NXOpen::LineDesigner::LineDesignerManager Class Reference

Represents a manager of line designer builders
Use the static method in this class to obtain an instance. More...

Public Member Functions
void	ConsolidateUndoMarks (NXOpen::Session::UndoMarkId undoMarkId)
	Consolidate Undo Marks Created in NX9.0.0. More...
NXOpen::LineDesigner::LineDesignerApplicationBuilder *	CreateApplicationBuilder (NXOpen::Part *part)
	Create the application builder. More...
NXOpen::LineDesigner::ColumnFeatureBuilder *	CreateColumnFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::ColumnFeature *columnFeature)
	Create column feature builder. More...
NXOpen::LineDesigner::ColumnFeatureBuilder *	CreateColumnFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::DBNode *node)
	Create column feature builder inside a node or using node. More...
NXOpen::LineDesigner::ColumnGridEquipmentBuilder *	CreateColumnGridEquipmentBuilder (NXOpen::Part *part, NXOpen::LineDesigner::DBColumnGridNode *dbnode)
	Create column grid equipment Builder. More...
NXOpen::LineDesigner::ConnectionCreatorBuilder *	CreateConnectionCreatorBuilder (NXOpen::Part *part)
	Create Connection Creator Builder. More...
NXOpen::LineDesigner::ConveyorStationFeatureBuilder *	CreateConveyorStationFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::ConveyorStationFeature *railingFeature)
	Create conveyor station feature builder. More...
NXOpen::LineDesigner::CoverFeatureBuilder *	CreateCoverFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::CoverFeature *coverFeature)
	Create CoverFeature builder. More...
NXOpen::LineDesigner::CreateFactoryElementBuilder *	CreateCreateFactoryElementBuilder (NXOpen::Part *part, NXOpen::LineDesigner::CreateFactoryElement *createFactoryElement)
	Create factory element builder. More...
NXOpen::LineDesigner::CreateFenceBuilder *	CreateCreateFenceBuilder (NXOpen::Part *part, NXOpen::LineDesigner::CreateFence *createFence)
	Create fence builder. More...
NXOpen::LineDesigner::CreateSystemBuilder *	CreateCreateSystemBuilder (NXOpen::Part *part, NXOpen::LineDesigner::CreateSystem *createSystem)
	Create system builder. More...
NXOpen::LineDesigner::DisconnectConnectionBuilder *	CreateDisconnectConnectionBuilder (NXOpen::Part *part)
	Create Disconnect Connection Builder. More...
NXOpen::LineDesigner::ExportPlantToDWGBuilder *	CreateExportPlantToDwgBuilder (NXOpen::Part *part, NXOpen::LineDesigner::ExportPlantToDWG *exportPlantToDwg)
	Create the export plant to DWG builder. More...
NXOpen::LineDesigner::ExportToDWGBuilder *	CreateExportToDwgBuilder (NXOpen::Part *part, NXOpen::LineDesigner::ExportToDWG *exportToDwg)
	Creates the export to DWG builder. More...
NXOpen::LineDesigner::FactoryCadGeoEquipmentBuilder *	CreateFactorycadgeoequipmentassemblyBuilder (NXOpen::Part *part)
	To create a rename factory cad geo equipment assembly builder. More...
NXOpen::LineDesigner::FactoryCadGeoEquipmentBuilder *	CreateFactorycadgeoequipmentBuilder (NXOpen::Part *part, NXOpen::LineDesigner::DBFactoryCadGeoNode *dbnode)
	To create a rename factory cad geo equipment builder. More...
NXOpen::LineDesigner::FloorEquipmentBuilder *	CreateFloorequipmentBuilder (NXOpen::Part *part, NXOpen::LineDesigner::DBFloorEquipmentNode *dbnode)
	Create Floor builder. More...
NXOpen::LineDesigner::GateFeatureBuilder *	CreateGateFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::GateFeature *coverFeature)
	Create GateFeature builder. More...
NXOpen::LineDesigner::GlobalSelectionBuilder *	CreateGlobalSelectionBuilder (NXOpen::Part *part)
	Create global selection builder. More...
NXOpen::LineDesigner::HoleFeatureBuilder *	CreateHoleFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::HoleFeature *holeFeature)
	Create HoleFeature builder. More...
NXOpen::LineDesigner::ImportFactoryCadGeoBuilder *	CreateImportFactoryCadGeoBuilder (NXOpen::Part *part)
	To get the import factory cad geo builder. More...
NXOpen::LineDesigner::InsertSheetBuilder *	CreateInsertSheetBuilder (NXOpen::Part *part, NXOpen::LineDesigner::InsertSheet *insertSheet)
	Creates the insert sheet builder. More...
NXOpen::LineDesigner::JigOnPlaneBuilder *	CreateJigOnPlaneBuilder (NXOpen::Part *part)
	Create the jig on plane builder. More...
NXOpen::LineDesigner::PickRectanglePointsBuilder *	CreatePickRectanglePointsBuilder (NXOpen::Part *part)
	Create pick rectangle points builder. More...
NXOpen::LineDesigner::PlanViewManager *	CreatePlanViewManagerInstance (NXOpen::Part *part)
	Creates the plan view manager instance. More...
NXOpen::LineDesigner::PlatformEquipmentBuilder *	CreatePlatformEquipmentBuilder (NXOpen::Part *part, NXOpen::LineDesigner::DBPlatformEquipmentNode *dbnode)
	Create Platform Equipment Builder. More...
NXOpen::LineDesigner::ProductionUnitCreatorBuilder *	CreateProductionUnitCreatorBuilder (NXOpen::Part *part)
	Create production unit creator builder. More...
NXOpen::LineDesigner::RailingFeatureBuilder *	CreateRailingFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::RailingFeature *railingFeature)
	Create railing feature builder. More...
NXOpen::LineDesigner::RailingFeatureBuilder *	CreateRailingFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::DBNode *node)
	Create railing feature builder. More...
NXOpen::LineDesigner::RailOpeningFeatureBuilder *	CreateRailOpeningFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::RailOpeningFeature *railingFeature)
	Create rail opening feature builder. More...
NXOpen::LineDesigner::RenameDialogeBuilder *	CreateRenameDialogeBuilder (NXOpen::Part *part)
	Creates a Rename Dialoge Builder. More...
NXOpen::LineDesigner::RenameItemRevisionBuilder *	CreateRenameItemRevisionBuilder (NXOpen::Part *part)
	To create a rename ItemRevision Builder. More...
NXOpen::LineDesigner::ResizeConnectorBuilder *	CreateResizeConnectorBuilder (NXOpen::Part *part)
	Create resize connector Builder. More...
NXOpen::LineDesigner::SingleElementConveyorBuilder *	CreateSingleElementConveyorBuilder (NXOpen::Part *part, NXOpen::LineDesigner::DBConveyorNode *node)
	Create single element conveyor builder. More...
NXOpen::LineDesigner::StairwayEquipmentBuilder *	CreateStairwayEquipmentBuilder (NXOpen::Part *part, NXOpen::LineDesigner::DBStairwayEquipmentNode *dbnode)
	Create StairwayEquipment builder. More...
NXOpen::LineDesigner::TypedConnectorFeatureBuilder *	CreateTypedConnectorFeatureBuilder (NXOpen::Part *part, NXOpen::LineDesigner::TypedConnectorFeature *typedConnectorFeature)
	Create typed connector feature builder. More...
NXOpen::Drawings::DrawingSheetBuilder *	DrawingSheetBuilder (NXOpen::Part *owningPart, NXOpen::Drawings::DrawingSheet *sheet)
	Create the drawing sheet builder. More...
NXOpen::LineDesigner::LineDesignerApplicationBuilder *	GetApplicationBuilder ()
	Application builder is return. More...
NXOpen::LineDesigner::FastPlacementUtilityBuilder *	GetFastPlacementUtilityBuilder (NXOpen::Part *part)
	Get the fast placement utility builder. More...
NXOpen::LineDesigner::ReuseLibraryUtilityBuilder *	GetReuseLibraryUtilityBuilder ()
	Returns the reuse library utility builder. More...
NXOpen::LineDesigner::PlantProductionUnitCreatorBuilder *	PlantCreateProductionUnitCreatorBuilder (NXOpen::Part *part)
	To create a new navigator production unit builder. More...
tag_t	Tag () const
	Returns the tag of this object. More...

Static Public Member Functions
static LineDesignerManager *	GetLineDesignerManager (NXOpen::Session *owner)
	Returns the LineDesignerManager object for the running session which serves as the 'gateway' class for the application API. More...

Detailed Description

Represents a manager of line designer builders
Use the static method in this class to obtain an instance.

Created in NX9.0.0.

Member Function Documentation

void NXOpen::LineDesigner::LineDesignerManager::ConsolidateUndoMarks

(

NXOpen::Session::UndoMarkId

undoMarkId

)

Consolidate Undo Marks
Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

undoMarkId

undomarkid

NXOpen::LineDesigner::LineDesignerApplicationBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateApplicationBuilder

(

NXOpen::Part *

part

)

Create the application builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::ColumnFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateColumnFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::ColumnFeature *	columnFeature
	)

Create column feature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
columnFeature	LineDesigner::ColumnFeature to be edited

NXOpen::LineDesigner::ColumnFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateColumnFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::DBNode *	node
	)

Create column feature builder inside a node or using node.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
node	node

NXOpen::LineDesigner::ColumnGridEquipmentBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateColumnGridEquipmentBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::DBColumnGridNode *	dbnode
	)

Create column grid equipment Builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
dbnode	dbnode

NXOpen::LineDesigner::ConnectionCreatorBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateConnectionCreatorBuilder

(

NXOpen::Part *

part

)

Create Connection Creator Builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::ConveyorStationFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateConveyorStationFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::ConveyorStationFeature *	railingFeature
	)

Create conveyor station feature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
railingFeature	LineDesigner::ConveyorStationFeature to be edited

NXOpen::LineDesigner::CoverFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateCoverFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::CoverFeature *	coverFeature
	)

Create CoverFeature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
coverFeature	LineDesigner::CoverFeature to be edited

NXOpen::LineDesigner::CreateFactoryElementBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateCreateFactoryElementBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::CreateFactoryElement *	createFactoryElement
	)

Create factory element builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
createFactoryElement	LineDesigner::CreateFactoryElement to be edited

NXOpen::LineDesigner::CreateFenceBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateCreateFenceBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::CreateFence *	createFence
	)

Create fence builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
createFence	LineDesigner::CreateFence to be edited

NXOpen::LineDesigner::CreateSystemBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateCreateSystemBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::CreateSystem *	createSystem
	)

Create system builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
createSystem	LineDesigner::CreateSystem to be edited

NXOpen::LineDesigner::DisconnectConnectionBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateDisconnectConnectionBuilder

(

NXOpen::Part *

part

)

Create Disconnect Connection Builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::ExportPlantToDWGBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateExportPlantToDwgBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::ExportPlantToDWG *	exportPlantToDwg
	)

Create the export plant to DWG builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
exportPlantToDwg	LineDesigner::ExportPlantToDWG to be edited

NXOpen::LineDesigner::ExportToDWGBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateExportToDwgBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::ExportToDWG *	exportToDwg
	)

Creates the export to DWG builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
exportToDwg	LineDesigner::ExportToDWG to be edited

NXOpen::LineDesigner::FactoryCadGeoEquipmentBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateFactorycadgeoequipmentassemblyBuilder

(

NXOpen::Part *

part

)

To create a rename factory cad geo equipment assembly builder.

Returns

Created in NX11.0.1.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::FactoryCadGeoEquipmentBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateFactorycadgeoequipmentBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::DBFactoryCadGeoNode *	dbnode
	)

To create a rename factory cad geo equipment builder.

Returns

Created in NX11.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
dbnode	dbnode

NXOpen::LineDesigner::FloorEquipmentBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateFloorequipmentBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::DBFloorEquipmentNode *	dbnode
	)

Create Floor builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
dbnode	dbnode

NXOpen::LineDesigner::GateFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateGateFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::GateFeature *	coverFeature
	)

Create GateFeature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
coverFeature	LineDesigner::GateFeature to be edited

NXOpen::LineDesigner::GlobalSelectionBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateGlobalSelectionBuilder

(

NXOpen::Part *

part

)

Create global selection builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::HoleFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateHoleFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::HoleFeature *	holeFeature
	)

Create HoleFeature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
holeFeature	LineDesigner::HoleFeature to be edited

NXOpen::LineDesigner::ImportFactoryCadGeoBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateImportFactoryCadGeoBuilder

(

NXOpen::Part *

part

)

To get the import factory cad geo builder.

Returns

Created in NX11.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::InsertSheetBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateInsertSheetBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::InsertSheet *	insertSheet
	)

Creates the insert sheet builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
insertSheet	LineDesigner::InsertSheet to be edited

NXOpen::LineDesigner::JigOnPlaneBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateJigOnPlaneBuilder

(

NXOpen::Part *

part

)

Create the jig on plane builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::PickRectanglePointsBuilder* NXOpen::LineDesigner::LineDesignerManager::CreatePickRectanglePointsBuilder

(

NXOpen::Part *

part

)

Create pick rectangle points builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::PlanViewManager* NXOpen::LineDesigner::LineDesignerManager::CreatePlanViewManagerInstance

(

NXOpen::Part *

part

)

Creates the plan view manager instance.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::PlatformEquipmentBuilder* NXOpen::LineDesigner::LineDesignerManager::CreatePlatformEquipmentBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::DBPlatformEquipmentNode *	dbnode
	)

Create Platform Equipment Builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
dbnode	dbnode

NXOpen::LineDesigner::ProductionUnitCreatorBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateProductionUnitCreatorBuilder

(

NXOpen::Part *

part

)

Create production unit creator builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::RailingFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateRailingFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::RailingFeature *	railingFeature
	)

Create railing feature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
railingFeature	LineDesigner::RailingFeature to be edited

NXOpen::LineDesigner::RailingFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateRailingFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::DBNode *	node
	)

Create railing feature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
node	node

NXOpen::LineDesigner::RailOpeningFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateRailOpeningFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::RailOpeningFeature *	railingFeature
	)

Create rail opening feature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
railingFeature	LineDesigner::RailOpeningFeature to be edited

NXOpen::LineDesigner::RenameDialogeBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateRenameDialogeBuilder

(

NXOpen::Part *

part

)

Creates a Rename Dialoge Builder.

Returns

Created in NX11.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::RenameItemRevisionBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateRenameItemRevisionBuilder

(

NXOpen::Part *

part

)

To create a rename ItemRevision Builder.

Returns

Created in NX10.0.3.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::ResizeConnectorBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateResizeConnectorBuilder

(

NXOpen::Part *

part

)

Create resize connector Builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

NXOpen::LineDesigner::SingleElementConveyorBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateSingleElementConveyorBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::DBConveyorNode *	node
	)

Create single element conveyor builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
node	node

NXOpen::LineDesigner::StairwayEquipmentBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateStairwayEquipmentBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::DBStairwayEquipmentNode *	dbnode
	)

Create StairwayEquipment builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
dbnode	dbnode

NXOpen::LineDesigner::TypedConnectorFeatureBuilder* NXOpen::LineDesigner::LineDesignerManager::CreateTypedConnectorFeatureBuilder	(	NXOpen::Part *	part,
		NXOpen::LineDesigner::TypedConnectorFeature *	typedConnectorFeature
	)

Create typed connector feature builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part	part
typedConnectorFeature	LineDesigner::TypedConnectorFeature to be edited

NXOpen::Drawings::DrawingSheetBuilder* NXOpen::LineDesigner::LineDesignerManager::DrawingSheetBuilder	(	NXOpen::Part *	owningPart,
		NXOpen::Drawings::DrawingSheet *	sheet
	)

Create the drawing sheet builder.

Returns

the drawing sheet Builder with this identifier
Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

owningPart	owning part
sheet	the drawing sheet

NXOpen::LineDesigner::LineDesignerApplicationBuilder* NXOpen::LineDesigner::LineDesignerManager::GetApplicationBuilder

(

)

Application builder is return.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

NXOpen::LineDesigner::FastPlacementUtilityBuilder* NXOpen::LineDesigner::LineDesignerManager::GetFastPlacementUtilityBuilder

(

NXOpen::Part *

part

)

Get the fast placement utility builder.

Returns

Created in NX10.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

static LineDesignerManager* NXOpen::LineDesigner::LineDesignerManager::GetLineDesignerManager ( NXOpen::Session *  owner )

static

Returns the LineDesignerManager object for the running session which serves as the 'gateway' class for the application API.

References to all other objects in this API are obtained either directly or indirectly via methods and properties on this class. Platform Session should be initialized using 'GetSession' method from NXOpen API prior to this call.

NXOpen::LineDesigner::ReuseLibraryUtilityBuilder* NXOpen::LineDesigner::LineDesignerManager::GetReuseLibraryUtilityBuilder

(

)

Returns the reuse library utility builder.

Returns

Created in NX9.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

NXOpen::LineDesigner::PlantProductionUnitCreatorBuilder* NXOpen::LineDesigner::LineDesignerManager::PlantCreateProductionUnitCreatorBuilder

(

NXOpen::Part *

part

)

To create a new navigator production unit builder.

Returns

Created in NX12.0.0.

License requirements : ld_line_designer ("FULL LINE DESIGNER")

Parameters

part

part

tag_t NXOpen::LineDesigner::LineDesignerManager::Tag

(

)

const

Returns the tag of this object.

---

The documentation for this class was generated from the following file:

• LineDesigner_LineDesignerManager.hxx