NXOpen .NET Reference Guide
1899
|
Represents a system to access element associated data More...
Properties | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Properties inherited from NXOpen.Utilities.NXRemotableObject | |
IMessageSink | NextSink [get] |
Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
Protected Member Functions inherited from NXOpen.Utilities.NXRemotableObject | |
void | initialize () |
<exclude> More... | |
Represents a system to access element associated data
To obtain an instance of this class, refer to NXOpen.CAE.NodeElementManager
Created in NX12.0.0
Returns beam element associated data.
Created in NX12.0.0
Deprecated in NX1899.0.0. Use NXOpen.CAE.ElementAssociatedDataUtils.AskBeamData2 instead.
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
physicalPropertyTable | Physical property table of the beam element. |
oriMethod | Orientation method. |
vectorType | Orientation vector type. Only used if orientation method is vector. |
direction | Orientation direction. Only used if orientation method is vector. |
orientationNode | Orientation node. Only used if orientation method is node. |
endAState | Pin flags End A state |
pinFlagEndADOF1 | Pin flag End A for DOF 1. |
pinFlagEndADOF2 | Pin flag End A for DOF 2. |
pinFlagEndADOF3 | Pin flag End A for DOF 3. |
pinFlagEndADOF4 | Pin flag End A for DOF 4. |
pinFlagEndADOF5 | Pin flag End A for DOF 5. |
pinFlagEndADOF6 | Pin flag End A for DOF 6. |
endBState | Pin flags End B state |
pinFlagEndBDOF1 | Pin flag End B for DOF 1. |
pinFlagEndBDOF2 | Pin flag End B for DOF 2. |
pinFlagEndBDOF3 | Pin flag End B for DOF 3. |
pinFlagEndBDOF4 | Pin flag End B for DOF 4. |
pinFlagEndBDOF5 | Pin flag End B for DOF 5. |
pinFlagEndBDOF6 | Pin flag End B for DOF 6. |
xOffsetEndA | X offset to shear center in nodal displacement coordinate system for End A in units mm or in. |
yOffsetEndA | Y offset to shear center in nodal displacement coordinate system for End A in units mm or in. |
zOffsetEndA | Z offset to shear center in nodal displacement coordinate system for End A in units mm or in. |
xOffsetEndB | X offset to shear center in nodal displacement coordinate system for End B in units mm or in. |
yOffsetEndB | Y offset to shear center in nodal displacement coordinate system for End B in units mm or in. |
zOffsetEndB | Z offset to shear center in nodal displacement coordinate system for End B in units mm or in. |
|
inline |
Returns beam element associated data.
Created in NX1899.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
physicalPropertyTable | Physical property table of the beam element. |
oriMethod | Orientation method. |
orientationCsysType | Orientation coordinate system type. Only used if orientation method is vector. |
vectorType | Orientation vector type. Only used if orientation method is vector. |
direction | Orientation direction. Only used if orientation method is vector. |
orientationNode | Orientation node. Only used if orientation method is node. |
endAState | Pin flags End A state |
pinFlagEndADOF1 | Pin flag End A for DOF 1. |
pinFlagEndADOF2 | Pin flag End A for DOF 2. |
pinFlagEndADOF3 | Pin flag End A for DOF 3. |
pinFlagEndADOF4 | Pin flag End A for DOF 4. |
pinFlagEndADOF5 | Pin flag End A for DOF 5. |
pinFlagEndADOF6 | Pin flag End A for DOF 6. |
endBState | Pin flags End B state |
pinFlagEndBDOF1 | Pin flag End B for DOF 1. |
pinFlagEndBDOF2 | Pin flag End B for DOF 2. |
pinFlagEndBDOF3 | Pin flag End B for DOF 3. |
pinFlagEndBDOF4 | Pin flag End B for DOF 4. |
pinFlagEndBDOF5 | Pin flag End B for DOF 5. |
pinFlagEndBDOF6 | Pin flag End B for DOF 6. |
offsetCSYSEndA | Offset coordinate system type for End A. |
xOffsetEndA | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is X offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End A in units mm or in. For other solvers, this value is X offset regarding language-specific coordinate system for End A in units mm or in. |
yOffsetEndA | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is Y offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End A in units mm or in. For other solvers, this value is Y offset regarding language-specific coordinate system for End A in units mm or in. |
zOffsetEndA | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is Z offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End A in units mm or in. For other solvers, this value is Z offset regarding language-specific coordinate system for End A in units mm or in. |
offsetCSYSEndB | Offset coordinate system type for End B. |
xOffsetEndB | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is X offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End B in units mm or in. For other solvers, this value is X offset regarding language-specific coordinate system for End B in units mm or in. |
yOffsetEndB | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is Y offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End B in units mm or in. For other solvers, this value is Y offset regarding language-specific coordinate system for End B in units mm or in. |
zOffsetEndB | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is Z offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End B in units mm or in. For other solvers, this value is Z offset regarding language-specific coordinate system for End B in units mm or in. |
|
inline |
Returns bushing element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
physicalPropertyTable | Physical property table of the bushing element. |
oriMethod | Orientation method. |
oriDirr | Orientation vector. |
coordinateSystem | Coordinate system for orienting by coordinate system. |
oriNode | Orientation node. |
csysDataType | Orientation coordinate system type for csys data option. |
originPoint | Orientation csys data origin point. |
zAxisPoint | Orientation csys data point on z-axis. |
planePoint | Orientation csys data point in the x-z plane if cartesian csys or azimuthal origin plane if cylindrical/spherical csys. |
preferredLabel | Preferred coordinate system label for csys data export. |
|
inline |
Returns constraint element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
terms | Term of dof in the constraint equation. The first degree of freedom in the array defines the dependent degree of freedom. |
constantTerm | The constant term is the constant that the constraint equation equals. This value is not used by all solvers. |
|
inline |
Returns damper element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
viscousDamping | Viscous damping value either translational in units N-sec/mm or lbf-sec/in or rotational in units mN-mm-sec or lbf-in-sec. |
physicalPropertyTable | Physical property table of the damper element. |
componentEndA | Component end A of the damper element (either translational or rotational). |
componentEndB | Component end B of the damper element (either translational or rotational). |
|
inline |
Returns gap element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
physicalPropertyTable | Physical property table of the gap element. |
oriMethod | Orientation method. |
oriDirr | Orientation vector. |
coordinateSystem | Coordinate system for orienting by coordinate system. |
oriNode | Orientation node. |
|
inline |
Returns interpolation element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
dofDataTerms | Term of dof in the interpolation element. |
|
inline |
Returns lumped mass element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
mass | Mass value. |
|
inline |
Returns rigid element associated data.
Created in NX12.0.0
Deprecated in NX1847.0.0. NXOpen.CAE.ElementAssociatedDataUtils.AskRigidData2 instead.
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
dofs | The 6 dofs of the rigid element. |
|
inline |
Returns rigid element associated data.
Created in NX1847.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
physicalPropertyTable | Physical property table of the rigid element. |
dofs | The 6 dofs of the rigid element. |
|
inline |
Returns rspline element associated data.
Created in NX1899.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
dofDataTerms | Term of component dofs in the rspline element. |
|
inline |
Returns shell element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
cornerNodeThicknesses | Corner node thicknesses in units mm or in. |
cornerNodeGapValues | Corner node gap values in units mm or in. |
zOffset | Z offset value. |
physicalPropertyTable | Physical property table of the shell element. |
matOriMethod | Material orientation method. |
coordinateSystem | Coordinate system for orienting by coordinate system. |
matOriAngle | Material orientation angle. |
csysDataType | Material orientation coordinate system type for csys data option. |
originPoint | Material orientation csys data origin point. |
zAxisPoint | Material orientation csys data point on z-axis. |
planePoint | Material orientation csys data point in the x-z plane if cartesian csys or azimuthal origin plane if cylindrical/spherical csys. |
preferredLabel | Preferred coordinate system label for csys data export. |
|
inline |
Returns solid element associated data.
Created in NX1872.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
physicalPropertyTable | Physical property table of the element. |
|
inline |
Returns spring element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
hasAssociatedDataDefined | True if element has element associated data defined. If false, the parameters that follow are ignored. |
physicalPropertyTable | Physical property table of the spring element. |
stiffness | Spring stiffness value either translational in units N/mm or lbf/in or rotational in units N-mm or lbf-in. |
componentEndA | Component end A of the spring element (either translational or rotational). |
componentEndB | Component end B of the spring element (either translational or rotational). |
|
inline |
Sets beam element associated data.
Created in NX12.0.0
Deprecated in NX1899.0.0. Use NXOpen.CAE.ElementAssociatedDataUtils.SetBeamData2 which has 32 parameters instead.
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
physicalPropertyTable | Physical property table of the beam element. |
oriMethod | Orientation method. |
vectorType | Orientation vector type. Only used if orientation method is vector. |
direction | Orientation direction. Only used if orientation method is vector. |
orientationNode | Orientation node. Only used if orientation method is node. |
endReleaseA | End Release A state. |
pinFlagEndADOF1 | Pin flag End A for DOF 1. |
pinFlagEndADOF2 | Pin flag End A for DOF 2. |
pinFlagEndADOF3 | Pin flag End A for DOF 3. |
pinFlagEndADOF4 | Pin flag End A for DOF 4. |
pinFlagEndADOF5 | Pin flag End A for DOF 5. |
pinFlagEndADOF6 | Pin flag End A for DOF 6. |
endReleaseB | End Release B state. |
pinFlagEndBDOF1 | Pin flag End B for DOF 1. |
pinFlagEndBDOF2 | Pin flag End B for DOF 2. |
pinFlagEndBDOF3 | Pin flag End B for DOF 3. |
pinFlagEndBDOF4 | Pin flag End B for DOF 4. |
pinFlagEndBDOF5 | Pin flag End B for DOF 5. |
pinFlagEndBDOF6 | Pin flag End B for DOF 6. |
xOffsetEndA | X offset to shear center in nodal displacement coordinate system for End A in units mm or in. |
yOffsetEndA | Y offset to shear center in nodal displacement coordinate system for End A in units mm or in. |
zOffsetEndA | Z offset to shear center in nodal displacement coordinate system for End A in units mm or in. |
xOffsetEndB | X offset to shear center in nodal displacement coordinate system for End B in units mm or in. |
yOffsetEndB | Y offset to shear center in nodal displacement coordinate system for End B in units mm or in. |
zOffsetEndB | Z offset to shear center in nodal displacement coordinate system for End B in units mm or in. |
|
inline |
Sets beam element associated data.
Created in NX1899.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
physicalPropertyTable | Physical property table of the beam element. |
oriMethod | Orientation method. |
orientationCsysType | Orientation coordinate system type. Only used if orientation method is vector. |
vectorType | Orientation vector type. Only used if orientation method is vector. |
direction | Orientation direction. Only used if orientation method is vector. |
orientationNode | Orientation node. Only used if orientation method is node. |
endReleaseA | End Release A state. |
pinFlagEndADOF1 | Pin flag End A for DOF 1. |
pinFlagEndADOF2 | Pin flag End A for DOF 2. |
pinFlagEndADOF3 | Pin flag End A for DOF 3. |
pinFlagEndADOF4 | Pin flag End A for DOF 4. |
pinFlagEndADOF5 | Pin flag End A for DOF 5. |
pinFlagEndADOF6 | Pin flag End A for DOF 6. |
endReleaseB | End Release B state. |
pinFlagEndBDOF1 | Pin flag End B for DOF 1. |
pinFlagEndBDOF2 | Pin flag End B for DOF 2. |
pinFlagEndBDOF3 | Pin flag End B for DOF 3. |
pinFlagEndBDOF4 | Pin flag End B for DOF 4. |
pinFlagEndBDOF5 | Pin flag End B for DOF 5. |
pinFlagEndBDOF6 | Pin flag End B for DOF 6. |
offsetCSYSEndA | Offset coordinate system type for End A. This value is only valid for solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran. |
xOffsetEndA | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is X offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End A in units mm or in. For other solvers, this value is X offset regarding language-specific coordinate system for End A in units mm or in. |
yOffsetEndA | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is Y offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End A in units mm or in. For other solvers, this value is Y offset regarding language-specific coordinate system for End A in units mm or in. |
zOffsetEndA | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is Z offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End A in units mm or in. For other solvers, this value is Z offset regarding language-specific coordinate system for End A in units mm or in. |
offsetCSYSEndB | Offset coordinate system type for End B. This value is only valid for solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran. |
xOffsetEndB | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is X offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End B in units mm or in. For other solvers, this value is X offset regarding language-specific coordinate system for End B in units mm or in. |
yOffsetEndB | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is Y offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End B in units mm or in. For other solvers, this value is Y offset regarding language-specific coordinate system for End B in units mm or in. |
zOffsetEndB | For solvers: NX Nastran, Simcenter Multiphysics and MSC Nastran, this value is Z offset to shear center regarding corresponding (either nodal or elemental) coordinate system for End B in units mm or in. For other solvers, this value is Z offset regarding language-specific coordinate system for End B in units mm or in. |
|
inline |
Sets bushing element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
physicalPropertyTable | Physical property table of the bushing element. |
oriMethod | Material orientation method. |
oriDirr | Orientation vector. |
coordinateSystem | Coordinate system for orienting by coordinate system. |
oriNode | Orientation node. |
csysDataType | Orientation coordinate system type for csys data option. |
originPoint | Orientation csys data origin point. |
zAxisPoint | Orientation csys data point on z-axis. |
planePoint | Orientation csys data point in the x-z plane if cartesian csys or azimuthal origin plane if cylindrical/spherical csys. |
preferredLabel | Preferred coordinate system label for csys data export. |
|
inline |
Sets constraint element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
terms | Term of dof in the constraint equation. The first degree of freedom in the array defines the dependent degree of freedom. |
constantTerm | The constant term is the constant that the constraint equation equals. This value is not used by all solvers. |
|
inline |
Sets damper element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
viscousDamping | Viscous damping value either translational in units N-sec/mm or lbf-sec/in or rotational in units mN-mm-sec or lbf-in-sec. |
physicalPropertyTable | Physical property table of the damper element. |
componentEndA | Component end A of the damper element (either translational or rotational. |
componentEndB | Component end B of the damper element (either translational or rotational. |
|
inline |
Sets gap element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
physicalPropertyTable | Physical property table of the gap element. |
oriMethod | Material orientation method. |
oriDirr | Orientation vector. |
coordinateSystem | Coordinate system for orienting by coordinate system. |
oriNode | Orientation node. |
|
inline |
Sets interpolation element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
dofDataTerms | Term of dof in the interpolation element. |
umData | Data that indicates the start of the degrees-of-freedom belonging to the m-set. This value is not used by all solvers. |
|
inline |
Sets lumped mass element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
mass | Mass value in units kg or lbm. |
|
inline |
Sets rigid element associated data.
Created in NX12.0.0
Deprecated in NX1847.0.0. NXOpen.CAE.ElementAssociatedDataUtils.SetRigidData2 instead.
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
dofs | The 6 dofs of the rigid element. |
|
inline |
Sets rigid element associated data.
Created in NX1847.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
physicalPropertyTable | Physical property table of the rigid element. |
dofs | The 6 dofs of the rigid element. |
|
inline |
Sets rspline element associated data.
Created in NX1899.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
dofDataTerms | Term of component dofs in the rspline element. |
|
inline |
Sets shell element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
cornerNodeThicknesses | Corner node thicknesses in units mm or in. |
cornerNodeGapValues | Corner node gap values in units mm or in. |
zOffset | Z offset value. |
physicalPropertyTable | Physical property table of the shell element. |
matOriMethod | Material orientation method. |
coordinateSystem | Coordinate system for orienting by coordinate system. |
matOriAngle | Material orientation angle. |
csysDataType | Material orientation coordinate system type for csys data option. |
originPoint | Material orientation csys data origin point. |
zAxisPoint | Material orientation csys data point on z-axis. |
planePoint | Material orientation csys data point in the x-z plane if cartesian csys or azimuthal origin plane if cylindrical/spherical csys. |
preferredLabel | Preferred coordinate system label for csys data export. |
|
inline |
Sets solid element associated data.
Created in NX1872.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
physicalPropertyTable | Physical property table of the element. |
|
inline |
Sets spring element associated data.
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling")
element | |
physicalPropertyTable | Physical property table of the spring element. |
stiffness | Spring stiffness value either translational in units N/mm or lbf/in or rotational in units N-mm or lbf-in. |
componentEndA | Component end A of the spring element (either translational or rotational. |
componentEndB | Component end B of the spring element (either translational or rotational. |
|
get |
Returns the tag of this object.