Represents a Die Deck Feature sub feature. More...

Inheritance diagram for NXOpen::Die::DeckParentBuilder:

Public Member Functions
NXOpen::Die::DieBuildStatusOption	BuildStatus ()
	Returns the build status of deck. More...

bool	DesignStatus ()
	Returns the design status of deck, if true the deck will be built into the model, if false it will not. More...

bool	DisplayStatus ()
	Returns the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed. More...

std::vector< NXOpen::IProfile * >	GetBaseFlange (NXOpen::Die::DirectionOption *direction)
	Gets the base flange profile of the draw die punch. More...

std::vector< NXOpen::IProfile * >	GetBinderEdge (NXOpen::Die::DirectionOption *direction)
	Gets the binder edge profile of the upper draw die deck. More...

std::vector< NXOpen::IProfile * >	GetIntermediateDeck (NXOpen::Die::DirectionOption *direction)
	Gets the intermediate deck profile of the deck. More...

std::vector< NXOpen::IProfile * >	GetMainDeck (NXOpen::Die::DirectionOption *direction)
	Gets the main deck profile of the upper draw die deck. More...

std::vector< NXOpen::IProfile * >	GetMainWallCenterline (NXOpen::Die::DirectionOption *direction)
	Gets the main wall centerline profile of the draw die punch. More...

NXOpen::Body *	InnerDeckSheet ()
	Returns the inner deck sheet of deck. More...

NXOpen::ISurface *	IntermediateDeckOrientation ()
	Returns the intermediate deck orientation of the deck. More...

void	SetBaseFlange (NXOpen::Die::DirectionOption direction, const std::vector< NXOpen::IProfile * > &profileEntries)
	Sets the base flange profile of the draw die punch. More...

void	SetBinderEdge (NXOpen::Die::DirectionOption direction, const std::vector< NXOpen::IProfile * > &profileEntries)
	Sets the binder edge profile of the upper draw die deck. More...

void	SetDesignStatus (bool designStatus)
	Sets the design status of deck, if true the deck will be built into the model, if false it will not. More...

void	SetDisplayStatus (bool displayStatus)
	Sets the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed. More...

void	SetInnerDeckSheet (NXOpen::Body *innerDeckSheet)
	Sets the inner deck sheet of deck. More...

void	SetIntermediateDeck (NXOpen::Die::DirectionOption direction, const std::vector< NXOpen::IProfile * > &profileEntries)
	Sets the intermediate deck profile of the deck. More...

void	SetIntermediateDeckOrientation (NXOpen::ISurface *intermediateDeckOrientation)
	Sets the intermediate deck orientation of the deck. More...

void	SetMainDeck (NXOpen::Die::DirectionOption direction, const std::vector< NXOpen::IProfile * > &profileEntries)
	Sets the main deck profile of the upper draw die deck. More...

void	SetMainWallCenterline (NXOpen::Die::DirectionOption direction, const std::vector< NXOpen::IProfile * > &profileEntries)
	Sets the main wall centerline profile of the draw die punch. More...

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature. More...

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder. More...

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited. More...

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0. More...

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1. More...

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1. More...

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0. More...

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0. More...

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1. More...

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1. More...

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1. More...

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1. More...

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1. More...

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited. More...

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1. More...

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0. More...

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder. More...

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder. More...

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a Die Deck Feature sub feature.

Used by the Upper Draw Die and Draw Die Punch to capture the deck definition. Unless specified, the attributes and methods are generic and can be applied to any type of deck.
This sub feature is created via the main feature builder.

Created in NX4.0.0.

Member Function Documentation

NXOpen::Die::DieBuildStatusOption NXOpen::Die::DeckParentBuilder::BuildStatus ( )

Returns the build status of deck.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

bool NXOpen::Die::DeckParentBuilder::DesignStatus ( )

Returns the design status of deck, if true the deck will be built into the model, if false it will not.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

bool NXOpen::Die::DeckParentBuilder::DisplayStatus ( )

Returns the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

std::vector<NXOpen::IProfile *> NXOpen::Die::DeckParentBuilder::GetBaseFlange ( NXOpen::Die::DirectionOption * direction )

Gets the base flange profile of the draw die punch.

Knowledge Fusion: Binder Edge of Upper Draw Die.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.
Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction Profile direction.

std::vector<NXOpen::IProfile *> NXOpen::Die::DeckParentBuilder::GetBinderEdge ( NXOpen::Die::DirectionOption * direction )

Gets the binder edge profile of the upper draw die deck.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.
Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction Profile direction.

std::vector<NXOpen::IProfile *> NXOpen::Die::DeckParentBuilder::GetIntermediateDeck ( NXOpen::Die::DirectionOption * direction )

Gets the intermediate deck profile of the deck.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.
Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction Profile direction.

std::vector<NXOpen::IProfile *> NXOpen::Die::DeckParentBuilder::GetMainDeck ( NXOpen::Die::DirectionOption * direction )

Gets the main deck profile of the upper draw die deck.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.
Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction Profile direction.

std::vector<NXOpen::IProfile *> NXOpen::Die::DeckParentBuilder::GetMainWallCenterline ( NXOpen::Die::DirectionOption * direction )

Gets the main wall centerline profile of the draw die punch.

Knowledge Fusion: Main Deck of Upper Draw Die.

Returns: The profile entries, will be curves, edges, faces, sketches or curve features.
Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction Profile direction.

NXOpen::Body* NXOpen::Die::DeckParentBuilder::InnerDeckSheet ( )

Returns the inner deck sheet of deck.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

NXOpen::ISurface* NXOpen::Die::DeckParentBuilder::IntermediateDeckOrientation ( )

Returns the intermediate deck orientation of the deck.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

void NXOpen::Die::DeckParentBuilder::SetBaseFlange	(	NXOpen::Die::DirectionOption	direction,
		const std::vector< NXOpen::IProfile * > &	profileEntries
	)

Sets the base flange profile of the draw die punch.

Knowledge Fusion: Binder Edge of Upper Draw Die.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

void NXOpen::Die::DeckParentBuilder::SetBinderEdge	(	NXOpen::Die::DirectionOption	direction,
		const std::vector< NXOpen::IProfile * > &	profileEntries
	)

Sets the binder edge profile of the upper draw die deck.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

void NXOpen::Die::DeckParentBuilder::SetDesignStatus ( bool designStatus )

Sets the design status of deck, if true the deck will be built into the model, if false it will not.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

designStatus design status

void NXOpen::Die::DeckParentBuilder::SetDisplayStatus ( bool displayStatus )

Sets the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

displayStatus display status

void NXOpen::Die::DeckParentBuilder::SetInnerDeckSheet ( NXOpen::Body * innerDeckSheet )

Sets the inner deck sheet of deck.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

innerDeckSheet inner deck sheet

void NXOpen::Die::DeckParentBuilder::SetIntermediateDeck	(	NXOpen::Die::DirectionOption	direction,
		const std::vector< NXOpen::IProfile * > &	profileEntries
	)

Sets the intermediate deck profile of the deck.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

void NXOpen::Die::DeckParentBuilder::SetIntermediateDeckOrientation ( NXOpen::ISurface * intermediateDeckOrientation )

Sets the intermediate deck orientation of the deck.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

intermediateDeckOrientation intermediate deck orientation

void NXOpen::Die::DeckParentBuilder::SetMainDeck	(	NXOpen::Die::DirectionOption	direction,
		const std::vector< NXOpen::IProfile * > &	profileEntries
	)

Sets the main deck profile of the upper draw die deck.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

void NXOpen::Die::DeckParentBuilder::SetMainWallCenterline	(	NXOpen::Die::DirectionOption	direction,
		const std::vector< NXOpen::IProfile * > &	profileEntries
	)

Sets the main wall centerline profile of the draw die punch.

Knowledge Fusion: Main Deck of Upper Draw Die.

Created in NX4.0.0.

License requirements : ug_die_design ("Die Design")

Parameters

direction	Profile direction.
profileEntries	The profile entries, can be curves, edges, faces, sketches or curve features.

The documentation for this class was generated from the following file:

Die_DeckParentBuilder.hxx

Public Member Functions

Detailed Description

Member Function Documentation