Represents a NXOpen::Routing::ReuseLibrary
No creator is available in KF. More...

Public Types
enum	PartType { PartTypeGasket, PartTypeBolt, PartTypeStud, PartTypeNut, PartTypeWasher, PartTypeWeldring, PartTypeRingjoint, PartTypeUnknown = -1 }
	Represents the part type. More...

enum	ReportInBom { ReportInBomDoNotReport, ReportInBomReport }
	Represents the report in BOM logical type. More...

Public Member Functions
void	AddNewSpecification (const NXString &specName)
	Adds a new empty specification to the library. More...

void	AddNewSpecification (const char *specName)
	Adds a new empty specification to the library. More...

void	DeleteSpecification (const NXString &specName)
	Delete a Specification from the reuse library. More...

void	DeleteSpecification (const char *specName)
	Delete a Specification from the reuse library. More...

std::vector < NXOpen::Routing::CharacteristicList * >	GetMatchingParts (const NXString &startingIdentifier, NXOpen::Routing::CharacteristicList *searchCriteria)
	Query the reuse library for all parts that match the given search criteria. More...

std::vector < NXOpen::Routing::CharacteristicList * >	GetMatchingParts (const char startingIdentifier, NXOpen::Routing::CharacteristicList searchCriteria)
	Query the reuse library for all parts that match the given search criteria. More...

void	PartLibraryGetChildNodes (const NXString &nodeIdentifier, std::vector< NXString > &childIdentifiers, std::vector< NXString > &names)
	Given an identifier, this routine returns it's child identifiers. More...

void	PartLibraryGetChildNodes (const char *nodeIdentifier, std::vector< NXString > &childIdentifiers, std::vector< NXString > &names)
	Given an identifier, this routine returns it's child identifiers. More...

void	PartLibraryGetDisciplineRoots (std::vector< NXString > &identifiers, std::vector< NXString > &names)
	Returns the identifiers which represent the start nodes for the current discipline. More...

NXOpen::Routing::CharacteristicList *	PartLibraryGetPartsAtNode (const NXString &nodeIdentifier)
	Given a node identifier, this routine will return all parts associated with that node. More...

NXOpen::Routing::CharacteristicList *	PartLibraryGetPartsAtNode (const char *nodeIdentifier)
	Given a node identifier, this routine will return all parts associated with that node. More...

void	Reload ()
	Reloads all of the nodes of the Routing Reuse Library based on the current discipline. More...

void	ReloadSpecification (const NXString &specName)
	Reload a Specification into the reuse library. More...

void	ReloadSpecification (const char *specName)
	Reload a Specification into the reuse library. More...

void	ReloadSpecifications (bool forceReload)
	Reload Specifications into the reuse library. More...

void	SpecificationsAddConnectionCompatibility (const NXString &specName, const NXString &connectionTypeOne, const NXString &connectionTypeTwo)
	Adds a connection compatibility to the specification. More...

void	SpecificationsAddConnectionCompatibility (const char specName, const char connectionTypeOne, const char *connectionTypeTwo)
	Adds a connection compatibility to the specification. More...

void	SpecificationsAddGenericPostPlacement (const NXString &specName, const NXString &placedPartIdentifier, const NXString &postPlacementIdentifier, std::vector< NXString > &searchAttributes)
	Add a generic post placmeent rule. More...

void	SpecificationsAddGenericPostPlacement (const char specName, const char placedPartIdentifier, const char *postPlacementIdentifier, std::vector< NXString > &searchAttributes)
	Add a generic post placmeent rule. More...

void	SpecificationsDefinePostPlacementRules (const NXString &specName, NXOpen::Routing::ReuseLibrary::PartType partType, const NXString &startingIdentifier, std::vector< NXString > &searchAttributes)
	Defines Post Placement rules. More...

void	SpecificationsDefinePostPlacementRules (const char specName, NXOpen::Routing::ReuseLibrary::PartType partType, const char startingIdentifier, std::vector< NXString > &searchAttributes)
	Defines Post Placement rules. More...

NXOpen::Routing::CharacteristicList *	SpecificationsGetAttributeRelationships (const NXString &specName, const NXString &nodeIdentifier, int *numFilters)
	Gets the attribute relationships at a given library node. More...

NXOpen::Routing::CharacteristicList *	SpecificationsGetAttributeRelationships (const char specName, const char nodeIdentifier, int *numFilters)
	Gets the attribute relationships at a given library node. More...

void	SpecificationsGetBranchTable (const NXString &specName, std::vector< double > &npsValues, std::vector< double > &npsBranchValues)
	Gets the branch compatibilities for the input specification. More...

void	SpecificationsGetBranchTable (const char *specName, std::vector< double > &npsValues, std::vector< double > &npsBranchValues)
	Gets the branch compatibilities for the input specification. More...

void	SpecificationsGetConnectionCompatibilities (const NXString &specName, std::vector< NXString > &connectionTypesOne, std::vector< NXString > &connectionTypesTwo)
	Get the list of connection compatibilities from the specificaiton. More...

void	SpecificationsGetConnectionCompatibilities (const char *specName, std::vector< NXString > &connectionTypesOne, std::vector< NXString > &connectionTypesTwo)
	Get the list of connection compatibilities from the specificaiton. More...

void	SpecificationsGetConnectionPostPlacement (const NXString &specName, const NXString &connectionTypeOne, const NXString &connectionTypeTwo, bool gasket, bool bolt, bool stud, bool nut, bool washers, bool weldRing, bool *ringJoints)
	Get post placement options for a given connection. More...

void	SpecificationsGetConnectionPostPlacement (const char specName, const char connectionTypeOne, const char connectionTypeTwo, bool gasket, bool bolt, bool stud, bool nut, bool washers, bool weldRing, bool ringJoints)
	Get post placement options for a given connection. More...

NXString	SpecificationsGetCurrent ()
	Returns the name of the current specification. More...

NXString	SpecificationsGetDescription (const NXString &specName)
	Gets the description of a specification. More...

NXString	SpecificationsGetDescription (const char *specName)
	Gets the description of a specification. More...

void	SpecificationsGetDisciplineSpecifications (std::vector< NXString > &specs)
	Returns the names of all of the specifications that are defined for the current discipline. More...

void	SpecificationsGetGeneralConnectionOptions (const NXString &specName, bool modelGaskets, bool modelWeldGaps, double additionalBoltLength, double additionalStudLength, double *weldGapValue)
	Gets the general connection options. More...

void	SpecificationsGetGeneralConnectionOptions (const char specName, bool modelGaskets, bool modelWeldGaps, double additionalBoltLength, double additionalStudLength, double weldGapValue)
	Gets the general connection options. More...

void	SpecificationsGetGenericPostPlacements (const NXString &specName, std::vector< NXString > &placedPartIdentifier, std::vector< NXString > &postPlacementIdentifier)
	Gets the defined generic post placement rules. More...

void	SpecificationsGetGenericPostPlacements (const char *specName, std::vector< NXString > &placedPartIdentifier, std::vector< NXString > &postPlacementIdentifier)
	Gets the defined generic post placement rules. More...

void	SpecificationsGetGenericPostPlacementSearchAttributes (const NXString &specName, const NXString &placedPartIdentifier, const NXString &postPlacementIdentifier, std::vector< NXString > &searchAttributes)
	Get the generic post placement search attributes. More...

void	SpecificationsGetGenericPostPlacementSearchAttributes (const char specName, const char placedPartIdentifier, const char *postPlacementIdentifier, std::vector< NXString > &searchAttributes)
	Get the generic post placement search attributes. More...

void	SpecificationsGetPostPlacementRules (const NXString &specName, NXOpen::Routing::ReuseLibrary::PartType partType, NXString *startingIdentifier, std::vector< NXString > &searchAttributes)
	Gets post placement rules. More...

void	SpecificationsGetPostPlacementRules (const char specName, NXOpen::Routing::ReuseLibrary::PartType partType, NXString startingIdentifier, std::vector< NXString > &searchAttributes)
	Gets post placement rules. More...

void	SpecificationsGetReportInBom (const NXString &specName, bool gasket, bool bolt, bool stud, bool nut, bool washers, bool weldRing, bool ringJoints, bool weldGap)
	Gets the Report in BOM flags. More...

void	SpecificationsGetReportInBom (const char specName, bool gasket, bool bolt, bool stud, bool nut, bool washers, bool weldRing, bool ringJoints, bool *weldGap)
	Gets the Report in BOM flags. More...

void	SpecificationsRemoveBranchCompatibility (const NXString &specName, double nps, double npsBranch)
	Removes a branch compatibility Created in NX8.0.0. More...

void	SpecificationsRemoveBranchCompatibility (const char *specName, double nps, double npsBranch)
	Removes a branch compatibility Created in NX8.0.0. More...

void	SpecificationsRemoveConnectionCompatibility (const NXString &specName, const NXString &connectionTypeOne, const NXString &connectionTypeTwo)
	Removes a connection compatibility from the specification. More...

void	SpecificationsRemoveConnectionCompatibility (const char specName, const char connectionTypeOne, const char *connectionTypeTwo)
	Removes a connection compatibility from the specification. More...

void	SpecificationsRemoveGenericPostPlacement (const NXString &specName, const NXString &placedPartIdentifier, const NXString &postPlacementIdentifier)
	Remove a generic post placement option. More...

void	SpecificationsRemoveGenericPostPlacement (const char specName, const char placedPartIdentifier, const char *postPlacementIdentifier)
	Remove a generic post placement option. More...

void	SpecificationsSetAttributeRelationships (const NXString &specName, const NXString &nodeIdentifier, NXOpen::Routing::CharacteristicList *attributeFilter)
	Sets the attribute relationships for a specification. More...

void	SpecificationsSetAttributeRelationships (const char specName, const char nodeIdentifier, NXOpen::Routing::CharacteristicList *attributeFilter)
	Sets the attribute relationships for a specification. More...

void	SpecificationsSetBranchCompatibility (const NXString &specName, double nps, double npsBranch)
	Sets a branch compatibility. More...

void	SpecificationsSetBranchCompatibility (const char *specName, double nps, double npsBranch)
	Sets a branch compatibility. More...

void	SpecificationsSetConnectionPostPlacement (const NXString &specName, const NXString &connectionTypeOne, const NXString &connectionTypeTwo, bool gasket, bool bolt, bool stud, bool nut, bool washers, bool weldRing, bool ringJoints)
	Set Connection post placement rules on a valid connection. More...

void	SpecificationsSetConnectionPostPlacement (const char specName, const char connectionTypeOne, const char *connectionTypeTwo, bool gasket, bool bolt, bool stud, bool nut, bool washers, bool weldRing, bool ringJoints)
	Set Connection post placement rules on a valid connection. More...

void	SpecificationsSetDescription (const NXString &specName, const NXString &description)
	Sets the description text for a specification. More...

void	SpecificationsSetDescription (const char specName, const char description)
	Sets the description text for a specification. More...

void	SpecificationsSetGeneralConnectionOptions (const NXString &specName, bool modelGaskets, bool modelWeldGaps, double additionalBoltLength, double additionalStudLength, double weldGapValue)
	Sets the General Connection Options. More...

void	SpecificationsSetGeneralConnectionOptions (const char *specName, bool modelGaskets, bool modelWeldGaps, double additionalBoltLength, double additionalStudLength, double weldGapValue)
	Sets the General Connection Options. More...

void	SpecificationsSetReportInBom (const NXString &specName, bool gasket, bool bolt, bool stud, bool nut, bool washers, bool weldRing, bool ringJoints, bool weldGap)
	Sets the report in BOM flags. More...

void	SpecificationsSetReportInBom (const char *specName, bool gasket, bool bolt, bool stud, bool nut, bool washers, bool weldRing, bool ringJoints, bool weldGap)
	Sets the report in BOM flags. More...

tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a NXOpen::Routing::ReuseLibrary
No creator is available in KF.

Created in NX7.5.3.

Member Enumeration Documentation

enum NXOpen::Routing::ReuseLibrary::PartType

Represents the part type.

Enumerator
PartTypeGasket	Gasket Post Placement Type.
PartTypeBolt	Bolt Post Placement Type.
PartTypeStud	Stud Post Placement Type.
PartTypeNut	Nut Post Placement Type.
PartTypeWasher	Washer Post Placement Type.
PartTypeWeldring	Weld Ring Post Placement Type.
PartTypeRingjoint	Ring Joint Post Placement Type.
PartTypeUnknown	Unknown Type.

enum NXOpen::Routing::ReuseLibrary::ReportInBom

Represents the report in BOM logical type.

Enumerator
ReportInBomDoNotReport	Do not report in the Bill of Materials.
ReportInBomReport	Report in the Bill of Materials.

Member Function Documentation

void NXOpen::Routing::ReuseLibrary::AddNewSpecification ( const NXString & specName )

Adds a new empty specification to the library.

The input name can be used to configure the specification once it has been added.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName The name of the new specification.

void NXOpen::Routing::ReuseLibrary::AddNewSpecification ( const char * specName )

Adds a new empty specification to the library.

The input name can be used to configure the specification once it has been added.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName The name of the new specification.

void NXOpen::Routing::ReuseLibrary::DeleteSpecification ( const NXString & specName )

Delete a Specification from the reuse library.

Created in NX9.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName Specification Name

void NXOpen::Routing::ReuseLibrary::DeleteSpecification ( const char * specName )

Delete a Specification from the reuse library.

Created in NX9.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName Specification Name

std::vector<NXOpen::Routing::CharacteristicList *> NXOpen::Routing::ReuseLibrary::GetMatchingParts	(	const NXString &	startingIdentifier,
		NXOpen::Routing::CharacteristicList *	searchCriteria
	)

Query the reuse library for all parts that match the given search criteria.

The search will include the given node and all of its children.

Returns: Search Results
Created in NX8.5.3.

License requirements : routing_base ("Routing Basic")

Parameters

startingIdentifier	Node from which to begin the search.
searchCriteria	Search Criteria

std::vector<NXOpen::Routing::CharacteristicList *> NXOpen::Routing::ReuseLibrary::GetMatchingParts	(	const char *	startingIdentifier,
		NXOpen::Routing::CharacteristicList *	searchCriteria
	)

Query the reuse library for all parts that match the given search criteria.

The search will include the given node and all of its children.

Returns: Search Results
Created in NX8.5.3.

License requirements : routing_base ("Routing Basic")

Parameters

startingIdentifier	Node from which to begin the search.
searchCriteria	Search Criteria

void NXOpen::Routing::ReuseLibrary::PartLibraryGetChildNodes	(	const NXString &	nodeIdentifier,
		std::vector< NXString > &	childIdentifiers,
		std::vector< NXString > &	names
	)

Given an identifier, this routine returns it's child identifiers.

Created in NX8.0.0.

License requirements : routing_base ("Routing Basic")

Parameters

nodeIdentifier	A part library node identifier.
childIdentifiers	The child node identifiers.
names	The discipline start node identifiers.

void NXOpen::Routing::ReuseLibrary::PartLibraryGetChildNodes	(	const char *	nodeIdentifier,
		std::vector< NXString > &	childIdentifiers,
		std::vector< NXString > &	names
	)

Given an identifier, this routine returns it's child identifiers.

Created in NX8.0.0.

License requirements : routing_base ("Routing Basic")

Parameters

nodeIdentifier	A part library node identifier.
childIdentifiers	The child node identifiers.
names	The discipline start node identifiers.

void NXOpen::Routing::ReuseLibrary::PartLibraryGetDisciplineRoots	(	std::vector< NXString > &	identifiers,
		std::vector< NXString > &	names
	)

Returns the identifiers which represent the start nodes for the current discipline.

Created in NX8.0.0.

License requirements : routing_base ("Routing Basic")

Parameters

identifiers	The discipline start node identifiers.
names	The discipline start node identifiers.

NXOpen::Routing::CharacteristicList* NXOpen::Routing::ReuseLibrary::PartLibraryGetPartsAtNode ( const NXString & nodeIdentifier )

Given a node identifier, this routine will return all parts associated with that node.

Returns: An array of parts.
Created in NX8.0.0.

License requirements : routing_base ("Routing Basic")

Parameters

nodeIdentifier A part library node identifier.

NXOpen::Routing::CharacteristicList* NXOpen::Routing::ReuseLibrary::PartLibraryGetPartsAtNode ( const char * nodeIdentifier )

Given a node identifier, this routine will return all parts associated with that node.

Returns: An array of parts.
Created in NX8.0.0.

License requirements : routing_base ("Routing Basic")

Parameters

nodeIdentifier A part library node identifier.

void NXOpen::Routing::ReuseLibrary::Reload ( )

Reloads all of the nodes of the Routing Reuse Library based on the current discipline.

Created in NX7.5.3.

License requirements : routing_base ("Routing Basic")

void NXOpen::Routing::ReuseLibrary::ReloadSpecification ( const NXString & specName )

Reload a Specification into the reuse library.

Created in NX9.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName Specification Name

void NXOpen::Routing::ReuseLibrary::ReloadSpecification ( const char * specName )

Reload a Specification into the reuse library.

Created in NX9.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName Specification Name

void NXOpen::Routing::ReuseLibrary::ReloadSpecifications ( bool forceReload )

Reload Specifications into the reuse library.

Created in NX9.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

forceReload Should the specifications be forced to reload? Setting forceReload false will reload only if there are no (non-legacy) specifications loaded in the reuse library.

void NXOpen::Routing::ReuseLibrary::SpecificationsAddConnectionCompatibility	(	const NXString &	specName,
		const NXString &	connectionTypeOne,
		const NXString &	connectionTypeTwo
	)

Adds a connection compatibility to the specification.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
connectionTypeOne	Value of the first CONNECTION_TYPE attribute.
connectionTypeTwo	Value of the second CONNECTION_TYPE attribute.

void NXOpen::Routing::ReuseLibrary::SpecificationsAddConnectionCompatibility	(	const char *	specName,
		const char *	connectionTypeOne,
		const char *	connectionTypeTwo
	)

Adds a connection compatibility to the specification.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
connectionTypeOne	Value of the first CONNECTION_TYPE attribute.
connectionTypeTwo	Value of the second CONNECTION_TYPE attribute.

void NXOpen::Routing::ReuseLibrary::SpecificationsAddGenericPostPlacement	(	const NXString &	specName,
		const NXString &	placedPartIdentifier,
		const NXString &	postPlacementIdentifier,
		std::vector< NXString > &	searchAttributes
	)

Add a generic post placmeent rule.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
placedPartIdentifier	The placed part node identifier.
postPlacementIdentifier	The post placement part identifier.
searchAttributes	Attribute search titles.

void NXOpen::Routing::ReuseLibrary::SpecificationsAddGenericPostPlacement	(	const char *	specName,
		const char *	placedPartIdentifier,
		const char *	postPlacementIdentifier,
		std::vector< NXString > &	searchAttributes
	)

Add a generic post placmeent rule.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
placedPartIdentifier	The placed part node identifier.
postPlacementIdentifier	The post placement part identifier.
searchAttributes	Attribute search titles.

void NXOpen::Routing::ReuseLibrary::SpecificationsDefinePostPlacementRules	(	const NXString &	specName,
		NXOpen::Routing::ReuseLibrary::PartType	partType,
		const NXString &	startingIdentifier,
		std::vector< NXString > &	searchAttributes
	)

Defines Post Placement rules.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name.
partType	Post Placement Type
startingIdentifier	Library Node to search from.
searchAttributes	Search Attribute Titles.

void NXOpen::Routing::ReuseLibrary::SpecificationsDefinePostPlacementRules	(	const char *	specName,
		NXOpen::Routing::ReuseLibrary::PartType	partType,
		const char *	startingIdentifier,
		std::vector< NXString > &	searchAttributes
	)

Defines Post Placement rules.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name.
partType	Post Placement Type
startingIdentifier	Library Node to search from.
searchAttributes	Search Attribute Titles.

NXOpen::Routing::CharacteristicList* NXOpen::Routing::ReuseLibrary::SpecificationsGetAttributeRelationships	(	const NXString &	specName,
		const NXString &	nodeIdentifier,
		int *	numFilters
	)

Gets the attribute relationships at a given library node.

Returns: Attribute filters.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
nodeIdentifier	A part library node identifier.
numFilters	numfilters

NXOpen::Routing::CharacteristicList* NXOpen::Routing::ReuseLibrary::SpecificationsGetAttributeRelationships	(	const char *	specName,
		const char *	nodeIdentifier,
		int *	numFilters
	)

Gets the attribute relationships at a given library node.

Returns: Attribute filters.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
nodeIdentifier	A part library node identifier.
numFilters	numfilters

void NXOpen::Routing::ReuseLibrary::SpecificationsGetBranchTable	(	const NXString &	specName,
		std::vector< double > &	npsValues,
		std::vector< double > &	npsBranchValues
	)

Gets the branch compatibilities for the input specification.

Compatibilities can be identified by indexing into the NPSValues and NPS_BRANCHValues arrays. Index 0 in each array is a compatibility and so on.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
npsValues	The NPS Values.
npsBranchValues	The NPS_BRANCH values.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetBranchTable	(	const char *	specName,
		std::vector< double > &	npsValues,
		std::vector< double > &	npsBranchValues
	)

Gets the branch compatibilities for the input specification.

Compatibilities can be identified by indexing into the NPSValues and NPS_BRANCHValues arrays. Index 0 in each array is a compatibility and so on.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
npsValues	The NPS Values.
npsBranchValues	The NPS_BRANCH values.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetConnectionCompatibilities	(	const NXString &	specName,
		std::vector< NXString > &	connectionTypesOne,
		std::vector< NXString > &	connectionTypesTwo
	)

Get the list of connection compatibilities from the specificaiton.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification name.
connectionTypesOne	Values for the first CONNECTION_TYPE attribute.
connectionTypesTwo	Values for the second CONNECTION_TYPE attribute.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetConnectionCompatibilities	(	const char *	specName,
		std::vector< NXString > &	connectionTypesOne,
		std::vector< NXString > &	connectionTypesTwo
	)

Get the list of connection compatibilities from the specificaiton.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification name.
connectionTypesOne	Values for the first CONNECTION_TYPE attribute.
connectionTypesTwo	Values for the second CONNECTION_TYPE attribute.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetConnectionPostPlacement	(	const NXString &	specName,
		const NXString &	connectionTypeOne,
		const NXString &	connectionTypeTwo,
		bool *	gasket,
		bool *	bolt,
		bool *	stud,
		bool *	nut,
		bool *	washers,
		bool *	weldRing,
		bool *	ringJoints
	)

Get post placement options for a given connection.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification name.
connectionTypeOne	The first CONNECTION_TYPE value.
connectionTypeTwo	The second CONNECTION_TYPE value.
gasket	Whether or not to place Gaskets for this connection.
bolt	Whether or not to place Bolts for this connection.
stud	Whether or not to place Studs for this connection.
nut	Whether or not to place Nuts for this connection.
washers	Whether or not to place Washers for this connection.
weldRing	Whether or not to place Weld Rings for this connection.
ringJoints	ringjoints

void NXOpen::Routing::ReuseLibrary::SpecificationsGetConnectionPostPlacement	(	const char *	specName,
		const char *	connectionTypeOne,
		const char *	connectionTypeTwo,
		bool *	gasket,
		bool *	bolt,
		bool *	stud,
		bool *	nut,
		bool *	washers,
		bool *	weldRing,
		bool *	ringJoints
	)

Get post placement options for a given connection.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification name.
connectionTypeOne	The first CONNECTION_TYPE value.
connectionTypeTwo	The second CONNECTION_TYPE value.
gasket	Whether or not to place Gaskets for this connection.
bolt	Whether or not to place Bolts for this connection.
stud	Whether or not to place Studs for this connection.
nut	Whether or not to place Nuts for this connection.
washers	Whether or not to place Washers for this connection.
weldRing	Whether or not to place Weld Rings for this connection.
ringJoints	ringjoints

NXString NXOpen::Routing::ReuseLibrary::SpecificationsGetCurrent ( )

Returns the name of the current specification.

Returns: The name of the current specification.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

NXString NXOpen::Routing::ReuseLibrary::SpecificationsGetDescription ( const NXString & specName )

Gets the description of a specification.

Returns: Specification description.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName The name of the specification.

NXString NXOpen::Routing::ReuseLibrary::SpecificationsGetDescription ( const char * specName )

Gets the description of a specification.

Returns: Specification description.
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName The name of the specification.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetDisciplineSpecifications ( std::vector< NXString > & specs )

Returns the names of all of the specifications that are defined for the current discipline.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specs Specification names.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetGeneralConnectionOptions	(	const NXString &	specName,
		bool *	modelGaskets,
		bool *	modelWeldGaps,
		double *	additionalBoltLength,
		double *	additionalStudLength,
		double *	weldGapValue
	)

Gets the general connection options.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
modelGaskets	Whether or not to model Gaskets
modelWeldGaps	Whether or not to model Weld Gaps
additionalBoltLength	Additional length for bolts.
additionalStudLength	Additional length for studs
weldGapValue	weldgapvalue

void NXOpen::Routing::ReuseLibrary::SpecificationsGetGeneralConnectionOptions	(	const char *	specName,
		bool *	modelGaskets,
		bool *	modelWeldGaps,
		double *	additionalBoltLength,
		double *	additionalStudLength,
		double *	weldGapValue
	)

Gets the general connection options.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
modelGaskets	Whether or not to model Gaskets
modelWeldGaps	Whether or not to model Weld Gaps
additionalBoltLength	Additional length for bolts.
additionalStudLength	Additional length for studs
weldGapValue	weldgapvalue

void NXOpen::Routing::ReuseLibrary::SpecificationsGetGenericPostPlacements	(	const NXString &	specName,
		std::vector< NXString > &	placedPartIdentifier,
		std::vector< NXString > &	postPlacementIdentifier
	)

Gets the defined generic post placement rules.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name.
placedPartIdentifier	The list of placed part node identifiers
postPlacementIdentifier	The list of post placement node identifiers.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetGenericPostPlacements	(	const char *	specName,
		std::vector< NXString > &	placedPartIdentifier,
		std::vector< NXString > &	postPlacementIdentifier
	)

Gets the defined generic post placement rules.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name.
placedPartIdentifier	The list of placed part node identifiers
postPlacementIdentifier	The list of post placement node identifiers.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetGenericPostPlacementSearchAttributes	(	const NXString &	specName,
		const NXString &	placedPartIdentifier,
		const NXString &	postPlacementIdentifier,
		std::vector< NXString > &	searchAttributes
	)

Get the generic post placement search attributes.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
placedPartIdentifier	Placed part node identifier.
postPlacementIdentifier	Post placement node identifier
searchAttributes	Attribute search titles.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetGenericPostPlacementSearchAttributes	(	const char *	specName,
		const char *	placedPartIdentifier,
		const char *	postPlacementIdentifier,
		std::vector< NXString > &	searchAttributes
	)

Get the generic post placement search attributes.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
placedPartIdentifier	Placed part node identifier.
postPlacementIdentifier	Post placement node identifier
searchAttributes	Attribute search titles.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetPostPlacementRules	(	const NXString &	specName,
		NXOpen::Routing::ReuseLibrary::PartType	partType,
		NXString *	startingIdentifier,
		std::vector< NXString > &	searchAttributes
	)

Gets post placement rules.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification name.
partType	Part Type.
startingIdentifier	Library node to begin searching from.
searchAttributes	Search Attribute Titles.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetPostPlacementRules	(	const char *	specName,
		NXOpen::Routing::ReuseLibrary::PartType	partType,
		NXString *	startingIdentifier,
		std::vector< NXString > &	searchAttributes
	)

Gets post placement rules.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification name.
partType	Part Type.
startingIdentifier	Library node to begin searching from.
searchAttributes	Search Attribute Titles.

void NXOpen::Routing::ReuseLibrary::SpecificationsGetReportInBom	(	const NXString &	specName,
		bool *	gasket,
		bool *	bolt,
		bool *	stud,
		bool *	nut,
		bool *	washers,
		bool *	weldRing,
		bool *	ringJoints,
		bool *	weldGap
	)

Gets the Report in BOM flags.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
gasket	Report Gaskets
bolt	Report Bolts
stud	Report Studs
nut	Report Nuts
washers	Report Washers
weldRing	Report Weld Rings
ringJoints	Report Ring Joints
weldGap	weldgap

void NXOpen::Routing::ReuseLibrary::SpecificationsGetReportInBom	(	const char *	specName,
		bool *	gasket,
		bool *	bolt,
		bool *	stud,
		bool *	nut,
		bool *	washers,
		bool *	weldRing,
		bool *	ringJoints,
		bool *	weldGap
	)

Gets the Report in BOM flags.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
gasket	Report Gaskets
bolt	Report Bolts
stud	Report Studs
nut	Report Nuts
washers	Report Washers
weldRing	Report Weld Rings
ringJoints	Report Ring Joints
weldGap	weldgap

void NXOpen::Routing::ReuseLibrary::SpecificationsRemoveBranchCompatibility	(	const NXString &	specName,
		double	nps,
		double	npsBranch
	)

Removes a branch compatibility
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
nps	NPS Value
npsBranch	NPS_BRANCH value

void NXOpen::Routing::ReuseLibrary::SpecificationsRemoveBranchCompatibility	(	const char *	specName,
		double	nps,
		double	npsBranch
	)

Removes a branch compatibility
Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
nps	NPS Value
npsBranch	NPS_BRANCH value

void NXOpen::Routing::ReuseLibrary::SpecificationsRemoveConnectionCompatibility	(	const NXString &	specName,
		const NXString &	connectionTypeOne,
		const NXString &	connectionTypeTwo
	)

Removes a connection compatibility from the specification.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Name of the specification.
connectionTypeOne	Value of the first CONNECTION_TYPE attribute.
connectionTypeTwo	Value of the second CONNECTION_TYPE attribute.

void NXOpen::Routing::ReuseLibrary::SpecificationsRemoveConnectionCompatibility	(	const char *	specName,
		const char *	connectionTypeOne,
		const char *	connectionTypeTwo
	)

Removes a connection compatibility from the specification.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Name of the specification.
connectionTypeOne	Value of the first CONNECTION_TYPE attribute.
connectionTypeTwo	Value of the second CONNECTION_TYPE attribute.

void NXOpen::Routing::ReuseLibrary::SpecificationsRemoveGenericPostPlacement	(	const NXString &	specName,
		const NXString &	placedPartIdentifier,
		const NXString &	postPlacementIdentifier
	)

Remove a generic post placement option.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
placedPartIdentifier	Placed part node identifier.
postPlacementIdentifier	postplacementidentifier

void NXOpen::Routing::ReuseLibrary::SpecificationsRemoveGenericPostPlacement	(	const char *	specName,
		const char *	placedPartIdentifier,
		const char *	postPlacementIdentifier
	)

Remove a generic post placement option.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
placedPartIdentifier	Placed part node identifier.
postPlacementIdentifier	postplacementidentifier

void NXOpen::Routing::ReuseLibrary::SpecificationsSetAttributeRelationships	(	const NXString &	specName,
		const NXString &	nodeIdentifier,
		NXOpen::Routing::CharacteristicList *	attributeFilter
	)

Sets the attribute relationships for a specification.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
nodeIdentifier	A part library node identifier.
attributeFilter	Attribute filters.

void NXOpen::Routing::ReuseLibrary::SpecificationsSetAttributeRelationships	(	const char *	specName,
		const char *	nodeIdentifier,
		NXOpen::Routing::CharacteristicList *	attributeFilter
	)

Sets the attribute relationships for a specification.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
nodeIdentifier	A part library node identifier.
attributeFilter	Attribute filters.

void NXOpen::Routing::ReuseLibrary::SpecificationsSetBranchCompatibility	(	const NXString &	specName,
		double	nps,
		double	npsBranch
	)

Sets a branch compatibility.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
nps	NPS Value
npsBranch	NPS_BRANCH Vale

void NXOpen::Routing::ReuseLibrary::SpecificationsSetBranchCompatibility	(	const char *	specName,
		double	nps,
		double	npsBranch
	)

Sets a branch compatibility.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
nps	NPS Value
npsBranch	NPS_BRANCH Vale

void NXOpen::Routing::ReuseLibrary::SpecificationsSetConnectionPostPlacement	(	const NXString &	specName,
		const NXString &	connectionTypeOne,
		const NXString &	connectionTypeTwo,
		bool	gasket,
		bool	bolt,
		bool	stud,
		bool	nut,
		bool	washers,
		bool	weldRing,
		bool	ringJoints
	)

Set Connection post placement rules on a valid connection.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification name.
connectionTypeOne	The first CONNECTION_TYPE value.
connectionTypeTwo	The second CONNECTION_TYPE value.
gasket	Whether or not to place Gaskets for this connection.
bolt	Whether or not to place Bolts for this connection.
stud	Whether or not to place Studs for this connection.
nut	Whether or not to place Nuts for this connection.
washers	Whether or not to place Washers for this connection.
weldRing	Whether or not to place Weld Rings for this connection.
ringJoints	ringjoints

void NXOpen::Routing::ReuseLibrary::SpecificationsSetConnectionPostPlacement	(	const char *	specName,
		const char *	connectionTypeOne,
		const char *	connectionTypeTwo,
		bool	gasket,
		bool	bolt,
		bool	stud,
		bool	nut,
		bool	washers,
		bool	weldRing,
		bool	ringJoints
	)

Set Connection post placement rules on a valid connection.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification name.
connectionTypeOne	The first CONNECTION_TYPE value.
connectionTypeTwo	The second CONNECTION_TYPE value.
gasket	Whether or not to place Gaskets for this connection.
bolt	Whether or not to place Bolts for this connection.
stud	Whether or not to place Studs for this connection.
nut	Whether or not to place Nuts for this connection.
washers	Whether or not to place Washers for this connection.
weldRing	Whether or not to place Weld Rings for this connection.
ringJoints	ringjoints

void NXOpen::Routing::ReuseLibrary::SpecificationsSetDescription	(	const NXString &	specName,
		const NXString &	description
	)

Sets the description text for a specification.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
description	The description to add.

void NXOpen::Routing::ReuseLibrary::SpecificationsSetDescription	(	const char *	specName,
		const char *	description
	)

Sets the description text for a specification.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	The name of the specification.
description	The description to add.

void NXOpen::Routing::ReuseLibrary::SpecificationsSetGeneralConnectionOptions	(	const NXString &	specName,
		bool	modelGaskets,
		bool	modelWeldGaps,
		double	additionalBoltLength,
		double	additionalStudLength,
		double	weldGapValue
	)

Sets the General Connection Options.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
modelGaskets	Whether or not to model Gaskets
modelWeldGaps	Whether or not to model weld gaps.
additionalBoltLength	Additional length to add to bolts
additionalStudLength	Additional length to add to studs
weldGapValue	weldgapvalue

void NXOpen::Routing::ReuseLibrary::SpecificationsSetGeneralConnectionOptions	(	const char *	specName,
		bool	modelGaskets,
		bool	modelWeldGaps,
		double	additionalBoltLength,
		double	additionalStudLength,
		double	weldGapValue
	)

Sets the General Connection Options.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Specification Name
modelGaskets	Whether or not to model Gaskets
modelWeldGaps	Whether or not to model weld gaps.
additionalBoltLength	Additional length to add to bolts
additionalStudLength	Additional length to add to studs
weldGapValue	weldgapvalue

void NXOpen::Routing::ReuseLibrary::SpecificationsSetReportInBom	(	const NXString &	specName,
		bool	gasket,
		bool	bolt,
		bool	stud,
		bool	nut,
		bool	washers,
		bool	weldRing,
		bool	ringJoints,
		bool	weldGap
	)

Sets the report in BOM flags.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Spec Name
gasket	Report Gaskets
bolt	Report Bolts
stud	Report Studs
nut	Report Nuts
washers	Report Washers
weldRing	Report Weld Rings
ringJoints	Report Ring Joints
weldGap	weldgap

void NXOpen::Routing::ReuseLibrary::SpecificationsSetReportInBom	(	const char *	specName,
		bool	gasket,
		bool	bolt,
		bool	stud,
		bool	nut,
		bool	washers,
		bool	weldRing,
		bool	ringJoints,
		bool	weldGap
	)

Sets the report in BOM flags.

Created in NX8.0.0.

License requirements : routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")

Parameters

specName	Spec Name
gasket	Report Gaskets
bolt	Report Bolts
stud	Report Studs
nut	Report Nuts
washers	Report Washers
weldRing	Report Weld Rings
ringJoints	Report Ring Joints
weldGap	weldgap

tag_t NXOpen::Routing::ReuseLibrary::Tag ( ) const

Returns the tag of this object.

The documentation for this class was generated from the following file:

Routing_ReuseLibrary.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation