HolePackageBuilder Class¶
-
class
NXOpen.Features.
HolePackageBuilder
¶ Bases:
NXOpen.Features.FeatureBuilder
Represents a
NXOpen.Features.HolePackage
builder.Inputs to this class can be convergent objects. To create a new instance of this class, use
NXOpen.Features.FeatureCollection.CreateHolePackageBuilder()
Default values.
Property Value BooleanOperation.Type Subtract DepthOption ToCylinderBottom DrillSizeEndChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) DrillSizeEndChamferEnabled true DrillSizeEndChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) DrillSizeHoleDepth.Value 50.0 (millimeters part), 2.0 (inches part) DrillSizeHoleDiameter.Value 11.0 (millimeters part), 0.4 (inches part) DrillSizeStartChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) DrillSizeStartChamferEnabled true DrillSizeStartChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) DrillSizeTipAngle.Value 118 EndHoleData.BooleanOperation.Type Subtract EndHoleData.DepthOption ToCylinderBottom EndHoleData.HoleDepth.Value 50.0 (millimeters part), 2.0 (inches part) EndHoleData.HoleDiameter.Value 25.0 (millimeters part), 1.0 (inches part) EndHoleData.MatchDimOfStartHole true EndHoleData.ScrewClearanceEndChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) EndHoleData.ScrewClearanceEndChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) EndHoleData.ScrewClearanceStartChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) EndHoleData.ScrewClearanceStartChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) EndHoleData.TapDrillDiameter.Value 8.5 (millimeters part), 0.34 (inches part) EndHoleData.ThreadDepth.Value 25.0 (millimeters part), 1.0 (inches part) EndHoleData.ThreadLengthOption Custom EndHoleData.ThreadedEndChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) EndHoleData.ThreadedEndChamferDiameter.Value 10.0 (millimeters part), 0.4 (inches part) EndHoleData.ThreadedReliefAngle.Value 118.0 (millimeters part), 118.0 (inches part) EndHoleData.ThreadedReliefChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) EndHoleData.ThreadedReliefChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) EndHoleData.ThreadedReliefDepth.Value 5.0 (millimeters part), 0.2 (inches part) EndHoleData.ThreadedReliefDiameter.Value 10.0 (millimeters part), 0.4 (inches part) EndHoleData.ThreadedStartChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) EndHoleData.ThreadedStartChamferDiameter.Value 10.0 (millimeters part), 0.4 (inches part) EndHoleData.TipAngle.Value 118 GeneralCounterboreDepth.Value 25.0 (millimeters part), 1.0 (inches part) GeneralCounterboreDiameter.Value 38.0 (millimeters part), 1.5 (inches part) GeneralCounterboreHoleDepth.Value 50.0 (millimeters part), 2.0 (inches part) GeneralCounterboreHoleDiameter.Value 25.0 (millimeters part), 1.0 (inches part) GeneralCountersinkAngle.Value 90 (millimeters part), 82 (inches part) GeneralCountersinkDiameter.Value 50.0 (millimeters part), 2.0 (inches part) GeneralCountersinkHoleDepth.Value 50.0 (millimeters part), 2.0 (inches part) GeneralCountersinkHoleDiameter.Value 25.0 (millimeters part), 1.0 (inches part) GeneralHoleForm Simple GeneralSimpleHoleDepth.Value 50.0 (millimeters part), 2.0 (inches part) GeneralSimpleHoleDiameter.Value 25.0 (millimeters part), 1.0 (inches part) GeneralTaperAngle.Value 10 GeneralTaperedHoleDepth.Value 50.0 (millimeters part), 2.0 (inches part) GeneralTaperedHoleDiameter.Value 25.0 (millimeters part), 1.0 (inches part) GeneralTipAngle.Value 118 (millimeters part), 118 (inches part) MiddleHoleData.BooleanOperation.Type Subtract MiddleHoleData.EndChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) MiddleHoleData.EndChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) MiddleHoleData.HoleDiameter.Value 25.0 (millimeters part), 1.0 (inches part) MiddleHoleData.MatchDimOfStartHole true MiddleHoleData.StartChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) MiddleHoleData.StartChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) ScrewClearanceCounterboreDepth.Value 10.8 (millimeters part), 0.43 (inches part) ScrewClearanceCounterboreDiameter.Value 18.0 (millimeters part), 0.72 (inches part) ScrewClearanceCountersinkAngle.Value 90 (millimeters part), 82 (inches part) ScrewClearanceCountersinkDiameter.Value 22.73 (millimeters part), 0.91 (inches part) ScrewClearanceEndChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) ScrewClearanceEndChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) ScrewClearanceHoleDepth.Value 50.0 (millimeters part), 2.0 (inches part) ScrewClearanceHoleDiameter.Value 11.0 (millimeters part), 0.4 (inches part) ScrewClearanceHoleForm Simple ScrewClearanceNeckChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) ScrewClearanceNeckChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) ScrewClearanceReliefDepth.Value 1.2 (millimeters part), 0.05 (inches part) ScrewClearanceStartChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) ScrewClearanceStartChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) ScrewClearanceTipAngle.Value 118 StartExtensionEnabled True StartHoleData.BooleanOperation.Type Subtract StartHoleData.CounterboreDepth.Value 25.0 (millimeters part), 1.0 (inches part) StartHoleData.CounterboreDiameter.Value 38.0 (millimeters part), 1.5 (inches part) StartHoleData.CountersinkAngle.Value 90 (millimeters part), 82 (inches part) StartHoleData.CountersinkDiameter.Value 50.0 (millimeters part), 2.0 (inches part) StartHoleData.EndChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) StartHoleData.EndChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) StartHoleData.HoleDiameter.Value 25.0 (millimeters part), 1.0 (inches part) StartHoleData.HoleForm Simple StartHoleData.NeckChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) StartHoleData.NeckChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) StartHoleData.ReliefDepth.Value 1.2 (millimeters part), 0.05 (inches part) StartHoleData.StartChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) StartHoleData.StartChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) TapDrillDiameter.Value 8.5 (millimeters part), 0.34 (inches part) ThreadDepth.Value 25.0 (millimeters part), 1.0 (inches part) ThreadLengthOption Custom ThreadRotation Right ThreadedEndChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) ThreadedEndChamferDiameter.Value 10.0 (millimeters part), 0.4 (inches part) ThreadedHoleDepth.Value 50.0 (millimeters part), 2.0 (inches part) ThreadedReliefAngle.Value 118.0 (millimeters part), 118.0 (inches part) ThreadedReliefChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) ThreadedReliefChamferOffset.Value 0.6 (millimeters part), 0.024 (inches part) ThreadedReliefDepth.Value 5.0 (millimeters part), 0.2 (inches part) ThreadedReliefDiameter.Value 10.0 (millimeters part), 0.4 (inches part) ThreadedStartChamferAngle.Value 45.0 (millimeters part), 45.0 (inches part) ThreadedStartChamferDiameter.Value 10.0 (millimeters part), 0.4 (inches part) ThreadedTipAngle.Value 118 (millimeters part), 118 (inches part) Type GeneralHole New in version NX5.0.2.
Properties¶
Property | Description |
---|---|
BooleanOperation | Returns the boolean operation |
DepthOption | Returns or sets the hole depth option |
DrillSize | Returns or sets the drill size - this is applicable for drill size hole |
DrillSizeEndChamferAngle | Returns the drill size end chamfer angle - this is applicable for drill size hole type |
DrillSizeEndChamferEnabled | Returns or sets the drill size end chamfer enabled - this is applicable for drill size hole type |
DrillSizeEndChamferOffset | Returns the drill size end chamfer offset - this is applicable for drill size hole type |
DrillSizeFitOption | Returns or sets the drill size screw fit Option - this is applicable for drill size hole |
DrillSizeHoleDepth | Returns the hole depth - this is applicable for drill size hole |
DrillSizeHoleDiameter | Returns the hole diameter - this is applicable for drill size hole |
DrillSizeStandard | Returns or sets the drill size standard - this is applicable for drill size hole type |
DrillSizeStartChamferAngle | Returns the drill size start chamfer angle - this is applicable for drill size hole type |
DrillSizeStartChamferEnabled | Returns or sets the drill size start chamfer enabled - this is applicable for drill size hole type |
DrillSizeStartChamferOffset | Returns the drill size start chamfer offset - this is applicable for drill size hole type |
DrillSizeTipAngle | Returns the tip angle - this is applicable for drill size hole |
EndHoleData | Returns the target body |
GeneralCounterboreDepth | Returns the counter bore depth - this is applicable for general hole |
GeneralCounterboreDiameter | Returns the counter bore diameter - this is applicable for general hole |
GeneralCounterboreHoleDepth | Returns the counterbore hole depth - this is applicable for general hole counterbore form |
GeneralCounterboreHoleDiameter | Returns the counterbore hole diameter - this is applicable for general hole counterbore form |
GeneralCountersinkAngle | Returns the counter sink angle - this is applicable for general hole |
GeneralCountersinkDiameter | Returns the counter sink diameter - this is applicable for general hole |
GeneralCountersinkHoleDepth | Returns the countersink hole depth - this is applicable for general hole countersink form |
GeneralCountersinkHoleDiameter | Returns the countersink hole diameter - this is applicable for general hole countersink form |
GeneralHoleForm | Returns or sets the hole form - this is applicable for general hole |
GeneralSimpleHoleDepth | Returns the simple hole depth - this is applicable for general hole simple form |
GeneralSimpleHoleDiameter | Returns the simple hole diameter - this is applicable for general hole simple form |
GeneralTaperAngle | Returns the taper angle - this is applicable for general hole |
GeneralTaperedHoleDepth | Returns the tapered hole depth - this is applicable for general hole tapered form |
GeneralTaperedHoleDiameter | Returns the tapered hole diameter - this is applicable for general hole tapered form |
GeneralTipAngle | Returns the tip angle - this is applicable for general hole |
HoleDepthLimitOption | Returns or sets the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type |
HolePosition | Returns the hole position |
MiddleHoleData | Returns the target body |
NeckChamferEnabled | Returns or sets the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form |
ParentFeatureInternal | Returns or sets whether or not the latest timestamped parent feature of this feature should be made internal |
PatchSolutionFlag | Returns or sets the patch solution flag |
PatchSurfaceFilename | Returns or sets the patch surface filename |
ProjectionDirection | Returns the hole direction options |
RadialEngageOption | Returns or sets the radial engage option - this is applicable for screw clearence hole |
ReliefChamferEnabled | Returns or sets the threaded relief chamfer enabled - this is applicable for threaded hole type |
ScrewClearanceCounterboreDepth | Returns the counter bore depth - this is applicable for screw clearence hole |
ScrewClearanceCounterboreDiameter | Returns the counter bore diameter - this is applicable for screw clearence hole |
ScrewClearanceCountersinkAngle | Returns the counter sink angle - this is applicable for screw clearence hole |
ScrewClearanceCountersinkDiameter | Returns the counter sink diameter - this is applicable for screw clearence hole |
ScrewClearanceEndChamferAngle | Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type |
ScrewClearanceEndChamferEnabled | Returns or sets the end chamfer enabled - this is applicable for screw clearance hole type |
ScrewClearanceEndChamferOffset | Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type |
ScrewClearanceHoleDepth | Returns the hole depth - this is applicable for screw clearance hole |
ScrewClearanceHoleDiameter | Returns the hole diameter - this is applicable for screw clearence hole |
ScrewClearanceHoleForm | Returns or sets the hole form - this is applicable for screw clearance hole |
ScrewClearanceNeckChamferAngle | Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form |
ScrewClearanceNeckChamferOffset | Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form |
ScrewClearanceReliefDepth | Returns the relief depth - this is applicable for screw clearence hole type |
ScrewClearanceReliefEnabled | Returns or sets the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type |
ScrewClearanceStartChamferAngle | Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type |
ScrewClearanceStartChamferEnabled | Returns or sets the screw clearance start chamfer enabled - this is applicable for screw clearance hole type |
ScrewClearanceStartChamferOffset | Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type |
ScrewClearanceTipAngle | Returns the tip angle - this is applicable for screw clearance hole |
ScrewFitOption | Returns or sets the screw fit Option - this is applicable for screw clearence hole |
ScrewSize | Returns or sets the screw size - this is applicable for screw clearence hole |
ScrewStandard | Returns or sets the screw standard - this is applicable for screw clearence hole type |
ScrewType | Returns or sets the screw type - this is applicable for screw clearence hole |
StartExtensionEnabled | Returns or sets the extend start enabled - this is applicable for start extension to all hole types |
StartHoleData | Returns the start target body |
SurroundingPatchSurfaceFilename | Returns or sets the surrounding patch surface filename |
Tag | Returns the Tag for this object. |
TapDrillDiameter | Returns the tap drill diameter - this is applicable for threaded hole |
ThreadDepth | Returns the thread depth - this is applicable for threaded hole |
ThreadLengthOption | Returns or sets the thread length option - this is applicable for threaded hole |
ThreadRotation | Returns or sets the thread rotation - this is applicable for threaded hole |
ThreadSize | Returns or sets the thread size - this is applicable for threaded hole |
ThreadStandard | Returns or sets the thread standard - this is applicable for threaded hole type |
ThreadedEndChamferAngle | Returns the threaded end chamfer angle - this is applicable for threaded hole type |
ThreadedEndChamferDiameter | Returns the threaded end chamfer offset - this is applicable for threaded hole type |
ThreadedEndChamferEnabled | Returns or sets the threaded end chamfer enabled - this is applicable for threaded hole type |
ThreadedHoleDepth | Returns the hole depth - this is applicable for threaded hole |
ThreadedReliefAngle | Returns the relief angle - this is applicable for threaded hole type |
ThreadedReliefChamferAngle | Returns the threaded relief chamfer angle - this is applicable for threaded hole type |
ThreadedReliefChamferOffset | Returns the threaded relief chamfer offset - this is applicable for threaded hole type |
ThreadedReliefDepth | Returns the threaded relief depth - this is applicable for threaded hole type |
ThreadedReliefDiameter | Returns the relief diameter - this is applicable for threaded hole type |
ThreadedReliefEnabled | Returns or sets the threaded relief enabled - this is applicable for threaded hole type |
ThreadedStartChamferAngle | Returns the threaded start chamfer angle - this is applicable for threaded hole type |
ThreadedStartChamferDiameter | Returns the threaded start chamfer offset - this is applicable for threaded hole type |
ThreadedStartChamferEnabled | Returns or sets the threaded start chamfer enabled - this is applicable for threaded hole type |
ThreadedTipAngle | Returns the tip angle - this is applicable for threaded hole |
Tolerance | Returns or sets the distance tolerance |
Type | Returns or sets the type |
UntilSelectedTarget | Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type |
Methods¶
Method | Description |
---|---|
Commit | Commits any edits that have been applied to the builder. |
CommitFeature | Commits the feature parameters and creates the feature |
Destroy | Deletes the builder, and cleans up any objects created by the builder. |
GetCommittedObjects | For builders that create more than one object, this method returns the objects that are created by commit. |
GetFeature | Returns the feature currently being edited by this builder. |
GetObject | Returns the object currently being edited by this builder. |
HideInternalParentFeatureAfterEdit | Re-suppress an internal parent feature (a slave feature) after it has been edited. |
SetParentFeatureInternal | Set the parent features which would be internal or slaves to the feature being created or commited |
ShowInternalParentFeatureForEdit | Unsuppress an internal parent feature (a slave feature) so it can be edited. |
ShowResults | Updates the model to reflect the result of an edit to the model for all builders that support showing results. |
UnsetParentFeatureInternal | Set the internal parent feature of the feature being edited to external |
Validate | Validate whether the inputs to the component are sufficient for commit to be called. |
Enumerations¶
HolePackageBuilderHoleDepthLimitOptions Enumeration | Represents hole depth limit options. |
HolePackageBuilderHoleDepthOptions Enumeration | Represents hole depth specification options. |
HolePackageBuilderHoleForms Enumeration | Represents hole form options. |
HolePackageBuilderThreadLengthOptions Enumeration | Represents thread length options. |
HolePackageBuilderThreadRotationOptions Enumeration | Represents thread rotation options. |
HolePackageBuilderTypes Enumeration | Represents hole types. |
Property Detail¶
BooleanOperation¶
-
HolePackageBuilder.
BooleanOperation
¶ Returns the boolean operation
-------------------------------------
Getter Method
Signature
BooleanOperation
Returns: Return type: NXOpen.GeometricUtilities.BooleanOperation
New in version NX5.0.2.
License requirements: None.
DepthOption¶
-
HolePackageBuilder.
DepthOption
¶ Returns or sets the hole depth option
-------------------------------------
Getter Method
Signature
DepthOption
Returns: Return type: NXOpen.Features.HolePackageBuilderHoleDepthOptions
New in version NX11.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DepthOption
Parameters: depthOption ( NXOpen.Features.HolePackageBuilderHoleDepthOptions
) –New in version NX11.0.0.
License requirements: solid_modeling (“SOLIDS MODELING”)
DrillSize¶
-
HolePackageBuilder.
DrillSize
¶ Returns or sets the drill size - this is applicable for drill size hole
-------------------------------------
Getter Method
Signature
DrillSize
Returns: Return type: str New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DrillSize
Parameters: drillSize (str) – New in version NX6.0.0.
License requirements: solid_modeling (“SOLIDS MODELING”)
DrillSizeEndChamferAngle¶
-
HolePackageBuilder.
DrillSizeEndChamferAngle
¶ Returns the drill size end chamfer angle - this is applicable for drill size hole type
-------------------------------------
Getter Method
Signature
DrillSizeEndChamferAngle
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
DrillSizeEndChamferEnabled¶
-
HolePackageBuilder.
DrillSizeEndChamferEnabled
¶ Returns or sets the drill size end chamfer enabled - this is applicable for drill size hole type
-------------------------------------
Getter Method
Signature
DrillSizeEndChamferEnabled
Returns: Return type: bool New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DrillSizeEndChamferEnabled
Parameters: drillSizeEndChamferEnabled (bool) – New in version NX6.0.0.
License requirements: solid_modeling (“SOLIDS MODELING”)
DrillSizeEndChamferOffset¶
-
HolePackageBuilder.
DrillSizeEndChamferOffset
¶ Returns the drill size end chamfer offset - this is applicable for drill size hole type
-------------------------------------
Getter Method
Signature
DrillSizeEndChamferOffset
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
DrillSizeFitOption¶
-
HolePackageBuilder.
DrillSizeFitOption
¶ Returns or sets the drill size screw fit Option - this is applicable for drill size hole
-------------------------------------
Getter Method
Signature
DrillSizeFitOption
Returns: Return type: str New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DrillSizeFitOption
Parameters: drillSizeFitOption (str) – New in version NX6.0.0.
License requirements: solid_modeling (“SOLIDS MODELING”)
DrillSizeHoleDepth¶
-
HolePackageBuilder.
DrillSizeHoleDepth
¶ Returns the hole depth - this is applicable for drill size hole
-------------------------------------
Getter Method
Signature
DrillSizeHoleDepth
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
DrillSizeHoleDiameter¶
-
HolePackageBuilder.
DrillSizeHoleDiameter
¶ Returns the hole diameter - this is applicable for drill size hole
-------------------------------------
Getter Method
Signature
DrillSizeHoleDiameter
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
DrillSizeStandard¶
-
HolePackageBuilder.
DrillSizeStandard
¶ Returns or sets the drill size standard - this is applicable for drill size hole type
-------------------------------------
Getter Method
Signature
DrillSizeStandard
Returns: Return type: str New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DrillSizeStandard
Parameters: drillSizeStandard (str) – New in version NX6.0.0.
License requirements: solid_modeling (“SOLIDS MODELING”)
DrillSizeStartChamferAngle¶
-
HolePackageBuilder.
DrillSizeStartChamferAngle
¶ Returns the drill size start chamfer angle - this is applicable for drill size hole type
-------------------------------------
Getter Method
Signature
DrillSizeStartChamferAngle
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
DrillSizeStartChamferEnabled¶
-
HolePackageBuilder.
DrillSizeStartChamferEnabled
¶ Returns or sets the drill size start chamfer enabled - this is applicable for drill size hole type
-------------------------------------
Getter Method
Signature
DrillSizeStartChamferEnabled
Returns: Return type: bool New in version NX6.0.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
DrillSizeStartChamferEnabled
Parameters: drillSizeStartChamferEnabled (bool) – New in version NX6.0.0.
License requirements: solid_modeling (“SOLIDS MODELING”)
DrillSizeStartChamferOffset¶
-
HolePackageBuilder.
DrillSizeStartChamferOffset
¶ Returns the drill size start chamfer offset - this is applicable for drill size hole type
-------------------------------------
Getter Method
Signature
DrillSizeStartChamferOffset
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
DrillSizeTipAngle¶
-
HolePackageBuilder.
DrillSizeTipAngle
¶ Returns the tip angle - this is applicable for drill size hole
-------------------------------------
Getter Method
Signature
DrillSizeTipAngle
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
EndHoleData¶
-
HolePackageBuilder.
EndHoleData
¶ Returns the target body
-------------------------------------
Getter Method
Signature
EndHoleData
Returns: Return type: NXOpen.GeometricUtilities.EndHoleData
New in version NX5.0.2.
License requirements: None.
GeneralCounterboreDepth¶
-
HolePackageBuilder.
GeneralCounterboreDepth
¶ Returns the counter bore depth - this is applicable for general hole
-------------------------------------
Getter Method
Signature
GeneralCounterboreDepth
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
GeneralCounterboreDiameter¶
-
HolePackageBuilder.
GeneralCounterboreDiameter
¶ Returns the counter bore diameter - this is applicable for general hole
-------------------------------------
Getter Method
Signature
GeneralCounterboreDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
GeneralCounterboreHoleDepth¶
-
HolePackageBuilder.
GeneralCounterboreHoleDepth
¶ Returns the counterbore hole depth - this is applicable for general hole counterbore form
-------------------------------------
Getter Method
Signature
GeneralCounterboreHoleDepth
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralCounterboreHoleDiameter¶
-
HolePackageBuilder.
GeneralCounterboreHoleDiameter
¶ Returns the counterbore hole diameter - this is applicable for general hole counterbore form
-------------------------------------
Getter Method
Signature
GeneralCounterboreHoleDiameter
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralCountersinkAngle¶
-
HolePackageBuilder.
GeneralCountersinkAngle
¶ Returns the counter sink angle - this is applicable for general hole
-------------------------------------
Getter Method
Signature
GeneralCountersinkAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
GeneralCountersinkDiameter¶
-
HolePackageBuilder.
GeneralCountersinkDiameter
¶ Returns the counter sink diameter - this is applicable for general hole
-------------------------------------
Getter Method
Signature
GeneralCountersinkDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
GeneralCountersinkHoleDepth¶
-
HolePackageBuilder.
GeneralCountersinkHoleDepth
¶ Returns the countersink hole depth - this is applicable for general hole countersink form
-------------------------------------
Getter Method
Signature
GeneralCountersinkHoleDepth
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralCountersinkHoleDiameter¶
-
HolePackageBuilder.
GeneralCountersinkHoleDiameter
¶ Returns the countersink hole diameter - this is applicable for general hole countersink form
-------------------------------------
Getter Method
Signature
GeneralCountersinkHoleDiameter
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralHoleForm¶
-
HolePackageBuilder.
GeneralHoleForm
¶ Returns or sets the hole form - this is applicable for general hole
-------------------------------------
Getter Method
Signature
GeneralHoleForm
Returns: Return type: NXOpen.Features.HolePackageBuilderHoleForms
New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
GeneralHoleForm
Parameters: holeForm ( NXOpen.Features.HolePackageBuilderHoleForms
) –New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
GeneralSimpleHoleDepth¶
-
HolePackageBuilder.
GeneralSimpleHoleDepth
¶ Returns the simple hole depth - this is applicable for general hole simple form
-------------------------------------
Getter Method
Signature
GeneralSimpleHoleDepth
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralSimpleHoleDiameter¶
-
HolePackageBuilder.
GeneralSimpleHoleDiameter
¶ Returns the simple hole diameter - this is applicable for general hole simple form
-------------------------------------
Getter Method
Signature
GeneralSimpleHoleDiameter
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralTaperAngle¶
-
HolePackageBuilder.
GeneralTaperAngle
¶ Returns the taper angle - this is applicable for general hole
-------------------------------------
Getter Method
Signature
GeneralTaperAngle
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralTaperedHoleDepth¶
-
HolePackageBuilder.
GeneralTaperedHoleDepth
¶ Returns the tapered hole depth - this is applicable for general hole tapered form
-------------------------------------
Getter Method
Signature
GeneralTaperedHoleDepth
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralTaperedHoleDiameter¶
-
HolePackageBuilder.
GeneralTaperedHoleDiameter
¶ Returns the tapered hole diameter - this is applicable for general hole tapered form
-------------------------------------
Getter Method
Signature
GeneralTaperedHoleDiameter
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
GeneralTipAngle¶
-
HolePackageBuilder.
GeneralTipAngle
¶ Returns the tip angle - this is applicable for general hole
-------------------------------------
Getter Method
Signature
GeneralTipAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
HoleDepthLimitOption¶
-
HolePackageBuilder.
HoleDepthLimitOption
¶ Returns or sets the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type
-------------------------------------
Getter Method
Signature
HoleDepthLimitOption
Returns: Return type: NXOpen.Features.HolePackageBuilderHoleDepthLimitOptions
New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
HoleDepthLimitOption
Parameters: holeDepthLimitOption ( NXOpen.Features.HolePackageBuilderHoleDepthLimitOptions
) –New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
HolePosition¶
-
HolePackageBuilder.
HolePosition
¶ Returns the hole position
-------------------------------------
Getter Method
Signature
HolePosition
Returns: Return type: NXOpen.Section
New in version NX5.0.2.
License requirements: None.
MiddleHoleData¶
-
HolePackageBuilder.
MiddleHoleData
¶ Returns the target body
-------------------------------------
Getter Method
Signature
MiddleHoleData
Returns: Return type: NXOpen.GeometricUtilities.MiddleHoleData
New in version NX5.0.2.
License requirements: None.
NeckChamferEnabled¶
-
HolePackageBuilder.
NeckChamferEnabled
¶ Returns or sets the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form
-------------------------------------
Getter Method
Signature
NeckChamferEnabled
Returns: Return type: bool New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
NeckChamferEnabled
Parameters: neckChamferEnabled (bool) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ProjectionDirection¶
-
HolePackageBuilder.
ProjectionDirection
¶ Returns the hole direction options
-------------------------------------
Getter Method
Signature
ProjectionDirection
Returns: Return type: NXOpen.GeometricUtilities.ProjectionOptions
New in version NX5.0.2.
License requirements: None.
RadialEngageOption¶
-
HolePackageBuilder.
RadialEngageOption
¶ Returns or sets the radial engage option - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
RadialEngageOption
Returns: Return type: str New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
RadialEngageOption
Parameters: radialEngageOption (str) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ReliefChamferEnabled¶
-
HolePackageBuilder.
ReliefChamferEnabled
¶ Returns or sets the threaded relief chamfer enabled - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ReliefChamferEnabled
Returns: Return type: bool New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ReliefChamferEnabled
Parameters: reliefChamferEnabled (bool) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ScrewClearanceCounterboreDepth¶
-
HolePackageBuilder.
ScrewClearanceCounterboreDepth
¶ Returns the counter bore depth - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
ScrewClearanceCounterboreDepth
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceCounterboreDiameter¶
-
HolePackageBuilder.
ScrewClearanceCounterboreDiameter
¶ Returns the counter bore diameter - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
ScrewClearanceCounterboreDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceCountersinkAngle¶
-
HolePackageBuilder.
ScrewClearanceCountersinkAngle
¶ Returns the counter sink angle - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
ScrewClearanceCountersinkAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceCountersinkDiameter¶
-
HolePackageBuilder.
ScrewClearanceCountersinkDiameter
¶ Returns the counter sink diameter - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
ScrewClearanceCountersinkDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceEndChamferAngle¶
-
HolePackageBuilder.
ScrewClearanceEndChamferAngle
¶ Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type
-------------------------------------
Getter Method
Signature
ScrewClearanceEndChamferAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceEndChamferEnabled¶
-
HolePackageBuilder.
ScrewClearanceEndChamferEnabled
¶ Returns or sets the end chamfer enabled - this is applicable for screw clearance hole type
-------------------------------------
Getter Method
Signature
ScrewClearanceEndChamferEnabled
Returns: Return type: bool New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ScrewClearanceEndChamferEnabled
Parameters: screwClearanceEndChamferEnabled (bool) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ScrewClearanceEndChamferOffset¶
-
HolePackageBuilder.
ScrewClearanceEndChamferOffset
¶ Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type
-------------------------------------
Getter Method
Signature
ScrewClearanceEndChamferOffset
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceHoleDepth¶
-
HolePackageBuilder.
ScrewClearanceHoleDepth
¶ Returns the hole depth - this is applicable for screw clearance hole
-------------------------------------
Getter Method
Signature
ScrewClearanceHoleDepth
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
ScrewClearanceHoleDiameter¶
-
HolePackageBuilder.
ScrewClearanceHoleDiameter
¶ Returns the hole diameter - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
ScrewClearanceHoleDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceHoleForm¶
-
HolePackageBuilder.
ScrewClearanceHoleForm
¶ Returns or sets the hole form - this is applicable for screw clearance hole
-------------------------------------
Getter Method
Signature
ScrewClearanceHoleForm
Returns: Return type: NXOpen.Features.HolePackageBuilderHoleForms
New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ScrewClearanceHoleForm
Parameters: holeForm ( NXOpen.Features.HolePackageBuilderHoleForms
) –New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ScrewClearanceNeckChamferAngle¶
-
HolePackageBuilder.
ScrewClearanceNeckChamferAngle
¶ Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form
-------------------------------------
Getter Method
Signature
ScrewClearanceNeckChamferAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceNeckChamferOffset¶
-
HolePackageBuilder.
ScrewClearanceNeckChamferOffset
¶ Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form
-------------------------------------
Getter Method
Signature
ScrewClearanceNeckChamferOffset
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceReliefDepth¶
-
HolePackageBuilder.
ScrewClearanceReliefDepth
¶ Returns the relief depth - this is applicable for screw clearence hole type
-------------------------------------
Getter Method
Signature
ScrewClearanceReliefDepth
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceReliefEnabled¶
-
HolePackageBuilder.
ScrewClearanceReliefEnabled
¶ Returns or sets the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type
-------------------------------------
Getter Method
Signature
ScrewClearanceReliefEnabled
Returns: Return type: bool New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ScrewClearanceReliefEnabled
Parameters: screwClearanceReliefEnabled (bool) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ScrewClearanceStartChamferAngle¶
-
HolePackageBuilder.
ScrewClearanceStartChamferAngle
¶ Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type
-------------------------------------
Getter Method
Signature
ScrewClearanceStartChamferAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceStartChamferEnabled¶
-
HolePackageBuilder.
ScrewClearanceStartChamferEnabled
¶ Returns or sets the screw clearance start chamfer enabled - this is applicable for screw clearance hole type
-------------------------------------
Getter Method
Signature
ScrewClearanceStartChamferEnabled
Returns: Return type: bool New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ScrewClearanceStartChamferEnabled
Parameters: screwClearanceStartChamferEnabled (bool) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ScrewClearanceStartChamferOffset¶
-
HolePackageBuilder.
ScrewClearanceStartChamferOffset
¶ Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type
-------------------------------------
Getter Method
Signature
ScrewClearanceStartChamferOffset
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ScrewClearanceTipAngle¶
-
HolePackageBuilder.
ScrewClearanceTipAngle
¶ Returns the tip angle - this is applicable for screw clearance hole
-------------------------------------
Getter Method
Signature
ScrewClearanceTipAngle
Returns: Return type: NXOpen.Expression
New in version NX6.0.0.
License requirements: None.
ScrewFitOption¶
-
HolePackageBuilder.
ScrewFitOption
¶ Returns or sets the screw fit Option - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
ScrewFitOption
Returns: Return type: str New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ScrewFitOption
Parameters: screwFitOption (str) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ScrewSize¶
-
HolePackageBuilder.
ScrewSize
¶ Returns or sets the screw size - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
ScrewSize
Returns: Return type: str New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ScrewSize
Parameters: screwSize (str) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ScrewStandard¶
-
HolePackageBuilder.
ScrewStandard
¶ Returns or sets the screw standard - this is applicable for screw clearence hole type
-------------------------------------
Getter Method
Signature
ScrewStandard
Returns: Return type: str New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ScrewStandard
Parameters: screwStandard (str) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ScrewType¶
-
HolePackageBuilder.
ScrewType
¶ Returns or sets the screw type - this is applicable for screw clearence hole
-------------------------------------
Getter Method
Signature
ScrewType
Returns: Return type: str New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ScrewType
Parameters: screwType (str) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
StartExtensionEnabled¶
-
HolePackageBuilder.
StartExtensionEnabled
¶ Returns or sets the extend start enabled - this is applicable for start extension to all hole types
-------------------------------------
Getter Method
Signature
StartExtensionEnabled
Returns: Return type: bool New in version NX7.5.0.
License requirements: None.
-------------------------------------
Setter Method
Signature
StartExtensionEnabled
Parameters: startExtensionEnabled (bool) – New in version NX7.5.0.
License requirements: solid_modeling (“SOLIDS MODELING”)
StartHoleData¶
-
HolePackageBuilder.
StartHoleData
¶ Returns the start target body
-------------------------------------
Getter Method
Signature
StartHoleData
Returns: Return type: NXOpen.GeometricUtilities.StartHoleData
New in version NX5.0.2.
License requirements: None.
TapDrillDiameter¶
-
HolePackageBuilder.
TapDrillDiameter
¶ Returns the tap drill diameter - this is applicable for threaded hole
-------------------------------------
Getter Method
Signature
TapDrillDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadDepth¶
-
HolePackageBuilder.
ThreadDepth
¶ Returns the thread depth - this is applicable for threaded hole
-------------------------------------
Getter Method
Signature
ThreadDepth
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadLengthOption¶
-
HolePackageBuilder.
ThreadLengthOption
¶ Returns or sets the thread length option - this is applicable for threaded hole
-------------------------------------
Getter Method
Signature
ThreadLengthOption
Returns: Return type: NXOpen.Features.HolePackageBuilderThreadLengthOptions
New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ThreadLengthOption
Parameters: threadLengthOption ( NXOpen.Features.HolePackageBuilderThreadLengthOptions
) –New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ThreadRotation¶
-
HolePackageBuilder.
ThreadRotation
¶ Returns or sets the thread rotation - this is applicable for threaded hole
-------------------------------------
Getter Method
Signature
ThreadRotation
Returns: Return type: NXOpen.Features.HolePackageBuilderThreadRotationOptions
New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ThreadRotation
Parameters: threadRotation ( NXOpen.Features.HolePackageBuilderThreadRotationOptions
) –New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ThreadSize¶
-
HolePackageBuilder.
ThreadSize
¶ Returns or sets the thread size - this is applicable for threaded hole
-------------------------------------
Getter Method
Signature
ThreadSize
Returns: Return type: str New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ThreadSize
Parameters: threadSize (str) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ThreadStandard¶
-
HolePackageBuilder.
ThreadStandard
¶ Returns or sets the thread standard - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadStandard
Returns: Return type: str New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ThreadStandard
Parameters: threadStandard (str) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ThreadedEndChamferAngle¶
-
HolePackageBuilder.
ThreadedEndChamferAngle
¶ Returns the threaded end chamfer angle - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedEndChamferAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedEndChamferDiameter¶
-
HolePackageBuilder.
ThreadedEndChamferDiameter
¶ Returns the threaded end chamfer offset - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedEndChamferDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedEndChamferEnabled¶
-
HolePackageBuilder.
ThreadedEndChamferEnabled
¶ Returns or sets the threaded end chamfer enabled - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedEndChamferEnabled
Returns: Return type: bool New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ThreadedEndChamferEnabled
Parameters: threadedEndChamferEnabled (bool) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ThreadedHoleDepth¶
-
HolePackageBuilder.
ThreadedHoleDepth
¶ Returns the hole depth - this is applicable for threaded hole
-------------------------------------
Getter Method
Signature
ThreadedHoleDepth
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedReliefAngle¶
-
HolePackageBuilder.
ThreadedReliefAngle
¶ Returns the relief angle - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedReliefAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedReliefChamferAngle¶
-
HolePackageBuilder.
ThreadedReliefChamferAngle
¶ Returns the threaded relief chamfer angle - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedReliefChamferAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedReliefChamferOffset¶
-
HolePackageBuilder.
ThreadedReliefChamferOffset
¶ Returns the threaded relief chamfer offset - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedReliefChamferOffset
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedReliefDepth¶
-
HolePackageBuilder.
ThreadedReliefDepth
¶ Returns the threaded relief depth - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedReliefDepth
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedReliefDiameter¶
-
HolePackageBuilder.
ThreadedReliefDiameter
¶ Returns the relief diameter - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedReliefDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedReliefEnabled¶
-
HolePackageBuilder.
ThreadedReliefEnabled
¶ Returns or sets the threaded relief enabled - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedReliefEnabled
Returns: Return type: bool New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ThreadedReliefEnabled
Parameters: threadedReliefEnabled (bool) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ThreadedStartChamferAngle¶
-
HolePackageBuilder.
ThreadedStartChamferAngle
¶ Returns the threaded start chamfer angle - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedStartChamferAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedStartChamferDiameter¶
-
HolePackageBuilder.
ThreadedStartChamferDiameter
¶ Returns the threaded start chamfer offset - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedStartChamferDiameter
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
ThreadedStartChamferEnabled¶
-
HolePackageBuilder.
ThreadedStartChamferEnabled
¶ Returns or sets the threaded start chamfer enabled - this is applicable for threaded hole type
-------------------------------------
Getter Method
Signature
ThreadedStartChamferEnabled
Returns: Return type: bool New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
ThreadedStartChamferEnabled
Parameters: threadedStartChamferEnabled (bool) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
ThreadedTipAngle¶
-
HolePackageBuilder.
ThreadedTipAngle
¶ Returns the tip angle - this is applicable for threaded hole
-------------------------------------
Getter Method
Signature
ThreadedTipAngle
Returns: Return type: NXOpen.Expression
New in version NX5.0.2.
License requirements: None.
Tolerance¶
-
HolePackageBuilder.
Tolerance
¶ Returns or sets the distance tolerance
-------------------------------------
Getter Method
Signature
Tolerance
Returns: Return type: float New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
Tolerance
Parameters: tolerance (float) – New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
Type¶
-
HolePackageBuilder.
Type
¶ Returns or sets the type
-------------------------------------
Getter Method
Signature
Type
Returns: Return type: NXOpen.Features.HolePackageBuilderTypes
New in version NX5.0.2.
License requirements: None.
-------------------------------------
Setter Method
Signature
Type
Parameters: type ( NXOpen.Features.HolePackageBuilderTypes
) –New in version NX5.0.2.
License requirements: solid_modeling (“SOLIDS MODELING”)
UntilSelectedTarget¶
-
HolePackageBuilder.
UntilSelectedTarget
¶ Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type
-------------------------------------
Getter Method
Signature
UntilSelectedTarget
Returns: It can be face and datums. Return type: NXOpen.SelectDisplayableObject
New in version NX5.0.2.
License requirements: None.
Method Detail¶
Validate¶
-
HolePackageBuilder.
Validate
¶ Validate whether the inputs to the component are sufficient for commit to be called.
If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.
Signature
Validate()
Returns: Was self validation successful Return type: bool New in version NX3.0.1.
License requirements: None.