This class provides Model Display Data Support More...

Inheritance diagram for NXOpen.CAE.ModelDisplayBuilder:

Classes
struct	_ConnectionDisplayParameters
	Display parameters of a connection

struct	ConnectionDisplayParameters
	Display parameters of a connection More...

Public Types
enum	ConnectionFlangeCount { TwoFlanges = 2, ThreeFlanges, FourFlanges, Other }
	Number of flanges of a connection More...

enum	ConnectionStatus { Realized = 1, NotRealized, Invalid }
	Status of a connection More...

enum	ElemQualPass { Shaded, Wireframe }
	specifies display style for elements which pass the element quality check More...

enum	ElmClrBasis { Default, PhysicalPropertyTable, MaterialPropertyTable, ElemCollContainer, ElemColl, ElemQualityCheck, GroupElem, GroupElemFace, ProtoElemColl, SolverSpecific }
	Indicates element color basis. More...

enum	ElmDispQuality { Coarse, Medium, Fine }
	Indicates element display quality. More...

enum	FreeEdgeFont { Solid, Dashed, Phantom, Centerline, Dotted, LongDashed, DottedDashed, Eight, Nine, Ten, Eleven }
	specifies the object font for geometry free edges More...

enum	FreeEdgeMarker { None, Plus, Dot, Asterisk, Circle, Poundsign, Cross, Square, Triangle, Diamond, CenterLine }
	specifies the marker for endpoints of geometry free edges More...

enum	FreeEdgeWidth { Thin, Normal, Thick, One = 5, Two, Three, Four, Five, Six, Seven, Eight, Nine }
	specifies object width for display for geometry free edges More...

enum	NodeDisplayModeType { Implicit, Explicit }
	Indicates node display mode type. More...

enum	NodeMarkerType { None, Dot, Asterisk, FilledCircle, BigAsterisk }
	Indicates node marker display symbol type. More...

enum	NodeMeshShowHideOptionType { Exterior, All, None }
	Indicates which nodes to include for meshes in show and hide commands. More...

enum	NodeUnattachedMarkerType { None, Dot, Asterisk, FilledCircle, BigAsterisk }
	Indicates unattached node marker display symbol type. More...

enum	RotationAxisLineFont { Solid, Dashed, Phantom, Centerline, Dotted, LongDashed, DottedDashed, Eight, Nine, Ten, Eleven }
	specifies the object font for model rotation axis More...

enum	RotationAxisWidth { Thin, Normal, Thick, One = 5, Two, Three, Four, Five, Six, Seven, Eight, Nine }
	specifies object width for display for model rotation axis More...

enum	StitchedEdgeFont { Solid, Dashed, Phantom, Centerline, Dotted, LongDashed, DottedDashed, Eight, Nine, Ten, Eleven }
	specifies the object font for geometry free edges More...

enum	StitchedEdgeMarker { None, Plus, Dot, Asterisk, Circle, Poundsign, Cross, Square, Triangle, Diamond, CenterLine }
	specifies the marker for endpoints of geometry free edges More...

enum	StitchedEdgeWidth { Thin, Normal, Thick, One = 5, Two, Three, Four, Five, Six, Seven, Eight, Nine }
	specifies object width for display for geometry stitched edges More...

enum	UniversalConnectionVisualizationSettingsType { None, ByType, ByDiameter, ByFlangeCount, ByStatus }
	The type of visualization settings for universal connections More...

Public Member Functions
unsafe void	AddDisplayParametersByDiameter (NXOpen.Expression minimum, NXOpen.Expression maximum, NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters parameters)
	Add display parameters for universal connections based on diameter. More...

unsafe NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	GetDisplayParametersByConnectionType (NXOpen.CAE.Connections.ConnectionType connectionType)
	Gets display parameters for universal connections based on type. More...

unsafe NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	GetDisplayParametersByFlangeCount (NXOpen.CAE.ModelDisplayBuilder.ConnectionFlangeCount flangeCount)
	Gets display parameters for universal connections based on flange count. More...

unsafe NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	GetDisplayParametersByStatus (NXOpen.CAE.ModelDisplayBuilder.ConnectionStatus status)
	Gets display parameters for universal connections based on status. More...

unsafe NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	GetParametersByDiameterRangeIndex (int index, out NXOpen.Expression minimum, out NXOpen.Expression maximum)
	Gets display parameters for universal connections based on the index from the diameter range list. More...

unsafe void	RemoveDiameterRange (int index)
	Update display parameters for universal connections based on the index from the diameter range list. More...

unsafe void	SetColorsOnMeshes ()
	This method will set the colors from the current element color cycler on all of the meshes in the model. More...

unsafe void	SetDisplayParametersByConnectionType (NXOpen.CAE.Connections.ConnectionType connectionType, NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters parameters)
	Sets display parameters for universal connections based on type. More...

unsafe void	SetDisplayParametersByFlangeCount (NXOpen.CAE.ModelDisplayBuilder.ConnectionFlangeCount flangeCount, NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters parameters)
	Sets display parameters for universal connections based on flange count. More...

unsafe void	SetDisplayParametersByStatus (NXOpen.CAE.ModelDisplayBuilder.ConnectionStatus status, NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters parameters)
	Sets display parameters for universal connections based on status. More...

unsafe void	UpdateParametersByDiameterRangeIndex (int index, NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters parameters)
	Update display parameters for universal connections based on the index from the diameter range list. More...

Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...

unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...

unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe NXOpen.CAE.ModelDisplayBuilder.ElmClrBasis	ElementColorCycler `[get, set]`
	Returns or sets the element color cycler basis More...

unsafe NXOpen.CAE.ModelDisplayBuilder.ElmDispQuality	ElementDisplayQuality `[get, set]`
	Returns or sets the element display quality setting More...

unsafe bool	ElementSelectInternal `[get, set]`
	Returns or sets the element select internal switch More...

unsafe NXOpen.NXColor	ElemMaterialDisplayLaminateColor `[get, set]`
	Returns or sets the element material laminate element color More...

unsafe NXOpen.NXColor	ElemMaterialDisplayNoMaterialColor `[get, set]`
	Returns or sets the element material no material element color More...

unsafe NXOpen.NXColor	ElemQualFailColor `[get, set]`
	Returns or sets the element quality check failing element color More...

unsafe NXOpen.NXColor	ElemQualFailShadedBorderColor `[get, set]`
	Returns or sets the element quality check failing shaded element border color More...

unsafe NXOpen.NXColor	ElemQualPassColor `[get, set]`
	Returns or sets the element quality check passing element color More...

unsafe int	ElemQualPassTranslucency `[get, set]`
	Returns or sets the element quality check passing element translucency. More...

unsafe NXOpen.CAE.ModelDisplayBuilder.ElemQualPass	ElemQualPassType `[get, set]`
	Returns or sets the element quality check passing element display type More...

unsafe bool	GeomDisplayFreeEdges `[get, set]`
	Returns or sets the geometry display free edges switch More...

unsafe bool	GeomDisplayStitchedEdges `[get, set]`
	Returns or sets the geometry display stitched edges switch More...

unsafe bool	GeomFaceResolveDisplayContention `[get, set]`
	Returns or sets the geometry face resolve mesh display contention switch More...

unsafe NXOpen.NXColor	GeomFreeEdgeColor `[get, set]`
	Returns or sets the geometry display free edges color More...

unsafe NXOpen.CAE.ModelDisplayBuilder.FreeEdgeMarker	GeomFreeEdgeEndMarker `[get, set]`
	Returns or sets the marker for endpoints of geometry free edges More...

unsafe NXOpen.CAE.ModelDisplayBuilder.FreeEdgeFont	GeomFreeEdgeFont `[get, set]`
	Returns or sets the geometry free edge font More...

unsafe NXOpen.CAE.ModelDisplayBuilder.FreeEdgeWidth	GeomFreeEdgeLineWidth `[get, set]`
	Returns or sets the geometry free edge line width More...

unsafe NXOpen.NXColor	GeomStitchedEdgeColor `[get, set]`
	Returns or sets the geometry display stitched edges color More...

unsafe NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeMarker	GeomStitchedEdgeEndMarker `[get, set]`
	Returns or sets the marker for endpoints of geometry stitched edges More...

unsafe NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeFont	GeomStitchedEdgeFont `[get, set]`
	Returns or sets the geometry stitched edge font More...

unsafe NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeWidth	GeomStitchedEdgeLineWidth `[get, set]`
	Returns or sets the geometry stitched edge line width More...

unsafe NXOpen.NXColor	GroupElemFaceMultiGroupColor `[get, set]`
	Returns or sets the group element face multiple group color More...

unsafe NXOpen.NXColor	GroupElemFaceNoGroupColor `[get, set]`
	Returns or sets the group element face no group color More...

unsafe NXOpen.NXColor	GroupElemMultiGroupColor `[get, set]`
	Returns or sets the group element multiple group color More...

unsafe NXOpen.NXColor	GroupElemNoGroupColor `[get, set]`
	Returns or sets the group element no group color More...

unsafe NXOpen.NXColor	NodeColor `[get, set]`
	Returns or sets the node color More...

unsafe NXOpen.CAE.ModelDisplayBuilder.NodeDisplayModeType	NodeDisplayMode `[get, set]`
	Returns or sets the node display mode type More...

unsafe NXOpen.CAE.ModelDisplayBuilder.NodeMarkerType	NodeMarker `[get, set]`
	Returns or sets the node marker display symbol type More...

unsafe NXOpen.CAE.ModelDisplayBuilder.NodeMeshShowHideOptionType	NodeMeshShowHideOption `[get, set]`
	Returns or sets the nodes to include for meshes in the show and hide commands More...

unsafe bool	NodeSelectInternal `[get, set]`
	Returns or sets the node select internal switch More...

unsafe NXOpen.CAE.ModelDisplayBuilder.NodeUnattachedMarkerType	NodeUnattachedMarker `[get, set]`
	Returns or sets the unattached node marker display symbol type More...

unsafe int	NumberOfDiameterRanges `[get]`
	Returns the number of diameter ranges. More...

unsafe NXOpen.NXColor	RotationAxisColor `[get, set]`
	Returns or sets the model rotation axis color More...

unsafe bool	RotationAxisDisplaySwitch `[get, set]`
	Returns or sets the model rotation axis display switch More...

unsafe NXOpen.CAE.ModelDisplayBuilder.RotationAxisLineFont	RotationAxisFont `[get, set]`
	Returns or sets the model rotation axis font More...

unsafe NXOpen.CAE.ModelDisplayBuilder.RotationAxisWidth	RotationAxisLineWidth `[get, set]`
	Returns or sets the model rotation axis line width More...

unsafe string	SolverDisplayMode `[get, set]`
	Returns or sets the model's Solver Display Mode. More...

unsafe double	UnattachedNodesInBoundingBoxRatio `[get, set]`
	Returns or sets the include unattached nodes in fit switch More...

unsafe NXOpen.CAE.ModelDisplayBuilder.UniversalConnectionVisualizationSettingsType	UniversalConnectionVisualizationType `[get, set]`
	Returns or sets the universal connection visualization type. More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

This class provides Model Display Data Support

To create a new instance of this class, use NXOpen.CAE.CaePart.CreateModelDisplayBuilder

Default values.

Property

Value

ElemMaterialDisplayLaminateColor

181

ElemMaterialDisplayNoMaterialColor

130

ElemQualFailColor

186

ElemQualFailShadedBorderColor

130

ElemQualPassColor

50

ElemQualPassTranslucency

0

ElemQualPassType

Shaded

ElementColorCycler

Default

ElementDisplayQuality

Fine

ElementSelectInternal

1

GeomDisplayFreeEdges

0

GeomDisplayStitchedEdges

0

GeomFreeEdgeColor

186

GeomFreeEdgeEndMarker

Circle

GeomFreeEdgeFont

Solid

GeomFreeEdgeLineWidth

Thick

GeomStitchedEdgeColor

186

GeomStitchedEdgeEndMarker

Circle

GeomStitchedEdgeFont

Solid

GeomStitchedEdgeLineWidth

Thick

GroupElemFaceMultiGroupColor

181

GroupElemFaceNoGroupColor

130

GroupElemMultiGroupColor

181

GroupElemNoGroupColor

130

NodeMarker

None

NodeSelectInternal

1

NodeUnattachedMarker

Asterisk

RotationAxisColor

186

RotationAxisDisplaySwitch

0

RotationAxisFont

Solid

RotationAxisLineWidth

Normal

Created in NX7.5.0

Member Enumeration Documentation

enum NXOpen.CAE.ModelDisplayBuilder.ConnectionFlangeCount

Number of flanges of a connection

Enumerator
TwoFlanges	Two flanges
ThreeFlanges	Three flanges
FourFlanges	Four flanges
Other	Other flange count

enum NXOpen.CAE.ModelDisplayBuilder.ConnectionStatus

Status of a connection

Enumerator
Realized	Realized (connetion is meshed)
NotRealized	Not Realized (connetion is not meshed)
Invalid	Invalid (connection is invalid)

enum NXOpen.CAE.ModelDisplayBuilder.ElemQualPass

specifies display style for elements which pass the element quality check

Enumerator
Shaded	Draw passing elements shaded
Wireframe	Draw passing elements wireframe

enum NXOpen.CAE.ModelDisplayBuilder.ElmClrBasis

Indicates element color basis.

Enumerator
Default	Default
PhysicalPropertyTable	Physical Property Table
MaterialPropertyTable	Material Property Table
ElemCollContainer	Mesh Collector
ElemColl	Mesh
ElemQualityCheck	Element Quality Check
GroupElem	Group Element
GroupElemFace	Group Element Face
ProtoElemColl	Prototype Mesh
SolverSpecific	Solver Specific Display

enum NXOpen.CAE.ModelDisplayBuilder.ElmDispQuality

Indicates element display quality.

Enumerator
Coarse	Coarse
Medium	Medium
Fine	Fine

enum NXOpen.CAE.ModelDisplayBuilder.FreeEdgeFont

specifies the object font for geometry free edges

Enumerator
Solid	Solid font
Dashed	Dashed font
Phantom	Phantom font
Centerline	Centerline font
Dotted	Dotted font
LongDashed	Long dashed font
DottedDashed	Dotted dashed font
Eight	Long dashed double dotted
Nine	Long dashed dotted for OOTB fonts and Undulating for shipbuilding fonts
Ten	Long dashed triplicate dotted for OOTB fonts and Zigzag for shipbuilding fonts
Eleven	Long dashed double short dashed for OOTB fonts and Railway for shipbuilding fonts

enum NXOpen.CAE.ModelDisplayBuilder.FreeEdgeMarker

specifies the marker for endpoints of geometry free edges

Enumerator
None	No marker
Plus	Plus marker
Dot	Dot marker
Asterisk	Asterisk marker
Circle	Circle marker
Poundsign	Pound sign marker
Cross	Cross marker
Square	Square marker
Triangle	Triangle marker
Diamond	Diamond marker
CenterLine	Center line marker

enum NXOpen.CAE.ModelDisplayBuilder.FreeEdgeWidth

specifies object width for display for geometry free edges

Enumerator
Thin	Thin
Normal	Normal
Thick	Thick
One
Two
Three
Four
Five
Six
Seven
Eight
Nine

enum NXOpen.CAE.ModelDisplayBuilder.NodeDisplayModeType

Indicates node display mode type.

Enumerator

Implicit

Nodes are implicitly shown according to the following rules.

Nodes attached to elements are shown when the elements are shown. Unattached nodes are always shown.

Explicit

Nodes are explicitly shown and hidden via the Show/Hide commands.

enum NXOpen.CAE.ModelDisplayBuilder.NodeMarkerType

Indicates node marker display symbol type.

Enumerator
None	None
Dot	Dot
Asterisk	Asterisk
FilledCircle	Filled Circle
BigAsterisk	Big Asterisk

enum NXOpen.CAE.ModelDisplayBuilder.NodeMeshShowHideOptionType

Indicates which nodes to include for meshes in show and hide commands.

Enumerator
Exterior	Exterior
All	All
None	None

enum NXOpen.CAE.ModelDisplayBuilder.NodeUnattachedMarkerType

Indicates unattached node marker display symbol type.

Enumerator
None	None
Dot	Dot
Asterisk	Asterisk
FilledCircle	Filled Circle
BigAsterisk	Big Asterisk

enum NXOpen.CAE.ModelDisplayBuilder.RotationAxisLineFont

specifies the object font for model rotation axis

Enumerator
Solid	Solid font
Dashed	Dashed font
Phantom	Phantom font
Centerline	Centerline font
Dotted	Dotted font
LongDashed	Long dashed font
DottedDashed	Dotted dashed font
Eight	Represents Long Dashed Double Dotted
Nine	Represents Long Dashed Dotted for UG Default Fonts and Undulating for Shipbuilding Fonts
Ten	Represents Long Dashed Triplicate Dotted for UG Default Fonts and Zigzag for Shipbuilding Fonts
Eleven	Represents Long Dashed Double Short Dashed for UG Default Fonts and Railway for Shipbuilding Fonts

enum NXOpen.CAE.ModelDisplayBuilder.RotationAxisWidth

specifies object width for display for model rotation axis

Enumerator
Thin	Thin
Normal	Normal
Thick	Thick
One
Two
Three
Four
Five
Six
Seven
Eight
Nine

enum NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeFont

specifies the object font for geometry free edges

Enumerator
Solid	Solid font
Dashed	Dashed font
Phantom	Phantom font
Centerline	Centerline font
Dotted	Dotted font
LongDashed	Long dashed font
DottedDashed	Dotted dashed font
Eight	Represents Long Dashed Double Dotted
Nine	Represents Long Dashed Dotted for UG Default Fonts and Undulating for Shipbuilding Fonts
Ten	Represents Long Dashed Triplicate Dotted for UG Default Fonts and Zigzag for Shipbuilding Fonts
Eleven	Represents Long Dashed Double Short Dashed for UG Default Fonts and Railway for Shipbuilding Fonts

enum NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeMarker

specifies the marker for endpoints of geometry free edges

Enumerator
None	No marker
Plus	Plus marker
Dot	Dot marker
Asterisk	Asterisk marker
Circle	Circle marker
Poundsign	Pound sign marker
Cross	Cross marker
Square	Square marker
Triangle	Triangle marker
Diamond	Diamond marker
CenterLine	Center line marker

enum NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeWidth

specifies object width for display for geometry stitched edges

Enumerator
Thin	Thin
Normal	Normal
Thick	Thick
One
Two
Three
Four
Five
Six
Seven
Eight
Nine

enum NXOpen.CAE.ModelDisplayBuilder.UniversalConnectionVisualizationSettingsType

The type of visualization settings for universal connections

Enumerator
None	No active settings
ByType	Visualization settings by connection type
ByDiameter	Visualization settings by diameter
ByFlangeCount	Visualization settings by flange count
ByStatus	Visualization settings by status

Member Function Documentation

unsafe void NXOpen.CAE.ModelDisplayBuilder.AddDisplayParametersByDiameter	(	NXOpen.Expression	minimum,
		NXOpen.Expression	maximum,
		NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	parameters
	)

inline

Add display parameters for universal connections based on diameter.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

minimum	minimum diameter expression
maximum	maximum diameter expression
parameters	connection display parameters

unsafe NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters NXOpen.CAE.ModelDisplayBuilder.GetDisplayParametersByConnectionType ( NXOpen.CAE.Connections.ConnectionType connectionType )

inline

Gets display parameters for universal connections based on type.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

connectionType type of the connection

Returns: connection display parameters

unsafe NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters NXOpen.CAE.ModelDisplayBuilder.GetDisplayParametersByFlangeCount ( NXOpen.CAE.ModelDisplayBuilder.ConnectionFlangeCount flangeCount )

inline

Gets display parameters for universal connections based on flange count.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

flangeCount number of flanges of the connection

Returns: connection display parameters

unsafe NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters NXOpen.CAE.ModelDisplayBuilder.GetDisplayParametersByStatus ( NXOpen.CAE.ModelDisplayBuilder.ConnectionStatus status )

inline

Gets display parameters for universal connections based on status.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

status status of the connection

Returns: connection display parameters

unsafe NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters NXOpen.CAE.ModelDisplayBuilder.GetParametersByDiameterRangeIndex	(	int	index,
		out NXOpen.Expression	minimum,
		out NXOpen.Expression	maximum
	)

inline

Gets display parameters for universal connections based on the index from the diameter range list.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

index	index from the diameter range list
minimum	minimum diameter expression
maximum	maximum diameter expression

Returns: connection display parameters

unsafe void NXOpen.CAE.ModelDisplayBuilder.RemoveDiameterRange ( int index )

inline

Update display parameters for universal connections based on the index from the diameter range list.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

index index from the diameter range list

unsafe void NXOpen.CAE.ModelDisplayBuilder.SetColorsOnMeshes ( )

inline

This method will set the colors from the current element color cycler on all of the meshes in the model.

Created in NX7.5.1

License requirements: nx_masterfem ("Finite Element Modeling")

unsafe void NXOpen.CAE.ModelDisplayBuilder.SetDisplayParametersByConnectionType	(	NXOpen.CAE.Connections.ConnectionType	connectionType,
		NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	parameters
	)

inline

Sets display parameters for universal connections based on type.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

connectionType	type of the connection
parameters	connection display parameters

unsafe void NXOpen.CAE.ModelDisplayBuilder.SetDisplayParametersByFlangeCount	(	NXOpen.CAE.ModelDisplayBuilder.ConnectionFlangeCount	flangeCount,
		NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	parameters
	)

inline

Sets display parameters for universal connections based on flange count.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

flangeCount	number of flanges of the connection
parameters	connection display parameters

unsafe void NXOpen.CAE.ModelDisplayBuilder.SetDisplayParametersByStatus	(	NXOpen.CAE.ModelDisplayBuilder.ConnectionStatus	status,
		NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	parameters
	)

inline

Sets display parameters for universal connections based on status.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

status	status of the connection
parameters	connection display parameters

unsafe void NXOpen.CAE.ModelDisplayBuilder.UpdateParametersByDiameterRangeIndex	(	int	index,
		NXOpen.CAE.ModelDisplayBuilder.ConnectionDisplayParameters	parameters
	)

inline

Update display parameters for universal connections based on the index from the diameter range list.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

Parameters

index	index from the diameter range list
parameters	connection display parameters

Property Documentation

unsafe NXOpen.CAE.ModelDisplayBuilder.ElmClrBasis NXOpen.CAE.ModelDisplayBuilder.ElementColorCycler

getset

Returns or sets the element color cycler basis

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.ElmDispQuality NXOpen.CAE.ModelDisplayBuilder.ElementDisplayQuality

getset

Returns or sets the element display quality setting

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe bool NXOpen.CAE.ModelDisplayBuilder.ElementSelectInternal

getset

Returns or sets the element select internal switch

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.ElemMaterialDisplayLaminateColor

getset

Returns or sets the element material laminate element color

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.ElemMaterialDisplayNoMaterialColor

getset

Returns or sets the element material no material element color

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.ElemQualFailColor

getset

Returns or sets the element quality check failing element color

Created in NX8.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.ElemQualFailShadedBorderColor

getset

Returns or sets the element quality check failing shaded element border color

Created in NX8.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.ElemQualPassColor

getset

Returns or sets the element quality check passing element color

Created in NX8.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe int NXOpen.CAE.ModelDisplayBuilder.ElemQualPassTranslucency

getset

Returns or sets the element quality check passing element translucency.

The range is 0-100.

Created in NX8.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.ElemQualPass NXOpen.CAE.ModelDisplayBuilder.ElemQualPassType

getset

Returns or sets the element quality check passing element display type

Created in NX8.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe bool NXOpen.CAE.ModelDisplayBuilder.GeomDisplayFreeEdges

getset

Returns or sets the geometry display free edges switch

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe bool NXOpen.CAE.ModelDisplayBuilder.GeomDisplayStitchedEdges

getset

Returns or sets the geometry display stitched edges switch

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe bool NXOpen.CAE.ModelDisplayBuilder.GeomFaceResolveDisplayContention

getset

Returns or sets the geometry face resolve mesh display contention switch

Created in NX12.0.1

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.GeomFreeEdgeColor

getset

Returns or sets the geometry display free edges color

Created in NX7.5.2

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.FreeEdgeMarker NXOpen.CAE.ModelDisplayBuilder.GeomFreeEdgeEndMarker

getset

Returns or sets the marker for endpoints of geometry free edges

Created in NX7.5.2

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.FreeEdgeFont NXOpen.CAE.ModelDisplayBuilder.GeomFreeEdgeFont

getset

Returns or sets the geometry free edge font

Created in NX7.5.2

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.FreeEdgeWidth NXOpen.CAE.ModelDisplayBuilder.GeomFreeEdgeLineWidth

getset

Returns or sets the geometry free edge line width

Created in NX7.5.2

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.GeomStitchedEdgeColor

getset

Returns or sets the geometry display stitched edges color

Created in NX7.5.2

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeMarker NXOpen.CAE.ModelDisplayBuilder.GeomStitchedEdgeEndMarker

getset

Returns or sets the marker for endpoints of geometry stitched edges

Created in NX7.5.2

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeFont NXOpen.CAE.ModelDisplayBuilder.GeomStitchedEdgeFont

getset

Returns or sets the geometry stitched edge font

Created in NX7.5.2

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.StitchedEdgeWidth NXOpen.CAE.ModelDisplayBuilder.GeomStitchedEdgeLineWidth

getset

Returns or sets the geometry stitched edge line width

Created in NX7.5.2

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.GroupElemFaceMultiGroupColor

getset

Returns or sets the group element face multiple group color

Created in NX12.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.GroupElemFaceNoGroupColor

getset

Returns or sets the group element face no group color

Created in NX12.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.GroupElemMultiGroupColor

getset

Returns or sets the group element multiple group color

Created in NX12.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.GroupElemNoGroupColor

getset

Returns or sets the group element no group color

Created in NX12.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.NodeColor

getset

Returns or sets the node color

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.NodeDisplayModeType NXOpen.CAE.ModelDisplayBuilder.NodeDisplayMode

getset

Returns or sets the node display mode type

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.NodeMarkerType NXOpen.CAE.ModelDisplayBuilder.NodeMarker

getset

Returns or sets the node marker display symbol type

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.NodeMeshShowHideOptionType NXOpen.CAE.ModelDisplayBuilder.NodeMeshShowHideOption

getset

Returns or sets the nodes to include for meshes in the show and hide commands

Created in NX9.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe bool NXOpen.CAE.ModelDisplayBuilder.NodeSelectInternal

getset

Returns or sets the node select internal switch

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.NodeUnattachedMarkerType NXOpen.CAE.ModelDisplayBuilder.NodeUnattachedMarker

getset

Returns or sets the unattached node marker display symbol type

Created in NX7.5.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe int NXOpen.CAE.ModelDisplayBuilder.NumberOfDiameterRanges

get

Returns the number of diameter ranges.

Created in NX1847.0.0

License requirements: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.NXColor NXOpen.CAE.ModelDisplayBuilder.RotationAxisColor

getset

Returns or sets the model rotation axis color

Created in NX11.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe bool NXOpen.CAE.ModelDisplayBuilder.RotationAxisDisplaySwitch

getset

Returns or sets the model rotation axis display switch

Created in NX11.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.RotationAxisLineFont NXOpen.CAE.ModelDisplayBuilder.RotationAxisFont

getset

Returns or sets the model rotation axis font

Created in NX11.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.RotationAxisWidth NXOpen.CAE.ModelDisplayBuilder.RotationAxisLineWidth

getset

Returns or sets the model rotation axis line width

Created in NX11.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe string NXOpen.CAE.ModelDisplayBuilder.SolverDisplayMode

getset

Returns or sets the model's Solver Display Mode.

Created in NX12.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe double NXOpen.CAE.ModelDisplayBuilder.UnattachedNodesInBoundingBoxRatio

getset

Returns or sets the include unattached nodes in fit switch

Created in NX10.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

unsafe NXOpen.CAE.ModelDisplayBuilder.UniversalConnectionVisualizationSettingsType NXOpen.CAE.ModelDisplayBuilder.UniversalConnectionVisualizationType

getset

Returns or sets the universal connection visualization type.

Created in NX1847.0.0

License requirements to get this property: nx_masterfem ("Finite Element Modeling")

License requirements to set this property: nx_masterfem ("Finite Element Modeling")

The documentation for this class was generated from the following file:

CAE_ModelDisplayBuilder.cs

Classes

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation