TurnRoughFinishTestCut Class¶
-
class
NXOpen.CAM.
TurnRoughFinishTestCut
¶ Bases:
NXOpen.TaggedObject
Represents a test cut builder
New in version NX8.0.0.
Properties¶
Property | Description |
---|---|
CutType | Returns or sets the test cut type |
Direction | Returns or sets the test cut direction |
EndOfTestCut | Returns the end of test cut |
FeedIn | Returns or sets the test cut feed in |
FeedInAngle | Returns or sets the test cut feed in angle |
FeedInLength | Returns or sets the test cut feed in length |
FeedOut | Returns or sets the test cut feed out |
FeedOutAngle | Returns or sets the test cut feed out angle |
FeedOutLength | Returns or sets the test cut feed out length |
MeasuringPoint | Returns or sets the test cut measuring point |
MeasuringPosition | Returns or sets the test cut measuring position |
MeasuringStop | Returns the measuring stop |
NumberOfPasses | Returns or sets the test cut number of passes |
ReturnMoveOption | Returns or sets the test cut return move |
ReturnMovePoint | Returns or sets the test cut return move point |
SecondaryEndOfTestCut | Returns the secondary end of test cut |
SecondaryMeasuringStop | Returns the secondary measuring stop |
SecondarySequence | Returns or sets the secondary test cut sequence |
SecondaryStartOfTestCut | Returns the secondary start of test cut |
Sequence | Returns or sets the test cut sequence |
StartOfFinishPass | Returns the start of finish pass |
StartOfTestCut | Returns the start of test cut |
Stock | Returns or sets the test cut stock |
StockMode | Returns or sets the test cut stock mode |
StopDistance | Returns or sets the test cut stop distance |
StopPercentage | Returns or sets the test cut stop percentage |
StopPoint | Returns or sets the test cut stop point |
StopPosition | Returns or sets the test cut stop position |
Tag | Returns the Tag for this object. |
Methods¶
Enumerations¶
TurnRoughFinishTestCutCutTypes Enumeration | the test cut type options |
TurnRoughFinishTestCutDirectionTypes Enumeration | the test cut direction options |
TurnRoughFinishTestCutFeedInTypes Enumeration | the test cut feed in options |
TurnRoughFinishTestCutFeedOutTypes Enumeration | the test cut feed out options |
TurnRoughFinishTestCutMeasuringPositionTypes Enumeration | the test cut measuring position options |
TurnRoughFinishTestCutReturnMoveTypes Enumeration | the test cut return move options |
TurnRoughFinishTestCutSecondarySequenceTypes Enumeration | the secondary test cut sequence options |
TurnRoughFinishTestCutSequenceTypes Enumeration | the test cut sequence options |
TurnRoughFinishTestCutStockModeTypes Enumeration | the test cut stock mode options |
TurnRoughFinishTestCutStopPositionTypes Enumeration | the test cut stop position options |
Property Detail¶
CutType¶
-
TurnRoughFinishTestCut.
CutType
¶ Returns or sets the test cut type
-------------------------------------
Getter Method
Signature
CutType()
Returns: the test cut type Return type: NXOpen.CAM.TurnRoughFinishTestCutCutTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
CutType(cutType)
Parameters: cutType ( NXOpen.CAM.TurnRoughFinishTestCutCutTypes
) – the test cut typeNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
Direction¶
-
TurnRoughFinishTestCut.
Direction
¶ Returns or sets the test cut direction
-------------------------------------
Getter Method
Signature
Direction()
Returns: the test cut direction Return type: NXOpen.CAM.TurnRoughFinishTestCutDirectionTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Direction(direction)
Parameters: direction ( NXOpen.CAM.TurnRoughFinishTestCutDirectionTypes
) – the test cut directionNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
EndOfTestCut¶
-
TurnRoughFinishTestCut.
EndOfTestCut
¶ Returns the end of test cut
-------------------------------------
Getter Method
Signature
EndOfTestCut()
Returns: the end of test cut Return type: NXOpen.CAM.PostEventsCiBuilder
New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
FeedIn¶
-
TurnRoughFinishTestCut.
FeedIn
¶ Returns or sets the test cut feed in
-------------------------------------
Getter Method
Signature
FeedIn()
Returns: the test cut feed in Return type: NXOpen.CAM.TurnRoughFinishTestCutFeedInTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
FeedIn(feedIn)
Parameters: feedIn ( NXOpen.CAM.TurnRoughFinishTestCutFeedInTypes
) – the test cut feed inNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
FeedInAngle¶
-
TurnRoughFinishTestCut.
FeedInAngle
¶ Returns or sets the test cut feed in angle
-------------------------------------
Getter Method
Signature
FeedInAngle()
Returns: the test cut feed in angle Return type: float New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
FeedInAngle(feedInAngle)
Parameters: feedInAngle (float) – the test cut feed in angle New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
FeedInLength¶
-
TurnRoughFinishTestCut.
FeedInLength
¶ Returns or sets the test cut feed in length
-------------------------------------
Getter Method
Signature
FeedInLength()
Returns: the test cut feed in length Return type: float New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
FeedInLength(feedInLength)
Parameters: feedInLength (float) – the test cut feed in length New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
FeedOut¶
-
TurnRoughFinishTestCut.
FeedOut
¶ Returns or sets the test cut feed out
-------------------------------------
Getter Method
Signature
FeedOut()
Returns: the test cut feed out Return type: NXOpen.CAM.TurnRoughFinishTestCutFeedOutTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
FeedOut(feedOut)
Parameters: feedOut ( NXOpen.CAM.TurnRoughFinishTestCutFeedOutTypes
) – the test cut feed outNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
FeedOutAngle¶
-
TurnRoughFinishTestCut.
FeedOutAngle
¶ Returns or sets the test cut feed out angle
-------------------------------------
Getter Method
Signature
FeedOutAngle()
Returns: the test cut feed out angle Return type: float New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
FeedOutAngle(feedOutAngle)
Parameters: feedOutAngle (float) – the test cut feed out angle New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
FeedOutLength¶
-
TurnRoughFinishTestCut.
FeedOutLength
¶ Returns or sets the test cut feed out length
-------------------------------------
Getter Method
Signature
FeedOutLength()
Returns: the test cut feed out length Return type: float New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
FeedOutLength(feedOutLength)
Parameters: feedOutLength (float) – the test cut feed out length New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
MeasuringPoint¶
-
TurnRoughFinishTestCut.
MeasuringPoint
¶ Returns or sets the test cut measuring point
-------------------------------------
Getter Method
Signature
MeasuringPoint()
Returns: the test cut measuring point Return type: NXOpen.Point
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
MeasuringPoint(measuringPoint)
Parameters: measuringPoint ( NXOpen.Point
) – the test cut measuring pointNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
MeasuringPosition¶
-
TurnRoughFinishTestCut.
MeasuringPosition
¶ Returns or sets the test cut measuring position
-------------------------------------
Getter Method
Signature
MeasuringPosition()
Returns: the test cut measuring position Return type: NXOpen.CAM.TurnRoughFinishTestCutMeasuringPositionTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
MeasuringPosition(measuringPosition)
Parameters: measuringPosition ( NXOpen.CAM.TurnRoughFinishTestCutMeasuringPositionTypes
) – the test cut measuring positionNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
MeasuringStop¶
-
TurnRoughFinishTestCut.
MeasuringStop
¶ Returns the measuring stop
-------------------------------------
Getter Method
Signature
MeasuringStop()
Returns: the measuring stop Return type: NXOpen.CAM.PostEventsCiBuilder
New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
NumberOfPasses¶
-
TurnRoughFinishTestCut.
NumberOfPasses
¶ Returns or sets the test cut number of passes
-------------------------------------
Getter Method
Signature
NumberOfPasses()
Returns: the test cut number of passes Return type: int New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
NumberOfPasses(numberOfPasses)
Parameters: numberOfPasses (int) – the test cut number of passes New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
ReturnMoveOption¶
-
TurnRoughFinishTestCut.
ReturnMoveOption
¶ Returns or sets the test cut return move
-------------------------------------
Getter Method
Signature
ReturnMoveOption()
Returns: the test cut return move Return type: NXOpen.CAM.TurnRoughFinishTestCutReturnMoveTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
ReturnMoveOption(returnMove)
Parameters: returnMove ( NXOpen.CAM.TurnRoughFinishTestCutReturnMoveTypes
) – the test cut return moveNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
ReturnMovePoint¶
-
TurnRoughFinishTestCut.
ReturnMovePoint
¶ Returns or sets the test cut return move point
-------------------------------------
Getter Method
Signature
ReturnMovePoint()
Returns: the test cut return move point Return type: NXOpen.Point
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
ReturnMovePoint(returnMovePoint)
Parameters: returnMovePoint ( NXOpen.Point
) – the test cut return move pointNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
SecondaryEndOfTestCut¶
-
TurnRoughFinishTestCut.
SecondaryEndOfTestCut
¶ Returns the secondary end of test cut
-------------------------------------
Getter Method
Signature
SecondaryEndOfTestCut()
Returns: the secondary end of test cut Return type: NXOpen.CAM.PostEventsCiBuilder
New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
SecondaryMeasuringStop¶
-
TurnRoughFinishTestCut.
SecondaryMeasuringStop
¶ Returns the secondary measuring stop
-------------------------------------
Getter Method
Signature
SecondaryMeasuringStop()
Returns: the secondary measuring stop Return type: NXOpen.CAM.PostEventsCiBuilder
New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
SecondarySequence¶
-
TurnRoughFinishTestCut.
SecondarySequence
¶ Returns or sets the secondary test cut sequence
-------------------------------------
Getter Method
Signature
SecondarySequence()
Returns: the sequence test cut sequence Return type: NXOpen.CAM.TurnRoughFinishTestCutSecondarySequenceTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
SecondarySequence(secondarySequence)
Parameters: secondarySequence ( NXOpen.CAM.TurnRoughFinishTestCutSecondarySequenceTypes
) – the sequence test cut sequenceNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
SecondaryStartOfTestCut¶
-
TurnRoughFinishTestCut.
SecondaryStartOfTestCut
¶ Returns the secondary start of test cut
-------------------------------------
Getter Method
Signature
SecondaryStartOfTestCut()
Returns: the secondary start of test cut Return type: NXOpen.CAM.PostEventsCiBuilder
New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
Sequence¶
-
TurnRoughFinishTestCut.
Sequence
¶ Returns or sets the test cut sequence
-------------------------------------
Getter Method
Signature
Sequence()
Returns: the test cut sequence Return type: NXOpen.CAM.TurnRoughFinishTestCutSequenceTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Sequence(sequence)
Parameters: sequence ( NXOpen.CAM.TurnRoughFinishTestCutSequenceTypes
) – the test cut sequenceNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
StartOfFinishPass¶
-
TurnRoughFinishTestCut.
StartOfFinishPass
¶ Returns the start of finish pass
-------------------------------------
Getter Method
Signature
StartOfFinishPass()
Returns: the start of finish pass Return type: NXOpen.CAM.PostEventsCiBuilder
New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
StartOfTestCut¶
-
TurnRoughFinishTestCut.
StartOfTestCut
¶ Returns the start of test cut
-------------------------------------
Getter Method
Signature
StartOfTestCut()
Returns: the start of test cut Return type: NXOpen.CAM.PostEventsCiBuilder
New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
Stock¶
-
TurnRoughFinishTestCut.
Stock
¶ Returns or sets the test cut stock
-------------------------------------
Getter Method
Signature
Stock()
Returns: the test cut stock Return type: float New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
Stock(stock)
Parameters: stock (float) – the test cut stock New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
StockMode¶
-
TurnRoughFinishTestCut.
StockMode
¶ Returns or sets the test cut stock mode
-------------------------------------
Getter Method
Signature
StockMode()
Returns: the test cut stock mode Return type: NXOpen.CAM.TurnRoughFinishTestCutStockModeTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
StockMode(stockMode)
Parameters: stockMode ( NXOpen.CAM.TurnRoughFinishTestCutStockModeTypes
) – the test cut stock modeNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
StopDistance¶
-
TurnRoughFinishTestCut.
StopDistance
¶ Returns or sets the test cut stop distance
-------------------------------------
Getter Method
Signature
StopDistance()
Returns: the test cut stop distance Return type: float New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
StopDistance(stopDistance)
Parameters: stopDistance (float) – the test cut stop distance New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
StopPercentage¶
-
TurnRoughFinishTestCut.
StopPercentage
¶ Returns or sets the test cut stop percentage
-------------------------------------
Getter Method
Signature
StopPercentage()
Returns: the test cut stop percentage Return type: float New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
StopPercentage(stopPercentage)
Parameters: stopPercentage (float) – the test cut stop percentage New in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
StopPoint¶
-
TurnRoughFinishTestCut.
StopPoint
¶ Returns or sets the test cut stop point
-------------------------------------
Getter Method
Signature
StopPoint()
Returns: the test cut stop point Return type: NXOpen.Point
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
StopPoint(stopPoint)
Parameters: stopPoint ( NXOpen.Point
) – the test cut stop pointNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)
StopPosition¶
-
TurnRoughFinishTestCut.
StopPosition
¶ Returns or sets the test cut stop position
-------------------------------------
Getter Method
Signature
StopPosition()
Returns: the test cut stop position Return type: NXOpen.CAM.TurnRoughFinishTestCutStopPositionTypes
New in version NX8.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
StopPosition(stopPosition)
Parameters: stopPosition ( NXOpen.CAM.TurnRoughFinishTestCutStopPositionTypes
) – the test cut stop positionNew in version NX8.0.0.
License requirements: cam_base (“CAM BASE”)