Provides method for creating builder for node element operation commands in a fem part More...

Inheritance diagram for NXOpen.CAE.NodeElementManager:

Public Member Functions
unsafe NXOpen.CAE.AcousticChamberMeshBuilder	CreateAcousticChamberMeshBuilder (NXOpen.CAE.RecipeAcousticChamberMesh mesh)
	Creates a NXOpen.CAE.AcousticChamberMeshBuilder More...

unsafe NXOpen.CAE.AttachElementsBuilder	CreateAttachElementsBuilder ()
	Creates a builder for attach elements command More...

unsafe NXOpen.CAE.AutomaticMorphBuilder	CreateAutomaticMorphBuilder ()
	Creates a builder for Automatic Morphing command More...

unsafe NXOpen.CAE.BeamEADBuilder	CreateBeamEadBuilder ()
	Creates a builder for the Beam EAD block. More...

unsafe NXOpen.CAE.BeamEADBuilder	CreateBeamEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Beam EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.BushingEADBuilder	CreateBushingEadBuilder ()
	Creates a builder for the Bushing EAD block. More...

unsafe NXOpen.CAE.BushingEADBuilder	CreateBushingEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Bushing EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.CombineTrisBuilder	CreateCombineTrisBuilder ()
	Creates a builder for Combine Tris. More...

unsafe NXOpen.CAE.ConvexMeshBuilder	CreateConvexMeshBuilder (NXOpen.CAE.RecipeConvexMesh mesh)
	Creates a NXOpen.CAE.ConvexMeshBuilder More...

unsafe NXOpen.CAE.ConvexMeshBuilder	CreateConvexMeshBuilder ()
	Creates a NXOpen.CAE.ConvexMeshBuilder More...

unsafe NXOpen.CAE.DamperEADBuilder	CreateDamperEadBuilder ()
	Creates a builder for the Damper EAD block. More...

unsafe NXOpen.CAE.DamperEADBuilder	CreateDamperEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Damper EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.ElementDeleteBuilder	CreateDeleteElementBuilder ()
	Creates a builder for element delete command More...

unsafe NXOpen.CAE.DestinationCollectorBuilder	CreateDestinationCollectorBuilder (bool isInEdit, NXOpen.CAE.ElementTypeBuilder elementTypeBuilder)
	Creates a builder for the Destination Collector Specification block. More...

unsafe NXOpen.CAE.ElementConnectivityBuilder	CreateElementConnectivityBuilder ()
	Creates a builder for element connectivity command More...

unsafe NXOpen.CAE.ElementCreateBuilder	CreateElementCreateBuilder ()
	Creates a builder for element create command More...

unsafe NXOpen.CAE.ElementDetachBuilder	CreateElementDetachBuilder ()
	Creates a builder for element detach command More...

unsafe NXOpen.CAE.ElementExtractBuilder	CreateElementExtractBuilder ()
	Creates a builder for Element Extract. More...

unsafe NXOpen.CAE.ElementExtrudeBuilder	CreateElementExtrudeBuilder ()
	Creates a builder for element extrude command More...

unsafe NXOpen.CAE.ElementModifyLabelBuilder	CreateElementModifyLabelBuilder ()
	Creates a builder for element modify label command More...

unsafe NXOpen.CAE.ElementModifyOrderBuilder	CreateElementModifyOrderBuilder ()
	Creates a builder for element modify order command More...

unsafe NXOpen.CAE.ElementModifyTypeBuilder	CreateElementModifyTypeBuilder ()
	Creates a builder for element modify type command More...

unsafe NXOpen.CAE.ElementProjectBuilder	CreateElementProjectBuilder ()
	Creates a builder for element project command More...

unsafe NXOpen.CAE.ElementReflectBuilder	CreateElementReflectBuilder ()
	Creates a builder for element reflect command More...

unsafe NXOpen.CAE.ElementRevolveBuilder	CreateElementRevolveBuilder ()
	Creates a builder for element revolve command More...

unsafe NXOpen.CAE.ElementRotateBuilder	CreateElementRotateBuilder ()
	Creates a builder for element translate command More...

unsafe NXOpen.CAE.ElementSplitBuilder	CreateElementSplitBuilder ()
	Creates a builder for element split command More...

unsafe NXOpen.CAE.ElementTranslateBuilder	CreateElementTranslateBuilder ()
	Creates a builder for element translate command More...

unsafe NXOpen.CAE.ElementTypeBuilder	CreateElementTypeBuilder ()
	Creates a builder for the Element Type Specification block. More...

unsafe NXOpen.CAE.GapEADBuilder	CreateGapEadBuilder ()
	Creates a builder for the Gap EAD block. More...

unsafe NXOpen.CAE.GapEADBuilder	CreateGapEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Gap EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.GlobalAeroCsysBuilder	CreateGlobalAeroCsysBuilder ()
	Creates a builder for global aero csys command More...

unsafe NXOpen.CAE.InterpolationEADBuilder	CreateInterpolationEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Interpolation EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.LumpedMassEADBuilder	CreateLumpedMassEadBuilder ()
	Creates a builder for the Lumped Mass EAD block. More...

unsafe NXOpen.CAE.LumpedMassEADBuilder	CreateLumpedMassEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the LumpedMass EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.ManualMorphBuilder	CreateManualMorphBuilder ()
	Creates a builder for Manual Morphing command More...

unsafe NXOpen.CAE.ManualNodeAssociationBuilder	CreateManualNodeAssociationBuilder ()
	Creates a builder for manual node association command More...

unsafe NXOpen.CAE.MeshFromBoundaryBuilder	CreateMeshFromBoundaryBuilder ()
	Creates Mesh From Boundary builder. More...

unsafe NXOpen.CAE.MeshFromPointCloudBuilder	CreateMeshFromPointCloudBuilder ()
	Creates a builder for mesh from point cloud command More...

unsafe NXOpen.CAE.MorphRevolvedMeshBuilder	CreateMorphRevolvedMeshBuilder ()
	Creates a NXOpen.CAE.MorphRevolvedMeshBuilder More...

unsafe NXOpen.CAE.MoveNodeBuilder	CreateMoveNodeBuilder ()
	Creates a builder for move node command More...

unsafe NXOpen.CAE.MultipleElementCreateBuilder	CreateMultipleElementCreateBuilder (int estimatedNumberOfElements)
	Creates a builder for the creation of multiple elements. More...

unsafe NXOpen.CAE.MultipleNodeCreateBuilder	CreateMultipleNodeCreateBuilder (int estimatedNumberOfNodes)
	Creates a builder for the creation of multiple nodes. More...

unsafe NXOpen.CAE.NodeAlignBuilder	CreateNodeAlignBuilder ()
	Creates a builder for node align command More...

unsafe NXOpen.CAE.NodeAssociationBuilder	CreateNodeAssociationBuilder ()
	Creates a builder for node association command More...

unsafe NXOpen.CAE.NodeCreateBuilder	CreateNodeCreateBuilder ()
	Creates a builder for node create command More...

unsafe NXOpen.CAE.NodeDeleteBuilder	CreateNodeDeleteBuilder ()
	Creates a builder for node delete command More...

unsafe NXOpen.CAE.NodeDissociationBuilder	CreateNodeDissociationBuilder ()
	Creates a builder for node dissociation command More...

unsafe NXOpen.CAE.NodeModifyLabelBuilder	CreateNodeModifyLabelBuilder ()
	Creates a builder for node modify label command More...

unsafe NXOpen.CAE.NodeModifyLocationBuilder	CreateNodeModifyLocationBuilder ()
	Creates a builder for node modify location command More...

unsafe NXOpen.CAE.NodeProjectBuilder	CreateNodeProjectBuilder ()
	Creates a builder for node project command More...

unsafe NXOpen.CAE.NodeReflectBuilder	CreateNodeReflectBuilder ()
	Creates a builder for Node reflect command More...

unsafe NXOpen.CAE.NodeRotateBuilder	CreateNodeRotateBuilder ()
	Creates a builder for node rotate command More...

unsafe NXOpen.CAE.NodesBetweenNodesBuilder	CreateNodesBetweenNodesBuilder ()
	Creates a builder for node between nodes command More...

unsafe NXOpen.CAE.NodesOnCurveBuilder	CreateNodesOnCurveBuilder ()
	Creates a builder for nodes on curve command More...

unsafe NXOpen.CAE.NodesRepositionBuilder	CreateNodesRepositionBuilder ()
	Creates a builder for repositioning nodes, Use this command when you need to modify many nodes at one time. More...

unsafe NXOpen.CAE.NodeTranslateBuilder	CreateNodeTranslateBuilder ()
	Creates a builder for node translate command More...

unsafe NXOpen.CAE.OneDimensionalElementSplitBuilder	CreateOneDimensionalElementSplitBuilder ()
	Creates a builder for one dimensional element split command More...

unsafe NXOpen.CAE.OpenDuctMeshBuilder	CreateOpenDuctMeshBuilder (NXOpen.CAE.RecipeOpenDuctMesh mesh)
	Creates a NXOpen.CAE.OpenDuctMeshBuilder More...

unsafe NXOpen.CAE.RemesherBuilder	CreateRemesherBuilder ()
	Creates a builder for remesh command More...

unsafe NXOpen.CAE.RemoveRibsBuilder	CreateRemoveRibsBuilder ()
	Creates a builder for remove ribs command More...

unsafe NXOpen.CAE.RigidEADBuilder	CreateRigidEadBuilder ()
	Creates a builder for the Rigid EAD block. More...

unsafe NXOpen.CAE.RigidEADBuilder	CreateRigidEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Rigid EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.ShellEADBuilder	CreateShellEadBuilder ()
	Creates a builder for the Shell EAD block. More...

unsafe NXOpen.CAE.ShellEADBuilder	CreateShellEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Shell EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.SolidEADBuilder	CreateSolidEadBuilder ()
	Creates a builder for the Solid EAD block. More...

unsafe NXOpen.CAE.SolidEADBuilder	CreateSolidEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Solid EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.SpiderElementBuilder	CreateSpiderElementBuilder ()
	Creates a builder for spider element command More...

unsafe NXOpen.CAE.SpringEADBuilder	CreateSpringEadBuilder ()
	Creates a builder for the Spring EAD block. More...

unsafe NXOpen.CAE.SpringEADBuilder	CreateSpringEadBuilder (NXOpen.CAE.FEElement element)
	Creates a builder for the Spring EAD block and initializes it with the input element if defined. More...

unsafe NXOpen.CAE.SurfaceCoatBuilder	CreateSurfaceCoatBuilder ()
	Creates a builder for the Surface Coat. More...

unsafe NXOpen.CAE.MoveNodeBuilder	CreateSwapDiagonalBuilder ()
	Creates a builder for swap diagonal command More...

unsafe NXOpen.CAE.SweepBetweenMeshBuilder	CreateSweepBetweenMeshBuilder ()
	Creates a builder for Manual Hex Mesh. More...

unsafe NXOpen.CAE.ThickenMeshBuilder	CreateThickenMeshBuilder ()
	Creates a NXOpen.CAE.ThickenMeshBuilder More...

unsafe NXOpen.CAE.WireframeFromDOFSetBuilder	CreateWireframeFromDofsetBuilder ()
	Creates a builder for wireframe from CaeDOFSet command More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
NXOpen.CAE.ElementAssociatedDataUtils	ElemAssociatedDataUtils `[get]`
	Returns the element associated data access utility More...

NXOpen.CAE.ElementInfoUtils	ElemInfoUtils `[get]`
	Returns the element information utility More...

Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.Utilities.NXRemotableObject
void	initialize ()
	<exclude> More...

Detailed Description

Provides method for creating builder for node element operation commands in a fem part

To obtain an instance of this class, refer to NXOpen.CAE.BaseFEModel

Created in NX5.0.0

Member Function Documentation

unsafe NXOpen.CAE.AcousticChamberMeshBuilder NXOpen.CAE.NodeElementManager.CreateAcousticChamberMeshBuilder ( NXOpen.CAE.RecipeAcousticChamberMesh mesh )

inline

Creates a NXOpen.CAE.AcousticChamberMeshBuilder

Created in NX1872.0.0

License requirements: sc_acou_meshing (" SC Acoustic Meshing")

Parameters

mesh	Acoustic Chamber Mesh entity to be edited.

Returns

unsafe NXOpen.CAE.AttachElementsBuilder NXOpen.CAE.NodeElementManager.CreateAttachElementsBuilder ( )

inline

Creates a builder for attach elements command

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.AutomaticMorphBuilder NXOpen.CAE.NodeElementManager.CreateAutomaticMorphBuilder ( )

inline

Creates a builder for Automatic Morphing command

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.BeamEADBuilder NXOpen.CAE.NodeElementManager.CreateBeamEadBuilder ( )

inline

Creates a builder for the Beam EAD block.

Created in NX6.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.BeamEADBuilder NXOpen.CAE.NodeElementManager.CreateBeamEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Beam EAD block and initializes it with the input element if defined.

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.BushingEADBuilder NXOpen.CAE.NodeElementManager.CreateBushingEadBuilder ( )

inline

Creates a builder for the Bushing EAD block.

Created in NX7.5.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.BushingEADBuilder NXOpen.CAE.NodeElementManager.CreateBushingEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Bushing EAD block and initializes it with the input element if defined.

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.CombineTrisBuilder NXOpen.CAE.NodeElementManager.CreateCombineTrisBuilder ( )

inline

Creates a builder for Combine Tris.

Created in NX7.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ConvexMeshBuilder NXOpen.CAE.NodeElementManager.CreateConvexMeshBuilder ( NXOpen.CAE.RecipeConvexMesh mesh )

inline

Creates a NXOpen.CAE.ConvexMeshBuilder

Created in NX12.0.0

License requirements: sc_acou_meshing (" SC Acoustic Meshing")

Parameters

mesh	Convex Mesh entity to be edited.

Returns

unsafe NXOpen.CAE.ConvexMeshBuilder NXOpen.CAE.NodeElementManager.CreateConvexMeshBuilder ( )

inline

Creates a NXOpen.CAE.ConvexMeshBuilder

Created in NX11.0.0

Deprecated in NX12.0.0. Use NXOpen.CAE.NodeElementManager instead.

License requirements: sc_acou_meshing (" SC Acoustic Meshing")

Returns

unsafe NXOpen.CAE.DamperEADBuilder NXOpen.CAE.NodeElementManager.CreateDamperEadBuilder ( )

inline

Creates a builder for the Damper EAD block.

Created in NX12.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.DamperEADBuilder NXOpen.CAE.NodeElementManager.CreateDamperEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Damper EAD block and initializes it with the input element if defined.

Created in NX12.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.ElementDeleteBuilder NXOpen.CAE.NodeElementManager.CreateDeleteElementBuilder ( )

inline

Creates a builder for element delete command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.DestinationCollectorBuilder NXOpen.CAE.NodeElementManager.CreateDestinationCollectorBuilder	(	bool	isInEdit,
		NXOpen.CAE.ElementTypeBuilder	elementTypeBuilder
	)

inline

Creates a builder for the Destination Collector Specification block.

Created in NX6.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

isInEdit	the parent builder is editng an existing mesh/element collection.
elementTypeBuilder	the element type specification block

Returns

unsafe NXOpen.CAE.ElementConnectivityBuilder NXOpen.CAE.NodeElementManager.CreateElementConnectivityBuilder ( )

inline

Creates a builder for element connectivity command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementCreateBuilder NXOpen.CAE.NodeElementManager.CreateElementCreateBuilder ( )

inline

Creates a builder for element create command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementDetachBuilder NXOpen.CAE.NodeElementManager.CreateElementDetachBuilder ( )

inline

Creates a builder for element detach command

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementExtractBuilder NXOpen.CAE.NodeElementManager.CreateElementExtractBuilder ( )

inline

Creates a builder for Element Extract.

Created in NX7.5.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementExtrudeBuilder NXOpen.CAE.NodeElementManager.CreateElementExtrudeBuilder ( )

inline

Creates a builder for element extrude command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementModifyLabelBuilder NXOpen.CAE.NodeElementManager.CreateElementModifyLabelBuilder ( )

inline

Creates a builder for element modify label command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementModifyOrderBuilder NXOpen.CAE.NodeElementManager.CreateElementModifyOrderBuilder ( )

inline

Creates a builder for element modify order command

Created in NX6.0.1

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementModifyTypeBuilder NXOpen.CAE.NodeElementManager.CreateElementModifyTypeBuilder ( )

inline

Creates a builder for element modify type command

Created in NX8.5.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementProjectBuilder NXOpen.CAE.NodeElementManager.CreateElementProjectBuilder ( )

inline

Creates a builder for element project command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementReflectBuilder NXOpen.CAE.NodeElementManager.CreateElementReflectBuilder ( )

inline

Creates a builder for element reflect command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementRevolveBuilder NXOpen.CAE.NodeElementManager.CreateElementRevolveBuilder ( )

inline

Creates a builder for element revolve command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementRotateBuilder NXOpen.CAE.NodeElementManager.CreateElementRotateBuilder ( )

inline

Creates a builder for element translate command

Created in NX12.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementSplitBuilder NXOpen.CAE.NodeElementManager.CreateElementSplitBuilder ( )

inline

Creates a builder for element split command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementTranslateBuilder NXOpen.CAE.NodeElementManager.CreateElementTranslateBuilder ( )

inline

Creates a builder for element translate command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ElementTypeBuilder NXOpen.CAE.NodeElementManager.CreateElementTypeBuilder ( )

inline

Creates a builder for the Element Type Specification block.

Created in NX6.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.GapEADBuilder NXOpen.CAE.NodeElementManager.CreateGapEadBuilder ( )

inline

Creates a builder for the Gap EAD block.

Created in NX7.5.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.GapEADBuilder NXOpen.CAE.NodeElementManager.CreateGapEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Gap EAD block and initializes it with the input element if defined.

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.GlobalAeroCsysBuilder NXOpen.CAE.NodeElementManager.CreateGlobalAeroCsysBuilder ( )

inline

Creates a builder for global aero csys command

Created in NX1872.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.InterpolationEADBuilder NXOpen.CAE.NodeElementManager.CreateInterpolationEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Interpolation EAD block and initializes it with the input element if defined.

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.LumpedMassEADBuilder NXOpen.CAE.NodeElementManager.CreateLumpedMassEadBuilder ( )

inline

Creates a builder for the Lumped Mass EAD block.

Created in NX6.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.LumpedMassEADBuilder NXOpen.CAE.NodeElementManager.CreateLumpedMassEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the LumpedMass EAD block and initializes it with the input element if defined.

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.ManualMorphBuilder NXOpen.CAE.NodeElementManager.CreateManualMorphBuilder ( )

inline

Creates a builder for Manual Morphing command

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ManualNodeAssociationBuilder NXOpen.CAE.NodeElementManager.CreateManualNodeAssociationBuilder ( )

inline

Creates a builder for manual node association command

Created in NX10.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.MeshFromBoundaryBuilder NXOpen.CAE.NodeElementManager.CreateMeshFromBoundaryBuilder ( )

inline

Creates Mesh From Boundary builder.

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.MeshFromPointCloudBuilder NXOpen.CAE.NodeElementManager.CreateMeshFromPointCloudBuilder ( )

inline

Creates a builder for mesh from point cloud command

Created in NX1872.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.MorphRevolvedMeshBuilder NXOpen.CAE.NodeElementManager.CreateMorphRevolvedMeshBuilder ( )

inline

Creates a NXOpen.CAE.MorphRevolvedMeshBuilder

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.MoveNodeBuilder NXOpen.CAE.NodeElementManager.CreateMoveNodeBuilder ( )

inline

Creates a builder for move node command

Created in NX12.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.MultipleElementCreateBuilder NXOpen.CAE.NodeElementManager.CreateMultipleElementCreateBuilder ( int estimatedNumberOfElements )

inline

Creates a builder for the creation of multiple elements.

Created in NX7.5.2

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

estimatedNumberOfElements the estimated number of elements that will be created. It need not be exact.

Returns

unsafe NXOpen.CAE.MultipleNodeCreateBuilder NXOpen.CAE.NodeElementManager.CreateMultipleNodeCreateBuilder ( int estimatedNumberOfNodes )

inline

Creates a builder for the creation of multiple nodes.

Created in NX7.5.2

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

estimatedNumberOfNodes the Estimated number of nodes that will be created. It need not be exact.

Returns

unsafe NXOpen.CAE.NodeAlignBuilder NXOpen.CAE.NodeElementManager.CreateNodeAlignBuilder ( )

inline

Creates a builder for node align command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeAssociationBuilder NXOpen.CAE.NodeElementManager.CreateNodeAssociationBuilder ( )

inline

Creates a builder for node association command

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeCreateBuilder NXOpen.CAE.NodeElementManager.CreateNodeCreateBuilder ( )

inline

Creates a builder for node create command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeDeleteBuilder NXOpen.CAE.NodeElementManager.CreateNodeDeleteBuilder ( )

inline

Creates a builder for node delete command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeDissociationBuilder NXOpen.CAE.NodeElementManager.CreateNodeDissociationBuilder ( )

inline

Creates a builder for node dissociation command

Created in NX9.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeModifyLabelBuilder NXOpen.CAE.NodeElementManager.CreateNodeModifyLabelBuilder ( )

inline

Creates a builder for node modify label command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeModifyLocationBuilder NXOpen.CAE.NodeElementManager.CreateNodeModifyLocationBuilder ( )

inline

Creates a builder for node modify location command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeProjectBuilder NXOpen.CAE.NodeElementManager.CreateNodeProjectBuilder ( )

inline

Creates a builder for node project command

Created in NX8.5.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeReflectBuilder NXOpen.CAE.NodeElementManager.CreateNodeReflectBuilder ( )

inline

Creates a builder for Node reflect command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeRotateBuilder NXOpen.CAE.NodeElementManager.CreateNodeRotateBuilder ( )

inline

Creates a builder for node rotate command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodesBetweenNodesBuilder NXOpen.CAE.NodeElementManager.CreateNodesBetweenNodesBuilder ( )

inline

Creates a builder for node between nodes command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodesOnCurveBuilder NXOpen.CAE.NodeElementManager.CreateNodesOnCurveBuilder ( )

inline

Creates a builder for nodes on curve command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodesRepositionBuilder NXOpen.CAE.NodeElementManager.CreateNodesRepositionBuilder ( )

inline

Creates a builder for repositioning nodes, Use this command when you need to modify many nodes at one time.

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.NodeTranslateBuilder NXOpen.CAE.NodeElementManager.CreateNodeTranslateBuilder ( )

inline

Creates a builder for node translate command

Created in NX5.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.OneDimensionalElementSplitBuilder NXOpen.CAE.NodeElementManager.CreateOneDimensionalElementSplitBuilder ( )

inline

Creates a builder for one dimensional element split command

Created in NX8.5.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.OpenDuctMeshBuilder NXOpen.CAE.NodeElementManager.CreateOpenDuctMeshBuilder ( NXOpen.CAE.RecipeOpenDuctMesh mesh )

inline

Creates a NXOpen.CAE.OpenDuctMeshBuilder

Created in NX12.0.0

License requirements: sc_acou_meshing (" SC Acoustic Meshing")

Parameters

mesh	Open Duct Mesh entity to be edited.

Returns

unsafe NXOpen.CAE.RemesherBuilder NXOpen.CAE.NodeElementManager.CreateRemesherBuilder ( )

inline

Creates a builder for remesh command

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.RemoveRibsBuilder NXOpen.CAE.NodeElementManager.CreateRemoveRibsBuilder ( )

inline

Creates a builder for remove ribs command

Created in NX11.0.0

License requirements: sc_acou_meshing (" SC Acoustic Meshing")

Returns

unsafe NXOpen.CAE.RigidEADBuilder NXOpen.CAE.NodeElementManager.CreateRigidEadBuilder ( )

inline

Creates a builder for the Rigid EAD block.

Created in NX12.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.RigidEADBuilder NXOpen.CAE.NodeElementManager.CreateRigidEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Rigid EAD block and initializes it with the input element if defined.

Created in NX12.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.ShellEADBuilder NXOpen.CAE.NodeElementManager.CreateShellEadBuilder ( )

inline

Creates a builder for the Shell EAD block.

Created in NX6.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ShellEADBuilder NXOpen.CAE.NodeElementManager.CreateShellEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Shell EAD block and initializes it with the input element if defined.

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.SolidEADBuilder NXOpen.CAE.NodeElementManager.CreateSolidEadBuilder ( )

inline

Creates a builder for the Solid EAD block.

Created in NX1872.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.SolidEADBuilder NXOpen.CAE.NodeElementManager.CreateSolidEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Solid EAD block and initializes it with the input element if defined.

Created in NX1872.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.SpiderElementBuilder NXOpen.CAE.NodeElementManager.CreateSpiderElementBuilder ( )

inline

Creates a builder for spider element command

Created in NX5.0.1

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.SpringEADBuilder NXOpen.CAE.NodeElementManager.CreateSpringEadBuilder ( )

inline

Creates a builder for the Spring EAD block.

Created in NX6.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.SpringEADBuilder NXOpen.CAE.NodeElementManager.CreateSpringEadBuilder ( NXOpen.CAE.FEElement element )

inline

Creates a builder for the Spring EAD block and initializes it with the input element if defined.

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

element element to be edited, if a null reference (Nothing in Visual Basic) then create a new one

Returns

unsafe NXOpen.CAE.SurfaceCoatBuilder NXOpen.CAE.NodeElementManager.CreateSurfaceCoatBuilder ( )

inline

Creates a builder for the Surface Coat.

Created in NX6.0.1

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.MoveNodeBuilder NXOpen.CAE.NodeElementManager.CreateSwapDiagonalBuilder ( )

inline

Creates a builder for swap diagonal command

Created in NX12.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.SweepBetweenMeshBuilder NXOpen.CAE.NodeElementManager.CreateSweepBetweenMeshBuilder ( )

inline

Creates a builder for Manual Hex Mesh.

Created in NX7.5.2

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

unsafe NXOpen.CAE.ThickenMeshBuilder NXOpen.CAE.NodeElementManager.CreateThickenMeshBuilder ( )

inline

Creates a NXOpen.CAE.ThickenMeshBuilder

Created in NX11.0.0

License requirements: sc_acou_meshing (" SC Acoustic Meshing")

Returns

unsafe NXOpen.CAE.WireframeFromDOFSetBuilder NXOpen.CAE.NodeElementManager.CreateWireframeFromDofsetBuilder ( )

inline

Creates a builder for wireframe from CaeDOFSet command

Created in NX1872.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Returns

Property Documentation

NXOpen.CAE.ElementAssociatedDataUtils NXOpen.CAE.NodeElementManager.ElemAssociatedDataUtils

get

Returns the element associated data access utility

Created in NX12.0.0

NXOpen.CAE.ElementInfoUtils NXOpen.CAE.NodeElementManager.ElemInfoUtils

get

Returns the element information utility

Created in NX11.0.0

Tag NXOpen.CAE.NodeElementManager.Tag

get

Returns the tag of this object.

The documentation for this class was generated from the following file:

CAE_NodeElementManager.cs

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Function Documentation

Property Documentation