|
NX Open C++ Reference Guide
|
Provides method for creating builder for node element operation commands in a fem part. More...
Provides method for creating builder for node element operation commands in a fem part.
To obtain an instance of this class, refer to NXOpen::CAE::BaseFEModel
Created in NX5.0.0.
| NXOpen::CAE::AttachElementsBuilder* NXOpen::CAE::NodeElementManager::CreateAttachElementsBuilder | ( | ) |
Creates a builder for attach elements command.
| NXOpen::CAE::AutomaticMorphBuilder* NXOpen::CAE::NodeElementManager::CreateAutomaticMorphBuilder | ( | ) |
Creates a builder for Automatic Morphing command.
| NXOpen::CAE::BeamEADBuilder* NXOpen::CAE::NodeElementManager::CreateBeamEadBuilder | ( | ) |
Creates a builder for the Beam EAD block.
| NXOpen::CAE::BeamEADBuilder* NXOpen::CAE::NodeElementManager::CreateBeamEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the Beam EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::BushingEADBuilder* NXOpen::CAE::NodeElementManager::CreateBushingEadBuilder | ( | ) |
Creates a builder for the Bushing EAD block.
| NXOpen::CAE::BushingEADBuilder* NXOpen::CAE::NodeElementManager::CreateBushingEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the Bushing EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::CombineTrisBuilder* NXOpen::CAE::NodeElementManager::CreateCombineTrisBuilder | ( | ) |
Creates a builder for Combine Tris.
| NXOpen::CAE::ConvexMeshBuilder* NXOpen::CAE::NodeElementManager::CreateConvexMeshBuilder | ( | NXOpen::CAE::RecipeConvexMesh * | mesh | ) |
Creates a NXOpen::CAE::ConvexMeshBuilder.
| mesh | Convex Mesh entity to be edited. |
| NXOpen::CAE::ConvexMeshBuilder* NXOpen::CAE::NodeElementManager::CreateConvexMeshBuilder | ( | ) |
Creates a NXOpen::CAE::ConvexMeshBuilder.
Created in NX11.0.0.
License requirements : sc_acou_meshing (" SC Acoustic Meshing")
| NXOpen::CAE::DamperEADBuilder* NXOpen::CAE::NodeElementManager::CreateDamperEadBuilder | ( | ) |
Creates a builder for the Damper EAD block.
| NXOpen::CAE::DamperEADBuilder* NXOpen::CAE::NodeElementManager::CreateDamperEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the Damper EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::ElementDeleteBuilder* NXOpen::CAE::NodeElementManager::CreateDeleteElementBuilder | ( | ) |
Creates a builder for element delete command.
| NXOpen::CAE::DestinationCollectorBuilder* NXOpen::CAE::NodeElementManager::CreateDestinationCollectorBuilder | ( | bool | isInEdit, |
| NXOpen::CAE::ElementTypeBuilder * | elementTypeBuilder | ||
| ) |
Creates a builder for the Destination Collector Specification block.
| isInEdit | the parent builder is editng an existing mesh/element collection. |
| elementTypeBuilder | the element type specification block |
| NXOpen::CAE::ElementConnectivityBuilder* NXOpen::CAE::NodeElementManager::CreateElementConnectivityBuilder | ( | ) |
Creates a builder for element connectivity command.
| NXOpen::CAE::ElementCreateBuilder* NXOpen::CAE::NodeElementManager::CreateElementCreateBuilder | ( | ) |
Creates a builder for element create command.
| NXOpen::CAE::ElementDetachBuilder* NXOpen::CAE::NodeElementManager::CreateElementDetachBuilder | ( | ) |
Creates a builder for element detach command.
| NXOpen::CAE::ElementExtractBuilder* NXOpen::CAE::NodeElementManager::CreateElementExtractBuilder | ( | ) |
Creates a builder for Element Extract.
| NXOpen::CAE::ElementExtrudeBuilder* NXOpen::CAE::NodeElementManager::CreateElementExtrudeBuilder | ( | ) |
Creates a builder for element extrude command.
| NXOpen::CAE::ElementModifyLabelBuilder* NXOpen::CAE::NodeElementManager::CreateElementModifyLabelBuilder | ( | ) |
Creates a builder for element modify label command.
| NXOpen::CAE::ElementModifyOrderBuilder* NXOpen::CAE::NodeElementManager::CreateElementModifyOrderBuilder | ( | ) |
Creates a builder for element modify order command.
| NXOpen::CAE::ElementModifyTypeBuilder* NXOpen::CAE::NodeElementManager::CreateElementModifyTypeBuilder | ( | ) |
Creates a builder for element modify type command.
| NXOpen::CAE::ElementProjectBuilder* NXOpen::CAE::NodeElementManager::CreateElementProjectBuilder | ( | ) |
Creates a builder for element project command.
| NXOpen::CAE::ElementReflectBuilder* NXOpen::CAE::NodeElementManager::CreateElementReflectBuilder | ( | ) |
Creates a builder for element reflect command.
| NXOpen::CAE::ElementRevolveBuilder* NXOpen::CAE::NodeElementManager::CreateElementRevolveBuilder | ( | ) |
Creates a builder for element revolve command.
| NXOpen::CAE::ElementRotateBuilder* NXOpen::CAE::NodeElementManager::CreateElementRotateBuilder | ( | ) |
Creates a builder for element translate command.
| NXOpen::CAE::ElementSplitBuilder* NXOpen::CAE::NodeElementManager::CreateElementSplitBuilder | ( | ) |
Creates a builder for element split command.
| NXOpen::CAE::ElementTranslateBuilder* NXOpen::CAE::NodeElementManager::CreateElementTranslateBuilder | ( | ) |
Creates a builder for element translate command.
| NXOpen::CAE::ElementTypeBuilder* NXOpen::CAE::NodeElementManager::CreateElementTypeBuilder | ( | ) |
Creates a builder for the Element Type Specification block.
| NXOpen::CAE::GapEADBuilder* NXOpen::CAE::NodeElementManager::CreateGapEadBuilder | ( | ) |
Creates a builder for the Gap EAD block.
| NXOpen::CAE::GapEADBuilder* NXOpen::CAE::NodeElementManager::CreateGapEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the Gap EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::InterpolationEADBuilder* NXOpen::CAE::NodeElementManager::CreateInterpolationEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the Interpolation EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::LumpedMassEADBuilder* NXOpen::CAE::NodeElementManager::CreateLumpedMassEadBuilder | ( | ) |
Creates a builder for the Lumped Mass EAD block.
| NXOpen::CAE::LumpedMassEADBuilder* NXOpen::CAE::NodeElementManager::CreateLumpedMassEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the LumpedMass EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::ManualMorphBuilder* NXOpen::CAE::NodeElementManager::CreateManualMorphBuilder | ( | ) |
Creates a builder for Manual Morphing command.
| NXOpen::CAE::ManualNodeAssociationBuilder* NXOpen::CAE::NodeElementManager::CreateManualNodeAssociationBuilder | ( | ) |
Creates a builder for manual node association command.
| NXOpen::CAE::MeshFromBoundaryBuilder* NXOpen::CAE::NodeElementManager::CreateMeshFromBoundaryBuilder | ( | ) |
Creates Mesh From Boundary builder.
| NXOpen::CAE::MorphRevolvedMeshBuilder* NXOpen::CAE::NodeElementManager::CreateMorphRevolvedMeshBuilder | ( | ) |
Creates a NXOpen::CAE::MorphRevolvedMeshBuilder.
| NXOpen::CAE::MoveNodeBuilder* NXOpen::CAE::NodeElementManager::CreateMoveNodeBuilder | ( | ) |
Creates a builder for move node command.
| NXOpen::CAE::MultipleElementCreateBuilder* NXOpen::CAE::NodeElementManager::CreateMultipleElementCreateBuilder | ( | int | estimatedNumberOfElements | ) |
Creates a builder for the creation of multiple elements.
| estimatedNumberOfElements | the estimated number of elements that will be created. It need not be exact. |
| NXOpen::CAE::MultipleNodeCreateBuilder* NXOpen::CAE::NodeElementManager::CreateMultipleNodeCreateBuilder | ( | int | estimatedNumberOfNodes | ) |
Creates a builder for the creation of multiple nodes.
| estimatedNumberOfNodes | the Estimated number of nodes that will be created. It need not be exact. |
| NXOpen::CAE::NodeAlignBuilder* NXOpen::CAE::NodeElementManager::CreateNodeAlignBuilder | ( | ) |
Creates a builder for node align command.
| NXOpen::CAE::NodeAssociationBuilder* NXOpen::CAE::NodeElementManager::CreateNodeAssociationBuilder | ( | ) |
Creates a builder for node association command.
| NXOpen::CAE::NodeCreateBuilder* NXOpen::CAE::NodeElementManager::CreateNodeCreateBuilder | ( | ) |
Creates a builder for node create command.
| NXOpen::CAE::NodeDeleteBuilder* NXOpen::CAE::NodeElementManager::CreateNodeDeleteBuilder | ( | ) |
Creates a builder for node delete command.
| NXOpen::CAE::NodeDissociationBuilder* NXOpen::CAE::NodeElementManager::CreateNodeDissociationBuilder | ( | ) |
Creates a builder for node dissociation command.
| NXOpen::CAE::NodeModifyLabelBuilder* NXOpen::CAE::NodeElementManager::CreateNodeModifyLabelBuilder | ( | ) |
Creates a builder for node modify label command.
| NXOpen::CAE::NodeModifyLocationBuilder* NXOpen::CAE::NodeElementManager::CreateNodeModifyLocationBuilder | ( | ) |
Creates a builder for node modify location command.
| NXOpen::CAE::NodeProjectBuilder* NXOpen::CAE::NodeElementManager::CreateNodeProjectBuilder | ( | ) |
Creates a builder for node project command.
| NXOpen::CAE::NodeReflectBuilder* NXOpen::CAE::NodeElementManager::CreateNodeReflectBuilder | ( | ) |
Creates a builder for Node reflect command.
| NXOpen::CAE::NodeRotateBuilder* NXOpen::CAE::NodeElementManager::CreateNodeRotateBuilder | ( | ) |
Creates a builder for node rotate command.
| NXOpen::CAE::NodesBetweenNodesBuilder* NXOpen::CAE::NodeElementManager::CreateNodesBetweenNodesBuilder | ( | ) |
Creates a builder for node between nodes command.
| NXOpen::CAE::NodesOnCurveBuilder* NXOpen::CAE::NodeElementManager::CreateNodesOnCurveBuilder | ( | ) |
Creates a builder for nodes on curve command.
| NXOpen::CAE::NodesRepositionBuilder* NXOpen::CAE::NodeElementManager::CreateNodesRepositionBuilder | ( | ) |
Creates a builder for repositioning nodes, Use this command when you need to modify many nodes at one time.
| NXOpen::CAE::NodeTranslateBuilder* NXOpen::CAE::NodeElementManager::CreateNodeTranslateBuilder | ( | ) |
Creates a builder for node translate command.
| NXOpen::CAE::OneDimensionalElementSplitBuilder* NXOpen::CAE::NodeElementManager::CreateOneDimensionalElementSplitBuilder | ( | ) |
Creates a builder for one dimensional element split command.
| NXOpen::CAE::OpenDuctMeshBuilder* NXOpen::CAE::NodeElementManager::CreateOpenDuctMeshBuilder | ( | NXOpen::CAE::RecipeOpenDuctMesh * | mesh | ) |
Creates a NXOpen::CAE::OpenDuctMeshBuilder.
| mesh | Open Duct Mesh entity to be edited. |
| NXOpen::CAE::RemoveRibsBuilder* NXOpen::CAE::NodeElementManager::CreateRemoveRibsBuilder | ( | ) |
Creates a builder for remove ribs command.
| NXOpen::CAE::RigidEADBuilder* NXOpen::CAE::NodeElementManager::CreateRigidEadBuilder | ( | ) |
Creates a builder for the Rigid EAD block.
| NXOpen::CAE::RigidEADBuilder* NXOpen::CAE::NodeElementManager::CreateRigidEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the Rigid EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::ShellEADBuilder* NXOpen::CAE::NodeElementManager::CreateShellEadBuilder | ( | ) |
Creates a builder for the Shell EAD block.
| NXOpen::CAE::ShellEADBuilder* NXOpen::CAE::NodeElementManager::CreateShellEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the Shell EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::SpiderElementBuilder* NXOpen::CAE::NodeElementManager::CreateSpiderElementBuilder | ( | ) |
Creates a builder for spider element command.
| NXOpen::CAE::SpringEADBuilder* NXOpen::CAE::NodeElementManager::CreateSpringEadBuilder | ( | ) |
Creates a builder for the Spring EAD block.
| NXOpen::CAE::SpringEADBuilder* NXOpen::CAE::NodeElementManager::CreateSpringEadBuilder | ( | NXOpen::CAE::FEElement * | element | ) |
Creates a builder for the Spring EAD block and initializes it with the input element if defined.
| element | element to be edited, if NULL then create a new one |
| NXOpen::CAE::SurfaceCoatBuilder* NXOpen::CAE::NodeElementManager::CreateSurfaceCoatBuilder | ( | ) |
Creates a builder for the Surface Coat.
| NXOpen::CAE::MoveNodeBuilder* NXOpen::CAE::NodeElementManager::CreateSwapDiagonalBuilder | ( | ) |
Creates a builder for swap diagonal command.
| NXOpen::CAE::SweepBetweenMeshBuilder* NXOpen::CAE::NodeElementManager::CreateSweepBetweenMeshBuilder | ( | ) |
Creates a builder for Manual Hex Mesh.
| NXOpen::CAE::ThickenMeshBuilder* NXOpen::CAE::NodeElementManager::CreateThickenMeshBuilder | ( | ) |
Creates a NXOpen::CAE::ThickenMeshBuilder.
| NXOpen::CAE::ElementAssociatedDataUtils* NXOpen::CAE::NodeElementManager::ElemAssociatedDataUtils | ( | ) |
Returns the element associated data access utility
Created in NX12.0.0.
| NXOpen::CAE::ElementInfoUtils* NXOpen::CAE::NodeElementManager::ElemInfoUtils | ( | ) |
Returns the element information utility
Created in NX11.0.0.
| tag_t NXOpen::CAE::NodeElementManager::Tag | ( | ) | const |
Returns the tag of this object.