Represents a NXOpen.CAM.NcmPlanarBuilder More...

Inheritance diagram for NXOpen.CAM.NcmPlanarBuilder:

Public Types
enum	CutcomTypes { None, AllFinishPasses, FinalFinishPass }
	Available types for cutter compensation in planar milling More...

enum	FinalRet { Inherit, Plunge, None }
	Available strategies for final retract in planar milling More...

enum	FinalTypes { Clearance, Distance, None, ShortestDistanceToClearance, CutPlaneToClearance }
	Available types for final clearance in planar milling More...

enum	InitialEng { Inherit, Lift, None }
	Available strategies for initial engage in planar milling More...

enum	InitialTypes { Clearance, Distance, None, BlankPlane, ShortestDistanceToClearance, CutPlaneToClearance }
	Available types for initial clearance in planar milling More...

enum	PredrillPointsOutputOptions { None, AllRegions, BottomRegions }
	Available options for output of pre-drill points in planar milling More...

enum	TransferBetweenLevelsTypes { PrevPlane, Direct, Clearance }
	Available types for transfer between levels in planar milling More...

enum	TransferBetweenRegionsTypes { Clearance, PrevPlane, Direct, LowestSafeZ, BlankPlane, ShortestToClearance, CutPlaneToClearance }
	Available types for transfer between regions in planar milling More...

enum	TransferWithinLevelsTypes { LowestSafeZ, PrevPlane, Direct, Clearance, BlankPlane, ShortestToClearance, CutPlaneToClearance, Smooth, DirectPreviousPlaneBackup, CutPlane }
	Available types for transfer within levels in planar milling More...

enum	TransferWithinLevelsWiths { UseEngret, FollowBoundary, LiftPlunge, None, Smooth }
	Available strategies for transfer within levels in planar milling More...

Public Types inherited from NXOpen.CAM.NcmSubopBuilder
enum	DefaultRegionStartTypes { MidPoint, Corner }
	Available types for default region start in subop milling More...

enum	TransferUsing { EngageRetract, FollowBoundary, LiftPlunge, None, Smooth }
	transfer using type for transfer within region More...

Public Member Functions
unsafe NXOpen.Point[]	GetPredrillPoints ()
	The pre-drill points More...

unsafe void	SetPredrillPoints (NXOpen.Point[] predrillPoints)
	The pre-drill points More...

Public Member Functions inherited from NXOpen.CAM.NcmSubopBuilder
unsafe void	GetRegionStartPoints (out NXOpen.Point[] regionStartPoints)
	Returns region start points More...

unsafe void	SetRegionStartPoints (NXOpen.Point[] regionStartPoints)
	Sets region start points More...

Public Member Functions inherited from NXOpen.CAM.BaseBuilder
unsafe NXOpen.TaggedObject	GetCustomizableItemBuilder (string name)
	Returns the customizable item builder for given customizable item name More...

unsafe string[]	GetCustomizableItemNames ()
	Returns the names for all customizable item ids More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe bool	ApplySafetyToDirect `[get, set]`
	Returns or sets the apply safety to direct value More...

unsafe NXOpen.CAM.NcmClearanceBuilder	ClearanceBuilder `[get]`
	Returns the clearance builder (inheritable tool dep) More...

unsafe bool	CollisionCheck `[get, set]`
	Returns or sets the collision check activation More...

unsafe double	CutcomMinimumAngle `[get, set]`
	Returns or sets the cutter compensation minimum angle More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	CutcomMinimumMoveBuilder `[get]`
	Returns the cutter compensation minimum move builder (inheritable tool dep) More...

unsafe bool	CutcomOutputContactPoint `[get, set]`
	Returns or sets the cutter compensation output contact point status More...

unsafe bool	CutcomOutputPlane `[get, set]`
	Returns or sets the cutter compensation output plane status More...

unsafe int	CutcomTrackingPointType `[get, set]`
	Returns or sets the cutter compensation tracking point selection More...

unsafe NXOpen.CAM.NcmPlanarBuilder.CutcomTypes	CutcomType `[get, set]`
	Returns or sets the cutter compensation type More...

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder	EngageClosedAreaBuilder `[get]`
	Returns the default engage closed area builder More...

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder	EngageInitialClosedBuilder `[get]`
	Returns the initial engage closed area builder More...

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder	EngageInitialOpenBuilder `[get]`
	Returns the initial engage open area builder More...

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder	EngageOpenAreaBuilder `[get]`
	Returns the default engage open area builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	FinalSafeDistanceBuilder `[get]`
	Returns the final safe distance builder (inheritable tool dep) More...

unsafe NXOpen.CAM.NcmPlanarBuilder.FinalTypes	FinalType `[get, set]`
	Returns or sets the final type More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	InitialSafeDistanceBuilder `[get]`
	Returns the initial safe distance builder (inheritable tool dep) More...

unsafe NXOpen.CAM.NcmPlanarBuilder.InitialTypes	InitialType `[get, set]`
	Returns or sets the initial type More...

unsafe bool	LimitEngRetToCutRegion `[get, set]`
	Returns or sets the flag to control limitation of engage and retract motions to cut regions More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	OverlapDistanceBuilder `[get]`
	Returns the start/drill points overlap distance builder (inheritable tool dep) More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	PredrillPointsEffectDistBuilder `[get]`
	Returns the pre-drill points effective distance builder (inheritable tool dep) More...

unsafe NXOpen.CAM.NcmPlanarBuilder.PredrillPointsOutputOptions	PredrillPointsOutput `[get, set]`
	Returns or sets the pre-drill points output option More...

unsafe bool	PredrillPointsUseEffectDist `[get, set]`
	Returns or sets the pre-drill points use effective distance More...

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder	RetractAreaBuilder `[get]`
	Returns the retract area builder More...

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder	RetractFinalBuilder `[get]`
	Returns the final retract builder More...

unsafe NXOpen.CAM.NcmSmoothingBuilder	SmoothingBuilder `[get]`
	Returns the smoothing builder More...

unsafe bool	SuppressCutcom `[get, set]`
	Returns or sets the suppress cutter compensation More...

unsafe NXOpen.CAM.NcmAvoidancePointBuilder	TransferAvoidanceFromBuilder `[get]`
	Returns the from point builder More...

unsafe NXOpen.CAM.NcmAvoidancePointBuilder	TransferAvoidanceGohomeBuilder `[get]`
	Returns the gohome point builder More...

unsafe NXOpen.CAM.NcmAvoidancePointBuilder	TransferAvoidanceReturnBuilder `[get]`
	Returns the return point builder More...

unsafe NXOpen.CAM.NcmAvoidancePointBuilder	TransferAvoidanceStartBuilder `[get]`
	Returns the start point builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	TransferBetweenLevelsSafeDistanceBuilder `[get]`
	Returns the transfer between levels safe distance builder (inheritable tool dep) More...

unsafe NXOpen.CAM.NcmPlanarBuilder.TransferBetweenLevelsTypes	TransferBetweenLevelsType `[get, set]`
	Returns or sets the transfer between levels type More...

unsafe NXOpen.CAM.NcmTransfer	TransferBetweenRegionsBuilder `[get]`
	Returns the Transfer Between Regions builder More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	TransferBetweenRegionsSafeDistanceBuilder `[get]`
	Returns the transfer between regions safe distance builder (inheritable tool dep) More...

unsafe NXOpen.CAM.NcmPlanarBuilder.TransferBetweenRegionsTypes	TransferBetweenRegionsType `[get, set]`
	Returns or sets the transfer between regions type More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	TransferWithinLevelsHeightBuilder `[get]`
	Returns the transfer within levels height builder (inheritable tool dep) More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	TransferWithinLevelsMaxFollowDistanceBuilder `[get]`
	Returns the transfer within levels max follow distance builder (inheritable tool dep) More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	TransferWithinLevelsSafeDistanceBuilder `[get]`
	Returns the transfer within levels safe distance builder (inheritable tool dep) More...

unsafe NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsTypes	TransferWithinLevelsType `[get, set]`
	Returns or sets the transfer within levels type More...

unsafe NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsWiths	TransferWithinLevelsWith `[get, set]`
	Returns or sets the transfer within levels strategy More...

Properties inherited from NXOpen.CAM.NcmSubopBuilder
unsafe NXOpen.CAM.NcmSubopBuilder.DefaultRegionStartTypes	DefaultRegionStartType `[get, set]`
	Returns or sets the region start type More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	StartPointsEffectDistBuilder `[get]`
	Returns the region start points effective distance builder (inheritable tool dep) More...

unsafe bool	StartPointsUseEffectDist `[get, set]`
	Returns or sets the start points use effective distance More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a NXOpen.CAM.NcmPlanarBuilder

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.CAM.NcmPlanarBuilder.CutcomTypes

Available types for cutter compensation in planar milling

Enumerator
None	cutter compensation off
AllFinishPasses	cutter compensation on all finish passes
FinalFinishPass	cutter compensation on last finish pass

enum NXOpen.CAM.NcmPlanarBuilder.FinalRet

Available strategies for final retract in planar milling

Enumerator
Inherit	Use retract defs
Plunge	plunge
None	none

enum NXOpen.CAM.NcmPlanarBuilder.FinalTypes

Available types for final clearance in planar milling

Enumerator
Clearance	tool axis clearance
Distance	distance
None	none
ShortestDistanceToClearance	shortest distance to clearance
CutPlaneToClearance	cut plane to clearance

enum NXOpen.CAM.NcmPlanarBuilder.InitialEng

Available strategies for initial engage in planar milling

Enumerator
Inherit	Use engage defs
Lift	lift
None	none

enum NXOpen.CAM.NcmPlanarBuilder.InitialTypes

Available types for initial clearance in planar milling

Enumerator
Clearance	tool axis to clearance
Distance	distance
None	none
BlankPlane	blank plane
ShortestDistanceToClearance	shortest distance to clearance
CutPlaneToClearance	cut plane to clearance

enum NXOpen.CAM.NcmPlanarBuilder.PredrillPointsOutputOptions

Available options for output of pre-drill points in planar milling

Enumerator
None	No Pre-Drill points
AllRegions	Pre-Drill Points for all regions
BottomRegions	Pre-Drill Points for bottom regions only

enum NXOpen.CAM.NcmPlanarBuilder.TransferBetweenLevelsTypes

Available types for transfer between levels in planar milling

Enumerator
PrevPlane	previous plane
Direct	direct
Clearance	clearance

enum NXOpen.CAM.NcmPlanarBuilder.TransferBetweenRegionsTypes

Available types for transfer between regions in planar milling

Enumerator
Clearance	tool axis to clearance
PrevPlane	previous plane
Direct	direct
LowestSafeZ	lowest safe z
BlankPlane	Blank Plane
ShortestToClearance	shortest to clearance
CutPlaneToClearance	cut plane to clearance

enum NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsTypes

Available types for transfer within levels in planar milling

Enumerator
LowestSafeZ	lowest Safe Z
PrevPlane	previous plane
Direct	direct
Clearance	tool axis to clearance
BlankPlane	Blank Plane
ShortestToClearance	shortest to clearance
CutPlaneToClearance	cut plane to clearance
Smooth	smooth
DirectPreviousPlaneBackup	direct/previous plane backup
CutPlane	cut plane

enum NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsWiths

Available strategies for transfer within levels in planar milling

Enumerator
UseEngret	Use engage and retract defs
FollowBoundary	follow boundary (for future use)
LiftPlunge	lift and plunge
None	none
Smooth	smooth

Member Function Documentation

unsafe NXOpen.Point [] NXOpen.CAM.NcmPlanarBuilder.GetPredrillPoints ( )

inline

The pre-drill points

Created in NX5.0.0

License requirements: None.

Returns: Array of points

unsafe void NXOpen.CAM.NcmPlanarBuilder.SetPredrillPoints ( NXOpen.Point[] predrillPoints )

inline

The pre-drill points

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

Parameters

predrillPoints Array of points

Property Documentation

unsafe bool NXOpen.CAM.NcmPlanarBuilder.ApplySafetyToDirect

getset

Returns or sets the apply safety to direct value

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmClearanceBuilder NXOpen.CAM.NcmPlanarBuilder.ClearanceBuilder

get

Returns the clearance builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe bool NXOpen.CAM.NcmPlanarBuilder.CollisionCheck

getset

Returns or sets the collision check activation

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.NcmPlanarBuilder.CutcomMinimumAngle

getset

Returns or sets the cutter compensation minimum angle

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.CutcomMinimumMoveBuilder

get

Returns the cutter compensation minimum move builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe bool NXOpen.CAM.NcmPlanarBuilder.CutcomOutputContactPoint

getset

Returns or sets the cutter compensation output contact point status

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.NcmPlanarBuilder.CutcomOutputPlane

getset

Returns or sets the cutter compensation output plane status

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.NcmPlanarBuilder.CutcomTrackingPointType

getset

Returns or sets the cutter compensation tracking point selection

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmPlanarBuilder.CutcomTypes NXOpen.CAM.NcmPlanarBuilder.CutcomType

getset

Returns or sets the cutter compensation type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder NXOpen.CAM.NcmPlanarBuilder.EngageClosedAreaBuilder

get

Returns the default engage closed area builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder NXOpen.CAM.NcmPlanarBuilder.EngageInitialClosedBuilder

get

Returns the initial engage closed area builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder NXOpen.CAM.NcmPlanarBuilder.EngageInitialOpenBuilder

get

Returns the initial engage open area builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder NXOpen.CAM.NcmPlanarBuilder.EngageOpenAreaBuilder

get

Returns the default engage open area builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.FinalSafeDistanceBuilder

get

Returns the final safe distance builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarBuilder.FinalTypes NXOpen.CAM.NcmPlanarBuilder.FinalType

getset

Returns or sets the final type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.InitialSafeDistanceBuilder

get

Returns the initial safe distance builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarBuilder.InitialTypes NXOpen.CAM.NcmPlanarBuilder.InitialType

getset

Returns or sets the initial type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.NcmPlanarBuilder.LimitEngRetToCutRegion

getset

Returns or sets the flag to control limitation of engage and retract motions to cut regions

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.OverlapDistanceBuilder

get

Returns the start/drill points overlap distance builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.PredrillPointsEffectDistBuilder

get

Returns the pre-drill points effective distance builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarBuilder.PredrillPointsOutputOptions NXOpen.CAM.NcmPlanarBuilder.PredrillPointsOutput

getset

Returns or sets the pre-drill points output option

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.NcmPlanarBuilder.PredrillPointsUseEffectDist

getset

Returns or sets the pre-drill points use effective distance

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder NXOpen.CAM.NcmPlanarBuilder.RetractAreaBuilder

get

Returns the retract area builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarEngRetBuilder NXOpen.CAM.NcmPlanarBuilder.RetractFinalBuilder

get

Returns the final retract builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmSmoothingBuilder NXOpen.CAM.NcmPlanarBuilder.SmoothingBuilder

get

Returns the smoothing builder

Created in NX9.0.2

License requirements: None.

unsafe bool NXOpen.CAM.NcmPlanarBuilder.SuppressCutcom

getset

Returns or sets the suppress cutter compensation

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmAvoidancePointBuilder NXOpen.CAM.NcmPlanarBuilder.TransferAvoidanceFromBuilder

get

Returns the from point builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmAvoidancePointBuilder NXOpen.CAM.NcmPlanarBuilder.TransferAvoidanceGohomeBuilder

get

Returns the gohome point builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmAvoidancePointBuilder NXOpen.CAM.NcmPlanarBuilder.TransferAvoidanceReturnBuilder

get

Returns the return point builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmAvoidancePointBuilder NXOpen.CAM.NcmPlanarBuilder.TransferAvoidanceStartBuilder

get

Returns the start point builder

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.TransferBetweenLevelsSafeDistanceBuilder

get

Returns the transfer between levels safe distance builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarBuilder.TransferBetweenLevelsTypes NXOpen.CAM.NcmPlanarBuilder.TransferBetweenLevelsType

getset

Returns or sets the transfer between levels type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmTransfer NXOpen.CAM.NcmPlanarBuilder.TransferBetweenRegionsBuilder

get

Returns the Transfer Between Regions builder

Created in NX9.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.TransferBetweenRegionsSafeDistanceBuilder

get

Returns the transfer between regions safe distance builder (inheritable tool dep)

Created in NX5.0.0

Deprecated in NX9.0.0. Please use NXOpen.CAM.NcmTransfer.SafeDistanceBuilder instead.

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarBuilder.TransferBetweenRegionsTypes NXOpen.CAM.NcmPlanarBuilder.TransferBetweenRegionsType

getset

Returns or sets the transfer between regions type

Created in NX5.0.0

Deprecated in NX9.0.0. Please use NXOpen.CAM.NcmTransfer.Type instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsHeightBuilder

get

Returns the transfer within levels height builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsMaxFollowDistanceBuilder

get

Returns the transfer within levels max follow distance builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.InheritableToolDepBuilder NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsSafeDistanceBuilder

get

Returns the transfer within levels safe distance builder (inheritable tool dep)

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsTypes NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsType

getset

Returns or sets the transfer within levels type

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsWiths NXOpen.CAM.NcmPlanarBuilder.TransferWithinLevelsWith

getset

Returns or sets the transfer within levels strategy

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_NcmPlanarBuilder.cs

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation