Represents a TurnFeatureGeom Builder More...

Inheritance diagram for NXOpen.CAM.TurnFeatureGeomBuilder:

Public Types
enum	CutRegionSelectionModes { Automatic, Manual }
	the cut region selection options More...

enum	SurfaceSensitivityModes { None, Distance }
	the surface sensitivity options More...

enum	ToleranceOffsetModes { AfterContainment, BeforeContainment }
	the tolerance_offset options More...

Properties
unsafe NXOpen.CAM.TrimPlane	AxialTrimPlane1Builder `[get]`
	Returns the axial trim plane 1 More...

unsafe NXOpen.CAM.TrimPlane	AxialTrimPlane2Builder `[get]`
	Returns the axial trim plane 2 More...

unsafe NXOpen.CAM.TurnFeatureGeomBuilder.CutRegionSelectionModes	CutRegionSelectionMode `[get, set]`
	Returns or sets the cut region selection mode More...

unsafe NXOpen.Point	CutRegionSelectionPoint `[get, set]`
	Returns or sets the cut region selection point More...

unsafe NXOpen.CAM.TrimPlane	RadialTrimPlane1Builder `[get]`
	Returns the radial trim plane 1 More...

unsafe NXOpen.CAM.TrimPlane	RadialTrimPlane2Builder `[get]`
	Returns the radial trim plane 2 More...

unsafe NXOpen.CAM.TurnFeatureGeomBuilder.SurfaceSensitivityModes	SurfaceSensitivityMode `[get, set]`
	Returns or sets the surface sensitivity mode More...

unsafe double	SurfaceSensitivityTolerance `[get, set]`
	Returns or sets the surface sensitivity tolerance More...

unsafe NXOpen.CAM.TurnFeatureGeomBuilder.ToleranceOffsetModes	ToleranceOffsetMode `[get, set]`
	Returns or sets the tolerance_offset mode More...

unsafe NXOpen.CAM.TrimPoint	TrimPoint1Builder `[get]`
	Returns the trim point 1 options More...

unsafe NXOpen.CAM.TrimPoint	TrimPoint2Builder `[get]`
	Returns the trim point 2 mode options More...

Properties inherited from NXOpen.CAM.FeatureGeomBuilder
unsafe NXOpen.CAM.InheritableDoubleBuilder	BlankOffsetBuilder `[get]`
	Returns the blank offset (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	CheckOffsetBuilder `[get]`
	Returns the check offset (inheritable double) More...

unsafe NXOpen.CAM.GeometryCiBuilder	GeometryCiBuilder `[get]`
	Returns the geometry builder More...

unsafe NXOpen.CAM.LayoutCiBuilder	LayoutCiBuilder `[get]`
	Returns the save/layer layout builder More...

unsafe string	MachineComponent `[get, set]`
	Returns or sets the machine component More...

unsafe NXOpen.NXObject	PartMaterialBuilder `[get, set]`
	Returns or sets the part material More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	PartOffsetBuilder `[get]`
	Returns the part offset (inheritable double) More...

unsafe bool	PhysicalWorkpieceState `[get, set]`
	Returns or sets the physical workpiece state More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	TrimOffsetBuilder `[get]`
	Returns the trim offset (inheritable double) More...

Properties inherited from NXOpen.CAM.NCGroupBuilder
unsafe string	Description `[get, set]`
	Returns or sets the description More...

unsafe NXOpen.CAM.UdeSet	EndUdeSet `[get]`
	Returns the end ude set More...

unsafe NXOpen.CAM.UdeSet	StartUdeSet `[get]`
	Returns the start ude set More...

Properties inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.CAM.Ude	CycleEvent `[get]`
	Returns the cycle event More...

unsafe NXOpen.CAM.Cycle	CycleTable `[get]`
	Returns the cycle More...

unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes	OptimizationMethod `[get, set]`
	Returns or sets the optim method More...

unsafe NXOpen.CAM.NCGroup	TargetPocket `[get, set]`
	Returns or sets the target pocket More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.CAM.FeatureGeomBuilder
unsafe string	GetMaterial ()
	Get part material More...

unsafe void	GetMaterialData (out string libRef, out string name, out string description, out string code, out string hardness)
	Get material data More...

unsafe void	SetMaterial (string libRef)
	Set part material More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a TurnFeatureGeom Builder

To create a new instance of this class, use NXOpen.CAM.NCGroupCollection.CreateTurnFeatureGeomBuilder

Created in NX5.0.0

Member Enumeration Documentation

enum NXOpen.CAM.TurnFeatureGeomBuilder.CutRegionSelectionModes

the cut region selection options

Enumerator
Automatic	Automatic cut region selection.
Manual	Manual cut region selection.

enum NXOpen.CAM.TurnFeatureGeomBuilder.SurfaceSensitivityModes

the surface sensitivity options

Enumerator
None	Surface sensitivity is inactive.
Distance	Surface sensitivity is active.

enum NXOpen.CAM.TurnFeatureGeomBuilder.ToleranceOffsetModes

the tolerance_offset options

Enumerator
AfterContainment	Tolerance offset after containment.
BeforeContainment	Tolerance offset before containment.

Property Documentation

unsafe NXOpen.CAM.TrimPlane NXOpen.CAM.TurnFeatureGeomBuilder.AxialTrimPlane1Builder

get

Returns the axial trim plane 1

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TrimPlane NXOpen.CAM.TurnFeatureGeomBuilder.AxialTrimPlane2Builder

get

Returns the axial trim plane 2

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnFeatureGeomBuilder.CutRegionSelectionModes NXOpen.CAM.TurnFeatureGeomBuilder.CutRegionSelectionMode

getset

Returns or sets the cut region selection mode

Created in NX6.0.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.Point NXOpen.CAM.TurnFeatureGeomBuilder.CutRegionSelectionPoint

getset

Returns or sets the cut region selection point

Created in NX6.0.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TrimPlane NXOpen.CAM.TurnFeatureGeomBuilder.RadialTrimPlane1Builder

get

Returns the radial trim plane 1

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TrimPlane NXOpen.CAM.TurnFeatureGeomBuilder.RadialTrimPlane2Builder

get

Returns the radial trim plane 2

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnFeatureGeomBuilder.SurfaceSensitivityModes NXOpen.CAM.TurnFeatureGeomBuilder.SurfaceSensitivityMode

getset

Returns or sets the surface sensitivity mode

Created in NX6.0.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnFeatureGeomBuilder.SurfaceSensitivityTolerance

getset

Returns or sets the surface sensitivity tolerance

Created in NX6.0.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnFeatureGeomBuilder.ToleranceOffsetModes NXOpen.CAM.TurnFeatureGeomBuilder.ToleranceOffsetMode

getset

Returns or sets the tolerance_offset mode

Created in NX6.0.0

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TrimPoint NXOpen.CAM.TurnFeatureGeomBuilder.TrimPoint1Builder

get

Returns the trim point 1 options

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TrimPoint NXOpen.CAM.TurnFeatureGeomBuilder.TrimPoint2Builder

get

Returns the trim point 2 mode options

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_TurnFeatureGeomBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation