Modifier and Type | Method and Description |
---|---|
void |
createAuxfun(UFVariant pathId,
int auxfunCode,
String text)
Refer to UF_PATH_create_auxfun for documentation.
|
void |
createCircularMotion(UFVariant pathId,
UFPath.CircularMotion circularMotionData)
Refer to UF_PATH_create_circular_motion for documentation.
|
void |
createClamp(UFVariant pathId,
UFPath.ClampStatus clampStatus,
UFPath.Axis axisType,
String text)
Refer to UF_PATH_create_clamp for documentation.
|
void |
createCoolantOff(UFVariant pahtId,
String text)
Refer to UF_PATH_create_coolant_off for documentation.
|
void |
createCoolantOn(UFVariant pathId,
UFPath.CoolantType coolantType,
String text)
Refer to UF_PATH_create_coolant_on for documentation.
|
void |
createCutcom(UFVariant pathId,
UFPath.Cutcom cutcomData,
String text)
Refer to UF_PATH_create_cutcom for documentation.
|
void |
createCutWire(UFVariant pathId,
String text)
Refer to UF_PATH_create_cut_wire for documentation.
|
void |
createDwell(UFVariant pathId,
double dwellValue,
UFPath.DwellUnit dwellUnit,
String text)
Refer to UF_PATH_create_dwell for documentation.
|
void |
createFedrat(UFVariant pathId,
double fedratValue,
String text)
Refer to UF_PATH_create_fedrat for documentation.
|
void |
createFlush(UFVariant pathId,
UFPath.Flush flushData,
String text)
Refer to UF_PATH_create_flush for documentation.
|
void |
createFlushTank(UFVariant pathId,
UFPath.TankType tankType,
String text)
Refer to UF_PATH_create_flush_tank for documentation.
|
void |
createHelicalMotion(UFVariant pathId,
UFPath.HelicalMotion helicalMotionData)
Refer to UF_PATH_create_helical_motion for documentation.
|
void |
createLevelMarker(UFVariant pathId,
UFPath.LevelMarker levelMarkerData)
Refer to UF_PATH_create_level_marker for documentation.
|
void |
createLinearMotion(UFVariant pathId,
UFPath.LinearMotion linearMotionData)
Refer to UF_PATH_create_linear_motion for documentation.
|
void |
createOpmessage(UFVariant pathId,
String text)
Refer to UF_PATH_create_opmessage for documentation.
|
void |
createOpSkip(UFVariant pathId,
UFPath.OpSkip skipOption,
String text)
Refer to UF_PATH_create_op_skip for documentation.
|
void |
createOpStop(UFVariant pathId,
String text)
Refer to UF_PATH_create_op_stop for documentation.
|
void |
createOrigin(UFVariant pathId,
double[] originCoordinates,
String text)
Refer to UF_PATH_create_origin for documentation.
|
void |
createPower(UFVariant pathId,
double powerValue,
String text)
Refer to UF_PATH_create_power for documentation.
|
void |
createPprint(UFVariant pathId,
String text)
Refer to UF_PATH_create_pprint for documentation.
|
void |
createPrefun(UFVariant pathId,
int prefunCode,
String text)
Refer to UF_PATH_create_prefun for documentation.
|
void |
createRotate(UFVariant pathId,
UFPath.Rotate rotateData,
String text)
Refer to UF_PATH_create_rotate for documentation.
|
void |
createSelectHead(UFVariant pathId,
UFPath.HeadType headType,
String text)
Refer to UF_PATH_create_select_head for documentation.
|
void |
createSeqno(UFVariant pathId,
UFPath.Seqno seqType,
int seqNumber,
int seqIncr,
int seqFreq,
String text)
Refer to UF_PATH_create_seqno for documentation.
|
void |
createSetMode(UFVariant pathId,
UFPath.OutputMode ouputMode,
UFPath.FeedrateMode feedrateMode,
UFPath.ArcMode arcMode,
UFPath.ParallelMode parallelMode,
UFPath.MachineMode machineMode,
String text)
Refer to UF_PATH_create_set_mode for documentation.
|
void |
createSpindleOff(UFVariant pathId,
String text)
Refer to UF_PATH_create_spindle_off for documentation.
|
void |
createSpindleOn(UFVariant pathId,
UFPath.SpindleOn spindleOnData,
String text)
Refer to UF_PATH_create_spindle_on for documentation.
|
void |
createSpindleReverse(UFVariant pathId,
String text)
Refer to UF_PATH_create_spindle_reverse for documentation.
|
void |
createStop(UFVariant pathId,
String text)
Refer to UF_PATH_create_stop for documentation.
|
void |
createText(UFVariant pathId,
String text)
Refer to UF_PATH_create_text for documentation.
|
void |
createThreadWire(UFVariant pathId,
String text)
Refer to UF_PATH_create_thread_wire for documentation.
|
void |
createToolChange(UFVariant pathId,
UFPath.ToolChange toolChangeData,
String text)
Refer to UF_PATH_create_tool_change for documentation.
|
void |
createToolLengthComp(UFVariant pathId,
int toolCompRegister,
String text)
Refer to UF_PATH_create_tool_length_comp for documentation.
|
void |
createToolPreselect(UFVariant pathId,
int toolNumber,
String text)
Refer to UF_PATH_create_tool_preselect for documentation.
|
void |
createTrackingPointChange(UFVariant pathId,
UFPath.TrackingPointChange toolChangeData)
Refer to UF_PATH_create_tracking_point_change for documentation.
|
void |
createWireAngle(UFVariant pathId,
double slopeValue,
double angleValue,
boolean angleFlag,
String text)
Refer to UF_PATH_create_wire_angle for documentation.
|
void |
createWireCutcom(UFVariant pathId,
UFPath.CutcomMode cutcomMode,
int adjustRegister,
boolean cutcomOffFlag,
boolean adjustFlag,
String text)
Refer to UF_PATH_create_wire_cutcom for documentation.
|
void |
createWireGuides(UFVariant pathId,
String text)
Refer to UF_PATH_create_wire_guides for documentation.
|
void |
endToolPath(UFVariant pathId)
Refer to UF_PATH_end_tool_path for documentation.
|
void |
initToolPath(UFVariant pathId)
Refer to UF_PATH_init_tool_path for documentation.
|
void initToolPath(UFVariant pathId) throws NXException, RemoteException
NXException
RemoteException
void endToolPath(UFVariant pathId) throws NXException, RemoteException
NXException
RemoteException
void createLinearMotion(UFVariant pathId, UFPath.LinearMotion linearMotionData) throws NXException, RemoteException
NXException
RemoteException
void createCircularMotion(UFVariant pathId, UFPath.CircularMotion circularMotionData) throws NXException, RemoteException
NXException
RemoteException
void createHelicalMotion(UFVariant pathId, UFPath.HelicalMotion helicalMotionData) throws NXException, RemoteException
NXException
RemoteException
void createText(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createPprint(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createOpmessage(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createOrigin(UFVariant pathId, double[] originCoordinates, String text) throws NXException, RemoteException
NXException
RemoteException
void createSeqno(UFVariant pathId, UFPath.Seqno seqType, int seqNumber, int seqIncr, int seqFreq, String text) throws NXException, RemoteException
NXException
RemoteException
void createSetMode(UFVariant pathId, UFPath.OutputMode ouputMode, UFPath.FeedrateMode feedrateMode, UFPath.ArcMode arcMode, UFPath.ParallelMode parallelMode, UFPath.MachineMode machineMode, String text) throws NXException, RemoteException
NXException
RemoteException
void createSelectHead(UFVariant pathId, UFPath.HeadType headType, String text) throws NXException, RemoteException
NXException
RemoteException
void createToolChange(UFVariant pathId, UFPath.ToolChange toolChangeData, String text) throws NXException, RemoteException
NXException
RemoteException
void createTrackingPointChange(UFVariant pathId, UFPath.TrackingPointChange toolChangeData) throws NXException, RemoteException
NXException
RemoteException
void createSpindleOn(UFVariant pathId, UFPath.SpindleOn spindleOnData, String text) throws NXException, RemoteException
NXException
RemoteException
void createSpindleOff(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createSpindleReverse(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createCoolantOn(UFVariant pathId, UFPath.CoolantType coolantType, String text) throws NXException, RemoteException
NXException
RemoteException
void createCoolantOff(UFVariant pahtId, String text) throws NXException, RemoteException
NXException
RemoteException
void createOpStop(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createOpSkip(UFVariant pathId, UFPath.OpSkip skipOption, String text) throws NXException, RemoteException
NXException
RemoteException
void createStop(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createDwell(UFVariant pathId, double dwellValue, UFPath.DwellUnit dwellUnit, String text) throws NXException, RemoteException
NXException
RemoteException
void createAuxfun(UFVariant pathId, int auxfunCode, String text) throws NXException, RemoteException
NXException
RemoteException
void createPrefun(UFVariant pathId, int prefunCode, String text) throws NXException, RemoteException
NXException
RemoteException
void createClamp(UFVariant pathId, UFPath.ClampStatus clampStatus, UFPath.Axis axisType, String text) throws NXException, RemoteException
NXException
RemoteException
void createToolLengthComp(UFVariant pathId, int toolCompRegister, String text) throws NXException, RemoteException
NXException
RemoteException
void createToolPreselect(UFVariant pathId, int toolNumber, String text) throws NXException, RemoteException
NXException
RemoteException
void createRotate(UFVariant pathId, UFPath.Rotate rotateData, String text) throws NXException, RemoteException
NXException
RemoteException
void createThreadWire(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createCutWire(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createFlush(UFVariant pathId, UFPath.Flush flushData, String text) throws NXException, RemoteException
NXException
RemoteException
void createFlushTank(UFVariant pathId, UFPath.TankType tankType, String text) throws NXException, RemoteException
NXException
RemoteException
void createPower(UFVariant pathId, double powerValue, String text) throws NXException, RemoteException
NXException
RemoteException
void createWireGuides(UFVariant pathId, String text) throws NXException, RemoteException
NXException
RemoteException
void createFedrat(UFVariant pathId, double fedratValue, String text) throws NXException, RemoteException
NXException
RemoteException
void createWireAngle(UFVariant pathId, double slopeValue, double angleValue, boolean angleFlag, String text) throws NXException, RemoteException
NXException
RemoteException
void createWireCutcom(UFVariant pathId, UFPath.CutcomMode cutcomMode, int adjustRegister, boolean cutcomOffFlag, boolean adjustFlag, String text) throws NXException, RemoteException
NXException
RemoteException
void createCutcom(UFVariant pathId, UFPath.Cutcom cutcomData, String text) throws NXException, RemoteException
NXException
RemoteException
void createLevelMarker(UFVariant pathId, UFPath.LevelMarker levelMarkerData) throws NXException, RemoteException
NXException
RemoteException
Copyright 2016 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.