Represents a NXOpen::Features::VehicleDesign::OilPan builder to create and edit a vehicle design oil pan. More...

Inheritance diagram for NXOpen::Features::VehicleDesign::OilPanBuilder:

Public Types
enum	PositionType { PositionTypeFront, PositionTypeRear, PositionTypeMiddle }
	Represents the oil pan positions. More...

enum	RequirementsControlType { RequirementsControlTypeStandardDriven, RequirementsControlTypeUserDefined }
	Represents the requirements control types to define the oil pan. More...

enum	VisualizationType { VisualizationTypeCurve, VisualizationTypeSurface, VisualizationTypeCurveandSurface }
	Represents the visualization types of the output. More...

Public Member Functions
NXOpen::ScCollector *	CarBodyFaces ()
	Returns the faces representing the car body geometry for the measurment. More...

NXOpen::Expression *	InnerAngle ()
	Returns the inner angle only when the position type isn't NXOpen::Features::VehicleDesign::OilPanBuilder::PositionTypeMiddle . More...

NXOpen::Expression *	InnerOffset ()
	Returns the inner offset. More...

NXString	Loading ()
	Returns the loading used in the oil pan. More...

NXOpen::Expression *	OuterAngle ()
	Returns the outer angle only when the position type isn't NXOpen::Features::VehicleDesign::OilPanBuilder::PositionTypeMiddle . More...

NXOpen::Expression *	OuterOffset ()
	Returns the outer offset only when the position type isn't NXOpen::Features::VehicleDesign::OilPanBuilder::PositionTypeMiddle . More...

NXOpen::Features::VehicleDesign::OilPanBuilder::PositionType	Position ()
	Returns the oil pan position. More...

NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControlType	RequirementsControl ()
	Returns the requirements control for standard driven or user defined. More...

void	SetLoading (const NXString &loading)
	Sets the loading used in the oil pan. More...

void	SetLoading (const char *loading)
	Sets the loading used in the oil pan. More...

void	SetPosition (NXOpen::Features::VehicleDesign::OilPanBuilder::PositionType position)
	Sets the oil pan position. More...

void	SetRequirementsControl (NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControlType requirementsControl)
	Sets the requirements control for standard driven or user defined. More...

void	SetShowDistanceMeasurement (bool showDistanceMeasurement)
	Sets the indication if the distance measurement will be shown. More...

void	SetStandard (const NXString &standard)
	Sets the standard used to define the oil pan. More...

void	SetStandard (const char *standard)
	Sets the standard used to define the oil pan. More...

void	SetVisualization (NXOpen::Features::VehicleDesign::OilPanBuilder::VisualizationType visualization)
	Sets the visualization type of the oil pan output. More...

bool	ShowDistanceMeasurement ()
	Returns the indication if the distance measurement will be shown. More...

NXString	Standard ()
	Returns the standard used to define the oil pan. More...

NXOpen::Features::VehicleDesign::OilPanBuilder::VisualizationType	Visualization ()
	Returns the visualization type of the oil pan output. More...

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature. More...

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder. More...

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0. More...

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1. More...

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1. More...

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0. More...

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0. More...

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1. More...

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1. More...

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1. More...

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1. More...

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1. More...

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1. More...

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0. More...

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder. More...

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder. More...

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a NXOpen::Features::VehicleDesign::OilPan builder to create and edit a vehicle design oil pan.

To create a new instance of this class, use NXOpen::Features::VehicleDesignCollection::CreateOilPanBuilder
Default values.

Property

Value

InnerAngle.Value

35

InnerOffset.Value

155 (millimeters part), 6 (inches part)

OuterAngle.Value

4.5

OuterOffset.Value

182 (millimeters part), 7.2 (inches part)

Position

Front

RequirementsControl

StandardDriven

ShowDistanceMeasurement

0

Visualization

Curve

Created in NX8.5.0.

Member Enumeration Documentation

enum NXOpen::Features::VehicleDesign::OilPanBuilder::PositionType

Represents the oil pan positions.

Enumerator
PositionTypeFront	front
PositionTypeRear	rear
PositionTypeMiddle	middle

enum NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControlType

Represents the requirements control types to define the oil pan.

Enumerator
RequirementsControlTypeStandardDriven	standard driven
RequirementsControlTypeUserDefined	user defined

enum NXOpen::Features::VehicleDesign::OilPanBuilder::VisualizationType

Represents the visualization types of the output.

Enumerator
VisualizationTypeCurve	curve
VisualizationTypeSurface	surface
VisualizationTypeCurveandSurface	curveand surface

Member Function Documentation

NXOpen::ScCollector* NXOpen::Features::VehicleDesign::OilPanBuilder::CarBodyFaces ( )

Returns the faces representing the car body geometry for the measurment.

Created in NX8.5.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::VehicleDesign::OilPanBuilder::InnerAngle ( )

Returns the inner angle only when the position type isn't NXOpen::Features::VehicleDesign::OilPanBuilder::PositionTypeMiddle .

Created in NX8.5.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::VehicleDesign::OilPanBuilder::InnerOffset ( )

Returns the inner offset.

Created in NX8.5.0.

License requirements : None

NXString NXOpen::Features::VehicleDesign::OilPanBuilder::Loading ( )

Returns the loading used in the oil pan.

Created in NX8.5.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::VehicleDesign::OilPanBuilder::OuterAngle ( )

Returns the outer angle only when the position type isn't NXOpen::Features::VehicleDesign::OilPanBuilder::PositionTypeMiddle .

Created in NX8.5.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::VehicleDesign::OilPanBuilder::OuterOffset ( )

Returns the outer offset only when the position type isn't NXOpen::Features::VehicleDesign::OilPanBuilder::PositionTypeMiddle .

Created in NX8.5.0.

License requirements : None

NXOpen::Features::VehicleDesign::OilPanBuilder::PositionType NXOpen::Features::VehicleDesign::OilPanBuilder::Position ( )

Returns the oil pan position.

Created in NX8.5.0.

License requirements : None

NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControlType NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControl ( )

Returns the requirements control for standard driven or user defined.

Created in NX8.5.0.

License requirements : None

void NXOpen::Features::VehicleDesign::OilPanBuilder::SetLoading ( const NXString & loading )

Sets the loading used in the oil pan.

Created in NX8.5.0.

License requirements : nx_general_packaging ("NX General Packaging")

Parameters

loading loading

void NXOpen::Features::VehicleDesign::OilPanBuilder::SetLoading ( const char * loading )

Sets the loading used in the oil pan.

Created in NX8.5.0.

License requirements : nx_general_packaging ("NX General Packaging")

Parameters

loading loading

void NXOpen::Features::VehicleDesign::OilPanBuilder::SetPosition ( NXOpen::Features::VehicleDesign::OilPanBuilder::PositionType position )

Sets the oil pan position.

Created in NX8.5.0.

License requirements : nx_general_packaging ("NX General Packaging")

Parameters

position position

void NXOpen::Features::VehicleDesign::OilPanBuilder::SetRequirementsControl ( NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControlType requirementsControl )

Sets the requirements control for standard driven or user defined.

Created in NX8.5.0.

License requirements : nx_general_packaging ("NX General Packaging")

Parameters

requirementsControl requirementscontrol

void NXOpen::Features::VehicleDesign::OilPanBuilder::SetShowDistanceMeasurement ( bool showDistanceMeasurement )

Sets the indication if the distance measurement will be shown.

Created in NX8.5.0.

License requirements : nx_general_packaging ("NX General Packaging")

Parameters

showDistanceMeasurement showdistancemeasurement

void NXOpen::Features::VehicleDesign::OilPanBuilder::SetStandard ( const NXString & standard )

Sets the standard used to define the oil pan.

Only used when the requirements control type is NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControlTypeStandardDriven .
Created in NX8.5.0.

License requirements : nx_general_packaging ("NX General Packaging")

Parameters

standard standard

void NXOpen::Features::VehicleDesign::OilPanBuilder::SetStandard ( const char * standard )

Sets the standard used to define the oil pan.

Only used when the requirements control type is NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControlTypeStandardDriven .
Created in NX8.5.0.

License requirements : nx_general_packaging ("NX General Packaging")

Parameters

standard standard

void NXOpen::Features::VehicleDesign::OilPanBuilder::SetVisualization ( NXOpen::Features::VehicleDesign::OilPanBuilder::VisualizationType visualization )

Sets the visualization type of the oil pan output.

Created in NX8.5.0.

License requirements : nx_general_packaging ("NX General Packaging")

Parameters

visualization visualization

bool NXOpen::Features::VehicleDesign::OilPanBuilder::ShowDistanceMeasurement ( )

Returns the indication if the distance measurement will be shown.

Created in NX8.5.0.

License requirements : None

NXString NXOpen::Features::VehicleDesign::OilPanBuilder::Standard ( )

Returns the standard used to define the oil pan.

Only used when the requirements control type is NXOpen::Features::VehicleDesign::OilPanBuilder::RequirementsControlTypeStandardDriven .
Created in NX8.5.0.

License requirements : None

NXOpen::Features::VehicleDesign::OilPanBuilder::VisualizationType NXOpen::Features::VehicleDesign::OilPanBuilder::Visualization ( )

Returns the visualization type of the oil pan output.

Created in NX8.5.0.

License requirements : None

The documentation for this class was generated from the following file:

Features_VehicleDesign_OilPanBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation