NcmWedmBuilder Class

class NXOpen.CAM.NcmWedmBuilder

Bases: NXOpen.CAM.NcmSubopBuilder

Represents a CAM.

NcmWedmBuilder .. versionadded:: NX7.5.0

Properties

Property	Description
CutcomOff	Returns or sets the cutcom_off
CutcomOn	Returns or sets the cutcom_on
CutcomReg	Returns or sets the cutcom_reg
CutcomRegBuilder	Returns the cutcom_reg builder
CutcomRegisterFlag	Returns or sets the cutcom output register flag
DefaultRegionStartType	Returns or sets the region start type
FromPointBuilder	Returns the from point builder
GlobalStopPointDistanceBuilder	Returns the global_stop_point_distance builder
GlobalStopPointMethod	Returns or sets the global_stop_point_method
GlobalStopPointType	Returns or sets the global_stop_point_type
GoHomePointBuilder	Returns the go home point builder
LeadInAngleBuilder	Returns the lead_in_angle builder
LeadInCutcomAngleBuilder	Returns the lead_in_cutcom_angle builder
LeadInCutcomDistanceBuilder	Returns the lead_in_cutcom_distance builder
LeadInDistanceBuilder	Returns the lead_in_distance builder
LeadInMethod	Returns or sets the lead_in_method
LeadOutAngleBuilder	Returns the lead_out_angle builder
LeadOutCutcomAngleBuilder	Returns the lead_out_cutcom_angle builder
LeadOutCutcomDistanceBuilder	Returns the lead_out_cutcom_distance builder
LeadOutDistanceBuilder	Returns the lead_out_distance builder
LeadOutMethod	Returns or sets the lead_out_method
LeadOutSameAsLeadIn	Returns or sets the lead out same as lead in
NonTiltLeadIn	Returns or sets the non_tilt_lead_in
StartPointsEffectDistBuilder	Returns the region start points effective distance builder (inheritable tool dep)
StartPointsUseEffectDist	Returns or sets the start points use effective distance
Tag	Returns the Tag for this object.

Methods

Method	Description
GetCustomizableItemBuilder	Returns the customizable item builder for given customizable item name
GetCustomizableItemNames	Returns the names for all customizable item ids
GetRegionStartPoints	Returns region start points
SetRegionStartPoints	Sets region start points
Validate	Validate whether the inputs to the component are sufficient for commit to be called.

Enumerations

NcmWedmBuilderCutcomOffTypes Enumeration	the types available for cutcom off
NcmWedmBuilderCutcomOnTypes Enumeration	the types available for cutcom on
NcmWedmBuilderGlobalStopPointMethodTypes Enumeration	the types available for stop points method
NcmWedmBuilderGlobalStopPointTypes Enumeration	the types available for wedm stop points
NcmWedmBuilderLeadInMethodTypes Enumeration	the types available for lead in method
NcmWedmBuilderLeadOutMethodTypes Enumeration	the types available for lead out method
NcmWedmBuilderLeadOutSameAsLeadInTypes Enumeration	the types available for lead out same as lead in
NcmWedmBuilderNonTiltLeadInTypes Enumeration	the types available for non-tilt lead in

Property Detail

CutcomOff

NcmWedmBuilder.CutcomOff

Returns or sets the cutcom_off

-------------------------------------

Getter Method

Signature CutcomOff

Returns:the cutcom_off Return type:NXOpen.CAM.NcmWedmBuilderCutcomOffTypes

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature CutcomOff

Parameters:cutcomOff (NXOpen.CAM.NcmWedmBuilderCutcomOffTypes) – the cutcom_off

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

CutcomOn

NcmWedmBuilder.CutcomOn

Returns or sets the cutcom_on

-------------------------------------

Getter Method

Signature CutcomOn

Returns:the cutcom_on Return type:NXOpen.CAM.NcmWedmBuilderCutcomOnTypes

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature CutcomOn

Parameters:cutcomOn (NXOpen.CAM.NcmWedmBuilderCutcomOnTypes) – the cutcom_on

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

CutcomReg

NcmWedmBuilder.CutcomReg

Returns or sets the cutcom_reg

-------------------------------------

Getter Method

Signature CutcomReg

Returns:the cutcom_reg Return type:int

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature CutcomReg

Parameters:cutcomReg (int) – the cutcom_reg

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

CutcomRegBuilder

NcmWedmBuilder.CutcomRegBuilder

Returns the cutcom_reg builder

-------------------------------------

Getter Method

Signature CutcomRegBuilder

Returns:the cutcom_reg Builder Return type:NXOpen.CAM.InheritableIntBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

CutcomRegisterFlag

NcmWedmBuilder.CutcomRegisterFlag

Returns or sets the cutcom output register flag

-------------------------------------

Getter Method

Signature CutcomRegisterFlag

Returns:the cutcom output register flag Return type:bool

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature CutcomRegisterFlag

Parameters:cutcomRegFlag (bool) – the cutcom output register flag

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

FromPointBuilder

NcmWedmBuilder.FromPointBuilder

Returns the from point builder

-------------------------------------

Getter Method

Signature FromPointBuilder

Returns:the from point builder Return type:NXOpen.CAM.WedmPointDefinitionBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

GlobalStopPointDistanceBuilder

NcmWedmBuilder.GlobalStopPointDistanceBuilder

Returns the global_stop_point_distance builder

-------------------------------------

Getter Method

Signature GlobalStopPointDistanceBuilder

Returns:the global_stop_point_distance Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

GlobalStopPointMethod

NcmWedmBuilder.GlobalStopPointMethod

Returns or sets the global_stop_point_method

-------------------------------------

Getter Method

Signature GlobalStopPointMethod

Returns:the global_stop_point_method Return type:NXOpen.CAM.NcmWedmBuilderGlobalStopPointMethodTypes

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature GlobalStopPointMethod

Parameters:globalStopPointMethod (NXOpen.CAM.NcmWedmBuilderGlobalStopPointMethodTypes) – the global_stop_point_method

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

GlobalStopPointType

NcmWedmBuilder.GlobalStopPointType

Returns or sets the global_stop_point_type

-------------------------------------

Getter Method

Signature GlobalStopPointType

Returns:the global_stop_point_type Return type:NXOpen.CAM.NcmWedmBuilderGlobalStopPointTypes

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature GlobalStopPointType

Parameters:globalStopPointType (NXOpen.CAM.NcmWedmBuilderGlobalStopPointTypes) – the global_stop_point_type

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

GoHomePointBuilder

NcmWedmBuilder.GoHomePointBuilder

Returns the go home point builder

-------------------------------------

Getter Method

Signature GoHomePointBuilder

Returns:the go home point builder Return type:NXOpen.CAM.WedmPointDefinitionBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadInAngleBuilder

NcmWedmBuilder.LeadInAngleBuilder

Returns the lead_in_angle builder

-------------------------------------

Getter Method

Signature LeadInAngleBuilder

Returns:the lead_in_angle Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadInCutcomAngleBuilder

NcmWedmBuilder.LeadInCutcomAngleBuilder

Returns the lead_in_cutcom_angle builder

-------------------------------------

Getter Method

Signature LeadInCutcomAngleBuilder

Returns:the lead_in_cutcom_angle Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadInCutcomDistanceBuilder

NcmWedmBuilder.LeadInCutcomDistanceBuilder

Returns the lead_in_cutcom_distance builder

-------------------------------------

Getter Method

Signature LeadInCutcomDistanceBuilder

Returns:the lead_in_cutcom_distance Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadInDistanceBuilder

NcmWedmBuilder.LeadInDistanceBuilder

Returns the lead_in_distance builder

-------------------------------------

Getter Method

Signature LeadInDistanceBuilder

Returns:the lead_in_distance Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadInMethod

NcmWedmBuilder.LeadInMethod

Returns or sets the lead_in_method

-------------------------------------

Getter Method

Signature LeadInMethod

Returns:the lead_in_method Return type:NXOpen.CAM.NcmWedmBuilderLeadInMethodTypes

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature LeadInMethod

Parameters:leadInMethod (NXOpen.CAM.NcmWedmBuilderLeadInMethodTypes) – the lead_in_method

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadOutAngleBuilder

NcmWedmBuilder.LeadOutAngleBuilder

Returns the lead_out_angle builder

-------------------------------------

Getter Method

Signature LeadOutAngleBuilder

Returns:the lead_out_angle Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadOutCutcomAngleBuilder

NcmWedmBuilder.LeadOutCutcomAngleBuilder

Returns the lead_out_cutcom_angle builder

-------------------------------------

Getter Method

Signature LeadOutCutcomAngleBuilder

Returns:the lead_out_cutcom_angle Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadOutCutcomDistanceBuilder

NcmWedmBuilder.LeadOutCutcomDistanceBuilder

Returns the lead_out_cutcom_distance builder

-------------------------------------

Getter Method

Signature LeadOutCutcomDistanceBuilder

Returns:the lead_out_cutcom_distance Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadOutDistanceBuilder

NcmWedmBuilder.LeadOutDistanceBuilder

Returns the lead_out_distance builder

-------------------------------------

Getter Method

Signature LeadOutDistanceBuilder

Returns:the lead_out_distance Builder Return type:NXOpen.CAM.InheritableDoubleBuilder

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadOutMethod

NcmWedmBuilder.LeadOutMethod

Returns or sets the lead_out_method

-------------------------------------

Getter Method

Signature LeadOutMethod

Returns:the lead_out_method Return type:NXOpen.CAM.NcmWedmBuilderLeadOutMethodTypes

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature LeadOutMethod

Parameters:leadOutMethod (NXOpen.CAM.NcmWedmBuilderLeadOutMethodTypes) – the lead_out_method

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

LeadOutSameAsLeadIn

NcmWedmBuilder.LeadOutSameAsLeadIn

Returns or sets the lead out same as lead in

-------------------------------------

Getter Method

Signature LeadOutSameAsLeadIn

Returns:the the lead out same as lead in Flag Return type:NXOpen.CAM.NcmWedmBuilderLeadOutSameAsLeadInTypes

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature LeadOutSameAsLeadIn

Parameters:sameAsLeadIn (NXOpen.CAM.NcmWedmBuilderLeadOutSameAsLeadInTypes) – the the lead out same as lead in Flag

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

NonTiltLeadIn

NcmWedmBuilder.NonTiltLeadIn

Returns or sets the non_tilt_lead_in

-------------------------------------

Getter Method

Signature NonTiltLeadIn

Returns:the non_tilt_lead_in Return type:NXOpen.CAM.NcmWedmBuilderNonTiltLeadInTypes

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

-------------------------------------

Setter Method

Signature NonTiltLeadIn

Parameters:nonTiltLeadIn (NXOpen.CAM.NcmWedmBuilderNonTiltLeadInTypes) – the non_tilt_lead_in

New in version NX7.5.0.

License requirements: cam_base (“CAM BASE”)

Method Detail

Validate

NcmWedmBuilder.Validate

Validate whether the inputs to the component are sufficient for commit to be called.

If the component is not in a state to commit then an exception is thrown. For example, if the component requires you to set some property, this method will throw an exception if you haven’t set it. This method throws a not-yet-implemented NXException for some components.

Signature Validate()

Returns:Was self validation successful Return type:bool

New in version NX3.0.1.

License requirements: None.