Represents a PlanarMilling Builder More...

Inheritance diagram for NXOpen.CAM.PlanarMillingBuilder:

Public Member Functions
unsafe void	SetDrivePointSpecified (bool drivePointSpecified)
	The drive point specified flag More...

Properties
unsafe NXOpen.CAM.BoundaryPlanarMill	BlankBoundary `[get]`
	Returns the blank boundary More...

unsafe NXOpen.CAM.BoundaryPlanarMill	CheckBoundary `[get]`
	Returns the check boundary More...

unsafe NXOpen.CAM.CutLevelPlanar	CutLevel `[get]`
	Returns the Planar Mill Cut Level builder More...

unsafe int	DrivePoint `[get, set]`
	Returns or sets the drive point More...

unsafe NXOpen.CAM.MultiplePassesBuilder	MultiplePasses `[get]`
	Returns the Multiple Passes builder More...

unsafe NXOpen.CAM.BoundaryPlanarMill	PartBoundary `[get]`
	Returns the part boundary More...

unsafe bool	Save2dIpw `[get, set]`
	Returns or sets the Save 2D In-Process Workpiece More...

unsafe NXOpen.CAM.BoundaryPlanarMill	TrimBoundary `[get]`
	Returns the trim boundary More...

unsafe NXOpen.CAM.Geometry	WallGeometry `[get]`
	Returns the wall geometry builder More...

unsafe double	ZdepthOffset `[get, set]`
	Returns or sets the Z-Depth Offset More...

Properties inherited from NXOpen.CAM.PlanarOperationBuilder
unsafe int	AdditionalPasses `[get, set]`
	Returns or sets the Boundary Additional Passes More...

unsafe NXOpen.CAM.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes	AutomaticPartBoundaryMethod `[get, set]`
	Returns or sets the Automatic Part Boundary Method More...

unsafe NXOpen.CAM.AvoidanceMethodsBuilder	AvoidanceMethods `[get]`
	Returns the avoidance methods More...

unsafe NXOpen.CAM.StepoverBuilder	BndStepover `[get]`
	Returns the boundary stepover builder More...

unsafe NXOpen.CAM.Geometry	CheckGeometry `[get]`
	Returns the check geometry builder More...

unsafe bool	CornerLoops `[get, set]`
	Returns or sets the corner loops value More...

unsafe NXOpen.CAM.Geometry	CutAreaGeometry `[get]`
	Returns the cut area geometry builder More...

unsafe NXOpen.CAM.CutPatternBuilder	CutPattern `[get]`
	Returns the cut pattern builder More...

unsafe bool	DeferCuttingStatus `[get, set]`
	Returns or sets the defer cutting status value More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	DepthPerCut `[get]`
	Returns the depth per cut builder (inheritable double) More...

unsafe bool	IslandCleanup `[get, set]`
	Returns or sets the island cleanup status More...

unsafe NXOpen.CAM.NcmPlanarBuilder	NonCuttingBuilder `[get]`
	Returns the non-cutting moves builder More...

unsafe NXOpen.CAM.Geometry	PartGeometry `[get]`
	Returns the part geometry builder More...

unsafe NXOpen.CAM.ToolAxisFixed	ToolAxisFix `[get]`
	Returns the pmop tool axis ci builder More...

unsafe bool	ToolMinimumLengthUsage `[get, set]`
	Returns or sets the tool minimum length usage More...

Properties inherited from NXOpen.CAM.MillOperationBuilder
unsafe NXOpen.CAM.MillCutParameters	CutParameters `[get]`
	Returns the cut parameter object More...

unsafe NXOpen.CAM.FeedsBuilder	FeedsBuilder `[get]`
	Returns the feeds and speeds builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	MinCutLength `[get]`
	Returns the min cut length builder (tool dependent double) More...

unsafe NXOpen.CAM.ArcOutputTypeCiBuilder	MotionOutput `[get]`
	Returns the motion output builder More...

unsafe NXOpen.CAM.Tool	ReferenceTool `[get, set]`
	Returns or sets the reference tool object More...

unsafe NXOpen.CAM.MillOperationBuilder.WallCleanupTypes	WallCleanupType `[get, set]`
	Returns or sets the wall cleanup mode More...

Properties inherited from NXOpen.CAM.OperationBuilder
unsafe string	ChannelName `[get, set]`
	Returns or sets the channel's name More...

unsafe string	Description `[get, set]`
	Returns or sets the description More...

unsafe NXOpen.CAM.PostEventsCiBuilder	EndOfPath `[get]`
	Returns the end event builder More...

unsafe NXOpen.CAM.UdeSet	EndUdeSet `[get]`
	Returns the end ude set More...

unsafe NXOpen.CAM.GeometryCiBuilder	Geometry `[get]`
	Returns the geometry builder More...

unsafe bool	GougeChecking `[get, set]`
	Returns or sets the gouge checking flag More...

unsafe NXOpen.CAM.OperationBuilder.HoleAxisTypes	HoleAxisType `[get, set]`
	Returns or sets the Hole Axis Type More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	HoleDepth `[get]`
	Returns the max depth distance builder More...

unsafe NXOpen.CAM.OperationBuilder.HoleDepthTypes	HoleDepthType `[get, set]`
	Returns or sets the Hole Depth Type More...

unsafe NXOpen.CAM.LayoutCiBuilder	LayoutAndLayer `[get]`
	Returns the Layer and Layout More...

unsafe NXOpen.CAM.ArcOutputTypeCiBuilder	MotionOutputBuilder `[get]`
	Returns the motion output builder More...

unsafe NXOpen.CAM.Notes	Notes `[get]`
	Returns the notes builder More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationBasedOnTypes	OptimizationBasedOn `[get, set]`
	Returns or sets the optimization based on in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationDistanceTypes	OptimizationDistanceMethod `[get, set]`
	Returns or sets the optimization distance method in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationLevelTypes	OptimizationLevel `[get, set]`
	Returns or sets the optimization level in operation More...

unsafe NXOpen.CAM.OperationDisplayOptionsBuilder	PathDisplayOptions `[get]`
	Returns the path display options builder More...

unsafe string	PostToolPathExit `[get, set]`
	Returns or sets the environment variable that points to the post tool path generation library which has the exit More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistance `[get]`
	Returns the Retract Distance builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistanceOnToolAxisChange `[get]`
	Returns the Retract Distance on Tool Axis Change builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SafeClearance `[get]`
	Returns the safe clearance builder More...

unsafe bool	SelectToolFlag `[get, set]`
	Returns or sets the user selected tool More...

unsafe NXOpen.CAM.PostEventsCiBuilder	StartOfPath `[get]`
	Returns the start event builder More...

unsafe NXOpen.CAM.UdeSet	StartUdeSet `[get]`
	Returns the start ude set More...

unsafe NXOpen.CAM.ToolChangeCiBuilder	ToolChangeSetting `[get]`
	Returns the tool change builder More...

unsafe NXOpen.CAM.ToolPathEditorBuilder	ToolPathEditor `[get]`
	Returns the Tool Path Editor Builder More...

unsafe NXOpen.CAM.ToolPathSplitParametersBuilder	ToolPathSplitParametersBuilder `[get]`
	Returns the tool path split Parameters More...

Properties inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.CAM.Ude	CycleEvent `[get]`
	Returns the cycle event More...

unsafe NXOpen.CAM.Cycle	CycleTable `[get]`
	Returns the cycle More...

unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes	OptimizationMethod `[get, set]`
	Returns or sets the optim method More...

unsafe NXOpen.CAM.NCGroup	TargetPocket `[get, set]`
	Returns or sets the target pocket More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Types inherited from NXOpen.CAM.PlanarOperationBuilder
enum	AutomaticPartBoundaryMethodTypes { FollowWallBottom, FollowWallTop }
	Available types for automatic part boundary method in planar mill operation More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a PlanarMilling Builder

To create a new instance of this class, use NXOpen.CAM.OperationCollection.CreatePlanarMillingBuilder

Created in NX5.0.0

Member Function Documentation

unsafe void NXOpen.CAM.PlanarMillingBuilder.SetDrivePointSpecified ( bool drivePointSpecified )

inline

The drive point specified flag

Created in NX9.0.0

License requirements: None.

Parameters

drivePointSpecified if specify drive point

Property Documentation

unsafe NXOpen.CAM.BoundaryPlanarMill NXOpen.CAM.PlanarMillingBuilder.BlankBoundary

get

Returns the blank boundary

Created in NX11.0.1

License requirements: None.

unsafe NXOpen.CAM.BoundaryPlanarMill NXOpen.CAM.PlanarMillingBuilder.CheckBoundary

get

Returns the check boundary

Created in NX11.0.1

License requirements: None.

unsafe NXOpen.CAM.CutLevelPlanar NXOpen.CAM.PlanarMillingBuilder.CutLevel

get

Returns the Planar Mill Cut Level builder

Created in NX7.5.0

License requirements: None.

unsafe int NXOpen.CAM.PlanarMillingBuilder.DrivePoint

getset

Returns or sets the drive point

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.MultiplePassesBuilder NXOpen.CAM.PlanarMillingBuilder.MultiplePasses

get

Returns the Multiple Passes builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.BoundaryPlanarMill NXOpen.CAM.PlanarMillingBuilder.PartBoundary

get

Returns the part boundary

Created in NX11.0.1

License requirements: None.

unsafe bool NXOpen.CAM.PlanarMillingBuilder.Save2dIpw

getset

Returns or sets the Save 2D In-Process Workpiece

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.BoundaryPlanarMill NXOpen.CAM.PlanarMillingBuilder.TrimBoundary

get

Returns the trim boundary

Created in NX11.0.1

License requirements: None.

unsafe NXOpen.CAM.Geometry NXOpen.CAM.PlanarMillingBuilder.WallGeometry

get

Returns the wall geometry builder

Created in NX8.0.0

License requirements: None.

unsafe double NXOpen.CAM.PlanarMillingBuilder.ZdepthOffset

getset

Returns or sets the Z-Depth Offset

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_PlanarMillingBuilder.cs

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Function Documentation

Property Documentation