NXOpen.CAM.FeatureGeomBuilder Class Reference

Represents a FeatureGeom Builder More...

Inheritance diagram for NXOpen.CAM.FeatureGeomBuilder:

Public Member Functions
unsafe string	GetMaterial ()
	Get part material More...
unsafe void	GetMaterialData (out string libRef, out string name, out string description, out string code, out string hardness)
	Get material data More...
unsafe void	SetMaterial (string libRef)
	Set part material More...

Properties
unsafe NXOpen.CAM.InheritableDoubleBuilder	BlankOffsetBuilder [get]
	Returns the blank offset (inheritable double) More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	CheckOffsetBuilder [get]
	Returns the check offset (inheritable double) More...
unsafe NXOpen.CAM.GeometryCiBuilder	GeometryCiBuilder [get]
	Returns the geometry builder More...
unsafe NXOpen.CAM.LayoutCiBuilder	LayoutCiBuilder [get]
	Returns the save/layer layout builder More...
unsafe string	MachineComponent [get, set]
	Returns or sets the machine component More...
unsafe NXOpen.NXObject	PartMaterialBuilder [get, set]
	Returns or sets the part material More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	PartOffsetBuilder [get]
	Returns the part offset (inheritable double) More...
unsafe bool	PhysicalWorkpieceState [get, set]
	Returns or sets the physical workpiece state More...
unsafe NXOpen.CAM.InheritableDoubleBuilder	TrimOffsetBuilder [get]
	Returns the trim offset (inheritable double) More...
Properties inherited from NXOpen.CAM.NCGroupBuilder
unsafe string	Description [get, set]
	Returns or sets the description More...
unsafe NXOpen.CAM.UdeSet	EndUdeSet [get]
	Returns the end ude set More...
unsafe NXOpen.CAM.UdeSet	StartUdeSet [get]
	Returns the start ude set More...
Properties inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.CAM.Ude	CycleEvent [get]
	Returns the cycle event More...
unsafe NXOpen.CAM.Cycle	CycleTable [get]
	Returns the cycle More...
unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes	OptimizationMethod [get, set]
	Returns or sets the optim method More...
unsafe NXOpen.CAM.NCGroup	TargetPocket [get, set]
	Returns or sets the target pocket More...
Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder [get]
	Returns the preview builder subobject. More...
Properties inherited from NXOpen.TaggedObject
Tag	Tag [get]
	Returns the tag of this object. More...
Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink [get]
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Types inherited from NXOpen.CAM.ParamBuilder
enum	OptimizationTypes { None, MinimizeTravel, Band }
	Available types for Optimization Method in operation More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a FeatureGeom Builder

This is an abstract class, and cannot be instantiated.

Created in NX5.0.0

Member Function Documentation

unsafe string NXOpen.CAM.FeatureGeomBuilder.GetMaterial ( )

inline

Get part material

Created in NX8.0.1

License requirements: None.

Returns

unsafe void NXOpen.CAM.FeatureGeomBuilder.GetMaterialData ( out string  libRef, out string  name, out string  description, out string  code, out string  hardness  )

inline

Get material data

Created in NX8.0.2

License requirements: None.

Parameters

libRef
name
description
code
hardness

unsafe void NXOpen.CAM.FeatureGeomBuilder.SetMaterial ( string  libRef )

inline

Set part material

Created in NX8.0.1

License requirements: cam_base ("CAM BASE")

Parameters

libRef

Property Documentation

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeatureGeomBuilder.BlankOffsetBuilder

get

Returns the blank offset (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeatureGeomBuilder.CheckOffsetBuilder

get

Returns the check offset (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.GeometryCiBuilder NXOpen.CAM.FeatureGeomBuilder.GeometryCiBuilder

get

Returns the geometry builder

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.LayoutCiBuilder NXOpen.CAM.FeatureGeomBuilder.LayoutCiBuilder

get

Returns the save/layer layout builder

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe string NXOpen.CAM.FeatureGeomBuilder.MachineComponent

getset

Returns or sets the machine component

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXObject NXOpen.CAM.FeatureGeomBuilder.PartMaterialBuilder

getset

Returns or sets the part material

Created in NX5.0.0

Deprecated in NX8.0.2. Use method GetMaterialData instead.

License requirements to get this property: cam_base ("CAM BASE")

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeatureGeomBuilder.PartOffsetBuilder

get

Returns the part offset (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.FeatureGeomBuilder.PhysicalWorkpieceState

getset

Returns or sets the physical workpiece state

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.FeatureGeomBuilder.TrimOffsetBuilder

get

Returns the trim offset (inheritable double)

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

---

The documentation for this class was generated from the following file:

• CAM_FeatureGeomBuilder.cs