Represents a FinishTurning Builder
To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateFinishTurningBuilder
Created in NX6.0.0.
More...
Inheritance diagram for NXOpen::CAM::FinishTurningBuilder:
Public Member Functions | |
| NXOpen::CAM::NcmTurnRoughFinishBuilder * | NonCuttingBuilder () |
| Returns the non-cutting builder Created in NX6.0.0. More... | |
 Public Member Functions inherited from NXOpen::CAM::RoughFinishTurningBuilder | |
| NXOpen::CAM::TrimPlane * | AxialTrimPlane1 () |
| Returns the axial trim plane 1 Created in NX6.0.0. More... | |
| NXOpen::CAM::TrimPlane * | AxialTrimPlane2 () |
| Returns the axial trim plane 2 Created in NX6.0.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::CustomMemberDataTypes | CustomMemberData () |
| Returns the Custom Member Data type Created in NX6.0.0. More... | |
| double | CustomMemberDataDistance () |
| Returns the Custom Member Data Distance Created in NX6.0.0. More... | |
| NXOpen::CAM::Boundary * | CustomPartBoundary () |
| Returns the custom part boundary builder Created in NX9.0.2. More... | |
| NXOpen::CAM::TurnCutParameters * | CutParameters () |
| Returns the cut parameter object Created in NX6.0.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::CutRegionsTypes | CutRegions () |
| Returns the Cut regions type Created in NX6.0.0. More... | |
| double | EndAngle () |
| Returns the end angle Created in NX6.0.0. More... | |
| double | EndOffset () |
| Returns the end offset Created in NX6.0.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::ExtendModeTypes | ExtendMode () |
| Returns the Extend Mode Created in NX6.0.0. More... | |
| bool | IgnoreMinimumBoringDiameter () |
| Returns the Ignore Minimum Boring Diameter toggle Created in NX6.0.0. More... | |
| NXOpen::CAM::CutAngle * | LevelAngleBuilder () |
| Returns the Level Angle Created in NX7.5.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::MaximumAreaModes | MaximumAreaMode () |
| Returns the Maximum Area mode Created in NX7.5.0. More... | |
| double | MaximumAreaSize () |
| Returns the Maximum Area Size Created in NX7.5.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::MinmaxAreaUnits | MaximumAreaUnit () |
| Returns the Maximum Area Unit Created in NX7.5.0. More... | |
| NXOpen::CAM::InheritableToolDepBuilder * | MaximumSizeAxial () |
| Returns the Maximum Size Axial Created in NX7.5.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::MinmaxSizeModes | MaximumSizeMode () |
| Returns the Maximum Size Mode Created in NX7.5.0. More... | |
| NXOpen::CAM::InheritableToolDepBuilder * | MaximumSizeRadial () |
| Returns the Maximum Size Radial Created in NX7.5.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::MinimumAreaTypes | MinimumArea () |
| Returns the Minimum Area type Created in NX6.0.0. More... | |
| double | MinimumAreaSize () |
| Returns the Minimum Area Size Created in NX6.0.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::MinmaxAreaUnits | MinimumAreaUnit () |
| Returns the Minimum Area Unit Created in NX7.5.0. More... | |
| NXOpen::CAM::InheritableToolDepBuilder * | MinimumSizeAxial () |
| Returns the Minimum Size Axial Created in NX7.5.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::MinmaxSizeModes | MinimumSizeMode () |
| Returns the Minimum Size Mode Created in NX7.5.0. More... | |
| NXOpen::CAM::InheritableToolDepBuilder * | MinimumSizeRadial () |
| Returns the Minimum Size Radial Created in NX7.5.0. More... | |
| bool | OmitReversals () |
| Returns the Omit Reversals toggle Created in NX6.0.0. More... | |
| NXOpen::CAM::TrimPlane * | RadialTrimPlane1 () |
| Returns the radial trim plane 1 Created in NX6.0.0. More... | |
| NXOpen::CAM::TrimPlane * | RadialTrimPlane2 () |
| Returns the radial trim plane 2 Created in NX6.0.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::RegionMachiningTypes | RegionMachining () |
| Returns the Region Machining type Created in NX6.0.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::RegionSelectionTypes | RegionSelection () |
| Returns the Region Selection type Created in NX6.0.0. More... | |
| NXOpen::Point * | RegionSelectionPoint () |
| Returns the Region Selection Point Created in NX6.0.0. More... | |
| void | SetCustomMemberData (NXOpen::CAM::RoughFinishTurningBuilder::CustomMemberDataTypes surfaceSensitivityMode) |
| Sets the Custom Member Data type Created in NX6.0.0. More... | |
| void | SetCustomMemberDataDistance (double surfaceSensitivityTolerance) |
| Sets the Custom Member Data Distance Created in NX6.0.0. More... | |
| void | SetCutRegions (NXOpen::CAM::RoughFinishTurningBuilder::CutRegionsTypes multipleCutRegions) |
| Sets the Cut regions type Created in NX6.0.0. More... | |
| void | SetEndAngle (double endAngle) |
| Sets the end angle Created in NX6.0.0. More... | |
| void | SetEndOffset (double endOffset) |
| Sets the end offset Created in NX6.0.0. More... | |
| void | SetExtendMode (NXOpen::CAM::RoughFinishTurningBuilder::ExtendModeTypes tangentialStartEndExtension) |
| Sets the Extend Mode Created in NX6.0.0. More... | |
| void | SetIgnoreMinimumBoringDiameter (bool ignoreMinBoringDia) |
| Sets the Ignore Minimum Boring Diameter toggle Created in NX6.0.0. More... | |
| void | SetMaximumAreaMode (NXOpen::CAM::RoughFinishTurningBuilder::MaximumAreaModes maximumAreaMode) |
| Sets the Maximum Area mode Created in NX7.5.0. More... | |
| void | SetMaximumAreaSize (double maxSize) |
| Sets the Maximum Area Size Created in NX7.5.0. More... | |
| void | SetMaximumAreaUnit (NXOpen::CAM::RoughFinishTurningBuilder::MinmaxAreaUnits maxAreaUnit) |
| Sets the Maximum Area Unit Created in NX7.5.0. More... | |
| void | SetMaximumSizeMode (NXOpen::CAM::RoughFinishTurningBuilder::MinmaxSizeModes maximumSizeMode) |
| Sets the Maximum Size Mode Created in NX7.5.0. More... | |
| void | SetMinimumArea (NXOpen::CAM::RoughFinishTurningBuilder::MinimumAreaTypes minimumAreaActive) |
| Sets the Minimum Area type Created in NX6.0.0. More... | |
| void | SetMinimumAreaSize (double minArea) |
| Sets the Minimum Area Size Created in NX6.0.0. More... | |
| void | SetMinimumAreaUnit (NXOpen::CAM::RoughFinishTurningBuilder::MinmaxAreaUnits minAreaUnit) |
| Sets the Minimum Area Unit Created in NX7.5.0. More... | |
| void | SetMinimumSizeMode (NXOpen::CAM::RoughFinishTurningBuilder::MinmaxSizeModes minimumSizeMode) |
| Sets the Minimum Size Mode Created in NX7.5.0. More... | |
| void | SetOmitReversals (bool omitReversals) |
| Sets the Omit Reversals toggle Created in NX6.0.0. More... | |
| void | SetRegionMachining (NXOpen::CAM::RoughFinishTurningBuilder::RegionMachiningTypes regionMachining) |
| Sets the Region Machining type Created in NX6.0.0. More... | |
| void | SetRegionSelection (NXOpen::CAM::RoughFinishTurningBuilder::RegionSelectionTypes cutRegionSelectionMode) |
| Sets the Region Selection type Created in NX6.0.0. More... | |
| void | SetRegionSelectionPoint (NXOpen::Point *cutRegionSelectionPoint) |
| Sets the Region Selection Point Created in NX6.0.0. More... | |
| void | SetStartAngle (double startAngle) |
| Sets the start angle Created in NX6.0.0. More... | |
| void | SetStartOffset (double startOffset) |
| Sets the Start Offset Created in NX6.0.0. More... | |
| void | SetToleranceOffset (NXOpen::CAM::RoughFinishTurningBuilder::ToleranceOffsetTypes toleranceOffsetMode) |
| Sets the Tolerance Offset type Created in NX6.0.0. More... | |
| double | StartAngle () |
| Returns the start angle Created in NX6.0.0. More... | |
| double | StartOffset () |
| Returns the Start Offset Created in NX6.0.0. More... | |
| NXOpen::CAM::CutAngle * | StepAngleBuilder () |
| Returns the Step Angle Created in NX7.5.0. More... | |
| NXOpen::CAM::RoughFinishTurningBuilder::ToleranceOffsetTypes | ToleranceOffset () |
| Returns the Tolerance Offset type Created in NX6.0.0. More... | |
| NXOpen::CAM::TrimPoint * | TrimPoint1 () |
| Returns the trim point 1 Created in NX6.0.0. More... | |
| NXOpen::CAM::TrimPoint * | TrimPoint2 () |
| Returns the trim point 2 Created in NX6.0.0. More... | |
| Public Member Functions inherited from NXOpen::CAM::TurningOperationBuilder | |
| NXString | AdditionalCommands () |
| Returns the Additional Commands Created in NX6.0.0. More... | |
| NXOpen::CAM::FeedsTurnBuilder * | FeedsBuilder () |
| Returns the feeds and speeds builder Created in NX6.0.0. More... | |
| bool | FlipToolAroundHolder () |
| Returns the Flip Tool Around Holder toggle Created in NX6.0.0. More... | |
| NXString | MachineCycleSubroutineName () |
| Returns the machine cycle subroutine name Created in NX8.0.0. More... | |
| NXOpen::CAM::TurningOperationBuilder::MotionOutputOptions | MotionOutput () |
| Returns the motion output Created in NX6.0.0. More... | |
| bool | ReorientToolHolder () |
| Returns the Reorient Tool Holder toggle. More... | |
| NXOpen::CAM::TurningOperationBuilder::ReorientToolHolderModeOptions | ReorientToolHolderMode () |
| Returns the Reorient Tool Holder Mode Created in NX11.0.0. More... | |
| bool | RotateTrackingPoint () |
| Returns the Rotate Tracking Point toggle More... | |
| void | SetAdditionalCommands (const NXString &additionalCommands) |
| Sets the Additional Commands Created in NX6.0.0. More... | |
| void | SetAdditionalCommands (const char *additionalCommands) |
| Sets the Additional Commands Created in NX6.0.0. More... | |
| void | SetFlipToolAroundHolder (bool machAAxis) |
| Sets the Flip Tool Around Holder toggle Created in NX6.0.0. More... | |
| void | SetMachineCycleSubroutineName (const NXString &machineCycleSubroutineName) |
| Sets the machine cycle subroutine name Created in NX8.0.0. More... | |
| void | SetMachineCycleSubroutineName (const char *machineCycleSubroutineName) |
| Sets the machine cycle subroutine name Created in NX8.0.0. More... | |
| void | SetMotionOutput (NXOpen::CAM::TurningOperationBuilder::MotionOutputOptions motionOutput) |
| Sets the motion output Created in NX6.0.0. More... | |
| void | SetReorientToolHolder (bool reorient) |
| Sets the Reorient Tool Holder toggle. More... | |
| void | SetReorientToolHolderMode (NXOpen::CAM::TurningOperationBuilder::ReorientToolHolderModeOptions reorientToolHolderMode) |
| Sets the Reorient Tool Holder Mode Created in NX11.0.0. More... | |
| void | SetRotateTrackingPoint (bool rotate) |
| Sets the Rotate Tracking Point toggle More... | |
| void | SetTrackingPointStatus (NXOpen::CAM::TurningOperationBuilder::TrackingPointType status) |
| Sets the tracking point status Created in NX8.5.0. More... | |
| void | SetUpdateIpw (bool updateIpwMode) |
| Sets the update IPW mode Created in NX6.0.0. More... | |
| void | SetUseMachineCycle (bool machineCycle) |
| Sets the Use Machine Cycle toggle Created in NX6.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | ToolHolderAngle () |
| Returns the Tool Holder Angle Created in NX6.0.0. More... | |
| NXOpen::CAM::TurningOperationBuilder::TrackingPointType | TrackingPointStatus () |
| Returns the tracking point status Created in NX8.5.0. More... | |
| bool | UpdateIpw () |
| Returns the update IPW mode Created in NX6.0.0. More... | |
| bool | UseMachineCycle () |
| Returns the Use Machine Cycle toggle Created in NX6.0.0. More... | |
| Public Member Functions inherited from NXOpen::CAM::OperationBuilder | |
| NXString | ChannelName () |
| Returns the channel's name Created in NX7.5.0. More... | |
| NXString | Description () |
| Returns the description Created in NX9.0.0. More... | |
| NXOpen::CAM::PostEventsCiBuilder * | EndOfPath () |
| Returns the end event builder Created in NX5.0.1. More... | |
| NXOpen::CAM::UdeSet * | EndUdeSet () |
| Returns the end ude set Created in NX7.5.0. More... | |
| NXOpen::CAM::GeometryCiBuilder * | Geometry () |
| Returns the geometry builder Created in NX5.0.0. More... | |
| std::vector< double > | GetHoleAxisValues () |
| Get the Hole Axis values. More... | |
| bool | GougeChecking () |
| Returns the gouge checking flag Created in NX9.0.0. More... | |
| NXOpen::CAM::OperationBuilder::HoleAxisTypes | HoleAxisType () |
| Returns the Hole Axis Type Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | HoleDepth () |
| Returns the max depth distance builder Created in NX5.0.0. More... | |
| NXOpen::CAM::OperationBuilder::HoleDepthTypes | HoleDepthType () |
| Returns the Hole Depth Type Created in NX5.0.0. More... | |
| NXOpen::CAM::LayoutCiBuilder * | LayoutAndLayer () |
| Returns the Layer and Layout Created in NX9.0.1. More... | |
| NXOpen::CAM::ArcOutputTypeCiBuilder * | MotionOutputBuilder () |
| Returns the motion output builder Created in NX8.0.0. More... | |
| NXOpen::CAM::Notes * | Notes () |
| Returns the notes builder Created in NX9.0.0. More... | |
| NXOpen::CAM::OperationBuilder::OptimizationBasedOnTypes | OptimizationBasedOn () |
| Returns the optimization based on in operation Created in NX5.0.0. More... | |
| NXOpen::CAM::OperationBuilder::OptimizationDistanceTypes | OptimizationDistanceMethod () |
| Returns the optimization distance method in operation Created in NX5.0.0. More... | |
| NXOpen::CAM::OperationBuilder::OptimizationLevelTypes | OptimizationLevel () |
| Returns the optimization level in operation Created in NX5.0.0. More... | |
| NXOpen::CAM::OperationDisplayOptionsBuilder * | PathDisplayOptions () |
| Returns the path display options builder Created in NX6.0.0. More... | |
| NXString | PostToolPathExit () |
| Returns the environment variable that points to the post tool path generation library which has the exit Created in NX9.0.3. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | RetractDistance () |
| Returns the Retract Distance builder (inheritable double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | RetractDistanceOnToolAxisChange () |
| Returns the Retract Distance on Tool Axis Change builder (inheritable double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | SafeClearance () |
| Returns the safe clearance builder Created in NX6.0.0. More... | |
| bool | SelectToolFlag () |
| Returns the user selected tool Created in NX5.0.0. More... | |
| void | SetChannelName (const NXString &channel) |
| Sets the channel's name Created in NX7.5.0. More... | |
| void | SetChannelName (const char *channel) |
| Sets the channel's name Created in NX7.5.0. More... | |
| void | SetDescription (const NXString &description) |
| Sets the description Created in NX9.0.0. More... | |
| void | SetDescription (const char *description) |
| Sets the description Created in NX9.0.0. More... | |
| void | SetGougeChecking (bool gougeChecking) |
| Sets the gouge checking flag Created in NX9.0.0. More... | |
| void | SetHoleAxisType (NXOpen::CAM::OperationBuilder::HoleAxisTypes types) |
| Sets the Hole Axis Type Created in NX5.0.0. More... | |
| void | SetHoleAxisValues (const std::vector< double > &holeAxis) |
| Set the Hole Axis values Created in NX5.0.0. More... | |
| void | SetHoleDepthType (NXOpen::CAM::OperationBuilder::HoleDepthTypes types) |
| Sets the Hole Depth Type Created in NX5.0.0. More... | |
| void | SetOptimizationBasedOn (NXOpen::CAM::OperationBuilder::OptimizationBasedOnTypes optimBasedOn) |
| Sets the optimization based on in operation Created in NX5.0.0. More... | |
| void | SetOptimizationDistanceMethod (NXOpen::CAM::OperationBuilder::OptimizationDistanceTypes optimDistance) |
| Sets the optimization distance method in operation Created in NX5.0.0. More... | |
| void | SetOptimizationLevel (NXOpen::CAM::OperationBuilder::OptimizationLevelTypes optimType) |
| Sets the optimization level in operation Created in NX5.0.0. More... | |
| void | SetPostToolPathExit (const NXString &exitName) |
| Sets the environment variable that points to the post tool path generation library which has the exit Created in NX9.0.3. More... | |
| void | SetPostToolPathExit (const char *exitName) |
| Sets the environment variable that points to the post tool path generation library which has the exit Created in NX9.0.3. More... | |
| void | SetSelectToolFlag (bool selToolFlag) |
| Sets the user selected tool Created in NX5.0.0. More... | |
| NXOpen::CAM::PostEventsCiBuilder * | StartOfPath () |
| Returns the start event builder Created in NX5.0.1. More... | |
| NXOpen::CAM::UdeSet * | StartUdeSet () |
| Returns the start ude set Created in NX7.5.0. More... | |
| NXOpen::CAM::ToolChangeCiBuilder * | ToolChangeSetting () |
| Returns the tool change builder Created in NX5.0.0. More... | |
| NXOpen::CAM::ToolPathEditorBuilder * | ToolPathEditor () |
| Returns the Tool Path Editor Builder Created in NX9.0.3. More... | |
| NXOpen::CAM::ToolPathSplitParametersBuilder * | ToolPathSplitParametersBuilder () |
| Returns the tool path split Parameters Created in NX9.0.0. More... | |
| Public Member Functions inherited from NXOpen::CAM::ParamBuilder | |
| NXOpen::CAM::Ude * | CycleEvent () |
| Returns the cycle event Created in NX7.5.0. More... | |
| NXOpen::CAM::Cycle * | CycleTable () |
| Returns the cycle Created in NX9.0.0. More... | |
| NXOpen::TaggedObject * | GetCustomizableItemBuilder (const NXString &name) |
| Returns the customizable item builder for the given customizable item name. More... | |
| NXOpen::TaggedObject * | GetCustomizableItemBuilder (const char *name) |
| Returns the customizable item builder for the given customizable item name. More... | |
| std::vector< NXString > | GetCustomizableItemNames () |
| Returns the names for all customizable item ids. More... | |
| NXOpen::CAM::ParamBuilder::OptimizationTypes | OptimizationMethod () |
| Returns the optim method Created in NX5.0.0. More... | |
| void | SetOptimizationMethod (NXOpen::CAM::ParamBuilder::OptimizationTypes optimMethod) |
| Sets the optim method Created in NX5.0.0. More... | |
| Public Member Functions inherited from NXOpen::Builder | |
| NXOpen::NXObject * | Commit () |
| Commits any edits that have been applied to the builder. More... | |
| void | Destroy () |
| Deletes the builder, and cleans up any objects created by the builder. More... | |
| std::vector< NXOpen::NXObject * > | GetCommittedObjects () |
| For builders that create more than one object, this method returns the objects that are created by commit. More... | |
| NXOpen::NXObject * | GetObject () |
| Returns the object currently being edited by this builder. More... | |
| void | ShowResults () |
| Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
| virtual bool | Validate () |
| Validate whether the inputs to the component are sufficient for commit to be called. More... | |
| Public Member Functions inherited from NXOpen::TaggedObject | |
| tag_t | Tag () const |
| Returns the tag of this object. More... | |
Detailed Description
Represents a FinishTurning Builder
To create a new instance of this class, use NXOpen::CAM::OperationCollection::CreateFinishTurningBuilder
Created in NX6.0.0.
Member Function Documentation
| NXOpen::CAM::NcmTurnRoughFinishBuilder* NXOpen::CAM::FinishTurningBuilder::NonCuttingBuilder | ( | ) |
Returns the non-cutting builder
Created in NX6.0.0.
License requirements : None
The documentation for this class was generated from the following file:
- CAM_FinishTurningBuilder.hxx