|
NXOpen .NET Reference Guide
1899
|
|
NXOpen .NET Reference Guide
1899
|
This class provides Beam/Bar Associated Data Support More...
Public Types | |
| enum | EndReleaseSetting { Off, On } |
| indicates which end release setting to use More... | |
| enum | OffsetCsysChoice { NodalDisplacement, Elemental } |
| indicates which coordindate system to be used to define beam section offsets More... | |
| enum | OrientationCsys { Absolute, Nodal } |
| indicates which orientation csys type to use More... | |
| enum | OrientationMethod { Vector, Node } |
| indicates which orientation method to use More... | |
| enum | State { Ignore, Apply, Clear } |
| indicates to ignore, apply or clear the state property upon commit More... | |
| enum | VectorChoiceType { Horizontal, Vertical } |
| indicates which vector choice to use More... | |
Properties | |
| unsafe NXOpen.CAE.SelectElementsBuilder | Elements [get] |
| Returns the select element operator selects elements More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.OffsetCsysChoice | EndAOffsetCSYS [get, set] |
| Returns or sets the offset definition coordindate system of the element at End A More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.OffsetCsysChoice | EndBOffsetCSYS [get, set] |
| Returns or sets the offset definition coordindate system of the element at End B More... | |
| unsafe NXOpen.Expression | EndOffsetA1 [get] |
| Returns the end A offset component 1 expression of the element More... | |
| unsafe NXOpen.Expression | EndOffsetA2 [get] |
| Returns the end A offset component 2 expression of the element More... | |
| unsafe NXOpen.Expression | EndOffsetA3 [get] |
| Returns the end A offset component 3 expression of the element More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.State | EndOffsetAState [get, set] |
| Returns or sets the state drives the commit action More... | |
| unsafe NXOpen.Expression | EndOffsetB1 [get] |
| Returns the end B offset component 1 expression of the element More... | |
| unsafe NXOpen.Expression | EndOffsetB2 [get] |
| Returns the end B offset component 2 expression of the element More... | |
| unsafe NXOpen.Expression | EndOffsetB3 [get] |
| Returns the end B offset component 3 expression of the element More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.State | EndOffsetBState [get, set] |
| Returns or sets the state drives the commit action More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseA1 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 1 for end A More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseA2 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 2 for end A More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseA3 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 3 for end A More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseA4 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 4 for end A More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseA5 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 5 for end A More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseA6 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 6 for end A More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.State | EndReleaseAState [get, set] |
| Returns or sets the method to get the state of end release A More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseB1 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 1 for end B More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseB2 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 2 for end B More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseB3 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 3 for end B More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseB4 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 4 for end B More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseB5 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 5 for end B More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.EndReleaseSetting | EndReleaseB6 [get, set] |
| Returns or sets the get end release setting turns on or off the DOF 6 for end B More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.State | EndReleaseBState [get, set] |
| Returns or sets the method to get the state of end release B More... | |
| unsafe NXOpen.CAE.SelectFENodeList | Node [get] |
| Returns the get node operator selects an orientation node More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.OrientationCsys | OrientationCsysType [get, set] |
| Returns or sets the coordinate system of orientation which is only avaliable when the orientation method is vector. More... | |
| unsafe NXOpen.Vector3d | OrientationNodalDisplacementVector [get, set] |
| Returns or sets the orientation vector in nodal displacement coordindate system More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.State | OrientationState [get, set] |
| Returns or sets the state drives the commit action More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.OrientationMethod | OriMethod [get, set] |
| Returns or sets the method to get the element orientation method More... | |
| unsafe NXOpen.CAE.PhysicalPropertyTable | PhysicalPropertyTable [get, set] |
| Returns or sets the physical property table of the beam element More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.State | PhysicalPropertyTableState [get, set] |
| Returns or sets the physical property table state state drives the action upon commit More... | |
| unsafe NXOpen.Direction | SelectSectionOri [get, set] |
| Returns or sets the get selection ori operator gets section orientaion value in global vector mode More... | |
| unsafe NXOpen.CAE.BeamEADBuilder.VectorChoiceType | VectorChoice [get, set] |
| Returns or sets the method to get the orientation vector choice More... | |
 Properties inherited from NXOpen.Builder | |
| unsafe NXOpen.PreviewBuilder | PreviewBuilder [get] |
| Returns the preview builder subobject. More... | |
| Properties inherited from NXOpen.TaggedObject | |
| Tag | Tag [get] |
| Returns the tag of this object. More... | |
| Properties inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageSink | NextSink [get] |
| Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
| Public Member Functions inherited from NXOpen.Builder | |
| unsafe NXOpen.NXObject | Commit () |
| Commits any edits that have been applied to the builder. More... | |
| unsafe void | Destroy () |
| Deletes the builder, and cleans up any objects created by the builder. More... | |
| unsafe NXOpen.NXObject[] | GetCommittedObjects () |
| For builders that create more than one object, this method returns the objects that are created by commit. More... | |
| unsafe NXOpen.NXObject | GetObject () |
| Returns the object currently being edited by this builder. More... | |
| unsafe void | ShowResults () |
| Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
| unsafe bool | Validate () |
| Validate whether the inputs to the component are sufficient for commit to be called. More... | |
| Protected Member Functions inherited from NXOpen.TaggedObject | |
| new void | initialize () |
| <exclude> More... | |
This class provides Beam/Bar Associated Data Support
To create a new instance of this class, use NXOpen.CAE.NodeElementManager.CreateBeamEadBuilder
Default values.
| Property | Value |
|---|---|
|
EndReleaseAState |
Ignore |
|
EndReleaseBState |
Ignore |
|
OrientationState |
Ignore |
|
PhysicalPropertyTableState |
Ignore |
Created in NX6.0.0
|
get |
Returns the select element operator selects elements
Created in NX6.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the offset definition coordindate system of the element at End A
Created in NX1899.0.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the offset definition coordindate system of the element at End B
Created in NX1899.0.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the end A offset component 1 expression of the element
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the end A offset component 2 expression of the element
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the end A offset component 3 expression of the element
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the state drives the commit action
Created in NX7.5.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the end B offset component 1 expression of the element
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the end B offset component 2 expression of the element
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the end B offset component 3 expression of the element
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the state drives the commit action
Created in NX7.5.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 1 for end A
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 2 for end A
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 3 for end A
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 4 for end A
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 5 for end A
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 6 for end A
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the method to get the state of end release A
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 1 for end B
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 2 for end B
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 3 for end B
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 4 for end B
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 5 for end B
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get end release setting turns on or off the DOF 6 for end B
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the method to get the state of end release B
Created in NX6.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
get |
Returns the get node operator selects an orientation node
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the coordinate system of orientation which is only avaliable when the orientation method is vector.
Created in NX1899.0.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the orientation vector in nodal displacement coordindate system
Created in NX1899.0.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the state drives the commit action
Created in NX6.0.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the method to get the element orientation method
Created in NX7.5.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the physical property table of the beam element
Created in NX11.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the physical property table state state drives the action upon commit
Created in NX11.0.1
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the get selection ori operator gets section orientaion value in global vector mode
Created in NX6.0.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
|
getset |
Returns or sets the method to get the orientation vector choice
Created in NX7.5.0
License requirements to get this property: nx_masterfem ("Finite Element Modeling")
License requirements to set this property: nx_masterfem ("Finite Element Modeling")
