public interface DieEngTrimTaskBuilder
AutoDieCollection.createDieEngTrimTaskBuilder(nxopen.features.BodyFeature)
Modifier and Type | Interface and Description |
---|---|
static class |
DieEngTrimTaskBuilder.TrimTaskCamType
the trim task cam type.
|
static class |
DieEngTrimTaskBuilder.TrimTaskMatchCutType
the trim task match cut type.
|
Modifier and Type | Method and Description |
---|---|
DieEngTrimTaskBuilder.TrimTaskCamType |
camType()
Returns the cam type.
|
boolean |
createScrap()
Returns the create scrap.
|
boolean |
endPlaneSelected()
Returns the end plane selected.
|
boolean |
finishOperation()
Returns the finish operation.
|
boolean |
layoutFlange()
Returns the layout flange.
|
DieEngTrimTaskBuilder.TrimTaskMatchCutType |
matchCut()
Returns the match cut.
|
nxopen.Direction |
selectCamDirection()
Returns the selected cam direction.
|
nxopen.features.SelectFeature |
selectDieTip()
Returns the selected die tip.
|
Plane |
selectEndPlane()
Returns the selected end plane.
|
SelectPlaneList |
selectScrapCutters()
Returns the selected scrap cutters.
|
Plane |
selectStartPlane()
Returns the selected start plane.
|
ScCollector |
selectTrimBounds()
Returns the selected trim bounds.
|
void |
setCamType(DieEngTrimTaskBuilder.TrimTaskCamType camType)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setCreateScrap(boolean createScrap)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setEndPlaneSelected(boolean endPlaneSelected)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setFinishOperation(boolean finishOperation)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setLayoutFlange(boolean layoutFlange)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setMatchCut(DieEngTrimTaskBuilder.TrimTaskMatchCutType matchCut)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setMatchCutAngle(double angle)
Sets the match cut dimension angle value.
|
void |
setMatchCutFirstRadius(double firstRadius)
Sets the match cut dimension first radius value.
|
void |
setMatchCutNotchOffset(double notchOffset)
Sets the match cut dimension notch offset value.
|
void |
setMatchCutOffsetFromPlane(double offsetFromPlane)
Sets the match cut dimension offset from plane value.
|
void |
setMatchCutOffsetLength(double offsetLength)
Sets the match cut dimension offset length value.
|
void |
setMatchCutScrapCutterLength(double scrapCutterLength)
Sets the match cut dimension scrap cutter length value.
|
void |
setMatchCutSecondRadius(double secondRadius)
Sets the match cut dimension second radius value.
|
void |
setMatchCutThirdRadius(double thirdRadius)
Sets the match cut dimension third radius value.
|
void |
setSelectCamDirection(nxopen.Direction selectCamDirection)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setSelectEndPlane(Plane selectEndPlane)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setSelectStartPlane(Plane selectStartPlane)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setStartPlaneSelected(boolean startPlaneSelected)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setTrimDirection(boolean trimDirection)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setTrimNewDieFace(boolean trimNewDieFace)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setTrimTolerance(double trimTolerance)
License requirements: die_engineering ("DIE ENGINEERING") . |
void |
setUsePlaneOffset(boolean useOffset)
Sets the match cut dimension use plane offset value.
|
boolean |
startPlaneSelected()
Returns the start plane selected.
|
void |
switchTrimSide()
Switch trim side.
|
boolean |
trimDirection()
Returns the trim direction.
|
boolean |
trimNewDieFace()
Returns the trim new die face, from NX10.0 new stamping output can import one new die face to die engineer process.
|
double |
trimTolerance()
Returns the trim task tolerance.
|
nxopen.features.SelectFeature selectDieTip() throws NXException, RemoteException
NXException
RemoteException
ScCollector selectTrimBounds() throws NXException, RemoteException
NXException
RemoteException
boolean trimDirection() throws NXException, RemoteException
NXException
RemoteException
void setTrimDirection(boolean trimDirection) throws NXException, RemoteException
trimDirection
- NXException
RemoteException
Plane selectStartPlane() throws NXException, RemoteException
NXException
RemoteException
void setSelectStartPlane(Plane selectStartPlane) throws NXException, RemoteException
selectStartPlane
- NXException
RemoteException
Plane selectEndPlane() throws NXException, RemoteException
NXException
RemoteException
void setSelectEndPlane(Plane selectEndPlane) throws NXException, RemoteException
selectEndPlane
- NXException
RemoteException
nxopen.Direction selectCamDirection() throws NXException, RemoteException
NXException
RemoteException
void setSelectCamDirection(nxopen.Direction selectCamDirection) throws NXException, RemoteException
selectCamDirection
- NXException
RemoteException
DieEngTrimTaskBuilder.TrimTaskCamType camType() throws NXException, RemoteException
NXException
RemoteException
void setCamType(DieEngTrimTaskBuilder.TrimTaskCamType camType) throws NXException, RemoteException
camType
- NXException
RemoteException
SelectPlaneList selectScrapCutters() throws NXException, RemoteException
NXException
RemoteException
void switchTrimSide() throws NXException, RemoteException
NXException
RemoteException
boolean finishOperation() throws NXException, RemoteException
NXException
RemoteException
void setFinishOperation(boolean finishOperation) throws NXException, RemoteException
finishOperation
- if set to true, trim task will be finish operation, or else it is not finish operation.NXException
RemoteException
boolean layoutFlange() throws NXException, RemoteException
NXException
RemoteException
void setLayoutFlange(boolean layoutFlange) throws NXException, RemoteException
layoutFlange
- if set to true, trim task will layout flange, or else not layout flange.NXException
RemoteException
boolean createScrap() throws NXException, RemoteException
NXException
RemoteException
void setCreateScrap(boolean createScrap) throws NXException, RemoteException
createScrap
- if set to true, trim task will create scrap, or else not create scrap.NXException
RemoteException
double trimTolerance() throws NXException, RemoteException
NXException
RemoteException
void setTrimTolerance(double trimTolerance) throws NXException, RemoteException
trimTolerance
- NXException
RemoteException
DieEngTrimTaskBuilder.TrimTaskMatchCutType matchCut() throws NXException, RemoteException
NXException
RemoteException
void setMatchCut(DieEngTrimTaskBuilder.TrimTaskMatchCutType matchCut) throws NXException, RemoteException
matchCut
- NXException
RemoteException
void setMatchCutNotchOffset(double notchOffset) throws NXException, RemoteException
notchOffset
- NXException
RemoteException
void setMatchCutFirstRadius(double firstRadius) throws NXException, RemoteException
firstRadius
- NXException
RemoteException
void setMatchCutSecondRadius(double secondRadius) throws NXException, RemoteException
secondRadius
- NXException
RemoteException
void setMatchCutThirdRadius(double thirdRadius) throws NXException, RemoteException
thirdRadius
- NXException
RemoteException
void setMatchCutOffsetLength(double offsetLength) throws NXException, RemoteException
offsetLength
- NXException
RemoteException
void setMatchCutAngle(double angle) throws NXException, RemoteException
angle
- NXException
RemoteException
void setMatchCutScrapCutterLength(double scrapCutterLength) throws NXException, RemoteException
scrapCutterLength
- NXException
RemoteException
void setMatchCutOffsetFromPlane(double offsetFromPlane) throws NXException, RemoteException
offsetFromPlane
- NXException
RemoteException
void setUsePlaneOffset(boolean useOffset) throws NXException, RemoteException
useOffset
- NXException
RemoteException
boolean startPlaneSelected() throws NXException, RemoteException
NXException
RemoteException
void setStartPlaneSelected(boolean startPlaneSelected) throws NXException, RemoteException
startPlaneSelected
- if set to true, hints that start plane is selected, or else not selected.NXException
RemoteException
boolean endPlaneSelected() throws NXException, RemoteException
NXException
RemoteException
void setEndPlaneSelected(boolean endPlaneSelected) throws NXException, RemoteException
endPlaneSelected
- if set to true, hints that end plane is selected, or else not selected.NXException
RemoteException
boolean trimNewDieFace() throws NXException, RemoteException
NXException
RemoteException
void setTrimNewDieFace(boolean trimNewDieFace) throws NXException, RemoteException
trimNewDieFace
- if set to true, pierce task performs on new die face, or else it will perform on original die face.NXException
RemoteException
Copyright 2011 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.