder | Represents a NXOpen::Mechatronics::HingeJoint builder |
| HingeJointCollection | Represents a collection of Hinge Joint |
| iterator | Iterator for accessing the contents of the collection |
| HydraulicCylinder | Represents the Hydraulic Cylinder |
| HydraulicCylinderBuilder | Represents a NXOpen::Mechatronics::HydraulicCylinder builder |
| HydraulicCylinderCollection | Represents a collection of Hydraulic Cylinder |
| iterator | Iterator for accessing the contents of the collection |
| HydraulicValve | Represents the Hydraulic Valve |
| HydraulicValveBuilder | Represents a NXOpen::Mechatronics::HydraulicValve builder |
| HydraulicValveCollection | Represents a collection of Hydraulic Valve |
| iterator | Iterator for accessing the contents of the collection |
| Inclinometer | Represents the Inclinometer |
| InclinometerBuilder | Represents a NXOpen::Mechatronics::Inclinometer builder |
| InclinometerCollection | Represents a collection of Inclinometer |
| iterator | Iterator for accessing the contents of the collection |
| LimitSwitch | Represents the Limit Switch |
| LimitSwitchBuilder | Represents a NXOpen::Mechatronics::LimitSwitch builder |
| LimitSwitchCollection | Represents a collection of Limit Switch |
| iterator | Iterator for accessing the contents of the collection |
| LinearLimitJoint | Represents the Linear Limit Joint |
| LinearLimitJointBuilder | Represents a NXOpen::Mechatronics::LinearLimitJoint builder |
| LinearLimitJointCollection | Represents a collection of Linear Limit Joint |
| iterator | Iterator for accessing the contents of the collection |
| LinearSpringJoint | Represents the Linear Spring Joint |
| LinearSpringJointBuilder | Represents a NXOpen::Mechatronics::LinearSpringJoint builder |
| LinearSpringJointCollection | Represents a collection of Linear Spring Joint |
| iterator | Iterator for accessing the contents of the collection |
| LogicObject | Represents the Logic Object class |
| LogicObjectBuilder | Represents a NXOpen::Mechatronics::LogicObject builder To create a new instance of this class, use NXOpen::Mechatronics::LogicObjectCollection::CreateLogicObjectBuilder Created in NX8.5.0 |
| ParameterData | Defined Parameter Data Structure |
| LogicObjectCollection | Represents a NXOpen::Mechatronics::LogicObjectCollection To obtain an instance of this class, refer to NXOpen::Mechatronics::MechatronicsManager Created in NX8.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| MATLABClientBuilder | Represents a NXOpen::Mechatronics::MATLABClientBuilder This class is sub-object of another builder, and cannot be directly instantiated |
| SignalData | Defines the signal data |
| TagAttribute | Attribute of MATLAB item |
| TagInfo | Represents MATLABTag info definition structure |
| TagInfoEx | Represents Extended MATLAB nodes definition structure |
| MATLABSignalConnection | Represents the MATLAB Signal connection class |
| MATLABSignalConnectionBuilder | Represents a Mechatronics::MATLABSignalConnectionBuilder To create a new instance of this class, use NXOpen::Mechatronics::MATLABSignalConnectionCollection::CreateSignalConnectionBuilder Created in NX11.0.0 |
| MATLABSignalConnectionBuilderList | Represents a list of objects |
| MATLABSignalConnectionCollection | Represents a collection of Signal Connection |
| iterator | Iterator for accessing the contents of the collection |
| MCDSignalServerConfigurationBuilder | Represents a NXOpen::Mechatronics::MCDSignalServerConfigurationBuilder |
| MCDSignalServerConfigurationCollection | Represents a collection of MCDSignalServerConfigurationObject |
| iterator | Iterator for accessing the contents of the collection |
| MCDSignalServerConfigurationObject | Represents a NXOpen::Mechatronics::MCDSignalServerConfigurationObject |
| MechatronicsManager | Contains the collection objects for creating and iterating over Mechatronics Designer System Navigator objects |
| MechatronicsSession | Represents Mechatronics session To obtain an instance of this class, refer to NXOpen::Session Created in NX9.0.0 |
| MotionProfile | Represents the MotionProfile class |
| MotionProfileBuilder | Represents a NXOpen::Mechatronics::MotionProfile builder |
| MotionProfileCollection | Represents a collection of Motion Profile |
| iterator | Iterator for accessing the contents of the collection |
| ObjectInformationBuilder | Represents a NXOpen::Mechatronics::ObjectInformationBuilder This is a sub-builder class and cannot be directly instantiated Created in NX8.5.0 |
| ObjectSink | Represents the Object Sink |
| ObjectSinkBuilder | Represents a NXOpen::Mechatronics::ObjectSink builder |
| ObjectSinkCollection | Represents a collection of Object Sink |
| iterator | Iterator for accessing the contents of the collection |
| ObjectSource | Represents the Object Source |
| ObjectSourceBuilder | Represents a NXOpen::Mechatronics::ObjectSource builder |
| ObjectSourceCollection | Represents a collection of Object Source |
| iterator | Iterator for accessing the contents of the collection |
| ObjectTransformer | Represents the Object Transformer |
| ObjectTransformerBuilder | Represents a NXOpen::Mechatronics::ObjectTransformer builder |
| ObjectTransformerCollection | Represents a collection of Object Transformer |
| iterator | Iterator for accessing the contents of the collection |
| Observer | Represents the Observer class |
| ObserverBuilder | Represents a NXOpen::Mechatronics::ObserverBuilder |
| ParameterData | Defines the parameter data |
| ObserverCollection | Represents a collection of Observer |
| iterator | Iterator for accessing the contents of the collection |
| OPCClientBuilder | Represents a NXOpen::Mechatronics::OPCClientBuilder This class is sub-object of another builder, and cannot be directly instantiated |
| TagAttribute | Attribute of OPC item |
| TagInfo | Represents OPCDATag info definition structure |
| TagInfoEx | Represents Extended OPCDA Tag info definition structure |
| OPCUAClientBuilder | Represents a NXOpen::Mechatronics::OPCUAClientBuilder builder |
| TagInfo | Represents OPCUATag info definition structure |
| TagInfoV2 | The New Represents OPCUATag info definition structure |
| ParameterStockBuilder | Represents a NXOpen::Mechatronics::ParameterStockBuilder builder |
| PathConstraintFrameBuilder | Represents a frame that constrains the orientation along the path curve |
| PathConstraintFrameBuilderList | Represents a list of objects |
| PathConstraintJoint | Represents the Path Constraint Joint class |
| PathConstraintJointBuilder | Represents a NXOpen::Mechatronics::PathConstraintJoint builder |
| PathConstraintJointCollection | Represents a collection of Path Constraint Joint |
| iterator | Iterator for accessing the contents of the collection |
| PhysicsConstraint | Represents the mechatronics constraint class |
| PhysicsConstraintBuilder | This is an abstract class, and cannot be created |
| PhysicsJoint | Represents the mechatronics joint class |
| PhysicsJointBuilder | Represents a base builder for Physics Joints |
| PhysicsManager | A manager to deal with all physics objects |
| PhysicsPreference | Represents the Physics Preference class |
| PhysicsPreferenceCollection | Represents a collection of Physics Preference |
| iterator | Iterator for accessing the contents of the collection |
| PlanarJoint | Represents the Planar Joint |
| PlanarJointBuilder | Represents a NXOpen::Mechatronics::PlanarJoint builder |
| PlanarJointCollection | Represents a collection of Planar Joint |
| iterator | Iterator for accessing the contents of the collection |
| PlcSimAdvClientBuilder | Represents a NXOpen::Mechatronics::PlcSimAdvClientBuilder builder |
| TagInfo | Represents PLCTag info definition structure |
| TagInfoV2 | Represents Extended PLCTag info definition structure |
| PMNavFolderLocator | Represents the PMNav Folder Locator |
| PMNavFolderLocatorCollection | Represents a NXOpen::Mechatronics::PMNavFolderLocatorCollection To obtain an instance of this class, refer to NXOpen::Mechatronics::PhysicsManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PMNavFolderObject | Represents the PMNav Folder object |
| PMNavFolderObjectCollection | Represents a NXOpen::Mechatronics::PMNavFolderObjectCollection To obtain an instance of this class, refer to NXOpen::Mechatronics::PhysicsManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PneumaticCylinder | Represents the Pneumatic Cylinder |
| PneumaticCylinderBuilder | Represents a NXOpen::Mechatronics::PneumaticCylinder builder |
| PneumaticCylinderCollection | Represents a collection of Pneumatic Cylinder |
| iterator | Iterator for accessing the contents of the collection |
| PneumaticValve | Represents the Pneumatic Valve |
| PneumaticValveBuilder | Represents a NXOpen::Mechatronics::PneumaticValve builder |
| PneumaticValveCollection | Represents a collection of Pneumatic Valve |
| iterator | Iterator for accessing the contents of the collection |
| PointOnCurveJoint | Represents the PointOnCurve Joint |
| PointOnCurveJointBuilder | Represents a NXOpen::Mechatronics::PointOnCurveJoint builder To create a new instance of this class, use NXOpen::Mechatronics::PointOnCurveJointCollection::CreatePointOnCurveJointBuilder Default values |
| PointOnCurveJointCollection | Represents a collection of PointOnCurve Joint |
| iterator | Iterator for accessing the contents of the collection |
| PositionControl | Represents the Position Control |
| PositionControlBuilder | Represents a NXOpen::Mechatronics::PositionControlBuilder |
| PositionControlCollection | Represents a collection of Position Control |
| iterator | Iterator for accessing the contents of the collection |
| PositionSensor | Represents the Position Sensor |
| PositionSensorBuilder | Represents a NXOpen::Mechatronics::PositionSensor builder |
| PositionSensorCollection | Represents a collection of Position Sensor |
| iterator | Iterator for accessing the contents of the collection |
| PreferencesBuilder | Represents a NXOpen::Mechatronics::PreferencesBuilder builder |
| PreventCollision | Represents the Prevent Collision Constraint |
| PreventCollisionBuilder | Represents a NXOpen::Mechatronics::PreventCollision builder |
| PreventCollisionCollection | Represents a collection of Prevent Collision Constraint |
| iterator | Iterator for accessing the contents of the collection |
| ProfinetClientBuilder | Represents a Mechatronics::ProfinetClientBuilder builder This class is sub-object of another builder, and cannot be directly instantiated |
| TagInfo | Represents Profinet signal definition structure |
| TagInfoEx | Represents Profinet signal definition structure |
| ProxyObject | Represents the Proxy Object class |
| ProxyObjectBuilder | Represents a NXOpen::Mechatronics::ProxyObjectBuilder |
| ProxyObjectCollection | Represents a collection of Proxy Object |
| iterator | Iterator for accessing the contents of the collection |
| ProxyObjectParameterBuilder | Represents a NXOpen::Mechatronics::ProxyObjectParameterBuilder |
| ProxyObjectParameterBuilderList | Represents a list of objects |
| ProxyOverrideObject | Represents the Proxy Override Object class |
| ProxyOverrideObjectBuilder | Represents a NXOpen::Mechatronics::ProxyOverrideObjectBuilder |
| ProxyOverrideObjectCollection | Represents a collection of Proxy Override Object |
| iterator | Iterator for accessing the contents of the collection |
| RackPinion | Represents the Rack and Pinion |
| RackPinionBuilder | Represents a Mechatronics::RackPinion builder |
| RackPinionCollection | Represents a collection of RackPinion |
| iterator | Iterator for accessing the contents of the collection |
| ReadWriteDeviceBuilder | Represents a NXOpen::Mechatronics::ReadWriteDeviceBuilder |
| ReadWriteDeviceCollection | Represents a collection of ReadWriteDevice |
| iterator | Iterator for accessing the contents of the collection |
| ReadWriteDeviceObject | Represents the ReadWriteDeviceObject class |
| Relay | Represents the Relay |
| RelayBuilder | Represents a NXOpen::Mechatronics::Relay builder |
| RelayCollection | Represents a collection of Relay |
| iterator | Iterator for accessing the contents of the collection |
| ReplacePhysicsBuilder | Represents a NXOpen::Mechatronics::ReplacePhysicsBuilder builder |
| Requirement | Represents the Requirement class |
| RequirementBuilder | Represents a NXOpen::Mechatronics::Requirement builder To create a new instance of this class, use NXOpen::Mechatronics::RequirementCollection::CreateRequirementBuilder Created in NX8.5.0 |
| RequirementCollection | Represents a NXOpen::Mechatronics::RequirementCollection To obtain an instance of this class, refer to NXOpen::Mechatronics::MechatronicsManager Created in NX8.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| RigidBody | Represents the Rigid Body class |
| RigidBodyBuilder | Represents a NXOpen::Mechatronics::RigidBodyBuilder |
| RigidBodyCollection | Represents a collection of Rigid Body |
| iterator | Iterator for accessing the contents of the collection |
| RuntimeBehavior | Represents the Runtime Behavior class |
| RuntimeBehaviorBuilder | Represents a NXOpen::Mechatronics::RuntimeBehaviorBuilder |
| RuntimeBehaviorCollection | Represents a collection of Runtime Behavior |
| iterator | Iterator for accessing the contents of the collection |
| RuntimeFormula | Represents the Runtime Formula class |
| RuntimeFormulaBuilder | Represents a Mechatronics::RuntimeFormulaBuilder |
| RuntimeFormulaCollection | Represents a collection of RuntimeFormula |
| iterator | Iterator for accessing the contents of the collection |
| RuntimeFormulaParameter | Represents the Runtime Formula Parameter class |
| RuntimeFormulaParameterBuilder | Represents a NXOpen::Mechatronics::RuntimeFormulaParameterBuilder builder To create a new instance of this class, use NXOpen::Mechatronics::RuntimeFormulaCollection::CreateRuntimeFormulaParameterBuilder Created in NX8.5.0 |
| RuntimeFormulaParameterBuilderList | Represents a list of objects |
| RuntimeNCBuilder | Represents a NXOpen::Mechatronics::RuntimeNCBuilder |
| RuntimeNCCollection | Represents a collection of Runtime NC |
| iterator | Iterator for accessing the contents of the collection |
| RuntimeNCObject | Represents the RuntimeNCObject class |
| SCOUTExportBuilder | Represents a NXOpen::Mechatronics::SCOUTExportBuilder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateSCOUTExportBuilder Created in NX9.0.0 |
| SCOUTImportBuilder | Represents a NXOpen::Mechatronics::SCOUTImportBuilder , Nothing happened and no object returned when commit this builder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateSCOUTImportBuilder Created in NX9.0.0 |
| ScrewJoint | Represents the Screw Joint |
| ScrewJointBuilder | Represents a NXOpen::Mechatronics::ScrewJoint builder |
| ScrewJointCollection | Represents a collection of Screw Joint |
| iterator | Iterator for accessing the contents of the collection |
| SelectAdapterSignal | Represents a single object selection |
| SelectClassificationBuilder | Select a classification from the reuse library |
| SelectCollisionSensor | Represents a single object selection |
| SelectCollisionSensorList | Represents a list of objects on a selection list |
| SelectHydraulicCylinderList | Represents a list of objects on a selection list |
| SelectLogicObjectList | Represents a list of objects on a selection list |
| SelectPhysicsConstraint | Represents a single object selection |
| SelectPhysicsJoint | Represents a single object selection |
| SelectPneumaticCylinderList | Represents a list of objects on a selection list |
| SelectRigidBody | Represents a single object selection |
| SelectSystemObject | Represents a single object selection |
| SelectTagFormObject | Represents a single object selection |
| SensorsActuatorsListBuilder | Represents a NXOpen::Mechatronics::SensorsActuatorsListBuilder |
| ParameterData | Defines the parameter data |
| SensorsActuatorsListBuilderList | Represents a list of objects |
| SHMConfigurationBuilder | Represents a NXOpen::Mechatronics::SHMConfigurationBuilder builder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateSHMConfigurationBuilder Created in NX9.0.0 |
| SHMSignalClientBuilder | Represents a NXOpen::Mechatronics::SHMSignalClientBuilder builder |
| SHMInfo | Represents SHMInstance info definition structure |
| SHMSignal | Represents SHMTag info definition structure |
| SHMSignalEx | Represents SHMTag info definition structure |
| SHMSignalConnection | Represents the SHM Signal connection class |
| SHMSignalConnectionBuilder | Represents a NXOpen::Mechatronics::SHMSignalConnectionBuilder To create a new instance of this class, use NXOpen::Mechatronics::SHMSignalConnectionCollection::CreateSHMSignalConnectionBuilder Created in NX9.0.0 |
| SHMSignalConnectionBuilderList | Represents a list of objects |
| SHMSignalConnectionCollection | Represents a collection of SHM Signal Connection |
| iterator | Iterator for accessing the contents of the collection |
| SHMSignalProviderBuilder | Represents a NXOpen::Mechatronics::SHMSignalProviderBuilder This class is sub-object of another builder, and cannot be directly instantiated |
| SignalInfo | Represents SHMProviderSignal info definition structure |
| Signal | Represents the Signal class |
| SignalAdapter | Represents the Signal Adapter class |
| SignalAdapterBuilder | Represents a NXOpen::Mechatronics::SignalAdapterBuilder |
| ParameterData | Defines the parameter data |
| SignalData | Defines the signal data |
| SignalAdapterCollection | Represents a collection of Signal Adapter |
| iterator | Iterator for accessing the contents of the collection |
| SignalBuilder | Represents a NXOpen::Mechatronics::SignalBuilder builder |
| Signal | Represents Signal definition structure |
| SignalCollection | Represents a collection of Signal |
| iterator | Iterator for accessing the contents of the collection |
| SignalConnection | Represents the Signal connection class |
| SignalConnectionBuilder | Represents a NXOpen::Mechatronics::SignalConnectionBuilder To create a new instance of this class, use NXOpen::Mechatronics::SignalConnectionCollection::CreateSignalConnectionBuilder Created in NX8.5.0 |
| SignalConnectionBuilderList | Represents a list of objects |
| SignalConnectionCollection | Represents a collection of Signal Connection |
| iterator | Iterator for accessing the contents of the collection |
| SignalMappingBuilder | Represents a NXOpen::Mechatronics::SignalMappingBuilder To create a new instance of this class, use NXOpen::Mechatronics::PhysicsManager::CreateSignalMappingBuilder Created in NX8.5.0 |
| SignalMappingConnection | Represents the Signal Mapping Connection class |
| SignalMappingConnectionBuilder | Represents a Mechatronics::SignalMappingConnectionBuilder |
| SignalMappingConnectionBuilderList | Represents a list of objects |
| SignalMappingConnectionCollection | Represents a collection of Signal Connection |
| iterator | Iterator for accessing the contents of the collection |
| SlidingJoint | Represents the Sliding Joint |
| SlidingJointBuilder | Represents a NXOpen::Mechatronics::SlidingJoint builder |
| SlidingJointCollection | Represents a collection of Sliding Joint |
| iterator | Iterator for accessing the contents of the collection |
| SpeedControl | Represents the Speed Control |
| SpeedControlBuilder | Represents a NXOpen::Mechatronics::SpeedControl builder |
| SpeedControlCollection | Represents a collection of Speed Constraint |
| iterator | Iterator for accessing the contents of the collection |
| SpringDamper | Represents the Spring Damper |
| SpringDamperBuilder | Represents a NXOpen::Mechatronics::SpringDamper builder |
| SpringDamperCollection | Represents a collection of Spring Damper |
| iterator | Iterator for accessing the contents of the collection |
| SymbolTable | Represents the SymbolTable class |
| SymbolTableBuilder | Represents a NXOpen::Mechatronics::SymbolTableBuilder builder |
| Symbol | Represents Symbol definition structure |
| SymbolV2 | Represents Symbol definition structure version 2 |
| SymbolTableCollection | Represents a collection of SymbolTable |
| iterator | Iterator for accessing the contents of the collection |
| SystemObject | Represents the System Object |
| SystemObjectBuilder | Represents a NXOpen::Mechatronics::SystemObject builder This is an abstract class and cannot be created |
| SystemRoot | Represents the System Root class |
| TagFormBuilder | Represents a NXOpen::Mechatronics::TagFormBuilder |
| TagFormCollection | Represents a collection of TagForm |
| iterator | Iterator for accessing the contents of the collection |
| TagFormObject | Represents the TagFormObject class |
| TagTableBuilder | Represents a NXOpen::Mechatronics::TagTableBuilder builder |
| TagTableCollection | Represents a collection of TagTable |
| iterator | Iterator for accessing the contents of the collection |
| TagTableObject | Represents the TagTableObject class |
| TCPClientBuilder | Represents a Mechatronics::TCPClientBuilder builder |
| Signal | Represents TCP signal definition structure |
| SignalEx | Represents TCP signal definition structure |
| TCPSignalServerBuilder | Represents a Mechatronics::TCPSignalServerBuilder builder |
| Signal | Represents the data type |
| ThreeJointCoupler | Represents the ThreeJointCoupler |
| ThreeJointCouplerBuilder | Represents the builder class to create or edit a NXOpen::Mechatronics::ThreeJointCoupler object |
| ThreeJointCouplerCollection | Represents a collection of ThreeJointCouplers |
| iterator | Iterator for accessing the contents of the collection |
| Tracer | Represents the Tracer class |
| TracerBuilder | Represents a Mechatronics::Tracer builder To create a new instance of this class, use NXOpen::Mechatronics::TracerCollection::CreateTracerBuilder Created in NX12.0.0 |
| TracerCollection | Represents a collection of Tracer |
| iterator | Iterator for accessing the contents of the collection |
| TransmitterEntry | Represents the Transmitter Entry |
| TransmitterEntryBuilder | Represents a NXOpen::Mechatronics::TransmitterEntry builder |
| TransmitterEntryCollection | Represents a collection of Transmitter Entry |
| iterator | Iterator for accessing the contents of the collection |
| TransmitterExit | Represents the Transmitter Exit |
| TransmitterExitBuilder | Represents a NXOpen::Mechatronics::TransmitterExit builder |
| TransmitterExitCollection | Represents a collection of Transmitter Exit |
| iterator | Iterator for accessing the contents of the collection |
| TransportSurface | Represents the Transport Surface class |
| TransportSurfaceBuilder | Represents a NXOpen::Mechatronics::TransportSurfaceBuilder |
| TransportSurfaceCollection | Represents a collection of Transport Surface |
| iterator | Iterator for accessing the contents of the collection |
| UDPSignalClientBuilder | Represents a Mechatronics::UDPSignalClientBuilder builder |
| Signal | Represents the data type |
| SignalEx | Represents the data type |
| UDPSignalServerBuilder | Represents a Mechatronics::UDPSignalServerBuilder builder |
| Signal | Represents the data type |
| VelocitySensor | Represents the Velocity Sensor |
| VelocitySensorBuilder | Represents a NXOpen::Mechatronics::VelocitySensor builder |
| VelocitySensorCollection | Represents a collection of Velocity Sensor |
| iterator | Iterator for accessing the contents of the collection |
| VirtualAxis | Represents the Virtual Axis |
| VirtualAxisBuilder | Represents a NXOpen::Mechatronics::VirtualAxis builder To create a new instance of this class, use NXOpen::Mechatronics::VirtualAxisCollection::CreateVirtualAxisBuilder Created in NX10.0.0 |
| VirtualAxisCollection | Represents a collection of Virtual Axis |
| iterator | Iterator for accessing the contents of the collection |
| MenuBar | Provides classes and interfaces for the Menu Bar |
| ApplicationProperties | Implements the properties for the Menu Applications Created in NX1847.0.0 |
| ContextMenu | Represents a Context Menu Created in NX8.5.0 |
| ContextMenuEntry | Represents an entry on a context menu |
| ContextMenuProperties | Provides information about the MenuBar.ContextMenu object being customized |
| MenuBarManager | Interface for the MenuBarManager object To obtain an instance of this class, refer to NXOpen::UI Created in NX6.0.0 |
| MenuButton | Implements the Object for Menu Buttons Created in NX6.0.0 |
| MenuButtonEvent | Implements the Event Object for Menu Buttons Created in NX6.0.0 |
| Mfg | Provides classes and interfaces for Manufacturing |
| AM | |
| ApplicationManager | Represents the Additive Manufacturing application Use the static method in this class to obtain an instance |
| AttributeClipboard | Attribute clipboard To obtain an instance of this class use NXOpen::Mfg::AM::ApplicationManager |
| BuildTray | Interface for Model Build Tray objects To create a new instance of this class, use NXOpen::Mfg::AM::ApplicationManager::GetBuildTray Created in NX11.0.1 |
| Library | Interface for Services Profile Library objects To obtain an instance of this class use NXOpen::Mfg::AM::ApplicationManager |
| MeshProperties | Represents a mesh properties builder To obtain an instance of this class use JAX_MFG_AM_ApplicationManager_GetMeshProperties Default values |
| Nester3D | Interface for AM Nesting Dialog Builder To create a new instance of this class, use NXOpen::Mfg::AM::ApplicationManager::Get3DNester Default values |
| NestingStatus | Nesting Status Created in NX11.0.2 |
| Part | Interface for Model Part objects To obtain an instance of this class use JAX_MFG_AM_BUILDTRAY_GetAllParts Created in NX11.0.1 |
| PartRegion | Interface for Model Part objects To obtain an instance of this class use JAX_MFG_AM_PART_GetRegions Created in NX1847.0.0 |
| Printer | Printer Created in NX11.0.1 |
| PrinterManager | Represents the Additive Manufacturing Printer Service Use the static method in this class to obtain an instance |
| PrintJob | Print Job Created in NX11.0.1 |
| Profile | Interface for Services Profile objects To obtain an instance of this class use NXOpen::Mfg::AM::ProfileLibrary |
| ProfileLibrary | Interface for Services Profile Library objects To obtain an instance of this class use NXOpen::Mfg::AM::ApplicationManager |
| ProfileObject | Interface for Services Profile objects To obtain an instance of this class use NXOpen::Mfg::AM::ProfileObject |
| ProfileSupport | Interface for Services Profile Library objects To obtain an instance of this class use NXOpen::Mfg::AM::Profile |
| SelectPartList | Represents a list of objects on a selection list |
| SimulationSupport | Additive Manufacturing Surface Region Created in NX1847.0.0 |
| Sketcher | Represents a Mfg::AM::Sketcher builder To create a new instance of this class, use NXOpen::Mfg::AM::SupportBuilder::Sketcher Default values |
| Support | Interface for Model Support objects To obtain an instance of this class use Part.CreateSupports Created in NX11.0.1 |
| SupportBuilder | Represents a Mfg::AM::Support builder To create a new instance of this class, use NXOpen::Mfg::AM::ApplicationManager::GetSupportBuilder Default values |
| SupportLibrary | Interface for Services Support Library objects To obtain an instance of this class use NXOpen::Mfg::AM::SupportLibrary |
| SurfaceRegion | Additive Manufacturing Surface Region To obtain an instance of this class use Support.GetSurfaceRegion Created in NX12.0.1 |
| Mlp | Provides classes and interfaces for Machining Line Planner |
| Blank | Represents a Machining Line Planner blank To obtain an instance of this class use GetBlankModel of Product |
| Command | Represents a Machining Line Planner command To obtain an instance of this class use NXOpen::Mfg::Mlp::MachiningLinePlanner::CreateCommand |
| InProcessFeature | Represents a Machining Line Planner in-process feature To obtain an instance of this class use GetInProcessFeatures of Operation or MachiningFeature |
| Input | Represents a Machining Line Planner command input To obtain an instance of this class use NXOpen::Mfg::Mlp::Command::CreateInput |
| IProcess | Interface to the Machining Line Planner process This is an abstract class, and cannot be instantiated |
| IResource | Interface to the Machining Line Planner resource This is an abstract class, and cannot be instantiated |
| Line | Represents a Machining Line Planner line To obtain an instance of this class use GetLine of ProcessPlan or ProcessSetup |
| MachineTool | Represents a Machining Line Planner machine tool To obtain an instance of this class use GetMachineTool (not yet implemented!) of ProcessSetup |
| MachiningFeature | Represents a Machining Line Planner machining feature To obtain an instance of this class use GetMachiningFeature of InProcessFeature or GetMachiningFeatures of Workpiece or PartFeature |
| MachiningLinePlanner | Represents the Line Planner To obtain an instance use the static method NXOpen::Mfg::Mlp::MachiningLinePlanner::GetMachiningLinePlanner |
| Operation | Represents a Machining Line Planner operation To obtain an instance of this class use GetOperation of InProcessFeature or GetOperations of ProcessSetup |
| Part | Represents a Machining Line Planner part To obtain an instance of this class use GetPartModel of Product or PartFeature |
| PartFeature | Represents a Machining Line Planner part-feature To obtain an instance of this class use GetPartFeature of MachiningFeature or GetPartFeatures or Part |
| ProcessPlan | Represents a Machining Line Planner process plan To obtain an instance of this class use NXOpen::Mfg::Mlp::MachiningLinePlanner Created in NX11.0.1 |
| ProcessSetup | Represents a Machining Line Planner process setup To obtain an instance of this class use GetSetup of Operation, Workpiece or ToolSet or GetSetups on ProcessPlan or Line |
| Product | Represents a Machining Line Planner product To obtain an instance of this class use GetProducts of ProcessPlan |
| ToolAssembly | Represents a Machining Line Planner tool assembly To obtain an instance of this class use (not yet implemented!) GetToolAssembly of Operation |
| ToolSet | Represents a Machining Line Planner tool set To obtain an instance of this class use GetToolSet of ToolAssembly |
| Workpiece | Represents a Machining Line Planner workpiece To obtain an instance of this class, use GetWorkpiece of MachiningFeature or GetWorkpieces of ProcessSetup or Product |
| MfgModel | Provides classes and interfaces for Manufacturing Model |
| MFGViewMaker | Provides classes and interfaces for MFG View Maker |
| CloneModelViewsBuilder | Clone Model Views To create a new instance of this class, use NXOpen::MFGViewMaker::MFGViewMakerManager::CreateCloneModelViewsBuilder Default values |
| MFGViewMakerApplicationBuilder | Represents a class to create enter and exit the MFGViewMaker application |
| MFGViewMakerManager | Represents a manager of MFGViewMaker builders Use the static method in this class to obtain an instance |
| ModlDirect | Provides classes and interfaces for Direct Modeling |
| SelectBlend | Represents a NXOpen::ModlDirect::SelectBlend Allows user to specify blend faces |
| ModlUtils | Provides classes and interfaces for ModlUtils |
| Motion | Provides classes and interfaces for Motion Simulation |
| AdamsSolverProperty | Represents a NXOpen::Motion::AdamsSolverProperty Created in NX5.0.0 |
| AddSubmechanismBuilder | Represents a builder class that performs add submechanism in current context |
| AdvancedSolution | Represents a Motion::AdvancedSolution |
| AdvancedSolutionBuilder | Represents a NXOpen::Motion::AdvancedSolution builder To create a new instance of this class, use NXOpen::Motion::MotionSolutionCollection::CreateAdvancedSolutionBuilder Created in NX12.0.0 |
| AnalyticalContact | Represents an Analytical Contact motion object |
| AnalyticalContactBuilder | Represents a Motion::AnalyticalContact builder To create a new instance of this class, use NXOpen::Motion::AnalyticalContactCollection::CreateAnalyticalContactBuilder Default values |
| AnalyticalContactCollection | Represents a collection of Analytical Contact objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| AnalyticalContactProperty | Represents an Analytical Contact Property |
| AnalyticalContactPropertyBuilder | Represents a Motion::AnalyticalContactProperty builder To create a new instance of this class, use NXOpen::Motion::AnalyticalContactPropertyCollection::CreateAnalyticalContactPropertyBuilder Default values |
| AnalyticalContactPropertyCollection | Represents a collection of Analytical Contact Property objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Animation | Represents an Animation No Creator Created in NX1847.0.0 |
| AnimationCollection | Represents a collection of NXOpen::Motion::Animation elements To obtain an instance of this class, refer to NXOpen::Motion::MotionSolution Created in NX1847.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| AnimationControl | Represents the NXOpen::Motion::AnimationControl An instance of this class can not be obtained Created in NX9.0.0 |
| AnimationConversionBuilder | Represents a NXOpen::Motion::AnimationConversionBuilder builder To create a new instance of this class, use NXOpen::Motion::MotionSession::CreateAnimationConversionBuilder Created in NX12.0.2 |
| ArticulationControl | Represents the NXOpen::Motion::ArticulationControl An instance of this class can not be obtained Created in NX9.0.0 |
| AutoFlexProperty | Represents the Motion AutoFlexProperty class |
| AutoFlexPropertyBuilder | Represents a builder of automatic flex property object To create a new instance of this class, use NXOpen::Motion::AutoFlexPropertyCollection::CreateAutoFlexPropertyBuilder Default values |
| AutoFlexPropertyCollection | Represents a collection of Motion::AutoFlexProperty objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX1847.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BaseSection | Represents a base section function To create or edit an instance of this class, use NXOpen::Motion::BaseSectionBuilder Created in NX12.0.0 |
| BaseSectionBuilder | Represents a Motion::BaseSectionBuilder |
| BaseSectionCollection | Represents a collection of BaseSections To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BeamForce | Represents a BeamForce To create or edit an instance of this class, use NXOpen::Motion::BeamForceBuilder Created in NX12.0.0 |
| BeamForceBuilder | Represents a Motion::BeamForceBuilder builder To create a new instance of this class, use NXOpen::Motion::BeamForceCollection::CreateBeamForceBuilder Default values |
| BeamForceCollection | Represents a collection of BeamForces To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BodyContact | Represents a NXOpen::Motion::BodyContact To create or edit an instance of this class, use NXOpen::Motion::BodyContactBuilder Created in NX5.0.0 |
| BodyContactAdams | Represents a NXOpen::Motion::BodyContactAdams Created in NX5.0.0 |
| BodyContactBuilder | Represents a NXOpen::Motion::BodyContactBuilder To create a new instance of this class, use NXOpen::Motion::BodyContactCollection::CreateBodyContactBuilder Default values |
| BodyContactCollection | Represents a collection of 3D contact objects.Any contact object must be created and found through this class To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BodyContactLms | Represents a NXOpen::Motion::BodyContactLms Created in NX10.0.0 |
| BodyContactRecurdyn | Represents a NXOpen::Motion::BodyContactRecurdyn Created in NX5.0.0 |
| BodyContactSphereToCAD | Represents a NXOpen::Motion::BodyContactSphereToCAD Created in NX12.0.0 |
| Bushing | Represents a bushing To create or edit an instance of this class, use NXOpen::Motion::BushingBuilder Created in NX6.0.0 |
| BushingActuatorCoefficients | Represents a Motion BushingActuatorCoefficients |
| BushingBuilder | Represents a Motion BushingBuilder To create a new instance of this class, use NXOpen::Motion::BushingCollection::CreateBushingBuilder Default values |
| BushingCoefficients | Represents a Motion BushingCoefficients |
| BushingCollection | Represents a collection of motion joints To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BushingCylindricalCoefficients | Represents a Motion BushingCylindricalCoefficients |
| BushingCylindricalCoefficientsComponent | Represents a Motion BushingCylindricalCoefficientsComponent |
| BushingDampingCoefficients | Represents a Motion BushingDampingCoefficients |
| BushingDefine | Represents a Motion BushingDefine Created in NX6.0.0 |
| BushingGeneralCoefficients | Represents a Motion BushingGeneralCoefficients |
| BushingGeneralCoefficientsComponent | Represents a Motion BushingGeneralCoefficientsComponent |
| BushingSphericalCoefficients | Represents a Motion BushingSphericalCoefficients |
| BushingSphericalCoefficientsComponent | Represents a Motion BushingSphericalCoefficientsComponent |
| BushingStiffnessCoefficients | Represents a Motion BushingStiffnessCoefficients |
| ConfigurationFloatParameter | Represents a Motion::ConfigurationFloatParameter |
| ConfigurationIntegerParameter | Represents a Motion::ConfigurationIntegerParameter |
| ConfigurationParameter | Represents a Motion::ConfigurationParameter |
| ConfigurationParameterList | Represents a list of objects |
| ConfigurationTextParameter | Represents a Motion::ConfigurationTextParameter |
| Connector | Represents a connector This is an abstract class, and cannot be created |
| ConnectorBuilder | Represents ConnectorBuilder This is an abstract class, and cannot be created |
| ControlInput | Represents a Control Input motion object |
| ControlInputBuilder | Represents a Motion::ControlInput builder To create a new instance of this class, use NXOpen::Motion::ControlInputCollection::CreateControlInputBuilder Created in NX11.0.0 |
| ControlInputCollection | Represents a collection of Control Input objects |
| iterator | Iterator for accessing the contents of the collection |
| ControlInputPortBuilder | Represents a Motion::ControlPort builder specific to control input element |
| ControlInputPortBuilderList | Represents a list of objects |
| ControlOutput | Represents a Control Output motion object |
| ControlOutputBuilder | Represents a Motion::ControlOutput builder To create a new instance of this class, use NXOpen::Motion::ControlOutputCollection::CreateControlOutputBuilder Default values |
| ControlOutputCollection | Represents a collection of Control Output objects |
| iterator | Iterator for accessing the contents of the collection |
| ControlPort | Represents a motion control port object class |
| ControlPortCollection | Represents a collection of Control Port objects To obtain an instance of this class, refer to NXOpen::Motion::ControlInput Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Coupler | Represents a motion coupler object This is an abstract class, and cannot be created |
| CouplerBuilder | Represents a NXOpen::Motion::CouplerBuilder This is an abstract class, and cannot be created |
| CouplerCable | Represents a motion cable object To create or edit an instance of this class, use NXOpen::Motion::CouplerCableBuilder Created in NX6.0.0 |
| CouplerCableBuilder | Represents a NXOpen::Motion::CouplerCableBuilder To create a new instance of this class, use NXOpen::Motion::CouplerCollection::CreateCouplerCableBuilder Created in NX6.0.0 |
| CouplerCollection | Represents a collection of motion couplers To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CouplerGear | Represents a motion gear object To create or edit an instance of this class, use NXOpen::Motion::CouplerGearBuilder Created in NX6.0.0 |
| CouplerGearBuilder | Represents a NXOpen::Motion::CouplerGearBuilder To create a new instance of this class, use NXOpen::Motion::CouplerCollection::CreateCouplerGearBuilder Created in NX6.0.0 |
| CouplerRckpn | Represents a motion rack and pinion object To create or edit an instance of this class, use NXOpen::Motion::CouplerRckpnBuilder Created in NX6.0.0 |
| CouplerRckpnBuilder | Represents a NXOpen::Motion::CouplerRckpnBuilder To create a new instance of this class, use NXOpen::Motion::CouplerCollection::CreateCouplerRckpnBuilder Created in NX6.0.0 |
| CurveContact | Represents a NXOpen::Motion::CurveContact To create or edit an instance of this class, use NXOpen::Motion::CurveContactBuilder Created in NX5.0.0 |
| CurveContactAdams | Represents a NXOpen::Motion::CurveContactAdams Created in NX5.0.0 |
| CurveContactBuilder | Represents a NXOpen::Motion::CurveContactBuilder To create a new instance of this class, use NXOpen::Motion::CurveContactCollection::CreateCurveContactBuilder Default values |
| CurveContactCollection | Represents a collection of 2D contact objects.Any 2D contact object must be created and found through this class To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CurveContactRecurdyn | Represents a NXOpen::Motion::CurveContactRecurdyn Created in NX5.0.0 |
| CurveOnCurve | Represents a curve on curve To create or edit an instance of this class, use NXOpen::Motion::CurveOnCurveBuilder Created in NX6.0.0 |
| CurveOnCurveBuilder | Represents a NXOpen::Motion::CurveOnCurveBuilder To create a new instance of this class, use NXOpen::Motion::CurveOnCurveCollection::CreateCurveOnCurveBuilder Created in NX6.0.0 |
| CurveOnCurveCollection | Represents a collection of curve on curve objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CustomizedMaterialBuilder | Represents a Motion::CustomizedMaterialBuilder |
| Damper | Represents a damper To create or edit an instance of this class, use NXOpen::Motion::DamperBuilder Created in NX6.0.0 |
| DamperBuilder | Represents a DamperBuilder To create a new instance of this class, use NXOpen::Motion::DamperCollection::CreateDamperBuilder Created in NX6.0.0 |
| DamperCollection | Represents a collection of motion damper To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DiscreteDrivetrain | Represents a Discrete Drivetrain motion object |
| DiscreteDrivetrainBuilder | Represents a Motion::DiscreteDrivetrain builder |
| DiscreteDrivetrainCollection | Represents a collection of Discrete Drivetrain objects |
| iterator | Iterator for accessing the contents of the collection |
| DiscreteDrivetrainLayout | Represents a discrete drivetrain layout motion object |
| DiscreteDrivetrainLayoutBuilder | Represents a Motion::DiscreteDrivetrainLayout builder |
| DiscreteDrivetrainLayoutBuilderList | Represents a list of objects |
| DiscreteDrivetrainLayoutCollection | Represents a collection of discrete drivetrain layout objects |
| iterator | Iterator for accessing the contents of the collection |
| DiscreteDrivetrainPattern | Represents a discrete drivetrain pattern motion object |
| DiscreteDrivetrainPatternBuilder | Represents a Motion::DiscreteDrivetrainPattern builder |
| DiscreteDrivetrainPatternBuilderList | Represents a list of objects |
| DiscreteDrivetrainPatternCollection | Represents a collection of discrete drivetrain pattern objects |
| iterator | Iterator for accessing the contents of the collection |
| DiscreteDrivetrainReport | Represents a discrete drivetrain report motion object |
| DiscreteDrivetrainReportBuilder | Represents a Motion::DiscreteDrivetrainReport builder |
| DiscreteDrivetrainReportBuilderList | Represents a list of objects |
| DiscreteDrivetrainReportCollection | Represents a collection of discrete drivetrain report objects |
| iterator | Iterator for accessing the contents of the collection |
| DriverMotionsData | Represents a NXOpen::Motion::DriverMotionsData Created in NX11.0.0 |
| DriverMultiOperations | Represents a NXOpen::Motion::DriverMultiOperations Created in NX6.0.0 |
| DriverOperation | Represents a NXOpen::Motion::DriverOperation Created in NX5.0.0 |
| ExpressionFunctionBuilder | Represents a ExpressionFunctionBuilder builder Created in NX11.0.0 |
| FieldData | Represents a Motion::FieldData |
| FieldDataCollection | Represents a collection of motion field data (profile) objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.1 |
| iterator | Iterator for accessing the contents of the collection |
| FlexBody | Represents the Motion FlexBody class.It must be associated with a Motion Body |
| FlexBodyBuilder | Represents a NXOpen::Motion::FlexBody builder To create a new instance of this class, use NXOpen::Motion::FlexBodyCollection::CreateFlexBodyBuilder Default values |
| FlexBodyCollection | Represents a collection of flexible body objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| FlexCurveBuilder | Represents a Motion::FlexCurveBuilder builder Created in NX1847.0.0 |
| FlexDamping | Represents the physical damping settings for flexible body Created in NX1847.0.0 |
| FlexDampingBuilder | Represents a Motion::FlexDampingBuilder builder To obtain an instance of this object use NXOpen::Motion::FlexBody::GetFlexibleDampingSettings |
| FlexPhysicalDampingSettings | Represents the physical damping settings for flexible body Created in NX7.5.0 |
| FlexSurfaceBuilder | Represents a Motion::FlexSurfaceBuilder builder Created in NX1847.0.0 |
| GeneralCoupler | Represents motion 2-3 joint coupler To create or edit an instance of this class, use NXOpen::Motion::GeneralCouplerBuilder Created in NX7.5.0 |
| GeneralCouplerBuilder | Represents a NXOpen::Motion::GeneralCouplerBuilder To create a new instance of this class, use NXOpen::Motion::GeneralCouplerCollection::CreateGeneralCouplerBuilder Default values |
| GeneralCouplerCollection | Represents a collection of 2-3 joint coupler objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| GlobalSelectionBuilder | Global Selection no creator Created in NX1847.0.0 |
| Graph | Represents a graph, only creation is supported To create or edit an instance of this class, use NXOpen::Motion::GraphObjectBuilder Created in NX5.0.0 |
| GraphBuilder | Represents a NXOpen::Motion::GraphBuilder , only creation is supported To create a new instance of this class, use NXOpen::Motion::GraphManager::CreateGraphBuilder |
| CurveData | Contains the structure of curve associated with curve data |
| GraphLegendData | Represents a motion graph legend data Not support KF |
| GraphManager | Represents a collection of Graph objects, only creation is supported To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| GraphObjectBuilder | Represents a NXOpen::Motion::GraphObjectBuilder , only creation is supported To create a new instance of this class, use NXOpen::Motion::GraphManager::CreateGraphObjectBuilder Created in NX11.0.0 |
| IGraphSource | Represents an interface IGraphSource Created in NX11.0.0 |
| InputPortAssociation | Represents a Motion::InputPortAssociation |
| InputPortAssociationList | Represents a list of objects |
| IPostControl | Represents an interface IPostControl Created in NX11.0.0 |
| Joint | Represents a motion joint object To create or edit an instance of this class, use NXOpen::Motion::JointBuilder Created in NX5.0.0 |
| JointBuilder | This builder class is used to create or edit NXOpen::Motion::Joint objects |
| JointCollection | Represents a collection of motion joints To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| JointDefine | Represents a joint define object |
| JointDriver | Represents a joint driver To create or edit an instance of this class, use NXOpen::Motion::JointDriverBuilder Created in NX5.0.0 |
| JointDriverBuilder | Represents a NXOpen::Motion::JointDriverBuilder To create a new instance of this class, use NXOpen::Motion::JointDriverCollection::CreateJointDriverBuilder Created in NX5.0.0 |
| JointDriverCollection | Represents a collection of Driver objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| JointFriction | Represents a joint friction object Created in NX5.0.0 |
| JointFrictionAdams | Represents a adams joint friction object Created in NX5.0.0 |
| JointFrictionLms | Represents a lms joint friction object Created in NX10.0.0 |
| JointFrictionRecurDyn | Represents a recurdyn joint friction object Created in NX5.0.0 |
| Link | Represents the Motion Link class |
| LinkAttachmentData | Represents a Motion::LinkAttachmentData |
| LinkBuilder | Represents a NXOpen::Motion::LinkBuilder To create a new instance of this class, use NXOpen::Motion::LinkCollection::CreateLinkBuilder Created in NX5.0.0 |
| LinkCollection | Represents a collection of motion bodies To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LinkCoupler | Represents a NXOpen::Motion::LinkCoupler To create or edit an instance of this class, use NXOpen::Motion::LinkCouplerBuilder Created in NX12.0.0 |
| LinkCouplerBuilder | Represents a NXOpen::Motion::LinkCouplerBuilder To create a new instance of this class, use NXOpen::Motion::LinkCouplerCollection::CreateLinkCouplerBuilder Default values |
| LinkCouplerCollection | Represents a collection of LinkCoupler objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LinkCouplerCoupleBuilder | Represents a NXOpen::Motion::LinkCouplerCoupleBuilder Created in NX12.0.0 |
| LinkDriver | Represents a Motion Body Driver To create or edit an instance of this class, use NXOpen::Motion::LinkDriverBuilder Created in NX11.0.0 |
| LinkDriverBuilder | Represents a NXOpen::Motion::LinkDriverBuilder To create a new instance of this class, use NXOpen::Motion::LinkDriverCollection::CreateLinkDriverBuilder Created in NX11.0.0 |
| LinkDriverCollection | Represents a collection of LinkDriver objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LinkInitialVelocity | Represents a NXOpen::Motion::LinkInitialVelocity |
| LinkMassProperty | Represents a NXOpen::Motion::LinkMassProperty |
| LmsSolverProperty | Represents a NXOpen::Motion::LmsSolverProperty Created in NX10.0.0 |
| LoadTransfer | Represents a Motion Load Transfer class To create or edit an instance of this class, use NXOpen::Motion::LoadTransferBuilder Created in NX9.0.0 |
| LoadTransferBuilder | Represents a NXOpen::Motion::LoadTransferBuilder To create a new instance of this class, use NXOpen::Motion::LoadTransferCollection::CreateLoadTransferBuilder Default values |
| LoadTransferCollection | Represents a collection of load transfer objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LoadTransferControl | Represents the NXOpen::Motion::LoadTransferControl No support for KF Created in NX9.0.0 |
| Marker | Represents the Motion Marker class |
| MarkerBuilder | Represents a builder of Marker To create a new instance of this class, use NXOpen::Motion::MarkerCollection::CreateMarkerBuilder Default values |
| MarkerCollection | Represents a collection of Markers To obtain an instance of this class, refer to NXOpen::Part Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MarkerToNodeData | Represents the marker to node data which is a list item in NXOpen::Motion::FlexBodyBuilder |
| MechanismExport | Represents a Mechanism Export object used to export one or more Motion objects to a text file |
| MechanismImport | Represents a Mechanism Import object used to import a Motion model from a text file |
| Mechatronics | Represents a Motion::Mechatronics |
| MechatronicsBuilder | Represents a Motion::Mechatronics builder To create a new instance of this class, use NXOpen::Motion::MechatronicsCollection::CreateMechatronicsBuilder Default values |
| MechatronicsCollection | Represents a collection of Mechatronics To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MechatronicsPortCollection | Represents a collection of ports used as outputs by Mechatronics To obtain an instance of this class, refer to NXOpen::Motion::Mechatronics Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MotionBuilder | This builder class is used to create or edit NXOpen::Motion::MotionObject This is an abstract class, and cannot be created |
| MotionEnvironment | Represents a Motion Environment To obtain an instance of this class, refer to NXOpen::Motion::MotionSession Created in NX7.5.0 |
| MotionFunction | Represents a Motion Function Object To create or edit an instance of this class, use NXOpen::CAE::FunctionBuilder Created in NX11.0.0 |
| MotionManager | A manager to deal with all motion objects To obtain an instance of this class, refer to NXOpen::Part Created in NX5.0.0 |
| MotionMethods | Represents a NXOpen::Motion::MotionMethods class To obtain an instance of this class, refer to NXOpen::Motion::MotionSession Created in NX8.0.0 |
| MotionObject | Represents the motion base object class |
| MotionSensor | Represents a motion sensor To create or edit an instance of this class, use NXOpen::Motion::MotionSensorBuilder Created in NX6.0.0 |
| MotionSensorBuilder | Represents a NXOpen::Motion::MotionSensorBuilder To create a new instance of this class, use NXOpen::Motion::MotionSensorCollection::CreateMotionSensorBuilder Default values |
| MotionSensorCollection | Represents a collection of sensor objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MotionSession | Represents motion session To obtain an instance of this class, refer to NXOpen::Session Created in NX5.0.0 |
| MotionSimulation | Represents Motion.Simulation To obtain an instance of this class, refer to NXOpen::Session Created in NX5.0.0 |
| MotionSolution | Represents a solution To create or edit an instance of this class, use NXOpen::Motion::MotionSolutionBuilder Created in NX5.0.0 |
| MotionSolutionBuilder | Represents a NXOpen::Motion::MotionSolutionBuilder To create a new instance of this class, use NXOpen::Motion::MotionSolutionCollection::CreateSolutionBuilder Created in NX5.0.0 |
| MotionSolutionCollection | Represents a collection of Driver objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Motor | Represents a motion motor base object class This is an abstract class, and cannot be created |
| MotorBuilder | This builder class is used to create or edit NXOpen::Motion::Motor This is an abstract class, and cannot be created |
| NormalModeProperty | Represents the properties of one normal mode Created in NX7.5.0 |
| OutputPortAssociation | Represents a Motion::OutputPortAssociation |
| OutputPortAssociationList | Represents a list of objects |
| Packaging | This class is an abstract class and base class for NXOpen::Motion::PackagingMeasure , NXOpen::Motion::PackagingTrace and NXOpen::Motion::PackagingInterference objects |
| PackagingBuilder | This class an abstract class and base class for NXOpen::Motion::PackagingMeasureBuilder , NXOpen::Motion::PackagingTraceBuilder and NXOpen::Motion::PackagingInterferenceBuilder |
| PackagingCollection | Represents a collection of Packaging objects To obtain an instance of this class, refer to NXOpen::Part Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PackagingInterference | This class represents a Packaging Interference object |
| PackagingInterferenceBuilder | This the builder class to create or edit an Interference object |
| PackagingMeasure | This class represents a Packaging Measure object |
| PackagingMeasureBuilder | This is the builder class to create or edit a Measure object |
| GeometryData | Represents geometry data |
| PackagingTrace | This class represents a Packaging Trace object |
| PackagingTraceBuilder | This is the builder class to create or edit a Trace object |
| PhysicsConversionBuilder | Represents a NXOpen::Motion::PhysicsConversionBuilder builder To create a new instance of this class, use NXOpen::Motion::MotionSession::CreatePhysicsConversionBuilder Created in NX8.0.0 |
| PlantInput | Represents a Plant Input motion object To create or edit an instance of this class, use NXOpen::Motion::PlantInputBuilder Created in NX6.0.0 |
| PlantInputBuilder | Represents a NXOpen::Motion::PlantInput builder To create a new instance of this class, use NXOpen::Motion::PlantInputCollection::CreatePlantInputBuilder Created in NX6.0.0 |
| PlantInputCollection | Represents a collection of Plant Input objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PlantOutput | Represents a Plant Output motion object To create or edit an instance of this class, use NXOpen::Motion::PlantOutputBuilder Created in NX6.0.0 |
| PlantOutputBuilder | Represents a NXOpen::Motion::PlantOutput builder To create a new instance of this class, use NXOpen::Motion::PlantOutputCollection::CreatePlantOutputBuilder Created in NX6.0.0 |
| PlantOutputCollection | Represents a collection of Plant Output objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PMDCMotor | Represents a motion pmdc motor object To create or edit an instance of this class, use NXOpen::Motion::PMDCMotorBuilder Created in NX6.0.0 |
| PMDCMotorBuilder | Represents a NXOpen::Motion::PMDCMotorBuilder To create a new instance of this class, use NXOpen::Motion::PMDCMotorCollection::CreatePmdcMotorBuilder Created in NX6.0.0 |
| PMDCMotorCollection | Represents a collection of motion pmdc motor To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PointOnCurve | Represents a point on curve To create or edit an instance of this class, use NXOpen::Motion::PointOnCurveBuilder Created in NX6.0.0 |
| PointOnCurveBuilder | Represents a NXOpen::Motion::PointOnCurveBuilder To create a new instance of this class, use NXOpen::Motion::PointOnCurveCollection::CreatePointOnCurveBuilder Default values |
| PointOnCurveCollection | Represents a collection of point on curve objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PointOnSurface | Represents a point on surface motion object To create or edit an instance of this class, use NXOpen::Motion::PointOnSurfaceBuilder Created in NX6.0.0 |
| PointOnSurfaceBuilder | Represents a NXOpen::Motion::PointOnSurfaceBuilder To create a new instance of this class, use NXOpen::Motion::PointOnSurfaceCollection::CreatePointOnSurfaceBuilder Created in NX6.0.0 |
| PointOnSurfaceCollection | Represents a collection of Point on Surface objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PortAssociation | Represents a Motion::PortAssociation |
| PortVariable | Represents a Motion::PortVariable |
| PortVariableCollection | Represents a collection of ports used to expose results on Mechatronics port variables To obtain an instance of this class, refer to NXOpen::Motion::Mechatronics Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PortVariableList | Represents a list of objects |
| PostControl | Represent abstract class Motion.PostControl This is an abstract class, and cannot be instantiated |
| PostProcess | Represents the motion post process To obtain an instance of this class, refer to NXOpen::Motion::MotionSession Created in NX7.5.0 |
| EnvelopeTolerance | Contains settings for envelope tolerance |
| PostToolsControl | Represent abstract class Motion.PostToolsControl An instance of this class can not be obtained Created in NX11.0.0 |
| ProfileBuilder | Represents a builder class for creating and editing an NXOpen::Fields::Field |
| RecurdynSolverProperty | Represents a NXOpen::Motion::RecurdynSolverProperty Created in NX5.0.0 |
| ResultMeasure | Represents a result measure motion object To create or edit an instance of this class, use NXOpen::Motion::ResultMeasureBuilder Created in NX11.0.0 |
| ResultMeasureBuilder | Represents a NXOpen::Motion::ResultMeasure builder To create a new instance of this class, use NXOpen::Motion::ResultMeasureCollection::CreateResultMeasureBuilder Created in NX11.0.0 |
| ResultMeasureCollection | Represents a collection of result measure objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Road | Represents a road To create or edit an instance of this class, use NXOpen::Motion::RoadBuilder Created in NX11.0.0 |
| RoadBuilder | Represents a NXOpen::Motion::RoadBuilder To create a new instance of this class, use NXOpen::Motion::RoadCollection::CreateRoadBuilder Created in NX11.0.0 |
| RoadCollection | Represents a collection of Road objects |
| iterator | Iterator for accessing the contents of the collection |
| ScalarForce | Represents the Motion ScalarForce class |
| ScalarForceBuilder | Represents a builder class for creating and editing an NXOpen::Motion::ScalarForce |
| ScalarForceCollection | Represents a Scalar Force Collection |
| iterator | Iterator for accessing the contents of the collection |
| ScalarTorque | Represents the Motion ScalarTorque class |
| ScalarTorqueBuilder | Represents a NXOpen::Motion::ScalarTorqueBuilder To create a new instance of this class, use NXOpen::Motion::ScalarTorqueCollection::CreateScalarTorqueBuilder Created in NX6.0.0 |
| ScalarTorqueCollection | Represents a collection of motion scalar torque To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Segment | Represents a segment, only creation is supported This is created by road |
| SegmentBuilder | Represents a NXOpen::Motion::SegmentBuilder , only creation is supported To create a new instance of this class, use NXOpen::Motion::RoadBuilder::CreateSegmentBuilder Created in NX11.0.0 |
| SegmentBuilderList | Represents a list of objects |
| SegmentCollection | Represents a collection of Segment objects, only creation is supported To obtain an instance of this class, refer to NXOpen::Motion::Road Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SelectAnalyticalContactProperty | Represents a single object selection |
| SelectBaseSection | Represents a single object selection |
| SelectControlPort | Represents a single object selection |
| SelectFieldData | Represents a single object selection |
| SelectFlexBody | Represents a single object selection |
| SelectJoint | Represents a single object selection |
| SelectLink | Represents a single object selection |
| SelectMarker | Represents a single object selection |
| SelectRoad | Represents a single object selection |
| SelectSplineBeamProperty | Represents a single object selection |
| SelectTirePropertyBasic | Represents a single object selection |
| SelectTirePropertyCd | Represents a single object selection |
| SelectTirePropertyFt | Represents a single object selection |
| SelectTirePropertyMFTyreAndMFSwift | Represents a single object selection |
| SelectTirePropertyMotorcycle | Represents a single object selection |
| SelectTirePropertyNonInertial | Represents a single object selection |
| SignalChart | Represents a motion Signal Chart object To create or edit an instance of this class, use NXOpen::Motion::SignalChartBuilder Created in NX6.0.0 |
| SignalChartBuilder | Represents a NXOpen::Motion::SignalChartBuilder To create a new instance of this class, use NXOpen::Motion::SignalChartCollection::CreateSignalChartBuilder Created in NX6.0.0 |
| SignalChartCollection | Represents a collection of motion Signal Chart To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SignalChartListItem | Represents a SignalChartListItem, List Item inside a SignalChartBuilder To create a new instance of this class, use NXOpen::Motion::SignalChartCollection::CreateSignalChartListItem Created in NX6.0.0 |
| SignalChartListItemList | Represents a list of objects |
| SplineBeam | Represents a SplineBeam To create or edit an instance of this class, use NXOpen::Motion::SplineBeamBuilder Created in NX12.0.0 |
| SplineBeamBuilder | Represents a Motion::SplineBeamBuilder builder To create a new instance of this class, use NXOpen::Motion::SplineBeamCollection::CreateSplineBeamBuilder Default values |
| SplineBeamCollection | Represents a collection of SplineBeams To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SplineBeamProperty | Represents a SplineBeam Property To create or edit an instance of this class, use NXOpen::Motion::SplineBeamPropertyBuilder Created in NX12.0.0 |
| SplineBeamPropertyBuilder | Represents a Motion::SplineBeamPropertyBuilder builder To create a new instance of this class, use NXOpen::Motion::SplineBeamPropertyCollection::CreateSplineBeamPropertyBuilder Default values |
| SplineBeamPropertyCollection | Represents a collection of SplineBeamProperty To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SpreadsheetRunControl | Represents the NXOpen::Motion::SpreadsheetRunControl An instance of this class can not be obtained Created in NX9.0.0 |
| Spring | Represents a spring To create or edit an instance of this class, use NXOpen::Motion::SpringBuilder Created in NX6.0.0 |
| SpringBuilder | Represents a SpringBuilder To create a new instance of this class, use NXOpen::Motion::SpringCollection::CreateSpringBuilder Default values |
| SpringCollection | Represents a collection of motion spring To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| StandardSection | Represents a standard beam section To create or edit an instance of this class, use NXOpen::Motion::StandardSectionBuilder Created in NX12.0.0 |
| StandardSectionBuilder | Represents a Motion::StandardSectionBuilder |
| SubmechanismPositioner | Represents a Submechanism Positioner object |
| SubmechanismPositionerBuilder | Represents a Motion::SubmechanismPositioner builder To create a new instance of this class, use NXOpen::Motion::SubmechanismPositionerCollection::CreatePositionerBuilder Created in NX12.0.0 |
| SubmechanismPositionerCollection | Represents a collection of Submechanmism Positioner objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TextBasedElement | Represents a Motion::TextBasedElement |
| TextBasedElementBuilder | Represents a NXOpen::Motion::TextBasedElementBuilder builder To create a new instance of this class, use NXOpen::Motion::TextBasedElementCollection::CreateTextBasedElementBuilder Created in NX12.0.0 |
| TextBasedElementCollection | Represents a collection of Text Based Element objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX12.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Tire | Tire Motion element |
| TireBuilder | Represents a Motion::Tire builder To create a new instance of this class, use NXOpen::Motion::TireCollection::CreateTireBuilder Default values |
| TireCollection | Represents a collection of motion tire elements To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TireProperty | Tire Property element |
| TirePropertyAdvancedParameters | Represents a TirePropertyAdvancedParameters builder Created in NX11.0.0 |
| TirePropertyBasic | Basic Tire Property element |
| TirePropertyBasicBuilder | Represents a builder for a Motion::TirePropertyBasic To create a new instance of this class, use NXOpen::Motion::TirePropertyBasicCollection::CreateTirePropertyBasicBuilder Default values |
| TirePropertyBasicCollection | Represents a collection of NXOpen::Motion::TirePropertyBasic elements To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TirePropertyBasicParameters | Represents a TirePropertyBasicParameters builder Created in NX11.0.0 |
| TirePropertyBuilder | Represents a Builder base class for Tire Properties This is an abstract class, and cannot be created |
| TirePropertyCd | CDTIRE Tire Property This is an object that contains parameters needed for the CDTIRE Tire model To create or edit an instance of this class, use NXOpen::Motion::TirePropertyCdBuilder Created in NX11.0.0 |
| TirePropertyCdBuilder | Represents a Motion::TirePropertyCd builder To create a new instance of this class, use NXOpen::Motion::TirePropertyCdCollection::CreateTirePropertyCdBuilder Default values |
| TirePropertyCdCollection | Represents a collection of Motion CDTire Tire Property elements To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TirePropertyFt | FTire Tire Property element This is an object that contains parameters needed for the FTire Tire model To create or edit an instance of this class, use NXOpen::Motion::TirePropertyFtBuilder Created in NX11.0.0 |
| TirePropertyFtBuilder | Represents a Builder for Motion Ftire Tire Property To create a new instance of this class, use NXOpen::Motion::TirePropertyFtCollection::CreateTirePropertyFtBuilder Default values |
| TirePropertyFtCollection | Represents a collection of Motion FTire Tire Property elements To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TirePropertyHighOrderParameters | Represents a Tire Property builder for the High Order parameters used in Motorcycle and Basic properties |
| TirePropertyMFTyreAndMFSwift | MF-Tyre and MF-Swift Tire Property element |
| TirePropertyMFTyreAndMFSwiftBuilder | Represents a Builder for Motion MF-Tyre and MF-Swift Tire Property |
| TirePropertyMFTyreAndMFSwiftCollection | Represents a collection of Motion MF-Tyre and MF-Swift Tire Property elements |
| iterator | Iterator for accessing the contents of the collection |
| TirePropertyMotorcycle | Motorcycle Tire Property element |
| TirePropertyMotorcycleBuilder | Represents a TirePropertyMotorcycleBuilder builder To create a new instance of this class, use NXOpen::Motion::TirePropertyMotorcycleCollection::CreateTirePropertyMotorcycleBuilder Default values |
| TirePropertyMotorcycleCollection | Represents a collection of Motion Motorcycle Tire Property elements To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TirePropertyNonInertial | NonInertial Tire Property element |
| TirePropertyNonInertialBuilder | Represents a builder for a Non-inertial Tire Property To create a new instance of this class, use NXOpen::Motion::TirePropertyNonInertialCollection::CreateTirePropertyNonInertialBuilder Default values |
| TirePropertyNonInertialCollection | Represents a collection of Motion Non-inertial Tire Property elements To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX11.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| UserDefinedSection | Represents a user defined section function To create or edit an instance of this class, use NXOpen::Motion::UserDefinedSectionBuilder Created in NX12.0.0 |
| UserDefinedSectionBuilder | Represents a Motion::UserDefinedSectionBuilder |
| VectorForce | Represents a vector force To create or edit an instance of this class, use NXOpen::Motion::VectorForceBuilder Created in NX5.0.0 |
| VectorForceBuilder | Represents a NXOpen::Motion::VectorForceBuilder To create a new instance of this class, use NXOpen::Motion::VectorForceCollection::CreateVectorForceBuilder Created in NX5.0.0 |
| VectorForceCollection | Represents a collection of vector force objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| VectorTorque | Represents a vector torque To create or edit an instance of this class, use NXOpen::Motion::VectorTorqueBuilder Created in NX5.0.0 |
| VectorTorqueBuilder | Represents a NXOpen::Motion::VectorTorqueBuilder To create a new instance of this class, use NXOpen::Motion::VectorTorqueCollection::CreateVectorTorqueBuilder Created in NX5.0.0 |
| VectorTorqueCollection | Represents a collection of vector torque objects To obtain an instance of this class, refer to NXOpen::Motion::MotionManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| VObject | Represents a VObject |
| Newapp | |
| ApplicationManager | Represents the Application Manager class |
| OpenXml | Provide classes and interfaces for OpenXml |
| DocumentData | Represents the definition of the base document data Created in NX11.0.0 |
| DocumentDataGroup | Contains methods for adding document data for CAE Report |
| ImageDocumentData | Represents the image to be exported to the speific Open XML file |
| ImageGroupDocumentData | Represents the group of images to be exported to the speific Open XML file |
| TableCellData | Represents the table cell to be exported to the speific Open XML file |
| TableDocumentData | Represents the table to be exported to the speific Open XML file |
| TextDocumentData | Represents the text to be exported to the speific Open XML file |
| Optimization | Provides classes and interfaces for Optimization |
| DesignStudyAttributeBuilder | Represents a NXOpen::Optimization::DesignStudyAttributeBuilder To create a new instance of this class, use NXOpen::Optimization::DesignStudyCollection::CreateDesignStudyAttributeBuilder Created in NX6.0.0 |
| DesignStudyBuilder | Represents a NXOpen::Optimization::DesignStudyBuilder To create a new instance of this class, use NXOpen::Optimization::DesignStudyCollection::CreateDesignStudyBuilder Created in NX6.0.0 |
| DesignStudyObjective | Defined Objective Structure |
| DesignStudyVariable | Defined variable structure |
| DesignStudyCollection | Represents a NXOpen::Optimization::DesignStudyCollection To obtain an instance of this class, refer to NXOpen::BasePart Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MapleExpBuilder | Represents a NXOpen::Optimization::MapleExpBuilder To create a new instance of this class, use NXOpen::Optimization::OptimizationCollection::CreateMapleExpBuilder |
| MathIntegrationExpBuilder | Represents a NXOpen::Optimization::MathIntegrationExpBuilder To create a new instance of this class, use NXOpen::Optimization::OptimizationCollection::CreateMathIntegrationExpBuilder Created in NX12.0.0 |
| OptimizationAttributeBuilder | Represents a NXOpen::Optimization::OptimizationAttributeBuilder To create a new instance of this class, use NXOpen::Optimization::OptimizationCollection::CreateOptimizationAttributeBuilder Created in NX6.0.0 |
| OptimizationBuilder | Represents a NXOpen::Optimization::OptimizationBuilder To create a new instance of this class, use NXOpen::Optimization::OptimizationCollection::CreateOptimizationBuilder Created in NX6.0.0 |
| OptimizationConstraint | Defined constraint structure |
| OptimizationObjective | Defined Objective Structure |
| OptimizationVariable | Defined variable structure |
| OptimizationCollection | Represents a NXOpen::Optimization::OptimizationCollection To obtain an instance of this class, refer to NXOpen::BasePart Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Options | Provides classes and interfaces for options |
| ChangeList | Records changes to option values at the specified level |
| DraftingStandardChangeList | Records changes to option values at the specified level |
| OptionsManager | Manages options |
| PartFamily | Provides classes and interfaces for Part Family |
| FamilyAttribute | This class represents a part family attribute Use PartFamily::TemplateManager::GetPartFamilyAttribute to get an instance of this class |
| Instance | Represents an instance of a part family member Use NXOpen::Part::GetFamilyInstance to get the instance of this class |
| InstanceDefinition | This class repesents a part family table record (or instance definition on the template) and is created/deleted by PartFamily::TemplateManager |
| InstanceSelectionCriteria | Represents the selection criteria of a part family instance Use NXOpen::Assemblies::Component::CreateEmptyPartFamilyInstanceSelectionCriteria to get an instance of this class |
| MemberIdentifier | This class represents the unique identifier for a part family member |
| Template | This class represents a part family template Use PartFamily::TemplateManager::CreatePartFamily to get the instance of this class |
| TemplateManager | This class serves as the manager for all the part family related operations |
| PDM | Provides classes and interfaces for PDM |
| SaveManagement | Provides classes and interfaces for SaveManagement |
| SaveCallbackData | JA interface for SaveCallbackData object This cannot be created Created in NX12.0.1 |
| SaveObserver | This class is responsible for invoking registered callbacks at different stages in the save operation |
| iterator | Iterator for accessing the contents of the collection |
| AlternateIdManager | This class is responsible for setting and getting NX Manager database attribute |
| AlternateIdsData | Contains alternate Ids data |
| AssignAlternateRevData | Contains alternate Revision Id data |
| AttributeGroup | Represents an attribute group |
| AttributeGroupCollection | Represents a collection of attribute group objects |
| iterator | Iterator for accessing the contents of the collection |
| AttributeGroupDescription | Represents an attribute group type |
| AttributeGroupDescriptionCollection | Represents a collection of attribute group description objects |
| iterator | Iterator for accessing the contents of the collection |
| AttributeGroupReviseBuilder | Represents an attribute group revise builder |
| CaeCloneManager | This class is used for executing CAE Clone on a Simulation File or a FeModel File |
| CAEFileContainer | This class is a File Container class for uploading JT files created by NX CAE Post Processing to Teamcenter |
| ConditionalElementRevision | Represents a base class that provides common methods for various conditional model elements in a NXOpen::CollaborativeDesign |
| ConfigurationContextBuilder | Represents a NXOpen::PDM::ConfigurationContextBuilder builder To create a new instance of this class, use NXOpen::PDM::ConfigurationManager::CreateConfigurationContextBuilder Created in NX9.0.0 |
| ConfigurationManager | Represents Configuration Manager Use NXOpen::Session::ConfigurationManager to get the instance of this class |
| ConnectionElementRevision | Represents a base class that provides common methods for various model elements in a NXOpen::CollaborativeDesign |
| CrossSheetReference | Represents a base class that provides common methods for various model elements in a NXOpen::CollaborativeDesign |
| CustomWebAppMenuHandler | Represents Custom WebApp Menu Handler class Created in NX11.0.0 |
| DatabaseAttributeManager | This class is responsible for setting and getting NX Manager database attribute |
| DatabaseObject | Represents a Teamcenter database object Created in NX11.0.0 |
| DatabaseObjectManager | This class is used for retrieving PDM database objects |
| DatabaseObjects | Represents a collection of NXOpen::PDM::DatabaseObject |
| DBEntityProxy | JA class for the DBEntityProxy object This is an abstract class, and cannot be instantiated |
| DBEntityProxyCollection | Represents a collection of NXOpen::PDM::DBEntityProxy objects To obtain an instance of this class, refer to NXOpen::Part Created in NX11.0.1 |
| iterator | Iterator for accessing the contents of the collection |
| DesignElementRevision | Represents the design element revision in the database |
| DesignFeatureRevision | Represents the design feature revision in the database |
| DesignSubordinateRevision | Represents the design subordinate revision in the database |
| EffectivityAttributePropertiesBuilder | Represents an NXOpen::PDM::EffectivityAttributePropertiesBuilder to be used for creating effectivity attributes |
| EffectivityTableBuilder | Represents a builder class for effectivity configuration |
| EffectivityTableRow | Represents the class that contains effectivity parameters |
| ElementGroup | Represents a base class that provides common methods for various model elements in a NXOpen::CollaborativeDesign |
| ErrorMessageHandler | Represents the class that contains ErrorObjects and Failed Logical Objects |
| ExportWorksetForReferenceBuilder | Represents a builder class that performs Create operations To create a new instance of this class, use NXOpen::PDM::PdmSession::CreateExportWorksetForReferenceBuilder Created in NX10.0.0 |
| ExternalFileReferenceListBuilder | Represents a builder class To create a new instance of this class, use NXOpen::PDM::PdmSession::CreateExternalFileReferenceListBuilder Created in NX10.0.0 |
| FileManagement | This class is responsible for Teamcenter file management related activities |
| FindCriteria | Represents find criteria objects Created in NX11.0.0 |
| GenericObjectAttributeHolder | Represents the class that contains database business logic or pre-creation information for the objects |
| IAttributeGroupOwner | An interface class for objects that own attribute groups |
| ListOfValues | Represents list of values to be used in search query Created in NX6.0.0 |
| LogicalElementRevision | Represents a base class that provides common methods for various model elements in a NXOpen::CollaborativeDesign |
| LogicalObject | Represents the class that contains database business logic or pre-creation information for the objects |
| ModelElement | Represents a base class that provides common methods for various model elements in a NXOpen::CollaborativeDesign |
| ModelElementRevision | Represents a base class that provides common methods for various model elements in a NXOpen::CollaborativeDesign |
| NativePartLogicalObject | Represents the class that contains information for the objects participating in import operation |
| NonMasterData | Represents a class that performs various operations on NonMaster Datasets Created in NX11.0.0 |
| ObjectCreateBuilder | Represents a builder class that perofrms create operation To create a new instance of this class, use NXOpen::PDM::PdmSession::CreateObjectCreateBuilder Created in NX10.0.0 |
| OperationErrors | Represents Operation Errors to be returned in TCIN related operations Created in NX8.5.0 |
| OrderedElementGroup | Represents a base class that provides common methods for ordered elements group in a NXOpen::PDM::ElementGroup |
| PartBuilder | This class serves as the base class for NX Manager part builders |
| PartFileNameData | Contains part file name information |
| PartNumberData | Contains part number information |
| PartRevisionData | Contains part revision information |
| PartCreationObject | This class is a proxy for a to-be-created part prior to the part being created |
| PartCreationObjectAttributePropertiesBuilder | Represents an NXOpen::PDM::PartCreationObjectAttributePropertiesBuilder |
| PartFromPartBuilder | This class provides the methods necessary to create a new part in NX Manager from an existing part |
| PartFromTemplateBuilder | This class provides the methods necessary to create a new part in NX Manager from a template part |
| PartManager | This class contains methods to create and manage parts in NX Manager mode |
| PartOperationAttributePropertiesBuilder | Represents an NXOpen::PDM::PartOperationAttributePropertiesBuilder to be used for creating attributes in part operation |
| PartOperationBuilder | Represents a builder class that performs various design element operations |
| PartOperationCopyBuilder | Represents a builder class that performs various Save As operations |
| PartOperationCreateBuilder | Represents a builder class that performs Create operations To create a new instance of this class, use NXOpen::PDM::PdmSession::CreateCreateOperationBuilder Created in NX10.0.0 |
| PartOperationImportBuilder | Represents a builder class that performs Create operations To create a new instance of this class, use NXOpen::PDM::PdmSession::CreateImportOperationBuilder Default values |
| PartOperationImportCallbackData | JA interface for PartOperationImportCallbackData object This cannot be created Created in NX10.0.0 |
| PartOperationImportObserver | This class is responsible for invoking registered callbacks at different stages in import operation |
| iterator | Iterator for accessing the contents of the collection |
| PartOperationMakeUniqueBuilder | Represents a NXOpen::PDM::PartOperationMakeUniqueBuilder builder To create a new instance of this class, use NXOpen::PDM::PdmSession::CreateMakeUniqueOperationBuilder Created in NX10.0.0 |
| PartOperationValidationPropertiesBuilder | Represents an NXOpen::PDM::PartOperationValidationPropertiesBuilder to be used for overriding the default validation parameters for a part in import operation |
| PdmFile | Contains methods for accessing PDM file data |
| PdmNavigatorNode | Represents a PdmNavigatorNode Created in NX6.0.4 |
| PdmPart | This class serves as a gateway to part-specific tools for NX Manager mode |
| CheckinInput | Reservation check-in input struct |
| CheckoutInput | Reservation check-out input struct |
| PdmSearch | Represents search query Created in NX6.0.0 |
| PdmSearchManager | Represents search manager class Use NXOpen::Session::PdmSearchManager to get the instance of this class |
| PdmSession | Represents the NX Manager session To obtain an instance of this class, refer to NXOpen::Session Created in NX7.5.0 |
| PendingComponentsManager | This class is used for managing a part's pending components, that is, those that have been added within Teamcenter but are not yet present in NX |
| PersistentSettings | Persistently held settings for a Teamcenter user account |
| PortArtifact | Represents a base class that provides common methods for port artifact in a NXOpen::PDM::LogicalElementRevision |
| RequirementUtils | Collection of PDM utility methods To obtain an instance of this class, refer to NXOpen::Session Created in NX6.0.3 |
| SaveAsReviseCallbackData | JA interface for SaveAsReviseCallbackData object This cannot be created Created in NX11.0.0 |
| SaveAsReviseObserver | This class is responsible for invoking registered callback when objects goes for SaveAs and Revise and after the process |
| iterator | Iterator for accessing the contents of the collection |
| SearchResult | Represents search query Created in NX6.0.0 |
| SessionSettings | Values for the settings that affect the current Teamcenter session |
| SheetRevision | Represents a base class that provides common methods for various model elements in a NXOpen::CollaborativeDesign |
| SmartSaveBuilder | TODO: Add a documentation comment describing this class |
| SmartSaveContext | Represents smart save context To create a new instance of this class, use NXOpen::PDM::PdmSession::CreateSmartSaveContext Created in NX11.0.1 |
| SmartSaveObject | Represents the class for object participating in the smart save operation |
| SoaConnectionHandle | This class cannot be instantiated |
| SoaQuery | Represents search soa query to perform Teamcenter search Created in NX6.0.0 |
| TcinUtils | Contains various TCIN utility methods To obtain an instance of this class, refer to NXOpen::PDM::PdmSession Created in NX11.0.1 |
| TracelinkQuery | Represents the Trace link query To obtain an instance of this class use NXOpen::PDM::RequirementUtils Created in NX6.0.3 |
| VariantConfigurationBuilder | Represents a builder class that performs variant rule configuration |
| WebAppSession | Represents the Web App session To obtain an instance of this class, refer to NXOpen::Session Created in NX11.0.0 |
| PhysMat | Provides classes and interfaces for Physical Material |
| PhysicalMaterialAssignBuilder | Represents a Physical Material Assign Builder To create a new instance of this class, use NXOpen::PhysicalMaterialCollection::CreateMaterialAssignBuilder Created in NX6.0.0 |
| PhysicalMaterialLibMgrBuilder | Represents a NXOpen::PhysMat::PhysicalMaterialLibMgrBuilder builder To create a new instance of this class, use NXOpen::PhysicalMaterialCollection::CreateMaterialLibmgrBuilder Created in NX6.0.0 |
| PhysicalMaterialListBuilder | This builder is used by the Materials list component that allows copying, editing, deleting |
| PID | Provides classes and interfaces for PID |
| AutomaticTable | Automatic table for PID objects |
| AutomaticTableBuilder | Represents a AutomaticTableBuilder |
| AutomaticTableCollection | Represents a collection of AutomaticTable |
| iterator | Iterator for accessing the contents of the collection |
| BulkEditBuilder | Represents a BulkEditBuilder to edit bulk of objects |
| DesignContextBuilder | Represents a builder class that performs PID Design Context operations |
| Equipment | Represents the equipment class |
| EquipmentBuilder | Builder used to model a piece of Equipment |
| FileNewApplicationBuilder | Represents a builder class that performs Generic File New operations |
| FlowDirectionArrow | A symbol that indicates the direction the of the flow |
| FlowDirectionArrowBuilder | Represents FlowDirectionArrowBuilder |
| FlowDirectionArrowCollection | Represents a collection of FlowDirectionArrow |
| iterator | Iterator for accessing the contents of the collection |
| Instrumentation | Represents the Instrumentation class |
| InstrumentationBuilder | Represents a PID::InstrumentationSymbol and PID::Instrumentation builder To create a new instance of this class, use NXOpen::PID::PidManager::CreateInstrumentationBuilder Default values |
| InstrumentationCollection | Represents a collection of Instrumentation |
| iterator | Iterator for accessing the contents of the collection |
| InstrumentationSymbol | Represents the InstrumentationSymbol class |
| LibraryAuthoringBuilder | Represents a LibraryAuthoringBuilder |
| OffSheetConnector | Represents the off sheet connector class |
| OffSheetConnectorBuilder | Builder used to model a piece of Off Sheet Connector |
| PidManager | A manager to deal with all objects |
| Pipe | Represents the Pipe class |
| PipeBuilder | Represents a PipeBuilder |
| Port | Represents the port class |
| PortEquipment | Represents the PortEquipment class |
| PortEquipmentBuilder | Builder used to model a piece of PortEquipment |
| PreferencesAnnotationBuilder | Represents a PreferencesAnnotationBuilder |
| PreferencesBuilder | Represents a PreferencesBuilder To create a new instance of this class, use NXOpen::PID::PidManager::CreatePreferencesBuilder Created in NX11.0.1 |
| PreferencesConnectionBuilder | Represents a PreferencesConnectionBuilder |
| PreferencesGeneralBuilder | Represents a PreferencesGeneralBuilder |
| PreferencesInstrumentationBuilder | Represents a PreferencesInstrumentationBuilder |
| PreferencesOffSheetConnectorBuilder | Represents a PreferencesOffSheetConnectorBuilder |
| PropertyCellRangeBuilder | Represents a PropertyCellRangeBuilder |
| Sheet | Represents a base class that provides common methods for various model elements in a NXOpen::CollaborativeDesign |
| SheetTemplateBuilder | Represents a NXOpen::PID::SheetTemplateBuilder builder, and the builder is used to model a sheet template |
| Placement | Provides classes and interfaces for Placement |
| PlacementEngineBuilder | Represents a builder class that will create and work with placement solutions |
| PlacementSolution | This class represents the placement solution Use Placement::PlacementEngineBuilder::ComputePlacementSolutions to get the instance of this class |
| PLAS | Provides classes and interfaces for PLAS |
| ControlLoop | Represents the ControlLoop class |
| ControlLoopBuilder | Represents a ControlLoopBuilder |
| PlasManager | A manager to deal with all objects |
| Run | Represents the Run class |
| RunBuilder | Represents a RunBuilder |
| Positioning | Provides classes and interfaces for Assembly Positioning and Constraints |
| ComponentConstraint | Constraint for use in positioning assembly objects in NX |
| ComponentConstraintGroup | Constraint group which represents a group of component constraints in NX |
| ComponentConstraintGroupBuilder | Represents a NXOpen::Positioning::ComponentConstraintGroupBuilder builder To create a new instance of this class, use NXOpen::Assemblies::ComponentAssembly::CreateConstraintGroupBuilder Default values |
| ComponentNetwork | Network for use in positioning components in NX |
| ComponentPositioner | An instance of this class can be used to create NXOpen::Positioning::Constraint s and associated objects |
| Constraint | Constraints for use in positioning objects in NX |
| ConstraintCollection | Collection of constraints To obtain an instance of this class, refer to NXOpen::Positioning::Positioner Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ConstraintReference | ConstraintReference for use in positioning objects in NX |
| DisplayedConstraint | The displayed representation of a constraint, used for graphical display and to represent it in the Assembly Navigator |
| DisplayedConstraintCollection | Collection of displayed constraints To obtain an instance of this class, refer to NXOpen::Part Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| MatingConverter | An instance of this class can be used to convert Mating Conditions to Assembly Constraints in its owning assembly or in child parts of its owning assembly |
| Network | Network for use in positioning objects in NX |
| Positioner | An instance of this class can be used to create NXOpen::Positioning::Constraint s and associated objects |
| Preferences | Provides classes and interfaces for preferences |
| AnnotationPreferences | Represents the global preferences for annotations To obtain an instance of this class, refer to NXOpen::Annotations::AnnotationManager Created in NX3.0.0 |
| BaseViewPreferences | Represents set of Base View Preferences applicable to drafting views |
| DetailViewPreferences | Represents set of Detail View Preferences applicable to drafting views |
| DraftingPreferenceManager | Represents a collection of pmi preference builders |
| FlatPatternViewPreferences | Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings |
| GeneralViewPreferences | Represents set of General View Preferencess applicable to drafting views |
| HiddenLinesViewPreferences | Represents set of Hidden Lines View Preferences applicable to drafting views |
| IBaseViewPreferences | Represents set of IBaseViewPreferences applicable to drafting views |
| IDetailViewPreferences | Represents set of Detail ViewPreferences applicable to drafting views |
| IGeneralViewPreferences | Represents set of General View Styles applicable to drafting views |
| IHiddenLinesViewPreferences | Represents set of HiddenLinesViewStyle applicable to drafting views |
| InheritPmiPreferences | Represents set of InheritPmiPreferences applicable to drafting views |
| IOrientationViewPreferences | Represents set of IOrientationViewPreferences applicable to drafting views |
| IPerspectiveViewPreferences | Represents set of PerspectiveViewPreferences applicable to drafting views |
| IProjectedViewPreferences | Represents set of ProjectedViewPreferences applicable to drafting views |
| ISectionViewPreferences | Represents set of SectionViewPreferences applicable to drafting views |
| IShadingViewPreferences | Represents set of Shading ViewPreferences applicable to drafting views |
| ISmoothEdgesViewPreferences | Represents set of SmoothEdgesViewPreferences applicable to drafting views |
| IThreadsViewPreferences | Represents set of ThreadsViewPreferences applicable to drafting views |
| ITraceLinesViewPreferences | Represents interface for TraceLinesViewPreferences applicable to drafting views |
| IVirtualIntersectionsViewPreferences | Represents set of Virtual Intersections View Preferences applicable to drafting views |
| IVisibleLinesViewPreferences | Represents set of VisibleLinesViewPreferences applicable to drafting views |
| LoadDraftingStandardBuilder | Represents a NXOpen::Preferences::LoadDraftingStandardBuilder To create a new instance of this class, use NXOpen::Preferences::DraftingPreferenceManager::CreateLoadDraftingStandardBuilder Created in NX5.0.0 |
| ObjectPreferences | Captures the UI based calls required for Object Preferences To obtain an instance of this class, refer to NXOpen::UI Created in NX3.0.0 |
| PartAeroSheetmetal | Represents the NX Sheetmetal preferences applicable to part Preferences are in control of the part |
| PartDrafting | Represents the set of drafting preferences applicable to part To obtain an instance of this class, refer to NXOpen::Preferences::PartPreferences Created in NX3.0.0 |
| PartFlexiblePrintedCircuitDesign | Represents the Flexible Printed Circuit Design preferences applicable to part Preferences are in control of the part |
| FlatPatternCalloutTypeDisplay | The members of the following structure are the display data for a callout in a flat pattern drawing member view |
| FlatPatternObjectTypeDisplay | The members of the following structure are the display data for an object in a flat pattern drawing member view |
| PlanarSegmentCurveTypeDisplayData | The members of the following structure are the display data |
| PartModeling | Represents the set of Modeling preferences applicable to part To obtain an instance of this class, refer to NXOpen::Preferences::PartPreferences Created in NX3.0.0 |
| PartObject | Represents the set of object preferences applicable to entire part |
| PartPreferences | Represents set of preferences applicable to displayed part |
| PartSheetmetal | Represents the NX Sheetmetal preferences applicable to part Preferences are in control of the part |
| FlatPatternCalloutTypeDisplay | The members of the following structure are the display data for a callout in a flat pattern drawing member view |
| FlatPatternObjectTypeDisplay | The members of the following structure are the display data for an object in a flat pattern drawing member view |
| TabCurveTypeDisplayData | The members of the following structure are the display data of a tab curve type |
| PartSketch | Represents the set of Sketcher preferences applicable to entire part |
| PartUserInterface | Represents the set of User Interface preferences applicable to entire part |
| PartVisualizationColorSetting | Represents the set of visualization preferences under color setting tab applicable to part To obtain an instance of this class, refer to NXOpen::Preferences::PartPreferences Created in NX3.0.0 |
| PartVisualizationEmphasis | Represents visualization preferences for emphasis that are applicable to the entire part |
| LayersOptions | Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Layers |
| OriginalColorShellOptions | Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Original Color Shell |
| ShellOptions | Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Shell |
| WireframeBlendOptions | Specifies options that control the color-blending effect used to de-emphasize wireframe geometry |
| PartVisualizationLine | Represents the set of visualization preferences under Line tab applicable to part To obtain an instance of this class, refer to NXOpen::Preferences::PartPreferences Created in NX3.0.0 |
| PartVisualizationNamesBorders | Represents the set of visualization preferences of entire Working Part coming under Names/borders Tab To obtain an instance of this class, refer to NXOpen::Preferences::PartPreferences Created in NX3.0.0 |
| PartVisualizationPerformance | Represents the set of visualization performance preferences applicable to entire part |
| PartVisualizationScreen | Represents the set of visualization preferences under screen tab applicable to part To obtain an instance of this class, refer to NXOpen::Preferences::PartPreferences Created in NX12.0.0 |
| PartVisualizationShade | Represents the set of shade visualization preferences applicable to entire part To obtain an instance of this class, refer to NXOpen::Preferences::PartPreferences Created in NX3.0.0 |
| PartVisualizationVisual | Represents the set of visualization preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::PartPreferences Created in NX3.0.0 |
| PostProcessing | CAE Post Processing preferences To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX8.0.1 |
| ProjectedViewPreferences | Represents set of Projected View Preferences applicable to drafting views |
| RoutingApplicationView | All of the various preferences and options available from the Routing Application View file |
| RoutingCharacteristics | Contains all of the various preferences for option and required characteristics |
| RoutingElectrical | The RoutingElectrical object stores a set of route electrical preferences |
| RoutingLogical | The RoutingLogical object stores a set of route logical preferences |
| RoutingMechanical | The RoutingMechanical object stores a set of route mechanical preferences |
| RoutingPart | Contains the preferences related to placing/finding/adding parts and generating the Routing bill of materials |
| RoutingPartLibrary | Represents a Routing Part library |
| Column | Part table column type |
| RoutingPath | The RoutingPath object stores a set of path preferences |
| RoutingPreferences | Represents the set of navigation preferences applicable to entire session |
| RoutingStock | The Preferences for Routing Stock objects |
| RoutingUserPreferences | Allows access to the User Preferences section of the Routing Application View file |
| RulePreferences | Provides methods for manipulating the Knowledge Fusion preferences in a session |
| SectionViewPreferences | Represents set of Section View Preferences applicable to drafting views |
| SessionAssemblies | Represents the set of Assemblies Preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX3.0.0 |
| SessionDrafting | Represents the set of Drafting preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX3.0.0 |
| SessionMeasureRequirements | Represents the two options available on the Measure Requirements toolbar and applicable to the entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX5.0.0 |
| SessionModeling | Represents the set of Modeling preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX3.0.0 |
| SessionNavigation | Represents the set of navigation preferences applicable to entire session |
| SessionNXGateway | Represents the set of NXGateway Preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX3.0.0 |
| SessionPdm | Represents the NX Manager preferences for the entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX4.0.1 |
| SessionPmi | Represents the set of PMI preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX4.0.0 |
| SessionPreferences | Represents a collection of session based preferences |
| SessionSketch | Represents the set of sketch preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX3.0.0 |
| SessionUserInterface | Represents the set of User Interface preferences applicable to entire session |
| SessionUserInterfaceUI | Represents all UI based session user interface preferneces |
| SessionVisualizationColorSetting | Represents the set of visualization preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences |
| SessionVisualizationEmphasis | Represents visualization preferences for emphasis that are applicable to the entire session |
| SessionVisualizationHighEndRendering | Represents the set of visualization preferences under High End Rendering tab applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX11.0.1 |
| SessionVisualizationHighQualityImage | Represents the High Quality Image preferences for the entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX4.0.0 |
| SessionVisualizationPerformance | Represents visualization performance preferences that are applicable to the entire session |
| SessionVisualizationScreen | Represents the set of visualization preferences under screen tab applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX3.0.0 |
| SessionVisualizationShade | Represents the UI related Visualization Shade preferences |
| SessionVisualizationSpecialEffects | Represents the set of visualization special effect preferences applicable to entire session |
| SessionVisualizationVisual | Represents all UI based session Visualization visual preferences To obtain an instance of this class, refer to NXOpen::UI Created in NX3.0.0 |
| SessionWorkPlane | Represents the set of WorkPlane preferences applicable to session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences |
| ShadingViewPreferences | Represents set of Shading View Preferences applicable to drafting views |
| ShipbuildingLinesViewPreferences | Represents set of Shipbuilding Lines View Preferences applicable to drafting views |
| ShipDraftingViewLinesViewPreferences | Represents set of Ship Drafting View Lines View Preferences applicable to drafting views |
| SketchPreferences | Represents the set of sketch preferences applicable on NXOpen::Sketch object To obtain an instance of this class, refer to NXOpen::Sketch Created in NX3.0.0 |
| SmoothEdgesViewPreferences | Represents set of Smooth Edges View Preferences applicable to drafting views |
| SubdivisionModelingPreferences | Represents the set of Modeling preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX9.0.0 |
| TextureModelingPreferences | Represents the set of Texture Modeling preferences applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX1847.0.0 |
| ThreadsViewPreferences | Represents set of Threads View Preferences applicable to drafting views |
| TraceLinesViewPreferences | Represents set of Trace Lines View Preferences applicable to drafting views |
| ViewPreferences | Represents set of style applicable to drafting views |
| ViewSection | Records / queries view section preferences |
| ViewVisualizationSpecialEffects | Represents the set of visualization special effect preferences applicable to entire session |
| ColorHLS | Represents three constituents of a HLS color pattern |
| ColorHSV | Represents three constituents of a HSV color pattern |
| ColorRGB | Represents three constituents of a RGB color pattern |
| FogData | Represents the constituents of fog data |
| ViewVisualizationVisual | Represents the set of View related Visualization visual preferences To obtain an instance of this class, refer to NXOpen::View Created in NX3.0.0 |
| DisplayAppearanceOptions | Describes the rendering style and the appearance of edges and silhouettes in the view |
| SurfaceDisplayOptions | Describes the appearance of edges and silhouettes in the view |
| TrueSurfaceDisplayPref | Represents the various surface display parameters |
| VirtualIntersectionsViewPreferences | Represents set of Virtual Intersections View Preferences applicable to drafting views |
| VisibleLinesViewPreferences | Represents set of Visible Lines View Preferences applicable to drafting views |
| VisualizationFonts | Represents visualization preferences for standard text fonts applicable to the entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX8.0.0 |
| VisualizationHandles | Represents the set of visualization preferences under handles tab applicable to entire session To obtain an instance of this class, refer to NXOpen::Preferences::SessionPreferences Created in NX7.5.0 |
| VisualizationLine | This class is for UI related preferences changes To obtain an instance of this class, refer to NXOpen::UI Created in NX3.0.0 |
| WorkPlane | Represents the set of WorkPlanePreferences preferences applicable to part |
| GridSize | Grid size parameters |
| NonuniformGridSize | Nonuniform grid size parameters |
| PolarGridSize | Polar grid size parameters |
| PressLineSimulation | Provides classes and interfaces for Press Line Simulation |
| ApplicationManager | Represents a manager the of press line simulation application builders |
| ConvertFromDieValidationBuilder | Use this builder to convert a simulation job done in Die Validation to Press Line Simulation |
| CushionControl | Represents a linear cam used in a press line simulation |
| CushionControlBuilder | Represents a PressLineSimulation::CushionControl builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateCushionControlBuilder Default values |
| DrivenCamBuilder | Represents a PressLineSimulation.DrivenCam builder |
| HydraulicLifter | Represents a hydraulic lifter used in a press line simulation |
| HydraulicLifterBuilder | Represents a PressLineSimulation::HydraulicLifterBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateHydraulicLifterBuilder Default values |
| HydraulicLifterBuilderList | Represents a list of objects |
| HydraulicLifterListBuilder | Represents a PressLineSimulation::HydraulicLifterListBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateHydraulicLifterListBuilder Created in NX12.0.0 |
| ImportPartBuilder | Use this class to import press line setup parts, mount, and positions them at the right position |
| LinearCam | Represents a linear cam used in a press line simulation |
| LinearCamBuilder | Represents a PressLineSimulation::LinearCamBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateLinearCamBuilder Default values |
| LinearCamBuilderList | Represents a list of objects |
| LinearCamListBuilder | Represents a PressLineSimulation::LinearCamListBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateLinearCamListBuilder Created in NX12.0.0 |
| MachineAdjustmentBuilder | Use this class to configure the machine adjustment axes of the press model |
| MachineAdjustmentBuilderList | Represents a list of objects |
| MachineAdjustmentBuilderListBuilder | Use this class to obtain a list of PressLineSimulation::MachineAdjustmentBuilder objects |
| MotionCurvesBuilder | Represents a PressLineSimulation::MotionCurvesBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateMotionCurvesBuilder Created in NX12.0.0 |
| MountPoint | Represents a mount point used in a press line simulation |
| MountPointBuilder | Use this class to mount tools, tooling and parts to interfaces |
| MountPointBuilderList | Represents a list of objects |
| MountPointBuilderListBuilder | Use this class to obtain a list of PressLineSimulation::MountPointBuilder objects |
| RotaryCam | Represents a rotary cam used in a press line simulation |
| RotaryCamBuilder | Represents a PressLineSimulation::RotaryCamBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateRotaryCamBuilder Default values |
| RotaryCamBuilderList | Represents a list of objects |
| RotaryCamListBuilder | Represents a PressLineSimulation::RotaryCamListBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateRotaryCamListBuilder Created in NX12.0.0 |
| SetPressModelBuilder | A builder to setup the press model To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateSetPressModelBuilder Created in NX12.0.0 |
| UserMotion | Represents a user defined motion used in a press line simulation |
| UserMotionBuilder | Represents a PressLineSimulation::UserMotionBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateUserMotionBuilder Default values |
| UserMotionBuilderList | Represents a list of objects |
| UserMotionListBuilder | Represents a PressLineSimulation::UserMotionListBuilder builder To create a new instance of this class, use NXOpen::PressLineSimulation::ApplicationManager::CreateUserMotionListBuilder Created in NX12.0.0 |
| Report | Provides classes and interfaces for Report |
| AutomationLogger | Represents the automation logger to log information for report automation program |
| BaseArgument | Represents an abstract command argument |
| BaseItem | Represents an abstract report item |
| Command | Represents a command in command library |
| CommandBuilder | Represents a NXOpen::Report::CommandBuilder |
| CommandImporter | Represents a command importer to import the commands into command libary |
| CommandLibrary | Represents a command library in the command manager |
| CommandManager | Represents the command manager |
| DoubleArgument | Represents an argument for double type data |
| EnumerationArgument | Represents an argument for enumeration type data |
| ImageOption | Represents an image option object |
| ImagesGroupItem | Represents a images group item |
| IntegerArgument | Represents an argument for integer type data |
| IReportCollection | This interface is used to manage associated reports Report::Report Created in NX11.0.0 |
| IUserItem | Represents an user defined report item |
| ProgramInformation | Represents the program information for command automation |
| Report | Represents a report |
| ReportImage | Represents a report image |
| ReportManager | Represents the report manager |
| ReportPreference | Manages the preference data |
| ResultXmlFileWriter | Contains methods for adding document data and generating result XML file for CAE Report |
| StringArgument | Represents an argument for string type data |
| TemplateItem | Represents a template item object |
| TextItem | Represents a text item |
| UserImagesGroupItem | Represents a user images group item |
| UserInput | Represents a user input in command |
| UserTextItem | Represents a user text item |
| Routing | Provides classes and interfaces for Routing |
| Electrical | Provides classes and interfaces for Routing Electrical |
| AssignProxyBuilder | Represents a NXOpen::Routing::Electrical::AssignProxyBuilder |
| CableConnection | Connection used by a NXOpen::Routing::Electrical::CableDevice |
| CableConnectionCollection | Represents a collection of NXOpen::Routing::Electrical::CableConnection objects |
| iterator | Iterator for accessing the contents of the collection |
| CableDefinition | Holds the collection of wires in a NXOpen::Routing::Electrical::CableDevice |
| CableDevice | Corresponds to a cable instance of an NXOpen::Routing::Electrical::ElectricalStockDevice |
| CableStockDefinition | Describes a cable's stock |
| CablewaysBuilder | Represents NXOpen::Routing::Electrical::CablewaysBuilder |
| CablewaysLayoutBuilder | Represents NXOpen::Routing::Electrical::CablewaysLayoutBuilder |
| CablewaysLayoutView | Represents the CablewaysLayoutView class |
| CablewaysLayoutViewCollection | Represents a collection of NXOpen::Routing::Electrical::CablewaysLayoutView objects |
| iterator | Iterator for accessing the contents of the collection |
| Connection | The electrical usage of a NXOpen::Routing::LogicalConnection , restricted to one From and one To terminal |
| ConnectionCollection | Represents a collection of NXOpen::Routing::Electrical::Connection objects |
| iterator | Iterator for accessing the contents of the collection |
| ConnectorDevice | The Electrical ConnectorDevice corresponds to a connector instance of NXOpen::Routing::SingleDevice |
| ConnectorDeviceCollection | Represents a collection of NXOpen::Routing::Electrical::ConnectorDevice (CD) objects |
| iterator | Iterator for accessing the contents of the collection |
| ElectricalDeviceRelationship | Represents a relationship between Routing Electrical devices |
| ElectricalDeviceRelationshipCollection | Represents a collection of NXOpen::Routing::Electrical::ElectricalDeviceRelationship objects |
| iterator | Iterator for accessing the contents of the collection |
| ElectricalFormat | Represents a Routing Electrical ElectricalFormat |
| ElectricalFormatCollection | Represents a Routing NXOpen::Routing::Electrical::ElectricalFormatCollection object |
| iterator | Iterator for accessing the contents of the collection |
| ElectricalNavigatorFilter | Represents a Routing Electrical Navigator Filter object |
| ElectricalNavigatorFilterCollection | Represents a Routing NXOpen::Routing::Electrical::ElectricalNavigatorFilterCollection object |
| iterator | Iterator for accessing the contents of the collection |
| ElectricalPartDefinitionShadow | Represents NXOpen::Routing::Electrical::ElectricalPartDefinitionShadow object Creator not available in KF |
| ElectricalStockDefinition | Represents NXOpen::Routing::Electrical::ElectricalStockDefinition object Creator not available in KF |
| ElectricalStockDevice | The Electrical Stock Device is a non instantiable superclass to classify all electrical stock-based single devices |
| ElectricalStockDeviceCollection | Represents a collection of NXOpen::Routing::Electrical::ElectricalStockDevice (ESD) objects |
| iterator | Iterator for accessing the contents of the collection |
| HarnessDefinition | Represents a NXOpen::Routing::Electrical::HarnessDefinition Creator not available in KF |
| HarnessDevice | The Electrical HarnessDevice corresponds to a harness instance of the Routing::SingleDevice |
| HarnessDeviceCollection | Represents a collection of Routing::Electrical::HarnessDevice objects |
| iterator | Iterator for accessing the contents of the collection |
| JumperConnection | A jumper connection connects ports on the same connector |
| JumperConnectionCollection | A collection of NXOpen::Routing::Electrical::JumperConnection objects |
| iterator | Iterator for accessing the contents of the collection |
| NonPathConnection | Describes a connection that does not have a path |
| NonPathConnectionCollection | A collection of NXOpen::Routing::Electrical::NonPathConnection objects |
| iterator | Iterator for accessing the contents of the collection |
| PathArrangementBuilder | Builder class to manage Path Arrangements |
| PathConnection | Describes a connection that has a path |
| PathConnectionCollection | A collection of NXOpen::Routing::Electrical::PathConnection objects |
| iterator | Iterator for accessing the contents of the collection |
| ShieldDefinition | Represents Routing Electrical ShieldDefinition object Creator not available in KF |
| ShieldDevice | The Electrical ShieldDevice corresponds to a shield instance of Routing::Electrical::ElectricalStockDevice |
| ShieldStockDefinition | Represents Routing Electrical ShieldStockDefinition object Creator not available in KF |
| SortConnectionsPluginData | Data object created by Routing just before routing connections |
| SystemDefinition | Represents a NXOpen::Routing::Electrical::SystemDefinition Creator not available in KF |
| SystemDevice | The Electrical SystemDevice corresponds to a system instance of the NXOpen::Routing::SingleDevice |
| SystemDeviceCollection | Represents a collection of NXOpen::Routing::Electrical::SystemDevice objects |
| iterator | Iterator for accessing the contents of the collection |
| WireDevice | The Electrical WireDevice corresponds to a wire instance of NXOpen::Routing::Electrical::ElectricalStockDevice |
| AddFontBuilder | Builder for creating an add font user interface dialogue To obtain an instance of this class use NXOpen::Routing::AddFontBuilder Created in NX8.5.0 |
| AdoptionBuilder | Represents a NXOpen::Routing::AdoptionBuilder |
| AlignStockBuilder | Represents a Routing::AlignStockBuilder Builder for aligning non-circular stocks |
| Anchor | A Routing Anchor defines a position in a Qualified Routing component part |
| AnchorBuilder | Builder for creating / editing the Anchors |
| AnchorCollection | Represents a collection of NXOpen::Routing::Anchor objects |
| iterator | Iterator for accessing the contents of the collection |
| ArcSegment | Represents a arc segment |
| ArcSegmentCollection | Represents a collection of NXOpen::Routing::ArcSegment objects |
| iterator | Iterator for accessing the contents of the collection |
| AssemblyDefinition | Represents a collection of NXOpen::Routing::SingleDevice objects that are used in an assembled product |
| AssignCornerBuilder | Builder class for Assign Corner which creates corner To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateAssignCornerBuilder Default values |
| AssignDiscontinuityBuilder | Builder to Assign Discontinuity for the stocks To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateAssignDiscontinuityBuilder Created in NX7.5.0 |
| AssignPathBuilder | Assigns path to a broken routing run To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateAssignPathBuilder Created in NX8.5.0 |
| AssignTangencyBuilder | Represents a NXOpen::Routing::AssignTangencyBuilder object |
| AssignTerminalsBuilder | Builder for creating/editing terminals |
| AssignTerminalsItemBuilder | Builder for creating/editing terminals |
| AttributeHolder | Represents a NXOpen::Routing::AttributeHolder Use Routing::RouteManager::CreateAttributeHolder to get the instance of this class |
| AttributeMembersBuilder | Creates attibutemembers builder object to add to the search criteria list used by FindByAttributesBuilder To create a new instance of this class, use NXOpen::Routing::FindByAttributesBuilder::AttributeMembersBuilder Created in NX8.5.0 |
| BendCorner | Computes a fillet curve between two linear segments to form a smooth bend transition from one segment to another |
| BendCornerCollection | Represents a collection of NXOpen::Routing::BendCorner objects |
| iterator | Iterator for accessing the contents of the collection |
| BendReportManager | The Routing Bend Report Manager allows you to get a variety of bend reports |
| Mil98Report | Used in the MIL-D-9898 C specification reports |
| SegmentInformation | Used by all the reports to hold the information of the segments under port, solid body, segment, stock, stock component, or feature representing the piece of stock |
| XyzReport | Used in the XYZ bend reports |
| YbcReport | Used in the YBC bend reports |
| BranchPathNumberingBuilder | Builder class for Branch Path Numbering |
| BuilderFactory | Represents an NXOpen::Routing::BuilderFactory object |
| BuiltInPath | The Routing BuiltInPath object stores a set of curves |
| BuiltInPathBuilder | Builder for creating/editing the Built-in Paths |
| BuiltInPathCollection | Represents a collection of NXOpen::Routing::BuiltInPath objects |
| iterator | Iterator for accessing the contents of the collection |
| BulkReplacementBuilder | Builder class for Bulk Replacement which manages replacement operations on Routing objects Not support KF |
| CharacteristicList | Contains a list of characteristics |
| CharacteristicInformation | Contains the type and name of a characteristic |
| ChoosePartPluginData | Data object created by Routing for use by the Choose Part plugin called by the Place Part command |
| ClockPartBuilder | Builder class for clock part object To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateClockPartBuilder Default values |
| CompareRunsBuilder | Represents a NXOpen::Routing::CompareRunsBuilder , used to compare runs in the work part to the ones in another part, or to runs defined in xml files gathered in a folder (native mode) or on an item revision (managed mode) |
| ConnectedCurvesBuilder | Builder for creating automatically creating segments on end-to-end connected curves |
| ConnectivityDefinition | The base class for various connection objects |
| ConnectPathBuilder | Represents a NXOpen::Routing::ConnectPathBuilder |
| ControlPoint | Routing Control Points define a position in space, and are used to determine connections from segments to segments, and segments to ports |
| ControlPointCollection | Represents a collection of NXOpen::Routing::ControlPoint objects |
| iterator | Iterator for accessing the contents of the collection |
| CopeCorner | The cope corner is a corner that trims stocks at a junction |
| CopeCornerBuilder | Builder class for Cope Corner object To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateCopeCornerBuilder |
| CopeCornerCollection | Represents a collection of NXOpen::Routing::CopeCorner objects |
| iterator | Iterator for accessing the contents of the collection |
| Corner | The Routing Corner is the abstract parent class of all other corner objects |
| CornerCollection | Represents a collection of NXOpen::Routing::Corner objects |
| iterator | Iterator for accessing the contents of the collection |
| CornerTypeBuilder | Contains setting for corner creation |
| CreateFabricationBuilder | Builder class to fabricate subassembly from standard parts, path segments, stock, and other routing objects within the current routing assembly To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateFabricationBuilder Created in NX8.0.0 |
| CrossSection | A NXOpen::Routing::CrossSection defines a profile to sweep for NXOpen::Routing::Stock objects |
| CrossSectionBuilder | Builder for qualifying a Simple / Detail Cross Section To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateCrossSectionBuilder Default values |
| CrossSectionCollection | Represents a collection of NXOpen::Routing::CrossSection objects |
| iterator | Iterator for accessing the contents of the collection |
| CustomManager | The Routing Custom Manager allows you to customize Routing by setting session wide Routing preferences and by adding plugins, callbacks, and design rules |
| DefineRunBuilder | Builder Class for DefineRun Object To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateDefineRunBuilder Created in NX8.5.0 |
| DeleteFontsBuilder | Represents a NXOpen::Routing::DeleteFontsBuilder To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateDeleteFontsBuilder Created in NX8.5.0 |
| DeleteGapsBuilder | Represents a NXOpen::Routing::DeleteGapsBuilder To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateDeleteGapsBuilder Created in NX8.5.0 |
| DeleteObjectsBuilder | Represents a NXOpen::Routing::DeleteObjectsBuilder To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateDeleteObjectsBuilder Created in NX6.0.0 |
| DesignRule | Represents NXOpen::Routing::DesignRule object Creator not available in KF |
| DesignRuleCollection | Represents a collection of NXOpen::Routing::DesignRule objects |
| iterator | Iterator for accessing the contents of the collection |
| DesignRuleManager | Represents NXOpen::Routing::DesignRuleManager object Creator not available in KF |
| DesignRuleOverride | Represents Routing DesignRuleOverride object Creator not available in KF |
| DesignRuleViolation | Represents NXOpen::Routing::DesignRuleViolation object Design Rule Violation object is created automatically during design rule check Created in NX4.0.2 |
| DesignRuleViolationCollection | Represents a collection of NXOpen::Routing::DesignRuleViolation objects |
| iterator | Iterator for accessing the contents of the collection |
| DesignRuleViolationLocation | Represents NXOpen::Routing::DesignRuleViolationLocation object Design Rule Violation Location object get created automatically during design rule check Created in NX6.0.0 |
| DesignRuleViolationLocationCollection | Represents a collection of NXOpen::Routing::DesignRuleViolationLocation objects |
| iterator | Iterator for accessing the contents of the collection |
| DesignRuleViolationViewer | This class can be used to set the violation id, update text for overridding the violation and update the user name used to override the violation |
| DeviceRelationship | Represents a relationship between NXOpen::Routing::SingleDevice objects |
| DiscontinuityCorner | A discontinuity corner is a corner that forces Routing::Stock objects to split as they cover the segments attached to the discontinuity corner |
| DiscontinuityCornerCollection | Represents a collection of NXOpen::Routing::DiscontinuityCorner objects |
| iterator | Iterator for accessing the contents of the collection |
| Division | Represents NXOpen::Routing::Division Creator not available in KF because transient objects are not supported |
| DivisionsBuilder | Represents a NXOpen::Routing::DivisionsBuilder |
| DuctReinforcement | Represents a Duct Reinforcement feature used for creating/editing reinforcements on the inside or outside of rectangular HVAC ducts |
| DuctReinforcementBuilder | Builder for creating/editing duct reinforcements |
| DuctSizeCalculatorBuilder | Builder to perform calculations of the duct which is to be used in the HVAC applications |
| EditBendAngleBuilder | To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateEditBendAngleBuilder Created in NX7.5.0 |
| EditCharacteristicsBuilder | Builder to edit required and optional characteristics of Routing::Stock or Assemblies::Component as defined in the application view file |
| EditLineSegmentBuilder | Builder for the "Edit Line Segment" operation |
| EditPlacePartBuilder | To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateEditPlacePartBuilder Created in NX10.0.0 |
| ElbowSnapSettings | Helper object used the by NXOpen::Routing::LinearPathBuilder builder |
| EndFormBuilder | Builder for creating End Form |
| ExtractPort | Routing ExtractPort object is an extract of Port class To create an instance of this class use Routing::PortCollection::CreateExtractPort Created in NX4.0.0 |
| FeaturePort | NXOpen::Routing::FeaturePort is a NXOpen::Features::Feature associated with NXOpen::Routing::Port |
| Filler | Represents a Filler Created in NX4.0.0 |
| FillerCollection | Represents a collection of NXOpen::Routing::Stock objects |
| iterator | Iterator for accessing the contents of the collection |
| FillerStockBuilder | Creates Filler stock on selected Segments |
| FindByAttributesBuilder | Find runs/objects with specified attribute name and attribute value criteria, highlight the corresponding nodes in the run navigator and the graphics area To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateFindByAttributesBuilder Created in NX8.5.0 |
| FittingOverstock | The NXOpen::Routing::FittingOverstock object represents overstock applied over the faces of the routing parts |
| FittingOverstockBuilder | Builder for creating or editing NXOpen::Routing::FittingOverstock objects |
| FittingOverstockCollection | Represents a collection of NXOpen::Routing::FittingOverstock objects |
| iterator | Iterator for accessing the contents of the collection |
| FittingPort | Represents a Routing Fitting Port ObjectNXOpen::Routing::FittingPort |
| FittingPortCollection | Represents a collection of NXOpen::Routing::FittingPort objects |
| iterator | Iterator for accessing the contents of the collection |
| FixturePort | NXOpen::Routing::FixturePort objects are objects that segments are routed through when creating a routing path |
| FixturePortCollection | Represents a collection of NXOpen::Routing::FixturePort objects |
| iterator | Iterator for accessing the contents of the collection |
| FormboardFrame | The NXOpen::Routing::FormboardFrame is a (not pure) virtual class |
| FormboardFrameCGM | Represents a Formboard Frame CGM |
| FormboardFrameCollection | Represents a collection of NXOpen::Routing::FormboardFrame objects |
| iterator | Iterator for accessing the contents of the collection |
| FormboardFramePattern | Represents a Formboard Frame Pattern |
| FormboardFrameRectangle | Represents a Formboard Frame Rectangle |
| FormboardPlacementCoordinateSystemBuilder | Builder for Creating/Editing the Formboard Placement Coordinate Systems |
| GapArcSegment | Represents a gap arc segment |
| GapDisplayBuilder | Builder for creating a gap arc object on a line segment |
| HandrailBuilder | Represents a NXOpen::Routing::HandrailBuilder Creates a handrail from a selected point |
| HealPath | Represents a NXOpen::Routing::HealPath object which holds the data used in the creation of the heal path spline |
| IAxisPort | Interface class for all routing objects that specify a direction Created in NX4.0.0 |
| ICharacteristic | Interface for querying and setting characteristic (UG attribute values) on various routing objects |
| InfoObjectsBuilder | Represents a NXOpen::Routing::InfoObjectsBuilder To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateInfoObjectsBuilder Created in NX6.0.0 |
| InstanceNameLookupBuilder | Represents a NXOpen::Routing::InstanceNameLookupBuilder |
| InsulationBuilder | Represents NXOpen::Routing::InsulationBuilder |
| InsulationService | Represents a NXOpen::Routing::InsulationService object |
| IntegrateRunsBuilder | Builder Class for Integrate Runs Object To create a new instance of this class, use NXOpen::Routing::RouteManager::IntegrateRunsBuilder Default values |
| InterfaceTerminalBase | The NXOpen::Routing::InterfaceTerminalBase corresponds to an abstract class for a prototype NXOpen::Routing::Port |
| InterfaceTerminalRelationshipBase | The abstract class NXOpen::Routing::InterfaceTerminalRelationshipBase relates many NXOpen::Routing::Port s to one NXOpen::Routing::Port |
| InterfaceTerminalRelationshipCollection | Represents a collection of NXOpen::Routing::InterfaceTerminalRelationshipShadow objects |
| iterator | Iterator for accessing the contents of the collection |
| InterfaceTerminalRelationshipShadow | Represents an assembly shadow of NXOpen::Routing::InterfaceTerminalRelationshipBase |
| InterfaceTerminalShadow | Represents the defining data for a physical NXOpen::Routing::Port |
| IPath | The Routing IPath object is a list of segments in a route |
| IRoutePosition | Interface class for all routing objects that specify a single (possibly associative) location in space |
| ISegment | Interface class for all routing segments [Line/Arc/Spline] Created in NX4.0.0 |
| ISegmentCollection | Represents a collection of Routing::ISegment objects |
| iterator | Iterator for accessing the contents of the collection |
| ItemDefinition | NXOpen::Routing::ItemDefinition object corresponds to DDID in AP212 and to a piece part or routing stock in NX |
| LinearPathBuilder | Builder for creating routing linear paths |
| LinearPathSettings | Helper object used the by Routing::LinearPathBuilder builder |
| LineSegment | Represents a line segment |
| LineSegmentCollection | Represents a collection of NXOpen::Routing::LineSegment objects |
| iterator | Iterator for accessing the contents of the collection |
| LogicalConnection | Represents a connection between mutiple From and To Routing::LogicalTerminal |
| LogicalTerminal | Assembly instance of a NXOpen::Routing::InterfaceTerminalBase |
| ManualRouteBuilder | To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateManualRouteBuilder Created in NX7.5.0 |
| MergeStocksBuilder | Represents a NXOpen::Routing::MergeStocksBuilder Builder for merging routing stocks ( including space reservation stocks ) |
| MiterCorner | This class defines a mitered corner |
| MiterCornerCollection | Represents a collection of NXOpen::Routing::MiterCorner objects |
| iterator | Iterator for accessing the contents of the collection |
| MiteredBendCorner | Computes a fillet curve between two linear segments to form a smooth bend transition from one segment to another that represents a mitered bend |
| MiteredBendCornerCollection | Represents a collection of NXOpen::Routing::MiteredBendCorner objects |
| iterator | Iterator for accessing the contents of the collection |
| ModelTerminalsBuilder | The Builder to Model/UnModel the Terminals To create a new instance of this class, use NXOpen::Routing::RouteManager::ModelTerminalsBuilder Default values |
| MultiPort | Represents a NXOpen::Routing::MultiPort |
| MultiPortCollection | Represents a collection of NXOpen::Routing::MultiPort objects |
| iterator | Iterator for accessing the contents of the collection |
| NamingPatternBuilder | Builder for selecting a naming pattern for terminal arrays |
| ObjectRelationship | Represents a relationship between Routing objects |
| OffsetPath | The Routing OffsetPath object is the set of information needed to define an offset route |
| OffsetPathCollection | The Routing OffsetPath object is a list of segments in a route |
| iterator | Iterator for accessing the contents of the collection |
| Overstock | Represents an NXOpen::Routing::Overstock object |
| OverstockApplication | Represents a collection of NXOpen::Routing::OverstockApplication objects |
| OverstockApplicationCollection | Represents a collection of NXOpen::Routing::OverstockApplication objects |
| iterator | Iterator for accessing the contents of the collection |
| OverstockBuilder | Builder for creating/editing overstocks |
| OverstockFacesBuilder | Builder for qualifying faces for overstock application over fittings |
| PartDefinitionBase | The abstract class NXOpen::Routing::PartDefinitionBase contains information defining a logical part |
| PartDefinitionShadow | NXOpen::Routing::PartDefinitionShadow contains the defining data for a logical part, such as an connector |
| Path | The Routing Path object is the set of ordered continuous segments |
| PathStockBuilder | Assigns stocks to segments based of users critiera and the current default stock |
| PlaceElbowsBuilder | Class PlaceElbowsBuilder To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateRoutingPlaceElbowsBuilder Created in NX12.0.0 |
| PlacementSolutionsBuilder | To create a new instance of this class, use NXOpen::Routing::RouteManager::CreatePlacementSolutionsBuilder Created in NX7.5.0 |
| PlacePartBuilder | To create a new instance of this class, use NXOpen::Routing::RouteManager::CreatePlacePartBuilderPTS Created in NX7.5.0 |
| Platform | NXOpen::Routing::Platform objects are automatically created and updated by NXOpen::Routing::Platform objects |
| PlatformCreatorBuilder | Builder for creating platform |
| PlatformFeature | Represents a Platform feature |
| Port | Routing Port Object is a parent class for FixturePort, ExtractPort, FittingPort, Multiport, StockPort and TerminalPort Creator not available in KF |
| PortArrayListItemBuilder | Builder for selecting a pattern and initial positions in terminal arrays builder |
| PortArrayListItemBuilderList | Represents a list of objects |
| PortArraysBuilder | Builder for creating terminal arrays in multiports |
| PortCollection | Represents a collection of NXOpen::Routing::Port objects |
| iterator | Iterator for accessing the contents of the collection |
| PortConnection | The Routing PortConnection object is used by Routing to position ports while placing parts |
| PortConnectionCollection | Represents a collection of NXOpen::Routing::PortConnection objects |
| iterator | Iterator for accessing the contents of the collection |
| ProxyPort | A NXOpen::Routing::ProxyPort is a port that represents a connector in another design zone, but not present in this design zone |
| ProxyPortCollection | Represents a collection of NXOpen::Routing::ProxyPort objects |
| iterator | Iterator for accessing the contents of the collection |
| QualifyPortBuilder | Builder for creating/editing ports |
| QuickPathBuilder | Builder for creating a path between user selected points |
| RemoveDiscontinuityBuilder | Builder class for remove discontinuity object To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateRemoveDiscontinuityBuilder Created in NX7.5.0 |
| ReuseLibrary | Represents a NXOpen::Routing::ReuseLibrary No creator is available in KF |
| RootObject | The NXOpen::Routing::RootObject is the parent class of all other Routing logical objects |
| RouteLogicalAssociation | RouteLogicalAssociation object associates non-electrical components to electrical components |
| RouteLogicalAssociationCollection | Collection class for RouteLogicalAssociation object To obtain an instance of this class, refer to NXOpen::Routing::RouteManager Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| RouteManager | Manages various Routing collections and methods for use in the current work part |
| SearchCriteria | Fill in this information with as much as you know about the object you want to find |
| RouteObject | The Top level routing data model object |
| RouteObjectCollector | Represents a NXOpen::Routing::RouteObjectCollector class to create objects for getting routing objects |
| RouteObjectCollectorList | Represents a list of objects |
| RoutePartDescriptor | Represents a part descriptor chrx |
| RoutePartDescriptorCollection | Represents a collection of NXOpen::Routing::RoutePartDescriptor objects |
| iterator | Iterator for accessing the contents of the collection |
| RouteSegmentFont | Represents a route segment font |
| RouteSegmentFontElement | Represents a route segment font element |
| RouteSweptFoldBuilder | Represents a Rout Swept Fold Builder To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateRouteSweptFoldBuilder Created in NX7.0.0 |
| RouteSweptTwistBuilder | To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateRouteSweptTwistBuilder Created in NX6.0.0 |
| RoutingManager | Represents an NXOpen::Routing::RoutingManager object |
| RoutingMeasureDistanceBuilder | Represents a NXOpen::Routing::RoutingMeasureDistanceBuilder Creator not available in KF because transient objects are not supported |
| RoutingSystem | Routing object is a collection of NXOpen::Routing::Run objects |
| RoutingSystemCollection | Represents a collection of NXOpen::Routing::RoutingSystem objects |
| iterator | Iterator for accessing the contents of the collection |
| Run | Routing Run object references components and stocks which comprise a piping run |
| RunCollection | Represents a collection of NXOpen::Routing::Run objects |
| iterator | Iterator for accessing the contents of the collection |
| RunItem | Routing Run Item object references components which comprise a piping run |
| RunItemsBuilder | The builder for creating the list item of RunItems To create a new instance of this class, use NXOpen::Routing::DefineRunBuilder::CreateRunItemsBuilder Created in NX8.5.0 |
| RunItemsBuilderList | Represents a list of objects |
| SBendCorner | The Routing SBendCorner defines a S-Bend |
| SBendCornerCollection | Represents a collection of NXOpen::Routing::SBendCorner objects |
| iterator | Iterator for accessing the contents of the collection |
| SegmentManager | Contains the type of the routing part as well as the Collection objects for creating/iterating over routing objects |
| SubdivideOption | Contains subdivide segment method information |
| SegmentPairBuilder | The builder for creating the list item of SegmentPairs To create a new instance of this class, use NXOpen::Routing::AssignDiscontinuityBuilder::SegmentPairBuilder Created in NX7.5.0 |
| SelectControlPoint | Represents a single object selection |
| SelectISegment | Represents a single object selection |
| SelectLineSegment | Represents a single object selection |
| SelectPort | Represents a single object selection |
| SelectRun | Represents a single object selection |
| SelectStock | Represents a single object selection |
| SimplifyPathBuilder | Represents a NXOpen::Routing::SimplifyPathBuilder for Simplify Path operation |
| SingleDevice | The Routing SingleDevice corresponds to an abstract instance of NXOpen::Routing::ItemDefinition |
| SpaceReservationBuilder | Represents a NXOpen::Routing::SpaceReservationBuilder |
| SplinePathBuilder | Represents a NXOpen::Routing::SplinePathBuilder object |
| SplineSegment | Represents a spline segment |
| SplineSegmentCollection | Represents a collection of NXOpen::Routing::SplineSegment objects |
| iterator | Iterator for accessing the contents of the collection |
| SplitDuctBuilder | Represents a NXOpen::Routing::SplitDuctBuilder |
| SplitRunBuilder | Builder Class for Split Run Object To create a new instance of this class, use NXOpen::Routing::RouteManager::SplitRunBuilder Default values |
| Stock | The NXOpen::Routing::Stock object represents a material (such as as pipe or tube) that covers a path of segments |
| StockBlockBuilder | Assigns stocks to segments based on user's criteria and the current default stock |
| StockBrowserBuilder | Builder class for stock browser |
| StockBuilder | Builder for creating/editing stocks |
| StockCollection | Represents a collection of NXOpen::Routing::Stock objects |
| iterator | Iterator for accessing the contents of the collection |
| StockColorBuilder | Represents a NXOpen::Routing::StockColorBuilder |
| StockData | A NXOpen::Routing::StockData contains the various profiles, characteristic information, NXOpen::Routing::Anchor and other attributes that define NXOpen::Routing::Stock objects |
| StockDataCollection | Represents a collection of NXOpen::Routing::StockData objects |
| iterator | Iterator for accessing the contents of the collection |
| StockDataRefreshBuilder | Represents a NXOpen::Routing::StockDataRefreshBuilder Builder for updating/reloading routing stock data definitions |
| StockDefinition | Represents Routing StockDefinition object Creator not available in KF |
| StockDevice | The Routing StockDevice corresponds to a generic stock instance of Routing::SingleDevice |
| StockOffsetPointBuilder | Applies Assemblies Constraints to a selected NXOpen::Point or NXOpen::Routing::ControlPoint to mimic the update/move behavior of the input smart NXOpen::Point |
| StockOffsetPort | NXOpen::Routing::StockOffsetPort class handles the relationship between a component part's port occurrence and the dumb offset port in the work part |
| StockOffsetPortCollection | Represents a collection of NXOpen::Routing::StockOffsetPort objects |
| iterator | Iterator for accessing the contents of the collection |
| StockPartConverterBuilder | Represents a NXOpen::Routing::StockPartConverterBuilder Builder for Part Conversion of the stocks |
| StockPort | NXOpen::Routing::StockPort objects are automatically created and updated by NXOpen::Routing::Stock objects |
| StockStyleBuilder | Builder class to assigns style to the selected stock |
| StockTransition | Represents NXOpen::Routing::StockTransition object |
| StockTransitionBuilder | Builder for creating/editing stockTransition |
| SubdivideSegmentBuilder | Represents a NXOpen::Routing::SubdivideSegmentBuilder |
| TangencyGroupBuilder | Represents a NXOpen::Routing::TangencyGroupBuilder Assign tangency for segments connected with current editing spline |
| TerminalPort | A NXOpen::Routing::TerminalPort models the pins on an electrical connector |
| TerminalPortBuilder | Builder for creating the Terminal List Item for the ModelTerminals To create a new instance of this class, use NXOpen::Routing::RouteManager::TerminalPortBuilder Created in NX7.5.0 |
| TerminalPortCollection | The collection of all NXOpen::Routing::TerminalPort s |
| iterator | Iterator for accessing the contents of the collection |
| TransformPathBuilder | Builder for the "Transform Path" operation |
| UnifyPathBuilder | Builder to unify Routing::Stock and Assemblies::Component based on specified characteristic values |
| WatertightFittingsBuilder | Represents a NXOpen::Routing::WatertightFittingsBuilder To create a new instance of this class, use NXOpen::Routing::RouteManager::CreateWatertightFittingsBuilder Created in NX8.0.0 |
| WindCatcher | Represents a Wind Catcher feature |
| WindCatcherBuilder | Builder class for Wind Catcher feature |
| Wire | The Routing Wire object is the set of information needed to define a ROUTE_wire |
| WireCollection | The Routing Wire object is a list of segments in a route and some stock |
| iterator | Iterator for accessing the contents of the collection |
| ShapeSearch | Provides classes and interfaces for Shape Search |
| SearchManager | This class manages Shape Search |
| ShapeSearchBuilder | This class provides the methods to execute shape search and get the searched results |
| SheetMetal | Provides classes and interfaces for Sheet Metal |
| FlatPatternSettings | Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings |
| FlatPatternCalloutTypeDisplay | The members of the following structure are the display data for a callout in a flat pattern drawing member view |
| FlatPatternObjectTypeDisplay | The members of the following structure are the display data for an object in a flat pattern drawing member view |
| ShipDesign | Provides classes and interfaces for Ship Design |
| ApplicationUtils | Represents Generator which wrap the ship api for china To obtain an instance of this class, refer to NXOpen::ShipDesign::ShipSession Created in NX11.0.0 |
| GeneralArrangementManager | Represents the interface for General Arrangement classes To obtain an instance of this class, refer to NXOpen::ShipDesign::ShipSession Created in NX12.0.0 |
| Generator | Represents Generator which wrap the ship api for china To obtain an instance of this class, refer to NXOpen::ShipDesign::ShipSession Created in NX11.0.0 |
| Navigator | Represents the interface for navigator action classes Use the NXOpen::ShipDesign::NavigatorCollection class to get a navigator Created in NX11.0.1 |
| NavigatorCollection | Represents the interface for navigator action classes To obtain an instance of this class, refer to NXOpen::ShipDesign::ShipSession Created in NX11.0.1 |
| NavigatorNode | Represents the interface for navigator view classes Use the NXOpen::ShipDesign::NavigatorView class to create a navigator node Created in NX11.0.1 |
| NavigatorView | Represents the interface for navigator view classes Use the NXOpen::ShipDesign::Navigator class to get a navigator view Created in NX11.0.0 |
| ShipNavigatorNodeBuilder | Represents the ship navigator node builder to add or edit ship navigator node |
| ShipNavigatorRoot | Represents the interface for ship navigator root classes |
| ShipSession | Represents Ship session To obtain an instance of this class, refer to NXOpen::Session Created in NX11.0.0 |
| SIM | Provides classes and interfaces for Machine Tool Builder and CAM-Simulation |
| PostConfigurator | Provides classes and interfaces for Post Configurator |
| CreationPostBuilder | This class is used to create a new postprocessor |
| LayerManagerBuilder | This class is represents a SIM::PostConfigurator::LayerManagerBuilder |
| PostConfiguratorBuilder | This class is used to create a post configurator builder |
| PostConfiguratorDebugBuilder | This class is represents a SIM::PostConfigurator::PostConfiguratorDebugBuilder |
| PostConfiguratorManager | Represents Post Configurator Manager Use NXOpen::Session::PostConfiguratorManager to get the instance of this class |
| UdeBuilder | This class is used to create a new event |
| UdeBuilderList | Represents a list of objects |
| UdeEditorBuilder | This class is represents a SIM::PostConfigurator::UdeEditorBuilder |
| UdeParameterBuilder | This class is used to create a new event item |
| UdeParameterBuilderList | Represents a list of objects |
| ArchiveImportBuilder | Represents a ArchiveImportBuilder builder object |
| Breakpoint | Represents the Breakpoint class object |
| ExportMachineKitBuilder | This class is used for the Export Machine Kit Dialog |
| ImportMachineKitBuilder | This class is used for the Import Machine Kit Dialog |
| IsvControlPanelBuilder | Represents a NXOpen::SIM::IsvControlPanelBuilder To create a new instance of this class, use NXOpen::SIM::KinematicConfigurator::CreateIsvControlPanelBuilder Created in NX8.0.0 |
| KinematicAxis | Represents the SimKimAxis class object |
| KinematicAxisBuilder | Represents the SimKimAxisBuilder class object |
| KinematicChain | This class is used for add kinematic chain to the list |
| KinematicChainConfiguration | This class is used for define kinematic chains |
| KinematicChainList | Represents a list of objects |
| KinematicChannelBuilder | This class is used for add kinematic channel to the channel configuratation list |
| KinematicChannelBuilderList | Represents a list of objects |
| KinematicChannelConfigurationBuilder | This class is used for channel configuration |
| KinematicComponent | Represents the KinematicComponent class object |
| KinematicComponentBuilder | Represents the KinematicComponentBuilder class object |
| KinematicComponentCollection | Represents the SimKimComponent Collection To obtain an instance of this class, refer to NXOpen::SIM::KinematicConfigurator Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| KinematicConfigurator | Represents the ISV base class object |
| KinematicImportMcfBuilder | Represents a builder for an import axis and channel data from mcf |
| KinematicJunction | Represents the KinematicJunction class object |
| KinematicJunctionBuilder | Represents the SimKimJunctionBuilder class object |
| KinematicJunctionBuilderList | Represents a list of objects |
| KinematicModel | Represents the Kinematic Model class object |
| KinematicSinumerikCaBuilder | This class is used for edit sinumerik collision avoidance properties |
| LoadSnapshotBuilder | Represents a NXOpen::SIM::LoadSnapshotBuilder To create a new instance of this class, use NXOpen::SIM::KinematicConfigurator::CreateSimulationLoadsnapshotBuilder Created in NX12.0.0 |
| MachineKitBuilder | This class is used for the Machine Kit Create Dialog |
| MachineLibraryBuilder | This class is used for the Machine Library Dialog |
| MachineToolConfiguration | Represents a Machine Tool Configuration object |
| NcChannelSelectionData | Represents the NcChannelSelectionData class object |
| NcProgram | Represents the NcProgram class object |
| NcProgramManagerBuilder | Represents a NcProgramManagerBuilder builder object |
| NcProgramSource | Represents the NcProgramSource class object |
| SaveSnapshotBuilder | Represents a NXOpen::SIM::SaveSnapshotBuilder To create a new instance of this class, use NXOpen::SIM::KinematicConfigurator::CreateSimulationSavesnapshotBuilder Created in NX12.0.0 |
| SimDebugBuilder | Represents a NXOpen::SIM::SimDebugBuilder To create a new instance of this class, use NXOpen::SIM::KinematicConfigurator::CreateSimDebugBuilder Created in NX8.0.0 |
| SinumerikCaExportBuilder | This class is used for export a spf file |
| SinumerikCaFacetBuilder | This class is used for set the facet tolerance |
| SinumerikCaPlaceholderBuilder | This class is used for select or unselect component of the placeholder tools |
| SinumerikCaSimplifyBodiesBuilder | This class is used for replace geometry |
| Snapshot | Represents the Snapshot class object |
| TimeAnalysis | Represents the TimeAnalysis class object |
| TDP | Provides classes and interfaces for Technical Data Package (TDP) |
| Manager | Represents the TDP Manager class |
| PublisherBuilder | This builder is used to publish Technical Data Package, or TDP for short |
| TemplateAutomaticTable | Represents the NXOpen::TDP::TemplateAutomaticTable object |
| TemplateAutomaticTableBuilder | Represents a Template Automatic Table Builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateAutomaticTableBuilder Created in NX1847.0.0 |
| TemplateBaseRectangleBuilder | Represents a Template Base Rectangle Builder This is an abstract class and cannot be instantiated |
| TemplateEditCellBuilder | Represents a Edit Cell builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateEditcellBuilder Default values |
| TemplateFormField | Represents the NXOpen::TDP::TemplateFormField object |
| TemplateFormFieldBuilder | Represents a Template Form Field Builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateFormFieldBuilder Created in NX1847.0.0 |
| TemplateImage | Represents the NXOpen::TDP::TemplateImage object |
| TemplateImageBuilder | Represents a Template Image Builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateImageBuilder Created in NX1847.0.0 |
| TemplateNoteBuilder | Represents a TDP Template Note builder used to create Notes in the Template environment To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateNoteBuilder Created in NX1847.0.0 |
| TemplatePage | Represents the NXOpen::TDP::TemplatePage object |
| TemplatePageBuilder | Represents a TDP::TemplatePage builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplatePageBuilder Created in NX1847.0.0 |
| TemplatePropertiesBuilder | Represents a Template Properties Builder No KF support |
| TemplateRectangle | Represents the NXOpen::TDP::TemplateRectangle object |
| TemplateRectangleBuilder | Represents a Template Rectangle Builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateRectangleBuilder Created in NX1847.0.0 |
| TemplateTableSection | Represents the NXOpen::TDP::TemplateTableSection object |
| TemplateTableSectionBuilder | Represents a NXOpen::TDP::TemplateTableSection builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateTableSectionBuilder Created in NX1847.0.0 |
| TemplateViewCarousel | Represents the NXOpen::TDP::TemplateViewCarousel object |
| TemplateViewCarouselBuilder | Represents a Template View Carousel Builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateViewCarouselBuilder Created in NX1847.0.0 |
| TemplateViewport | Represents the NXOpen::TDP::TemplateViewport object |
| TemplateViewportBuilder | Represents a Template Viewport Builder To create a new instance of this class, use NXOpen::TDP::Manager::CreateTemplateViewportBuilder Created in NX1847.0.0 |
| ToolDesigner | Provides classes and interfaces for ToolDesigner |
| Tooling | Provides classes and interfaces for Tooling |
| AddReusableFeatureBuilder | Represents a NXOpen::Tooling::AddReusableFeatureBuilder To create a new instance of this class, use NXOpen::Tooling::AddReusableFeatureCollection::CreateBuilder Default values |
| AddReusableFeatureCollection | Represents a collection of AddReusableFeature To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| InputData | Defines the input data of AddReusableFeatureBuilder |
| iterator | Iterator for accessing the contents of the collection |
| AddReusablePart | Represents a NXOpen::Tooling::AddReusablePart To create a new instance of this class, use NXOpen::Tooling::AddReusablePartCollection::CreateBuilder Default values |
| AddReusablePartCollection | Represents a collection of AddReusablePart To obtain an instance of this class, refer to NXOpen::Part Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| AssemblyDrawingBuilder | Represents a NXOpen::Tooling::AssemblyDrawingBuilder which is used to create or edit the Assembly Drawing |
| AssignPatchBuilder | Represents a builder to be used to add sheet bodies as patch surfaces or delete patch surfaces |
| AssignPatchCollection | Represents a collection of AssignPatch builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| AutoDieCollection | Represents a collection of Die Design Draw Punch To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| AutoDieGroup | Represents a group for Auto Stamping Die To obtain an instance of this class us NXOpen::Tooling::AutoDieCollection Created in NX8.0.0 |
| AutoDimensionBuilder | Represents a NXOpen::Tooling::AutoDimensionBuilder which is used to create or edit the Auto Dimension |
| BackingPadBuilder | Represents a NXOpen::Tooling::BackingPadBuilder which is used to create or delete the Backing Pad |
| BendInsertDesignBuilder | Represents a NXOpen::Tooling::BendInsertDesignBuilder Bend Insert Design is to create inset puch or die for bend |
| BendInsertDesignCollection | Creates a NXOpen::Tooling::BendInsertDesignCollection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BendOperationBuilder | Represents a NXOpen::Tooling::BendOperationBuilder builder |
| BendOperationCollection | Creates a NXOpen::Tooling::BendOperationBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| BlankGeneratorBuilder | Represents a NXOpen::Tooling::BlankGeneratorBuilder This class is for Blank Generator Design UI To create a new instance of this class, use NXOpen::Tooling::BlankGeneratorCollection::CreateBlankGeneratorBuilder Created in NX7.5.0 |
| BlankGeneratorCollection | Creates a NXOpen::Tooling::BlankGeneratorBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BlankLayoutBuilder | Progressive Die Wizard blank layout builder To create a new instance of this class, use NXOpen::Tooling::BlankLayoutCollection::CreateBlankLayoutBuilder Default values |
| BlankLayoutCollection | Creates a NXOpen::Tooling::BlankLayoutBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BlankNestingBuilder | Blank Nesting Builder of PDW, EDW and Die Engineering |
| BlankNestingCollection | Creates a NXOpen::Tooling::BlankNestingBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| BlendCurve3DBuilder | Represents a NXOpen::Tooling::BlendCurve3DBuilder builder which implements blend curves in one side where the corner radius is too small |
| BomListBuilder | Represents a NXOpen::Tooling::BomListBuilder builder |
| BomListDataProvider | Provides basic data for BOM List |
| BurringInsertBuilder | Progressive Die Wizard builder to design burring punch and die insert To create a new instance of this class, use NXOpen::Tooling::BurringInsertCollection::CreateBurringInsertBuilder Default values |
| BurringInsertCollection | Creates a NXOpen::Tooling::BurringInsertCollection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CaeReuseLibrary | Represents a NXOpen::Tooling::CaeReuseLibrary To obtain an instance of this class, refer to NXOpen::CAE::BaseFEModel Created in NX7.5.2 |
| CalculateAreaBuilder | The CalculateArea builder To create a new instance of this class, use NXOpen::Tooling::CalculateAreaCollection::CreateBuilder Default values |
| CalculateAreaCollection | Represents a collection of CalculateArea builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CAMDataManager | Represents an object that manages cam data objects |
| ChangeoverManagementBuilder | Represents a NXOpen::Tooling::ChangeoverManagementBuilder to support changeover workflow management |
| ChannelAdjustBuilder | The builder class for Channel Adjust which assists you to adjust the postion and the length of the channel |
| ChannelAdjustCollection | Creates a ChannelAdjust Collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ChannelFittingBuilder | The builder class for Channel Fitting which assists you to add cooling fitting |
| ChannelFittingCollection | Creates a ChannelFitting Collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ClearanceManagementBuilder | Progressive Die Wizard builder to management clearances |
| ClearanceManagementCollection | Creates a NXOpen::Tooling::ClearanceManagementCollection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CloneObject | Represents the clone operation in Add Reusable Component Builder |
| ClonePart | Represents the part inforamtion to be cloned in Add Reusable Component Builder |
| ColorExpressionsBuilder | Represents a NXOpen::Tooling::ColorExpressionsBuilder builder |
| CompDrawingBuilder | Represents a NXOpen::Tooling::CompDrawingBuilder which is used to create or edit the Component Drawing |
| ConceptDieBaseBuilder | Creates concept die_base builder for progressive die |
| ConceptPositionBuilder | Concept position builder for standard part design To create a new instance of this class, use NXOpen::Tooling::ConceptPositionCollection::CreateConceptPositionBuilder Created in NX6.0.0 |
| ConceptPositionCollection | Represents a collection of ConceptPosition To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ConceptStandardPartRecord | Represents a concept standard part object This object does not need a creator |
| ConcurrentDesignManagementBuilder | Represents a NXOpen::Tooling::ConcurrentDesignManagementBuilder to support concurrent design workflow management |
| CoolingConnectBuilder | The builder class for Cooling connection which assists you to create channel and connect it to other channels |
| CoolingConnectCollection | Creates a CoolingConnect Collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CoolingDefineChannelBuilder | The builder class for Cooling Define Channel which assists you to create channels directly |
| CoolingDefineChannelCollection | Creates a CoolingDefineChannel Collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| CoolingExtendBuilder | The builder class for Channel Extend which assists you to extend the channel |
| CoolingExtendCollection | Creates a CoolingExtend Collection |
| iterator | Iterator for accessing the contents of the collection |
| CoolingFittingData | Represents the cooling fitting data in Add Channel Fitting Builder |
| CoolingPatternBuilder | The builder class for Cooling pattern which assists you to create channels with selected curves |
| CoolingPatternCollection | Creates a CoolingPattern Collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| CopySolidBuilder | Represents a NXOpen::Tooling::CopySolidBuilder builder |
| CornerDesignBuilder | Represents a NXOpen::Tooling::CornerDesignBuilder , Corner Design is to provide tools to make corner |
| CornerDesignCollection | Creates a NXOpen::Tooling::CornerDesignCollection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| CostTableDataProvider | Provides basic data for cost feature table data |
| CreateBoxBuilder | Represents a box creation operation To create a new instance of this class, use NXOpen::Tooling::CreateBoxCollection::CreateBoxBuilder Default values |
| CreateBoxCollection | Creates CreateBoxBuilder collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DefineCamBuilder | Represents a NXOpen::Tooling::DefineCamBuilder to create different types of cam objects, which are used for kinematic motion To create a new instance of this class, use NXOpen::Tooling::ProgressiveDieManager::CreateDefineCamBuilder Default values |
| DefineLifterBuilder | Represents a NXOpen::Tooling::DefineLifterBuilder to create different types of lifter objects, which are used for kinematic motion |
| DefineNeutralFactorBuilder | Represeents a NXOpen::Tooling::DefineNeutralFactorBuilder to define neutral factor according to material and formula in the spreadsheet table |
| DesignTrimToolBuilder | Represents a builder to be used to create Mold Wizard design trim tool |
| DesignTrimToolCollection | Creates a DesignTrimToolCollection class To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| DieBaseBuilder | Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base |
| DieBaseCollection | Creates a NXOpen::Tooling::DieBaseCollection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DieCavityAndSlugHoleBuilder | Represents die cavity and slug hole builder |
| DieDesDrawDieBuilder | Represents the Die Design draw die management builder, which is to create a draw die by selected sheet body, curve and base plane |
| DieDesDrawPunchBuilder | Die Design draw punch management builder, create a draw die punch by selected sheet body, curve and base plane |
| DieDesignLowerBinderBuilder | Represents a Lower Binder builder To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateDieDesignLowerBinderBuilder Created in NX9.0.0 |
| DieDesignSettingBuilder | Represents a NXOpen::Tooling::DieDesignSettingBuilder This class is for Die Design Setting UI To create a new instance of this class, use NXOpen::Tooling::DieDesignSettingCollection::CreateDieDesignSettingBuilder Default values |
| DieDesignSettingCollection | Creates a NXOpen::Tooling::DieDesignSettingBuilder |
| iterator | Iterator for accessing the contents of the collection |
| DieDesignTrimPostBuilder | Represents a Trim Post builder To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateDieDesignTrimPostBuilder Created in NX9.0.0 |
| DieDesPierceInsertBuilder | Represents Die Design Pierce Insert builder |
| DieEngDefineProductOrientationBuilder | Die Engineer define product orientation builder |
| DieEngDieTipBuilder | Die Engineer die tip management builder |
| DieEngFormTaskBuilder | Represents a Form Task builder To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateDieEngFormTaskBuilder Default values |
| DieEngLineupBuilder | Die Engineer lineup management builder |
| DieEngProcessUpdateManagerBuilder | Die Engineer process update manager management builder |
| DieEngStampingCarryoverBuilder | Represents a Stamping Carryover builder To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateDieEngStampingCarryoverBuilder Created in NX10.0.0 |
| DieEngStampingOutputBuilder | Represents a Stamping Output builder To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateDieEngStampingOutputBuilder Default values |
| DieEngTrimAngleCheck | Represents a die engineering trim angle check analysis object To create or edit an instance of this class, use NXOpen::Tooling::DieEngTrimAngleCheckBuilder Created in NX8.5.0 |
| DieEngTrimAngleCheckBuilder | Represents a Trim Angle Check builder To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateDieEngTrimAngleCheckBuilder Default values |
| DieEngTrimTaskBuilder | Die Engineer trim task management builder, create a trim task by selected die tip, trim bounds, start plane and end plane |
| DieInsertBuilder | Represents die insert builder |
| DirectUnbendBuilder | The builder contains all inputs for direct unbend |
| DirectUnfoldBuilder | The builder contains all inputs for direct unfolding |
| DirectUnfoldCollection | Creates a NXOpen::Tooling::DirectUnfoldBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| DrawingSheetNameBuilder | Represents a NXOpen::Tooling::DrawingSheetNameBuilder To create a new instance of this class, use NXOpen::Tooling::ToolingDrawingCollection::CreateDrawingSheetNameBuilder Created in NX8.5.0 |
| EdgePatchBuilder | Represents a builder to be used to create edge patch surfaces |
| EdgePatchCollection | Represents a collection of EdgePatch builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| EjectorPostProcessingBuilder | Represents a builder to be used to create Mold Wizard ejector post processing |
| EjectorPostProcessingCollection | Creates a EjectorPostProcessingCollection class To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| EjectorTableBuilder | Represens a ejector table builder |
| EjectorTableData | Represents the ejector table data in Ejector Table Builder |
| ElectrodeBlankBuilder | Design electrode blank builder to create an electrode blank for the selected body |
| ElectrodeCheckingBuilder | Electrode Checking builder to check the touch status of all electrode |
| ElectrodeComponentBuilder | Electrode component builder to install holder and pallet |
| ElectrodeCopyBuilder | The ElectrodeCopy builder To create a new instance of this class, use NXOpen::Tooling::ElectrodeCopyCollection::CreateElectrodeCopyBuilder Default values |
| ElectrodeCopyCollection | Represents a collection of ElectrodeCopy builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ElectrodeDeleteBuilder | Electrode delete component builder to remove blank, pallet and holder from assembly |
| ElectrodeDesign | Represents an Electrode Design |
| ElectrodeDesignCollection | Represents a collection of Electrode Design |
| iterator | Iterator for accessing the contents of the collection |
| ElectrodeEDMOutputBuilder | Design electrode attribute transport builder to input and output an electrode attribute |
| ElectrodeInitializationBuilder | Electrode initialize project builder to creates an electrode design assembly |
| EnlargeSurfaceBuilder | Mold Wizard enlarge surface management builder, trims a enlarged surface to a boundary of edges, curves, datum planes or faces |
| EnlargeSurfaceCollection | Represents a collection of Enlarge Surface To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| EWDraftingBuilder | Represents the drafting builder which is used to create electrode drafting |
| EWMultiPositionBuilder | Represents the multiple position builder which is used to get transformed electrode heads together |
| EWMultiPositionCollection | Creates EWMultiPosition builder collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| FaceAttributeBuilder | Represents a builder to be used to create face attribute |
| FaceColorManagementBuilder | Tooling builder to assign and edit color of objects To create a new instance of this class, use NXOpen::Tooling::FaceColorManagementCollection::CreateFaceColorManagementBuilder Default values |
| FaceColorManagementCollection | Creates a NXOpen::Tooling::FaceColorManagementBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FaceSplitBuilder | Represents a face split operation To create a new instance of this class, use NXOpen::Tooling::FaceSplitCollection::CreateFaceSplitBuilder Default values |
| FaceSplitCollection | Creates Face Split collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FamilyMoldBuilder | Creates a Mold Wizard Family Mold builder To create a new instance of this class, use NXOpen::Tooling::FamilyMoldCollection::CreateFamilyMoldBuilder Created in NX6.0.0 |
| FamilyMoldCollection | Creates a NXOpen::Tooling::FamilyMoldCollection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FastenerAssemConfigBuilder | Represents a Fastener Assem Config Collection |
| FastenerAssemConfigCollection | Represents a collection of FastenerAssy To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FastenerAssy | Represents a NXOpen::Tooling::FastenerAssy To create a new instance of this class, use NXOpen::Tooling::FastenerAssyCollection::CreateBuilder Default values |
| FastenerAssyCollection | Represents a collection of FastenerAssy To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX5.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FastenerAssyCustomizationBuilder | Fastener assembly customization builder |
| FastenerAssyCustomizationCollection | Represents a collection of FastenerAssyCustomizationBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FastenerRemoveNodeBuilder | Fastener remove node builder |
| FastenerRemoveNodeCollection | Represents a collection of FastenerRemoveNodeBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FeatureReferenceSetBuilder | Represents a NXOpen::Tooling::FeatureReferenceSetBuilder builder |
| FlowAnalysisBuilder | Represents the builder which is used to create flow analysis |
| FlowDisplayBuilder | Represents the builder which is used to create flow analysis |
| ForceCalculationBuilder | Represents a NXOpen::Tooling::ForceCalculationBuilder Force Calculation Design is to calculate force of process To create a new instance of this class, use NXOpen::Tooling::ForceCalculationCollection::CreateForceCalculationBuilder Default values |
| ForceCalculationCollection | Creates a NXOpen::Tooling::ForceCalculationBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FormingInsertBuilder | Progressive Die Wizard builder to design forming punch and die insert To create a new instance of this class, use NXOpen::Tooling::FormingInsertCollection::CreateFormingInsertBuilder Default values |
| FormingInsertCollection | Creates a NXOpen::Tooling::FormingInsertBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| FreeformUnformBuilder | Represents a NXOpen::Tooling::FreeformUnformBuilder builder |
| GeneralInsertBuilder | General Insert Design Builder of PDW and EDW |
| GuidedExtensionBuilder | Builder for creating Guided Extension surface in NX To create a new instance of this class, use NXOpen::Tooling::GuidedExtensionManager::CreateBuilder Default values |
| GuidedExtensionManager | Represents the manager of the GuidedExtension builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager |
| HemFixerBuilder | Hem Fixer Builder of PDW and EDW |
| HoleDatumSymbolBuilder | Creates hole datum symbol builder for progressive die |
| HoleManufacturingNoteBuilder | Tooling builder for HoleManufacturingNote To create a new instance of this class, use NXOpen::Tooling::HoleManufacturingNoteCollection::CreateHoleManufacturingNoteBuilder Default values |
| HoleManufacturingNoteCollection | Creates a NXOpen::Tooling::HoleManufacturingNoteBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| HoleReportBuilder | Represents a NXOpen::Tooling::HoleReportBuilder This class is for Hole Report Design UI To create a new instance of this class, use NXOpen::Tooling::HoleReportCollection::CreateHoleReportBuilder Default values |
| HoleReportCollection | Creates a NXOpen::Tooling::HoleReportBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InitProjBuilder | Represents a NXOpen::Tooling::InitProjBuilder To create a new instance of this class, use NXOpen::Tooling::InitProjCollection::CreateInitProjBuilder Default values |
| InitProjCollection | Represents a collection of InitProj To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InitProjectBuilder | Mold Wizard initialize project builder To create a new instance of this class, use NXOpen::Tooling::InitProjectCollection::CreateBuilder Default values |
| InitProjectCollection | Represents a collection of InitProject builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InsertAuxiliaryBuilder | PDW insert auxiliary builder to design various auxiliaries of insert group To create a new instance of this class, use NXOpen::Tooling::InsertAuxiliaryCollection::CreateInsertAuxiliaryBuilder Default values |
| InsertAuxiliaryCollection | Creates a NXOpen::Tooling::InsertAuxiliaryBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| InsertEditToolsBuilder | Represents a NXOpen::Tooling::InsertEditToolsBuilder which is used to copy or delete the insert edit |
| IntermediateStageBuilder | Represents a NXOpen::Tooling::IntermediateStageBuilder builder |
| IntermediateStageCollection | Creates a NXOpen::Tooling::IntermediateStageBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| LayoutBuilder | Represents a Tooling::LayoutBuilder builder To create a new instance of this class, use NXOpen::Tooling::MWLayoutCollection::CreateLayoutBuilder Default values |
| LayoutManagementBuilder | Layout Management Builder of Engineering Die Wizard To create a new instance of this class, use NXOpen::Tooling::LayoutManagementCollection::CreateLayoutManagementBuilder Default values |
| LayoutManagementCollection | Creates a NXOpen::Tooling::LayoutManagementBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| LayoutRepositionBuilder | Represents a Tooling::LayoutRepositionBuilder builder To create a new instance of this class, use NXOpen::Tooling::MWLayoutCollection::CreateLayoutRepositionBuilder Default values |
| LsdynaFormAnalysisResultDisplayBuilder | Represents a Ly-Dyna Formability Analysis - Result Display builder To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateLsdynaFormAnalysisResultDisplayBuilder Default values |
| LsdynaGeometryPreparationBuilder | Stamping Die LS-Dyna integration draw geometry preprare builder |
| LsdynaKfileGeneratorBuilder | Represents LS-Dyna K file builder - K file generator builder To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateLsdynaKfileGeneratorBuilder Default values |
| ManufacturingGeometryBuilder | Represents a builder to be used to create manufacturing geometry |
| ManufacturingGeometryCollection | Represents a collection of Manufacturing Geometry builder |
| iterator | Iterator for accessing the contents of the collection |
| MoldCsysBuilder | Mold Wizard MoldCsys project builder To create a new instance of this class, use NXOpen::Tooling::MoldCsysCollection::CreateMoldCsysBuilder Default values |
| MoldCsysCollection | Creates a NXOpen::Tooling::MoldCsysCollection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MoldDesign | Represents an Mold Design |
| MoldDesignCollection | Represents a collection of Mold Design |
| iterator | Iterator for accessing the contents of the collection |
| MoldFeatureRecognitionBuilder | Represents a NXOpen::Tooling::MoldFeatureRecognitionBuilder builder To create a new instance of this class, use NXOpen::Tooling::MoldwizardManager::CreateMoldFeatureRecognitionBuilder Default values |
| MoldFillingBuilder | Builder used to add a gate/runner standard part from fill library, it returns NULL |
| MoldInsertBuilder | Mold Wizard mold insert management builder To create a new instance of this class, use NXOpen::Tooling::MoldInsertCollection::CreateMoldInsertBuilder Default values |
| MoldInsertCollection | Creates a MoldInsertCollection class To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MoldProcessBuilder | Represents a Tooling::MoldProcessBuilder builder To create a new instance of this class, use NXOpen::Tooling::MoldProcessCollection::CreateMoldProcessBuilder Default values |
| MoldProcessCollection | Represents a collection of Mold Process To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MoldwizardManager | Provides create builder methods for Moldwizard |
| MotionSimulationBuilder | Represents a NXOpen::Tooling::MotionSimulationBuilder to support dynamic interference check |
| MotionSimulationCollection | Represents a collection of MotionSimulation |
| iterator | Iterator for accessing the contents of the collection |
| MWCopySheetsBuilder | Builder for copying sheets in the Mold Wizard application To create a new instance of this class, use NXOpen::Tooling::MWCopySheetsCollection::CreateBuilder Default values |
| MWCopySheetsCollection | Represents a collection of MWCopySheets builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| MWDefineRegionsBuilder | The MWDefineRegions builder To create a new instance of this class, use NXOpen::Tooling::MWDefineRegionsCollection::CreateBuilder Default values |
| MWDefineRegionsCollection | Represents a collection of MWDefineRegions builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MWDefineSheetsBuilder | Builder for defining sheets in Mold Wizard To create a new instance of this class, use NXOpen::Tooling::MWDefineSheetsCollection::CreateBuilder Default values |
| MWDefineSheetsCollection | Represents a collection of MWDefineSheets builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MWDesignGuideLinesBuilder | The builder for designing guide lines in Mold Wizard |
| MWDesignGuideLinesCollection | Represents a collection of MWDesignGuideLines builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| MWDesignPartingSurfaceBuilder | The builder for designing parting surface in Mold Wizard |
| MWDesignPartingSurfaceCollection | Represents a collection of MWDesignPartingSurface builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| MWLayoutCollection | Creates Mold Wizard layout collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MWMoldedPartValidationBuilder | Represents a builder to be used to perform Molded Part Validation analysis |
| MWMoldedPartValidationManager | Represents a manager of the MWMoldedPartValidation builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| MWPartingManagerBuilder | Builder for the Parting Manager in the Mold Wizard application To create a new instance of this class, use NXOpen::Tooling::MWPartingManagerCollection::CreateBuilder Created in NX7.5.0 |
| MWPartingManagerCollection | Represents a collection of MWPartingManager builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| MWSearchRegionBuilder | The Search Region builder is for defining a region by searching the region faces given a set of seed faces and boundary edges |
| MWSearchRegionCollection | Represents a collection of MWSearchRegion builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| MWTraversePartingLinesBuilder | Builder for creating parting lines by traversing in the Mold Wizard application To create a new instance of this class, use NXOpen::Tooling::MWTraversePartingLinesCollection::CreateBuilder Created in NX7.5.0 |
| MWTraversePartingLinesCollection | Represents a collection of the MWTraversePartingLines builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ObjectAttributeManagementBuilder | Tooling builder to assign and edit attributes of objects To create a new instance of this class, use NXOpen::Tooling::ObjectAttributeManagementCollection::CreateObjectAttributeManagementBuilder Default values |
| ObjectAttributeManagementCollection | Creates a NXOpen::Tooling::ObjectAttributeManagementBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX9.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| OffsetCurve3DBuilder | Represents a NXOpen::Tooling::OffsetCurve3DBuilder builder which implements offset curves along a direction with offset distance in three dimension |
| PiercingInsertBuilder | Represents piercing insert builder |
| PiercingInsertCollection | Creates a NXOpen::Tooling::PiercingInsertBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PiercingInsertMiniToolsBuilder | Represents piercing insert mini tools builder |
| PocketBuilder | Mold Wizard pocket management builder To create a new instance of this class, use NXOpen::Tooling::PocketCollection::CreatePocketBuilder Default values |
| PocketCollection | Creates a NXOpen::Tooling::PocketBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| PrebendBuilder | Represents a NXOpen::Tooling::PrebendBuilder builder to divide bend faces |
| ProfileSplitBuilder | The ProfileSplit builder To create a new instance of this class, use NXOpen::Tooling::ProfileSplitCollection::CreateProfileSplitBuilder Created in NX6.0.0 |
| ProfileSplitCollection | Represents a collection of ProfileSplit builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ProgressiveDieManager | Provides create builder methods for Progressive Die |
| PunchInsertBuilder | Represents punch insert builder |
| QuickDatumCsysBuilder | Represents a NXOpen::Tooling::QuickDatumCsysBuilder builder |
| QuickQuotationBuilder | Progressive Die Wizard builder to create quick quotation |
| QuickQuotationCollection | Creates a NXOpen::Tooling::QuickQuotationBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ReferenceBlendBuilder | The ReferenceBlend builder To create a new instance of this class, use NXOpen::Tooling::ReferenceBlendCollection::CreateReferenceBlendBuilder Created in NX7.0.0 |
| ReferenceBlendCollection | Creates reference blend collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ReferenceCopyBuilder | Represents a NXOpen::Tooling::ReferenceCopyBuilder builder |
| ReliefDesignBuilder | Represents a NXOpen::Tooling::ReliefDesignBuilder Relief Design is to cut relief pocket for forming region |
| ReliefDesignCollection | Creates a NXOpen::Tooling::ReliefDesignBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| RemoveHolesBuilder | Remove Hole is used to patch holes for a solid body |
| RenameAndExportComponentBuilder | Creates rename and export component builder for progressive die |
| ReplaceSolidBuilder | Represents a replace solid operation |
| ReplaceSolidCollection | Creates ReplaceSolidBuilder collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ReusableObject | Represents a NXOpen::Tooling::ReusableObject To create a new instance of this class, use NXOpen::Tooling::ToolingManager::CreateReusableObject Created in NX7.5.2 |
| ReusableObjectManager | Represents a collection of ReusableObjects To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| ReusableObjectPasteBuilder | Represents a NXOpen::Tooling::ReusableObjectPasteBuilder Use the NXOpen::Tooling::ReusableObjectManager class to create a ReusableObjectPasteBuilder |
| ReusablePocketBuilder | Reusable pocket builder |
| ReusablePocketCollection | Represents a collection of ReusablePocketBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| ReusePositioningObjectBuilder | Represents a NXOpen::Tooling::ReusePositioningObjectBuilder Use the NXOpen::Tooling::ReusableObjectManager class to create a ReusePositioningObjectBuilder |
| Runner | Represents a runner feature To create or edit an instance of this class, use NXOpen::Tooling::RunnerBuilder Created in NX11.0.0 |
| RunnerBuilder | Mold Wizard runner management builder, select curves as runner guide, choose section type and edit section parameters, optional choose boolean type to create runner channel |
| RunnerCollection | Represents a collection of Runner To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| RunSimulationBuilder | Represents a NXOpen::Tooling::RunSimulationBuilder to animate the model, analyze the collision and reference |
| ScrapDesignBuilder | Represents a scrap design builder To create a new instance of this class, use NXOpen::Tooling::ScrapDesignCollection::CreateScrapDesignBuilder Default values |
| ScrapDesignCollection | Represents a collection of ScrapDesign To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SectionLineCreationBuilder | Represents a NXOpen::Tooling::SectionLineCreationBuilder which is used to create or edit the section line creation |
| SelectReuseLibraryItemBuilder | Select a part from the reuse library Created in NX9.0.0 |
| SelectReuseLibraryListBuilder | Select a list of objects from the reuse library Created in NX9.0.0 |
| SelectReuseLibraryListItemBuilder | Select reuse library list item Created in NX9.0.0 |
| SelectReuseLibraryListItemBuilderList | Represents a list of objects |
| SetPressModelBuilder | Represents a Tooling::SetPressModelBuilder to set and load the press model |
| SheetMetalFeatureRecognitionBuilder | Represents a NXOpen::Tooling::SheetMetalFeatureRecognitionBuilder builder To create a new instance of this class, use NXOpen::Tooling::MoldwizardManager::CreateSheetMetalFeatureRecognitionBuilder Created in NX11.0.1 |
| ShimBuilder | Shim Builder of PDW and EDW |
| ShimInnerProfileSetBuilder | This is a seed block of set list |
| ShimInnerProfileSetBuilderList | Represents a list of objects |
| SIZERCollection | Represents a collection of SIZER To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| SIZERExportBuilder | Exports input parameters for motor selection to SIZER drive design to support the sizing, configuration, and selection of drive components |
| MCDMechanicalData | Defines the mechanical data in MCD mode |
| MechanicalData | Defines the mechanical data in Motion mode |
| SIZERImportBuilder | Imports results for motor selection from SIZER drive design based on the sizing, configuration, and selection of drive components |
| SlugRetentionBuilder | Represents a NXOpen::Tooling::SlugRetentionBuilder which is used to create the Slug Retention |
| SmartScrewUpdateBuilder | Smart Screw Update of MW, PDW and EDW |
| SolidPatchBuilder | Represents a builder to be used to create a solid patch |
| SolidPatchCollection | Represents a collection of SolidPatch builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SpecialFormingBuilder | Creates special forming insert builder for progressive die |
| SpecialPiercingInsertBuilder | Creates special piercing insert for progressive die.No entity is returned |
| SpecifyBaffleBuilder | Represents a builder to be used to create specify baffle |
| SpecifyBaffleCollection | Represents a collection of Specify Baffle builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SpecifyCircuitBuilder | Represents a builder to be used to create specify circuit |
| SpecifyCircuitCollection | Represents a collection of Specify Circuit builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SpindleSliderBuilder | Represents a Tooling::SpindleSliderBuilder to create a spindle slider To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateSpindleSliderBuilder Created in NX10.0.2 |
| SplitInsertBuilder | Creates split insert builder for progressive die |
| SplitSolidBuilder | Represents a builder to be used to split a solid with geometry tools |
| SplitSolidCollection | Creates SplitSolid builder collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SpreadsheetData | Represents the spreadsheet data which could be standalone spreadsheet file with special format or be the spreadsheet data from part family template part, the latter format will not have any other data except the name and value in class NXOpen::Tooling::SpreadsheetDataParameter , that means it might not return any result in some methods such as "GetDefinedAttributesExpressions" |
| SpreadsheetDataParameter | Represents parameter in the spreadsheet |
| StandardPartBatchData | Represents the standard part batch data |
| StandardPartBuilder | Represents a builder to be used to create Mold Wizard Standard Part |
| StandardPartCollection | Creates a StandardPartCollection class To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| StandardPartData | Represents the standard part client data |
| StandardPartPositionBuilder | Represents a StandardPartPositionBuilder to add or edit a standard part in the selected plane with specified position |
| StandardPartPositionCollection | Creates a StandardPartPositionCollection class To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| StockSizeBuilder | Represents a Tooling::StockSizeBuilder builder |
| StockSizeCollection | Represents a collection of StockSize To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| StripLayoutBuilder | Represents a NXOpen::Tooling::StripLayoutBuilder This class is for Strip Layout Design UI To create a new instance of this class, use NXOpen::Tooling::StripLayoutCollection::CreateStripLayoutBuilder Created in NX6.0.0 |
| StripLayoutCollection | Contains the create functions for builders |
| iterator | Iterator for accessing the contents of the collection |
| StripLayoutStationInformationBuilder | Strip Layout Process Description Builder of Tooling |
| StripperVentingBuilder | Stripper Venting Builder of PDW and EDW |
| SubInsertBuilder | The SubInsert builder To create a new instance of this class, use NXOpen::Tooling::SubInsertCollection::CreateSubInsertBuilder Default values |
| SubInsertCollection | Creates SubInsert builder collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ToolingDrawingCollection | Creates a NXOpen::Tooling::CompDrawingBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ToolingManager | Contains the collection objects for creating and iterating over Reuse Library objects |
| ToolingSession | Represents Tooling session To obtain an instance of this class, refer to NXOpen::Session Created in NX8.0.0 |
| TraverseLoopBuilder | The builder class for Traverse Loop component which assists you to select or traverse a string of adjacent curves or edges |
| TraverseLoopCollection | Represents a collection of TraverseLoopbuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| TrimMoldComponentsBuilder | Represents a builder to be used to create Mold Wizard trim mold components |
| TrimMoldComponentsCollection | Creates a TrimMoldComponentsCollection class To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| TrimRegionBuilder | Mold Wizard trim region management builder, trims a body to a boundary of edges, curves or bodies |
| TrimRegionCollection | Represents a collection of Trim Region To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| TrimSolidBuilder | Mold Wizard trim solid management builder, trims bounding box body with region, subtract bounding box with workpiece or keep region and box |
| TrimSolidCollection | Represents a collection of Trim Solid To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| UndersizeBuilder | Represents a NXOpen::Tooling::UndersizeBuilder To create a new instance of this class, use NXOpen::Tooling::UndersizeCollection::CreateUndersizeBuilder Default values |
| UndersizeCollection | Creates a undersize builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| UnfoldingSimulationBuilder | Unfolding Simulation Builder of PDW and EDW |
| UniversalUnformBuilder | Represents a NXOpen::Tooling::UniversalUnformBuilder builder |
| UnusedFileManagementBuilder | Represents a NXOpen::Tooling::UnusedFileManagementBuilder Unused File Management is to manage the unused files of the project |
| UnusedFileManagementCollection | Creates a NXOpen::Tooling::UnusedFileManagementCollection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX7.5.0 |
| iterator | Iterator for accessing the contents of the collection |
| UserDefinedMotionBuilder | Represents a NXOpen::Tooling::UserDefinedMotionBuilder to create user defined motion, which contains linear and rotary motion To create a new instance of this class, use NXOpen::Tooling::ProgressiveDieManager::CreateUserDefinedMotionBuilder Default values |
| ValidCheckBuilder | This is the JA builder for static interference check To create a new instance of this class, use NXOpen::Tooling::ValidCheckCollection::CreateValidCheckBuilder Default values |
| ValidCheckCollection | Represents a collection of ValidCheck To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| WallThicknessCheckerBuilder | Represents a builder to be used to perform wall thickness analysis |
| WallThicknessCheckerManager | Represents the manager of the WallThicknessChecker builder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| WireHoleBuilder | Represents a NXOpen::Tooling::WireHoleBuilder This class is for Wire Hole Design UI To create a new instance of this class, use NXOpen::Tooling::WireHoleCollection::CreateWireHoleBuilder Default values |
| WireHoleCollection | Creates a NXOpen::Tooling::WireHoleBuilder To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| WorkflowManagementCollection | Creates a Workflow Management Collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX8.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| WorkpieceBuilder | Mold Wizard work piece builder To create a new instance of this class, use NXOpen::Tooling::WorkpieceCollection::CreateWorkpieceBuilder Default values |
| WorkpieceCollection | Creates a Workpiece Collection To obtain an instance of this class, refer to NXOpen::Tooling::ToolingManager Created in NX6.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| UF | Provides classes and interfaces to the UF API |
| UIStyler | Provides classes and interfaces for User Interface Styler |
| Attachment | Represents an Attachment for UI Styler Created in NX5.0.0 |
| BitMap | Represents a Bit Map for UI Styler |
| ButtonLayout | Represents a Button Layout for UI Styler |
| CollapsibleGroup | Represents a Collapsible Group for UI Styler Created in NX5.0.0 |
| ColorTool | Represents a ColorTool for UI Styler |
| Dialog | Represents a DialogItem for UI Styler |
| DialogItem | Represents a DialogItem for UI Styler |
| FileOperationData | Represents a FileOperationData for UI Styler Created in NX5.0.0 |
| GroupBox | Represents a GroupBox for UI Styler |
| IntegerItem | Represents a Integer for UI Styler |
| IntegerScale | Represents a IntegerScale for UI Styler Created in NX5.0.0 |
| LabelItem | Represents a Label for UI Styler |
| MultiSelectList | Represents a MultiSelectList for UI Styler Created in NX5.0.0 |
| MultiTextBox | Represents a MultiTextBox for UI Styler |
| OptionMenu | Represents a OptionMenu for UI Styler |
| OptionToggle | Represents a OptionToggle for UI Styler Created in NX5.0.0 |
| PageSwitchData | Represents a PageSwitchData for UI Styler Created in NX5.0.0 |
| PropertyPage | Represents a PropertyPage for UI Styler Created in NX5.0.0 |
| PushButton | Represents a PushButton for UI Styler Created in NX5.0.0 |
| RadioBox | Represents a RadioBox for UI Styler Created in NX5.0.0 |
| RealItem | Represents a Real for UI Styler Created in NX5.0.0 |
| RealScale | Represents a RealScale for UI Styler Created in NX5.0.0 |
| RowColumn | Represents a RowColumn for UI Styler Created in NX5.0.0 |
| ScrolledWindow | Represents a ScrolledWindow for UI Styler Created in NX5.0.0 |
| SelectionBox | Represents a SelectionBox for UI Styler Created in NX5.0.0 |
| Separator | Represents a Separator for UI Styler Created in NX5.0.0 |
| SingleSelectList | Represents a SingleSelectList for UI Styler Created in NX5.0.0 |
| StringItem | Represents a StringItem for UI Styler |
| Styler | Represents a Uistyler for UI Styler To obtain an instance of this class, refer to NXOpen::UI Created in NX5.0.0 |
| StylerEvent | Represents a StylerEvent Created in NX5.0.0 |
| StylerItem | Represents a Styler Item Created in NX5.0.0 |
| TabControl | Represents a Tab Control for UI Styler |
| Toggle | Represents a Toggle for UI Styler |
| ToolPalette | Represents a ToolPalette for UI Styler Created in NX5.0.0 |
| WideString | Represents a WideString for UI Styler Created in NX5.0.0 |
| UserDefinedObjects | Provides classes and interfaces for User Defined Objects (UDOs) |
| UserDefinedClass | JA interface for the UserDefinedClass object To create a new instance of this class, use NXOpen::UserDefinedObjects::UserDefinedClassManager::NewUserDefinedClass Created in NX5.0.0 |
| UserDefinedClassManager | JA interface for the UserDefinedClassManager object To obtain an instance of this class, refer to NXOpen::Session Created in NX5.0.0 |
| UserDefinedDisplayEvent | Implements the Display Event Object for UDO's Created in NX5.0.0 |
| UserDefinedEvent | Implements the Event Object for UDO's Created in NX5.0.0 |
| UserDefinedLinkEvent | Implements the Display Event Object for UDO's Created in NX5.0.0 |
| UserDefinedObject | JA interface for the UserDefinedObject object Created in NX5.0.0 |
| LinkDefinition | Contains the linked object and it's status along with the type of link |
| UserDefinedObjectDisplayContext | This class is used to display User Defined Objects Created in NX5.0.0 |
| UserDefinedObjectManager | This class creates and manages UserDefinedObjects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX5.0.0 |
| LinkedUdoDefinition | Used to define a link to a UserDefinedObject |
| UserDefinedTemplate | Provides classes and interfaces for User Defined Template |
| Collection | Represents a collection of user defined template To obtain an instance of this class, refer to NXOpen::Part Created in NX10.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Instantiation | Represents an User Defined Template Instantiation object To create or edit an instance of this class, use NXOpen::UserDefinedTemplate::InstantiationBuilder Created in NX10.0.0 |
| InstantiationBuilder | Represents a NXOpen::UserDefinedTemplate::InstantiationBuilder To create a new instance of this class, use NXOpen::UserDefinedTemplate::Collection::CreateInstantiationBuilder Created in NX10.0.0 |
| Utilities | Provides classes and interfaces for Utilities |
| Validate | Provides classes and interfaces for Validation Utilities |
| CheckerNode | Represents a checker that validator will use to check against part node |
| Override | Represents a NXOpen::Validate::Override object |
| OverrideBuilder | Represents a NXOpen::Validate::Override builder To create a new instance of this class, use NXOpen::Validate::ResultObject::CreateOverrideBuilder Default values |
| Parser | Represents a NX NXOpen::Validate::Parser |
| PartNode | Represents a part file that validator will check against |
| Requirement | Represents a NXOpen::Validate::Requirement object |
| RequirementBuilder | Represents a NXOpen::Validate::Requirement builder To create a new instance of this class, use NXOpen::Validate::RequirementCollection::CreateRequirementBuilder Default values |
| RequirementCheck | Represents an NX NXOpen::Validate::RequirementCheck object |
| RequirementCheckCollection | Represents an NX NXOpen::Validate::RequirementCheckCollection object |
| iterator | Iterator for accessing the contents of the collection |
| RequirementCollection | Represents an NX NXOpen::Validate::RequirementCollection object |
| iterator | Iterator for accessing the contents of the collection |
| ResultObject | Represents a check-mate result object |
| ValidationManager | Represents an object that manages validator and parser associated instance objects |
| XmlComparator | Provides a generic comparator for finding differences between two XML format files |
| Options | Represents config options in comparison For example: |
| VectorArithmetic | Provides classes and interfaces for Vector Arithmetic |
| VisualReporting | Provides classes and interfaces for Visual Reporting |
| Classifier | A Classifier within a NXOpen::VisualReporting::Rule |
| Condition | A Condition within a NXOpen::VisualReporting::Rule |
| GroupLabel | A group label corresponds to a group of objects in the results of an applied NXOpen::VisualReporting::VisualReport |
| Property | A property within either a NXOpen::VisualReporting::Rule or a NXOpen::VisualReporting::Condition , or used as referenced property information for the report |
| ResultCategory | A result category within a NXOpen::VisualReporting::VisualReport |
| Rule | A rule within a NXOpen::VisualReporting::VisualReport |
| SpecifyDateBuilder | Represents a Specify Date Builder To create a new instance of this class, use NXOpen::VisualReporting::VisualReportManager::CreateSpecifyDateBuilder Created in NX8.0.0 |
| UnmatchedResultCategory | An unmatched result category within a NXOpen::VisualReporting::VisualReport |
| VisualReport | A visual report can be activated by the NXOpen::VisualReporting::VisualReportManager to apply colors to objects in the graphics window |
| VisualReportBuilder | A Builder for creating and editing NXOpen::VisualReporting::VisualReport s |
| VisualReportCollection | A collection of visual reports |
| iterator | Iterator for accessing the contents of the collection |
| VisualReportExplorer | The Explorer of the results of a visual report |
| VisualReportManager | A manager for load, creation and activation of visual reports |
| Weld | Provides classes and interfaces for Weld |
| AutoPoint | This class will automatically create weld points from selected components To create or edit an instance of this class, use NXOpen::Weld::AutoPointBuilder Created in NX6.0.0 |
| AutoPointBuilder | Represents a NXOpen::Weld::AutoPointBuilder builder To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateAutoPointBuilder Default values |
| AutoWeldSymbolsBuilder | Represents a NXOpen::Weld::AutoWeldSymbolsBuilder builder To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateAutoWeldSymbolsBuilder Created in NX8.0.0 |
| CharacteristicsBuilder | This builder allows you to define the attribute values to be set on the output of the weld feature |
| CharacteristicsSelectionBuilder | This builder allows you to define the attribute values to be set on the output of the weld feature |
| CharacteristicsValueBuilder | The object containing the information about the attribute to be placed on the output of the weld feature |
| CompoundWeld | Represents a compound weld feature |
| CompoundWeldBuilder | Represents a NXOpen::Weld::CompoundWeld builder |
| ConnectedFaceFinderBuilder | Represents a builder to run the Connected Face Finder operation |
| ConnectedPart | Represents weld connected part to customize the retrieval of connected part information |
| ConnectionFinderBuilder | Represents a builder to display, manage, delete, and allow the user to reparent face information for the weld objects |
| CustomManager | Represents weld interface to customize the creation of welding joint features |
| iterator | Iterator for accessing the contents of the collection |
| DatumCommonBuilder | Used to create or edit a NXOpen::Weld::DatumSurface or NXOpen::Weld::DatumPin feature |
| DatumIconBuilder | Represents a NXOpen::Weld::DatumIconBuilder class used to control the part navigator icon for Datum Pin and Surface Locators |
| DatumPin | Represents a Weld Datum Pin feature To create or edit an instance of this class, use NXOpen::Weld::DatumPinBuilder Created in NX8.5.0 |
| DatumPinBuilder | Used to create or edit a NXOpen::Weld::DatumPin feature |
| DatumSurface | Represents a Weld Datum Surface feature To create or edit an instance of this class, use NXOpen::Weld::DatumSurfaceBuilder Created in NX8.5.0 |
| DatumSurfaceBuilder | Used to create or edit a NXOpen::Weld::DatumSurface feature |
| EasyPatternBuilder | Represents the easy pattern builder |
| EdgePrep | Represents a Weld Edge Prep feature To create or edit an instance of this class, use NXOpen::Weld::EdgePrepBuilder Created in NX8.0.0 |
| EdgePrepBuilder | A builder used to create or edit a NXOpen::Weld::EdgePrep feature |
| EdgePrepValuesBuilder | Used to view or edit the values used to define the welding joint and edge preparation |
| ExportWeldBuilder | Represents a ExportWeldBuilder class To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateExportWeldBuilder Default values |
| ExportWeldJointBuilder | Represents exporting weld joints |
| Extract | Represents a Linked Feature created in the Weld Assistant |
| Fill | Represents a Weld Fill feature To create or edit an instance of this class, use NXOpen::Weld::WeldFillBuilder Created in NX7.5.0 |
| Fillet | Represents a Weld Fillet Feature |
| FilletBuilder | Represents a NXOpen::Weld::Fillet builder |
| Groove | Represents a WeldGroove feature |
| GrooveBuilder | Represents a Groove Weld feature To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateWeldGrooveBuilder Created in NX5.0.0 |
| IFeature | Represents a Weld Assistant or Structure Welding created feature Created in NX11.0.0 |
| InformationBuilder | This class is used by "Fabrication Information" to output fabrication objects information |
| JointExitBuilder | Used to set custom edge preparation parameters of a NXOpen::Weld::WeldJoint feaure |
| FilletSizes | The structure for defining fillet weld lengths |
| JointItemBuilder | Used to create or edit a Weld::WeldJoint feature |
| JointItemBuilderList | Represents a list of objects |
| Jointmark | Represents a Weld Jointmark Feature |
| JointmarkBuilder | Represents a NXOpen::Weld::Jointmark builder To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateJointmarkBuilder Default values |
| JointmarkElement | Represents a Weld.JointmarkElement Feature |
| JointmarkFaceSetsBuilder | Used to create or edit a set of faces for Jointmark To create a new instance of this class, use NXOpen::Weld::JointmarkBuilder::NewFaceSets Created in NX9.0.0 |
| JointmarkFaceSetsBuilderList | Represents a list of objects |
| JointmarkGuideBuilder | Used to create or edit a guide curve for Jointmark |
| JointmarkGuideBuilderList | Represents a list of objects |
| JointmarkPointsBuilder | Used to create or edit a point in the list of points for Jointmark To create a new instance of this class, use NXOpen::Weld::JointmarkBuilder::NewPoints Created in NX9.0.0 |
| JointmarkPointsBuilderList | Represents a list of objects |
| LocatorReferenceBuilder | This class is used by "Locator Reference" to add the additional component for a weld datum DF |
| LogInfo | Represents entity and its log message Created in NX7.5.0 |
| PlugSlot | Create a PlugSlot feature for Weld To create or edit an instance of this class, use NXOpen::Weld::PlugSlotBuilder Created in NX8.0.0 |
| PlugSlotBuilder | Represents a NXOpen::Weld::PlugSlot builder To create a new instance of this class, use NXOpen::Weld::WeldManager::CreatePlugSlotBuilder Default values |
| PointMark | Represents a Weld PointMark Feature |
| PointMarkBuilder | Used to create or edit a NXOpen::Weld::PointMark feature |
| PointMarkPoint | Represents a Weld.PointMarkPoint Feature |
| PointMarkPointBuilder | Used to create or edit a point in the list of points for Jointmark To create a new instance of this class, use NXOpen::Weld::PointMarkBuilder::NewPointsOverride Created in NX10.0.0 |
| SelectDatumPin | Represents a single object selection |
| SelectDatumSurface | Represents a single object selection |
| StructureWeldBuilder | This class is used to create or edit the information shared among all Structure Weld builders |
| SurfaceWeld | Represents a surface weld feature To create or edit an instance of this class, use NXOpen::Weld::SurfaceWeldBuilder Created in NX9.0.0 |
| SurfaceWeldBuilder | Use to create or edit a NXOpen::Weld::SurfaceWeld feature |
| Transform | Represents a Weld Transform Feature |
| TransformBuilder | Represents a NXOpen::Weld::TransformBuilder builder To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateTransformBuilder Created in NX11.0.1 |
| UserDefinedWeld | Represents a User Defined Weld feature |
| UserDefinedWeldBuilder | Represents a NXOpen::Weld::UserDefinedWeldBuilder builder |
| WeldAdvisorBuilder | Represents a weld advisor test To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateWeldAdvisorBuilder Created in NX7.5.0 |
| WeldBead | Represents a Weld Bead feature To create or edit an instance of this class, use NXOpen::Weld::WeldBeadBuilder Created in NX7.5.0 |
| WeldBeadBuilder | Used to create or edit a NXOpen::Weld::WeldBead feature |
| WeldBeadPathBuilder | Represents the path the bead shape will be swept along |
| WeldBeadPathBuilderList | Represents a list of objects |
| WeldBeadSizeBuilder | This builder is used to define the bead shape |
| WeldBeadSizeBuilderList | Represents a list of objects |
| WeldCpdUtils | Provides methods for access a WeldCpdUtils class object in NX |
| WeldFillBuilder | A builder used to create or edit a NXOpen::Weld::Fill feature |
| WeldFillStripBuilder | A builder used to create or edit a single strip of the NXOpen::Weld::WeldFillBuilder |
| WeldFillStripBuilderList | Represents a list of objects |
| WeldGroove | Represents a Weld Groove Feature To create or edit an instance of this class, use NXOpen::Weld::WeldGrooveBuilder Created in NX9.0.0 |
| WeldGrooveBuilder | Represents a NXOpen::Weld::WeldGroove builder To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateWeldGroove1Builder Default values |
| WeldImportBuilder | Creates Weld features by reading a csv file To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateImportBuilder Created in NX7.5.1 |
| WeldJoint | Represents a weld joint feature To create or edit an instance of this class, use NXOpen::Weld::WeldJointBuilder Created in NX8.0.0 |
| WeldJointBuilder | Used to create or edit a NXOpen::Weld::WeldJoint feature |
| JointMidPointData | Joint evaluation information at the mid point |
| WeldLabelBuilder | Create weld labels for multiple welds and BIW locators, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable |
| WeldManager | Manages weld features and assistant tools |
| iterator | Iterator for accessing the contents of the collection |
| WeldObjectBuilder | Represents a NXOpen::Weld::WeldObjectBuilder class used to collect welding objects created or edited from a command |
| FeatureInfo | Structure used to identify if each feature is newly created or edited |
| WeldPmiBuilder | Create PMI symbols for multiple structure welds, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable |
| WeldPoint | Represents a WeldPoint feature |
| WeldPointBuilder | Represents a Spot Weld feature To create a new instance of this class, use NXOpen::Weld::WeldManager::CreateWeldPointBuilder Default values |
| WeldPointExitBuilder | Represents a NXOpen::Weld::WeldPointExitBuilder class used to pass welding object from the Weld Point command to a user callback |
| FeatureDetails | Structure used to identify newly created, edited, and unused features |
| FeatureInfo | Structure used to identify newly created features |
| WeldPreferenceBuilder | Represents a NXOpen::Weld::WeldPreferenceBuilder builder To create a new instance of this class, use NXOpen::Weld::WeldManager::CreatePreferenceBuilder Default values |
| AcisExporter | Represents a AcisExporter to be used when importing the Acis Data This class is created using DexManager |
| AcisImporter | Represents a AcisImporter to be used when importing the Acis Data This class is created using DexManager |
| AnimationDesignerBaseValidator | Validator for a animation designer feature in a part |
| ApparentChainingRule | Represents a NXOpen::SelectionIntentRule that collects curves which appear connected or tangent connected in a particular drafting view |
| Arc | Represents an arc curve |
| ArcCollection | Represents a collection of arcs |
| iterator | Iterator for accessing the contents of the collection |
| ASCImporter | Represents a NXOpen::ASCImporter |
| AssembliesUtils | Contains various assembly utility methods To obtain an instance of this class, refer to NXOpen::Session Created in NX6.0.0 |
| AttributeIterator | This class is used to iterate over the user attributes of an object, with options to restrict or extend such searches Created in NX11.0.0 |
| AttributeManager | Provides methods for querying and updating attributes |
| AttributePropertiesBaseBuilder | Represents an NXOpen::AttributePropertiesBaseBuilder to be used for creating attributes |
| AttributePropertiesBuilder | Represents an NXOpen::AttributePropertiesBuilder |
| AttributeTemplatesBuilder | Represents an NXOpen::AttributeTemplatesBuilder to be used when creating attribute templates |
| AttrTypeKey | This class contains the factory methods for creating a AttrTypeKey |
| AutomaticTraceline | Represents an automatic traceline |
| Axis | Represents an NXOpen::Axis class |
| AxisCollection | Represents a collection of NXOpen::Axis |
| iterator | Iterator for accessing the contents of the collection |
| BaseCallback | A base class for all NXOpen callback classes |
| BasePart | Base class for an NX part |
| HistoryEventInformation | Contains part history event information |
| IncompleteStatus | Incomplete part return data |
| TransientStatus | Transient part return data |
| BasePropertyTable | Represents a property table |
| BaseSession | A base class for NXOpen session objects |
| BasicEffectivityBuilder | Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values |
| Body | Represents a Body |
| BodyCollection | Represents a collection of bodies in a part To obtain an instance of this class, refer to NXOpen::Part Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| BodyDumbRule | Represents a NXOpen::SelectionIntentRule that collects bodies without any intent i.e |
| BodyFacetsRule | Represents a NXOpen::FacetSelectionRule that collects all facets from a Face Body |
| BodyFeatureRule | Represents a NXOpen::SelectionIntentRule that collects all bodies created or modified by a feature |
| BodyGroupRule | Represents a NXOpen::SelectionIntentRule that collects all bodies of a group |
| BodyList | Represents a list of objects |
| BrushFacetsRule | Represents a NXOpen::FacetSelectionRule that collects facets with brush tool intent |
| Builder | A Builder is an object that is used to create and edit other objects |
| BunchFacetsOnFaceRule | Represents a NXOpen::FacetSelectionRule that collects all facets from a face or a NX faceted body |
| CaeObjectType | Represent options for CAE selection |
| Callback0 | Template base class for callbacks with no input arguments |
| Callback0Function | Template class for callbacks with no input arguments |
| Callback0List | Template class for callbacks with no input arguments |
| Callback0MemberFunction | Template class for callbacks with no input arguments that are member functions of a class |
| Callback1 | Template base class for callbacks with one input argument |
| Callback1Function | Template class for callbacks with one input argument |
| Callback1List | Template class for callbacks with one input argument |
| Callback1MemberFunction | Template class for callbacks with one input argument that are member functions of a class |
| Callback2 | Template base class for callbacks with two input arguments |
| Callback2Function | Template class for callbacks with two input arguments |
| Callback2List | Template class for callbacks with two input arguments |
| Callback2MemberFunction | Template class for callbacks with two input arguments that are member functions of a class |
| Callback3 | Template base class for callbacks with three input arguments |
| Callback3Function | Template class for callbacks with three input arguments |
| Callback3List | Template class for callbacks with three input arguments |
| Callback3MemberFunction | Template class for callbacks with three input arguments that are member functions of a class |
| Callback4 | Template base class for callbacks with four input arguments |
| Callback4Function | Template class for callbacks with four input arguments |
| Callback4List | Template class for callbacks with four input arguments |
| Callback4MemberFunction | Template class for callbacks with four input arguments that are member functions of a class |
| Callback5 | Template base class for callbacks with five input arguments |
| Callback5Function | Template class for callbacks with five input arguments |
| Callback5List | Template class for callbacks with five input arguments |
| Callback5MemberFunction | Template class for callbacks with five input arguments that are member functions of a class |
| Callback6 | Template base class for callbacks with six input arguments |
| Callback6Function | Template class for callbacks with six input arguments |
| Callback6List | Template class for callbacks with six input arguments |
| Callback6MemberFunction | Template class for callbacks with six input arguments that are member functions of a class |
| Callback7 | Template base class for callbacks with seven input arguments |
| Callback7Function | Template class for callbacks with seven input arguments |
| Callback7List | Template class for callbacks with seven input arguments |
| Callback7MemberFunction | Template class for callbacks with seven input arguments that are member functions of a class |
| Callback8 | Template base class for callbacks with eight input arguments |
| Callback8Function | Template class for callbacks with eight input arguments |
| Callback8List | Template class for callbacks with eight input arguments |
| Callback8MemberFunction | Template class for callbacks with eight input arguments that are member functions of a class |
| CartesianCoordinateSystem | Represents a cartesian coordinate system To create a new instance of this class, use NXOpen::CoordinateSystemCollection::CreateCoordinateSystem Created in NX4.0.0 |
| Catiav4Creator | Represents a NXOpen::Catiav4Creator to be used when exporting the CATIA V4 Data This class is created using NXOpen::DexManager |
| Catiav4Importer | Represents a NXOpen::Catiav4Importer to be used when importing the CATIA V4 Data This class is created using NXOpen::DexManager |
| Catiav5Creator | Represents a NXOpen::Catiav5Creator to be used when exporting the CATIA V5 Data This class is created using NXOpen::DexManager |
| Catiav5Importer | Represents a NXOpen::Catiav5Importer to be used when importing the CATIA V5 Data This class is created using NXOpen::DexManager |
| CDF | Represents a NXOpen::CDF , which is a representation of an NX color palette |
| CGMBuilder | Represents a NXOpen::CGMBuilder to be used when exporting the Current Display or drawing sheets to a CGM |
| CGMImporter | Used to import a CGM file into the work part |
| ClipboardOperationsManager | Used to create importer objects |
| CollaborativeContentManager | Represents the manager for the various collaborative design contents and this class is usable only when NX is running in managed mode |
| CollaborativeDesign | A collaborative design is created in Teamcenter |
| CollaborativeDesignCollection | A collection of collaborative designs |
| iterator | Iterator for accessing the contents of the collection |
| ColorDefinition | Represents a NXOpen::ColorDefinition , which is a representation of one color on an NX color palette |
| ColorDefinitionRgb | Specifies rgb values for color |
| ColorManager | Contains functionality pertaining to colors To obtain an instance of this class, refer to NXOpen::BasePart Created in NX5.0.0 |
| ColorRegionRule | Represents a NXOpen::FacetSelectionRule that chains to collect all connected facets of same color |
| ColorWidth | Represents a NXOpen::ColorWidth used by NXOpen::WidthDefinition to define a custom width for each color |
| Conic | Represents a conic curve |
| ContentDefinition | Represents a class that defines the contents that will be pulled in to a subset |
| ConvergentFacet | Represents a facet from convergent topology |
| ConvertToFromReferenceBuilder | Represents a NXOpen::ConvertToFromReferenceBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateConvertToFromReferenceBuilder Created in NX5.0.0 |
| CoordinateSystem | Represents a coordinate system This is an abstract class Created in NX3.0.0 |
| CoordinateSystemCollection | Represents a collection of NXOpen::CoordinateSystem |
| iterator | Iterator for accessing the contents of the collection |
| Creator3MF | Represents a NXOpen::Creator3MF to be used when exporting the 3mf Data This class is created using NXOpen::DexManager |
| Curve | Represents a curve |
| CurveChainRule | Represents a NXOpen::SelectionIntentRule that collects end-to-end connected curves from the seed curve |
| CurveCollection | Represents a collection of NXOpen::Curve |
| iterator | Iterator for accessing the contents of the collection |
| CurveDumbRule | Represents a NXOpen::SelectionIntentRule that collects curves without any intent i.e |
| CurveFeatureChainRule | Represents a NXOpen::SelectionIntentRule that collects end-to-end connected curves from the feature of the seed |
| CurveFeatureRule | Represents a NXOpen::SelectionIntentRule that collects all curves created by a feature |
| CurveFeatureTangentRule | Represents a NXOpen::SelectionIntentRule that collects tangent connected curves from the feature of the seed |
| CurveGroupRule | Represents a NXOpen::SelectionIntentRule that collects all curves of a group |
| CurveTangentRule | Represents a NXOpen::SelectionIntentRule that collects tangent connected curves from the seed curve |
| CustomPopupMenu | Represents Custom Popup Menu Item class Created in NX6.0.4 |
| CustomPopupMenuHandler | Represents Custom Popup Menu Handler class Created in NX6.0.4 |
| CustomPopupMenuItem | Represents Custom Popup Menu Item class Created in NX6.0.4 |
| CustomWidth | Represents a NXOpen::CustomWidth used by NXOpen::WidthDefinition to define the three custom widths associated with each WidthDefinition |
| CutView | Represents a Cut View Cut Views may only be created via a Master Cut Builder |
| CutViewCollection | Represents a collection of NXOpen::CutView objects |
| iterator | Iterator for accessing the contents of the collection |
| CylindricalCoordinateSystem | Represents a cylindrical coordinate system To create a new instance of this class, use NXOpen::CoordinateSystemCollection::CreateCylindricalCoordinateSystem Created in NX4.0.0 |
| DataContainer | Represents a list of data |
| DateBuilder | Allows a date and/or time to be input or output via the DateItem builder |
| DateItemBuilder | This class stores a date and time |
| DateItemBuilderList | Represents a list of objects |
| DatumAxis | Represents a datum axis This object can not be created by KF it's the display objet of the datum axis Created in NX3.0.0 |
| DatumCollection | Represents a collection of datum geometry |
| iterator | Iterator for accessing the contents of the collection |
| DatumConstraint | Represents a constraint that specifies the location of a NXOpen::Features::DatumFeature |
| DatumPlane | Represents a datum plane This object can not be created by KF it's the display objet of the datum plane Created in NX3.0.0 |
| Decal | Represents a Material Texture decal pair This class is restricted to being called from a program running during an Interactive NX session |
| DexBuilder | This is an abstract class that provides the basic functionality common to all dex builders |
| DexManager | Methods to create Dex Builder objects |
| Direction | Represents a direction |
| DirectionCollection | Represents a collection of NXOpen::Direction |
| iterator | Iterator for accessing the contents of the collection |
| DisplayableObject | Base class for all objects that are displayable |
| DisplayManager | Represents an object to manage display settings |
| J3dColor | 3d interface color definition |
| J3dData | 3d interface structure |
| J3dMaterial | 3d interface material definition |
| DisplayModification | Represents changes to the display characteristics of an object |
| DraftingManager | Represents an object that manages drafting objects and member views |
| DraftPointDataCollection | This class contains the factory methods for creating a DraftPointData object |
| iterator | Iterator for accessing the contents of the collection |
| DrawingCompareManager | Represents an object that manages drawing compare |
| DrawingUtils | Contains various drawing utility methods To obtain an instance of this class, refer to NXOpen::Session Created in NX8.5.3 |
| DxfdwgCreator | Represents a NXOpen::DxfdwgCreator to be used when exporting the DXF/DWG Data This class is created using NXOpen::DexManager |
| DxfdwgImporter | Represents a NXOpen::DxfdwgImporter to be used when importing the DXF/DWG Data This class is created using NXOpen::DexManager |
| Edge | Represents an edge An edge is obtained from its parent NXOpen::Body Created in NX3.0.0 |
| EdgeBodyRule | Represents a NXOpen::SelectionIntentRule that collects all the edges of a body |
| EdgeBoundaryRule | Represents a NXOpen::SelectionIntentRule that collects all the edges of a face |
| EdgeChainRule | Represents a NXOpen::SelectionIntentRule that collects end-to-end connected edges from the body of the seed edge |
| EdgeDumbRule | Represents a NXOpen::SelectionIntentRule that collects edges without any intent i.e |
| EdgeFaceRule | Represents a NXOpen::SelectionIntentRule that collects all edges of a face |
| EdgeFeatureRule | Represents a NXOpen::SelectionIntentRule that collects all edges created or modified by a feature |
| EdgeIntersectRule | Represents a NXOpen::SelectionIntentRule that collects all intersection edges between a set of faces |
| EdgeMultipleSeedTangentRule | Represents a NXOpen::SelectionIntentRule that collects tangent connected edges from the body of the seed edge |
| EdgeSheetBoundaryRule | Represents a NXOpen::SelectionIntentRule that collects boundary edges of a sheet body |
| EdgeTangentRule | Represents a NXOpen::SelectionIntentRule that collects tangent connected edges from the body of the seed edge |
| EdgeVertexRule | Represents a NXOpen::SelectionIntentRule that collects the vertex edge and and its adjacent edges |
| EdgeVertexTangentRule | Represents a NXOpen::SelectionIntentRule that collects the vertex edge and the edges adjacent and tangent to it |
| EffectivityConditionBuilder | Represent a utility class to assign or edit discrete and range effectivity unit values in the context of a NXOpen::CollaborativeDesign |
| Ellipse | Represents an ellipse curve |
| EllipseCollection | Represents a collection of ellipses |
| iterator | Iterator for accessing the contents of the collection |
| EndCutBlockBuilder | Represents a End Cut Block Builder |
| EngineeringFunction | Contains Engineering Function methods To obtain an instance of this class, refer to NXOpen::Session Created in NX4.0.0 |
| ErrorInfo | Contains information about an error that occurred Created in NX3.0.0 |
| ErrorList | Represents a list of errors Created in NX3.0.0 |
| Expression | Represents an expression |
| ExpressionCollection | Represents a collection of expressions |
| iterator | Iterator for accessing the contents of the collection |
| ExpressionCollectorSet | An object that binds an expression with an entity section in the context of a list |
| ExpressionCollectorSetList | Represents a list of objects |
| ExpressionGroup | Represents an expression group |
| ExpressionGroupCollection | Represents a collection of expressions groups |
| iterator | Iterator for accessing the contents of the collection |
| ExpressionSectionSet | An object that binds an expression with an entity section in the context of a list |
| ExpressionSectionSetList | Represents a list of objects |
| ExternalFileReferenceAdapter | Represents a managed external file reference adapter object to communicate the external file reference information |
| Face | Represents a face Created in NX3.0.0 |
| FaceAdjacentRule | Represents a NXOpen::SelectionIntentRule that collects the faces adjacent to the seed face of a body |
| FaceAllBlendRule | Represents a NXOpen::SelectionIntentRule that collects all blend faces |
| FaceAndAdjacentFacesRule | Represents a NXOpen::SelectionIntentRule that collects both the seed face and all its adjacent faces |
| FaceBodyRule | Represents a NXOpen::SelectionIntentRule that collects all the faces of a body |
| FaceBossPocketFacesRule | Represents a NXOpen::SelectionIntentRule that collects all faces of a boss or pocket |
| FaceConnectedBlendRule | Represents a NXOpen::SelectionIntentRule that collects all connected blend faces |
| FaceDumbRule | Represents a NXOpen::SelectionIntentRule that collects faces without any intent i.e |
| FaceFacetsRule | Represents a NXOpen::FacetSelectionRule that collects all facets from a face or NX facet body |
| FaceFeatureRule | Represents a NXOpen::SelectionIntentRule that collects all faces created or modified by a feature |
| FaceMergedRibFacesRule | Represents a NXOpen::SelectionIntentRule that collects all merged rib faces |
| FaceRegionBoundaryRule | Represents a NXOpen::SelectionIntentRule that collects a region of faces that are tangent connected |
| FaceRegionRule | Represents a NXOpen::SelectionIntentRule that collects a region of faces |
| FaceRibFacesRule | Represents a NXOpen::SelectionIntentRule that collects all rib faces |
| FaceSlotFacesRule | Represents a NXOpen::SelectionIntentRule that collects all faces of a pocket |
| FaceTangentRule | Represents a NXOpen::SelectionIntentRule that collects tangent connected faces from the body of the seed face |
| FacetCollector | Represents collection of facets To create a new instance of this class, use NXOpen::FacetCollectorCollection::CreateCollector Created in NX12.0.0 |
| FacetCollectorCollection | This class contains the factory method for creating a facet collector |
| iterator | Iterator for accessing the contents of the collection |
| FacetSelectionRule | Represents a NXOpen::FacetSelectionRule facet collection rules |
| FacetSelectionRuleFactory | This class contains the factory methods for creating facet selection intent rules To obtain an instance of this class, refer to NXOpen::Part Created in NX12.0.0 |
| FeatureGeneralPropertiesBuilder | Represents a NXOpen::FeatureGeneralPropertiesBuilder to be used for modifying the names of features and general objects |
| FeatureIntersectionEdgesRule | Represents a NXOpen::SelectionIntentRule that collects the intersection edges of boolean like features |
| FeaturePointsRule | Represents a NXOpen::SelectionIntentRule that collects all points created by a feature |
| FeatureProcessBuilderStatus | Created in NX7.5.0 |
| FileNew | Represents a NXOpen::FileNew To create an instance of this class, use NXOpen::PartCollection::FileNew |
| FileNewTemplate | Represents a NXOpen::FileNewTemplate Use the NXOpen::FileNew to query objects of this class |
| FillBoundaryRule | Represents a NXOpen::FacetSelectionRule that collects flood filled facets without doing any check of facet's existence in current collection |
| FineBrushFacetsRule | Represents a NXOpen::FacetSelectionRule that collects facets with fine brush tool intent |
| FlatteningBuilder | Represents a FlatteningBuilder builder |
| FloodFillFacetsRule | Represents a NXOpen::FloodFillFacetsRule that collects flood filled facets |
| FollowFilletRule | Represents a NXOpen::SelectionIntentRule that collects curves/edges which are connected or tangent connected and follow onto and off an untrimmed fillet |
| FontCollection | Represents a collection of typographical fonts (for example, Arial, OldEnglish) To obtain an instance of this class, refer to NXOpen::BasePart Created in NX3.0.0 |
| FourPointSurfaceBuilder | Represents a four point sheet body builder To create a new instance of this class, use NXOpen::BodyCollection::CreateFourPointSurfaceBuilder Created in NX6.0.0 |
| GeneralScalarTable | Represents a General M x N table of scalar (real) values |
| GenericMeasure | Represents a single valued measurement Created in NX4.0.0 |
| Group | Represents a gateway group To create or edit an instance of this class, use NXOpen::GroupBuilder Created in NX5.0.0 |
| GroupBuilder | Represents a NXOpen::GroupBuilder To create a new instance of this class, use NXOpen::BasePart::CreateGatewayGroupBuilder Default values |
| HumanData | Represent the data used to create the human Created in NX4.0.0 |
| HumanHandsDialogBuilder | Dialog for creating and editing standalone/"disembodied" hand figures To create a new instance of this class, use NXOpen::Features::HumanBuilder::CreateHumanHandsDialogBuilder Default values |
| HumanHandShapeData | Represent hand shape data Created in NX4.0.0 |
| HumanPosturePrediction | Represent posture prediction object To create or edit an instance of this class, use NXOpen::HumanPosturePredictionBuilder Created in NX5.0.0 |
| HumanPosturePredictionBuilder | Represents a Human Posture Prediction Builder |
| HumanReachZone | Represents a human reach zone |
| Hyperbola | Represents a hyperbola curve |
| HyperbolaCollection | Represents a collection of hyperbolas |
| iterator | Iterator for accessing the contents of the collection |
| IAttributeSourceObjectBuilder | Represents an interface to perform various database operations on an array of NXOpen::NXObject |
| IBaseCurve | Represents something containing a two dimensional curve Created in NX4.0.0 |
| IBasePlane | Represents a Plane or Datum Plane Created in NX6.0.0 |
| IBody | Represents something containing a body Created in NX4.0.0 |
| ICurve | Represents something containing a two dimensional modeling curve Created in NX3.0.0 |
| IExternalFileReferencer | Represents an interface needed to be implemented by the application object which wants to establish an external file reference managed in Teamcenter |
| IFacet | Represents a facet |
| IFitTo | Represents something that can be supplied to View::FitToObjects Created in NX4.0.0 |
| IgesCreator | Represents a NXOpen::IgesCreator to be used when exporting the IGES Data This class is created using NXOpen::DexManager |
| IgesImporter | Represents a NXOpen::IgesImporter to be used when importing the IGES Data This class is created using NXOpen::DexManager |
| ILocation | Represents something that can be supplied to an location selection Created in NX4.0.0 |
| Importer | Base class for importing data into the work part |
| Importer3MF | Represents a NXOpen::Importer3MF to be used when importing 3MF Data This class is created using NXOpen::DexManager |
| ImportManager | Used to create importer objects |
| InferredConstraintsBuilder | Represents a NXOpen::InferredConstraintsBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateInferredConstraintsBuilder Created in NX5.0.0 |
| InferSnapType | Represent options for snap selection |
| InfiniteLine | Represents a infinite line curve |
| InfiniteLineCollection | Represents a collection of infinite lines |
| iterator | Iterator for accessing the contents of the collection |
| Information | Represents a class that provides methods for displaying information about part history, interpart parents and children, features, points, and other NX Objects |
| InterpartExpressionsBuilder | This class creates interpart expressions from the source part to the current work part via the naming rule defined |
| INXObject | Represents an interface from which most NXOpen classes inherit Created in NX3.0.0 |
| IOrientation | Represents something that can be supplied to an orientation selection Created in NX4.0.0 |
| IParameterizedSurface | Represents something containing a face Created in NX4.0.0 |
| IPlane | Represents an Plane class |
| IProfile | Represents something that can be supplied to a profile Created in NX4.0.0 |
| IReferenceAxis | Represents an object that could be used as a reference axis for a feature Created in NX3.0.0 |
| ISketchHelpedConstraint | Represents a sketch constraint that has a help point or help parameter |
| ISurface | Represents something containing a two dimensional surface Created in NX3.0.0 |
| ITableEditorDataProvider | Interface for providing basic data for a Table Editor block |
| ItemCacheMappedEntityBuilder | Generic journal methods for ItemCacheMappedEntityBuilder Not support KF |
| JournalManager | Represents the JournalManager which is used to query data about journals when recording and replaying journal files |
| JtCreator | Represents a NXOpen::JtCreator to be used when exporting the JT Data This class is created using NXOpen::PvtransManager |
| KFObject | Represents an KF object in the part |
| Layout | Represents a layout |
| LayoutCollection | Represents a collection of layouts |
| iterator | Iterator for accessing the contents of the collection |
| LayoutDefinition | Represents the definition of a layout |
| LicenseManager | Provides utility methods for managing licenses |
| LicenseBundle | License bundle structure containing name of license bundle and number of licenses checked out of the bundle |
| Light | Represents a light source |
| LightCollection | Represents a collection of NXOpen::Light s |
| iterator | Iterator for accessing the contents of the collection |
| Line | Represents a line curve |
| LineCollection | Represents a collection of lines |
| iterator | Iterator for accessing the contents of the collection |
| LineColorFontWidthBuilder | Represent a NXOpen::LineColorFontWidthBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| LineFontBuilder | Represent a NXOpen::LineFontBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| LineWidthBuilder | Represents a NXOpen::LineWidthBuilder |
| LinkedMirrorPartAttributeEditData | JA interface for LinkedMirrorPartAttributeEditData object This cannot be created Created in NX8.5.0 |
| LinkedMirrorPartAttributeEditEvent | JA interface for LinkedMirrorPartAttributeEditEvent object This cannot be created Created in NX8.5.0 |
| LinkedMirrorPartBuilder | Builder class of LinkedMirrorPartBuilder To create a new instance of this class, use NXOpen::PartCollection::CreateLinkedMirrorPartBuilder Default values |
| LinkedMirrorPartEntityMapData | JA interface for LinkedMirrorPartEntityMapData oject This cannot be created Created in NX8.5.0 |
| LinkedMirrorPartEntityMapEvent | JA interface for LinkedMirrorPartEntityMapEvent object This cannot be created Created in NX8.5.0 |
| LinkedPartManager | Represents the customization interface during linked mirror part creation and update |
| iterator | Iterator for accessing the contents of the collection |
| ListCreator | Represents a NXOpen::ListCreator to be used when exporting the JT Data This class is created using NXOpen::PvtransManager |
| ListCreatorList | Represents a list of objects |
| ListingWindow | Represents a ListingWindow |
| LoadOptions | Contains accessor methods for all the part load options |
| LogFile | Represents the system log file To obtain an instance of this class, refer to NXOpen::Session Created in NX3.0.0 |
| MassPropertiesBuilder | Represents a NXOpen::MassPropertiesBuilder for calculating the weight of selected objects as well as informing the part that the assemblies weight property data needs to be updated on save |
| Material | Represents Material This is an abstract class Created in NX5.0.0 |
| MaterialManager | A manager to deal with all material objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX5.0.0 |
| MaterialUtilities | Represents Physical NXOpen::MaterialUtilities class To obtain an instance of this class, refer to NXOpen::CAE::CaeSession Created in NX10.0.0 |
| MathUtils | Contains various math utility methods To obtain an instance of this class, refer to NXOpen::Session Created in NX3.0.0 |
| Matrix3x3 | Represents a 3 x 3 matrix Created in NX3.0.0 |
| Matrix4x4 | Represents a homogenous coordinate system transformation matrix |
| Measure | Represents a measurement feature To create an instance of this use NXOpen::MeasureBodies , NXOpen::MeasureDistance , NXOpen::MeasureAngle , NXOpen::MeasureFaces , and NXOpen::MeasureLength Created in NX4.0.0 |
| MeasureAngle | Represents a single valued Angle measurement To create or edit an instance of this class, use NXOpen::MeasureAngleBuilder Created in NX4.0.0 |
| MeasureAngleBuilder | Represents a NXOpen::MeasureAngleBuilder To create a new instance of this class, use NXOpen::MeasureManager::CreateMeasureAngleBuilder Created in NX5.0.0 |
| MeasureBaseValidator | Validator for a Measure feature in a part |
| MeasureBodies | Represents the measurement specific mass properties for a set of bodies To create or edit an instance of this class, use NXOpen::MeasureBodyBuilder Created in NX4.0.0 |
| MeasureBodyBuilder | Represents a NXOpen::MeasureBodyBuilder To create a new instance of this class, use NXOpen::MeasureManager::CreateMeasureBodyBuilder Created in NX5.0.0 |
| MeasureBuilder | Represents a NXOpen::MeasureBuilder This is an abstract class, and cannot be instantiated |
| MeasureDistance | Represents a single valued distance measurement To create or edit an instance of this class, use NXOpen::MeasureDistanceBuilder Created in NX4.0.0 |
| MeasureDistanceBuilder | Represents a NXOpen::MeasureDistanceBuilder To create a new instance of this class, use NXOpen::MeasureManager::CreateMeasureDistanceBuilder Created in NX5.0.0 |
| MeasureElement | Represents an element of a master measurement Created in NX12.0.1 |
| MeasureFaceBuilder | Represents a NXOpen::MeasureFaceBuilder To create a new instance of this class, use NXOpen::MeasureManager::CreateMeasureFaceBuilder Created in NX5.0.0 |
| MeasureFaces | Represents the measurement of perimeter and area of a set of faces To create or edit an instance of this class, use NXOpen::MeasureFaceBuilder Created in NX4.0.0 |
| MeasureLength | Represents a single valued length measurement Created in NX4.0.0 |
| MeasureManager | Provides methods for manipulating the measurement objects in a part |
| MeasureMaster | Represents a collector of measure elements To create an instance of this use NXOpen::MeasureManager Created in NX12.0.1 |
| MeasureMasterBuilder | Represents a NXOpen::MeasureMasterBuilder To create a new instance of this class, use NXOpen::MeasureManager::CreateMeasureMasterBuilder Created in NX12.0.1 |
| Measurement | Provides methods for calculating and displaying the measurement information |
| MeasurePoint | Represents a point measurement Created in NX9.0.0 |
| MeasurePolarAngle | Represents a single valued polar angle measurement Created in NX8.5.0 |
| MeasurePolarArea | Represents a single valued polar area measurement Created in NX8.5.0 |
| MeasurePolarRadius | Represents a single valued polar radius measurement Created in NX8.5.0 |
| MeasureRectangularExtreme | Represents a rectangular extreme point measurement Created in NX8.5.0 |
| MechatronicsBaseValidator | Validator for a mechatronics feature in a part |
| MeshParameterData | Represents surface rebuild data structure |
| MeshProfileString | Represents Mesh profile string To create a new instance of this class, use NXOpen::Features::MeshSurfaceBuilder::NewProfile Created in NX4.0.0 |
| ModelingView | Represents a Modeling View Modeling Views may only be created by Save As |
| ModelingViewCollection | Represents a collection of ModelingView s |
| iterator | Iterator for accessing the contents of the collection |
| ModelingViewHighQualityImage | Represents the properties and methods for generating a High Quality Image of a Modeling View To obtain an instance of this class, refer to NXOpen::ModelingView Created in NX4.0.0 |
| ModelingViewList | Represents a list of objects |
| MovieManager | Represents a MovieManager class |
| MovieSettingsBuilder | This class is the builder for the Movie Settings |
| MwdesBaseValidator | Validator for a MW feature in a part |
| MWUpdate | Update tools used in Mold Wizard for the Journamation layer Created in NX5.0.0 |
| NavigatorFilter | Represents a NXOpen::NavigatorFilter object |
| NonFeatureSmartContainer | Represents a Non Feature Smart Container To create or edit an instance of this class, use NXOpen::Features::FeatureBuilder Created in NX9.0.0 |
| NXColor | Represents a standard NX color |
| Rgb | RGB values |
| NXException | A base class for exceptions thrown by NXOpen methods |
| NxFacet | Represents a facet from convergent topology |
| NXMatrix | Represents an NX matrix |
| NXMatrixCollection | Represents a collection of NX Matrixes |
| iterator | Iterator for accessing the contents of the collection |
| NXMessageBox | Displays message box |
| NXObject | A base class providing low-level services for most NXOpen classes |
| AttributeInformation | Contains attribute information |
| ComputationalTime | Holds the computational time value of a time attribute |
| NXObjectList | Represents a list of objects |
| NXObjectManager | Maintains a mapping between Tags and objects |
| NXString | An internationalized NX text string |
| NXTo2dCreator | Represents a NXOpen::NXTo2dCreator to be used when exporting the 2D Data This class is created using NXOpen::DexManager |
| ObjectGeneralPropertiesBuilder | Represents an NXOpen::ObjectGeneralPropertiesBuilder to be used for modifying the names and properties of objects |
| ObjectList | Represents a list of objects |
| ObjectSelector | Represents a NXOpen::ObjectSelector to be used when exporting the the selected objects from NX part.This class is created using NXOpen::DexManager |
| ObjectTypeSelector | Represents a NXOpen::ObjectTypeSelector to be used when filter out the objects based on the type during import/export |
| Offset | Represents a NXOpen::Offset |
| OffsetCollection | Represents a collection of NXOpen::Offset |
| iterator | Iterator for accessing the contents of the collection |
| OuterEdgesOfFacesRule | Represents a NXOpen::SelectionIntentRule that collects the outer edges of a group of faces |
| Parabola | Represents a parabola curve |
| ParabolaCollection | Represents a collection of Parabolas To obtain an instance of this class, refer to NXOpen::BasePart Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| ParamLibLibraryManagerBuilder | Represents a ParamLibLibraryManagerBuilder builder |
| ParamLibParameter | Represents Parameter Created in NX1847.0.0 |
| ParamLibParameterBuilder | Represents a ParamLibParameterBuilder builder |
| ParamLibParameterCollection | Represents the collection of all ParamLibParameter objects in this Part |
| iterator | Iterator for accessing the contents of the collection |
| ParamLibParameterLibraryManager | A manager to deal with all parameter objects To obtain an instance of this class, refer to NXOpen::BasePart Created in NX1847.0.0 |
| ParamLibParameterListBuilder | This builder is used by the Parameters list component that allows copying, editing, deleting, etc |
| Part | Represents an NX part of type .prt |
| FeatureUpdateStatus | Contains feature update status report |
| PartFamilyAttributeData | Contains part family attributes information |
| PartCleanup | Provides utilities to to eliminate certain inaccessible objects from the part file |
| PartCloseResponses | Manages a list of part name/response pairs which are used to determine whether a part should be closed if modified during part close |
| PartCloseStatus | This class represents a list of part names with associated status codes that serve to communicate why these parts were not able to be closed |
| PartCollection | Represents the collection of all parts in a session |
| iterator | Iterator for accessing the contents of the collection |
| PartDelayedUpdateStatus | Represents a list of part names with associated delay status codes |
| DelayStatusInfo | Logical structure of part delayed update status |
| PartFamilyManager | This class represents part family Use NXOpen::Part::GetPartFamilyManager to get the instance of this class |
| PartFamilyMemberData | This class is responsible for storing part family member data Use the method NXOpen::Part::NewPartFamilyMemberData to create new instance of this class |
| PartFamilyMemberValues | This class is responsible for storing part family member attribute values |
| PartImporter | Used to import a part into the work part |
| PartLoadStatus | Represents a list of part names with associated status codes |
| PartReopenReport | Contains information about a part and its components after it has been reopened |
| PartReopenStatus | Contains information about a part after an attempt was made to reopen it |
| PartSaveOptions | Contains accessor methods for all part save options that follow the part |
| PartSaveStatus | This class represents a list of part names with associated status codes that serve to communicate why these parts where not able to be saved during part save |
| PasteSpecialBuilder | Represents a NXOpen::PasteSpecialBuilder To create a new instance of this class, use NXOpen::ClipboardOperationsManager::CreatePasteSpecialBuilder Default values |
| PdwdesBaseValidator | Validator for a pdw feature in a part |
| PhysicalMaterial | Represents Physical Material Created in NX5.0.0 |
| PhysicalMaterialBuilder | Represents a NXOpen::PhysicalMaterial builder To create a new instance of this class, use NXOpen::PhysicalMaterialCollection::CreatePhysicalMaterialBuilder Created in NX6.0.0 |
| PhysicalMaterialCollection | Represents the collection of all NXOpen::PhysicalMaterial objects in this Part |
| iterator | Iterator for accessing the contents of the collection |
| Plane | Represents an Plane class |
| PlaneCollection | Represents a collection of NXOpen::Plane |
| iterator | Iterator for accessing the contents of the collection |
| PlaneList | Represents a list of objects |
| PlaneTypes | Represents an NXOpen::PlaneTypes class |
| PlmObjectNode | This class contains the factory methods for creating a PlmObjectNode |
| PlotBuilder | Represents a NXOpen::PlotBuilder |
| PlotColorsWidthsBuilder | Represents a NXOpen::PlotColorsWidthsBuilder to be used for plotting |
| PlotManager | Methods to create Gateway Builder objects |
| PlotSourceBuilder | Represents a NXOpen::PlotSourceBuilder |
| Point | Represents a smart Point |
| Point2d | Represents two-dimensional cartesian coordinates for a point Created in NX6.0.0 |
| Point3d | Represents three-dimensional cartesian coordinates for a point Created in NX3.0.0 |
| Point4d | Represents four-dimensional homogeneous coordinates for a point |
| PointCollection | Represents a collection of smart NXOpen::Point |
| iterator | Iterator for accessing the contents of the collection |
| PointList | Represents a list of objects |
| PolygonModelingTaskEnvironment | Represents the Polygon Modeling task environment associated with a session |
| Polyline | Represents a polyline curve |
| PolylineCollection | Represents a collection of polylines |
| iterator | Iterator for accessing the contents of the collection |
| PositioningDimension | Represents a dimension object attached to the feature Intances of this object cannot be directly be created |
| PreviewPropertiesBuilder | Represents a NXOpen::PreviewPropertiesBuilder to be used for creating and storing previews |
| PrimitiveFacetsRule | Represents a NXOpen::PrimitiveFacetsRule that collects primitive facets |
| Print3dBuilder | This class sends the 3d model for 3dprinting |
| PrintBuilder | Represents a NXOpen::PrintBuilder |
| PrintPDFBuilder | Represents a NXOpen::PrintPDFBuilder to be used when exporting the Current Display or selected sheets to a PDF document |
| ProeImporter | Represents a NXOpen::ProeImporter to be used when importing the ProE Data This class is created using NXOpen::DexManager |
| PropertiesManager | Methods to create Gateway Properties Builder objects |
| PropertyContainer | Represents a list of properties |
| PvtransManager | Methods to create Pvtrans Builder objects |
| ReferenceSet | Represents a NXOpen::ReferenceSet |
| RegionBoundaryRule | Represents a NXOpen::SelectionIntentRule that collects curves as specified by an enclosed region |
| RegionPoint | Represents a point and body context on a region point |
| RegionPointList | Represents a list of objects |
| RemoteUtilities | This class is primarily designed for use in a remote session, and allows client applications to access resources on a remote server |
| ReplaceExpressionsBuilder | This class creates Replace expressions from the source part to the current work part via the naming rule defined |
| ResourceBarManager | Represents an interface to manage Resource Bar tabs |
| ReuseBaseValidator | Validator for a reuse feature in a part |
| RibTopFaceEdgesRule | Represents a NXOpen::SelectionIntentRule that collects the like convexity outer edges of a group of faces |
| RoughBrushFacetsRule | Represents a NXOpen::FacetSelectionRule that collects facets with rough brush tool intent |
| RuleManager | Provides methods for manipulating the Knowledge Fusion rules in a part |
| AdoptableTypes | Used to return adoptable object types |
| DebugInstance | Used to return debug update information for instances |
| DebugRule | Used to return debug update information for rules |
| FunctionArgumentsInformation | Used to return information about the arguments for a function |
| FunctionInformation | Used to return information about a function |
| ParameterRule | Used to specify parameter values for child rule creation or modification |
| SaveOptions | Contains accessor methods for all part save options that follow the session |
| Scalar | Represents a scalar |
| ScalarCollection | Represents a collection of NXOpen::Scalar objects |
| iterator | Iterator for accessing the contents of the collection |
| ScalarMatrixValue | Represents a General M x N matrix of scalar (real) values |
| ScalarTableValue | Represents a General M x N table of scalar (real) values |
| ScCollector | Represents a collector ScCollector consists of collection of either faces, bodies, edges, curves or a mixed collection of these entities |
| ScCollectorCollection | This class contains the factory methods for creating a sc collector |
| iterator | Iterator for accessing the contents of the collection |
| ScCollectorList | Represents a list of objects |
| ScRuleFactory | This class contains the factory methods for creating selection intent rules To obtain an instance of this class, refer to NXOpen::BasePart Created in NX3.0.0 |
| Section | Represents a section Section consists of "chained_entity", a chain or a single entity of edge or curve |
| SectionCollection | This class contains the factory methods for creating a section |
| iterator | Iterator for accessing the contents of the collection |
| SectionData | Represents section data Created in NX3.0.0 |
| SectionElementData | Represents section element data Created in NX3.0.0 |
| SectionList | Represents a list of objects |
| SelectBody | Represents a single object selection |
| SelectBodyList | Represents a list of objects on a selection list |
| SelectCartesianCoordinateSystem | Represents a single object selection |
| SelectCoordinateSystem | Represents a single object selection |
| SelectCoordinateSystemList | Represents a list of objects on a selection list |
| SelectCurve | Represents a single object selection |
| SelectCurveList | Represents a list of objects on a selection list |
| SelectDatumPlane | Represents a single object selection |
| SelectDatumPlaneList | Represents a list of objects on a selection list |
| SelectDisplayableObject | Represents a single object selection |
| SelectDisplayableObjectList | Represents a list of objects on a selection list |
| SelectEdge | Represents a single object selection |
| SelectEdgeList | Represents a list of objects on a selection list |
| SelectExpressionList | Represents a list of objects on a selection list |
| SelectFace | Represents a single object selection |
| SelectFaceList | Represents a list of objects on a selection list |
| SelectGroup | Represents a single object selection |
| SelectIBaseCurve | Represents a single object selection |
| SelectIBaseCurveList | Represents a list of objects on a selection list |
| SelectIBasePlaneList | Represents a list of objects on a selection list |
| SelectIBody | Represents a single object selection |
| SelectICurve | Represents a single object selection |
| SelectICurveList | Represents a list of objects on a selection list |
| SelectINXObjectList | Represents a list of objects on a selection list |
| Selection | Defines an interface object for executing selection operations To obtain an instance of this class, refer to NXOpen::UI Created in NX3.0.0 |
| MaskTriple | Used in selection methods to set the types of objects that are selectable |
| SelectionDescriptor | For a rectangle deselection, the fields Deselection , MultipleSelection , Rectangle bits would be set |
| SelectionHandle | Represents a SelectionHandle for UI Styler Created in NX5.0.0 |
| SelectionIntentRule | Represents a NXOpen::SelectionIntentRule which essentially provides capabilities to collect curves, edges, faces and bodies |
| SelectionMethod | Represents the output from a smart selector method This is an abstract class, and cannot be created |
| SelectionSubscriber | Defines a SelectionSubscriber for managing selection events To create a new instance of this class, use NXOpen::Selection::CreateSelectionSubscriber Created in NX11.0.0 |
| SelectIParameterizedSurface | Represents a single object selection |
| SelectIParameterizedSurfaceList | Represents a list of objects on a selection list |
| SelectIReferenceAxis | Represents a single object selection |
| SelectISurface | Represents a single object selection |
| SelectLine | Represents a single object selection |
| SelectModelingViewList | Represents a list of objects on a selection list |
| SelectNXObject | Represents a single object selection |
| SelectNXObjectList | Represents a list of objects on a selection list |
| SelectObject | Represents a single object selection |
| SelectObjectList | Represents a list of objects on a selection list |
| SelectPart | Represents a single object selection |
| SelectPartList | Represents a list of objects on a selection list |
| SelectPoint | Represents a single object selection |
| SelectPointList | Represents a list of objects on a selection list |
| SelectSketch | Represents a single object selection |
| SelectSketchList | Represents a list of objects on a selection list |
| SelectSmartObject | Represents a single object selection |
| SelectSpline | Represents a single object selection |
| SelectSplineList | Represents a list of objects on a selection list |
| SelectTaggedObject | Represents a single object selection |
| SelectTaggedObjectList | Represents a list of objects on a selection list |
| SelectView | Represents a single object selection |
| SelectViewList | Represents a list of objects on a selection list |
| Session | Represents the NX session |
| UndoMarkData | This structure contains data about an undo mark |
| SheetMetalArcPrinter | Arc printer for a SheetMetal part |
| SheetMetalBcurvePrinter | Bcurve printer for a SheetMetal part |
| SheetMetalEllipsePrinter | Ellipse printer for a SheetMetal part |
| SheetMetalLinePrinter | Line printer for a SheetMetal part |
| SheetMetalPointPrinter | Point printer for a SheetMetal part |
| ShipBaseDrawingValidator | Validator for a ship drawing in a part |
| ShipBaseValidator | Validator for a ship feature in a part |
| SingleFacetRule | Represents a NXOpen::FacetSelectionRule that collects facets without any intent i.e |
| SingleMeasure | Represents a single valued measurement Created in NX4.0.0 |
| Sketch | Represents a sketch Use the NXOpen::SketchCollection class to create a sketch |
| ConstraintGeometry | Used by the create geometric constraint methods to indicate what geometry the constraint should be applied to |
| ConstraintGeometryHelp | Used by several constraint creation methods that need a help point or parameter to indicate how to create the constraint |
| CopyObjectData | This structure represents a map between the original object to be copied and the corresponding copied object |
| DimensionGeometry | Used in the dimension creation methods to indicate what geometry to create the dimension on |
| SketchAlignmentConstraint | Represents a sketch alignment constraint Use NXOpen::SketchConstraintBuilder to create an instance of this class |
| SketchAlongPathBuilder | Use the NXOpen::SketchAlongPathBuilder to create or reattach a NXOpen::Sketch along a path |
| SketchAngularDimensionBuilder | Represents a NXOpen::SketchAngularDimensionBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateAngularDimensionBuilder Created in NX9.0.0 |
| SketchAssociativeTrim | Represents a sketch associative trim constraint Use SketchCollection::CreateSketchAssociativeTrimBuilder to create an instance of this class |
| SketchAssociativeTrimBuilder | Represents a NXOpen::SketchAssociativeTrimBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchAssociativeTrimBuilder Default values |
| SketchAutoConstrainBuilder | Represents a NXOpen::SketchAutoConstrainBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateAutoConstrainBuilder Default values |
| SketchAutoDimensionBuilder | Represents a NXOpen::SketchAutoDimensionBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateAutoDimensionBuilder Default values |
| SketchChamferBuilder | Represents a Chamfer builder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchChamferBuilder Default values |
| SketchCollection | Represents a collection of sketches To obtain an instance of this class, refer to NXOpen::Part Created in NX3.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| SketchConicBuilder | Represents a NXOpen::SketchConicBuilder builder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchConicBuilder Default values |
| SketchConstraint | Represents a constraint in a sketch |
| SketchConstraintBuilder | Represents a NXOpen::SketchConstraint builder To create a new instance of this class, use NXOpen::SketchCollection::CreateConstraintBuilder Created in NX8.5.0 |
| SketchCornerBuilder | Create a corner between two sketch curves |
| SketchDimensionalConstraint | Represents a dimensional constraint To create an instance of this class refer to NXOpen::Sketch Created in NX3.0.0 |
| SketchDimensionBuilder | Edit the geometry references of an existing sketch dimension |
| SketchEditDefiningSectionBuilder | Represents a NXOpen::SketchEditDefiningSectionBuilder builder |
| SketchEllipseBuilder | Represents a NXOpen::SketchEllipseBuilder builder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchEllipseBuilder Default values |
| SketchEvaluator | Represents a sketch-on-path evaluator |
| SketchEvaluatorCollection | Represents a collection of NXOpen::SketchEvaluator |
| iterator | Iterator for accessing the contents of the collection |
| SketchExpressionModifierBuilder | Represents a Sketch Expression Modifier Builder |
| SketchG1Constraint | Represents a sketch G1 constraint Use NXOpen::Features::FeatureCollection::CreateSketchSplineBuilder to create an instance of this class |
| SketchG2Constraint | Represents a sketch G2 constraint Use NXOpen::Features::FeatureCollection::CreateSketchSplineBuilder to create an instance of this class |
| SketchGeometricConstraint | Represents a geometric sketch constraint To create an instance of this class refer to Sketch Created in NX3.0.0 |
| SketchHelpedDimensionalConstraint | Represents a dimensional sketch constraint that has a help point or help parameter Created in NX3.0.0 |
| SketchHelpedGeometricConstraint | Represents a geometric sketch constraint that has a help point or help parameter To obtain an instance of this class, use Sketch Created in NX3.0.0 |
| SketchInDraftingBuilder | Use the NXOpen::SketchInDraftingBuilder to create a NXOpen::Sketch on a NXOpen::Drawings::DraftingView or NXOpen::Drawings::DrawingSheet |
| SketchInPlaceBuilder | Use the NXOpen::SketchInPlaceBuilder to create or reattach a NXOpen::Sketch on a NXOpen::DatumPlane or planar NXOpen::Face |
| SketchIntersectionCurve | Represents a Intersection Curve operation inside sketch To create an instance of this object use NXOpen::SketchIntersectionCurveBuilder Created in NX5.0.0 |
| SketchIntersectionCurveBuilder | Represents a NXOpen::SketchIntersectionCurve builder To obtain an instance of this class use NXOpen::SketchCollection::CreateIntersectionCurveBuilder |
| SketchIntersectionPoint | Represents an Intersection Point operation inside sketch To create an instance of this object use NXOpen::SketchIntersectionPointBuilder Created in NX5.0.0 |
| SketchIntersectionPointBuilder | Represents a NXOpen::SketchIntersectionPoint builder To obtain an instance of this class use NXOpen::SketchCollection::CreateIntersectionPointBuilder |
| SketchLinearDimensionBuilder | Represents a NXOpen::SketchLinearDimensionBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateLinearDimensionBuilder Created in NX9.0.0 |
| SketchMakeSymmetricBuilder | This class is used to add symmetric contraint to objects from a NXOpen::SketchMakeSymmetricBuilder |
| SketchMirrorPatternBuilder | Represents a NXOpen::SketchMirrorPatternBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchMirrorPatternBuilder Default values |
| SketchOffset | Represents a sketch offset constraint Use SketchCollection::CreateSketchOffsetBuilder to create an instance of this class |
| SketchOffsetBuilder | Represents a NXOpen::SketchOffsetBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchOffsetBuilder Default values |
| SketchPasteBuilder | Represents a NXOpen::SketchPasteBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchPasteBuilder Default values |
| SketchPattern | Represents a sketch pattern constraint Use SketchCollection::CreateSketchPatternBuilder to create an instance of this class |
| SketchPatternBuilder | Represents a NXOpen::SketchPatternBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchPatternBuilder Default values |
| SketchPolygon | Represents a polygon constraint in a sketch To create or edit an instance of this class, use NXOpen::SketchPolygonBuilder Created in NX7.5.0 |
| SketchPolygonBuilder | Represents a NXOpen::SketchPolygon builder To create a new instance of this class, use NXOpen::SketchCollection::CreateSketchPolygonBuilder Default values |
| SketchProjectBuilder | Represents a NXOpen::SketchProjectBuilder builder To create a new instance of this class, use NXOpen::SketchCollection::CreateProjectBuilder Default values |
| SketchQuickExtendBuilder | Represents a NXOpen::SketchQuickExtendBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateQuickExtendBuilder Default values |
| SketchQuickTrimBuilder | Represents a NXOpen::SketchQuickTrimBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateQuickTrimBuilder Default values |
| SketchRadialDimensionBuilder | Represents a NXOpen::SketchRadialDimensionBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateRadialDimensionBuilder Created in NX9.0.0 |
| SketchRapidDimensionBuilder | Represents a NXOpen::SketchRapidDimensionBuilder To create a new instance of this class, use NXOpen::SketchCollection::CreateRapidDimensionBuilder Created in NX9.0.0 |
| SketchTangentConstraint | Represents a tangent constraint To create an instance of this object use Sketch::CreateTangentConstraint Created in NX3.0.0 |
| SketchTangentToStringConstraint | Represents a sketch tangent to string constraint Use SketchCollection::CreateConstraintBuilder to create an instance of this class |
| SmartObject | Represents a smart object |
| SphericalCoordinateSystem | Represents a spherical coordinate system To create a new instance of this class, use NXOpen::CoordinateSystemCollection::CreateSphericalCoordinateSystem Created in NX4.0.0 |
| Spline | Represents a spline curve |
| SplineCollection | Represents a collection of splines |
| iterator | Iterator for accessing the contents of the collection |
| Spreadsheet | Represents a class for internal spreadsheet |
| SpreadsheetCellData | Represents a class for Spreadsheet cell data |
| SpreadsheetExternal | Represents a class for external spreadsheet |
| SpreadsheetManager | Represents a class for interacting with spreadsheets |
| Step203Creator | Represents a NXOpen::Step203Creator to be used when exporting the STEP203 Data This class is created using NXOpen::DexManager |
| Step203Importer | Represents a NXOpen::Step203Importer to be used when importing the STEP203 Data This class is created using NXOpen::DexManager |
| Step214Creator | Represents a NXOpen::Step214Creator to be used when exporting the STEP214 Data This class is created using NXOpen::DexManager |
| Step214Importer | Represents a NXOpen::Step214Importer to be used when importing the STEP214 Data This class is created using NXOpen::DexManager |
| Step242Importer | Represents a NXOpen::Step242Importer to be used when importing STEP242 Data This class is created using NXOpen::DexManager |
| StepCreator | Represents a NXOpen::StepCreator to be used when exporting the STEP Data This class is created using NXOpen::DexManager |
| STLCreator | Represents a NXOpen::STLCreator to be used when exporting the STL Data This class is created using NXOpen::DexManager |
| STLImporter | Used to import an STL file into the work part |
| StudioMaterialManager | Represents the properties and methods for studio material Manager To obtain an instance of this class, refer to NXOpen::Session Created in NX1847.0.0 |
| SubdivisionMeshBody | Represents a subdivision mesh |
| SubdivisionMeshEdge | Represents a subdivision mesh edge |
| SubdivisionMeshFace | Represents a subdivision mesh face |
| SubdivisionMeshVertex | Represents a subdivision mesh vertex |
| SubdivisionTaskEnvironment | Represents the subdivision task environment associated with a session |
| SuppressByExpressionBuilder | Represents a NXOpen::SuppressByExpressionBuilder To create a new instance of this class, use NXOpen::ExpressionCollection::CreateSuppressByExpressionBuilder Default values |
| SurfaceRebuildData | Represents surface rebuild data structure |
| SurfaceUVDirectionBuilder | Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions |
| SymbolFont | Represents a symbol font This class cannot be created, but an instance can be obtained from NXOpen::Annotations::AnnotationManager::LoadSymbolFontFromSbfFile |
| TableEditorDefaultDataProvider | Provides basic data for a Table Editor block |
| TaggedObject | An object that has a Tag |
| TaggedObjectCollection | A base class for all NXOpen tagged object collections |
| TaggedObjectList | Represents a list of objects |
| TangentFacetsRule | Represents a NXOpen::TangentFacetsRule that collects facets maintaining the tangency within given tolerance |
| TextColorFontWidthBuilder | Represent a NXOpen::TextColorFontWidthBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0 |
| TextureModelingTaskEnvironment | Represents the texture modeling task environment associated with a session |
| Traceline | Represents a traceline |
| TracelineCollection | Represents a collection of tracelines To obtain an instance of this class, refer to NXOpen::Part Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| TransientObject | An NX transient object |
| TreeListNode | Represents a TreeList Node Object Created in NX6.0.4 |
| UI | This class contains the various elements that represent the NX User Interface |
| Unit | Represents a unit To obtain an instance of this class use NXOpen::UnitCollection Created in NX4.0.0 |
| UnitCollection | Provides methods for manipulating the units in a part To obtain an instance of this class, refer to NXOpen::BasePart Created in NX4.0.0 |
| iterator | Iterator for accessing the contents of the collection |
| Update | Provides methods for update and delete |
| Validation | Represents an NX NXOpen::Validation object |
| ValidationBaseArrowValidator | Validator for a Base Arrow This is a test class |
| ValidationCollection | Represents a collection of NXOpen::Validation |
| iterator | Iterator for accessing the contents of the collection |
| ValidationDraftingEdgeVDCurveCollectionValidator | Validator for all drafting edge vdcurves in a part This is a test class |
| ValidationDraftingImageValidator | Validator for a drafting image This is a test class |
| ValidationDraftingInterferenceVDCurveCollectionValidator | Validator for all drafting interference vdcurve in a part This is a test class |
| ValidationDraftingSectionEdgeVDCurveCollectionValidator | Validator for all drafting section edge vdcurves in a part This is a test class |
| ValidationDraftingSilhouetteVDCurveCollectionValidator | Validator for all drafting silhouette vdcurves in a part This is a test class |
| ValidationDraftingSimplifiedVDCurveCollectionValidator | Validator for all drafting simplified curves in a part This is a test class |
| ValidationDraftingThreadVDCurveCollectionValidator | Validator for all drafting thread(thread silhouette and thread section edge) vdcurves in a part This is a test class |
| ValidationDraftingTraceLineVDCurveCollectionValidator | Validator for all drafting traceline vdcurves in a part This is a test class |
| ValidationDraftingUVHatchVDCurveCollectionValidator | Validator for all drafting uvhatch vdcurve in a part This is a test class |
| ValidationDraftingVIVDCurveCollectionValidator | Validator for all drafting vi vdcurves in a part This is a test class |
| ValidationDrawingBookletValidator | Validator for a drafting member view This is a test class |
| ValidationDrawingSheetValidator | Validator for a DrawingSheet This is a test class |
| ValidationDrawingTo3DReportValidator | Validator for draw to 3d report This is a test class |
| ValidationDrawingTo3DValidator | Validator for all modeling views This is a test class |
| ValidationExtractedEdgeCollectionValidator | Validator for all drafting extracted edges in a part This is a test class |
| ValidationHoleTableValidator | Validator for a Hole Table This is a test class |
| ValidationInterferenceCurveCollectionValidator | Validator for all drafting interference curves in a part This is a test class |
| ValidationLayout2dComponentStructureValidator | Validator for Layout2d::Component instance structure This is a test class |
| ValidationLayout2dComponentValidator | Validator for a layout2d component This is a test class |
| ValidationLayout2dDrawingSheetsValidator | Validator for a DrawingSheet This is a test class |
| ValidationLayout2dLinksValidator | Validator for Layout2d links This is a test class |
| ValidationLayout2dSketchStructureValidator | Validator for sketch structure This is a test class |
| ValidationModelingViewsCollectionValidator | Validator for all modeling views This is a test class |
| ValidationModelingViewsValidator | Validator for all modeling views This is a test class |
| ValidationPMIPlanarCPSValidator | Validator for a PMI Cutting Plate This is a test class |
| ValidationSilhouetteCurveCollectionValidator | Validator for all drafting silhouette curves in a part This is a test class |
| ValidationSimplifiedCurveCollectionValidator | Validator for all drafting simplified curves in a part This is a test class |
| ValidationTraceLineCollectionValidator | Validator for all drafting traceline curves in a part This is a test class |
| ValidationUVHatchCurveCollectionValidator | Validator for all drafting uvhatch curve in a part This is a test class |
| ValidationViewingDirectionArrowLabelValidator | Validator for a Viewing Direction Arrow Label This is a test class |
| ValidationViewingDirectionArrowValidator | Validator for a Viewing Direction Arrow This is a test class |
| VDBaseValidator | Validator for a vehicle design feature in a part |
| Vector3d | Represents a three-dimensional vector Created in NX3.0.0 |
| View | Represents a view |
| ViewCollection | Represents a collection of NXOpen::View s |
| iterator | Iterator for accessing the contents of the collection |
| ViewDependentDisplayManager | Represents all view dependent display operations To obtain an instance of this class, refer to NXOpen::View Created in NX5.0.0 |
| ViewUIManager | To obtain an instance of this class, refer to NXOpen::UI Created in NX11.0.1 |
| VirtuallabImporter | Represents a VirtuallabImporter to be used when importing the Virtuallab Data This class is created using DexManager |
| VRMLImporter | Used to import a VRML file into the work part |
| WavefrontObjImporter | Represents a NXOpen::WavefrontObjImporter to be used when importing OBJ Data This class is created using NXOpen::DexManager |
| WCS | Represents the World Coordinate System |
| WeldBaseValidator | Validator for a Weld feature in a part |
| WidthDefinition | Represents a NXOpen::WidthDefinition , which is a representation of an NX width palette |
| WindowHandle | Represent a window handle |
| WithinCurvesRule | Represents a NXOpen::WithinCurvesRule that collects facets within curve |
| Xform | Represents a smart xform To create a new instance of this class, use NXOpen::XformCollection::CreateXform Created in NX3.0.0 |
| XformCollection | Represents a collection of NXOpen::Xform objects |
| iterator | Iterator for accessing the contents of the collection |
| NXOpenUI | Provides classes and interfaces for NX Open UI classes |
| ObjectContainer | |
| CustomAttribute | |
| NativeEquipment |
