UF_PATH_create_auxfun (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command AUXFUN/. The appended text
is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_auxfun
(
UF_PATH_id_t path_id,
int auxfun_code,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
int | auxfun_code | Input | Auxfun value |
const char * | text | Input | The post command appended text |
UF_PATH_create_circular_motion (view source)
Defined in: uf_path.h
Overview
This function allows the creation of circular motion (CIRCLE/ ).
Environment
Internal and External
int UF_PATH_create_circular_motion
(
UF_PATH_id_t path_id,
UF_PATH_circular_motion_t * circular_motion_data
)
UF_PATH_create_clamp (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command CLAMP/. The appended text is
optional. If "text" is NULL then no appended test appears.
Environment
Internal and External
int UF_PATH_create_clamp
(
UF_PATH_id_t path_id,
UF_PATH_clamp_status_t clamp_status,
UF_PATH_axis_t axis_type,
const char * text
)
UF_PATH_create_contact_circular_motion (view source)
Defined in: uf_path.h
Overview
This function creates a contact circular motion.
Environment
Internal and External
int UF_PATH_create_contact_circular_motion
(
UF_PATH_id_t path_id,
UF_PATH_circular_motion_t * motion_data,
UF_PATH_contact_data_t * contact_data
)
UF_PATH_create_contact_linear_motion (view source)
Defined in: uf_path.h
Overview
This function creates a contact linear motion.
Environment
Internal and External
int UF_PATH_create_contact_linear_motion
(
UF_PATH_id_t path_id,
UF_PATH_linear_motion_t * linear_motion_data,
UF_PATH_contact_data_t * contact_data
)
UF_PATH_create_coolant_off (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command COOLNT/OFF. The appended
text is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_coolant_off
(
UF_PATH_id_t paht_id,
const char * text
)
UF_PATH_id_t | paht_id | Input | The path id for this event |
const char * | text | Input | The post command appended text |
UF_PATH_create_coolant_on (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command COOLNT/.
Environment
Internal and External
int UF_PATH_create_coolant_on
(
UF_PATH_id_t path_id,
UF_PATH_coolant_type_t coolant_type,
const char * text
)
UF_PATH_create_cut_wire (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command UNLOAD/WIRE. The appended
text is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_cut_wire
(
UF_PATH_id_t path_id,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char * | text | Input | The post command appended text |
UF_PATH_create_cutcom (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command CUTCOM/. The appended text
is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_cutcom
(
UF_PATH_id_t path_id,
UF_PATH_cutcom_t * cutcom_data,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_cutcom_t * | cutcom_data | Input | Structure specifying the cutcom data. |
const char * | text | Input | The post command appended text |
UF_PATH_create_dwell (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command DELAY/. The appended text is
optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_dwell
(
UF_PATH_id_t path_id,
double dwell_value,
UF_PATH_dwell_unit_t dwell_unit,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
double | dwell_value | Input | Amount of delay |
UF_PATH_dwell_unit_t | dwell_unit | Input | The units to use for the delay. |
const char * | text | Input | The post command appended text |
UF_PATH_create_fedrat (view source)
Defined in: uf_path.h
Overview
This function allows the creation of the post command FEDRAT/. The appended
text is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_fedrat
(
UF_PATH_id_t path_id,
double fedrat_value,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
double | fedrat_value | Input | Feed rate value |
const char * | text | Input | The post command appended text |
UF_PATH_create_flush (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command FLUSH/. The appended text is
optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_flush
(
UF_PATH_id_t path_id,
UF_PATH_flush_t * flush_data,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_flush_t * | flush_data | Input | The flush data. |
const char * | text | Input | The post command appended text |
UF_PATH_create_flush_tank (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command FLUSH/IN. The appended text
is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_flush_tank
(
UF_PATH_id_t path_id,
UF_PATH_tank_type_t tank_type,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_tank_type_t | tank_type | Input | Specifies the tank type. |
const char * | text | Input | The post command appended text |
UF_PATH_create_helical_motion (view source)
Defined in: uf_path.h
Overview
This function allows the creation of helical motion (CIRCLE/.....,TIMES ).
Environment
Internal and External
int UF_PATH_create_helical_motion
(
UF_PATH_id_t path_id,
UF_PATH_helical_motion_t * helical_motion_data
)
UF_PATH_create_level_marker (view source)
Defined in: uf_path.h
Overview
This function allows the creation of level marker.
Environment
Internal and External
int UF_PATH_create_level_marker
(
UF_PATH_id_t path_id,
UF_PATH_level_marker_t * level_marker_data
)
UF_PATH_create_linear_motion (view source)
Defined in: uf_path.h
Overview
This function allows the creation of linear motion( GOTO/ ).
Environment
Internal and External
int UF_PATH_create_linear_motion
(
UF_PATH_id_t path_id,
UF_PATH_linear_motion_t * linear_motion_data
)
UF_PATH_create_op_skip (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post comand OPSKIP/. The appended text is
optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_op_skip
(
UF_PATH_id_t path_id,
UF_PATH_op_skip_t skip_option,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_op_skip_t | skip_option | Input | The skip option. |
const char * | text | Input | The post command appended text |
UF_PATH_create_op_stop (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command OPSTOP. The appended text is
optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_op_stop
(
UF_PATH_id_t path_id,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char * | text | Input | The post command appended text |
UF_PATH_create_opmessage (view source)
Defined in: uf_path.h
Overview
This function allows the creation of the post command DISPLY/.
Environment
Internal and External
int UF_PATH_create_opmessage
(
UF_PATH_id_t path_id,
const char* text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char* | text | Input | The text to output to the operator. |
UF_PATH_create_origin (view source)
Defined in: uf_path.h
Overview
This function allows the creation of the post command ORIGIN/. The
appended text is optional. If 'text' is NULL then no appended text
appears.
Environment
Internal and External
int UF_PATH_create_origin
(
UF_PATH_id_t path_id,
const double origin_coordinates [ 3 ] ,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const double | origin_coordinates [ 3 ] | Input | The origin x/y/z |
const char * | text | Input | The post command appended text |
UF_PATH_create_power (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command POWER/. The appended text is
optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_power
(
UF_PATH_id_t path_id,
double power_value,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
double | power_value | Input | Value of the power register |
const char * | text | Input | The post command appended text |
UF_PATH_create_pprint (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command PPRINT/.
Environment
Internal and External
int UF_PATH_create_pprint
(
UF_PATH_id_t path_id,
const char* text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char* | text | Input | The text to output on the PPRINT command |
UF_PATH_create_prefun (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command PREFUN/. The appended text
is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_prefun
(
UF_PATH_id_t path_id,
int prefun_code,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
int | prefun_code | Input | Prefun value |
const char * | text | Input | The post command appended text |
UF_PATH_create_rotate (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command ROTATE/. The appended text
is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_rotate
(
UF_PATH_id_t path_id,
UF_PATH_rotate_t * rotate_data,
const char * text
)
UF_PATH_id_t | path_id | Input | The path ID for this event |
UF_PATH_rotate_t * | rotate_data | Input | The data specifying the rotation. |
const char * | text | Input | The post command appended text |
UF_PATH_create_select_head (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SELECT/HEAD. The appended
text is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_select_head
(
UF_PATH_id_t path_id,
UF_PATH_head_type_t head_type,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_head_type_t | head_type | Input | The head type in the turret of the lathe. |
const char * | text | Input | The post command appended text |
UF_PATH_create_seqno (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SEQNO/. The
appended text is optional. If "text" is NULL then no appended text
appears.
Environment
Internal and External
int UF_PATH_create_seqno
(
UF_PATH_id_t path_id,
UF_PATH_seqno_t seq_type,
int seq_number,
int seq_incr,
int seq_freq,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_seqno_t | seq_type | Input | The sequence type |
int | seq_number | Input | The sequence number, only valid if seq_type is UF_PATH_SEQNO_N |
int | seq_incr | Input | Only valid if seq_type is UF_PATH_SEQNO_N |
int | seq_freq | Input | Only valid if seq_type is UF_PATH_SEQNO_N |
const char * | text | Input | The post command appended text |
UF_PATH_create_set_mode (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SET/. The appended text is
optional. If 'text' is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_set_mode
(
UF_PATH_id_t path_id,
UF_PATH_output_mode_t ouput_mode,
UF_PATH_feedrate_mode_t feedrate_mode,
UF_PATH_arc_mode_t arc_mode,
UF_PATH_parallel_mode_t parallel_mode,
UF_PATH_machine_mode_t machine_mode,
const char * text
)
UF_PATH_create_spindle_off (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SPINDL/OFF. The appended text
is optional. If "text" is NULL then bo appended text appears.
Environment
Internal and External
int UF_PATH_create_spindle_off
(
UF_PATH_id_t path_id,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char * | text | Input | The post command appended text |
UF_PATH_create_spindle_on (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SPINDL/. The appended text
is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_spindle_on
(
UF_PATH_id_t path_id,
UF_PATH_spindle_on_t * spindle_on_data,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_spindle_on_t * | spindle_on_data | Input | The spindle data for the command. |
const char * | text | Input | The post command appended text |
UF_PATH_create_spindle_reverse (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SPINDL/REVERSE.
The appended text is optional.
If "text" is NULL then bo appended text appears.
Environment
Internal and External
int UF_PATH_create_spindle_reverse
(
UF_PATH_id_t path_id,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char * | text | Input | The post command appended text |
UF_PATH_create_stop (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command STOP. The appended text is
optional. If the "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_stop
(
UF_PATH_id_t path_id,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char * | text | Input | The post command appended text |
UF_PATH_create_text (view source)
Defined in: uf_path.h
Overview
This function allows the creation of a post command text string.
Environment
Internal and External
int UF_PATH_create_text
(
UF_PATH_id_t path_id,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char * | text | Input | The post command text string |
UF_PATH_create_thread_wire (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command LOAD/WIRE. The appended
text is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_thread_wire
(
UF_PATH_id_t path_id,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char * | text | Input | The post command appended text |
UF_PATH_create_tool_change (view source)
Defined in: uf_path.h
Overview
This functions allows the creation of post command LOAD/TOOL(for mill) or
TURRET/ (for lathe). The appended text is optional. If "text" is NULL then no
appended text appears.
Environment
Internal and External
int UF_PATH_create_tool_change
(
UF_PATH_id_t path_id,
UF_PATH_tool_change_t * tool_change_data,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_tool_change_t * | tool_change_data | Input | Data specifying the tool change to make. |
const char * | text | Input | The post command appended text |
UF_PATH_create_tool_length_comp (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SET/ADJUST. The appended
text is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_tool_length_comp
(
UF_PATH_id_t path_id,
int tool_comp_register,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
int | tool_comp_register | Input | Tool length compensation register value |
const char * | text | Input | The post command appended text |
UF_PATH_create_tool_preselect (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SELECT/TOOL. The appended
text is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_tool_preselect
(
UF_PATH_id_t path_id,
int tool_number,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
int | tool_number | Input | Tool number value |
const char * | text | Input | The post command appended text |
UF_PATH_create_tracking_point_change (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command TRACKING POINT CHANGE.
The appended text is optional.
If "text" is NULL then bo appended text appears.
Environment
Internal and External
int UF_PATH_create_tracking_point_change
(
UF_PATH_id_t path_id,
UF_PATH_tracking_point_change_t * tool_change_data
)
UF_PATH_create_wire_angle (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command STAN/. The appended text is
optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_wire_angle
(
UF_PATH_id_t path_id,
double slope_value,
double angle_value,
logical angle_flag,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
double | slope_value | Input | Slope of the wire |
double | angle_value | Input | Angle of the wire |
logical | angle_flag | Input | Flag to indicate if angle is specified |
const char * | text | Input | The post command appended text |
UF_PATH_create_wire_cutcom (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command CUTCOM/. The appended text
is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_wire_cutcom
(
UF_PATH_id_t path_id,
UF_PATH_cutcom_mode_t cutcom_mode,
int adjust_register,
logical cutcom_off_flag,
logical adjust_flag,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
UF_PATH_cutcom_mode_t | cutcom_mode | Input | The mode for the CUTCOM command. |
int | adjust_register | Input | Adjust register value |
logical | cutcom_off_flag | Input | Flag indicating if cutcom off is to be output |
logical | adjust_flag | Input | Flag to indicate if the adjust register is specified |
const char * | text | Input | The post comand appended text |
UF_PATH_create_wire_guides (view source)
Defined in: uf_path.h
Overview
This function allows the creation of post command SET/UPPER. The appended text
is optional. If "text" is NULL then no appended text appears.
Environment
Internal and External
int UF_PATH_create_wire_guides
(
UF_PATH_id_t path_id,
const char * text
)
UF_PATH_id_t | path_id | Input | The path id for this event |
const char * | text | Input | The post command appended text |
UF_PATH_end_tool_path (view source)
Defined in: uf_path.h
Overview
This function signifies the end of the tool path. The "oper_id" is no
longer valid after this function executes.
Environment
Internal and External
int UF_PATH_end_tool_path
(
UF_PATH_id_t path_id
)
UF_PATH_init_tool_path (view source)
Defined in: uf_path.h
Overview
This function initializes the tool path header.
Environment
Internal and External
int UF_PATH_init_tool_path
(
UF_PATH_id_t path_id
)