NXOpen C++ Reference Guide
|
Represents a NXOpen::Motion::BodyContactBuilder
To create a new instance of this class, use NXOpen::Motion::BodyContactCollection::CreateBodyContactBuilder
Default values.
More...
Public Types | |
enum | ContactTypeOption { ContactTypeOptionCADToCADContact, ContactTypeOptionSphereToCADContact } |
the contact type (3D Contact or Sphere to CAD Contact) More... | |
Public Member Functions | |
NXOpen::Motion::BodyContactAdams * | AdamsParameters () |
Returns the 3D BodyContact's subobject (the adams parameters) Created in NX5.0.0. More... | |
NXOpen::Motion::BodyContactBuilder::ContactTypeOption | ContactType () |
Returns the type: 3D contact or Sphere to CAD Created in NX12.0.0. More... | |
NXOpen::SelectNXObjectList * | FirstContactGeometry () |
Returns the selection of the first contact geometry More... | |
NXOpen::SelectNXObject * | FirstContactGeometryObject () |
Returns the selection of the first contact geometry Created in NX1847.0.0. More... | |
NXOpen::Motion::ParamOverrideState | FirstContactGeometryObjectOvrCtrl () |
Returns. More... | |
NXOpen::Motion::BodyContactLms * | LmsParameters () |
Returns the 3D BodyContact's subobject (the lms parameters) Created in NX10.0.0. More... | |
NXString | Name () |
Returns the name Created in NX6.0.0. More... | |
NXOpen::Motion::BodyContactRecurdyn * | RecurdynParameters () |
Returns the 3D BodyContact's subobject (the recurdyn parameters) Created in NX5.0.0. More... | |
NXOpen::SelectNXObjectList * | SecondContactGeometry () |
Returns the selection of the second contact geometry More... | |
NXOpen::SelectNXObject * | SecondContactGeometryObject () |
Returns the selection of the second contact geometry Created in NX1847.0.0. More... | |
NXOpen::Motion::ParamOverrideState | SecondContactGeometryObjectOvrCtrl () |
Returns. More... | |
void | SetContactType (NXOpen::Motion::BodyContactBuilder::ContactTypeOption type) |
Sets the type: 3D contact or Sphere to CAD Created in NX12.0.0. More... | |
void | SetFirstContactGeometryObjectOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets. More... | |
void | SetName (const NXString &name) |
Sets the name Created in NX6.0.0. More... | |
void | SetName (const char *name) |
Sets the name Created in NX6.0.0. More... | |
void | SetSecondContactGeometryObjectOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets. More... | |
void | SetSphereCenter (NXOpen::Point *sphereCenter) |
Sets the selection of sphere center for Sphere To CAD Created in NX12.0.0. More... | |
void | SetSphereCenterOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets. More... | |
void | SetSphereLinkOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets. More... | |
NXOpen::Point * | SphereCenter () |
Returns the selection of sphere center for Sphere To CAD Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | SphereCenterOvrCtrl () |
Returns. More... | |
NXOpen::Motion::SelectLink * | SphereLink () |
Returns the selection of sphere motion body for Sphere To CAD Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | SphereLinkOvrCtrl () |
Returns. More... | |
NXOpen::Motion::BodyContactSphereToCAD * | SphereToCadParameters () |
Returns the 3D BodyContact's subobject (the sphere to cad parameters) Created in NX12.0.0. More... | |
Public Member Functions inherited from NXOpen::Builder | |
NXOpen::NXObject * | Commit () |
Commits any edits that have been applied to the builder. More... | |
void | Destroy () |
Deletes the builder, and cleans up any objects created by the builder. More... | |
std::vector< NXOpen::NXObject * > | GetCommittedObjects () |
For builders that create more than one object, this method returns the objects that are created by commit. More... | |
NXOpen::NXObject * | GetObject () |
Returns the object currently being edited by this builder. More... | |
void | ShowResults () |
Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
virtual bool | Validate () |
Validate whether the inputs to the component are sufficient for commit to be called. More... | |
Public Member Functions inherited from NXOpen::TaggedObject | |
tag_t | Tag () const |
Returns the tag of this object. More... | |
Represents a NXOpen::Motion::BodyContactBuilder
To create a new instance of this class, use NXOpen::Motion::BodyContactCollection::CreateBodyContactBuilder
Default values.
Property | Value |
---|---|
AdamsParameters.CoulombFrictionOption |
Off |
AdamsParameters.DynamicCoefficientExpression.Value |
0.2 |
AdamsParameters.ForceExponentExpression.Value |
2.0 |
AdamsParameters.ForceModelType |
Impact |
AdamsParameters.FrictionVelocityExpression.Value |
0.1 (millimeters part), 0.003937 (inches part) |
AdamsParameters.MaterialDampingExpression.Value |
10000.0 (millimeters part), 57.0993 (inches part) |
AdamsParameters.PenetrationDepthExpression.Value |
0.01 (millimeters part), 0.0003937 (inches part) |
AdamsParameters.RestitutionCoefficentExpression.Value |
0.85 |
AdamsParameters.StaticCoefficientExpression.Value |
0.3 |
AdamsParameters.StictionVelocityExpression.Value |
0.01 (millimeters part), 0.0003937 (inches part) |
AdamsParameters.StiffnessExpression.Value |
100000000.0 (millimeters part), 570993.142 (inches part) |
LmsParameters.ActionAngleTolerance.Value |
25 |
LmsParameters.ActionDistanceTolerance.Value |
0.0 (millimeters part), 0.0 (inches part) |
LmsParameters.ActionEnableMaxFacetSize |
0 |
LmsParameters.ActionMaxFacetSize.Value |
1000 (millimeters part), 39.370078740157 (inches part) |
LmsParameters.ActionUseTessellationFile |
0 |
LmsParameters.BaseAngleTolerance.Value |
25 |
LmsParameters.BaseDistanceTolerance.Value |
0.0 (millimeters part), 0.0 (inches part) |
LmsParameters.BaseEnableMaxFacetSize |
0 |
LmsParameters.BaseMaxFacetSize.Value |
1000 (millimeters part), 39.370078740157 (inches part) |
LmsParameters.BaseUseTessellationFile |
0 |
LmsParameters.CoulombFrictionOption |
Off |
LmsParameters.DynamicCoefficient.Value |
0.2 |
LmsParameters.ForceExponent.Value |
2.0 |
LmsParameters.ForceModel |
Auto |
LmsParameters.ForceModelTolerance.Value |
5.0 (millimeters part), 0.196850393700787 (inches part) |
LmsParameters.FrictionVelocity.Value |
0.1 (millimeters part), 0.003937 (inches part) |
LmsParameters.MaterialDamping.Value |
10000.0 (millimeters part), 57.1014715473270000 (inches part) |
LmsParameters.MaxPenetrationDepth.Value |
0.0254 (millimeters part), 0.001 (inches part) |
LmsParameters.StaticCoefficient.Value |
0.3 |
LmsParameters.StictionVelocity.Value |
0.01 (millimeters part), 0.0003937 (inches part) |
LmsParameters.Stiffness.Value |
100000000.0 (millimeters part), 571014.71547327 (inches part) |
RecurdynParameters.BufferRadiusFactorExpression.Value |
1.2 |
RecurdynParameters.ContactTypeOption |
Solid |
RecurdynParameters.CoulombFrictionOption |
Off |
RecurdynParameters.DynamicCoefficientExpression.Value |
0.2 |
RecurdynParameters.FirstGeometryBoundingBufferLengthExpression.Value |
20 (millimeters part), 0.7874 (inches part) |
RecurdynParameters.FirstGeometryMaxFacetSizeFactorExpression.Value |
2.0 |
RecurdynParameters.FirstGeometryMaxFacetSizeFactorFlag |
False |
RecurdynParameters.FirstGeometryMaximumPenetrationExpression.Value |
1.0 (millimeters part), 0.03937 (inches part) |
RecurdynParameters.FirstGeometryPlaneToleranceFactorExpression.Value |
5.0 |
RecurdynParameters.FirstGeometryPlaneToleranceFactorSolidContactExpression.Value |
3.0 |
RecurdynParameters.ForceExponentExpression.Value |
2.0 |
RecurdynParameters.ForceModelType |
Impact |
RecurdynParameters.FrictionVelocityExpression.Value |
0.1 (millimeters part), 0.003937 (inches part) |
RecurdynParameters.GlobalMaxPenetrationExpression.Value |
10.0 (millimeters part), 0.3937 (inches part) |
RecurdynParameters.LocalMaxPenetrationExpression.Value |
0.0 |
RecurdynParameters.MaterialDampingExpression.Value |
10000.0 (millimeters part), 57.0993 (inches part) |
RecurdynParameters.MaximumStepSizeFactorExpression.Value |
10.0 |
RecurdynParameters.PenetrationDepthExpression.Value |
0.01 (millimeters part), 0.0003937 (inches part) |
RecurdynParameters.ReboundDampingFactorExpression.Value |
0.25 |
RecurdynParameters.ReboundDampingFactorFlag |
True |
RecurdynParameters.SecondGeometryBoundingBufferLengthExpression.Value |
20 (millimeters part), 0.7874 (inches part) |
RecurdynParameters.SecondGeometryMaxFacetSizeFactorExpression.Value |
2.0 |
RecurdynParameters.SecondGeometryMaxFacetSizeFactorFlag |
False |
RecurdynParameters.SecondGeometryMaximumPenetrationExpression.Value |
1.0 (millimeters part), 0.03937 (inches part) |
RecurdynParameters.SecondGeometryPlaneToleranceFactorExpression.Value |
5.0 |
RecurdynParameters.SecondGeometryPlaneToleranceFactorSolidContactExpression.Value |
3.0 |
RecurdynParameters.StaticCoefficientExpression.Value |
0.3 |
RecurdynParameters.StictionVelocityExpression.Value |
0.01 (millimeters part), 0.0003937 (inches part) |
RecurdynParameters.StiffnessExpression.Value |
100000000.0 (millimeters part), 570993.142 (inches part) |
RecurdynParameters.SurfaceTypeOption |
Faceted |
SphereToCadParameters.BodyAngleTolerance.Value |
25 |
SphereToCadParameters.BodyDistanceTolerance.Value |
0.0 (millimeters part), 0.0 (inches part) |
SphereToCadParameters.BodyEnableMaxFacetSize |
0 |
SphereToCadParameters.BodyMaxFacetSize.Value |
1000 (millimeters part), 39.370078740157 (inches part) |
SphereToCadParameters.CoulombFrictionOption |
Off |
SphereToCadParameters.DynamicCoefficient.Value |
0.2 |
SphereToCadParameters.ForceExponent.Value |
2.0 |
SphereToCadParameters.FrictionVelocity.Value |
0.1 (millimeters part), 0.003937 (inches part) |
SphereToCadParameters.MaterialDamping.Value |
10000.0 (millimeters part), 57.1014715473270000 (inches part) |
SphereToCadParameters.MaxPenetrationDepth.Value |
0.0254 (millimeters part), 0.001 (inches part) |
SphereToCadParameters.SphereMaxFacetSize.Value |
1000 (millimeters part), 39.370078740157 (inches part) |
SphereToCadParameters.SphereRadius.Value |
1000.0 (millimeters part), 39.370078740157 (inches part) |
SphereToCadParameters.StaticCoefficient.Value |
0.3 |
SphereToCadParameters.StictionVelocity.Value |
0.01 (millimeters part), 0.0003937 (inches part) |
SphereToCadParameters.Stiffness.Value |
100000000.0 (millimeters part), 571014.71547327 (inches part) |
SphereToCadParameters.SuperElementIncrement |
1 |
SphereToCadParameters.SuperElementReportInstance |
1 |
SphereToCadParameters.UseTessellationFile |
0 |
Created in NX5.0.0.
NXOpen::Motion::BodyContactAdams* NXOpen::Motion::BodyContactBuilder::AdamsParameters | ( | ) |
Returns the 3D BodyContact's subobject (the adams parameters)
Created in NX5.0.0.
License requirements : None
NXOpen::Motion::BodyContactBuilder::ContactTypeOption NXOpen::Motion::BodyContactBuilder::ContactType | ( | ) |
Returns the type: 3D contact or Sphere to CAD
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::SelectNXObjectList* NXOpen::Motion::BodyContactBuilder::FirstContactGeometry | ( | ) |
Returns the selection of the first contact geometry
Use Motion::BodyContactBuilder::FirstContactGeometryObject instead.
Created in NX5.0.0.
License requirements : None
NXOpen::SelectNXObject* NXOpen::Motion::BodyContactBuilder::FirstContactGeometryObject | ( | ) |
Returns the selection of the first contact geometry
Created in NX1847.0.0.
License requirements : None
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BodyContactBuilder::FirstContactGeometryObjectOvrCtrl | ( | ) |
Returns.
the override state of the action geometry
It should only be used for occurrences
Created in NX1847.0.0.
License requirements : None
NXOpen::Motion::BodyContactLms* NXOpen::Motion::BodyContactBuilder::LmsParameters | ( | ) |
Returns the 3D BodyContact's subobject (the lms parameters)
Created in NX10.0.0.
License requirements : None
NXString NXOpen::Motion::BodyContactBuilder::Name | ( | ) |
Returns the name
Created in NX6.0.0.
License requirements : None
NXOpen::Motion::BodyContactRecurdyn* NXOpen::Motion::BodyContactBuilder::RecurdynParameters | ( | ) |
Returns the 3D BodyContact's subobject (the recurdyn parameters)
Created in NX5.0.0.
License requirements : None
NXOpen::SelectNXObjectList* NXOpen::Motion::BodyContactBuilder::SecondContactGeometry | ( | ) |
Returns the selection of the second contact geometry
Use Motion::BodyContactBuilder::SecondContactGeometryObject instead.
Created in NX5.0.0.
License requirements : None
NXOpen::SelectNXObject* NXOpen::Motion::BodyContactBuilder::SecondContactGeometryObject | ( | ) |
Returns the selection of the second contact geometry
Created in NX1847.0.0.
License requirements : None
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BodyContactBuilder::SecondContactGeometryObjectOvrCtrl | ( | ) |
Returns.
the override state of the base geometry
It should only be used for occurrences
Created in NX1847.0.0.
License requirements : None
void NXOpen::Motion::BodyContactBuilder::SetContactType | ( | NXOpen::Motion::BodyContactBuilder::ContactTypeOption | type | ) |
Sets the type: 3D contact or Sphere to CAD
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
type | type |
void NXOpen::Motion::BodyContactBuilder::SetFirstContactGeometryObjectOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets.
the override state of the action geometry
It should only be used for occurrences
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BodyContactBuilder::SetName | ( | const NXString & | name | ) |
Sets the name
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
name | name |
void NXOpen::Motion::BodyContactBuilder::SetName | ( | const char * | name | ) |
Sets the name
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
name | name |
void NXOpen::Motion::BodyContactBuilder::SetSecondContactGeometryObjectOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets.
the override state of the base geometry
It should only be used for occurrences
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BodyContactBuilder::SetSphereCenter | ( | NXOpen::Point * | sphereCenter | ) |
Sets the selection of sphere center for Sphere To CAD
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
sphereCenter | spherecenter |
void NXOpen::Motion::BodyContactBuilder::SetSphereCenterOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets.
the override state of the sphere center
It should only be used for occurrences
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BodyContactBuilder::SetSphereLinkOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets.
the override state of the sphere motion body
It should only be used for occurrences
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
NXOpen::Point* NXOpen::Motion::BodyContactBuilder::SphereCenter | ( | ) |
Returns the selection of sphere center for Sphere To CAD
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BodyContactBuilder::SphereCenterOvrCtrl | ( | ) |
Returns.
the override state of the sphere center
It should only be used for occurrences
Created in NX1847.0.0.
License requirements : None
NXOpen::Motion::SelectLink* NXOpen::Motion::BodyContactBuilder::SphereLink | ( | ) |
Returns the selection of sphere motion body for Sphere To CAD
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BodyContactBuilder::SphereLinkOvrCtrl | ( | ) |
Returns.
the override state of the sphere motion body
It should only be used for occurrences
Created in NX1847.0.0.
License requirements : None
NXOpen::Motion::BodyContactSphereToCAD* NXOpen::Motion::BodyContactBuilder::SphereToCadParameters | ( | ) |
Returns the 3D BodyContact's subobject (the sphere to cad parameters)
Created in NX12.0.0.
License requirements : None