Represets a Cam Tool Path
This is a Subobject and cannot be publicly instantiated. More...

Inheritance diagram for NXOpen::CAM::Path:

Public Types
enum	FindingTypes { FindingTypesGouge = 1, FindingTypesSpike, FindingTypesSingularity = 5, FindingTypesSoftLimit, FindingTypesHardLimit, FindingTypesUnwind, FindingTypesCollision, FindingTypesReachFailure, FindingTypesVariableLimit, FindingTypesHolderCollision, FindingTypesRapidCollision }
	Valid finding types to query the path. More...

Public Member Functions
NXOpen::CAM::PathEvent *	AddCircularMotion (NXOpen::CAM::PathCircularMotion data, NXOpen::CAM::CamPathToolpathEventLocation location, NXOpen::CAM::PathEvent referenceEvent)
	Add a circular move at location, if location is end location(append) then the reference is not relevant Created in NX11.0.2. More...

NXOpen::CAM::PathEvent *	AddHelixMotion (NXOpen::CAM::PathHelixMotion data, NXOpen::CAM::CamPathToolpathEventLocation location, NXOpen::CAM::PathEvent referenceEvent)
	Add a helix move at location, if location is end location(append) then the reference is not relevant Created in NX11.0.2. More...

NXOpen::CAM::PathEvent *	AddLevelMarker (NXOpen::CAM::PathLevelMarker data, NXOpen::CAM::CamPathToolpathEventLocation location, NXOpen::CAM::PathEvent referenceEvent)
	Add a level marker event at location, if location is end location(append) then the reference is not relevant Created in NX11.0.2. More...

NXOpen::CAM::PathEvent *	AddLinearMotion (NXOpen::CAM::PathLinearMotion data, NXOpen::CAM::CamPathToolpathEventLocation location, NXOpen::CAM::PathEvent referenceEvent)
	Add a linear move at location, if location is end location(append) then the reference is not relevant Created in NX11.0.2. More...

NXOpen::CAM::PathEvent *	AddMarker (NXOpen::CAM::PathMarker data, NXOpen::CAM::CamPathToolpathEventLocation location, NXOpen::CAM::PathEvent referenceEvent)
	Add a marker event at location, if location is end location(append) then the reference is not relevant Created in NX12.0.1. More...

NXOpen::CAM::PathEvent *	AddUde (const NXString &udeName, NXOpen::CAM::CamPathToolpathEventLocation location, NXOpen::CAM::PathEvent *referenceEvent)
	Add a helix move at location, if location is end location(append) then the reference is not relevant Created in NX11.0.2. More...

NXOpen::CAM::PathEvent *	AddUde (const char udeName, NXOpen::CAM::CamPathToolpathEventLocation location, NXOpen::CAM::PathEvent referenceEvent)
	Add a helix move at location, if location is end location(append) then the reference is not relevant Created in NX11.0.2. More...

void	AppendCircularMotion (NXOpen::CAM::PathCircularMotion *data)
	Append a circular move Created in NX10.0.1. More...

void	AppendHelixMotion (NXOpen::CAM::PathHelixMotion *data)
	Append a helical move Created in NX10.0.2. More...

void	AppendLevelMarker (NXOpen::CAM::PathLevelMarker *data)
	Append a level marker Created in NX10.0.3. More...

void	AppendLinearMotion (NXOpen::CAM::PathLinearMotion *data)
	Append a linear move Created in NX10.0.1. More...

void	AppendMarker (NXOpen::CAM::PathMarker *data)
	Append a marker Created in NX12.0.1. More...

void	AppendUde (const NXString &udeName)
	Append an ude of name with default values Created in NX10.0.1. More...

void	AppendUde (const char *udeName)
	Append an ude of name with default values Created in NX10.0.1. More...

NXOpen::CAM::CamPathContactType	ContactType ()
	Returns the contact type of the path Created in NX11.0.2. More...

void	DeleteAllUdesOfName (const NXString &udeName)
	Clean up by deleting all Udes that have the specified name ** Created in NX11.0.2. More...

void	DeleteAllUdesOfName (const char *udeName)
	Clean up by deleting all Udes that have the specified name ** Created in NX11.0.2. More...

void	DeleteOneEvent (int index)
	Delete one event Created in NX10.0.3. More...

void	DeleteOneEvent (NXOpen::CAM::PathEvent *pathEvent)
	Delete one event Created in NX11.0.2. More...

void	EmptyPath ()
	Empty the path by deleteing all events Created in NX10.0.3. More...

NXOpen::CAM::PathCircularMotion *	GetCircularMotion (int index)
	Get the data of the circular motion at the given index Created in NX10.0.1. More...

NXOpen::CAM::PathCircularMotion *	GetCircularMotion (NXOpen::CAM::PathEvent *eventOfInterest)
	Get the data of the circular motion at the given index Created in NX11.0.2. More...

NXOpen::CAM::PathEvent *	GetFirstEvent ()
	Ask for the first path event ** Created in NX11.0.2. More...

NXOpen::CAM::PathHelixMotion *	GetHelixMotion (int index)
	Get the data of the helix motion at the given index Created in NX10.0.1. More...

NXOpen::CAM::PathHelixMotion *	GetHelixMotion (NXOpen::CAM::PathEvent *eventOfInterest)
	Get the data of the helix motion event Created in NX11.0.2. More...

NXOpen::CAM::PathLaserOptimizationData *	GetLaserOptimizationData ()
	Get the laser optimization data Created in NX9.0.3. More...

NXOpen::CAM::PathEvent *	GetLastEvent ()
	Ask for the last path event ** Created in NX11.0.2. More...

NXOpen::CAM::PathLevelMarker *	GetLevelMarker (int index)
	Get the data of the level index at the given index Created in NX10.0.3. More...

NXOpen::CAM::PathLevelMarker *	GetLevelMarker (NXOpen::CAM::PathEvent *eventOfInterest)
	Get the data of the level marker event Created in NX11.0.2. More...

NXOpen::CAM::PathLinearMotion *	GetLinearMotion (int index)
	Get the data of the linear motion at the given index Created in NX10.0.1. More...

NXOpen::CAM::PathLinearMotion *	GetLinearMotion (NXOpen::CAM::PathEvent *eventOfInterest)
	Get the data of the linear motion Created in NX11.0.2. More...

NXOpen::CAM::PathMarker *	GetMarker (int index)
	Get the data of the marker at the given index Created in NX12.0.1. More...

NXOpen::CAM::PathMarker *	GetMarker (NXOpen::CAM::PathEvent *eventOfInterest)
	Get the data of the marker event Created in NX12.0.1. More...

int	GetNumberOfFindings (NXOpen::CAM::Path::FindingTypes type)
	Get the number of findings given a finding type Created in NX12.0.2. More...

NXOpen::CAM::PathEvent *	GetToolpathEvent (int eventNumber)
	Get the tool path event for a given index Created in NX11.0.2. More...

NXOpen::CAM::CamPathToolpathEventType	GetToolpathEventType (int eventNumber)
	Get the tool path event type Created in NX10.0.1. More...

NXOpen::CAM::CamPathToolpathEventType	GetToolpathEventType (NXOpen::CAM::PathEvent *pathEvent)
	Get the tool path event type Created in NX11.0.2. More...

NXOpen::CAM::Ude *	GetUde (int index)
	Get the UDE event at the given index Created in NX10.0.1. More...

NXOpen::CAM::Ude *	GetUde (NXOpen::CAM::PathEvent *eventOfInterest)
	Get the data of the Ude event Created in NX11.0.2. More...

void	InsertCircularMotionAfter (NXOpen::CAM::PathCircularMotion *data, int index)
	Insert Circular Motion after indicated index Created in NX10.0.1. More...

void	InsertCircularMotionBefore (NXOpen::CAM::PathCircularMotion *data, int index)
	Insert Circular Motion before indicated index Created in NX10.0.1. More...

void	InsertHelixMotionAfter (NXOpen::CAM::PathHelixMotion *data, int index)
	Insert Helical Motion after indicated index Created in NX10.0.2. More...

void	InsertHelixMotionBefore (NXOpen::CAM::PathHelixMotion *data, int index)
	Insert Helical Motion before indicated index Created in NX10.0.2. More...

void	InsertLevelMarkerAfter (NXOpen::CAM::PathLevelMarker *data, int index)
	Insert a level marker after the specified index Created in NX10.0.3. More...

void	InsertLevelMarkerBefore (NXOpen::CAM::PathLevelMarker *data, int index)
	Insert a level marker before the specified index Created in NX10.0.3. More...

void	InsertLinearMotionAfter (NXOpen::CAM::PathLinearMotion *data, int index)
	Insert a linear move after the specified index* Created in NX10.0.1. More...

void	InsertLinearMotionBefore (NXOpen::CAM::PathLinearMotion *data, int index)
	Insert a linear move before the specified index Created in NX10.0.1. More...

void	InsertMarkerAfter (NXOpen::CAM::PathMarker *data, int index)
	Insert a marker after the specified index Created in NX12.0.1. More...

void	InsertMarkerBefore (NXOpen::CAM::PathMarker *data, int index)
	Insert a marker before the specified index Created in NX12.0.1. More...

void	InsertUdeAfter (const NXString &udeName, int index)
	Insert an ude of name with default values after the given index Created in NX10.0.1. More...

void	InsertUdeAfter (const char *udeName, int index)
	Insert an ude of name with default values after the given index Created in NX10.0.1. More...

void	InsertUdeBefore (const NXString &udeName, int index)
	Insert an ude of name with default values before the given index Created in NX10.0.1. More...

void	InsertUdeBefore (const char *udeName, int index)
	Insert an ude of name with default values before the given index Created in NX10.0.1. More...

bool	IsToolpathEventAMotion (int eventNumber, NXOpen::CAM::CamPathMotionType motionType, NXOpen::CAM::CamPathMotionShapeType motionShape)
	Tell if the event is a motion. More...

bool	IsToolpathEventAMotion (NXOpen::CAM::PathEvent eventOfInterest, NXOpen::CAM::CamPathMotionType motionType, NXOpen::CAM::CamPathMotionShapeType *motionShape)
	Tell if the event is a motion Created in NX11.0.2. More...

bool	IsToolpathEventUde (NXOpen::CAM::PathEvent eventOfInterest, NXString udeName)
	Tell if the event is a ude Created in NX11.0.2. More...

void	MoveEvent (int fromIndex, int toIndex)
	Move the event at index fromIndex to index toIndex. More...

void	MoveEvent (NXOpen::CAM::PathEvent eventToMove, NXOpen::CAM::CamPathToolpathEventLocation location, NXOpen::CAM::PathEvent referenceEvent)
	Move the event relative to the referenceEvent and the location. More...

NXOpen::CAM::PathCircularMotion *	NewPathCircularMotion ()
	Constructs a new path circular motion object. More...

NXOpen::CAM::PathHelixMotion *	NewPathHelixMotion ()
	Constructs a new path helix motion object. More...

NXOpen::CAM::PathLinearMotion *	NewPathLinearMotion ()
	Constructs a new path linear motion object. More...

NXOpen::CAM::PathMarker *	NewPathMarker (NXOpen::CAM::PathMarker::Type markerType)
	Constructs a new path marker object. More...

int	NumberOfToolpathEvents ()
	Returns the number of tool path events Created in NX10.0.1. More...

void	SetCircularMotion (int index, NXOpen::CAM::PathCircularMotion *data)
	Updates the data of the circular motion event at the given index Created in NX10.0.1. More...

void	SetCircularMotion (NXOpen::CAM::PathEvent eventOfInterest, NXOpen::CAM::PathCircularMotion data)
	Updates the data of the circular motion event Created in NX11.0.2. More...

void	SetContactType (NXOpen::CAM::CamPathContactType contactType)
	Sets the contact type of the path Created in NX11.0.2. More...

void	SetHelixMotion (int index, NXOpen::CAM::PathHelixMotion *data)
	Updates the data of the helix motion event at the given index Created in NX10.0.1. More...

void	SetHelixMotion (NXOpen::CAM::PathEvent eventOfInterest, NXOpen::CAM::PathHelixMotion data)
	Updates the data of the helix motion event Created in NX11.0.2. More...

void	SetLevelMarker (int index, NXOpen::CAM::PathLevelMarker *data)
	Updates the data of the level marker event at the given index Created in NX10.0.3. More...

void	SetLevelMarker (NXOpen::CAM::PathEvent eventOfInterest, NXOpen::CAM::PathLevelMarker data)
	Updates the data of the level marker event Created in NX11.0.2. More...

void	SetLinearMotion (int index, NXOpen::CAM::PathLinearMotion *data)
	Updates the data of the linear motion event at the given index Created in NX10.0.1. More...

void	SetLinearMotion (NXOpen::CAM::PathEvent eventOfInterest, NXOpen::CAM::PathLinearMotion data)
	Updates the data of the linear motion event Created in NX11.0.2. More...

void	SetMarker (int index, NXOpen::CAM::PathMarker *data)
	Updates the data of the marker event at the given index Created in NX12.0.1. More...

void	SetMarker (NXOpen::CAM::PathEvent eventOfInterest, NXOpen::CAM::PathMarker data)
	Updates the data of the marker event Created in NX12.0.1. More...

void	SetUde (int index, NXOpen::CAM::Ude *data)
	Set the UDE event at the given index; The CAM.Ude API object no longer is valid after this call Created in NX10.0.1. More...

void	SetUde (NXOpen::CAM::PathEvent eventOfInterest, NXOpen::CAM::Ude data)
	Updates the data of the ude event Created in NX11.0.2. More...

NXOpen::CAM::CamPathToolAxisType	ToolAxisType ()
	Returns the tool axis type of the path Created in NX10.0.1. More...

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represets a Cam Tool Path
This is a Subobject and cannot be publicly instantiated.

Created in NX9.0.3.

Member Enumeration Documentation

enum NXOpen::CAM::Path::FindingTypes

Valid finding types to query the path.

Enumerator
FindingTypesGouge	Finding type gouge.
FindingTypesSpike	Finding type spike.
FindingTypesSingularity	Finding type singularity.
FindingTypesSoftLimit	Finding type soft limit.
FindingTypesHardLimit	Finding type hard limit.
FindingTypesUnwind	Finding type unwind.
FindingTypesCollision	Finding type collision.
FindingTypesReachFailure	Finding type reach failure.
FindingTypesVariableLimit	Finding type variable limit.
FindingTypesHolderCollision	Finding type tool holder collision.
FindingTypesRapidCollision	Finding type tool rapid collision.

Member Function Documentation

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::AddCircularMotion	(	NXOpen::CAM::PathCircularMotion *	data,
		NXOpen::CAM::CamPathToolpathEventLocation	location,
		NXOpen::CAM::PathEvent *	referenceEvent
	)

Add a circular move at location, if location is end location(append) then the reference is not relevant
Created in NX11.0.2.

License requirements : None

Parameters

data	data
location	location
referenceEvent	referenceevent

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::AddHelixMotion	(	NXOpen::CAM::PathHelixMotion *	data,
		NXOpen::CAM::CamPathToolpathEventLocation	location,
		NXOpen::CAM::PathEvent *	referenceEvent
	)

Add a helix move at location, if location is end location(append) then the reference is not relevant
Created in NX11.0.2.

License requirements : None

Parameters

data	data
location	location
referenceEvent	referenceevent

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::AddLevelMarker	(	NXOpen::CAM::PathLevelMarker *	data,
		NXOpen::CAM::CamPathToolpathEventLocation	location,
		NXOpen::CAM::PathEvent *	referenceEvent
	)

Add a level marker event at location, if location is end location(append) then the reference is not relevant
Created in NX11.0.2.

License requirements : None

Parameters

data	data
location	location
referenceEvent	referenceevent

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::AddLinearMotion	(	NXOpen::CAM::PathLinearMotion *	data,
		NXOpen::CAM::CamPathToolpathEventLocation	location,
		NXOpen::CAM::PathEvent *	referenceEvent
	)

Add a linear move at location, if location is end location(append) then the reference is not relevant
Created in NX11.0.2.

License requirements : None

Parameters

data	data
location	location
referenceEvent	referenceevent

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::AddMarker	(	NXOpen::CAM::PathMarker *	data,
		NXOpen::CAM::CamPathToolpathEventLocation	location,
		NXOpen::CAM::PathEvent *	referenceEvent
	)

Add a marker event at location, if location is end location(append) then the reference is not relevant
Created in NX12.0.1.

License requirements : None

Parameters

data	data
location	location
referenceEvent	referenceevent

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::AddUde	(	const NXString &	udeName,
		NXOpen::CAM::CamPathToolpathEventLocation	location,
		NXOpen::CAM::PathEvent *	referenceEvent
	)

Add a helix move at location, if location is end location(append) then the reference is not relevant
Created in NX11.0.2.

License requirements : None

Parameters

udeName	ude name
location	location
referenceEvent	referenceevent

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::AddUde	(	const char *	udeName,
		NXOpen::CAM::CamPathToolpathEventLocation	location,
		NXOpen::CAM::PathEvent *	referenceEvent
	)

Add a helix move at location, if location is end location(append) then the reference is not relevant
Created in NX11.0.2.

License requirements : None

Parameters

udeName	ude name
location	location
referenceEvent	referenceevent

void NXOpen::CAM::Path::AppendCircularMotion ( NXOpen::CAM::PathCircularMotion * data )

Append a circular move
Created in NX10.0.1.

License requirements : None

Parameters

data data

void NXOpen::CAM::Path::AppendHelixMotion ( NXOpen::CAM::PathHelixMotion * data )

Append a helical move
Created in NX10.0.2.

License requirements : None

Parameters

data data

void NXOpen::CAM::Path::AppendLevelMarker ( NXOpen::CAM::PathLevelMarker * data )

Append a level marker
Created in NX10.0.3.

License requirements : None

Parameters

data data

void NXOpen::CAM::Path::AppendLinearMotion ( NXOpen::CAM::PathLinearMotion * data )

Append a linear move
Created in NX10.0.1.

License requirements : None

Parameters

data data

void NXOpen::CAM::Path::AppendMarker ( NXOpen::CAM::PathMarker * data )

Append a marker
Created in NX12.0.1.

License requirements : None

Parameters

data data

void NXOpen::CAM::Path::AppendUde ( const NXString & udeName )

Append an ude of name with default values
Created in NX10.0.1.

License requirements : None

Parameters

udeName ude name

void NXOpen::CAM::Path::AppendUde ( const char * udeName )

Append an ude of name with default values
Created in NX10.0.1.

License requirements : None

Parameters

udeName ude name

NXOpen::CAM::CamPathContactType NXOpen::CAM::Path::ContactType ( )

Returns the contact type of the path
Created in NX11.0.2.

License requirements : None

void NXOpen::CAM::Path::DeleteAllUdesOfName ( const NXString & udeName )

Clean up by deleting all Udes that have the specified name **
Created in NX11.0.2.

License requirements : None

Parameters

udeName udename

void NXOpen::CAM::Path::DeleteAllUdesOfName ( const char * udeName )

Clean up by deleting all Udes that have the specified name **
Created in NX11.0.2.

License requirements : None

Parameters

udeName udename

void NXOpen::CAM::Path::DeleteOneEvent ( int index )

Delete one event
Created in NX10.0.3.

License requirements : None

Parameters

index index

void NXOpen::CAM::Path::DeleteOneEvent ( NXOpen::CAM::PathEvent * pathEvent )

Delete one event
Created in NX11.0.2.

License requirements : None

Parameters

pathEvent pathevent

void NXOpen::CAM::Path::EmptyPath ( )

Empty the path by deleteing all events
Created in NX10.0.3.

License requirements : None

NXOpen::CAM::PathCircularMotion* NXOpen::CAM::Path::GetCircularMotion ( int index )

Get the data of the circular motion at the given index
Created in NX10.0.1.

License requirements : None

Parameters

index index

NXOpen::CAM::PathCircularMotion* NXOpen::CAM::Path::GetCircularMotion ( NXOpen::CAM::PathEvent * eventOfInterest )

Get the data of the circular motion at the given index
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest eventofinterest

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::GetFirstEvent ( )

Ask for the first path event **
Created in NX11.0.2.

License requirements : None

NXOpen::CAM::PathHelixMotion* NXOpen::CAM::Path::GetHelixMotion ( int index )

Get the data of the helix motion at the given index
Created in NX10.0.1.

License requirements : None

Parameters

index index

NXOpen::CAM::PathHelixMotion* NXOpen::CAM::Path::GetHelixMotion ( NXOpen::CAM::PathEvent * eventOfInterest )

Get the data of the helix motion event
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest eventofinterest

NXOpen::CAM::PathLaserOptimizationData* NXOpen::CAM::Path::GetLaserOptimizationData ( )

Get the laser optimization data
Created in NX9.0.3.

License requirements : None

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::GetLastEvent ( )

Ask for the last path event **
Created in NX11.0.2.

License requirements : None

NXOpen::CAM::PathLevelMarker* NXOpen::CAM::Path::GetLevelMarker ( int index )

Get the data of the level index at the given index
Created in NX10.0.3.

License requirements : None

Parameters

index index

NXOpen::CAM::PathLevelMarker* NXOpen::CAM::Path::GetLevelMarker ( NXOpen::CAM::PathEvent * eventOfInterest )

Get the data of the level marker event
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest eventofinterest

NXOpen::CAM::PathLinearMotion* NXOpen::CAM::Path::GetLinearMotion ( int index )

Get the data of the linear motion at the given index
Created in NX10.0.1.

License requirements : None

Parameters

index index

NXOpen::CAM::PathLinearMotion* NXOpen::CAM::Path::GetLinearMotion ( NXOpen::CAM::PathEvent * eventOfInterest )

Get the data of the linear motion
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest eventofinterest

NXOpen::CAM::PathMarker* NXOpen::CAM::Path::GetMarker ( int index )

Get the data of the marker at the given index
Created in NX12.0.1.

License requirements : None

Parameters

index index

NXOpen::CAM::PathMarker* NXOpen::CAM::Path::GetMarker ( NXOpen::CAM::PathEvent * eventOfInterest )

Get the data of the marker event
Created in NX12.0.1.

License requirements : None

Parameters

eventOfInterest eventofinterest

int NXOpen::CAM::Path::GetNumberOfFindings ( NXOpen::CAM::Path::FindingTypes type )

Get the number of findings given a finding type
Created in NX12.0.2.

License requirements : None

Parameters

type type

NXOpen::CAM::PathEvent* NXOpen::CAM::Path::GetToolpathEvent ( int eventNumber )

Get the tool path event for a given index
Created in NX11.0.2.

License requirements : None

Parameters

eventNumber eventnumber

NXOpen::CAM::CamPathToolpathEventType NXOpen::CAM::Path::GetToolpathEventType ( int eventNumber )

Get the tool path event type
Created in NX10.0.1.

License requirements : None

Parameters

eventNumber eventnumber

NXOpen::CAM::CamPathToolpathEventType NXOpen::CAM::Path::GetToolpathEventType ( NXOpen::CAM::PathEvent * pathEvent )

Get the tool path event type
Created in NX11.0.2.

License requirements : None

Parameters

pathEvent pathevent

NXOpen::CAM::Ude* NXOpen::CAM::Path::GetUde ( int index )

Get the UDE event at the given index
Created in NX10.0.1.

License requirements : None

Parameters

index index

NXOpen::CAM::Ude* NXOpen::CAM::Path::GetUde ( NXOpen::CAM::PathEvent * eventOfInterest )

Get the data of the Ude event
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest eventofinterest

void NXOpen::CAM::Path::InsertCircularMotionAfter	(	NXOpen::CAM::PathCircularMotion *	data,
		int	index
	)

Insert Circular Motion after indicated index
Created in NX10.0.1.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertCircularMotionBefore	(	NXOpen::CAM::PathCircularMotion *	data,
		int	index
	)

Insert Circular Motion before indicated index
Created in NX10.0.1.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertHelixMotionAfter	(	NXOpen::CAM::PathHelixMotion *	data,
		int	index
	)

Insert Helical Motion after indicated index
Created in NX10.0.2.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertHelixMotionBefore	(	NXOpen::CAM::PathHelixMotion *	data,
		int	index
	)

Insert Helical Motion before indicated index
Created in NX10.0.2.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertLevelMarkerAfter	(	NXOpen::CAM::PathLevelMarker *	data,
		int	index
	)

Insert a level marker after the specified index
Created in NX10.0.3.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertLevelMarkerBefore	(	NXOpen::CAM::PathLevelMarker *	data,
		int	index
	)

Insert a level marker before the specified index
Created in NX10.0.3.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertLinearMotionAfter	(	NXOpen::CAM::PathLinearMotion *	data,
		int	index
	)

Insert a linear move after the specified index*
Created in NX10.0.1.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertLinearMotionBefore	(	NXOpen::CAM::PathLinearMotion *	data,
		int	index
	)

Insert a linear move before the specified index
Created in NX10.0.1.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertMarkerAfter	(	NXOpen::CAM::PathMarker *	data,
		int	index
	)

Insert a marker after the specified index
Created in NX12.0.1.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertMarkerBefore	(	NXOpen::CAM::PathMarker *	data,
		int	index
	)

Insert a marker before the specified index
Created in NX12.0.1.

License requirements : None

Parameters

data	data
index	index

void NXOpen::CAM::Path::InsertUdeAfter	(	const NXString &	udeName,
		int	index
	)

Insert an ude of name with default values after the given index
Created in NX10.0.1.

License requirements : None

Parameters

udeName	ude name
index	index

void NXOpen::CAM::Path::InsertUdeAfter	(	const char *	udeName,
		int	index
	)

Insert an ude of name with default values after the given index
Created in NX10.0.1.

License requirements : None

Parameters

udeName	ude name
index	index

void NXOpen::CAM::Path::InsertUdeBefore	(	const NXString &	udeName,
		int	index
	)

Insert an ude of name with default values before the given index
Created in NX10.0.1.

License requirements : None

Parameters

udeName	ude name
index	index

void NXOpen::CAM::Path::InsertUdeBefore	(	const char *	udeName,
		int	index
	)

Insert an ude of name with default values before the given index
Created in NX10.0.1.

License requirements : None

Parameters

udeName	ude name
index	index

bool NXOpen::CAM::Path::IsToolpathEventAMotion	(	int	eventNumber,
		NXOpen::CAM::CamPathMotionType *	motionType,
		NXOpen::CAM::CamPathMotionShapeType *	motionShape
	)

Tell if the event is a motion.

EventNumber is 1 through n
Created in NX10.0.1.

License requirements : None

Parameters

eventNumber	eventnumber
motionType	motiontype
motionShape	motionshape

bool NXOpen::CAM::Path::IsToolpathEventAMotion	(	NXOpen::CAM::PathEvent *	eventOfInterest,
		NXOpen::CAM::CamPathMotionType *	motionType,
		NXOpen::CAM::CamPathMotionShapeType *	motionShape
	)

Tell if the event is a motion
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest	eventofinterest
motionType	motiontype
motionShape	motionshape

bool NXOpen::CAM::Path::IsToolpathEventUde	(	NXOpen::CAM::PathEvent *	eventOfInterest,
		NXString *	udeName
	)

Tell if the event is a ude
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest	eventofinterest
udeName	udename

void NXOpen::CAM::Path::MoveEvent	(	int	fromIndex,
		int	toIndex
	)

Move the event at index fromIndex to index toIndex.

Events toIndex, toIndex+1, toIndex+2, ... are shifted one position. I.e., toIndex i is shifted to toIndex i+1
Created in NX10.0.1.

License requirements : None

Parameters

fromIndex	fromindex
toIndex	toindex

void NXOpen::CAM::Path::MoveEvent	(	NXOpen::CAM::PathEvent *	eventToMove,
		NXOpen::CAM::CamPathToolpathEventLocation	location,
		NXOpen::CAM::PathEvent *	referenceEvent
	)

Move the event relative to the referenceEvent and the location.

If location is end location(append) then reference event is not relevant
Created in NX11.0.2.

License requirements : None

Parameters

eventToMove	eventtomove
location	location
referenceEvent	referenceevent

NXOpen::CAM::PathCircularMotion* NXOpen::CAM::Path::NewPathCircularMotion ( )

Constructs a new path circular motion object.

Returns: Created in NX10.0.1.

License requirements : None

NXOpen::CAM::PathHelixMotion* NXOpen::CAM::Path::NewPathHelixMotion ( )

Constructs a new path helix motion object.

Returns: Created in NX10.0.1.

License requirements : None

NXOpen::CAM::PathLinearMotion* NXOpen::CAM::Path::NewPathLinearMotion ( )

Constructs a new path linear motion object.

Returns: Created in NX10.0.1.

License requirements : None

NXOpen::CAM::PathMarker* NXOpen::CAM::Path::NewPathMarker ( NXOpen::CAM::PathMarker::Type markerType )

Constructs a new path marker object.

Returns: Created in NX12.0.1.

License requirements : None

Parameters

markerType markertype

int NXOpen::CAM::Path::NumberOfToolpathEvents ( )

Returns the number of tool path events
Created in NX10.0.1.

License requirements : None

void NXOpen::CAM::Path::SetCircularMotion	(	int	index,
		NXOpen::CAM::PathCircularMotion *	data
	)

Updates the data of the circular motion event at the given index
Created in NX10.0.1.

License requirements : None

Parameters

index	index
data	data

void NXOpen::CAM::Path::SetCircularMotion	(	NXOpen::CAM::PathEvent *	eventOfInterest,
		NXOpen::CAM::PathCircularMotion *	data
	)

Updates the data of the circular motion event
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest	eventofinterest
data	data

void NXOpen::CAM::Path::SetContactType ( NXOpen::CAM::CamPathContactType contactType )

Sets the contact type of the path
Created in NX11.0.2.

License requirements : cam_base ("CAM BASE")

Parameters

contactType contacttype

void NXOpen::CAM::Path::SetHelixMotion	(	int	index,
		NXOpen::CAM::PathHelixMotion *	data
	)

Updates the data of the helix motion event at the given index
Created in NX10.0.1.

License requirements : None

Parameters

index	index
data	data

void NXOpen::CAM::Path::SetHelixMotion	(	NXOpen::CAM::PathEvent *	eventOfInterest,
		NXOpen::CAM::PathHelixMotion *	data
	)

Updates the data of the helix motion event
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest	eventofinterest
data	data

void NXOpen::CAM::Path::SetLevelMarker	(	int	index,
		NXOpen::CAM::PathLevelMarker *	data
	)

Updates the data of the level marker event at the given index
Created in NX10.0.3.

License requirements : None

Parameters

index	index
data	data

void NXOpen::CAM::Path::SetLevelMarker	(	NXOpen::CAM::PathEvent *	eventOfInterest,
		NXOpen::CAM::PathLevelMarker *	data
	)

Updates the data of the level marker event
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest	eventofinterest
data	data

void NXOpen::CAM::Path::SetLinearMotion	(	int	index,
		NXOpen::CAM::PathLinearMotion *	data
	)

Updates the data of the linear motion event at the given index
Created in NX10.0.1.

License requirements : None

Parameters

index	index
data	data

void NXOpen::CAM::Path::SetLinearMotion	(	NXOpen::CAM::PathEvent *	eventOfInterest,
		NXOpen::CAM::PathLinearMotion *	data
	)

Updates the data of the linear motion event
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest	eventofinterest
data	data

void NXOpen::CAM::Path::SetMarker	(	int	index,
		NXOpen::CAM::PathMarker *	data
	)

Updates the data of the marker event at the given index
Created in NX12.0.1.

License requirements : None

Parameters

index	index
data	data

void NXOpen::CAM::Path::SetMarker	(	NXOpen::CAM::PathEvent *	eventOfInterest,
		NXOpen::CAM::PathMarker *	data
	)

Updates the data of the marker event
Created in NX12.0.1.

License requirements : None

Parameters

eventOfInterest	eventofinterest
data	data

void NXOpen::CAM::Path::SetUde	(	int	index,
		NXOpen::CAM::Ude *	data
	)

Set the UDE event at the given index; The CAM.Ude API object no longer is valid after this call
Created in NX10.0.1.

License requirements : None

Parameters

index	index
data	data

void NXOpen::CAM::Path::SetUde	(	NXOpen::CAM::PathEvent *	eventOfInterest,
		NXOpen::CAM::Ude *	data
	)

Updates the data of the ude event
Created in NX11.0.2.

License requirements : None

Parameters

eventOfInterest	eventofinterest
data	data

NXOpen::CAM::CamPathToolAxisType NXOpen::CAM::Path::ToolAxisType ( )

Returns the tool axis type of the path
Created in NX10.0.1.

License requirements : None

The documentation for this class was generated from the following file:

CAM_Path.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation