Represents a turning feeds Builder
Created in NX5.0.0.
More...
Public Member Functions | |
| NXOpen::CAM::InheritableFeedBuilder * | ChamferFeed () |
| Returns the chamfer feed builder (inheritable Feed) Created in NX8.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | EngageSpindleSpeedBuilder () |
| Returns the engage spindle speed builder (inheritable Double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | EngageSpindleSpeedToggleBuilder () |
| Returns the engage spindle speed toggle builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedApproachBuilder () |
| Returns the feed_approach builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedCutBuilder () |
| Returns the feed_cut builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedDepartureBuilder () |
| Returns the feed_departure builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedEngageBuilder () |
| Returns the feed_engage builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedFirstCutBuilder () |
| Returns the feed_first_cut builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | FeedMaxApproachLengthBuilder () |
| Returns the feed_max_approach_length builder (inheritable Double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | FeedMaxApproachLengthFlagBuilder () |
| Returns the feed_max_approach_length_flag builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | FeedMinAccelerateDecelerateLengthBuilder () |
| Returns the feed_min_accelerate_decelerate_length builder (inheritable Double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | FeedMinAccelerateDecelerateLengthFlagBuilder () |
| Returns the feed_min_accelerate_decelerate_length_flag builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | FeedPerToothBuilder () |
| Returns the feed_per_tooth builder (inheritable Double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedRapidBuilder () |
| Returns the feed_rapid builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedModeBuilder * | FeedRapidOutput () |
| Returns the feed rapid output builder (inheritable Enum) Created in NX8.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateAccelerateBuilder () |
| Returns the feedrate_accelerate builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateAccelerateLengthBuilder () |
| Returns the feedrate_accelerate_length builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateCircCcwBuilder () |
| Returns the feedrate_circ_ccw builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateCircCwBuilder () |
| Returns the feedrate_circ_cw builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateCleanupCircCcwBuilder () |
| Returns the feedrate_cleanup_circ_ccw builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateCleanupCircCwBuilder () |
| Returns the feedrate_cleanup_circ_cw builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateCleanupCutBuilder () |
| Returns the feedrate_cleanup_cut builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateCleanupDiameterBuilder () |
| Returns the feedrate_cleanup_diameter builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateCleanupFaceBuilder () |
| Returns the feedrate_cleanup_face builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateCleanupLinearBuilder () |
| Returns the feedrate_cleanup_linear builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateClearBuilder () |
| Returns the feedrate_clear builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateDecelerateBuilder () |
| Returns the feedrate_decelerate builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateDecelerateLengthBuilder () |
| Returns the feedrate_decelerate_length builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateDiameterBuilder () |
| Returns the feedrate_diameter builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateFaceBuilder () |
| Returns the feedrate_face builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateFinishAccelerateBuilder () |
| Returns the feedrate_finish_accelerate builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateFinishAccelerateLengthBuilder () |
| Returns the feedrate_finish_accelerate_length builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateFinishDecelerateBuilder () |
| Returns the feedrate_finish_decelerate builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateFinishDecelerateLengthBuilder () |
| Returns the feedrate_finish_decelerate_length builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateFinishRampInBuilder () |
| Returns the feedrate_finish_ramp_in builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateFinishRampLevelBuilder () |
| Returns the feedrate_finish_ramp_level builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateFinishRampOutBuilder () |
| Returns the feedrate_finish_ramp_out builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateLinearBuilder () |
| Returns the feedrate_linear builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateProfileCutBuilder () |
| Returns the feedrate_profile_cut builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateRampInBuilder () |
| Returns the feedrate_ramp_in builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateRampLevelBuilder () |
| Returns the feedrate_ramp_level builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateRampOutBuilder () |
| Returns the feedrate_ramp_out builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedrateRoughLastCutBuilder () |
| Returns the feedrate_rough_last_cut builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | FeedrateRoughLastCutForEntirePassTogBuilder () |
| Returns the feedrate_rough_last_cut_for_entire_pass_tog builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedRetractBuilder () |
| Returns the feed_retract builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedReturnBuilder () |
| Returns the feed_return builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedSideCutBuilder () |
| Returns the feed_side_cut builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedStepoverBuilder () |
| Returns the feed_stepover builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | FeedTraversalBuilder () |
| Returns the feed_traversal builder (inheritable Feed) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableFeedBuilder * | RoundFeed () |
| Returns the round feed builder (inheritable Feed) Created in NX8.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | SpindleDirectionAutomaticBuilder () |
| Returns the spindle_direction_automatic builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | SpindleDirectionBuilder () |
| Returns the spindle direction builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | SpindleMaximumRpmBuilder () |
| Returns the spindle_maximum_rpm builder (inheritable Double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | SpindleModeBuilder () |
| Returns the spindle_mode builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | SpindlePresetRpmBuilder () |
| Returns the spindle_preset_rpm builder (inheritable Double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | SpindlePresetRpmToggleBuilder () |
| Returns the spindle_preset_rpm_toggle builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableTextBuilder * | SpindleRangeBuilder () |
| Returns the spindle_range builder (inheritable Text) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | SpindleRpmBuilder () |
| Returns the spindle_rpm builder (inheritable Double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | SpindleRpmToggleBuilder () |
| Returns the spindle_rpm_toggle builder (inheritable Int) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableTextBuilder * | SpindleTextBuilder () |
| Returns the spindle_text builder (inheritable Text) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableDoubleBuilder * | SurfaceSpeedBuilder () |
| Returns the surface_speed builder (inheritable Double) Created in NX5.0.0. More... | |
| NXOpen::CAM::InheritableIntBuilder * | ToolDirectionBuilder () |
| Returns the tool_direction builder (inheritable Int) Created in NX5.0.0. More... | |
 Public Member Functions inherited from NXOpen::TaggedObject | |
| tag_t | Tag () const |
| Returns the tag of this object. More... | |
Detailed Description
Represents a turning feeds Builder
Created in NX5.0.0.
Member Function Documentation
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::ChamferFeed | ( | ) |
Returns the chamfer feed builder (inheritable Feed)
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::EngageSpindleSpeedBuilder | ( | ) |
Returns the engage spindle speed builder (inheritable Double)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::EngageSpindleSpeedToggleBuilder | ( | ) |
Returns the engage spindle speed toggle builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedApproachBuilder | ( | ) |
Returns the feed_approach builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedCutBuilder | ( | ) |
Returns the feed_cut builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedDepartureBuilder | ( | ) |
Returns the feed_departure builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedEngageBuilder | ( | ) |
Returns the feed_engage builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedFirstCutBuilder | ( | ) |
Returns the feed_first_cut builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedMaxApproachLengthBuilder | ( | ) |
Returns the feed_max_approach_length builder (inheritable Double)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedMaxApproachLengthFlagBuilder | ( | ) |
Returns the feed_max_approach_length_flag builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedMinAccelerateDecelerateLengthBuilder | ( | ) |
Returns the feed_min_accelerate_decelerate_length builder (inheritable Double)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedMinAccelerateDecelerateLengthFlagBuilder | ( | ) |
Returns the feed_min_accelerate_decelerate_length_flag builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedPerToothBuilder | ( | ) |
Returns the feed_per_tooth builder (inheritable Double)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedRapidBuilder | ( | ) |
Returns the feed_rapid builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedModeBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedRapidOutput | ( | ) |
Returns the feed rapid output builder (inheritable Enum)
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateAccelerateBuilder | ( | ) |
Returns the feedrate_accelerate builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateAccelerateLengthBuilder | ( | ) |
Returns the feedrate_accelerate_length builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCircCcwBuilder | ( | ) |
Returns the feedrate_circ_ccw builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCircCwBuilder | ( | ) |
Returns the feedrate_circ_cw builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupCircCcwBuilder | ( | ) |
Returns the feedrate_cleanup_circ_ccw builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupCircCwBuilder | ( | ) |
Returns the feedrate_cleanup_circ_cw builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupCutBuilder | ( | ) |
Returns the feedrate_cleanup_cut builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupDiameterBuilder | ( | ) |
Returns the feedrate_cleanup_diameter builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupFaceBuilder | ( | ) |
Returns the feedrate_cleanup_face builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupLinearBuilder | ( | ) |
Returns the feedrate_cleanup_linear builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateClearBuilder | ( | ) |
Returns the feedrate_clear builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateDecelerateBuilder | ( | ) |
Returns the feedrate_decelerate builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateDecelerateLengthBuilder | ( | ) |
Returns the feedrate_decelerate_length builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateDiameterBuilder | ( | ) |
Returns the feedrate_diameter builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFaceBuilder | ( | ) |
Returns the feedrate_face builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishAccelerateBuilder | ( | ) |
Returns the feedrate_finish_accelerate builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishAccelerateLengthBuilder | ( | ) |
Returns the feedrate_finish_accelerate_length builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishDecelerateBuilder | ( | ) |
Returns the feedrate_finish_decelerate builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishDecelerateLengthBuilder | ( | ) |
Returns the feedrate_finish_decelerate_length builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishRampInBuilder | ( | ) |
Returns the feedrate_finish_ramp_in builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishRampLevelBuilder | ( | ) |
Returns the feedrate_finish_ramp_level builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishRampOutBuilder | ( | ) |
Returns the feedrate_finish_ramp_out builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateLinearBuilder | ( | ) |
Returns the feedrate_linear builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateProfileCutBuilder | ( | ) |
Returns the feedrate_profile_cut builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRampInBuilder | ( | ) |
Returns the feedrate_ramp_in builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRampLevelBuilder | ( | ) |
Returns the feedrate_ramp_level builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRampOutBuilder | ( | ) |
Returns the feedrate_ramp_out builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRoughLastCutBuilder | ( | ) |
Returns the feedrate_rough_last_cut builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRoughLastCutForEntirePassTogBuilder | ( | ) |
Returns the feedrate_rough_last_cut_for_entire_pass_tog builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedRetractBuilder | ( | ) |
Returns the feed_retract builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedReturnBuilder | ( | ) |
Returns the feed_return builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedSideCutBuilder | ( | ) |
Returns the feed_side_cut builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedStepoverBuilder | ( | ) |
Returns the feed_stepover builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedTraversalBuilder | ( | ) |
Returns the feed_traversal builder (inheritable Feed)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::RoundFeed | ( | ) |
Returns the round feed builder (inheritable Feed)
Created in NX8.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleDirectionAutomaticBuilder | ( | ) |
Returns the spindle_direction_automatic builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleDirectionBuilder | ( | ) |
Returns the spindle direction builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleMaximumRpmBuilder | ( | ) |
Returns the spindle_maximum_rpm builder (inheritable Double)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleModeBuilder | ( | ) |
Returns the spindle_mode builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindlePresetRpmBuilder | ( | ) |
Returns the spindle_preset_rpm builder (inheritable Double)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindlePresetRpmToggleBuilder | ( | ) |
Returns the spindle_preset_rpm_toggle builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableTextBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleRangeBuilder | ( | ) |
Returns the spindle_range builder (inheritable Text)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleRpmBuilder | ( | ) |
Returns the spindle_rpm builder (inheritable Double)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleRpmToggleBuilder | ( | ) |
Returns the spindle_rpm_toggle builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableTextBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleTextBuilder | ( | ) |
Returns the spindle_text builder (inheritable Text)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::SurfaceSpeedBuilder | ( | ) |
Returns the surface_speed builder (inheritable Double)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
| NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::ToolDirectionBuilder | ( | ) |
Returns the tool_direction builder (inheritable Int)
Created in NX5.0.0.
License requirements : cam_base ("CAM BASE")
The documentation for this class was generated from the following file:
- CAM_FeedsTurnBuilder.hxx