Represents a ThreadMilling Builder More...

Inheritance diagram for NXOpen.CAM.ThreadMillingBuilder:

Public Types
enum	MotionOutputTypes { MachineCycle, SingleMoves }
	available types for motion output More...

Properties
unsafe NXOpen.CAM.ThreadMillingCutParameters	CutParameters `[get]`
	Returns the Thread Milling Cut Parameters More...

unsafe NXOpen.CAM.ThreadMillingBuilder.MotionOutputTypes	MotionOutput `[get, set]`
	Returns or sets the motion output More...

unsafe NXOpen.CAM.OppositeDirection	OppositeDirectionBuilder `[get]`
	Returns the opposite direction builder More...

unsafe int	SpringPasses `[get, set]`
	Returns or sets the spring passes More...

Properties inherited from NXOpen.CAM.CylindricalMillingBuilder
unsafe NXOpen.CAM.StepoverBuilder	AxialStepover `[get]`
	Returns the Axial Stepover builder More...

unsafe NXOpen.CAM.StepoverBuilder	RadialStepover `[get]`
	Returns the Radial Stepover builder More...

Properties inherited from NXOpen.CAM.HoleMachiningBuilder
unsafe bool	CollisionCheck `[get, set]`
	Returns or sets the collision check for cutting More...

unsafe NXOpen.CAM.HoleMachiningCutParameters	CuttingParameters `[get]`
	Returns the Cut Parameters More...

unsafe NXOpen.CAM.FeedsBuilder	FeedsBuilder `[get]`
	Returns the feeds and speeds builder More...

unsafe NXOpen.CAM.NcmHoleMachining	NonCuttingBuilder `[get]`
	Returns the non-cutting moves builder More...

unsafe NXOpen.CAM.DimensionRule	PredefinedDepth `[get]`
	Returns the predefined depth More...

Properties inherited from NXOpen.CAM.OperationBuilder
unsafe string	ChannelName `[get, set]`
	Returns or sets the channel's name More...

unsafe string	Description `[get, set]`
	Returns or sets the description More...

unsafe NXOpen.CAM.PostEventsCiBuilder	EndOfPath `[get]`
	Returns the end event builder More...

unsafe NXOpen.CAM.UdeSet	EndUdeSet `[get]`
	Returns the end ude set More...

unsafe NXOpen.CAM.GeometryCiBuilder	Geometry `[get]`
	Returns the geometry builder More...

unsafe bool	GougeChecking `[get, set]`
	Returns or sets the gouge checking flag More...

unsafe NXOpen.CAM.OperationBuilder.HoleAxisTypes	HoleAxisType `[get, set]`
	Returns or sets the Hole Axis Type More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	HoleDepth `[get]`
	Returns the max depth distance builder More...

unsafe NXOpen.CAM.OperationBuilder.HoleDepthTypes	HoleDepthType `[get, set]`
	Returns or sets the Hole Depth Type More...

unsafe NXOpen.CAM.LayoutCiBuilder	LayoutAndLayer `[get]`
	Returns the Layer and Layout More...

unsafe NXOpen.CAM.ArcOutputTypeCiBuilder	MotionOutputBuilder `[get]`
	Returns the motion output builder More...

unsafe NXOpen.CAM.Notes	Notes `[get]`
	Returns the notes builder More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationBasedOnTypes	OptimizationBasedOn `[get, set]`
	Returns or sets the optimization based on in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationDistanceTypes	OptimizationDistanceMethod `[get, set]`
	Returns or sets the optimization distance method in operation More...

unsafe NXOpen.CAM.OperationBuilder.OptimizationLevelTypes	OptimizationLevel `[get, set]`
	Returns or sets the optimization level in operation More...

unsafe NXOpen.CAM.OperationDisplayOptionsBuilder	PathDisplayOptions `[get]`
	Returns the path display options builder More...

unsafe string	PostToolPathExit `[get, set]`
	Returns or sets the environment variable that points to the post tool path generation library which has the exit More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistance `[get]`
	Returns the Retract Distance builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	RetractDistanceOnToolAxisChange `[get]`
	Returns the Retract Distance on Tool Axis Change builder (inheritable double) More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	SafeClearance `[get]`
	Returns the safe clearance builder More...

unsafe bool	SelectToolFlag `[get, set]`
	Returns or sets the user selected tool More...

unsafe NXOpen.CAM.PostEventsCiBuilder	StartOfPath `[get]`
	Returns the start event builder More...

unsafe NXOpen.CAM.UdeSet	StartUdeSet `[get]`
	Returns the start ude set More...

unsafe NXOpen.CAM.ToolChangeCiBuilder	ToolChangeSetting `[get]`
	Returns the tool change builder More...

unsafe NXOpen.CAM.ToolPathEditorBuilder	ToolPathEditor `[get]`
	Returns the Tool Path Editor Builder More...

unsafe NXOpen.CAM.ToolPathSplitParametersBuilder	ToolPathSplitParametersBuilder `[get]`
	Returns the tool path split Parameters More...

Properties inherited from NXOpen.CAM.ParamBuilder
unsafe NXOpen.CAM.Ude	CycleEvent `[get]`
	Returns the cycle event More...

unsafe NXOpen.CAM.Cycle	CycleTable `[get]`
	Returns the cycle More...

unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes	OptimizationMethod `[get, set]`
	Returns or sets the optim method More...

unsafe NXOpen.CAM.NCGroup	TargetPocket `[get, set]`
	Returns or sets the target pocket More...

Properties inherited from NXOpen.Builder
unsafe NXOpen.PreviewBuilder	PreviewBuilder `[get]`
	Returns the preview builder subobject. More...

Properties inherited from NXOpen.TaggedObject
Tag	Tag `[get]`
	Returns the tag of this object. More...

Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink `[get]`
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.CAM.HoleMachiningBuilder
unsafe NXOpen.CAM.FBM.FeatureGeometry	GetFeatureGeometry ()
	Returns the feature geometry More...

unsafe void	RemoveOverrides ()
	Removes overridden attributes of features in the feature geometry More...

unsafe void	UnlockFeatures ()
	Unlocks locked features in the feature geometry More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a ThreadMilling Builder

To create a new instance of this class, use NXOpen.CAM.OperationCollection.CreateThreadMillingBuilder

Created in NX7.5.0

Member Enumeration Documentation

enum NXOpen.CAM.ThreadMillingBuilder.MotionOutputTypes

available types for motion output

Enumerator
MachineCycle	machine cycle
SingleMoves	single moves

Property Documentation

unsafe NXOpen.CAM.ThreadMillingCutParameters NXOpen.CAM.ThreadMillingBuilder.CutParameters

get

Returns the Thread Milling Cut Parameters

Created in NX7.5.0

Deprecated in NX9.0.3. Use CAM.HoleMachiningBuilder.CuttingParameters instead.

License requirements: None.

unsafe NXOpen.CAM.ThreadMillingBuilder.MotionOutputTypes NXOpen.CAM.ThreadMillingBuilder.MotionOutput

getset

Returns or sets the motion output

Created in NX1872.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.OppositeDirection NXOpen.CAM.ThreadMillingBuilder.OppositeDirectionBuilder

get

Returns the opposite direction builder

Created in NX8.5.0

Deprecated in NX1899.0.0. Use NXOpen.CAM.FBM.Feature.FlipDirection to change the Z-axis on the in-process feature instead.

License requirements: None.

unsafe int NXOpen.CAM.ThreadMillingBuilder.SpringPasses

getset

Returns or sets the spring passes

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_ThreadMillingBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation