Represents a feeds Builder More...

Inheritance diagram for NXOpen.CAM.FeedsBuilder:

Public Types
enum	RecalcuateBasedOn { SurfaceSpeed, SpindleSpeed, FeedPerTooth, CutFeedRate }
	The recalculation based on attribute More...

Public Member Functions
unsafe void	RecalculateData (NXOpen.CAM.FeedsBuilder.RecalcuateBasedOn type)
	Recalculate speeds and feeds More...

unsafe void	SetMachiningData ()
	Set machining data More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.CAM.InheritableDoubleBuilder	CutGasPressure `[get]`
	Returns the Cut Gas Pressure More...

unsafe NXOpen.CAM.InheritableIntBuilder	CutGasType `[get]`
	Returns the Cut Gas Type More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CutLaserDelay `[get]`
	Returns the Laser Cut Delay More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CutLaserFrequency `[get]`
	Returns the Laser Cut Frequency More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CutLaserPower `[get]`
	Returns the Laser Cut Power More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedApproachBuilder `[get]`
	Returns the feed_approach builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedCrossoverBuilder `[get]`
	Returns the feed_crossover builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedCutBuilder `[get]`
	Returns the feed_cut builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedDepartureBuilder `[get]`
	Returns the feed_departure builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedEngageBuilder `[get]`
	Returns the feed_engage builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedFirstCutBuilder `[get]`
	Returns the feed_first_cut builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedLastCutBuilder `[get]`
	Returns the feed_last_cut builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	FeedPerToothBuilder `[get]`
	Returns the feed_per_tooth builder (inheritable Double) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedRapidBuilder `[get]`
	Returns the feed_rapid builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedModeBuilder	FeedRapidOutput `[get]`
	Returns the feed rapid output builder (inheritable Enum) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedRetractBuilder `[get]`
	Returns the feed_retract builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedReturnBuilder `[get]`
	Returns the feed_return builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedSideCutBuilder `[get]`
	Returns the feed_side_cut builder (inheritable Feed) More...

unsafe NXOpen.CAM.FeedsOptimizationData	FeedsOptimizationData `[get]`
	Returns the feeds optimize data More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedStepoverBuilder `[get]`
	Returns the feed_stepover builder (inheritable Feed) More...

unsafe NXOpen.CAM.InheritableFeedBuilder	FeedTraversalBuilder `[get]`
	Returns the feed_traversal builder (inheritable Feed) More...

unsafe bool	OptimizeFeedRateWhenGenerating `[get, set]`
	Returns or sets the optimize feed rate when generating More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PierceGasPressure `[get]`
	Returns the Pierce Gas Pressure More...

unsafe NXOpen.CAM.InheritableIntBuilder	PierceGasType `[get]`
	Returns the Pierce Gas Type More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PierceLaserDelay `[get]`
	Returns the Laser Pierce Delay More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PierceLaserFrequency `[get]`
	Returns the Laser Pierce Frequency More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PierceLaserPower `[get]`
	Returns the Laser Pierce Power More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractSpeed `[get]`
	Returns the Retract Speed More...

unsafe int	RetractSpeedToggle `[get, set]`
	Returns or sets the Retract Speed Toggle More...

unsafe NXOpen.CAM.InheritableIntBuilder	SpindleModeBuilder `[get]`
	Returns the spindle_mode builder (inheritable Int) More...

unsafe NXOpen.CAM.InheritableTextBuilder	SpindleRangeBuilder `[get]`
	Returns the spindle_range builder (inheritable Text) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SpindleRpmBuilder `[get]`
	Returns the spindle_rpm builder (inheritable Double) More...

unsafe int	SpindleRpmToggle `[get, set]`
	Returns or sets the spindle_rpm_toggle More...

unsafe NXOpen.CAM.InheritableTextBuilder	SpindleTextBuilder `[get]`
	Returns the spindle_text builder (inheritable Text) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SurfaceSpeedBuilder `[get]`
	Returns the surface_speed builder (inheritable Double) More...

unsafe NXOpen.CAM.InheritableIntBuilder	ToolDirectionBuilder `[get]`
	Returns the tool_direction builder (inheritable Int) More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a feeds Builder

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.CAM.FeedsBuilder.RecalcuateBasedOn

The recalculation based on attribute

Enumerator
SurfaceSpeed	surface speed
SpindleSpeed	spindle speed
FeedPerTooth	feed per tooth
CutFeedRate	cut feed rate

Member Function Documentation

unsafe void NXOpen.CAM.FeedsBuilder.RecalculateData ( NXOpen.CAM.FeedsBuilder.RecalcuateBasedOn type )

inline

Recalculate speeds and feeds

Created in NX8.0.0

License requirements: cam_base ("CAM BASE")

Parameters

type	the recalculation based on attribute

unsafe void NXOpen.CAM.FeedsBuilder.SetMachiningData ( )

inline

Set machining data

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Property Documentation

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.CutGasPressure

get

Returns the Cut Gas Pressure

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.FeedsBuilder.CutGasType

get

Returns the Cut Gas Type

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.CutLaserDelay

get

Returns the Laser Cut Delay

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.CutLaserFrequency

get

Returns the Laser Cut Frequency

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.CutLaserPower

get

Returns the Laser Cut Power

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedApproachBuilder

get

Returns the feed_approach builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedCrossoverBuilder

get

Returns the feed_crossover builder (inheritable Feed)

Created in NX10.0.3

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedCutBuilder

get

Returns the feed_cut builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedDepartureBuilder

get

Returns the feed_departure builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedEngageBuilder

get

Returns the feed_engage builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedFirstCutBuilder

get

Returns the feed_first_cut builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedLastCutBuilder

get

Returns the feed_last_cut builder (inheritable Feed)

Created in NX9.0.3

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.FeedPerToothBuilder

get

Returns the feed_per_tooth builder (inheritable Double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedRapidBuilder

get

Returns the feed_rapid builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedModeBuilder NXOpen.CAM.FeedsBuilder.FeedRapidOutput

get

Returns the feed rapid output builder (inheritable Enum)

Created in NX8.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedRetractBuilder

get

Returns the feed_retract builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedReturnBuilder

get

Returns the feed_return builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedSideCutBuilder

get

Returns the feed_side_cut builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.FeedsOptimizationData NXOpen.CAM.FeedsBuilder.FeedsOptimizationData

get

Returns the feeds optimize data

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedStepoverBuilder

get

Returns the feed_stepover builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableFeedBuilder NXOpen.CAM.FeedsBuilder.FeedTraversalBuilder

get

Returns the feed_traversal builder (inheritable Feed)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.FeedsBuilder.OptimizeFeedRateWhenGenerating

getset

Returns or sets the optimize feed rate when generating

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.PierceGasPressure

get

Returns the Pierce Gas Pressure

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.FeedsBuilder.PierceGasType

get

Returns the Pierce Gas Type

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.PierceLaserDelay

get

Returns the Laser Pierce Delay

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.PierceLaserFrequency

get

Returns the Laser Pierce Frequency

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.PierceLaserPower

get

Returns the Laser Pierce Power

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.RetractSpeed

get

Returns the Retract Speed

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.FeedsBuilder.RetractSpeedToggle

getset

Returns or sets the Retract Speed Toggle

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.FeedsBuilder.SpindleModeBuilder

get

Returns the spindle_mode builder (inheritable Int)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableTextBuilder NXOpen.CAM.FeedsBuilder.SpindleRangeBuilder

get

Returns the spindle_range builder (inheritable Text)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.SpindleRpmBuilder

get

Returns the spindle_rpm builder (inheritable Double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.FeedsBuilder.SpindleRpmToggle

getset

Returns or sets the spindle_rpm_toggle

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableTextBuilder NXOpen.CAM.FeedsBuilder.SpindleTextBuilder

get

Returns the spindle_text builder (inheritable Text)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeedsBuilder.SurfaceSpeedBuilder

get

Returns the surface_speed builder (inheritable Double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableIntBuilder NXOpen.CAM.FeedsBuilder.ToolDirectionBuilder

get

Returns the tool_direction builder (inheritable Int)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_FeedsBuilder.cs

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation