NXOpen C++ Reference Guide
|
Represents a Motion BushingDefine
Created in NX6.0.0.
More...
Public Types | |
enum | AngleCalculationOption { AngleCalculationOptionLargeAngle, AngleCalculationOptionSmallAngle } |
Defines the Angle Calculation option. More... | |
enum | ForceCalculationOption { ForceCalculationOptionAbc, ForceCalculationOptionStandard, ForceCalculationOptionBab } |
Defines the Force Calculation option. More... | |
enum | OrientationTypes { OrientationTypesVector, OrientationTypesCsys } |
Defines the orientation type of bushing. More... | |
Public Member Functions | |
NXOpen::Motion::SelectLink * | ActionLink () |
Returns the action motion body Created in NX6.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ActionLinkOvrCtrl () |
Returns the override state of the action rigid body Created in NX1847.0.0. More... | |
NXOpen::Expression * | ActionOffsetX () |
Returns the offset to be applied on X Axis, if Action Offset is used Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ActionOffsetXOvrCtrl () |
Returns the override state of the Action Offset X Created in NX1847.0.0. More... | |
NXOpen::Expression * | ActionOffsetY () |
Returns the offset to be applied on Y Axis, if Action Offset is used Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ActionOffsetYOvrCtrl () |
Returns the override state of the Action Offset Y Created in NX1847.0.0. More... | |
NXOpen::Expression * | ActionOffsetZ () |
Returns the offset to be applied on Z Axis, if Action Offset is used Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ActionOffsetZOvrCtrl () |
Returns the override state of the Action Offset Z Created in NX1847.0.0. More... | |
NXOpen::Point * | ActionPoint () |
Returns the action point Created in NX6.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ActionPointOvrCtrl () |
Returns the override state of the action point Created in NX1847.0.0. More... | |
NXOpen::Motion::BushingDefine::AngleCalculationOption | AngleCalculation () |
Returns the angle calculation option Created in NX12.0.0. More... | |
bool | ApplyActionOffset () |
Returns the flag to specify whether Action Offset should be applied Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ApplyActionOffsetOvrCtrl () |
Returns the override state of the apply action offset toggle Created in NX1847.0.0. More... | |
bool | ApplyBaseOffset () |
Returns the flag to specify whether Base Offset should be applied Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ApplyBaseOffsetOvrCtrl () |
Returns the override state of the apply base offset toggle Created in NX1847.0.0. More... | |
NXOpen::Expression * | BaseOffsetX () |
Returns the offset to be applied on X Axis, if Base Offset is used Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | BaseOffsetXOvrCtrl () |
Returns the override state of the Base Offset X Created in NX1847.0.0. More... | |
NXOpen::Expression * | BaseOffsetY () |
Returns the offset to be applied on Y Axis, if Base Offset is used Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | BaseOffsetYOvrCtrl () |
Returns the override state of the Base Offset Y Created in NX1847.0.0. More... | |
NXOpen::Expression * | BaseOffsetZ () |
Returns the offset to be applied on Z Axis, if Base Offset is used Created in NX12.0.0. More... | |
NXOpen::Motion::ParamOverrideState | BaseOffsetZOvrCtrl () |
Returns the override state of the Base Offset Z Created in NX1847.0.0. More... | |
NXOpen::CoordinateSystem * | Csys () |
Returns the csys of bushing, the coordinate system of action and reaction are same each other Created in NX6.0.0. More... | |
NXOpen::Motion::ParamOverrideState | CsysOvrCtrl () |
Returns the override state of the coordinate system Created in NX1847.0.0. More... | |
bool | Dipole () |
Returns the dipole option Created in NX12.0.0. More... | |
NXOpen::Direction * | Direction () |
Returns. More... | |
NXOpen::Motion::ParamOverrideState | DirectionOvrCtrl () |
Returns the override state of the direction Created in NX1847.0.0. More... | |
NXOpen::Motion::BushingDefine::ForceCalculationOption | ForceCalculation () |
Returns the force calculation option Created in NX12.0.0. More... | |
NXString | Name () |
Returns the name Created in NX6.0.0. More... | |
NXOpen::NXMatrix * | Orientation () |
Returns the matrix of bushing More... | |
NXOpen::Motion::BushingDefine::OrientationTypes | OrientationType () |
Returns the orientation type of bushing Created in NX8.0.0. More... | |
NXOpen::Motion::ParamOverrideState | OrientationTypeOvrCtrl () |
Returns the override state of the orientation type Created in NX1847.0.0. More... | |
NXOpen::Motion::SelectLink * | ReactionLink () |
Returns the reaction motion body Created in NX6.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ReactionLinkOvrCtrl () |
Returns the override state of the reaction rigid body Created in NX1847.0.0. More... | |
NXOpen::Point * | ReactionPoint () |
Returns the reaction point Created in NX6.0.0. More... | |
NXOpen::Motion::ParamOverrideState | ReactionPointOvrCtrl () |
Returns the override state of the reaction point Created in NX1847.0.0. More... | |
void | SetActionLinkOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the action rigid body Created in NX1847.0.0. More... | |
void | SetActionOffsetXOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the Action Offset X Created in NX1847.0.0. More... | |
void | SetActionOffsetYOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the Action Offset Y Created in NX1847.0.0. More... | |
void | SetActionOffsetZOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the Action Offset Z Created in NX1847.0.0. More... | |
void | SetActionPoint (NXOpen::Point *actionPoint) |
Sets the action point Created in NX6.0.0. More... | |
void | SetActionPointOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the action point Created in NX1847.0.0. More... | |
void | SetAngleCalculation (NXOpen::Motion::BushingDefine::AngleCalculationOption opt) |
Sets the angle calculation option Created in NX12.0.0. More... | |
void | SetApplyActionOffset (bool apply) |
Sets the flag to specify whether Action Offset should be applied Created in NX12.0.0. More... | |
void | SetApplyActionOffsetOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the apply action offset toggle Created in NX1847.0.0. More... | |
void | SetApplyBaseOffset (bool apply) |
Sets the flag to specify whether Base Offset should be applied Created in NX12.0.0. More... | |
void | SetApplyBaseOffsetOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the apply base offset toggle Created in NX1847.0.0. More... | |
void | SetBaseOffsetXOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the Base Offset X Created in NX1847.0.0. More... | |
void | SetBaseOffsetYOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the Base Offset Y Created in NX1847.0.0. More... | |
void | SetBaseOffsetZOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the Base Offset Z Created in NX1847.0.0. More... | |
void | SetCsys (NXOpen::CoordinateSystem *csys) |
Sets the csys of bushing, the coordinate system of action and reaction are same each other Created in NX6.0.0. More... | |
void | SetCsysOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the coordinate system Created in NX1847.0.0. More... | |
void | SetDipole (bool opt) |
Sets the dipole option Created in NX12.0.0. More... | |
void | SetDirection (NXOpen::Direction *direction) |
Sets. More... | |
void | SetDirectionOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the direction Created in NX1847.0.0. More... | |
void | SetForceCalculation (NXOpen::Motion::BushingDefine::ForceCalculationOption opt) |
Sets the force calculation option Created in NX12.0.0. More... | |
void | SetName (const NXString &name) |
Sets the name Created in NX6.0.0. More... | |
void | SetName (const char *name) |
Sets the name Created in NX6.0.0. More... | |
void | SetOrientation (NXOpen::NXMatrix *orientation) |
Sets the matrix of bushing More... | |
void | SetOrientationType (NXOpen::Motion::BushingDefine::OrientationTypes orientationType) |
Sets the orientation type of bushing Created in NX8.0.0. More... | |
void | SetOrientationTypeOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the orientation type Created in NX1847.0.0. More... | |
void | SetReactionLinkOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the reaction rigid body Created in NX1847.0.0. More... | |
void | SetReactionPoint (NXOpen::Point *reactionPoint) |
Sets the reaction point Created in NX6.0.0. More... | |
void | SetReactionPointOvrCtrl (NXOpen::Motion::ParamOverrideState overrideState) |
Sets the override state of the reaction point Created in NX1847.0.0. More... | |
virtual bool | Validate () |
Validate whether the inputs to the component are sufficient for commit to be called. More... | |
Public Member Functions inherited from NXOpen::TaggedObject | |
tag_t | Tag () const |
Returns the tag of this object. More... | |
Represents a Motion BushingDefine
Created in NX6.0.0.
NXOpen::Motion::SelectLink* NXOpen::Motion::BushingDefine::ActionLink | ( | ) |
Returns the action motion body
Created in NX6.0.0.
License requirements : None
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ActionLinkOvrCtrl | ( | ) |
Returns the override state of the action rigid body
Created in NX1847.0.0.
License requirements : None
NXOpen::Expression* NXOpen::Motion::BushingDefine::ActionOffsetX | ( | ) |
Returns the offset to be applied on X Axis, if Action Offset is used
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ActionOffsetXOvrCtrl | ( | ) |
Returns the override state of the Action Offset X
Created in NX1847.0.0.
License requirements : None
NXOpen::Expression* NXOpen::Motion::BushingDefine::ActionOffsetY | ( | ) |
Returns the offset to be applied on Y Axis, if Action Offset is used
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ActionOffsetYOvrCtrl | ( | ) |
Returns the override state of the Action Offset Y
Created in NX1847.0.0.
License requirements : None
NXOpen::Expression* NXOpen::Motion::BushingDefine::ActionOffsetZ | ( | ) |
Returns the offset to be applied on Z Axis, if Action Offset is used
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ActionOffsetZOvrCtrl | ( | ) |
Returns the override state of the Action Offset Z
Created in NX1847.0.0.
License requirements : None
NXOpen::Point* NXOpen::Motion::BushingDefine::ActionPoint | ( | ) |
Returns the action point
Created in NX6.0.0.
License requirements : None
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ActionPointOvrCtrl | ( | ) |
Returns the override state of the action point
Created in NX1847.0.0.
License requirements : None
NXOpen::Motion::BushingDefine::AngleCalculationOption NXOpen::Motion::BushingDefine::AngleCalculation | ( | ) |
Returns the angle calculation option
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
bool NXOpen::Motion::BushingDefine::ApplyActionOffset | ( | ) |
Returns the flag to specify whether Action Offset should be applied
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ApplyActionOffsetOvrCtrl | ( | ) |
Returns the override state of the apply action offset toggle
Created in NX1847.0.0.
License requirements : None
bool NXOpen::Motion::BushingDefine::ApplyBaseOffset | ( | ) |
Returns the flag to specify whether Base Offset should be applied
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ApplyBaseOffsetOvrCtrl | ( | ) |
Returns the override state of the apply base offset toggle
Created in NX1847.0.0.
License requirements : None
NXOpen::Expression* NXOpen::Motion::BushingDefine::BaseOffsetX | ( | ) |
Returns the offset to be applied on X Axis, if Base Offset is used
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::BaseOffsetXOvrCtrl | ( | ) |
Returns the override state of the Base Offset X
Created in NX1847.0.0.
License requirements : None
NXOpen::Expression* NXOpen::Motion::BushingDefine::BaseOffsetY | ( | ) |
Returns the offset to be applied on Y Axis, if Base Offset is used
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::BaseOffsetYOvrCtrl | ( | ) |
Returns the override state of the Base Offset Y
Created in NX1847.0.0.
License requirements : None
NXOpen::Expression* NXOpen::Motion::BushingDefine::BaseOffsetZ | ( | ) |
Returns the offset to be applied on Z Axis, if Base Offset is used
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::BaseOffsetZOvrCtrl | ( | ) |
Returns the override state of the Base Offset Z
Created in NX1847.0.0.
License requirements : None
NXOpen::CoordinateSystem* NXOpen::Motion::BushingDefine::Csys | ( | ) |
Returns the csys of bushing, the coordinate system of action and reaction are same each other
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::CsysOvrCtrl | ( | ) |
Returns the override state of the coordinate system
Created in NX1847.0.0.
License requirements : None
bool NXOpen::Motion::BushingDefine::Dipole | ( | ) |
Returns the dipole option
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Direction* NXOpen::Motion::BushingDefine::Direction | ( | ) |
Returns.
the direction
It should only be used when Bushing type is Motion::BushingBuilder::BushingTypesCylindrical
Created in NX6.0.0.
License requirements : None
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::DirectionOvrCtrl | ( | ) |
Returns the override state of the direction
Created in NX1847.0.0.
License requirements : None
NXOpen::Motion::BushingDefine::ForceCalculationOption NXOpen::Motion::BushingDefine::ForceCalculation | ( | ) |
Returns the force calculation option
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
NXString NXOpen::Motion::BushingDefine::Name | ( | ) |
Returns the name
Created in NX6.0.0.
License requirements : None
NXOpen::NXMatrix* NXOpen::Motion::BushingDefine::Orientation | ( | ) |
Returns the matrix of bushing
Use Motion::BushingDefine::Direction or Motion::BushingDefine::Csys instead.
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::BushingDefine::OrientationTypes NXOpen::Motion::BushingDefine::OrientationType | ( | ) |
Returns the orientation type of bushing
Created in NX8.0.0.
License requirements : mechanisms ("MECHANISMS")
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::OrientationTypeOvrCtrl | ( | ) |
Returns the override state of the orientation type
Created in NX1847.0.0.
License requirements : None
NXOpen::Motion::SelectLink* NXOpen::Motion::BushingDefine::ReactionLink | ( | ) |
Returns the reaction motion body
Created in NX6.0.0.
License requirements : None
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ReactionLinkOvrCtrl | ( | ) |
Returns the override state of the reaction rigid body
Created in NX1847.0.0.
License requirements : None
NXOpen::Point* NXOpen::Motion::BushingDefine::ReactionPoint | ( | ) |
Returns the reaction point
Created in NX6.0.0.
License requirements : None
NXOpen::Motion::ParamOverrideState NXOpen::Motion::BushingDefine::ReactionPointOvrCtrl | ( | ) |
Returns the override state of the reaction point
Created in NX1847.0.0.
License requirements : None
void NXOpen::Motion::BushingDefine::SetActionLinkOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the action rigid body
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetActionOffsetXOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the Action Offset X
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetActionOffsetYOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the Action Offset Y
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetActionOffsetZOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the Action Offset Z
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetActionPoint | ( | NXOpen::Point * | actionPoint | ) |
Sets the action point
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
actionPoint | actionpoint |
void NXOpen::Motion::BushingDefine::SetActionPointOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the action point
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetAngleCalculation | ( | NXOpen::Motion::BushingDefine::AngleCalculationOption | opt | ) |
Sets the angle calculation option
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
opt | opt |
void NXOpen::Motion::BushingDefine::SetApplyActionOffset | ( | bool | apply | ) |
Sets the flag to specify whether Action Offset should be applied
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
apply | apply |
void NXOpen::Motion::BushingDefine::SetApplyActionOffsetOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the apply action offset toggle
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetApplyBaseOffset | ( | bool | apply | ) |
Sets the flag to specify whether Base Offset should be applied
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
apply | apply |
void NXOpen::Motion::BushingDefine::SetApplyBaseOffsetOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the apply base offset toggle
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetBaseOffsetXOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the Base Offset X
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetBaseOffsetYOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the Base Offset Y
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetBaseOffsetZOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the Base Offset Z
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetCsys | ( | NXOpen::CoordinateSystem * | csys | ) |
Sets the csys of bushing, the coordinate system of action and reaction are same each other
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
csys | csys |
void NXOpen::Motion::BushingDefine::SetCsysOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the coordinate system
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetDipole | ( | bool | opt | ) |
Sets the dipole option
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
opt | opt |
void NXOpen::Motion::BushingDefine::SetDirection | ( | NXOpen::Direction * | direction | ) |
Sets.
the direction
It should only be used when Bushing type is Motion::BushingBuilder::BushingTypesCylindrical
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
direction | direction |
void NXOpen::Motion::BushingDefine::SetDirectionOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the direction
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetForceCalculation | ( | NXOpen::Motion::BushingDefine::ForceCalculationOption | opt | ) |
Sets the force calculation option
Created in NX12.0.0.
License requirements : mechanisms ("MECHANISMS")
opt | opt |
void NXOpen::Motion::BushingDefine::SetName | ( | const NXString & | name | ) |
Sets the name
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
name | name |
void NXOpen::Motion::BushingDefine::SetName | ( | const char * | name | ) |
Sets the name
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
name | name |
void NXOpen::Motion::BushingDefine::SetOrientation | ( | NXOpen::NXMatrix * | orientation | ) |
Sets the matrix of bushing
Use Motion::BushingDefine::Direction or Motion::BushingDefine::Csys instead.
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
orientation | orientation |
void NXOpen::Motion::BushingDefine::SetOrientationType | ( | NXOpen::Motion::BushingDefine::OrientationTypes | orientationType | ) |
Sets the orientation type of bushing
Created in NX8.0.0.
License requirements : mechanisms ("MECHANISMS")
orientationType | orientationtype |
void NXOpen::Motion::BushingDefine::SetOrientationTypeOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the orientation type
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetReactionLinkOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the reaction rigid body
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
void NXOpen::Motion::BushingDefine::SetReactionPoint | ( | NXOpen::Point * | reactionPoint | ) |
Sets the reaction point
Created in NX6.0.0.
License requirements : mechanisms ("MECHANISMS")
reactionPoint | reactionpoint |
void NXOpen::Motion::BushingDefine::SetReactionPointOvrCtrl | ( | NXOpen::Motion::ParamOverrideState | overrideState | ) |
Sets the override state of the reaction point
Created in NX1847.0.0.
License requirements : mechanisms ("MECHANISMS")
overrideState | overridestate |
|
virtual |
Validate whether the inputs to the component are sufficient for commit to be called.
If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven't set it. This method throws a not-yet-implemented NXException for some components.
Implements NXOpen::GeometricUtilities::IComponentBuilder.