LineDesignerManager Class¶

class NXOpen.LineDesigner.LineDesignerManager¶

Bases: object

Represents a manager of line designer builders

Use the static method in this class to obtain an instance.

New in version NX9.0.0.

Methods¶

Method	Description
ConsolidateUndoMarks	Consolidate Undo Marks
CreateApplicationBuilder	Creates the application builder @return
CreateColumnFeatureBuilder	Creates the column feature builder @return
CreateColumnGridEquipmentBuilder	Creates a Column Grid Equipment Builder @return
CreateConnectionCreatorBuilder	Creates a Connection Creator Builder @return
CreateConveyorStationFeatureBuilder	Creates the conveyor station feature builder @return
CreateCoverFeatureBuilder	Creates the CoverFeature builder @return
CreateCreateFactoryElementBuilder	Creates the create factory element builder @return
CreateCreateFenceBuilder	Creates the create fence builder @return
CreateCreateSystemBuilder	Creates the create system builder @return
CreateDisconnectConnectionBuilder	Creates a Disconnect Connection Builder @return
CreateExportPlantToDwgBuilder	Creates the export plant to DWG builder @return
CreateExportToDwgBuilder	Creates the export to DWG builder @return
CreateFloorequipmentBuilder	Creates the Floor builder @return
CreateGateFeatureBuilder	Creates the GateFeature builder @return
CreateGlobalSelectionBuilder	Creates the global selection builder @return
CreateHoleFeatureBuilder	Creates the HoleFeature builder @return
CreateImportFactoryCadGeoBuilder	Get the import factory cad geo builder @return
CreateInsertSheetBuilder	Creates the insert sheet builder @return
CreateJigOnPlaneBuilder	Creates the jig on plane builder @return
CreateLdAutotestPrefsBuilder	Creates a `LDAutotestPrefsBuilder` @return
CreatePickRectanglePointsBuilder	Creates the pick rectangle points builder @return
CreatePlanViewManagerInstance	Creates the plan view manager instance @return
CreatePlatformEquipmentBuilder	Creates a Platform Equipment Builder @return
CreateProductionUnitCreatorBuilder	Creates the production unit creator builder @return
CreateRailOpeningFeatureBuilder	Creates the rail opening feature builder @return
CreateRailingFeatureBuilder	Creates the railing feature builder @return
CreateRenameItemRevisionBuilder	Creates a Rename ItemRevision Builder @return
CreateResizeConnectorBuilder	Creates a resize connector Builder @return
CreateSingleElementConveyorBuilder	Creates a single element conveyor builder @return
CreateStairwayEquipmentBuilder	Creates the StairwayEquipment builder @return
CreateTypedConnectorFeatureBuilder	Creates the typed connector feature builder @return
DrawingSheetBuilder	Creates the drawing sheet builder @return the drawing sheet Builder with this identifier
GetApplicationBuilder	Return the application builder @return
GetFastPlacementUtilityBuilder	Get the fast placement utility builder @return
GetReuseLibraryUtilityBuilder	Returns the reuse library utility builder @return

Method Detail¶

ConsolidateUndoMarks¶

LineDesignerManager.ConsolidateUndoMarks¶

Consolidate Undo Marks

Signature ConsolidateUndoMarks(undoMarkId)

Parameters:	undoMarkId (int) –

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateApplicationBuilder¶

LineDesignerManager.CreateApplicationBuilder¶

Creates the application builder

Signature CreateApplicationBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.LineDesignerApplicationBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateColumnFeatureBuilder¶

LineDesignerManager.CreateColumnFeatureBuilder¶

Overloaded method CreateColumnFeatureBuilder

CreateColumnFeatureBuilder(part, columnFeature)
CreateColumnFeatureBuilder(part, node)

-------------------------------------

Creates the column feature builder

Signature CreateColumnFeatureBuilder(part, columnFeature)

Parameters:	part (`NXOpen.Part`) – columnFeature (`NXOpen.LineDesigner.ColumnFeature`) – `LineDesigner.ColumnFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.ColumnFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Creates the Column feature builder inside a node or using node

Signature CreateColumnFeatureBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.LineDesigner.DBNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.ColumnFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

CreateColumnGridEquipmentBuilder¶

LineDesignerManager.CreateColumnGridEquipmentBuilder¶

Creates a Column Grid Equipment Builder

Signature CreateColumnGridEquipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBColumnGridNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.ColumnGridEquipmentBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateConnectionCreatorBuilder¶

LineDesignerManager.CreateConnectionCreatorBuilder¶

Creates a Connection Creator Builder

Signature CreateConnectionCreatorBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.ConnectionCreatorBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateConveyorStationFeatureBuilder¶

LineDesignerManager.CreateConveyorStationFeatureBuilder¶

Creates the conveyor station feature builder

Signature CreateConveyorStationFeatureBuilder(part, railingFeature)

Parameters:	part (`NXOpen.Part`) – railingFeature (`NXOpen.LineDesigner.ConveyorStationFeature`) – `LineDesigner.ConveyorStationFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.ConveyorStationFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateCoverFeatureBuilder¶

LineDesignerManager.CreateCoverFeatureBuilder¶

Creates the CoverFeature builder

Signature CreateCoverFeatureBuilder(part, coverFeature)

Parameters:	part (`NXOpen.Part`) – coverFeature (`NXOpen.LineDesigner.CoverFeature`) – `LineDesigner.CoverFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.CoverFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateCreateFactoryElementBuilder¶

LineDesignerManager.CreateCreateFactoryElementBuilder¶

Creates the create factory element builder

Signature CreateCreateFactoryElementBuilder(part, createFactoryElement)

Parameters:	part (`NXOpen.Part`) – createFactoryElement (`NXOpen.LineDesigner.CreateFactoryElement`) – `LineDesigner.CreateFactoryElement` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.CreateFactoryElementBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateCreateFenceBuilder¶

LineDesignerManager.CreateCreateFenceBuilder¶

Creates the create fence builder

Signature CreateCreateFenceBuilder(part, createFence)

Parameters:	part (`NXOpen.Part`) – createFence (`NXOpen.LineDesigner.CreateFence`) – `LineDesigner.CreateFence` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.CreateFenceBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateCreateSystemBuilder¶

LineDesignerManager.CreateCreateSystemBuilder¶

Creates the create system builder

Signature CreateCreateSystemBuilder(part, createSystem)

Parameters:	part (`NXOpen.Part`) – createSystem (`NXOpen.LineDesigner.CreateSystem`) – `LineDesigner.CreateSystem` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.CreateSystemBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateDisconnectConnectionBuilder¶

LineDesignerManager.CreateDisconnectConnectionBuilder¶

Creates a Disconnect Connection Builder

Signature CreateDisconnectConnectionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.DisconnectConnectionBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateExportPlantToDwgBuilder¶

LineDesignerManager.CreateExportPlantToDwgBuilder¶

Creates the export plant to DWG builder

Signature CreateExportPlantToDwgBuilder(part, exportPlantToDwg)

Parameters:	part (`NXOpen.Part`) – exportPlantToDwg (`NXOpen.LineDesigner.ExportPlantToDWG`) – `LineDesigner.ExportPlantToDWG` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.ExportPlantToDWGBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateExportToDwgBuilder¶

LineDesignerManager.CreateExportToDwgBuilder¶

Creates the export to DWG builder

Signature CreateExportToDwgBuilder(part, exportToDwg)

Parameters:	part (`NXOpen.Part`) – exportToDwg (`NXOpen.LineDesigner.ExportToDWG`) – `LineDesigner.ExportToDWG` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.ExportToDWGBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateFloorequipmentBuilder¶

LineDesignerManager.CreateFloorequipmentBuilder¶

Creates the Floor builder

Signature CreateFloorequipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBFloorEquipmentNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.FloorEquipmentBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateGateFeatureBuilder¶

LineDesignerManager.CreateGateFeatureBuilder¶

Creates the GateFeature builder

Signature CreateGateFeatureBuilder(part, coverFeature)

Parameters:	part (`NXOpen.Part`) – coverFeature (`NXOpen.LineDesigner.GateFeature`) – `LineDesigner.GateFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.GateFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateGlobalSelectionBuilder¶

LineDesignerManager.CreateGlobalSelectionBuilder¶

Creates the global selection builder

Signature CreateGlobalSelectionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.GlobalSelectionBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateHoleFeatureBuilder¶

LineDesignerManager.CreateHoleFeatureBuilder¶

Creates the HoleFeature builder

Signature CreateHoleFeatureBuilder(part, holeFeature)

Parameters:	part (`NXOpen.Part`) – holeFeature (`NXOpen.LineDesigner.HoleFeature`) – `LineDesigner.HoleFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.HoleFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateImportFactoryCadGeoBuilder¶

LineDesignerManager.CreateImportFactoryCadGeoBuilder¶

Get the import factory cad geo builder

Signature CreateImportFactoryCadGeoBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.ImportFactoryCadGeoBuilder`

New in version NX11.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateInsertSheetBuilder¶

LineDesignerManager.CreateInsertSheetBuilder¶

Creates the insert sheet builder

Signature CreateInsertSheetBuilder(part, insertSheet)

Parameters:	part (`NXOpen.Part`) – insertSheet (`NXOpen.LineDesigner.InsertSheet`) – `LineDesigner.InsertSheet` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.InsertSheetBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateJigOnPlaneBuilder¶

LineDesignerManager.CreateJigOnPlaneBuilder¶

Creates the jig on plane builder

Signature CreateJigOnPlaneBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.JigOnPlaneBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateLdAutotestPrefsBuilder¶

LineDesignerManager.CreateLdAutotestPrefsBuilder¶

Creates a LDAutotestPrefsBuilder

Signature CreateLdAutotestPrefsBuilder()

Returns:
Return type:	`NXOpen.LineDesigner.LDAutotestPrefsBuilder`

New in version NX10.0.0.

License requirements: None.

CreatePickRectanglePointsBuilder¶

LineDesignerManager.CreatePickRectanglePointsBuilder¶

Creates the pick rectangle points builder

Signature CreatePickRectanglePointsBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.PickRectanglePointsBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreatePlanViewManagerInstance¶

LineDesignerManager.CreatePlanViewManagerInstance¶

Creates the plan view manager instance

Signature CreatePlanViewManagerInstance(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.PlanViewManager`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreatePlatformEquipmentBuilder¶

LineDesignerManager.CreatePlatformEquipmentBuilder¶

Creates a Platform Equipment Builder

Signature CreatePlatformEquipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBPlatformEquipmentNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.PlatformEquipmentBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateProductionUnitCreatorBuilder¶

LineDesignerManager.CreateProductionUnitCreatorBuilder¶

Creates the production unit creator builder

Signature CreateProductionUnitCreatorBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.ProductionUnitCreatorBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateRailOpeningFeatureBuilder¶

LineDesignerManager.CreateRailOpeningFeatureBuilder¶

Creates the rail opening feature builder

Signature CreateRailOpeningFeatureBuilder(part, railingFeature)

Parameters:	part (`NXOpen.Part`) – railingFeature (`NXOpen.LineDesigner.RailOpeningFeature`) – `LineDesigner.RailOpeningFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.RailOpeningFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateRailingFeatureBuilder¶

LineDesignerManager.CreateRailingFeatureBuilder¶

Overloaded method CreateRailingFeatureBuilder

CreateRailingFeatureBuilder(part, railingFeature)
CreateRailingFeatureBuilder(part, node)

-------------------------------------

Creates the railing feature builder

Signature CreateRailingFeatureBuilder(part, railingFeature)

Parameters:	part (`NXOpen.Part`) – railingFeature (`NXOpen.LineDesigner.RailingFeature`) – `LineDesigner.RailingFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.RailingFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

Creates the railing feature builder

Signature CreateRailingFeatureBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.LineDesigner.DBNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.RailingFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

-------------------------------------

CreateRenameItemRevisionBuilder¶

LineDesignerManager.CreateRenameItemRevisionBuilder¶

Creates a Rename ItemRevision Builder

Signature CreateRenameItemRevisionBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.RenameItemRevisionBuilder`

New in version NX10.0.3.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateResizeConnectorBuilder¶

LineDesignerManager.CreateResizeConnectorBuilder¶

Creates a resize connector Builder

Signature CreateResizeConnectorBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.ResizeConnectorBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateSingleElementConveyorBuilder¶

LineDesignerManager.CreateSingleElementConveyorBuilder¶

Creates a single element conveyor builder

Signature CreateSingleElementConveyorBuilder(part, node)

Parameters:	part (`NXOpen.Part`) – node (`NXOpen.LineDesigner.DBConveyorNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.SingleElementConveyorBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateStairwayEquipmentBuilder¶

LineDesignerManager.CreateStairwayEquipmentBuilder¶

Creates the StairwayEquipment builder

Signature CreateStairwayEquipmentBuilder(part, dbnode)

Parameters:	part (`NXOpen.Part`) – dbnode (`NXOpen.LineDesigner.DBStairwayEquipmentNode`) –
Returns:
Return type:	`NXOpen.LineDesigner.StairwayEquipmentBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

CreateTypedConnectorFeatureBuilder¶

LineDesignerManager.CreateTypedConnectorFeatureBuilder¶

Creates the typed connector feature builder

Signature CreateTypedConnectorFeatureBuilder(part, typedConnectorFeature)

Parameters:	part (`NXOpen.Part`) – typedConnectorFeature (`NXOpen.LineDesigner.TypedConnectorFeature`) – `LineDesigner.TypedConnectorFeature` to be edited
Returns:
Return type:	`NXOpen.LineDesigner.TypedConnectorFeatureBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

DrawingSheetBuilder¶

LineDesignerManager.DrawingSheetBuilder¶

Creates the drawing sheet builder

Signature DrawingSheetBuilder(owningPart, sheet)

Parameters:	owningPart (`NXOpen.Part`) – sheet (`NXOpen.Drawings.DrawingSheet`) – the drawing sheet
Returns:	the drawing sheet Builder with this identifier
Return type:	`NXOpen.Drawings.DrawingSheetBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

GetApplicationBuilder¶

LineDesignerManager.GetApplicationBuilder¶

Return the application builder

Signature GetApplicationBuilder()

Returns:
Return type:	`NXOpen.LineDesigner.LineDesignerApplicationBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

GetFastPlacementUtilityBuilder¶

LineDesignerManager.GetFastPlacementUtilityBuilder¶

Get the fast placement utility builder

Signature GetFastPlacementUtilityBuilder(part)

Parameters:	part (`NXOpen.Part`) –
Returns:
Return type:	`NXOpen.LineDesigner.FastPlacementUtilityBuilder`

New in version NX10.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)

GetReuseLibraryUtilityBuilder¶

LineDesignerManager.GetReuseLibraryUtilityBuilder¶

Returns the reuse library utility builder

Signature GetReuseLibraryUtilityBuilder()

Returns:
Return type:	`NXOpen.LineDesigner.ReuseLibraryUtilityBuilder`

New in version NX9.0.0.

License requirements: ld_line_designer (“FULL LINE DESIGNER”)