NXOpen C++ Reference Guide
|
Represents a cam preferences Builder
To create a new instance of this class, use NXOpen::CAM::CAMSession::CreateCamPreferences
Created in NX7.5.0.
More...
Public Member Functions | |
bool | AlwaysUpdateDialogs () |
Returns the auto update dialog Created in NX7.5.0. More... | |
bool | AutomaticallySetMachingData () |
Returns the auto maching data Created in NX7.5.0. More... | |
NXOpen::NXColor * | AuxiliaryFloorColor () |
Returns the auxiliary floor Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes | AuxiliaryFloorColorSelection () |
Returns the auxiliary floor selection. More... | |
NXOpen::NXColor * | BladeBlendColor () |
Returns the blade blend color Created in NX8.0.0. More... | |
NXOpen::NXColor * | BladeColor () |
Returns the blade color Created in NX8.0.0. More... | |
NXOpen::NXColor * | BlankColor () |
Returns the blank color Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::BlankSelectionTypes | BlankSelection () |
Returns the blank selection. More... | |
NXOpen::NXColor * | CheckColor () |
Returns the check color Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::CheckSelectionTypes | CheckSelection () |
Returns the check selection. More... | |
NXOpen::NXColor * | ClearanceColor () |
Returns the clearance color Created in NX7.5.0. More... | |
int | ClsfDecimals () |
Returns the clsf_decimals Created in NX7.5.0. More... | |
bool | ClsfForceLoadTurret () |
Returns the force load turret Created in NX7.5.0. More... | |
NXString | ConfigurationFile () |
Returns the configuration file Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::CsysInformationListingTypes | CsysInformationListing () |
Returns the base info Created in NX7.5.0. More... | |
bool | CsysOrientWcsToMcs () |
Returns the orient wcs to mcs Created in NX7.5.0. More... | |
NXOpen::NXColor * | CutAreaColor () |
Returns the cut area color Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::CutAreaSelectionTypes | CutAreaSelection () |
Returns the cut area selection. More... | |
bool | DisplaySelectedObjects () |
Returns the display selected objects Created in NX7.5.0. More... | |
bool | DisplayTurningIpw () |
Returns the display turning ipw Created in NX7.5.0. More... | |
NXOpen::NXColor * | DriveColor () |
Returns the drive color Created in NX7.5.0. More... | |
bool | EnableLevelBasedIpw () |
Returns the enable level based ipw Created in NX7.5.0. More... | |
double | FeatureRecognitionLenDiaRatio () |
Returns the feature recognition length diameter ratio Created in NX1847.0.0. More... | |
bool | ForceRegenerate () |
Returns the force regenerate Created in NX10.0.3. More... | |
bool | GeneratePaths () |
Returns the generate tool paths Created in NX7.5.0. More... | |
bool | GenerationFullRegeneration () |
Returns the full regeneration More... | |
bool | GenerationPauseAfterEachPath () |
Returns the pause after each path Created in NX7.5.0. More... | |
bool | GenerationRefreshBeforeEachPath () |
Returns the refresh before each path Created in NX7.5.0. More... | |
bool | GenerationSmartRegeneration () |
Returns the smart regeneration Created in NX10.0.3. More... | |
bool | GenerationUpdateInstances () |
Returns the update all instances Created in NX7.5.0. More... | |
NXString | GetDefaultConfigurationFile () |
Get the default configuration file Created in NX7.5.0. More... | |
NXString | GetDefaultIpwFolder () |
Get the ipw default folder Created in NX7.5.0. More... | |
NXString | GetDefaultTemplateFile () |
Get the default template file Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::SelectionTypes | GetSelection (NXOpen::CAM::Preferences::GeometryTypes geomType) |
The geometry selection type method Created in NX8.0.0. More... | |
NXOpen::NXColor * | HubColor () |
Returns the hub color Created in NX8.0.0. More... | |
bool | IncludeInstances () |
Returns the include instances Created in NX7.5.0. More... | |
int | IpwNeedleCountCoarse () |
Returns the coarse ipw needle count Created in NX9.0.3. More... | |
int | IpwNeedleCountFine () |
Returns the fine ipw needle count Created in NX9.0.3. More... | |
int | IpwNeedleCountMedium () |
Returns the medium ipw needle count Created in NX9.0.3. More... | |
double | IpwNeedleDistanceCoarse () |
Returns the coarse ipw needle distance Created in NX9.0.3. More... | |
double | IpwNeedleDistanceFine () |
Returns the fine ipw needle distance Created in NX9.0.3. More... | |
double | IpwNeedleDistanceMedium () |
Returns the medium ipw needle distance Created in NX9.0.3. More... | |
NXString | IpwPartsFolder () |
Returns the ipw parts folder Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::IpwToleranceModeTypes | IpwToleranceMode () |
Returns the ipw tolerance mode Created in NX9.0.3. More... | |
bool | IpwUseDirectoryOfOriginalPart () |
Returns the use directory original part Created in NX7.5.0. More... | |
bool | LinkMcsRcs () |
Returns the link mcs rcs Created in NX7.5.0. More... | |
NXOpen::NXColor * | OptimizedCutLevelColor () |
Returns the optimized cut level Created in NX7.5.0. More... | |
NXOpen::NXColor * | PartColor () |
Returns the part color Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::PartSelectionTypes | PartSelection () |
Returns the part selection. More... | |
bool | RelocateParameters () |
Returns the relocate parameters Created in NX7.5.0. More... | |
bool | ReplayRefreshBeforeEachPath () |
Returns the refresh before each path replay Created in NX7.5.0. More... | |
bool | RunProcessAssistant () |
Returns the process assistant Created in NX7.5.0. More... | |
double | SaveIpwAfterCuttingLength () |
Returns the cutting length threshold that controls when an IPW will be saved Created in NX12.0.2. More... | |
bool | SaveIpwModel () |
Returns the ipw model Created in NX7.5.0. More... | |
bool | SaveLevelBasedIpw () |
Returns the level based ipw Created in NX7.5.0. More... | |
int | ScrollAreaSize () |
Returns the scrollable items Created in NX7.5.0. More... | |
void | SetAlwaysUpdateDialogs (bool alwaysUpdateDialogs) |
Sets the auto update dialog Created in NX7.5.0. More... | |
void | SetAutomaticallySetMachingData (bool autoMachingData) |
Sets the auto maching data Created in NX7.5.0. More... | |
void | SetAuxiliaryFloorColor (NXOpen::NXColor *auxiliaryFloor) |
Sets the auxiliary floor Created in NX7.5.0. More... | |
void | SetAuxiliaryFloorColorSelection (NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes auxiliaryFloorSelection) |
Sets the auxiliary floor selection. More... | |
void | SetBladeBlendColor (NXOpen::NXColor *bladeBlend) |
Sets the blade blend color Created in NX8.0.0. More... | |
void | SetBladeColor (NXOpen::NXColor *blade) |
Sets the blade color Created in NX8.0.0. More... | |
void | SetBlankColor (NXOpen::NXColor *blankColor) |
Sets the blank color Created in NX7.5.0. More... | |
void | SetBlankSelection (NXOpen::CAM::Preferences::BlankSelectionTypes blankSelection) |
Sets the blank selection. More... | |
void | SetCheckColor (NXOpen::NXColor *checkColor) |
Sets the check color Created in NX7.5.0. More... | |
void | SetCheckSelection (NXOpen::CAM::Preferences::CheckSelectionTypes checkSelection) |
Sets the check selection. More... | |
void | SetClearanceColor (NXOpen::NXColor *clearanceColor) |
Sets the clearance color Created in NX7.5.0. More... | |
void | SetClsfDecimals (int decimals) |
Sets the clsf_decimals Created in NX7.5.0. More... | |
void | SetClsfForceLoadTurret (bool forceLoadTurret) |
Sets the force load turret Created in NX7.5.0. More... | |
void | SetConfigurationFile (const NXString &fileName) |
Sets the configuration file Created in NX7.5.0. More... | |
void | SetConfigurationFile (const char *fileName) |
Sets the configuration file Created in NX7.5.0. More... | |
void | SetCsysInformationListing (NXOpen::CAM::Preferences::CsysInformationListingTypes baseInfo) |
Sets the base info Created in NX7.5.0. More... | |
void | SetCsysOrientWcsToMcs (bool orientWcsToMcs) |
Sets the orient wcs to mcs Created in NX7.5.0. More... | |
void | SetCutAreaColor (NXOpen::NXColor *cutAreaColor) |
Sets the cut area color Created in NX7.5.0. More... | |
void | SetCutAreaSelection (NXOpen::CAM::Preferences::CutAreaSelectionTypes cutAreaSelection) |
Sets the cut area selection. More... | |
void | SetDisplaySelectedObjects (bool displaySelectedObjects) |
Sets the display selected objects Created in NX7.5.0. More... | |
void | SetDisplayTurningIpw (bool displayTurningIpw) |
Sets the display turning ipw Created in NX7.5.0. More... | |
void | SetDriveColor (NXOpen::NXColor *driveColor) |
Sets the drive color Created in NX7.5.0. More... | |
void | SetEnableLevelBasedIpw (bool enableLevelBasedIpw) |
Sets the enable level based ipw Created in NX7.5.0. More... | |
void | SetFeatureRecognitionLenDiaRatio (double ldr) |
Sets the feature recognition length diameter ratio Created in NX1847.0.0. More... | |
void | SetForceRegenerate (bool isForceRegenerate) |
Sets the force regenerate Created in NX10.0.3. More... | |
void | SetGeneratePaths (bool generatePaths) |
Sets the generate tool paths Created in NX7.5.0. More... | |
void | SetGenerationFullRegeneration (bool fullRegeneration) |
Sets the full regeneration More... | |
void | SetGenerationPauseAfterEachPath (bool pauseAfterEachPath) |
Sets the pause after each path Created in NX7.5.0. More... | |
void | SetGenerationRefreshBeforeEachPath (bool refreshBeforeEachPath) |
Sets the refresh before each path Created in NX7.5.0. More... | |
void | SetGenerationSmartRegeneration (bool smartRegeneration) |
Sets the smart regeneration Created in NX10.0.3. More... | |
void | SetGenerationUpdateInstances (bool updateInstances) |
Sets the update all instances Created in NX7.5.0. More... | |
void | SetHubColor (NXOpen::NXColor *hub) |
Sets the hub color Created in NX8.0.0. More... | |
void | SetIncludeInstances (bool includeInstances) |
Sets the include instances Created in NX7.5.0. More... | |
void | SetIpwNeedleCountCoarse (int count) |
Sets the coarse ipw needle count Created in NX9.0.3. More... | |
void | SetIpwNeedleCountFine (int count) |
Sets the fine ipw needle count Created in NX9.0.3. More... | |
void | SetIpwNeedleCountMedium (int count) |
Sets the medium ipw needle count Created in NX9.0.3. More... | |
void | SetIpwNeedleDistanceCoarse (double distance) |
Sets the coarse ipw needle distance Created in NX9.0.3. More... | |
void | SetIpwNeedleDistanceFine (double distance) |
Sets the fine ipw needle distance Created in NX9.0.3. More... | |
void | SetIpwNeedleDistanceMedium (double distance) |
Sets the medium ipw needle distance Created in NX9.0.3. More... | |
void | SetIpwPartsFolder (const NXString &foldername) |
Sets the ipw parts folder Created in NX7.5.0. More... | |
void | SetIpwPartsFolder (const char *foldername) |
Sets the ipw parts folder Created in NX7.5.0. More... | |
void | SetIpwToleranceMode (NXOpen::CAM::Preferences::IpwToleranceModeTypes mode) |
Sets the ipw tolerance mode Created in NX9.0.3. More... | |
void | SetIpwUseDirectoryOfOriginalPart (bool useIpwDirectoryOfOriginalPart) |
Sets the use directory original part Created in NX7.5.0. More... | |
void | SetLinkMcsRcs (bool linkMcsRcs) |
Sets the link mcs rcs Created in NX7.5.0. More... | |
void | SetOptimizedCutLevelColor (NXOpen::NXColor *optimizedCutLevel) |
Sets the optimized cut level Created in NX7.5.0. More... | |
void | SetPartColor (NXOpen::NXColor *partColor) |
Sets the part color Created in NX7.5.0. More... | |
void | SetPartSelection (NXOpen::CAM::Preferences::PartSelectionTypes partSelection) |
Sets the part selection. More... | |
void | SetRelocateParameters (bool relocateParameters) |
Sets the relocate parameters Created in NX7.5.0. More... | |
void | SetReplayRefreshBeforeEachPath (bool refreshBeforeEachPath) |
Sets the refresh before each path replay Created in NX7.5.0. More... | |
void | SetRunProcessAssistant (bool processAssistant) |
Sets the process assistant Created in NX7.5.0. More... | |
void | SetSaveIpwAfterCuttingLength (double cuttingLength) |
Sets the cutting length threshold that controls when an IPW will be saved Created in NX12.0.2. More... | |
void | SetSaveIpwModel (bool ipwModel) |
Sets the ipw model Created in NX7.5.0. More... | |
void | SetSaveLevelBasedIpw (bool levelBasedIpw) |
Sets the level based ipw Created in NX7.5.0. More... | |
void | SetScrollAreaSize (int scrollableItems) |
Sets the scrollable items Created in NX7.5.0. More... | |
void | SetSelection (NXOpen::CAM::Preferences::GeometryTypes geomType, NXOpen::CAM::Preferences::SelectionTypes selection) |
The geometry selection type method Created in NX8.0.0. More... | |
void | SetShowPictures (bool showPictures) |
Sets the show pictures Created in NX7.5.0. More... | |
void | SetShroudColor (NXOpen::NXColor *shroud) |
Sets the shroud color Created in NX8.0.0. More... | |
void | SetSplitterColor (NXOpen::NXColor *splitter) |
Sets the splitter color Created in NX8.0.0. More... | |
void | SetStepoverDisplayAsNCM (bool bStepOverAsNCM) |
Sets the stepover move display as non cutting move Created in NX11.0.2. More... | |
void | SetSuspectBoundingBoxColor (NXOpen::NXColor *suspectBoundingBoxColor) |
Sets the suspect bounding box color Created in NX7.5.0. More... | |
void | SetTemplateFile (const NXString &fileName) |
Sets the template file Created in NX7.5.0. More... | |
void | SetTemplateFile (const char *fileName) |
Sets the template file Created in NX7.5.0. More... | |
void | SetTopOffLevelColor (NXOpen::NXColor *topOffLevel) |
Sets the top off level Created in NX7.5.0. More... | |
void | SetTrimColor (NXOpen::NXColor *trimColor) |
Sets the trim color Created in NX7.5.0. More... | |
void | SetUncutRegionColor (NXOpen::NXColor *uncutRegionColor) |
Sets the uncut region color Created in NX7.5.0. More... | |
void | SetUnlinkInstances (bool unlinkInstances) |
Sets the unlink instances Created in NX7.5.0. More... | |
void | SetVisualize2dTool1Color (NXOpen::NXColor *toolColor) |
Sets the tool color1 More... | |
void | SetVisualize2dTool2Color (NXOpen::NXColor *toolColor) |
Sets the tool color2 More... | |
void | SetVisualize2dTool3Color (NXOpen::NXColor *toolColor) |
Sets the tool color3 More... | |
void | SetVisualize2dTool4Color (NXOpen::NXColor *toolColor) |
Sets the tool color4 More... | |
void | SetVisualize2dTool5Color (NXOpen::NXColor *toolColor) |
Sets the tool color5 More... | |
void | SetVisualizeAnimationAccuracy (NXOpen::CAM::Preferences::AnimationAccuracyTypes animationAccuracy) |
Sets the animation accuracy Created in NX7.5.0. More... | |
void | SetVisualizeAutoBlockColor (NXOpen::NXColor *autoBlockColor) |
Sets the auto block color More... | |
void | SetVisualizeBackgroundColor (NXOpen::NXColor *backgroundColor) |
Sets the background color Created in NX7.5.0. More... | |
void | SetVisualizeChordalTolerance (double chordalTolerance) |
Sets the chordal tolerance Created in NX7.5.0. More... | |
void | SetVisualizeCollisionsColor (NXOpen::NXColor *collisionsColor) |
Sets the collisions color Created in NX7.5.0. More... | |
void | SetVisualizeDynamicToolAxis (bool dynToolAxis) |
Sets the dynamic tool axis Created in NX8.0.0. More... | |
void | SetVisualizeExcessMaterialColor (NXOpen::NXColor *excessMaterialColor) |
Sets the excess material color Created in NX7.5.0. More... | |
void | SetVisualizeGougesColor (NXOpen::NXColor *gougesColor) |
Sets the gouges color Created in NX7.5.0. More... | |
void | SetVisualizeIpwColor (NXOpen::NXColor *ipwColor) |
Sets the ipw color Created in NX7.5.0. More... | |
void | SetVisualizeIpwDmrColor1 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color1. More... | |
void | SetVisualizeIpwDmrColor10 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color10. More... | |
void | SetVisualizeIpwDmrColor11 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color11. More... | |
void | SetVisualizeIpwDmrColor12 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color12. More... | |
void | SetVisualizeIpwDmrColor13 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color13. More... | |
void | SetVisualizeIpwDmrColor2 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color2. More... | |
void | SetVisualizeIpwDmrColor3 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color3. More... | |
void | SetVisualizeIpwDmrColor4 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color4. More... | |
void | SetVisualizeIpwDmrColor5 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color5. More... | |
void | SetVisualizeIpwDmrColor6 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color6. More... | |
void | SetVisualizeIpwDmrColor7 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color7. More... | |
void | SetVisualizeIpwDmrColor8 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color8. More... | |
void | SetVisualizeIpwDmrColor9 (NXOpen::NXColor *ipwColor) |
Sets the ipw dmr color9. More... | |
void | SetVisualizeIpwDmrColoringMode (NXOpen::CAM::Preferences::IpwDmrColoringTypes coloring) |
Sets the ipw dmr coloring mode Created in NX9.0.0. More... | |
void | SetVisualizeIpwTranslucency (int ipwTranslucency) |
Sets the ipw translucency Created in NX7.5.0. More... | |
void | SetVisualizeSafeToolColor (NXOpen::NXColor *safeToolColor) |
Sets the safe tool color Created in NX7.5.2. More... | |
void | SetVisualizeTemporaryContainmentCurveColor (NXOpen::NXColor *temporaryContainmentCurveColor) |
Sets the temporary containment curve color Created in NX7.5.0. More... | |
void | SetVisualizeToolAxisTiltTolerance (double tiltTolerance) |
Sets the tilt tolerance Created in NX7.5.0. More... | |
void | SetVisualizeToolDisplayColor (NXOpen::NXColor *toolDisplayColor) |
Sets the tool display color Created in NX7.5.0. More... | |
void | SetVisualizeToolEditAndDisplay (bool toolDisplayColor) |
Sets the tool edit and display Created in NX8.0.0. More... | |
void | SetVisualizeToolHolderColor (NXOpen::NXColor *holderColor) |
Sets the tool holder color Created in NX8.0.0. More... | |
void | SetVisualizeToolInsertOrFluteColor (NXOpen::NXColor *color) |
Sets the turning tool insert Created in NX7.5.0. More... | |
void | SetVisualizeToolShankColor (NXOpen::NXColor *shankColor) |
Sets the tool shank color Created in NX8.0.0. More... | |
void | SetVisualizeToolTranslucency (int toolTranslucency) |
Sets the tool translucency Created in NX8.0.0. More... | |
void | SetWallColor (NXOpen::NXColor *wallColor) |
Sets the wall color Created in NX7.5.0. More... | |
void | SetWallSelection (NXOpen::CAM::Preferences::WallSelectionTypes wallSelection) |
Sets the wall selection. More... | |
bool | ShowPictures () |
Returns the show pictures Created in NX7.5.0. More... | |
NXOpen::NXColor * | ShroudColor () |
Returns the shroud color Created in NX8.0.0. More... | |
NXOpen::NXColor * | SplitterColor () |
Returns the splitter color Created in NX8.0.0. More... | |
bool | StepoverDisplayAsNCM () |
Returns the stepover move display as non cutting move Created in NX11.0.2. More... | |
NXOpen::NXColor * | SuspectBoundingBoxColor () |
Returns the suspect bounding box color Created in NX7.5.0. More... | |
NXString | TemplateFile () |
Returns the template file Created in NX7.5.0. More... | |
NXOpen::NXColor * | TopOffLevelColor () |
Returns the top off level Created in NX7.5.0. More... | |
NXOpen::NXColor * | TrimColor () |
Returns the trim color Created in NX7.5.0. More... | |
NXOpen::NXColor * | UncutRegionColor () |
Returns the uncut region color Created in NX7.5.0. More... | |
bool | UnlinkInstances () |
Returns the unlink instances Created in NX7.5.0. More... | |
NXOpen::NXColor * | Visualize2dTool1Color () |
Returns the tool color1 More... | |
NXOpen::NXColor * | Visualize2dTool2Color () |
Returns the tool color2 More... | |
NXOpen::NXColor * | Visualize2dTool3Color () |
Returns the tool color3 More... | |
NXOpen::NXColor * | Visualize2dTool4Color () |
Returns the tool color4 More... | |
NXOpen::NXColor * | Visualize2dTool5Color () |
Returns the tool color5 More... | |
NXOpen::CAM::Preferences::AnimationAccuracyTypes | VisualizeAnimationAccuracy () |
Returns the animation accuracy Created in NX7.5.0. More... | |
NXOpen::NXColor * | VisualizeAutoBlockColor () |
Returns the auto block color More... | |
NXOpen::NXColor * | VisualizeBackgroundColor () |
Returns the background color Created in NX7.5.0. More... | |
double | VisualizeChordalTolerance () |
Returns the chordal tolerance Created in NX7.5.0. More... | |
NXOpen::NXColor * | VisualizeCollisionsColor () |
Returns the collisions color Created in NX7.5.0. More... | |
bool | VisualizeDynamicToolAxis () |
Returns the dynamic tool axis Created in NX8.0.0. More... | |
NXOpen::NXColor * | VisualizeExcessMaterialColor () |
Returns the excess material color Created in NX7.5.0. More... | |
NXOpen::NXColor * | VisualizeGougesColor () |
Returns the gouges color Created in NX7.5.0. More... | |
NXOpen::NXColor * | VisualizeIpwColor () |
Returns the ipw color Created in NX7.5.0. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor1 () |
Returns the ipw dmr color1. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor10 () |
Returns the ipw dmr color10. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor11 () |
Returns the ipw dmr color11. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor12 () |
Returns the ipw dmr color12. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor13 () |
Returns the ipw dmr color13. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor2 () |
Returns the ipw dmr color2. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor3 () |
Returns the ipw dmr color3. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor4 () |
Returns the ipw dmr color4. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor5 () |
Returns the ipw dmr color5. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor6 () |
Returns the ipw dmr color6. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor7 () |
Returns the ipw dmr color7. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor8 () |
Returns the ipw dmr color8. More... | |
NXOpen::NXColor * | VisualizeIpwDmrColor9 () |
Returns the ipw dmr color9. More... | |
NXOpen::CAM::Preferences::IpwDmrColoringTypes | VisualizeIpwDmrColoringMode () |
Returns the ipw dmr coloring mode Created in NX9.0.0. More... | |
int | VisualizeIpwTranslucency () |
Returns the ipw translucency Created in NX7.5.0. More... | |
NXOpen::NXColor * | VisualizeSafeToolColor () |
Returns the safe tool color Created in NX7.5.2. More... | |
NXOpen::NXColor * | VisualizeTemporaryContainmentCurveColor () |
Returns the temporary containment curve color Created in NX7.5.0. More... | |
double | VisualizeToolAxisTiltTolerance () |
Returns the tilt tolerance Created in NX7.5.0. More... | |
NXOpen::NXColor * | VisualizeToolDisplayColor () |
Returns the tool display color Created in NX7.5.0. More... | |
bool | VisualizeToolEditAndDisplay () |
Returns the tool edit and display Created in NX8.0.0. More... | |
NXOpen::NXColor * | VisualizeToolHolderColor () |
Returns the tool holder color Created in NX8.0.0. More... | |
NXOpen::NXColor * | VisualizeToolInsertOrFluteColor () |
Returns the turning tool insert Created in NX7.5.0. More... | |
NXOpen::NXColor * | VisualizeToolShankColor () |
Returns the tool shank color Created in NX8.0.0. More... | |
int | VisualizeToolTranslucency () |
Returns the tool translucency Created in NX8.0.0. More... | |
NXOpen::NXColor * | WallColor () |
Returns the wall color Created in NX7.5.0. More... | |
NXOpen::CAM::Preferences::WallSelectionTypes | WallSelection () |
Returns the wall selection. More... | |
Public Member Functions inherited from NXOpen::Builder | |
NXOpen::NXObject * | Commit () |
Commits any edits that have been applied to the builder. More... | |
void | Destroy () |
Deletes the builder, and cleans up any objects created by the builder. More... | |
std::vector< NXOpen::NXObject * > | GetCommittedObjects () |
For builders that create more than one object, this method returns the objects that are created by commit. More... | |
NXOpen::NXObject * | GetObject () |
Returns the object currently being edited by this builder. More... | |
void | ShowResults () |
Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
virtual bool | Validate () |
Validate whether the inputs to the component are sufficient for commit to be called. More... | |
Public Member Functions inherited from NXOpen::TaggedObject | |
tag_t | Tag () const |
Returns the tag of this object. More... | |
Represents a cam preferences Builder
To create a new instance of this class, use NXOpen::CAM::CAMSession::CreateCamPreferences
Created in NX7.5.0.
the auxiliary floor selection types.
Enumerator | |
---|---|
AuxiliaryFloorColorSelectionTypesBodies |
Bodies. |
AuxiliaryFloorColorSelectionTypesFaces |
Faces. |
AuxiliaryFloorColorSelectionTypesSurfaceRegion |
Surface Region. |
the blank selection types.
the check selection types.
Enumerator | |
---|---|
CheckSelectionTypesBodies |
Bodies. |
CheckSelectionTypesFaces |
Faces. |
CheckSelectionTypesCurves |
Curves. |
the cut area selection types.
Enumerator | |
---|---|
CutAreaSelectionTypesBodies |
Bodies. |
CutAreaSelectionTypesFaces |
Faces. |
CutAreaSelectionTypesSurfaceRegion |
Surface Region. |
the part selection types.
the selection types
the wall selection types.
Enumerator | |
---|---|
WallSelectionTypesBodies |
Bodies. |
WallSelectionTypesFaces |
Faces. |
WallSelectionTypesSurfaceRegion |
Surface Region. |
bool NXOpen::CAM::Preferences::AlwaysUpdateDialogs | ( | ) |
Returns the auto update dialog
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::AutomaticallySetMachingData | ( | ) |
Returns the auto maching data
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::AuxiliaryFloorColor | ( | ) |
Returns the auxiliary floor
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes NXOpen::CAM::Preferences::AuxiliaryFloorColorSelection | ( | ) |
Returns the auxiliary floor selection.
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::BladeBlendColor | ( | ) |
Returns the blade blend color
Created in NX8.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::BladeColor | ( | ) |
Returns the blade color
Created in NX8.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::BlankColor | ( | ) |
Returns the blank color
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::BlankSelectionTypes NXOpen::CAM::Preferences::BlankSelection | ( | ) |
Returns the blank selection.
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::CheckColor | ( | ) |
Returns the check color
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::CheckSelectionTypes NXOpen::CAM::Preferences::CheckSelection | ( | ) |
Returns the check selection.
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::ClearanceColor | ( | ) |
Returns the clearance color
Created in NX7.5.0.
License requirements : None
int NXOpen::CAM::Preferences::ClsfDecimals | ( | ) |
Returns the clsf_decimals
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::ClsfForceLoadTurret | ( | ) |
Returns the force load turret
Created in NX7.5.0.
License requirements : None
NXString NXOpen::CAM::Preferences::ConfigurationFile | ( | ) |
Returns the configuration file
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::CsysInformationListingTypes NXOpen::CAM::Preferences::CsysInformationListing | ( | ) |
Returns the base info
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::CsysOrientWcsToMcs | ( | ) |
Returns the orient wcs to mcs
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::CutAreaColor | ( | ) |
Returns the cut area color
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::CutAreaSelectionTypes NXOpen::CAM::Preferences::CutAreaSelection | ( | ) |
Returns the cut area selection.
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::DisplaySelectedObjects | ( | ) |
Returns the display selected objects
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::DisplayTurningIpw | ( | ) |
Returns the display turning ipw
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::DriveColor | ( | ) |
Returns the drive color
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::EnableLevelBasedIpw | ( | ) |
Returns the enable level based ipw
Created in NX7.5.0.
License requirements : None
double NXOpen::CAM::Preferences::FeatureRecognitionLenDiaRatio | ( | ) |
Returns the feature recognition length diameter ratio
Created in NX1847.0.0.
License requirements : None
bool NXOpen::CAM::Preferences::ForceRegenerate | ( | ) |
Returns the force regenerate
Created in NX10.0.3.
License requirements : None
bool NXOpen::CAM::Preferences::GeneratePaths | ( | ) |
Returns the generate tool paths
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::GenerationFullRegeneration | ( | ) |
Returns the full regeneration
Use CAM::Preferences::GenerationSmartRegeneration instead.
Created in NX9.0.3.
License requirements : None
bool NXOpen::CAM::Preferences::GenerationPauseAfterEachPath | ( | ) |
Returns the pause after each path
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::GenerationRefreshBeforeEachPath | ( | ) |
Returns the refresh before each path
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::GenerationSmartRegeneration | ( | ) |
Returns the smart regeneration
Created in NX10.0.3.
License requirements : None
bool NXOpen::CAM::Preferences::GenerationUpdateInstances | ( | ) |
Returns the update all instances
Created in NX7.5.0.
License requirements : None
NXString NXOpen::CAM::Preferences::GetDefaultConfigurationFile | ( | ) |
Get the default configuration file
Created in NX7.5.0.
License requirements : None
NXString NXOpen::CAM::Preferences::GetDefaultIpwFolder | ( | ) |
Get the ipw default folder
Created in NX7.5.0.
License requirements : None
NXString NXOpen::CAM::Preferences::GetDefaultTemplateFile | ( | ) |
Get the default template file
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::SelectionTypes NXOpen::CAM::Preferences::GetSelection | ( | NXOpen::CAM::Preferences::GeometryTypes | geomType | ) |
The geometry selection type method
Created in NX8.0.0.
License requirements : None
geomType | geomtype |
NXOpen::NXColor* NXOpen::CAM::Preferences::HubColor | ( | ) |
Returns the hub color
Created in NX8.0.0.
License requirements : None
bool NXOpen::CAM::Preferences::IncludeInstances | ( | ) |
Returns the include instances
Created in NX7.5.0.
License requirements : None
int NXOpen::CAM::Preferences::IpwNeedleCountCoarse | ( | ) |
Returns the coarse ipw needle count
Created in NX9.0.3.
License requirements : None
int NXOpen::CAM::Preferences::IpwNeedleCountFine | ( | ) |
Returns the fine ipw needle count
Created in NX9.0.3.
License requirements : None
int NXOpen::CAM::Preferences::IpwNeedleCountMedium | ( | ) |
Returns the medium ipw needle count
Created in NX9.0.3.
License requirements : None
double NXOpen::CAM::Preferences::IpwNeedleDistanceCoarse | ( | ) |
Returns the coarse ipw needle distance
Created in NX9.0.3.
License requirements : None
double NXOpen::CAM::Preferences::IpwNeedleDistanceFine | ( | ) |
Returns the fine ipw needle distance
Created in NX9.0.3.
License requirements : None
double NXOpen::CAM::Preferences::IpwNeedleDistanceMedium | ( | ) |
Returns the medium ipw needle distance
Created in NX9.0.3.
License requirements : None
NXString NXOpen::CAM::Preferences::IpwPartsFolder | ( | ) |
Returns the ipw parts folder
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::IpwToleranceModeTypes NXOpen::CAM::Preferences::IpwToleranceMode | ( | ) |
Returns the ipw tolerance mode
Created in NX9.0.3.
License requirements : None
bool NXOpen::CAM::Preferences::IpwUseDirectoryOfOriginalPart | ( | ) |
Returns the use directory original part
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::LinkMcsRcs | ( | ) |
Returns the link mcs rcs
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::OptimizedCutLevelColor | ( | ) |
Returns the optimized cut level
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::PartColor | ( | ) |
Returns the part color
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::PartSelectionTypes NXOpen::CAM::Preferences::PartSelection | ( | ) |
Returns the part selection.
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::RelocateParameters | ( | ) |
Returns the relocate parameters
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::ReplayRefreshBeforeEachPath | ( | ) |
Returns the refresh before each path replay
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::RunProcessAssistant | ( | ) |
Returns the process assistant
Created in NX7.5.0.
License requirements : None
double NXOpen::CAM::Preferences::SaveIpwAfterCuttingLength | ( | ) |
Returns the cutting length threshold that controls when an IPW will be saved
Created in NX12.0.2.
License requirements : None
bool NXOpen::CAM::Preferences::SaveIpwModel | ( | ) |
Returns the ipw model
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::SaveLevelBasedIpw | ( | ) |
Returns the level based ipw
Created in NX7.5.0.
License requirements : None
int NXOpen::CAM::Preferences::ScrollAreaSize | ( | ) |
Returns the scrollable items
Created in NX7.5.0.
License requirements : None
void NXOpen::CAM::Preferences::SetAlwaysUpdateDialogs | ( | bool | alwaysUpdateDialogs | ) |
Sets the auto update dialog
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
alwaysUpdateDialogs | alwaysupdatedialogs |
void NXOpen::CAM::Preferences::SetAutomaticallySetMachingData | ( | bool | autoMachingData | ) |
Sets the auto maching data
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
autoMachingData | automachingdata |
void NXOpen::CAM::Preferences::SetAuxiliaryFloorColor | ( | NXOpen::NXColor * | auxiliaryFloor | ) |
Sets the auxiliary floor
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
auxiliaryFloor | auxiliaryfloor |
void NXOpen::CAM::Preferences::SetAuxiliaryFloorColorSelection | ( | NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes | auxiliaryFloorSelection | ) |
Sets the auxiliary floor selection.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
auxiliaryFloorSelection | auxiliaryfloorselection |
void NXOpen::CAM::Preferences::SetBladeBlendColor | ( | NXOpen::NXColor * | bladeBlend | ) |
Sets the blade blend color
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
bladeBlend | bladeblend |
void NXOpen::CAM::Preferences::SetBladeColor | ( | NXOpen::NXColor * | blade | ) |
Sets the blade color
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
blade | blade |
void NXOpen::CAM::Preferences::SetBlankColor | ( | NXOpen::NXColor * | blankColor | ) |
Sets the blank color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
blankColor | blankcolor |
void NXOpen::CAM::Preferences::SetBlankSelection | ( | NXOpen::CAM::Preferences::BlankSelectionTypes | blankSelection | ) |
Sets the blank selection.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
blankSelection | blankselection |
void NXOpen::CAM::Preferences::SetCheckColor | ( | NXOpen::NXColor * | checkColor | ) |
Sets the check color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
checkColor | checkcolor |
void NXOpen::CAM::Preferences::SetCheckSelection | ( | NXOpen::CAM::Preferences::CheckSelectionTypes | checkSelection | ) |
Sets the check selection.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
checkSelection | checkselection |
void NXOpen::CAM::Preferences::SetClearanceColor | ( | NXOpen::NXColor * | clearanceColor | ) |
Sets the clearance color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
clearanceColor | clearancecolor |
void NXOpen::CAM::Preferences::SetClsfDecimals | ( | int | decimals | ) |
Sets the clsf_decimals
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
decimals | decimals |
void NXOpen::CAM::Preferences::SetClsfForceLoadTurret | ( | bool | forceLoadTurret | ) |
Sets the force load turret
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
forceLoadTurret | forceloadturret |
void NXOpen::CAM::Preferences::SetConfigurationFile | ( | const NXString & | fileName | ) |
Sets the configuration file
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
fileName | filename |
void NXOpen::CAM::Preferences::SetConfigurationFile | ( | const char * | fileName | ) |
Sets the configuration file
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
fileName | filename |
void NXOpen::CAM::Preferences::SetCsysInformationListing | ( | NXOpen::CAM::Preferences::CsysInformationListingTypes | baseInfo | ) |
Sets the base info
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
baseInfo | baseinfo |
void NXOpen::CAM::Preferences::SetCsysOrientWcsToMcs | ( | bool | orientWcsToMcs | ) |
Sets the orient wcs to mcs
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
orientWcsToMcs | orientwcstomcs |
void NXOpen::CAM::Preferences::SetCutAreaColor | ( | NXOpen::NXColor * | cutAreaColor | ) |
Sets the cut area color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
cutAreaColor | cutareacolor |
void NXOpen::CAM::Preferences::SetCutAreaSelection | ( | NXOpen::CAM::Preferences::CutAreaSelectionTypes | cutAreaSelection | ) |
Sets the cut area selection.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
cutAreaSelection | cutareaselection |
void NXOpen::CAM::Preferences::SetDisplaySelectedObjects | ( | bool | displaySelectedObjects | ) |
Sets the display selected objects
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
displaySelectedObjects | displayselectedobjects |
void NXOpen::CAM::Preferences::SetDisplayTurningIpw | ( | bool | displayTurningIpw | ) |
Sets the display turning ipw
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
displayTurningIpw | displayturningipw |
void NXOpen::CAM::Preferences::SetDriveColor | ( | NXOpen::NXColor * | driveColor | ) |
Sets the drive color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
driveColor | drivecolor |
void NXOpen::CAM::Preferences::SetEnableLevelBasedIpw | ( | bool | enableLevelBasedIpw | ) |
Sets the enable level based ipw
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
enableLevelBasedIpw | enablelevelbasedipw |
void NXOpen::CAM::Preferences::SetFeatureRecognitionLenDiaRatio | ( | double | ldr | ) |
Sets the feature recognition length diameter ratio
Created in NX1847.0.0.
License requirements : cam_base ("CAM BASE")
ldr | ldr |
void NXOpen::CAM::Preferences::SetForceRegenerate | ( | bool | isForceRegenerate | ) |
Sets the force regenerate
Created in NX10.0.3.
License requirements : cam_base ("CAM BASE")
isForceRegenerate | isforceregenerate |
void NXOpen::CAM::Preferences::SetGeneratePaths | ( | bool | generatePaths | ) |
Sets the generate tool paths
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
generatePaths | generatepaths |
void NXOpen::CAM::Preferences::SetGenerationFullRegeneration | ( | bool | fullRegeneration | ) |
Sets the full regeneration
Use CAM::Preferences::GenerationSmartRegeneration instead.
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
fullRegeneration | fullregeneration |
void NXOpen::CAM::Preferences::SetGenerationPauseAfterEachPath | ( | bool | pauseAfterEachPath | ) |
Sets the pause after each path
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
pauseAfterEachPath | pauseaftereachpath |
void NXOpen::CAM::Preferences::SetGenerationRefreshBeforeEachPath | ( | bool | refreshBeforeEachPath | ) |
Sets the refresh before each path
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
refreshBeforeEachPath | refreshbeforeeachpath |
void NXOpen::CAM::Preferences::SetGenerationSmartRegeneration | ( | bool | smartRegeneration | ) |
Sets the smart regeneration
Created in NX10.0.3.
License requirements : cam_base ("CAM BASE")
smartRegeneration | smartregeneration |
void NXOpen::CAM::Preferences::SetGenerationUpdateInstances | ( | bool | updateInstances | ) |
Sets the update all instances
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
updateInstances | updateinstances |
void NXOpen::CAM::Preferences::SetHubColor | ( | NXOpen::NXColor * | hub | ) |
Sets the hub color
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
hub | hub |
void NXOpen::CAM::Preferences::SetIncludeInstances | ( | bool | includeInstances | ) |
Sets the include instances
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
includeInstances | includeinstances |
void NXOpen::CAM::Preferences::SetIpwNeedleCountCoarse | ( | int | count | ) |
Sets the coarse ipw needle count
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
count | count |
void NXOpen::CAM::Preferences::SetIpwNeedleCountFine | ( | int | count | ) |
Sets the fine ipw needle count
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
count | count |
void NXOpen::CAM::Preferences::SetIpwNeedleCountMedium | ( | int | count | ) |
Sets the medium ipw needle count
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
count | count |
void NXOpen::CAM::Preferences::SetIpwNeedleDistanceCoarse | ( | double | distance | ) |
Sets the coarse ipw needle distance
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
distance | distance |
void NXOpen::CAM::Preferences::SetIpwNeedleDistanceFine | ( | double | distance | ) |
Sets the fine ipw needle distance
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
distance | distance |
void NXOpen::CAM::Preferences::SetIpwNeedleDistanceMedium | ( | double | distance | ) |
Sets the medium ipw needle distance
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
distance | distance |
void NXOpen::CAM::Preferences::SetIpwPartsFolder | ( | const NXString & | foldername | ) |
Sets the ipw parts folder
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
foldername | foldername |
void NXOpen::CAM::Preferences::SetIpwPartsFolder | ( | const char * | foldername | ) |
Sets the ipw parts folder
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
foldername | foldername |
void NXOpen::CAM::Preferences::SetIpwToleranceMode | ( | NXOpen::CAM::Preferences::IpwToleranceModeTypes | mode | ) |
Sets the ipw tolerance mode
Created in NX9.0.3.
License requirements : cam_base ("CAM BASE")
mode | mode |
void NXOpen::CAM::Preferences::SetIpwUseDirectoryOfOriginalPart | ( | bool | useIpwDirectoryOfOriginalPart | ) |
Sets the use directory original part
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
useIpwDirectoryOfOriginalPart | useipwdirectoryoforiginalpart |
void NXOpen::CAM::Preferences::SetLinkMcsRcs | ( | bool | linkMcsRcs | ) |
Sets the link mcs rcs
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
linkMcsRcs | linkmcsrcs |
void NXOpen::CAM::Preferences::SetOptimizedCutLevelColor | ( | NXOpen::NXColor * | optimizedCutLevel | ) |
Sets the optimized cut level
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
optimizedCutLevel | optimizedcutlevel |
void NXOpen::CAM::Preferences::SetPartColor | ( | NXOpen::NXColor * | partColor | ) |
Sets the part color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
partColor | partcolor |
void NXOpen::CAM::Preferences::SetPartSelection | ( | NXOpen::CAM::Preferences::PartSelectionTypes | partSelection | ) |
Sets the part selection.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
partSelection | partselection |
void NXOpen::CAM::Preferences::SetRelocateParameters | ( | bool | relocateParameters | ) |
Sets the relocate parameters
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
relocateParameters | relocateparameters |
void NXOpen::CAM::Preferences::SetReplayRefreshBeforeEachPath | ( | bool | refreshBeforeEachPath | ) |
Sets the refresh before each path replay
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
refreshBeforeEachPath | refreshbeforeeachpath |
void NXOpen::CAM::Preferences::SetRunProcessAssistant | ( | bool | processAssistant | ) |
Sets the process assistant
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
processAssistant | processassistant |
void NXOpen::CAM::Preferences::SetSaveIpwAfterCuttingLength | ( | double | cuttingLength | ) |
Sets the cutting length threshold that controls when an IPW will be saved
Created in NX12.0.2.
License requirements : cam_base ("CAM BASE")
cuttingLength | cuttinglength |
void NXOpen::CAM::Preferences::SetSaveIpwModel | ( | bool | ipwModel | ) |
Sets the ipw model
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
ipwModel | ipwmodel |
void NXOpen::CAM::Preferences::SetSaveLevelBasedIpw | ( | bool | levelBasedIpw | ) |
Sets the level based ipw
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
levelBasedIpw | levelbasedipw |
void NXOpen::CAM::Preferences::SetScrollAreaSize | ( | int | scrollableItems | ) |
Sets the scrollable items
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
scrollableItems | scrollableitems |
void NXOpen::CAM::Preferences::SetSelection | ( | NXOpen::CAM::Preferences::GeometryTypes | geomType, |
NXOpen::CAM::Preferences::SelectionTypes | selection | ||
) |
The geometry selection type method
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
geomType | geomtype |
selection | selection |
void NXOpen::CAM::Preferences::SetShowPictures | ( | bool | showPictures | ) |
Sets the show pictures
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
showPictures | showpictures |
void NXOpen::CAM::Preferences::SetShroudColor | ( | NXOpen::NXColor * | shroud | ) |
Sets the shroud color
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
shroud | shroud |
void NXOpen::CAM::Preferences::SetSplitterColor | ( | NXOpen::NXColor * | splitter | ) |
Sets the splitter color
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
splitter | splitter |
void NXOpen::CAM::Preferences::SetStepoverDisplayAsNCM | ( | bool | bStepOverAsNCM | ) |
Sets the stepover move display as non cutting move
Created in NX11.0.2.
License requirements : cam_base ("CAM BASE")
bStepOverAsNCM | bstepoverasncm |
void NXOpen::CAM::Preferences::SetSuspectBoundingBoxColor | ( | NXOpen::NXColor * | suspectBoundingBoxColor | ) |
Sets the suspect bounding box color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
suspectBoundingBoxColor | suspectboundingboxcolor |
void NXOpen::CAM::Preferences::SetTemplateFile | ( | const NXString & | fileName | ) |
Sets the template file
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
fileName | filename |
void NXOpen::CAM::Preferences::SetTemplateFile | ( | const char * | fileName | ) |
Sets the template file
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
fileName | filename |
void NXOpen::CAM::Preferences::SetTopOffLevelColor | ( | NXOpen::NXColor * | topOffLevel | ) |
Sets the top off level
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
topOffLevel | topofflevel |
void NXOpen::CAM::Preferences::SetTrimColor | ( | NXOpen::NXColor * | trimColor | ) |
Sets the trim color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
trimColor | trimcolor |
void NXOpen::CAM::Preferences::SetUncutRegionColor | ( | NXOpen::NXColor * | uncutRegionColor | ) |
Sets the uncut region color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
uncutRegionColor | uncutregioncolor |
void NXOpen::CAM::Preferences::SetUnlinkInstances | ( | bool | unlinkInstances | ) |
Sets the unlink instances
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
unlinkInstances | unlinkinstances |
void NXOpen::CAM::Preferences::SetVisualize2dTool1Color | ( | NXOpen::NXColor * | toolColor | ) |
Sets the tool color1
Use CAM::Preferences::SetVisualizeIpwDmrColor1 instead.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
toolColor | toolcolor |
void NXOpen::CAM::Preferences::SetVisualize2dTool2Color | ( | NXOpen::NXColor * | toolColor | ) |
Sets the tool color2
Use CAM::Preferences::SetVisualizeIpwDmrColor2 instead.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
toolColor | toolcolor |
void NXOpen::CAM::Preferences::SetVisualize2dTool3Color | ( | NXOpen::NXColor * | toolColor | ) |
Sets the tool color3
Use CAM::Preferences::SetVisualizeIpwDmrColor3 instead.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
toolColor | toolcolor |
void NXOpen::CAM::Preferences::SetVisualize2dTool4Color | ( | NXOpen::NXColor * | toolColor | ) |
Sets the tool color4
Use CAM::Preferences::SetVisualizeIpwDmrColor4 instead.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
toolColor | toolcolor |
void NXOpen::CAM::Preferences::SetVisualize2dTool5Color | ( | NXOpen::NXColor * | toolColor | ) |
Sets the tool color5
Use CAM::Preferences::SetVisualizeIpwDmrColor5 instead.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
toolColor | toolcolor |
void NXOpen::CAM::Preferences::SetVisualizeAnimationAccuracy | ( | NXOpen::CAM::Preferences::AnimationAccuracyTypes | animationAccuracy | ) |
Sets the animation accuracy
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
animationAccuracy | animationaccuracy |
void NXOpen::CAM::Preferences::SetVisualizeAutoBlockColor | ( | NXOpen::NXColor * | autoBlockColor | ) |
Sets the auto block color
Use CAM::Preferences::SetBlankColor instead.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
autoBlockColor | autoblockcolor |
void NXOpen::CAM::Preferences::SetVisualizeBackgroundColor | ( | NXOpen::NXColor * | backgroundColor | ) |
Sets the background color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
backgroundColor | backgroundcolor |
void NXOpen::CAM::Preferences::SetVisualizeChordalTolerance | ( | double | chordalTolerance | ) |
Sets the chordal tolerance
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
chordalTolerance | chordaltolerance |
void NXOpen::CAM::Preferences::SetVisualizeCollisionsColor | ( | NXOpen::NXColor * | collisionsColor | ) |
Sets the collisions color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
collisionsColor | collisionscolor |
void NXOpen::CAM::Preferences::SetVisualizeDynamicToolAxis | ( | bool | dynToolAxis | ) |
Sets the dynamic tool axis
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
dynToolAxis | dyntoolaxis |
void NXOpen::CAM::Preferences::SetVisualizeExcessMaterialColor | ( | NXOpen::NXColor * | excessMaterialColor | ) |
Sets the excess material color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
excessMaterialColor | excessmaterialcolor |
void NXOpen::CAM::Preferences::SetVisualizeGougesColor | ( | NXOpen::NXColor * | gougesColor | ) |
Sets the gouges color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
gougesColor | gougescolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwColor | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor1 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color1.
Depending on the coloring method, this color is interpreted as 1st cyclic color or tool type color for milling tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor10 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color10.
Depending on the coloring method, this color is interpreted as 10th cyclic color or tool type color for solid cutter tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor11 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color11.
Depending on the coloring method, this color is interpreted as 11th cyclic color or tool type color for mill forming tools.
Created in NX12.0.2.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor12 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color12.
Depending on the coloring method, this color is interpreted as 12th cyclic color or tool type color for drill SPC grooving tools.
Created in NX12.0.2.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor13 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color13.
Depending on the coloring method, this color is interpreted as 13th cyclic color or tool type color for laser tools.
Created in NX12.0.2.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor2 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color2.
Depending on the coloring method, this color is interpreted as 2nd cyclic color or tool type color for drilling tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor3 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color3.
Depending on the coloring method, this color is interpreted as 3rd cyclic color or tool type color for turning tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor4 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color4.
Depending on the coloring method, this color is interpreted as 4th cyclic color or tool type color for grooving tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor5 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color5.
Depending on the coloring method, this color is interpreted as 5th cyclic color or tool type color for threading tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor6 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color6.
Depending on the coloring method, this color is interpreted as 5th cyclic color or tool type color for wire EDM tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor7 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color7.
Depending on the coloring method, this color is interpreted as 7th cyclic color or tool type color for barrel tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor8 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color8.
Depending on the coloring method, this color is interpreted as 8th cyclic color or tool type color for T-cutter tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor9 | ( | NXOpen::NXColor * | ipwColor | ) |
Sets the ipw dmr color9.
Depending on the coloring method, this color is interpreted as 9th cyclic color or tool type color for forming tools.
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
ipwColor | ipwcolor |
void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColoringMode | ( | NXOpen::CAM::Preferences::IpwDmrColoringTypes | coloring | ) |
Sets the ipw dmr coloring mode
Created in NX9.0.0.
License requirements : cam_base ("CAM BASE")
coloring | coloring |
void NXOpen::CAM::Preferences::SetVisualizeIpwTranslucency | ( | int | ipwTranslucency | ) |
Sets the ipw translucency
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
ipwTranslucency | ipwtranslucency |
void NXOpen::CAM::Preferences::SetVisualizeSafeToolColor | ( | NXOpen::NXColor * | safeToolColor | ) |
Sets the safe tool color
Created in NX7.5.2.
License requirements : cam_base ("CAM BASE")
safeToolColor | safetoolcolor |
void NXOpen::CAM::Preferences::SetVisualizeTemporaryContainmentCurveColor | ( | NXOpen::NXColor * | temporaryContainmentCurveColor | ) |
Sets the temporary containment curve color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
temporaryContainmentCurveColor | temporarycontainmentcurvecolor |
void NXOpen::CAM::Preferences::SetVisualizeToolAxisTiltTolerance | ( | double | tiltTolerance | ) |
Sets the tilt tolerance
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
tiltTolerance | tilttolerance |
void NXOpen::CAM::Preferences::SetVisualizeToolDisplayColor | ( | NXOpen::NXColor * | toolDisplayColor | ) |
Sets the tool display color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
toolDisplayColor | tooldisplaycolor |
void NXOpen::CAM::Preferences::SetVisualizeToolEditAndDisplay | ( | bool | toolDisplayColor | ) |
Sets the tool edit and display
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
toolDisplayColor | tooldisplaycolor |
void NXOpen::CAM::Preferences::SetVisualizeToolHolderColor | ( | NXOpen::NXColor * | holderColor | ) |
Sets the tool holder color
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
holderColor | holder color |
void NXOpen::CAM::Preferences::SetVisualizeToolInsertOrFluteColor | ( | NXOpen::NXColor * | color | ) |
Sets the turning tool insert
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
color | color |
void NXOpen::CAM::Preferences::SetVisualizeToolShankColor | ( | NXOpen::NXColor * | shankColor | ) |
Sets the tool shank color
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
shankColor | shank color |
void NXOpen::CAM::Preferences::SetVisualizeToolTranslucency | ( | int | toolTranslucency | ) |
Sets the tool translucency
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
toolTranslucency | tooltranslucency |
void NXOpen::CAM::Preferences::SetWallColor | ( | NXOpen::NXColor * | wallColor | ) |
Sets the wall color
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
wallColor | wallcolor |
void NXOpen::CAM::Preferences::SetWallSelection | ( | NXOpen::CAM::Preferences::WallSelectionTypes | wallSelection | ) |
Sets the wall selection.
Created in NX7.5.0.
License requirements : cam_base ("CAM BASE")
wallSelection | wallselection |
bool NXOpen::CAM::Preferences::ShowPictures | ( | ) |
Returns the show pictures
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::ShroudColor | ( | ) |
Returns the shroud color
Created in NX8.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::SplitterColor | ( | ) |
Returns the splitter color
Created in NX8.0.0.
License requirements : None
bool NXOpen::CAM::Preferences::StepoverDisplayAsNCM | ( | ) |
Returns the stepover move display as non cutting move
Created in NX11.0.2.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::SuspectBoundingBoxColor | ( | ) |
Returns the suspect bounding box color
Created in NX7.5.0.
License requirements : None
NXString NXOpen::CAM::Preferences::TemplateFile | ( | ) |
Returns the template file
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::TopOffLevelColor | ( | ) |
Returns the top off level
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::TrimColor | ( | ) |
Returns the trim color
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::UncutRegionColor | ( | ) |
Returns the uncut region color
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::UnlinkInstances | ( | ) |
Returns the unlink instances
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool1Color | ( | ) |
Returns the tool color1
Use CAM::Preferences::VisualizeIpwDmrColor1 instead.
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool2Color | ( | ) |
Returns the tool color2
Use CAM::Preferences::VisualizeIpwDmrColor2 instead.
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool3Color | ( | ) |
Returns the tool color3
Use CAM::Preferences::VisualizeIpwDmrColor3 instead.
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool4Color | ( | ) |
Returns the tool color4
Use CAM::Preferences::VisualizeIpwDmrColor4 instead.
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool5Color | ( | ) |
Returns the tool color5
Use CAM::Preferences::VisualizeIpwDmrColor5 instead.
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::AnimationAccuracyTypes NXOpen::CAM::Preferences::VisualizeAnimationAccuracy | ( | ) |
Returns the animation accuracy
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeAutoBlockColor | ( | ) |
Returns the auto block color
Use CAM::Preferences::BlankColor instead.
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeBackgroundColor | ( | ) |
Returns the background color
Created in NX7.5.0.
License requirements : None
double NXOpen::CAM::Preferences::VisualizeChordalTolerance | ( | ) |
Returns the chordal tolerance
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeCollisionsColor | ( | ) |
Returns the collisions color
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::VisualizeDynamicToolAxis | ( | ) |
Returns the dynamic tool axis
Created in NX8.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeExcessMaterialColor | ( | ) |
Returns the excess material color
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeGougesColor | ( | ) |
Returns the gouges color
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwColor | ( | ) |
Returns the ipw color
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor1 | ( | ) |
Returns the ipw dmr color1.
Depending on the coloring method, this color is interpreted as 1st cyclic color or tool type color for milling tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor10 | ( | ) |
Returns the ipw dmr color10.
Depending on the coloring method, this color is interpreted as 10th cyclic color or tool type color for solid cutter tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor11 | ( | ) |
Returns the ipw dmr color11.
Depending on the coloring method, this color is interpreted as 11th cyclic color or tool type color for mill forming tools.
Created in NX12.0.2.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor12 | ( | ) |
Returns the ipw dmr color12.
Depending on the coloring method, this color is interpreted as 12th cyclic color or tool type color for drill SPC grooving tools.
Created in NX12.0.2.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor13 | ( | ) |
Returns the ipw dmr color13.
Depending on the coloring method, this color is interpreted as 13th cyclic color or tool type color for laser tools.
Created in NX12.0.2.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor2 | ( | ) |
Returns the ipw dmr color2.
Depending on the coloring method, this color is interpreted as 2nd cyclic color or tool type color for drilling tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor3 | ( | ) |
Returns the ipw dmr color3.
Depending on the coloring method, this color is interpreted as 3rd cyclic color or tool type color for turning tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor4 | ( | ) |
Returns the ipw dmr color4.
Depending on the coloring method, this color is interpreted as 4th cyclic color or tool type color for grooving tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor5 | ( | ) |
Returns the ipw dmr color5.
Depending on the coloring method, this color is interpreted as 5th cyclic color or tool type color for threading tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor6 | ( | ) |
Returns the ipw dmr color6.
Depending on the coloring method, this color is interpreted as 5th cyclic color or tool type color for wire EDM tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor7 | ( | ) |
Returns the ipw dmr color7.
Depending on the coloring method, this color is interpreted as 7th cyclic color or tool type color for barrel tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor8 | ( | ) |
Returns the ipw dmr color8.
Depending on the coloring method, this color is interpreted as 8th cyclic color or tool type color for T-cutter tools.
Created in NX9.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor9 | ( | ) |
Returns the ipw dmr color9.
Depending on the coloring method, this color is interpreted as 9th cyclic color or tool type color for forming tools.
Created in NX9.0.0.
License requirements : None
NXOpen::CAM::Preferences::IpwDmrColoringTypes NXOpen::CAM::Preferences::VisualizeIpwDmrColoringMode | ( | ) |
Returns the ipw dmr coloring mode
Created in NX9.0.0.
License requirements : None
int NXOpen::CAM::Preferences::VisualizeIpwTranslucency | ( | ) |
Returns the ipw translucency
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeSafeToolColor | ( | ) |
Returns the safe tool color
Created in NX7.5.2.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeTemporaryContainmentCurveColor | ( | ) |
Returns the temporary containment curve color
Created in NX7.5.0.
License requirements : None
double NXOpen::CAM::Preferences::VisualizeToolAxisTiltTolerance | ( | ) |
Returns the tilt tolerance
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeToolDisplayColor | ( | ) |
Returns the tool display color
Created in NX7.5.0.
License requirements : None
bool NXOpen::CAM::Preferences::VisualizeToolEditAndDisplay | ( | ) |
Returns the tool edit and display
Created in NX8.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeToolHolderColor | ( | ) |
Returns the tool holder color
Created in NX8.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeToolInsertOrFluteColor | ( | ) |
Returns the turning tool insert
Created in NX7.5.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeToolShankColor | ( | ) |
Returns the tool shank color
Created in NX8.0.0.
License requirements : None
int NXOpen::CAM::Preferences::VisualizeToolTranslucency | ( | ) |
Returns the tool translucency
Created in NX8.0.0.
License requirements : None
NXOpen::NXColor* NXOpen::CAM::Preferences::WallColor | ( | ) |
Returns the wall color
Created in NX7.5.0.
License requirements : None
NXOpen::CAM::Preferences::WallSelectionTypes NXOpen::CAM::Preferences::WallSelection | ( | ) |
Returns the wall selection.
Created in NX7.5.0.
License requirements : None