Represents an NX part of type .afm. More...

Inheritance diagram for NXOpen.CAE.AssyFemPart:

Public Member Functions
unsafe void	FinalizeCreation (NXOpen.Part cadPart, string solverTypeName, string analysisTypeType, NXOpen.CAE.BaseFemPart.AxisymAbstractionType abstractionType, string[] description, bool useCyclicSymmetryCSYS, NXOpen.CoordinateSystem cyclicSymmetryCsys)
	Finalizes the creation of the assembly fem part file. More...

unsafe void	FinalizeCreation (NXOpen.Part cadPart, string solverTypeName, string analysisTypeType, NXOpen.CAE.BaseFemPart.AxisymAbstractionType abstractionType, string[] description)
	Finalizes the creation of the assembly fem part file. More...

unsafe void	FinalizeCreation (NXOpen.Part cadPart, string solverTypeName, string analysisTypeType, string[] description)
	Finalizes the creation of the assembly fem part file. More...

Public Member Functions inherited from NXOpen.CAE.BaseFemPart
unsafe NXOpen.CAE.BaseFemPart.AxisymAbstractionType	GetAbstractionType ()
	Gets axisymmetric abstraction type assoicated with the BaseFem part More...

unsafe NXOpen.CoordinateSystem	GetCyclicSymmetryCsys ()
	Gets the cyclic symmetry csys associated to the fem More...

unsafe bool	GetEnableMeshMorph ()
	Gets the enable mesh morphing flag More...

unsafe void	GetSolverAndAnalysisType (out string solverTypeName, out string analysisTypeName)
	Gets solver and analysis type assoicated with the BaseFem part More...

unsafe void	SetCyclicSymmetryCsys (NXOpen.CoordinateSystem cyclicSymmetryCsys)
	Sets the cyclic symmetry csys associated to the fem More...

unsafe void	SetEnableMeshMorph (bool isMorphingEnabled)
	Sets the enable mesh morphing flag More...

unsafe void	SetSolverAndAnalysisType (string solverTypeName, string analysisTypeName)
	Sets solver and analysis type assoicated with the BaseFem part. More...

unsafe void	SetSolverAndAnalysisTypeAndAbstraction (string solverTypeName, string analysisTypeName, NXOpen.CAE.BaseFemPart.AxisymAbstractionType abstractionType)
	Sets solver and analysis type and axisymmetric abstraction associated with the BaseFem part More...

unsafe void	SetUseCyclicSymmetryCsys (bool useCyclicSymmetryCsys)
	Sets the use cyclic symmetry csys flag More...

Public Member Functions inherited from NXOpen.CAE.CaePart
unsafe NXOpen.CAE.ConvertToConvergentBodyBuilder	CreateConvertToConvergentBodyBuilder ()
	Creates a NXOpen.CAE.ConvertToConvergentBodyBuilder More...

unsafe NXOpen.CAE.ModelDisplayBuilder	CreateModelDisplayBuilder ()
	Creates a builder for model display controls command More...

unsafe NXOpen.CAE.SolverAppendOption	CreateSolverAppendOption ()
	Returns a solver append option object for importing the solver specific data into an existing NXOpen.CAE.FemPart or NXOpen.CAE.SimPart . More...

unsafe void	DeleteSolverAppendOption (NXOpen.CAE.SolverAppendOption appendOption)
	Deletes a solver append option object for importing the solver specific data into an existing NXOpen.CAE.FemPart or NXOpen.CAE.SimPart . More...

unsafe void	ExportJt (string fileName)
	Exports JT file More...

unsafe void	ExportSimulation (string solverName, NXOpen.CAE.CaeDataContainer propertyList)
	Exports the Simulation data for a NXOpen.CAE.CaePart . More...

unsafe NXOpen.Fields.IApplication	GetApplication (NXOpen.CAE.CaePart.FieldApplicationType applicationType)
	Get the application which corresponds to the specified type. More...

unsafe int	GetCsysFlattenedLabel (NXOpen.CoordinateSystem csys)
	Gets the resolved label of csys in cae part. More...

unsafe void	GetDescription (out string[] description)
	Gets the description assoicated with the Cae part More...

unsafe void	ImportExistingSimulation (string solverName, NXOpen.CAE.CaeDataContainer propertyList)
	Imports the solver specific data into an existing NXOpen.CAE.FemPart or NXOpen.CAE.SimPart . More...

unsafe NXOpen.CAE.BeamSectionOffsetOptions	NewBeamSectionOffsetOptions ()
	Creates a NXOpen.CAE.BeamSectionOffsetOptions More...

unsafe NXOpen.CAE.BeamSectionOptions	NewBeamSectionOptions ()
	Creates a NXOpen.CAE.BeamSectionOptions More...

unsafe NXOpen.CAE.BeamSectionOrientationOptions	NewBeamSectionOrientationOptions ()
	Creates a NXOpen.CAE.BeamSectionOrientationOptions More...

unsafe NXOpen.CAE.MaterialOptions	NewMaterialOptions ()
	Creates a NXOpen.CAE.MaterialOptions More...

unsafe NXOpen.CAE.ThermoOpticalPropMgr	NewThermoOpticalPropMgr ()
	Creates a NXOpen.CAE.ThermoOpticalPropMgr More...

unsafe void	SetDescription (string[] description)
	Sets the description assoicated with the Cae part More...

Public Member Functions inherited from NXOpen.BasePart
unsafe void	AssignPermanentName (string newFileName)
	Saves a temporary part with the given name. More...

unsafe bool	CanBeDisplayPart ()
	Returns true if the part can be displayed and false if not displayed. More...

unsafe void	Close (NXOpen.BasePart.CloseWholeTree wholeTree, NXOpen.BasePart.CloseModified closeModified, NXOpen.PartCloseResponses responses)
	Closes an open part. More...

unsafe void	CompleteStructure ()
	Make additions necessary to complete the incomplete assembly structure of the input part More...

unsafe NXOpen.Display.DynamicSectionBuilder	CreateDynamicSectionBuilder (bool loadFromView)
	Creates a NXOpen.Display.DynamicSectionBuilder The base part must be a displayable part, otherwise an exception will be thrown. More...

unsafe NXOpen.EffectivityConditionBuilder	CreateEffectivityConditionBuilder (NXOpen.CollaborativeDesign cd, string effectivityFormula)
	Creates a NXOpen.EffectivityConditionBuilder More...

unsafe NXOpen.EffectivityConditionBuilder	CreateEffectivityConditionBuilder (NXOpen.CollaborativeDesign cd, string validationBasisFormula, string effectivityFormula)
	Creates a NXOpen.EffectivityConditionBuilder with initializing validation basis formula More...

unsafe NXOpen.Display.FacetSettingsBuilder	CreateFacetSettingsBuilder ()
	Creates a builder for the Facet Settings dialog More...

unsafe NXOpen.GroupBuilder	CreateGatewayGroupBuilder (NXOpen.Group group)
	Creates a Groups builder More...

unsafe NXOpen.Display.PerspectiveOptionsBuilder	CreatePerspectiveOptionsBuilder ()
	Creates a builder for the Perspective Options dialog More...

unsafe NXOpen.ReferenceSet	CreateReferenceSet ()
	Creates a NXOpen.ReferenceSet object More...

unsafe void	DeleteDisplayFacets (bool deleteSavedDisplayFacets, bool processChildren)
	Deletes transient and optionally saved display facets. More...

unsafe void	DeleteReferenceSet (NXOpen.ReferenceSet referenceSetObject)
	Deletes a NXOpen.ReferenceSet object More...

unsafe NXOpen.ReferenceSet[]	GetAllReferenceSets ()
	Get all the NXOpen.ReferenceSet objects in this part. More...

unsafe void	GetArrangements (out NXOpen.Assemblies.Arrangement[] arrangements)
	Outputs the NXOpen.Assemblies.Arrangement objects within the given part. More...

unsafe NXOpen.BasePart.CollaborativeContentType	GetCollaborativeContentType ()
	The collaborative content type of this part. More...

unsafe NXOpen.BasePart.HistoryEventInformation[]	GetHistoryInformation ()
	Get history of part More...

unsafe NXOpen.BasePart.IncompleteStatus	GetIncompleteStatus ()
	Inquire whether the provided part is flagged as being incomplete More...

unsafe string	GetMakeUniqueName ()
	Gets the Unique name on a part for the Make Unique operation More...

unsafe void	GetMinimallyLoadedParts (out NXOpen.BasePart[] minimallyLoadedParts)
	Gets the minimally loaded parts from input part. More...

unsafe void	GetPreviewImage (out int width, out int height, out int[] pixels)
	Get the preview image This will return the graphic preview image of the part (when available). More...

unsafe NXOpen.BasePart.TransientStatus	GetTransientStatus ()
	Inquire whether the provided part is flagged as being transient More...

unsafe bool	HasAnyMinimallyLoadedChildren ()
	Determines whether part has any minimally loaded descendent parts. More...

unsafe NXOpen.PartLoadStatus	LoadFeatureDataForSelection ()
	Ensure that feature data is loaded for a part. More...

unsafe NXOpen.PartLoadStatus	LoadFully ()
	Ensures that this part is fully loaded. More...

unsafe NXOpen.PartLoadStatus	LoadThisPartFully ()
	Ensures that this part is fully loaded. More...

unsafe NXOpen.PartLoadStatus	LoadThisPartPartially ()
	Ensures that this part is at least partially loaded. More...

unsafe void	RegenerateDisplayFacets (bool regenerateChildren)
	Regenerates display specific transient cached facets in the part. More...

unsafe void	RegenerateDisplayFacets (bool deleteSavedDisplayFacets, bool regenerateChildren)
	Regenerates display specific cached facets in the part. More...

unsafe void	ReinstateTransience ()
	Reinstate the transient status to the formerly transient input part More...

unsafe void	RemoveTransience ()
	Remove the transient status from the input part More...

unsafe NXOpen.BasePart	Reopen (NXOpen.BasePart.CloseWholeTree wholeTree, NXOpen.BasePart.CloseModified closeModified, NXOpen.PartCloseResponses responses, out NXOpen.PartReopenReport reopenReport)
	Reopens a loaded part. More...

unsafe NXOpen.BasePart	ReopenAs (string fileName, NXOpen.BasePart.CloseModified closeModified, NXOpen.PartCloseResponses responses, out NXOpen.PartReopenReport reopenReport)
	Reopens a loaded part. More...

unsafe void	ReverseBlankAll ()
	Reverse blank all the objects in the part. More...

unsafe NXOpen.PartSaveStatus	Save (NXOpen.BasePart.SaveComponents saveComponentParts, NXOpen.BasePart.CloseAfterSave close)
	Saves the part whether it is modified or not. More...

unsafe NXOpen.PartSaveStatus	SaveAs (string newFileName)
	Creates copy of target part. More...

unsafe void	SaveBookmark (string fileName, NXOpen.BasePart.BookmarkOption option)
	Saves a bookmark file. More...

unsafe void	SetMakeUniqueName (string newUniqueName)
	Sets the unique name on part for the Make Unique operation More...

unsafe void	Undisplay ()
	Undisplays the part, if it is currently a displayed part. More...

Public Member Functions inherited from NXOpen.NXObject
unsafe NXOpen.AttributeIterator	CreateAttributeIterator ()
	Create an attribute iterator More...

unsafe void	DeleteAllAttributesByType (NXOpen.NXObject.AttributeType type)
	Deletes all attributes of a specific type. More...

unsafe void	DeleteAllAttributesByType (NXOpen.NXObject.AttributeType type, NXOpen.Update.Option option)
	Deletes all attributes of a specific type with the option to update or not. More...

unsafe void	DeleteAttributeByTypeAndTitle (NXOpen.NXObject.AttributeType type, string title)
	Deletes an attribute by type and title. More...

unsafe void	DeleteAttributeByTypeAndTitle (NXOpen.NXObject.AttributeType type, string title, NXOpen.Update.Option option)
	Deletes an attribute by type and title with the option to update or not. More...

unsafe void	DeleteUserAttribute (NXOpen.NXObject.AttributeType type, string title, bool deleteEntireArray, NXOpen.Update.Option option)
	Deletes the first attribute encountered with the given Type, Title. More...

unsafe void	DeleteUserAttributes (NXOpen.AttributeIterator iterator, NXOpen.Update.Option option)
	Deletes the attributes on the object, if any, that satisfy the given iterator More...

unsafe void	DeleteUserAttributes (NXOpen.NXObject.AttributeType type, NXOpen.Update.Option option)
	Deletes the attributes encountered with the given Type with option to update or not. More...

unsafe NXOpen.INXObject	FindObject (string journalIdentifier)
	Finds the NXOpen.NXObject with the given identifier as recorded in a journal. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetAttributeTitlesByType (NXOpen.NXObject.AttributeType type)
	Gets all the attribute titles of a specific type. More...

unsafe bool	GetBooleanUserAttribute (string title, int index)
	Gets a boolean attribute by Title and array Index. More...

unsafe NXOpen.NXObject.ComputationalTime	GetComputationalTimeUserAttribute (string title, int index)
	Gets a time attribute by Title and array Index. More...

unsafe int	GetIntegerAttribute (string title)
	Gets an integer attribute by title. More...

unsafe int	GetIntegerUserAttribute (string title, int index)
	Gets an integer attribute by Title and array Index. More...

unsafe bool	GetNextUserAttribute (NXOpen.AttributeIterator iterator, out NXOpen.NXObject.AttributeInformation info)
	Gets the next attribute encountered on the object, if any, that satisfies the given iterator. More...

unsafe string	GetPdmReferenceAttributeValue (string attributeTitle)
	Gets the value of PDM Reference attribute for given object. More...

unsafe double	GetRealAttribute (string title)
	Gets a real attribute by title. More...

unsafe double	GetRealUserAttribute (string title, int index)
	Gets a real attribute by Title and array Index. More...

unsafe string	GetReferenceAttribute (string title)
	Gets the reference string (not the calculated value) of a string attribute that uses a reference string. More...

unsafe string	GetStringAttribute (string title)
	Gets a string attribute value by title. More...

unsafe string	GetStringUserAttribute (string title, int index)
	Gets a string attribute by Title and array Index. More...

unsafe string	GetTimeAttribute (NXOpen.NXObject.DateAndTimeFormat format, string title)
	Gets a time attribute by title. More...

unsafe string	GetTimeUserAttribute (string title, int index)
	Gets a time attribute by Title and array Index. More...

unsafe NXOpen.NXObject.AttributeInformation	GetUserAttribute (string title, NXOpen.NXObject.AttributeType type, int index)
	Gets the first attribute encountered on the object, if any, with a given Title, Type and array Index. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttribute (string title, bool includeUnset, bool addStringValues, NXOpen.NXObject.AttributeType type)
	Gets the first attribute (or attribute array) encountered on the object, if any, with a given Title and Type. More...

unsafe string	GetUserAttributeAsString (string title, NXOpen.NXObject.AttributeType type, int index)
	Gets the first attribute encountered on the object, if any, with a given title, type and array index. More...

unsafe int	GetUserAttributeCount (NXOpen.AttributeIterator iterator)
	Gets the count of set attributes on the object, if any, that satisfy the given iterator. More...

unsafe int	GetUserAttributeCount (NXOpen.AttributeIterator iterator, bool countArrayAsOneAttribute)
	Gets the count of set attributes on the object, if any, that satisfy the given iterator. More...

unsafe int	GetUserAttributeCount (NXOpen.NXObject.AttributeType type)
	Gets the count of set attributes on the object, if any, of the given type. More...

unsafe int	GetUserAttributeCount (NXOpen.NXObject.AttributeType type, bool includeUnset, bool countArrayAsOneAttribute)
	Gets the count of attributes on the object, if any, of the given type. More...

unsafe bool	GetUserAttributeLock (string title, NXOpen.NXObject.AttributeType type)
	Determine the lock of the given attribute. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttributes (NXOpen.AttributeIterator iterator)
	Gets all the attributes that have been set on the given object, if any, that satisfy the given iterator. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttributes ()
	Gets all the attributes that have been set on the given object. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttributes (bool includeUnset)
	Gets all the attributes of the given object. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttributes (bool includeUnset, bool addStringValues)
	Gets all the attributes of the given object. More...

unsafe string[]	GetUserAttributesAsStrings ()
	Gets all the attributes that have been set on the given object. More...

unsafe int	GetUserAttributeSize (string title, NXOpen.NXObject.AttributeType type)
	Gets the size of the first attribute encountered on the object, if any, with a given Title and Type. More...

unsafe NXOpen.NXObject[]	GetUserAttributeSourceObjects ()
	Returns an array of objects from which this object presents attributes. More...

unsafe bool	HasUserAttribute (NXOpen.AttributeIterator iterator)
	Determines if an attribute exists on the object, that satisfies the given iterator More...

unsafe bool	HasUserAttribute (string title, NXOpen.NXObject.AttributeType type, int index)
	Determines if an attribute with the given Title, Type and array Index is present on the object Unset attributes will not be detected by this function, as its purpose is to test for the actual presence of the attribute on the object. More...

unsafe void	Print ()
	Prints a representation of this object to the system log file. More...

unsafe void	SetAttribute (string title, int value)
	Creates or modifies an integer attribute. More...

unsafe void	SetAttribute (string title, int value, NXOpen.Update.Option option)
	Creates or modifies an integer attribute with the option to update or not. More...

unsafe void	SetAttribute (string title, double value)
	Creates or modifies a real attribute. More...

unsafe void	SetAttribute (string title, double value, NXOpen.Update.Option option)
	Creates or modifies a real attribute with the option to update or not. More...

unsafe void	SetAttribute (string title, string value)
	Creates or modifies a string attribute. More...

unsafe void	SetAttribute (string title, string value, NXOpen.Update.Option option)
	Creates or modifies a string attribute with the option to update or not. More...

unsafe void	SetAttribute (string title)
	Creates or modifies a null attribute which is an attribute with a title and no value. More...

unsafe void	SetAttribute (string title, NXOpen.Update.Option option)
	Creates or modifies a null attribute with the option to update or not. More...

unsafe void	SetBooleanUserAttribute (string title, int index, bool value, NXOpen.Update.Option option)
	Creates or modifies a boolean attribute with the option to update or not. More...

unsafe void	SetName (string name)
	Sets the custom name of the object. More...

unsafe void	SetPdmReferenceAttribute (string attributeTitle, string attributeValue)
	Sets the value of PDM Reference attribute on the object. More...

unsafe void	SetReferenceAttribute (string title, string value)
	Creates or modifies a string attribute which uses a reference string. More...

unsafe void	SetReferenceAttribute (string title, string value, NXOpen.Update.Option option)
	Creates or modifies a string attribute which uses a reference string, with the option to update or not. More...

unsafe void	SetTimeAttribute (string title, string value)
	Creates or modifies a time attribute. More...

unsafe void	SetTimeAttribute (string title, string value, NXOpen.Update.Option option)
	Creates or modifies a time attribute with the option to update or not. More...

unsafe void	SetTimeUserAttribute (string title, int index, string value, NXOpen.Update.Option option)
	Creates or modifies a time attribute with the option to update or not. More...

unsafe void	SetTimeUserAttribute (string title, int index, NXOpen.NXObject.ComputationalTime value, NXOpen.Update.Option option)
	Creates or modifies a time attribute with the option to update or not. More...

unsafe void	SetUserAttribute (NXOpen.NXObject.AttributeInformation info, NXOpen.Update.Option option)
	Creates or modifies an attribute with the option to update or not. More...

unsafe void	SetUserAttribute (string title, int index, int value, NXOpen.Update.Option option)
	Creates or modifies an integer attribute with the option to update or not. More...

unsafe void	SetUserAttribute (string title, int index, double value, NXOpen.Update.Option option)
	Creates or modifies a real attribute with the option to update or not. More...

unsafe void	SetUserAttribute (string title, int index, string value, NXOpen.Update.Option option)
	Creates or modifies a string attribute with the option to update or not. More...

unsafe void	SetUserAttribute (string title, int index, NXOpen.Update.Option option)
	Creates or modifies a null attribute with the option to update or not. More...

unsafe void	SetUserAttributeLock (string title, NXOpen.NXObject.AttributeType type, bool @lock)
	Lock or unlock the given attribute. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.Part	MasterCadPart `[get]`
	Returns the master cad part associated with the assembly fem part More...

Properties inherited from NXOpen.CAE.BaseFemPart
unsafe NXOpen.CAE.BaseFEModel	BaseFEModel `[get]`
	Returns the femodel NXOpen.CAE.BaseFEModel associated with the part More...

NXOpen.CAE.BodyCollection	Bodies `[get]`
	Returns the BodyCollection instance belonging to this part More...

unsafe string	FullPathForAssociatedCadPart `[get]`
	Returns the full pathname of the associated cad part More...

NXOpen.CAE.SketchCurvesCollection	SketchCurves `[get]`
	Returns the Sketch Curves collection belonging to the part More...

unsafe bool	UseCyclicSymmetryCsys `[get]`
	Returns the use cyclic symmetry csys flag More...

Properties inherited from NXOpen.CAE.CaePart
NXOpen.CAE.AtvSetCollection	AtvSets `[get]`
	Contains a NXOpen.CAE.AtvSetCollection . More...

NXOpen.CAE.BeamSectionsCollection	BeamSections `[get]`
	Returns the Beam Section collection belonging to the part More...

NXOpen.CAE.CaeGroupCollection	CaeGroups `[get]`
	Returns the CAE Group collection belonging to this Part More...

NXOpen.CAE.NoteCollection	CaeNoteCollection `[get]`
	Contains a cae note collection. More...

NXOpen.CAE.QueryCurveManager	CaeQueryCurves `[get]`
	Returns the CAE query curve manager belonging to this Part More...

NXOpen.CAE.ModelCheck.ElementQualitySettingCollection	ElementQualitySettings `[get]`
	Returns the element quality settings collection belonging to this CAE Part More...

NXOpen.CAE.FrfSetCollection	FrfSets `[get]`
	Contains a NXOpen.CAE.FrfSetCollection . More...

NXOpen.CAE.LayoutStateCollection	LayoutStates `[get]`
	Contains a NXOpen.CAE.LayoutStateCollection . More...

NXOpen.CAE.AeroStructures.MarginAnnotCollection	MarginAnnotationCollection `[get]`
	Contains a margin annotation collection. More...

NXOpen.CAE.MeshControlDisplayManager	MeshControlDisplayMgr `[get]`
	Returns the mesh control display manager belonging to this IFem More...

NXOpen.CAE.ModelCheckManager	ModelCheckMgr `[get]`
	Returns the select element manager belonging to this IFem More...

NXOpen.CAE.ModelingObjectPropertyTableCollection	ModelingObjectPropertyTables `[get]`
	Returns the modeling object property table collection belonging to this CAE Part More...

NXOpen.CAE.ModeSetCollection	ModeSets `[get]`
	Contains a NXOpen.CAE.ModeSetCollection . More...

NXOpen.CAE.NodeElementInfoManager	NodeElementInfoMgr `[get]`
	Returns the node element info manager belonging to this IFem More...

NXOpen.CAE.NoteManager	Notes `[get]`
	Contains a cae annotation manager. More...

NXOpen.CAE.PhysicalPropertyTableCollection	PhysicalPropertyTables `[get]`
	Returns the physical property table collection belonging to this CAE Part More...

NXOpen.CAE.PostEnvironmentsManager	PostEnvironmentsMgr `[get]`
	Contains a NXOpen.CAE.PostEnvironmentsManager . More...

NXOpen.CAE.PostScenarioManager	PostScenarioMgr `[get]`
	Contains a NXOpen.CAE.PostScenarioManager . More...

NXOpen.CAE.SelectElementsManager	SelectElementMgr `[get]`
	Returns the select element manager belonging to this IFem More...

NXOpen.CAE.SelectGroupsManager	SelectGroupsMgr `[get]`
	Returns the groups element manager belonging to this IFem More...

NXOpen.CAE.SelectionRecipeCollection	SelectionRecipes `[get]`
	Contains a NXOpen.CAE.SelectionRecipeCollection . More...

NXOpen.CAE.ShowHideManager	ShowHideMgr `[get]`
	Returns the show hide manager belonging to the part More...

NXOpen.CAE.SmartSelectionManager	SmartSelectionMgr `[get]`
	Returns the smart selection manager belonging to this part More...

NXOpen.CAE.VatvSetCollection	VatvSets `[get]`
	Contains a NXOpen.CAE.VatvSetCollection . More...

Properties inherited from NXOpen.BasePart
NXOpen.GeometricAnalysis.AnalysisManager	AnalysisManager `[get]`
	Returns the GeometricAnalysisManager for part More...

NXOpen.Validate.AnalysisResultCollection	AnalysisResults `[get]`
	Returns the AnalysisResultCollection instance belonging to this part More...

NXOpen.Display.AnimationCameraCollection	AnimationCameras `[get]`
	Returns the Display. More...

NXOpen.Annotations.AnnotationManager	Annotations `[get]`
	Returns the PMI Annotation Manager for part More...

NXOpen.ArcCollection	Arcs `[get]`
	Returns the ArcCollection instance belonging to this part More...

NXOpen.Assemblies.ProductOutlineManager	Assemblies `[get]`
	Returns the NXOpen.Assemblies.ProductOutlineManager belonging to this session More...

NXOpen.Assemblies.AssemblyManager	AssemblyManager `[get]`
	Returns the NXOpen.Assemblies.AssemblyManager belonging to this session More...

NXOpen.AxisCollection	Axes `[get]`
	Returns the AxisCollection instance belonging to this part More...

NXOpen.Features.BaseFeatureCollection	BaseFeatures `[get]`
	Returns the FeatureCollection instance belonging to this part More...

NXOpen.CAE.ViewLayoutManager	CaeViewLayoutManager `[get]`
	Returns the CAE. More...

NXOpen.Display.CameraCollection	Cameras `[get]`
	Returns the Display. More...

NXOpen.CAM.CAMFeatureCollection	CAMFeatures `[get]`
	Returns the CAMFeatureCollection instance belonging to this part More...

NXOpen.Display.CgfxAttrCollection	CgfxAttrs `[get]`
	Returns the Display. More...

NXOpen.Display.CgfxMattexCollection	CgfxMattex `[get]`
	Returns the Display. More...

NXOpen.ColorManager	Colors `[get]`
	Manages the standard NX colors More...

unsafe NXOpen.Assemblies.ComponentAssembly	ComponentAssembly `[get]`
	Returns the component assembly. More...

NXOpen.Drawings.ConvertToPMIBuilderManager	ConvertToPMIBuilderManager `[get]`
	Returns the Drawings. More...

NXOpen.CoordinateSystemCollection	CoordinateSystems `[get]`
	Returns the CoordinateSystemCollection instance belonging to this part More...

NXOpen.CurveCollection	Curves `[get]`
	Returns the CurveCollection instance belonging to this part More...

NXOpen.DatumCollection	Datums `[get]`
	Returns the DatumCollection instance belonging to this part More...

NXOpen.Display.DecalCollection	Decals `[get]`
	Returns the Display. More...

NXOpen.Optimization.DesignStudyCollection	DesignStudy `[get]`
	Returns the design study instance belonging to this part More...

NXOpen.DirectionCollection	Directions `[get]`
	Returns the DirectionCollection instance belonging to this part More...

unsafe bool	Displayed `[get]`
	Returns true if the part represents a displayed part. More...

NXOpen.Display.DynamicSectionCollection	DynamicSections `[get]`
	Returns the Display. More...

NXOpen.EllipseCollection	Ellipses `[get]`
	Returns the EllipseCollection instance belonging to this part More...

NXOpen.ExpressionGroupCollection	ExpressionGroups `[get]`
	Returns the ExpressionGroupCollection instance belonging to this part More...

NXOpen.ExpressionCollection	Expressions `[get]`
	Returns the ExpressionCollection instance belonging to this part More...

NXOpen.ExternalFileReferenceManager	ExternalFileReferenceManager `[get]`
	Returns the NXOpen.ExternalFileReferenceManager belonging to this part More...

NXOpen.Features.FeatureCollection	Features `[get]`
	Returns the FeatureCollection instance belonging to this part More...

unsafe NXOpen.Fields.FieldManager	FieldManager `[get]`
	Returns the field main. More...

NXOpen.FontCollection	Fonts `[get]`
	Returns the FontCollection instance belonging to this part More...

unsafe string	FullPath `[get]`
	Returns the full path of the part. More...

NXOpen.CAE.FunctionCollection	Functions `[get]`
	Returns the CAE. More...

NXOpen.Display.GridCollection	Grids `[get]`
	Returns the Display. More...

unsafe bool	HasWriteAccess `[get]`
	Returns the write-access status of a part independent of the load state. More...

NXOpen.HyperbolaCollection	Hyperbolas `[get]`
	Returns the HyperbolaCollection instance belonging to this part More...

NXOpen.Gateway.ImageCaptureManager	ImageCaptureManager `[get]`
	Returns the Gateway. More...

NXOpen.Display.ImageCollection	Images `[get]`
	Returns the Display. More...

NXOpen.Display.ImageDataCollection	ImagesData `[get]`
	Returns the Display. More...

NXOpen.InfiniteLineCollection	InfiniteLines `[get]`
	Returns the InfiniteLineCollection instance belonging to this part More...

unsafe bool	IsDesignReviewPart `[get]`
	Returns the status on whether input part is design review part or not. More...

unsafe bool	IsFullyLoaded `[get]`
	Returns the load status of a part. More...

unsafe bool	IsModified `[get]`
	Returns the modified status of a part. More...

unsafe bool	IsReadOnly `[get]`
	Returns the read-only status of a part. More...

NXOpen.Layer.CategoryCollection	LayerCategories `[get]`
	Returns a collection of layer categories More...

NXOpen.Layer.LayerManager	Layers `[get]`
	Returns the LayerManager for this part More...

NXOpen.LayoutCollection	Layouts `[get]`
	Returns the LayoutCollection instance belonging to this part More...

unsafe string	Leaf `[get]`
	Returns the leaf name of the part. More...

NXOpen.LightCollection	Lights `[get]`
	Returns the LightCollection instance belonging to this part More...

NXOpen.LineCollection	Lines `[get]`
	Returns the LineCollection instance belonging to this part More...

NXOpen.MaterialManager	MaterialManager `[get]`
	Returns the Material Manager belonging to this Part More...

NXOpen.MeasureManager	MeasureManager `[get]`
	Returns the measure manager for this part More...

NXOpen.ModelingViewCollection	ModelingViews `[get]`
	Returns the ModelingViewCollection instance belonging to this part More...

NXOpen.NXMatrixCollection	NXMatrices `[get]`
	Returns the NXMatrixCollection instance belonging to this part More...

NXOpen.OffsetCollection	Offsets `[get]`
	Returns the OffsetCollection instance belonging to this part More...

NXOpen.Optimization.OptimizationCollection	Optimization `[get]`
	Returns the optimization instance belonging to this part More...

NXOpen.ParabolaCollection	Parabolas `[get]`
	Returns the ParabolaCollection instance belonging to this part More...

NXOpen.ParamLibParameterLibraryManager	ParameterLibraryManager `[get]`
	Returns the Parameter Library Manager belonging to this Part More...

NXOpen.ParameterTableCollection	ParameterTables `[get]`
	Returns the ParameterTableCollection instance belonging to this part More...

unsafe NXOpen.PartLoadState	PartLoadState `[get]`
	Returns the load state of a part. More...

unsafe NXOpen.BasePart.PartPreview	PartPreviewMode `[get, set]`
	Returns or sets the preview mode More...

unsafe NXOpen.BasePart.Units	PartUnits `[get]`
	Returns the units of the part file. More...

NXOpen.PDM.PdmPart	PDMPart `[get]`
	Returns the instance of the PDM. More...

NXOpen.Validate.PersistentResultCollection	PersistentResults `[get]`
	Returns the PersistentResultCollection instance belonging to this part More...

NXOpen.PlaneCollection	Planes `[get]`
	Return a collection of Planes More...

NXOpen.PlotManager	PlotManager `[get]`
	Returns the PlotManager instance belonging to this part More...

NXOpen.Display.PointCloudCollection	PointClouds `[get]`
	Returns the Display. More...

NXOpen.PointCollection	Points `[get]`
	Returns the PointCollection instance belonging to this part More...

NXOpen.PolylineCollection	Polylines `[get]`
	Returns the PolylineCollection instance belonging to this part More...

NXOpen.Preferences.PartPreferences	Preferences `[get]`
	Returns the PartPreferences instance belonging to this part More...

NXOpen.PropertiesManager	PropertiesManager `[get]`
	Returns the PropertiesManager instance belonging to this part More...

NXOpen.Validate.RequirementCheckCollection	RequirementChecks `[get]`
	Returns the RequirementCheckCollection instance belonging to this part More...

NXOpen.Validate.RequirementCollection	Requirements `[get]`
	Returns the RequirementCollection instance belonging to this part More...

NXOpen.RuleManager	RuleManager `[get]`
	Returns the rule manager for this part More...

unsafe bool	SaveDisplayFacets `[get, set]`
	Returns or sets whether display quality facets are saved in the part file More...

NXOpen.PartSaveOptions	SaveOptions `[get]`
	Returns the PartSaveOptions instance belonging to this part More...

NXOpen.ScalarCollection	Scalars `[get]`
	Returns the ScalarCollection instance belonging to this part More...

NXOpen.ScCollectorCollection	ScCollectors `[get]`
	Returns the ScCollectorCollection instance belonging to this part More...

NXOpen.ScRuleFactory	ScRuleFactory `[get]`
	Returns the ScRuleFactory instance belonging to this part More...

NXOpen.SectionCollection	Sections `[get]`
	Returns the SectionCollection instance belonging to this part More...

NXOpen.Display.SelPrefCollection	SelPref `[get]`
	Returns the Display. More...

NXOpen.Display.TrueShadingCollection	SHEDObjs `[get]`
	Returns the Display. More...

NXOpen.SplineCollection	Splines `[get]`
	Returns the SplineCollection instance belonging to this part More...

NXOpen.Display.TrueStudioCollection	TrueStudioObjs `[get]`
	Returns the Display. More...

unsafe string	UniqueIdentifier `[get, set]`
	Returns or sets the unique identifier for this part used to determine whether parts can be quietly substituted during part open. More...

NXOpen.UnitCollection	UnitCollection `[get]`
	Returns a collection of Units More...

NXOpen.UserDefinedObjects.UserDefinedObjectManager	UserDefinedObjectManager `[get]`
	Returns the NXOpen.UserDefinedObjects.UserDefinedObjectManager belonging to this session More...

NXOpen.ValidationCollection	Validations `[get]`
	Returns the validation for this part More...

NXOpen.ViewCollection	Views `[get]`
	Returns the ViewCollection instance belonging to this part More...

NXOpen.WCS	WCS `[get]`
	Returns the WCS instance belonging to this part More...

NXOpen.XformCollection	Xforms `[get]`
	Returns the XformCollection instance belonging to this part More...

Properties inherited from NXOpen.NXObject
unsafe bool	IsOccurrence `[get]`
	Returns whether this object is an occurrence or not. More...

unsafe string	JournalIdentifier `[get]`
	Returns the identifier that would be recorded in a journal for this object. More...

unsafe string	Name `[get]`
	Returns the custom name of the object. More...

unsafe NXOpen.Assemblies.Component	OwningComponent `[get]`
	Returns the owning component, if this object is an occurrence. More...

unsafe NXOpen.BasePart	OwningPart `[get]`
	Returns the owning part of this object More...

unsafe NXOpen.INXObject	Prototype `[get]`
	Returns the prototype of this object if it is an occurrence. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Properties inherited from NXOpen.INXObject
bool	IsOccurrence `[get]`
	Returns whether this object is an occurrence or not. More...

string	JournalIdentifier `[get]`
	Returns the identifier that would be recorded in a journal for this object. More...

string	Name `[get]`
	Returns the custom name of the object. More...

NXOpen.Assemblies.Component	OwningComponent `[get]`
	Returns the owning component, if this object is an occurrence. More...

NXOpen.BasePart	OwningPart `[get]`
	Returns the owning part of this object More...

NXOpen.INXObject	Prototype `[get]`
	Returns the prototype of this object if it is an occurrence. More...

Additional Inherited Members
Public Types inherited from NXOpen.CAE.BaseFemPart
enum	AxisymAbstractionType { None, ZxPlane, XyPlane, XxyPlane }
	Used to specify the axisymmetric abstraction type during Fempart creation . More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents an NX part of type .afm.

Use the NXOpen.PartCollection class to load or create a part.

Created in NX6.0.0

Member Function Documentation

unsafe void NXOpen.CAE.AssyFemPart.FinalizeCreation	(	NXOpen.Part	cadPart,
		string	solverTypeName,
		string	analysisTypeType,
		NXOpen.CAE.BaseFemPart.AxisymAbstractionType	abstractionType,
		string[]	description,
		bool	useCyclicSymmetryCSYS,
		NXOpen.CoordinateSystem	cyclicSymmetryCsys
	)

inline

Finalizes the creation of the assembly fem part file.

This method should be called immediately after creating the assembly fem part file. This method should be called only once for each assembly fem part file. The second call to the method will raise an error.

Created in NX11.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

cadPart	the cad part to be associated with the fem part
solverTypeName	the name of the solver. Refer to NX help for more information
analysisTypeType	the name of the analysis type. Refer to NX help for more information
abstractionType	the axisymmetric abstraction type. Refer to NX help for more information
description	description
useCyclicSymmetryCSYS	Use the selected cyclic symmetry csys or not
cyclicSymmetryCsys	tag of selected cyclic symmetry or null

unsafe void NXOpen.CAE.AssyFemPart.FinalizeCreation	(	NXOpen.Part	cadPart,
		string	solverTypeName,
		string	analysisTypeType,
		NXOpen.CAE.BaseFemPart.AxisymAbstractionType	abstractionType,
		string[]	description
	)

inline

Finalizes the creation of the assembly fem part file.

This method should be called immediately after creating the assembly fem part file. This method should be called only once for each assembly fem part file. The second call to the method will raise an error.

Created in NX9.0.0

Deprecated in NX11.0.0. Use NXOpen.CAE.AssyFemPart.FinalizeCreation that includes CyclicSymmetryCSYS instead.

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

cadPart	the cad part to be associated with the fem part
solverTypeName	the name of the solver. Refer to NX help for more information
analysisTypeType	the name of the analysis type. Refer to NX help for more information
abstractionType	the axisymmetric abstraction type. Refer to NX help for more information
description	description

unsafe void NXOpen.CAE.AssyFemPart.FinalizeCreation	(	NXOpen.Part	cadPart,
		string	solverTypeName,
		string	analysisTypeType,
		string[]	description
	)

inline

Finalizes the creation of the assembly fem part file.

This method should be called immediately after creating the assembly fem part file. This method should be called only once for each assembly fem part file. The second call to the method will raise an error. Axisymmetric abstraction type is set internally using pre-nx9 techniques using solver name and analysis type.

Created in NX6.0.0

Deprecated in NX9.0.0. Use NXOpen.CAE.AssyFemPart.FinalizeCreation that includes abstraction type instead.

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

cadPart	the cad part to be associated with the fem part
solverTypeName	the name of the solver. Refer to NX help for more information
analysisTypeType	the name of the analysis type. Refer to NX help for more information
description	description

Property Documentation

unsafe NXOpen.Part NXOpen.CAE.AssyFemPart.MasterCadPart

get

Returns the master cad part associated with the assembly fem part

Created in NX6.0.0

License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

The documentation for this class was generated from the following file:

CAE_AssyFemPart.cs

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Function Documentation

Property Documentation