Represents a Die Hole Parent sub feature. More...

Inheritance diagram for NXOpen::Die::HoleParentBuilder:

Public Member Functions
NXOpen::Die::DieBuildStatusOption	BuildStatus ()
	Returns the build status of die holes. More...

double	CounterBoreDiameter ()
	Returns the counter bore diameter of die holes. More...

NXOpen::Die::HoleChildBuilder *	CreateChild ()
	Creates a child hole. More...

bool	CreateWithPad ()
	Returns the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created. More...

void	DeleteChild (NXOpen::Die::HoleChildBuilder *dieholechild)
	Deletes a child hole. More...

double	Depth ()
	Returns the depth of die holes. More...

bool	DesignStatus ()
	Returns the design status of die holes, if true the holes will be built into the model, if false they will not. More...

double	Diameter ()
	Returns the diameter of die holes. More...

bool	DisplayHoles ()
	Returns the display holes switch of die holes, if true the holes will be built into the model, if false they will not. More...

bool	DisplayStatus ()
	Returns the display status of die holes, if true input data to the holes will be displayed, if false the input data will not be displayed. More...

double	DropThruDiameter ()
	Returns the drop thru diameter of die holes. More...

std::vector < NXOpen::Die::HoleChildBuilder * >	GetChildren ()
	Outputs the child holes. More...

void	GetHoleAttributes (NXString title, NXString value, int color, NXString diameterTitle, NXString depthTitle, NXString counterBoreDiameterTitle)
	Gets the hole attributes, note existance of attributes depends on usage in main feature. More...

void	GetPadAttributes (NXString title, NXString value, int *color)
	Gets the pad attributes, note existance of attributes depends on usage in main feature. More...

double	PadDiameter ()
	Returns the pad diameter of die holes. More...

double	PadHeight ()
	Returns the pad height of die holes. More...

double	PlaneOffset ()
	Returns the plane offset of die holes. More...

void	SetCounterBoreDiameter (double counterBoreDiameter)
	Sets the counter bore diameter of die holes. More...

void	SetCreateWithPad (bool createWithPad)
	Sets the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created. More...

void	SetDepth (double depth)
	Sets the depth of die holes. More...

void	SetDesignStatus (bool designStatus)
	Sets the design status of die holes, if true the holes will be built into the model, if false they will not. More...

void	SetDiameter (double diameter)
	Sets the diameter of die holes. More...

void	SetDisplayHoles (bool displayHoles)
	Sets the display holes switch of die holes, if true the holes will be built into the model, if false they will not. More...

void	SetDisplayStatus (bool displayStatus)
	Sets the display status of die holes, if true input data to the holes will be displayed, if false the input data will not be displayed. More...

void	SetDropThruDiameter (double dropThruDiameter)
	Sets the drop thru diameter of die holes. More...

void	SetHoleAttributes (const NXString &title, const NXString &value, int color, const NXString &diameterTitle, const NXString &depthTitle, const NXString &counterBoreDiameterTitle)
	Sets the hole attributes, note existance of attributes depends on usage in main feature. More...

void	SetHoleAttributes (const char title, const char value, int color, const char diameterTitle, const char depthTitle, const char *counterBoreDiameterTitle)
	Sets the hole attributes, note existance of attributes depends on usage in main feature. More...

void	SetPadAttributes (const NXString &title, const NXString &value, int color)
	Sets the pad attributes, note existance of attributes depends on usage in main feature. More...

void	SetPadAttributes (const char title, const char value, int color)
	Sets the pad attributes, note existance of attributes depends on usage in main feature. More...

void	SetPadDiameter (double padDiameter)
	Sets the pad diameter of die holes. More...

void	SetPadHeight (double padHeight)
	Sets the pad height of die holes. More...

void	SetPlaneOffset (double planeOffset)
	Sets the plane offset of die holes. More...

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature. More...

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder. More...

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0. More...

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1. More...

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1. More...

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0. More...

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0. More...

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1. More...

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1. More...

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1. More...

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1. More...

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1. More...

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1. More...

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0. More...

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder. More...

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder. More...

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a Die Hole Parent sub feature.

This sub feature is created via the main feature builder.

Created in NX4.0.0.

Member Function Documentation

NXOpen::Die::DieBuildStatusOption NXOpen::Die::HoleParentBuilder::BuildStatus ( )

Returns the build status of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

double NXOpen::Die::HoleParentBuilder::CounterBoreDiameter ( )

Returns the counter bore diameter of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

NXOpen::Die::HoleChildBuilder* NXOpen::Die::HoleParentBuilder::CreateChild ( )

Creates a child hole.

Returns: Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

bool NXOpen::Die::HoleParentBuilder::CreateWithPad ( )

Returns the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

void NXOpen::Die::HoleParentBuilder::DeleteChild ( NXOpen::Die::HoleChildBuilder * dieholechild )

Deletes a child hole.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

dieholechild dieholechild

double NXOpen::Die::HoleParentBuilder::Depth ( )

Returns the depth of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

bool NXOpen::Die::HoleParentBuilder::DesignStatus ( )

Returns the design status of die holes, if true the holes will be built into the model, if false they will not.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

double NXOpen::Die::HoleParentBuilder::Diameter ( )

Returns the diameter of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

bool NXOpen::Die::HoleParentBuilder::DisplayHoles ( )

Returns the display holes switch of die holes, if true the holes will be built into the model, if false they will not.

Note that this setting has the same affect as design status, unless the create with pad switch is true.
Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

bool NXOpen::Die::HoleParentBuilder::DisplayStatus ( )

Returns the display status of die holes, if true input data to the holes will be displayed, if false the input data will not be displayed.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

double NXOpen::Die::HoleParentBuilder::DropThruDiameter ( )

Returns the drop thru diameter of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

std::vector<NXOpen::Die::HoleChildBuilder *> NXOpen::Die::HoleParentBuilder::GetChildren ( )

Outputs the child holes.

Returns: The child holes.
Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

void NXOpen::Die::HoleParentBuilder::GetHoleAttributes	(	NXString *	title,
		NXString *	value,
		int *	color,
		NXString *	diameterTitle,
		NXString *	depthTitle,
		NXString *	counterBoreDiameterTitle
	)

Gets the hole attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of hole faces.
diameterTitle	Title for diameter attribute.
depthTitle	Title for depth attribute.
counterBoreDiameterTitle	Title for counter bore diameter attribute.

void NXOpen::Die::HoleParentBuilder::GetPadAttributes	(	NXString *	title,
		NXString *	value,
		int *	color
	)

Gets the pad attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of pad faces.

double NXOpen::Die::HoleParentBuilder::PadDiameter ( )

Returns the pad diameter of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

double NXOpen::Die::HoleParentBuilder::PadHeight ( )

Returns the pad height of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

double NXOpen::Die::HoleParentBuilder::PlaneOffset ( )

Returns the plane offset of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

void NXOpen::Die::HoleParentBuilder::SetCounterBoreDiameter ( double counterBoreDiameter )

Sets the counter bore diameter of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

counterBoreDiameter counter bore diameter

void NXOpen::Die::HoleParentBuilder::SetCreateWithPad ( bool createWithPad )

Sets the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

createWithPad create with pad

void NXOpen::Die::HoleParentBuilder::SetDepth ( double depth )

Sets the depth of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

depth depth

void NXOpen::Die::HoleParentBuilder::SetDesignStatus ( bool designStatus )

Sets the design status of die holes, if true the holes will be built into the model, if false they will not.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

designStatus design status

void NXOpen::Die::HoleParentBuilder::SetDiameter ( double diameter )

Sets the diameter of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

diameter diameter

void NXOpen::Die::HoleParentBuilder::SetDisplayHoles ( bool displayHoles )

Sets the display holes switch of die holes, if true the holes will be built into the model, if false they will not.

Note that this setting has the same affect as design status, unless the create with pad switch is true.
Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

displayHoles display holes

void NXOpen::Die::HoleParentBuilder::SetDisplayStatus ( bool displayStatus )

Sets the display status of die holes, if true input data to the holes will be displayed, if false the input data will not be displayed.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

displayStatus display status

void NXOpen::Die::HoleParentBuilder::SetDropThruDiameter ( double dropThruDiameter )

Sets the drop thru diameter of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

dropThruDiameter drop thru diameter

void NXOpen::Die::HoleParentBuilder::SetHoleAttributes	(	const NXString &	title,
		const NXString &	value,
		int	color,
		const NXString &	diameterTitle,
		const NXString &	depthTitle,
		const NXString &	counterBoreDiameterTitle
	)

Sets the hole attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of hole faces.
diameterTitle	Title for diameter attribute.
depthTitle	Title for depth attribute.
counterBoreDiameterTitle	Title for counter bore diameter attribute.

void NXOpen::Die::HoleParentBuilder::SetHoleAttributes	(	const char *	title,
		const char *	value,
		int	color,
		const char *	diameterTitle,
		const char *	depthTitle,
		const char *	counterBoreDiameterTitle
	)

Sets the hole attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of hole faces.
diameterTitle	Title for diameter attribute.
depthTitle	Title for depth attribute.
counterBoreDiameterTitle	Title for counter bore diameter attribute.

void NXOpen::Die::HoleParentBuilder::SetPadAttributes	(	const NXString &	title,
		const NXString &	value,
		int	color
	)

Sets the pad attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of pad faces.

void NXOpen::Die::HoleParentBuilder::SetPadAttributes	(	const char *	title,
		const char *	value,
		int	color
	)

Sets the pad attributes, note existance of attributes depends on usage in main feature.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

title	Title for attribute.
value	Value of attribute.
color	Color of pad faces.

void NXOpen::Die::HoleParentBuilder::SetPadDiameter ( double padDiameter )

Sets the pad diameter of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

padDiameter pad diameter

void NXOpen::Die::HoleParentBuilder::SetPadHeight ( double padHeight )

Sets the pad height of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

padHeight pad height

void NXOpen::Die::HoleParentBuilder::SetPlaneOffset ( double planeOffset )

Sets the plane offset of die holes.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

planeOffset plane offset

The documentation for this class was generated from the following file:

Die_HoleParentBuilder.hxx

Public Member Functions

Detailed Description

Member Function Documentation