Represents a PlanarOperation Builder More...

Inheritance diagram for NXOpen.CAM.PlanarOperationBuilder:

Public Types
enum	AutomaticPartBoundaryMethodTypes { FollowWallBottom, FollowWallTop }
	Available types for automatic part boundary method in planar mill operation More...

Public Types inherited from NXOpen.CAM.MillOperationBuilder
enum	WallCleanupTypes { None, AtStart, AtEnd, Automatic }
	the wall cleanup modes More...

Public Types inherited from NXOpen.CAM.OperationBuilder
enum	HoleAxisTypes { Vector, Rule, RuleIfNoVector }
	Available types for Hole Axis Type in feature milling and hole making More...

enum	HoleDepthTypes { Point, Rule }
	Available types for Hole Depth Type in feature milling and hole making More...

enum	OptimizationBasedOnTypes { Dist, Orient }
	Available types for optimization based on in operation More...

enum	OptimizationDistanceTypes { Direct, Transition }
	Available types for optimization distance method in operation More...

enum	OptimizationLevelTypes { Standard, Advanced }
	Available types for optimization level in operation More...

Public Types inherited from NXOpen.CAM.ParamBuilder
enum	OptimizationTypes { None, MinimizeTravel, Band }
	Available types for Optimization Method in operation More...

Properties
unsafe int	AdditionalPasses `[get, set]`
	Returns or sets the Boundary Additional Passes More...

unsafe NXOpen.CAM.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes	AutomaticPartBoundaryMethod `[get, set]`
	Returns or sets the Automatic Part Boundary Method More...

unsafe NXOpen.CAM.AvoidanceMethodsBuilder	AvoidanceMethods `[get]`
	Returns the avoidance methods More...

unsafe NXOpen.CAM.StepoverBuilder	BndStepover `[get]`
	Returns the boundary stepover builder More...

unsafe NXOpen.CAM.Geometry	CheckGeometry `[get]`
	Returns the check geometry builder More...

unsafe bool	CornerLoops `[get, set]`
	Returns or sets the corner loops value More...

unsafe NXOpen.CAM.Geometry	CutAreaGeometry `[get]`
	Returns the cut area geometry builder More...

unsafe NXOpen.CAM.CutPatternBuilder	CutPattern `[get]`
	Returns the cut pattern builder More...

unsafe bool	DeferCuttingStatus `[get, set]`
	Returns or sets the defer cutting status value More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	DepthPerCut `[get]`
	Returns the depth per cut builder (inheritable double) More...

unsafe bool	IslandCleanup `[get, set]`
	Returns or sets the island cleanup status More...

unsafe NXOpen.CAM.NcmPlanarBuilder	NonCuttingBuilder `[get]`
	Returns the non-cutting moves builder More...

unsafe NXOpen.CAM.Geometry	PartGeometry `[get]`
	Returns the part geometry builder More...

unsafe NXOpen.CAM.ToolAxisFixed	ToolAxisFix `[get]`
	Returns the pmop tool axis ci builder More...

unsafe bool	ToolMinimumLengthUsage `[get, set]`
	Returns or sets the tool minimum length usage More...

Properties inherited from NXOpen.CAM.MillOperationBuilder
unsafe NXOpen.CAM.MillCutParameters	CutParameters `[get]`
	Returns the cut parameter object More...

unsafe NXOpen.CAM.FeedsBuilder	FeedsBuilder `[get]`
	Returns the feeds and speeds builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	MinCutLength `[get]`
	Returns the min cut length builder (tool dependent double) More...

unsafe NXOpen.CAM.ArcOutputTypeCiBuilder	MotionOutput `[get]`
	Returns the motion output builder More...

unsafe NXOpen.CAM.Tool	ReferenceTool `[get, set]`
	Returns or sets the reference tool object More...

unsafe NXOpen.CAM.MillOperationBuilder.WallCleanupTypes	WallCleanupType `[get, set]`
	Returns or sets the wall cleanup mode More...

Properties inherited from NXOpen.CAM.OperationBuilder
unsafe string	ChannelName `[get, set]`
	Returns or sets the channel's name More...

unsafe string	Description `[get, set]`
	Returns or sets the description More...

unsafe NXOpen.CAM.PostEventsCiBuilder	EndOfPath `[get]`
	Returns the end event builder More...

unsafe NXOpen.CAM.UdeSet	EndUdeSet `[get]`
	Returns the end ude set More...

unsafe NXOpen.CAM.GeometryCiBuilder	Geometry `[get]`
	Returns the geometry builder More...

unsafe bool	GougeChecking `[get, set]`
	Returns or sets the gouge checking flag More...

unsafe NXOpen.CAM.OperationBuilder.HoleAxisTypes	HoleAxisType `[get, set]`
	Returns or sets the Hole Axis Type More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	HoleDepth `[get]`
	Returns the max depth distance builder More...

unsafe NXOpen.CAM.OperationBuilder.HoleDepthTypes	HoleDepthType `[get, set]`
	Returns or sets the Hole Depth Type More...

unsafe NXOpen.CAM.LayoutCiBuilder	LayoutAndLayer `[get]`
	Returns the Layer and Layout More...

unsafe NXOpen.CAM.ArcOutputTypeCiBuilder	MotionOutputBuilder `[get]`
	Returns the motion output builder More...

unsafe NXOpen.CAM.Notes	Notes `[get]`
	Returns the notes builder More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationBasedOnTypes	OptimizationBasedOn `[get, set]`
	Returns or sets the optimization based on in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationDistanceTypes	OptimizationDistanceMethod `[get, set]`
	Returns or sets the optimization distance method in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationLevelTypes	OptimizationLevel `[get, set]`
	Returns or sets the optimization level in operation More...

unsafe NXOpen.CAM.OperationDisplayOptionsBuilder	PathDisplayOptions `[get]`
	Returns the path display options builder More...

unsafe string	PostToolPathExit `[get, set]`
	Returns or sets the environment variable that points to the post tool path generation library which has the exit More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistance `[get]`
	Returns the Retract Distance builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistanceOnToolAxisChange `[get]`
	Returns the Retract Distance on Tool Axis Change builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SafeClearance `[get]`
	Returns the safe clearance builder More...

unsafe bool	SelectToolFlag `[get, set]`
	Returns or sets the user selected tool More...

unsafe NXOpen.CAM.PostEventsCiBuilder	StartOfPath `[get]`
	Returns the start event builder More...

unsafe NXOpen.CAM.UdeSet	StartUdeSet `[get]`
	Returns the start ude set More...

unsafe NXOpen.CAM.ToolChangeCiBuilder	ToolChangeSetting `[get]`
	Returns the tool change builder More...

unsafe NXOpen.CAM.ToolPathEditorBuilder	ToolPathEditor `[get]`
	Returns the Tool Path Editor Builder More...

unsafe NXOpen.CAM.ToolPathSplitParametersBuilder	ToolPathSplitParametersBuilder `[get]`
	Returns the tool path split Parameters More...

Properties inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.CAM.Ude	CycleEvent `[get]`
	Returns the cycle event More...

unsafe NXOpen.CAM.Cycle	CycleTable `[get]`
	Returns the cycle More...

unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes	OptimizationMethod `[get, set]`
	Returns or sets the optim method More...

unsafe NXOpen.CAM.NCGroup	TargetPocket `[get, set]`
	Returns or sets the target pocket More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.CAM.OperationBuilder
unsafe double[]	GetHoleAxisValues ()
	Get the Hole Axis values More...

unsafe void	SetHoleAxisValues (double[] holeAxis)
	Set the Hole Axis values More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a PlanarOperation Builder

This is an abstract class and cannot be instantiated.

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.CAM.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes

Available types for automatic part boundary method in planar mill operation

Enumerator
FollowWallBottom	Follow Bottom
FollowWallTop	Follow Top

Property Documentation

unsafe int NXOpen.CAM.PlanarOperationBuilder.AdditionalPasses

getset

Returns or sets the Boundary Additional Passes

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes NXOpen.CAM.PlanarOperationBuilder.AutomaticPartBoundaryMethod

getset

Returns or sets the Automatic Part Boundary Method

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.AvoidanceMethodsBuilder NXOpen.CAM.PlanarOperationBuilder.AvoidanceMethods

get

Returns the avoidance methods

Created in NX12.0.1

License requirements: None.

unsafe NXOpen.CAM.StepoverBuilder NXOpen.CAM.PlanarOperationBuilder.BndStepover

get

Returns the boundary stepover builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.Geometry NXOpen.CAM.PlanarOperationBuilder.CheckGeometry

get

Returns the check geometry builder

Created in NX8.0.0

License requirements: None.

unsafe bool NXOpen.CAM.PlanarOperationBuilder.CornerLoops

getset

Returns or sets the corner loops value

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Geometry NXOpen.CAM.PlanarOperationBuilder.CutAreaGeometry

get

Returns the cut area geometry builder

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.CutPatternBuilder NXOpen.CAM.PlanarOperationBuilder.CutPattern

get

Returns the cut pattern builder

Created in NX6.0.0

License requirements: None.

unsafe bool NXOpen.CAM.PlanarOperationBuilder.DeferCuttingStatus

getset

Returns or sets the defer cutting status value

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.PlanarOperationBuilder.DepthPerCut

get

Returns the depth per cut builder (inheritable double)

Created in NX5.0.0

License requirements: None.

unsafe bool NXOpen.CAM.PlanarOperationBuilder.IslandCleanup

getset

Returns or sets the island cleanup status

Created in NX12.0.0

License requirements to get this property: None.

License requirements to set this property: None.

unsafe NXOpen.CAM.NcmPlanarBuilder NXOpen.CAM.PlanarOperationBuilder.NonCuttingBuilder

get

Returns the non-cutting moves builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.Geometry NXOpen.CAM.PlanarOperationBuilder.PartGeometry

get

Returns the part geometry builder

Created in NX8.0.0

License requirements: None.

unsafe NXOpen.CAM.ToolAxisFixed NXOpen.CAM.PlanarOperationBuilder.ToolAxisFix

get

Returns the pmop tool axis ci builder

Created in NX7.5.0

License requirements: None.

unsafe bool NXOpen.CAM.PlanarOperationBuilder.ToolMinimumLengthUsage

getset

Returns or sets the tool minimum length usage

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_PlanarOperationBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation