Represents a NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder which can be used to detect free element edges or non-manifold edges. More...

Inheritance diagram for NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder:

Classes
struct	EdgeDisplayStyle
	the display style of the edges detected More...

Public Types
enum	Scope { ScopeEntireModel, ScopeVisibleModel, ScopeSelectedModels }
	the Scope over which the Computation of free/non-manifold edges with be done More...

Public Member Functions
bool	CheckFreeEdges ()
	Returns the value indicating whether to check free edges or not Created in NX8.5.0. More...

bool	CheckNonManifoldEdges ()
	Returns the value indicating whether to check non-manifold edges or not Created in NX8.5.0. More...

virtual NXOpen::CAE::ModelCheck::CheckScope	CheckScopeOption ()
	Returns the check scope setting Created in NX11.0.1. More...

NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::Scope	ComputationScope ()
	Returns the computation scope Created in NX8.5.0. More...

void	DoCheck (std::vector< NXOpen::CAE::FEElemEdge * > &freeEdges, std::vector< NXOpen::CAE::FEElemEdge * > &nonManifoldEdges, std::vector< NXOpen::CAE::FEElement * > &assoElems, NXOpen::CAE::CaeGroup **outputGroup)
	Finds free edges when CAE::ModelCheck::ElementEdgeCheckBuilder::CheckFreeEdges and CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckFreeEdges is set, and non-manifold edges when CAE::ModelCheck::ElementEdgeCheckBuilder::CheckNonManifoldEdges and CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckNonManifoldEdges is set, returns the associated elements and output group for free and/or non-manifold element edges. More...

void	ExecuteCheck (std::vector< NXOpen::CAE::FEElemEdge * > &freeEdges, std::vector< NXOpen::CAE::FEElemEdge * > &nonManifoldEdges)
	Finds free edges when CAE::ModelCheck::ElementEdgeCheckBuilder::CheckFreeEdges and CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckFreeEdges is set, and non-manifold edges when CAE::ModelCheck::ElementEdgeCheckBuilder::CheckNonManifoldEdges and CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckNonManifoldEdges is set. More...

NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle	FreeEdgeDisplayStyle ()
	Returns the display style for free edges detected Created in NX8.5.0. More...

void	HideInputMeshes (bool hideInputMeshes)
	Hides or unhides the input meshes Created in NX8.5.0. More...

NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle	NonManifoldEdgeDisplayStyle ()
	Returns the displaying style for non-manifold edges detected Created in NX8.5.0. More...

NXOpen::SelectTaggedObjectList *	SelectionList ()
	Returns the selected objects to be checked. More...

void	SetCheckFreeEdges (bool checkFreeEdges)
	Sets the value indicating whether to check free edges or not Created in NX8.5.0. More...

void	SetCheckNonManifoldEdges (bool checkNonManifoldEdges)
	Sets the value indicating whether to check non-manifold edges or not Created in NX8.5.0. More...

virtual void	SetCheckScopeOption (NXOpen::CAE::ModelCheck::CheckScope scope)
	Sets the check scope setting Created in NX11.0.1. More...

void	SetComputationScope (NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::Scope computationScope)
	Sets the computation scope Created in NX8.5.0. More...

void	SetFreeEdgeDisplayStyle (const NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle &freeEdgesStyle)
	Sets the display style for free edges detected Created in NX8.5.0. More...

void	SetNonManifoldEdgeDisplayStyle (const NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle &nonManifoldEdgeStyle)
	Sets the displaying style for non-manifold edges detected Created in NX8.5.0. More...

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder. More...

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder. More...

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder which can be used to detect free element edges or non-manifold edges.

A free edge is any Element edge that is not shared by any other element face (on either 2D or 3D elements ) within the defined scope of the check. A non-manifold edge is any Element edge that is shared more than 2 element faces (on either 2D or 3D elements ) within the defined scope of the check.
The computation scope ElementEdgeCheckBuilder::ComputationScope and ElementEdgeCheckBuilder::SetComputationScope will affect on the checking result. The free element edges or non-manifold edges found will be displayed using the display setting NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle . You can execute checking through Builder::Commit or NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::ExecuteCheck . Commiting the builder performs checking and displays the free edges and non-manifold edges in graphic window.
To create a new instance of this class, use NXOpen::CAE::ModelCheckManager::CreateElementEdgeCheckBuilder

Created in NX8.5.0.

Member Enumeration Documentation

enum NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::Scope

the Scope over which the Computation of free/non-manifold edges with be done

Enumerator
ScopeEntireModel	Takes all elements in the model into account while computing.
ScopeVisibleModel	Only takes visible elements into account while computing.
ScopeSelectedModels	Only takes selected elements into account while computing.

Member Function Documentation

bool NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::CheckFreeEdges ( )

Returns the value indicating whether to check free edges or not
Created in NX8.5.0.

License requirements : None

bool NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::CheckNonManifoldEdges ( )

Returns the value indicating whether to check non-manifold edges or not
Created in NX8.5.0.

License requirements : None

virtual NXOpen::CAE::ModelCheck::CheckScope NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::CheckScopeOption ( )

virtual

Returns the check scope setting
Created in NX11.0.1.

License requirements : None

Implements NXOpen::CAE::ModelCheck::ISelectionBuilder.

NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::Scope NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::ComputationScope ( )

Returns the computation scope
Created in NX8.5.0.

License requirements : None

void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::DoCheck	(	std::vector< NXOpen::CAE::FEElemEdge * > &	freeEdges,
		std::vector< NXOpen::CAE::FEElemEdge * > &	nonManifoldEdges,
		std::vector< NXOpen::CAE::FEElement * > &	assoElems,
		NXOpen::CAE::CaeGroup **	outputGroup
	)

Finds free edges when CAE::ModelCheck::ElementEdgeCheckBuilder::CheckFreeEdges and CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckFreeEdges is set, and non-manifold edges when CAE::ModelCheck::ElementEdgeCheckBuilder::CheckNonManifoldEdges and CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckNonManifoldEdges is set, returns the associated elements and output group for free and/or non-manifold element edges.

For the associated elements, if both checks are done at the same time, the elements associated to free edges are returned firstly in the list.

Created in NX11.0.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

freeEdges	free element edges
nonManifoldEdges	non-manifold element edges
assoElems	associated elements for free and/or non-manifold element edges, if both checks are done at the same time, the elements associated to free edges are returned firstly in the list.
outputGroup	output group for free and/or non-manifold element edges

void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::ExecuteCheck	(	std::vector< NXOpen::CAE::FEElemEdge * > &	freeEdges,
		std::vector< NXOpen::CAE::FEElemEdge * > &	nonManifoldEdges
	)

Finds free edges when CAE::ModelCheck::ElementEdgeCheckBuilder::CheckFreeEdges and CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckFreeEdges is set, and non-manifold edges when CAE::ModelCheck::ElementEdgeCheckBuilder::CheckNonManifoldEdges and CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckNonManifoldEdges is set.

The method Builder::Commit will also do the same thing, but display the element edges instead of returning them.

Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

freeEdges	free element edges
nonManifoldEdges	non-manifold element edges

NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::FreeEdgeDisplayStyle ( )

Returns the display style for free edges detected
Created in NX8.5.0.

License requirements : None

void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::HideInputMeshes ( bool hideInputMeshes )

Hides or unhides the input meshes
Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

hideInputMeshes hideinputmeshes

NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::NonManifoldEdgeDisplayStyle ( )

Returns the displaying style for non-manifold edges detected
Created in NX8.5.0.

License requirements : None

NXOpen::SelectTaggedObjectList* NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::SelectionList ( )

Returns the selected objects to be checked.

The objects must be NXOpen::CAE::Mesh or NXOpen::CAE::FEElement
Created in NX8.5.0.

License requirements : None

void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckFreeEdges ( bool checkFreeEdges )

Sets the value indicating whether to check free edges or not
Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

checkFreeEdges checkfreeedges

void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckNonManifoldEdges ( bool checkNonManifoldEdges )

Sets the value indicating whether to check non-manifold edges or not
Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

checkNonManifoldEdges checknonmanifoldedges

virtual void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::SetCheckScopeOption ( NXOpen::CAE::ModelCheck::CheckScope scope )

virtual

Sets the check scope setting
Created in NX11.0.1.

License requirements : None

Parameters

scope scope

Implements NXOpen::CAE::ModelCheck::ISelectionBuilder.

void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::SetComputationScope ( NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::Scope computationScope )

Sets the computation scope
Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

computationScope computationscope

void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::SetFreeEdgeDisplayStyle ( const NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle & freeEdgesStyle )

Sets the display style for free edges detected
Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

freeEdgesStyle freeedgesstyle

void NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::SetNonManifoldEdgeDisplayStyle ( const NXOpen::CAE::ModelCheck::ElementEdgeCheckBuilder::EdgeDisplayStyle & nonManifoldEdgeStyle )

Sets the displaying style for non-manifold edges detected
Created in NX8.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

nonManifoldEdgeStyle nonmanifoldedgestyle

The documentation for this class was generated from the following file:

CAE_ModelCheck_ElementEdgeCheckBuilder.hxx

Classes

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation