Represents a NXOpen::Features::ShipDesign::ShipEndCut builder
To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShipEndCutBuilder
Default values. More...

Inheritance diagram for NXOpen::Features::ShipDesign::ShipEndCutBuilder:

Public Types
enum	CreationMethod { CreationMethodFaceEdge, CreationMethodSpecifyCSYS }
	available methods used to place a cutout object More...

Public Member Functions
NXOpen::CoordinateSystem *	CoordSystem ()
	Returns the coord system Created in NX7.5.0. More...

NXOpen::EndCutBlockBuilder *	EndCutBlock ()
	Returns the end cut block (containing the library sketch block and other end cut specific settings) that defines the end cut outline Created in NX7.5.0. More...

NXOpen::Features::ShipDesign::ShipEndCutBuilder::CreationMethod	PlacementType ()
	Returns the placement type Created in NX7.5.0. More...

NXOpen::SelectTaggedObject *	SelectCSYSFace ()
	Returns the select csysface Created in NX7.5.0. More...

NXOpen::SelectTaggedObject *	SelectEdge ()
	Returns the select edge Created in NX7.5.0. More...

NXOpen::SelectTaggedObject *	SelectTargetFace ()
	Returns the select target face Created in NX7.5.0. More...

void	SetCoordSystem (NXOpen::CoordinateSystem *coordSystem)
	Sets the coord system Created in NX7.5.0. More...

void	SetPlacementType (NXOpen::Features::ShipDesign::ShipEndCutBuilder::CreationMethod placementType)
	Sets the placement type Created in NX7.5.0. More...

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature. More...

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder. More...

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0. More...

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1. More...

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1. More...

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0. More...

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0. More...

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1. More...

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1. More...

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1. More...

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1. More...

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1. More...

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1. More...

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0. More...

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder. More...

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder. More...

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a NXOpen::Features::ShipDesign::ShipEndCut builder
To create a new instance of this class, use NXOpen::Features::ShipCollection::CreateShipEndCutBuilder
Default values.

Property

Value

EndCutBlock.Angle.Value

0

EndCutBlock.Offset.Value

0

EndCutBlock.SketchBlock.Exp1.Value

0

EndCutBlock.SketchBlock.Exp10.Value

0

EndCutBlock.SketchBlock.Exp11.Value

0

EndCutBlock.SketchBlock.Exp12.Value

0

EndCutBlock.SketchBlock.Exp2.Value

0

EndCutBlock.SketchBlock.Exp3.Value

0

EndCutBlock.SketchBlock.Exp4.Value

0

EndCutBlock.SketchBlock.Exp5.Value

0

EndCutBlock.SketchBlock.Exp6.Value

0

EndCutBlock.SketchBlock.Exp7.Value

0

EndCutBlock.SketchBlock.Exp8.Value

0

EndCutBlock.SketchBlock.Exp9.Value

0

EndCutBlock.SketchBlock.Sketches

EndCut1

EndCutBlock.TaperType

Trim

Created in NX7.5.0.

Member Enumeration Documentation

enum NXOpen::Features::ShipDesign::ShipEndCutBuilder::CreationMethod

available methods used to place a cutout object

Enumerator
CreationMethodFaceEdge	1 face and 1 edge are used to place this endcut
CreationMethodSpecifyCSYS	a csys is used to place this endcut

Member Function Documentation

NXOpen::CoordinateSystem* NXOpen::Features::ShipDesign::ShipEndCutBuilder::CoordSystem ( )

Returns the coord system
Created in NX7.5.0.

License requirements : None

NXOpen::EndCutBlockBuilder* NXOpen::Features::ShipDesign::ShipEndCutBuilder::EndCutBlock ( )

Returns the end cut block (containing the library sketch block and other end cut specific settings) that defines the end cut outline
Created in NX7.5.0.

License requirements : None

NXOpen::Features::ShipDesign::ShipEndCutBuilder::CreationMethod NXOpen::Features::ShipDesign::ShipEndCutBuilder::PlacementType ( )

Returns the placement type
Created in NX7.5.0.

License requirements : None

NXOpen::SelectTaggedObject* NXOpen::Features::ShipDesign::ShipEndCutBuilder::SelectCSYSFace ( )

Returns the select csysface
Created in NX7.5.0.

License requirements : None

NXOpen::SelectTaggedObject* NXOpen::Features::ShipDesign::ShipEndCutBuilder::SelectEdge ( )

Returns the select edge
Created in NX7.5.0.

License requirements : None

NXOpen::SelectTaggedObject* NXOpen::Features::ShipDesign::ShipEndCutBuilder::SelectTargetFace ( )

Returns the select target face
Created in NX7.5.0.

License requirements : None

void NXOpen::Features::ShipDesign::ShipEndCutBuilder::SetCoordSystem ( NXOpen::CoordinateSystem * coordSystem )

Sets the coord system
Created in NX7.5.0.

License requirements : nx_ship_concept ("Ship Concept")

Parameters

coordSystem coordsystem

void NXOpen::Features::ShipDesign::ShipEndCutBuilder::SetPlacementType ( NXOpen::Features::ShipDesign::ShipEndCutBuilder::CreationMethod placementType )

Sets the placement type
Created in NX7.5.0.

License requirements : nx_ship_concept ("Ship Concept")

Parameters

placementType placementtype

The documentation for this class was generated from the following file:

Features_ShipDesign_ShipEndCutBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation