Represents a NXOpen.CAE.NodeTranslateBuilder More...

Inheritance diagram for NXOpen.CAE.NodeTranslateBuilder:

Public Types
enum	CopyType { TranslateOnly, CopyTranslate }
	the copy types More...

enum	DistanceType { PerCopy, Total }
	the distance types More...

enum	LabelType { LabelIncrement, ByOffset }
	the label types More...

enum	MethodType { ByComponents, AlongDirection, AlignVectors, PointToPoint, ScaleModel, ByField }
	the method types More...

Properties
unsafe NXOpen.CAE.NodeTranslateBuilder.CopyType	CopyOption `[get, set]`
	Returns or sets the copy option More...

unsafe NXOpen.CoordinateSystem	Csys `[get, set]`
	Returns or sets the csys More...

unsafe NXOpen.CAE.NodeTranslateBuilder.DistanceType	DistanceOption `[get, set]`
	Returns or sets the distance option More...

unsafe NXOpen.Fields.FieldWrapper	Field `[get, set]`
	Returns or sets the scale factor More...

unsafe int	Increment `[get, set]`
	Returns or sets the increment More...

unsafe int	Label `[get, set]`
	Returns or sets the label More...

unsafe NXOpen.CAE.NodeTranslateBuilder.LabelType	LabelOption `[get, set]`
	Returns or sets the label option More...

unsafe NXOpen.CAE.NodeTranslateBuilder.MethodType	MethodOption `[get, set]`
	Returns or sets the method option More...

unsafe NXOpen.CAE.SelectFENodeList	Node `[get]`
	Returns the node More...

unsafe int	NumCopy `[get, set]`
	Returns or sets the num copy More...

unsafe int	Offset `[get, set]`
	Returns or sets the offset More...

unsafe NXOpen.Expression	PAngle `[get]`
	Returns the p angle More...

unsafe NXOpen.Point	PointSource `[get, set]`
	Returns or sets the source point More...

unsafe NXOpen.Point	PointTarget `[get, set]`
	Returns or sets the target point More...

unsafe double	ScaleFactor `[get, set]`
	Returns or sets the scale factor More...

unsafe NXOpen.Expression	TAngle `[get]`
	Returns the t angle More...

unsafe NXOpen.Direction	Vector `[get, set]`
	Returns or sets the vector More...

unsafe NXOpen.Direction	VectorSource `[get, set]`
	Returns or sets the source vector More...

unsafe NXOpen.Direction	VectorTarget `[get, set]`
	Returns or sets the target vector More...

unsafe NXOpen.Expression	XDistance `[get]`
	Returns the x distance More...

unsafe double	XScaleFactor `[get, set]`
	Returns or sets the x scale factor More...

unsafe NXOpen.Expression	YDistance `[get]`
	Returns the y distance More...

unsafe double	YScaleFactor `[get, set]`
	Returns or sets the y scale factor More...

unsafe NXOpen.Expression	ZDistance `[get]`
	Returns the z distance More...

unsafe double	ZScaleFactor `[get, set]`
	Returns or sets the z scale factor More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a NXOpen.CAE.NodeTranslateBuilder

To create a new instance of this class, use NXOpen.CAE.NodeElementManager.CreateNodeTranslateBuilder

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.CAE.NodeTranslateBuilder.CopyType

the copy types

Enumerator
TranslateOnly	translate only
CopyTranslate	copy translate

enum NXOpen.CAE.NodeTranslateBuilder.DistanceType

the distance types

Enumerator
PerCopy	per copy
Total	total

enum NXOpen.CAE.NodeTranslateBuilder.LabelType

the label types

Enumerator
LabelIncrement	label increment
ByOffset	by offset

enum NXOpen.CAE.NodeTranslateBuilder.MethodType

the method types

Enumerator
ByComponents	by components
AlongDirection	along direction
AlignVectors	align vectors
PointToPoint	point to point
ScaleModel	scale model
ByField	by field

Property Documentation

unsafe NXOpen.CAE.NodeTranslateBuilder.CopyType NXOpen.CAE.NodeTranslateBuilder.CopyOption

getset

Returns or sets the copy option

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CoordinateSystem NXOpen.CAE.NodeTranslateBuilder.Csys

getset

Returns or sets the csys

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.NodeTranslateBuilder.DistanceType NXOpen.CAE.NodeTranslateBuilder.DistanceOption

getset

Returns or sets the distance option

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Fields.FieldWrapper NXOpen.CAE.NodeTranslateBuilder.Field

getset

Returns or sets the scale factor

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe int NXOpen.CAE.NodeTranslateBuilder.Increment

getset

Returns or sets the increment

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe int NXOpen.CAE.NodeTranslateBuilder.Label

getset

Returns or sets the label

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.NodeTranslateBuilder.LabelType NXOpen.CAE.NodeTranslateBuilder.LabelOption

getset

Returns or sets the label option

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.NodeTranslateBuilder.MethodType NXOpen.CAE.NodeTranslateBuilder.MethodOption

getset

Returns or sets the method option

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.SelectFENodeList NXOpen.CAE.NodeTranslateBuilder.Node

get

Returns the node

Created in NX5.0.0

License requirements: None.

unsafe int NXOpen.CAE.NodeTranslateBuilder.NumCopy

getset

Returns or sets the num copy

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe int NXOpen.CAE.NodeTranslateBuilder.Offset

getset

Returns or sets the offset

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Expression NXOpen.CAE.NodeTranslateBuilder.PAngle

get

Returns the p angle

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.Point NXOpen.CAE.NodeTranslateBuilder.PointSource

getset

Returns or sets the source point

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Point NXOpen.CAE.NodeTranslateBuilder.PointTarget

getset

Returns or sets the target point

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe double NXOpen.CAE.NodeTranslateBuilder.ScaleFactor

getset

Returns or sets the scale factor

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Expression NXOpen.CAE.NodeTranslateBuilder.TAngle

get

Returns the t angle

Created in NX5.0.0

License requirements: None.

unsafe NXOpen.Direction NXOpen.CAE.NodeTranslateBuilder.Vector

getset

Returns or sets the vector

Created in NX5.0.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Direction NXOpen.CAE.NodeTranslateBuilder.VectorSource

getset

Returns or sets the source vector

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Direction NXOpen.CAE.NodeTranslateBuilder.VectorTarget

getset

Returns or sets the target vector

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Expression NXOpen.CAE.NodeTranslateBuilder.XDistance

get

Returns the x distance

Created in NX5.0.0

License requirements: None.

unsafe double NXOpen.CAE.NodeTranslateBuilder.XScaleFactor

getset

Returns or sets the x scale factor

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Expression NXOpen.CAE.NodeTranslateBuilder.YDistance

get

Returns the y distance

Created in NX5.0.0

License requirements: None.

unsafe double NXOpen.CAE.NodeTranslateBuilder.YScaleFactor

getset

Returns or sets the y scale factor

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.Expression NXOpen.CAE.NodeTranslateBuilder.ZDistance

get

Returns the z distance

Created in NX5.0.0

License requirements: None.

unsafe double NXOpen.CAE.NodeTranslateBuilder.ZScaleFactor

getset

Returns or sets the z scale factor

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

The documentation for this class was generated from the following file:

CAE_NodeTranslateBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation