Manages results
To obtain an instance of this class, refer to NXOpen::Session

Created in NX6.0.2. More...

Public Member Functions
void	ConvertOdbFile (const NXString &inputFileName, const NXString &outputFileName)
	Convert older version of ODB file to currently supported version Created in NX6.0.2. More...

void	ConvertOdbFile (const char inputFileName, const char outputFileName)
	Convert older version of ODB file to currently supported version Created in NX6.0.2. More...

NXOpen::CAE::Post3DGraphBuilder *	Create3dGraphBuilder (NXOpen::CAE::ResultProbe *parameter)
	Returns a builder used for creating 3d graphs across iterations. More...

NXOpen::CAE::ClippingParameters *	CreateClippingParameters ()
	Creates a clipping parameter object. More...

NXOpen::CAE::CrossSectionParameters *	CreateCrossSectionParameters ()
	Creates a cross-section parameter object. More...

NXOpen::CAE::SolutionResult *	CreateDaoOptimizationSolutionResult (NXOpen::CAE::Optimization::DAOSolution *daoOptimizationSolution)
	Creates a solution result object given a NXOpen::CAE::Optimization::DAOSolution It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::CAE::DeformationParameters *	CreateDeformationParameters ()
	Creates a deformation parameter object. More...

NXOpen::CAE::SolutionResult *	CreateDurabilityEventResult (NXOpen::CAE::DurabilityEvent *durablityEvent)
	Creates a solution result object given a NXOpen::CAE::DurabilityEvent It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::CAE::FreeBodyResultsBuilder *	CreateFreeBodyResultsBuilder ()
	Creates a free body results builder. More...

NXOpen::CAE::PostGraphAcrossIterationsBuilder *	CreateGraphAcrossIterationsBuilder (int pvid)
	Returns a builder used for creating graphs of postview result values across iterations. More...

NXOpen::CAE::PostGraphAcrossIterationsBuilder *	CreateGraphAcrossIterationsBuilder (int firstpvid, int secondpvid)
	Returns a builder used for creating graphs of two postview result values across iterations. More...

NXOpen::CAE::PostGraphAcrossIterationsBuilder *	CreateGraphAcrossIterationsBuilder (NXOpen::CAE::Result result, NXOpen::CAE::ResultParameters parameter)
	Returns a builder used for creating graphs across iterations of result values of result parameter. More...

NXOpen::CAE::PostGraphAcrossIterationsBuilder *	CreateGraphAcrossIterationsBuilder (NXOpen::CAE::ResultProbe *parameter)
	Returns a builder used for creating graphs across iterations of result values of result parameter. More...

NXOpen::CAE::PostGraphAcrossIterationsBuilder *	CreateGraphAcrossIterationsBuilder (NXOpen::CAE::Result result, NXOpen::CAE::ResultParameters parameter1, NXOpen::CAE::ResultParameters *parameter2)
	Returns a builder used for creating graphs across iterations of result values two result parameters. More...

NXOpen::CAE::PostGraphAcrossIterationsBuilder *	CreateGraphAcrossIterationsBuilder (NXOpen::CAE::Result result, const std::vector< NXOpen::CAE::ResultParameters > &parameters, std::vector< NXString > &names, const NXString &formula)
	Returns a builder used for creating graphs across iterations of result values of expression. More...

NXOpen::CAE::PostGraphAcrossIterationsBuilder *	CreateGraphAcrossIterationsBuilder (NXOpen::CAE::Result result, const std::vector< NXOpen::CAE::ResultParameters > &parameters, std::vector< NXString > &names, const char *formula)
	Returns a builder used for creating graphs across iterations of result values of expression. More...

NXOpen::CAE::PostGraphAlongPathBuilder *	CreateGraphAlongPathBuilder (int pvid)
	Returns a builder used for creating the graph of result values of postview result defined by series of entities or path object. More...

NXOpen::CAE::PostGraphAlongPathBuilder *	CreateGraphAlongPathBuilder (int firstpvid, int secondpvid)
	Returns a builder used for creating the graph of result values of two postviews defined by series of entities or path object. More...

NXOpen::CAE::PostGraphAlongPathBuilder *	CreateGraphAlongPathBuilder (NXOpen::CAE::Result result, NXOpen::CAE::ResultParameters parameter)
	Returns a builder used for creating the graph of result values series of entities or path object defined by result parameter. More...

NXOpen::CAE::PostGraphAlongPathBuilder *	CreateGraphAlongPathBuilder (NXOpen::CAE::ResultProbe *parameter)
	Returns a builder used for creating the graph of result values series of entities or path object defined by result parameter. More...

NXOpen::CAE::PostGraphAlongPathBuilder *	CreateGraphAlongPathBuilder (NXOpen::CAE::Result result, NXOpen::CAE::ResultParameters parameter1, NXOpen::CAE::ResultParameters *parameter2)
	Returns a builder used for creating the graph of result values of series of entities or path object defined by two result parameter. More...

NXOpen::CAE::PostGraphOrbitBuilder *	CreateGraphOrbitBuilder (int pvid)
	Returns a builder used for creating the orbit graph from postview. More...

NXOpen::CAE::PostGraphOrbitBuilder *	CreateGraphOrbitBuilder (NXOpen::CAE::Result result, NXOpen::CAE::ResultParameters parameter)
	Returns a builder used for creating the orbit graph from result defined by result parameter. More...

NXOpen::CAE::ImportedResult *	CreateImportedResult (const NXString &filename, const NXOpen::CAE::Result::ResultBasicUnit &unitsystem)
	Creates a imported result object given a solver results file and the unit systems that these results are defined in. More...

NXOpen::CAE::ImportedResult *	CreateImportedResult (const char *filename, const NXOpen::CAE::Result::ResultBasicUnit &unitsystem)
	Creates a imported result object given a solver results file and the unit systems that these results are defined in. More...

NXOpen::CAE::ImportedResult *	CreateImportedResult (const NXString &filename, const NXString &resultname, const NXOpen::CAE::Result::ResultBasicUnit &unitsystem)
	Creates a imported result object given a solver results file and the unit systems that these results are defined in. More...

NXOpen::CAE::ImportedResult *	CreateImportedResult (const char filename, const char resultname, const NXOpen::CAE::Result::ResultBasicUnit &unitsystem)
	Creates a imported result object given a solver results file and the unit systems that these results are defined in. More...

NXOpen::CAE::ImportedResult *	CreateImportedResult (const NXString &filename, const NXString &resultname)
	Creates a imported result object given a solver results file. More...

NXOpen::CAE::ImportedResult *	CreateImportedResult (const char filename, const char resultname)
	Creates a imported result object given a solver results file. More...

NXOpen::CAE::CreateJtBuilder *	CreateJtBuilder ()
	Creates a builder for exporting a component or result type JT. More...

NXOpen::CAE::SolutionResult *	CreateLaminateDynamicEventResult (NXOpen::CAE::LaminateDynamicEvent *dynEvent)
	Creates a solution result object given a NXOpen::CAE::LaminateDynamicEvent It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::CAE::SolutionResult *	CreateLaminateGraphicalReportResult (NXOpen::CAE::LaminateGraphicalReport *lamGraphReport)
	Creates a solution result object given a NXOpen::CAE::LaminateGraphicalReport It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::CAE::PostJtExportBuilder *	CreatePostJtBuilder ()
	Creates a builder for exporting a component or result type JT. More...

NXOpen::CAE::SolutionResult *	CreateReferenceResult (NXOpen::CAE::SimResultReference *solution)
	Creates a reference result object given a NXOpen::CAE::SimResultReference It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::CAE::SolutionResult *	CreateResponseEventResult (NXOpen::CAE::ResponseSimulation::RSEvent *responseSolution)
	Creates a solution result object given a NXOpen::CAE::ResponseSimulation::RSEvent It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::CAE::SolutionResult *	CreateResponseSolutionResult (NXOpen::CAE::ResponseSimulation::Solution *responseSolution)
	Creates a solution result object given a NXOpen::CAE::ResponseSimulation::Solution It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::CAE::ResultAccess *	CreateResultAccess (NXOpen::CAE::Result result, NXOpen::CAE::ResultParameters parameters)
	Creates a result access object It is user's responsibility to destroy the result access object once done using NXOpen::CAE::ResultManager::DeleteResultAccess , in order to free up system resources. More...

NXOpen::CAE::ResultAccess *	CreateResultAccess (int postViewID)
	Creates a result access object based on an existing Post View It is user's responsibility to destroy the result access object once done using NXOpen::CAE::ResultManager::DeleteResultAccess , in order to free up system resources. More...

NXOpen::Fields::FieldReference *	CreateResultAccessReferenceField (NXOpen::Fields::FieldManager fieldManager, NXOpen::CAE::Result result, NXOpen::CAE::ResultParameters *parameters, const NXString &depDemainName, const NXString &fieldName)
	Creates a result access reference field object. More...

NXOpen::Fields::FieldReference *	CreateResultAccessReferenceField (NXOpen::Fields::FieldManager fieldManager, NXOpen::CAE::Result result, NXOpen::CAE::ResultParameters parameters, const char depDemainName, const char *fieldName)
	Creates a result access reference field object. More...

NXOpen::CAE::ResultParameters *	CreateResultParameters ()
	Creates a result parameter object. More...

NXOpen::CAE::ResultParametersWithProbe *	CreateResultParametersWithProbe (NXOpen::CAE::ResultProbe *resultProbe)
	Creates a result parameter object for given Result Probe. More...

NXOpen::CAE::ResultsCombinationBuilder *	CreateResultsCombinationBuilder ()
	Creates a results combination builder. More...

NXOpen::CAE::ResultsEnvelopeBuilder *	CreateResultsEnvelopeBuilder ()
	Creates a results envelope builder. More...

NXOpen::CAE::ResultsModelExportBuilder *	CreateResultsModelExportBuilder ()
	Creates a model export builder. More...

NXOpen::CAE::ResultsReductionBuilder *	CreateResultsReductionBuilder ()
	Creates a results reduction builder. More...

NXOpen::CAE::ResultVariable *	CreateResultvariable (NXOpen::CAE::SimSimulation *sim, NXOpen::CAE::Result::Quantity quan, NXOpen::CAE::Result::Location loc, NXOpen::CAE::Result::Component comp, const NXString &restypename, const NXString &name)
	Creates Result Variable object. More...

NXOpen::CAE::ResultVariable *	CreateResultvariable (NXOpen::CAE::SimSimulation sim, NXOpen::CAE::Result::Quantity quan, NXOpen::CAE::Result::Location loc, NXOpen::CAE::Result::Component comp, const char restypename, const char *name)
	Creates Result Variable object. More...

NXOpen::CAE::Result *	CreateSeResult (NXOpen::CAE::Result *parentResult, int seid)
	Creates a result object given a seid within an existing NXOpen::CAE::Result . More...

NXOpen::CAE::SolutionResult *	CreateSolutionResult (NXOpen::CAE::SimSolution *solution)
	Creates a solution result object given a NXOpen::CAE::SimSolution It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::Fields::FieldTable *	CreateTableFieldFromProbe (const NXString &fieldName, const std::vector< NXOpen::Fields::FieldVariable * > &indepVarArray, const std::vector< NXOpen::Fields::FieldVariable * > &depVarArray, NXOpen::CAE::ResultProbe *resultProbe, bool createTableOfFields)
	Creates a field from the lists of independent, dependent variables along with a given Result Probe. More...

NXOpen::Fields::FieldTable *	CreateTableFieldFromProbe (const char fieldName, const std::vector< NXOpen::Fields::FieldVariable > &indepVarArray, const std::vector< NXOpen::Fields::FieldVariable * > &depVarArray, NXOpen::CAE::ResultProbe *resultProbe, bool createTableOfFields)
	Creates a field from the lists of independent, dependent variables along with a given Result Probe. More...

NXOpen::CAE::SolutionResult *	CreateTbsOptimizationSolutionResult (NXOpen::CAE::Optimization::TBSOptimizationSolution *tbsOptimizationSolution)
	Creates a solution result object given a NXOpen::CAE::Optimization::TBSOptimizationSolution It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources. More...

NXOpen::CAE::TransientResultsReductionBuilder *	CreateTransientResultsReductionBuilder ()
	Creates a transient results reduction builder. More...

void	DeleteClippingParameters (NXOpen::CAE::ClippingParameters *result)
	Delete a NXOpen::CAE::ClippingParameters object. More...

void	DeleteCrossSectionParameters (NXOpen::CAE::CrossSectionParameters *crossSection)
	Delete a NXOpen::CAE::CrossSectionParameters object. More...

void	DeleteDeformationParameters (NXOpen::CAE::DeformationParameters *result)
	Delete a NXOpen::CAE::DeformationParameters object. More...

void	DeleteFreeBodyResultsBuilder (NXOpen::CAE::FreeBodyResultsBuilder *builder)
	Delete a NXOpen::CAE::FreeBodyResultsBuilder object. More...

void	DeletePostJtBuilder (NXOpen::CAE::PostJtExportBuilder *builder)
	Delete a NXOpen::CAE::PostJtExportBuilder object. More...

void	DeleteResult (NXOpen::CAE::Result *result)
	Delete a NXOpen::CAE::Result object. More...

void	DeleteResultAccess (NXOpen::CAE::ResultAccess *result)
	Delete a NXOpen::CAE::ResultAccess object. More...

void	DeleteResultParameters (NXOpen::CAE::ResultParameters *result)
	Delete a NXOpen::CAE::ResultParameters object. More...

void	DeleteResultParametersWithProbe (NXOpen::CAE::ResultParametersWithProbe *result)
	Delete a NXOpen::CAE::ResultParametersWithProbe object. More...

NXOpen::TaggedObject *	FindObject (const NXString &journalIdentifier)
	Returns a NXOpen::CAE::Result. More...

NXOpen::TaggedObject *	FindObject (const char *journalIdentifier)
	Returns a NXOpen::CAE::Result. More...

tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Manages results
To obtain an instance of this class, refer to NXOpen::Session

Created in NX6.0.2.

Member Function Documentation

void NXOpen::CAE::ResultManager::ConvertOdbFile	(	const NXString &	inputFileName,
		const NXString &	outputFileName
	)

Convert older version of ODB file to currently supported version
Created in NX6.0.2.

License requirements : None

Parameters

inputFileName	NOTE: The full Unicode character set is not supported for this parameter.
outputFileName	NOTE: The full Unicode character set is not supported for this parameter.

void NXOpen::CAE::ResultManager::ConvertOdbFile	(	const char *	inputFileName,
		const char *	outputFileName
	)

Convert older version of ODB file to currently supported version
Created in NX6.0.2.

License requirements : None

Parameters

inputFileName	NOTE: The full Unicode character set is not supported for this parameter.
outputFileName	NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAE::Post3DGraphBuilder* NXOpen::CAE::ResultManager::Create3dGraphBuilder ( NXOpen::CAE::ResultProbe * parameter )

Returns a builder used for creating 3d graphs across iterations.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

parameter parameter

NXOpen::CAE::ClippingParameters* NXOpen::CAE::ResultManager::CreateClippingParameters ( )

Creates a clipping parameter object.

It is user's responsibility to destroy the clipping parameters object once done using NXOpen::CAE::ResultManager::DeleteClippingParameters , in order to free up system resources

Returns: Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::CrossSectionParameters* NXOpen::CAE::ResultManager::CreateCrossSectionParameters ( )

Creates a cross-section parameter object.

It is user's responsibility to destroy the crosss-section parameters object once done using NXOpen::CAE::ResultManager::DeleteCrossSectionParameters , in order to free up system resources

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateDaoOptimizationSolutionResult ( NXOpen::CAE::Optimization::DAOSolution * daoOptimizationSolution )

Creates a solution result object given a NXOpen::CAE::Optimization::DAOSolution It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created in NX8.0.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

daoOptimizationSolution daooptimizationsolution

NXOpen::CAE::DeformationParameters* NXOpen::CAE::ResultManager::CreateDeformationParameters ( )

Creates a deformation parameter object.

It is user's responsibility to destroy the deformation parameters object once done using NXOpen::CAE::ResultManager::DeleteDeformationParameters , in order to free up system resources

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateDurabilityEventResult ( NXOpen::CAE::DurabilityEvent * durablityEvent )

Creates a solution result object given a NXOpen::CAE::DurabilityEvent It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

durablityEvent durablityevent

NXOpen::CAE::FreeBodyResultsBuilder* NXOpen::CAE::ResultManager::CreateFreeBodyResultsBuilder ( )

Creates a free body results builder.

It is user's responsibility to destroy the builder object once done using NXOpen::CAE::ResultManager::DeleteFreeBodyResultsBuilder , in order to free up system resources

Returns: Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::PostGraphAcrossIterationsBuilder* NXOpen::CAE::ResultManager::CreateGraphAcrossIterationsBuilder ( int pvid )

Returns a builder used for creating graphs of postview result values across iterations.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

pvid pvid

NXOpen::CAE::PostGraphAcrossIterationsBuilder* NXOpen::CAE::ResultManager::CreateGraphAcrossIterationsBuilder	(	int	firstpvid,
		int	secondpvid
	)

Returns a builder used for creating graphs of two postview result values across iterations.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

firstpvid	firstpvid
secondpvid	secondpvid

NXOpen::CAE::PostGraphAcrossIterationsBuilder* NXOpen::CAE::ResultManager::CreateGraphAcrossIterationsBuilder	(	NXOpen::CAE::Result *	result,
		NXOpen::CAE::ResultParameters *	parameter
	)

Returns a builder used for creating graphs across iterations of result values of result parameter.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result	set result
parameter	parameter

NXOpen::CAE::PostGraphAcrossIterationsBuilder* NXOpen::CAE::ResultManager::CreateGraphAcrossIterationsBuilder ( NXOpen::CAE::ResultProbe * parameter )

Returns a builder used for creating graphs across iterations of result values of result parameter.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

parameter parameter

NXOpen::CAE::PostGraphAcrossIterationsBuilder* NXOpen::CAE::ResultManager::CreateGraphAcrossIterationsBuilder	(	NXOpen::CAE::Result *	result,
		NXOpen::CAE::ResultParameters *	parameter1,
		NXOpen::CAE::ResultParameters *	parameter2
	)

Returns a builder used for creating graphs across iterations of result values two result parameters.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result	set result
parameter1	parameter1
parameter2	parameter2

NXOpen::CAE::PostGraphAcrossIterationsBuilder* NXOpen::CAE::ResultManager::CreateGraphAcrossIterationsBuilder	(	NXOpen::CAE::Result *	result,
		const std::vector< NXOpen::CAE::ResultParameters * > &	parameters,
		std::vector< NXString > &	names,
		const NXString &	formula
	)

Returns a builder used for creating graphs across iterations of result values of expression.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result	set result
parameters	set result parameters
names	set result names NOTE: The full Unicode character set is not supported for this parameter.
formula	set formula NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAE::PostGraphAcrossIterationsBuilder* NXOpen::CAE::ResultManager::CreateGraphAcrossIterationsBuilder	(	NXOpen::CAE::Result *	result,
		const std::vector< NXOpen::CAE::ResultParameters * > &	parameters,
		std::vector< NXString > &	names,
		const char *	formula
	)

Returns a builder used for creating graphs across iterations of result values of expression.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result	set result
parameters	set result parameters
names	set result names NOTE: The full Unicode character set is not supported for this parameter.
formula	set formula NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAE::PostGraphAlongPathBuilder* NXOpen::CAE::ResultManager::CreateGraphAlongPathBuilder ( int pvid )

Returns a builder used for creating the graph of result values of postview result defined by series of entities or path object.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

pvid pvid

NXOpen::CAE::PostGraphAlongPathBuilder* NXOpen::CAE::ResultManager::CreateGraphAlongPathBuilder	(	int	firstpvid,
		int	secondpvid
	)

Returns a builder used for creating the graph of result values of two postviews defined by series of entities or path object.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

firstpvid	firstpvid
secondpvid	secondpvid

NXOpen::CAE::PostGraphAlongPathBuilder* NXOpen::CAE::ResultManager::CreateGraphAlongPathBuilder	(	NXOpen::CAE::Result *	result,
		NXOpen::CAE::ResultParameters *	parameter
	)

Returns a builder used for creating the graph of result values series of entities or path object defined by result parameter.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result	set result
parameter	parameter

NXOpen::CAE::PostGraphAlongPathBuilder* NXOpen::CAE::ResultManager::CreateGraphAlongPathBuilder ( NXOpen::CAE::ResultProbe * parameter )

Returns a builder used for creating the graph of result values series of entities or path object defined by result parameter.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

parameter parameter

NXOpen::CAE::PostGraphAlongPathBuilder* NXOpen::CAE::ResultManager::CreateGraphAlongPathBuilder	(	NXOpen::CAE::Result *	result,
		NXOpen::CAE::ResultParameters *	parameter1,
		NXOpen::CAE::ResultParameters *	parameter2
	)

Returns a builder used for creating the graph of result values of series of entities or path object defined by two result parameter.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result	set result
parameter1	parameter1
parameter2	parameter2

NXOpen::CAE::PostGraphOrbitBuilder* NXOpen::CAE::ResultManager::CreateGraphOrbitBuilder ( int pvid )

Returns a builder used for creating the orbit graph from postview.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

pvid pvid

NXOpen::CAE::PostGraphOrbitBuilder* NXOpen::CAE::ResultManager::CreateGraphOrbitBuilder	(	NXOpen::CAE::Result *	result,
		NXOpen::CAE::ResultParameters *	parameter
	)

Returns a builder used for creating the orbit graph from result defined by result parameter.

It is user's responsibility to destroy the builder object once done using Builder::Destroy , in order to free up system resources

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result	set result
parameter	parameter

NXOpen::CAE::ImportedResult* NXOpen::CAE::ResultManager::CreateImportedResult	(	const NXString &	filename,
		const NXOpen::CAE::Result::ResultBasicUnit &	unitsystem
	)

Creates a imported result object given a solver results file and the unit systems that these results are defined in.

It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

filename	NOTE: The full Unicode character set is not supported for this parameter.
unitsystem	unitsystem

NXOpen::CAE::ImportedResult* NXOpen::CAE::ResultManager::CreateImportedResult	(	const char *	filename,
		const NXOpen::CAE::Result::ResultBasicUnit &	unitsystem
	)

Creates a imported result object given a solver results file and the unit systems that these results are defined in.

It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

filename	NOTE: The full Unicode character set is not supported for this parameter.
unitsystem	unitsystem

NXOpen::CAE::ImportedResult* NXOpen::CAE::ResultManager::CreateImportedResult	(	const NXString &	filename,
		const NXString &	resultname,
		const NXOpen::CAE::Result::ResultBasicUnit &	unitsystem
	)

Creates a imported result object given a solver results file and the unit systems that these results are defined in.

It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

filename	NOTE: The full Unicode character set is not supported for this parameter.
resultname	NOTE: The full Unicode character set is not supported for this parameter.
unitsystem	unitsystem

NXOpen::CAE::ImportedResult* NXOpen::CAE::ResultManager::CreateImportedResult	(	const char *	filename,
		const char *	resultname,
		const NXOpen::CAE::Result::ResultBasicUnit &	unitsystem
	)

Creates a imported result object given a solver results file and the unit systems that these results are defined in.

It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

filename	NOTE: The full Unicode character set is not supported for this parameter.
resultname	NOTE: The full Unicode character set is not supported for this parameter.
unitsystem	unitsystem

NXOpen::CAE::ImportedResult* NXOpen::CAE::ResultManager::CreateImportedResult	(	const NXString &	filename,
		const NXString &	resultname
	)

Creates a imported result object given a solver results file.

The unit systems is infered from the result file and Part. It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

filename	NOTE: The full Unicode character set is not supported for this parameter.
resultname	NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAE::ImportedResult* NXOpen::CAE::ResultManager::CreateImportedResult	(	const char *	filename,
		const char *	resultname
	)

Creates a imported result object given a solver results file.

The unit systems is infered from the result file and Part. It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

filename	NOTE: The full Unicode character set is not supported for this parameter.
resultname	NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAE::CreateJtBuilder* NXOpen::CAE::ResultManager::CreateJtBuilder ( )

Creates a builder for exporting a component or result type JT.

Returns: Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateLaminateDynamicEventResult ( NXOpen::CAE::LaminateDynamicEvent * dynEvent )

Creates a solution result object given a NXOpen::CAE::LaminateDynamicEvent It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created solution result given the input dynamic event
Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

dynEvent The dynamic event

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateLaminateGraphicalReportResult ( NXOpen::CAE::LaminateGraphicalReport * lamGraphReport )

Creates a solution result object given a NXOpen::CAE::LaminateGraphicalReport It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created solution result given the input laminate graphical report specifications
Created in NX8.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

lamGraphReport The laminate graphical report specifications

NXOpen::CAE::PostJtExportBuilder* NXOpen::CAE::ResultManager::CreatePostJtBuilder ( )

Creates a builder for exporting a component or result type JT.

Returns: Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateReferenceResult ( NXOpen::CAE::SimResultReference * solution )

Creates a reference result object given a NXOpen::CAE::SimResultReference It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

solution solution

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateResponseEventResult ( NXOpen::CAE::ResponseSimulation::RSEvent * responseSolution )

Creates a solution result object given a NXOpen::CAE::ResponseSimulation::RSEvent It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

responseSolution responsesolution

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateResponseSolutionResult ( NXOpen::CAE::ResponseSimulation::Solution * responseSolution )

Creates a solution result object given a NXOpen::CAE::ResponseSimulation::Solution It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

responseSolution responsesolution

NXOpen::CAE::ResultAccess* NXOpen::CAE::ResultManager::CreateResultAccess	(	NXOpen::CAE::Result *	result,
		NXOpen::CAE::ResultParameters *	parameters
	)

Creates a result access object It is user's responsibility to destroy the result access object once done using NXOpen::CAE::ResultManager::DeleteResultAccess , in order to free up system resources.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result	analysis results for which you want to access information
parameters	defines the specific results state you wish to access

NXOpen::CAE::ResultAccess* NXOpen::CAE::ResultManager::CreateResultAccess ( int postViewID )

Creates a result access object based on an existing Post View It is user's responsibility to destroy the result access object once done using NXOpen::CAE::ResultManager::DeleteResultAccess , in order to free up system resources.

Returns: Created in NX8.5.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

postViewID an existing PostView Id

NXOpen::Fields::FieldReference* NXOpen::CAE::ResultManager::CreateResultAccessReferenceField	(	NXOpen::Fields::FieldManager *	fieldManager,
		NXOpen::CAE::Result *	result,
		NXOpen::CAE::ResultParameters *	parameters,
		const NXString &	depDemainName,
		const NXString &	fieldName
	)

Creates a result access reference field object.

The created field is automatically made persistent and stored in the collection of fields for the part.

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

fieldManager	field manager in part
result	analysis results for which you want to access information
parameters	defines the specific results state you wish to access
depDemainName	alphanumeric string; it must match with existing domain names NOTE: The full Unicode character set is not supported for this parameter.
fieldName	field name NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::Fields::FieldReference* NXOpen::CAE::ResultManager::CreateResultAccessReferenceField	(	NXOpen::Fields::FieldManager *	fieldManager,
		NXOpen::CAE::Result *	result,
		NXOpen::CAE::ResultParameters *	parameters,
		const char *	depDemainName,
		const char *	fieldName
	)

Creates a result access reference field object.

The created field is automatically made persistent and stored in the collection of fields for the part.

Returns: Created in NX9.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

fieldManager	field manager in part
result	analysis results for which you want to access information
parameters	defines the specific results state you wish to access
depDemainName	alphanumeric string; it must match with existing domain names NOTE: The full Unicode character set is not supported for this parameter.
fieldName	field name NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAE::ResultParameters* NXOpen::CAE::ResultManager::CreateResultParameters ( )

Creates a result parameter object.

It is user's responsibility to destroy the result parameters object once done using NXOpen::CAE::ResultManager::DeleteResultParameters , in order to free up system resources

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::ResultParametersWithProbe* NXOpen::CAE::ResultManager::CreateResultParametersWithProbe ( NXOpen::CAE::ResultProbe * resultProbe )

Creates a result parameter object for given Result Probe.

It is user's responsibility to destroy the result parameters object once done using NXOpen::CAE::ResultManager::DeleteResultParametersWithProbe , in order to free up system resources

Returns: Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

resultProbe result probe

NXOpen::CAE::ResultsCombinationBuilder* NXOpen::CAE::ResultManager::CreateResultsCombinationBuilder ( )

Creates a results combination builder.

It is user's responsibility to destroy the builder object once done

Returns: Created in NX7.5.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::ResultsEnvelopeBuilder* NXOpen::CAE::ResultManager::CreateResultsEnvelopeBuilder ( )

Creates a results envelope builder.

It is user's responsibility to destroy the builder object once done

Returns: Created in NX7.5.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::ResultsModelExportBuilder* NXOpen::CAE::ResultManager::CreateResultsModelExportBuilder ( )

Creates a model export builder.

It is user's responsibility to destroy the builder object once done

Returns: Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::ResultsReductionBuilder* NXOpen::CAE::ResultManager::CreateResultsReductionBuilder ( )

Creates a results reduction builder.

It is user's responsibility to destroy the builder object once done

Returns: Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::ResultVariable* NXOpen::CAE::ResultManager::CreateResultvariable	(	NXOpen::CAE::SimSimulation *	sim,
		NXOpen::CAE::Result::Quantity	quan,
		NXOpen::CAE::Result::Location	loc,
		NXOpen::CAE::Result::Component	comp,
		const NXString &	restypename,
		const NXString &	name
	)

Creates Result Variable object.

Returns: Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

sim	Simulation
quan	quan
loc	loc
comp	comp
restypename	Result Type UserName, If not sure pass empty string NOTE: The full Unicode character set is not supported for this parameter.
name	Result Variable name NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAE::ResultVariable* NXOpen::CAE::ResultManager::CreateResultvariable	(	NXOpen::CAE::SimSimulation *	sim,
		NXOpen::CAE::Result::Quantity	quan,
		NXOpen::CAE::Result::Location	loc,
		NXOpen::CAE::Result::Component	comp,
		const char *	restypename,
		const char *	name
	)

Creates Result Variable object.

Returns: Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

sim	Simulation
quan	quan
loc	loc
comp	comp
restypename	Result Type UserName, If not sure pass empty string NOTE: The full Unicode character set is not supported for this parameter.
name	Result Variable name NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAE::Result* NXOpen::CAE::ResultManager::CreateSeResult	(	NXOpen::CAE::Result *	parentResult,
		int	seid
	)

Creates a result object given a seid within an existing NXOpen::CAE::Result .

It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources

Returns: Created in NX8.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

parentResult	parent result
seid	seid

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateSolutionResult ( NXOpen::CAE::SimSolution * solution )

Creates a solution result object given a NXOpen::CAE::SimSolution It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

solution solution

NXOpen::Fields::FieldTable* NXOpen::CAE::ResultManager::CreateTableFieldFromProbe	(	const NXString &	fieldName,
		const std::vector< NXOpen::Fields::FieldVariable * > &	indepVarArray,
		const std::vector< NXOpen::Fields::FieldVariable * > &	depVarArray,
		NXOpen::CAE::ResultProbe *	resultProbe,
		bool	createTableOfFields
	)

Creates a field from the lists of independent, dependent variables along with a given Result Probe.

Returns: field
Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

fieldName	field name NOTE: The full Unicode character set is not supported for this parameter.
indepVarArray	independent variables to be associated with the table field
depVarArray	dependent variables to be associated with the table field
resultProbe	result probe
createTableOfFields	When output field is both time/frequency and space varying, it is possble to create a table of fields

NXOpen::Fields::FieldTable* NXOpen::CAE::ResultManager::CreateTableFieldFromProbe	(	const char *	fieldName,
		const std::vector< NXOpen::Fields::FieldVariable * > &	indepVarArray,
		const std::vector< NXOpen::Fields::FieldVariable * > &	depVarArray,
		NXOpen::CAE::ResultProbe *	resultProbe,
		bool	createTableOfFields
	)

Creates a field from the lists of independent, dependent variables along with a given Result Probe.

Returns: field
Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

fieldName	field name NOTE: The full Unicode character set is not supported for this parameter.
indepVarArray	independent variables to be associated with the table field
depVarArray	dependent variables to be associated with the table field
resultProbe	result probe
createTableOfFields	When output field is both time/frequency and space varying, it is possble to create a table of fields

NXOpen::CAE::SolutionResult* NXOpen::CAE::ResultManager::CreateTbsOptimizationSolutionResult ( NXOpen::CAE::Optimization::TBSOptimizationSolution * tbsOptimizationSolution )

Creates a solution result object given a NXOpen::CAE::Optimization::TBSOptimizationSolution It is user's responsibility to destroy the result object once done using NXOpen::CAE::ResultManager::DeleteResult , in order to free up system resources.

Returns: Created in NX8.0.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

tbsOptimizationSolution tbsoptimizationsolution

NXOpen::CAE::TransientResultsReductionBuilder* NXOpen::CAE::ResultManager::CreateTransientResultsReductionBuilder ( )

Creates a transient results reduction builder.

It is user's responsibility to destroy the builder object once done

Returns: Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

void NXOpen::CAE::ResultManager::DeleteClippingParameters ( NXOpen::CAE::ClippingParameters * result )

Delete a NXOpen::CAE::ClippingParameters object.

Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result result

void NXOpen::CAE::ResultManager::DeleteCrossSectionParameters ( NXOpen::CAE::CrossSectionParameters * crossSection )

Delete a NXOpen::CAE::CrossSectionParameters object.

Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

crossSection cross section

void NXOpen::CAE::ResultManager::DeleteDeformationParameters ( NXOpen::CAE::DeformationParameters * result )

Delete a NXOpen::CAE::DeformationParameters object.

Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result result

void NXOpen::CAE::ResultManager::DeleteFreeBodyResultsBuilder ( NXOpen::CAE::FreeBodyResultsBuilder * builder )

Delete a NXOpen::CAE::FreeBodyResultsBuilder object.

Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

builder builder

void NXOpen::CAE::ResultManager::DeletePostJtBuilder ( NXOpen::CAE::PostJtExportBuilder * builder )

Delete a NXOpen::CAE::PostJtExportBuilder object.

Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

builder builder

void NXOpen::CAE::ResultManager::DeleteResult ( NXOpen::CAE::Result * result )

Delete a NXOpen::CAE::Result object.

If a NXOpen::CAE::ResultAccess object referencing it, that will also be deleted
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result result

void NXOpen::CAE::ResultManager::DeleteResultAccess ( NXOpen::CAE::ResultAccess * result )

Delete a NXOpen::CAE::ResultAccess object.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result result

void NXOpen::CAE::ResultManager::DeleteResultParameters ( NXOpen::CAE::ResultParameters * result )

Delete a NXOpen::CAE::ResultParameters object.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result result

void NXOpen::CAE::ResultManager::DeleteResultParametersWithProbe ( NXOpen::CAE::ResultParametersWithProbe * result )

Delete a NXOpen::CAE::ResultParametersWithProbe object.

Created in NX10.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

result result

NXOpen::TaggedObject* NXOpen::CAE::ResultManager::FindObject ( const NXString & journalIdentifier )

Returns a NXOpen::CAE::Result.

Returns: Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

journalIdentifier Journal identifier of the object

NXOpen::TaggedObject* NXOpen::CAE::ResultManager::FindObject ( const char * journalIdentifier )

Returns a NXOpen::CAE::Result.

Returns: Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

journalIdentifier Journal identifier of the object

tag_t NXOpen::CAE::ResultManager::Tag ( ) const

Returns the tag of this object.

The documentation for this class was generated from the following file:

CAE_ResultManager.hxx

Public Member Functions

Detailed Description

Member Function Documentation