|
NXOpen .NET Reference Guide
1899
|
|
NXOpen .NET Reference Guide
1899
|
Represents a RadialGrooveMilling Builder More...
Properties | |
| unsafe NXOpen.CAM.GrooveMillingBuilder.LevelSequencingType | LevelSequencing [get, set] |
| Returns or sets the level sequencing More... | |
| unsafe NXOpen.CAM.InheritableToolDepBuilder | OffsetFromStartDiameter [get] |
| Returns the Offset from Start Diameter More... | |
 Properties inherited from NXOpen.CAM.CylindricalMillingBuilder | |
| unsafe NXOpen.CAM.StepoverBuilder | AxialStepover [get] |
| Returns the Axial Stepover builder More... | |
| unsafe NXOpen.CAM.StepoverBuilder | RadialStepover [get] |
| Returns the Radial Stepover builder More... | |
| Properties inherited from NXOpen.CAM.HoleMachiningBuilder | |
| unsafe bool | CollisionCheck [get, set] |
| Returns or sets the collision check for cutting More... | |
| unsafe NXOpen.CAM.HoleMachiningCutParameters | CuttingParameters [get] |
| Returns the Cut Parameters More... | |
| unsafe NXOpen.CAM.FeedsBuilder | FeedsBuilder [get] |
| Returns the feeds and speeds builder More... | |
| unsafe NXOpen.CAM.NcmHoleMachining | NonCuttingBuilder [get] |
| Returns the non-cutting moves builder More... | |
| unsafe NXOpen.CAM.DimensionRule | PredefinedDepth [get] |
| Returns the predefined depth More... | |
| Properties inherited from NXOpen.CAM.OperationBuilder | |
| unsafe string | ChannelName [get, set] |
| Returns or sets the channel's name More... | |
| unsafe string | Description [get, set] |
| Returns or sets the description More... | |
| unsafe NXOpen.CAM.PostEventsCiBuilder | EndOfPath [get] |
| Returns the end event builder More... | |
| unsafe NXOpen.CAM.UdeSet | EndUdeSet [get] |
| Returns the end ude set More... | |
| unsafe NXOpen.CAM.GeometryCiBuilder | Geometry [get] |
| Returns the geometry builder More... | |
| unsafe bool | GougeChecking [get, set] |
| Returns or sets the gouge checking flag More... | |
| unsafe NXOpen.CAM.OperationBuilder.HoleAxisTypes | HoleAxisType [get, set] |
| Returns or sets the Hole Axis Type More... | |
| unsafe NXOpen.CAM.InheritableDoubleBuilder | HoleDepth [get] |
| Returns the max depth distance builder More... | |
| unsafe NXOpen.CAM.OperationBuilder.HoleDepthTypes | HoleDepthType [get, set] |
| Returns or sets the Hole Depth Type More... | |
| unsafe NXOpen.CAM.LayoutCiBuilder | LayoutAndLayer [get] |
| Returns the Layer and Layout More... | |
| unsafe NXOpen.CAM.ArcOutputTypeCiBuilder | MotionOutputBuilder [get] |
| Returns the motion output builder More... | |
| unsafe NXOpen.CAM.Notes | Notes [get] |
| Returns the notes builder More... | |
| unsafe NXOpen.CAM.OperationBuilder.OptimizationBasedOnTypes | OptimizationBasedOn [get, set] |
| Returns or sets the optimization based on in operation More... | |
| unsafe NXOpen.CAM.OperationBuilder.OptimizationDistanceTypes | OptimizationDistanceMethod [get, set] |
| Returns or sets the optimization distance method in operation More... | |
| unsafe NXOpen.CAM.OperationBuilder.OptimizationLevelTypes | OptimizationLevel [get, set] |
| Returns or sets the optimization level in operation More... | |
| unsafe NXOpen.CAM.OperationDisplayOptionsBuilder | PathDisplayOptions [get] |
| Returns the path display options builder More... | |
| unsafe string | PostToolPathExit [get, set] |
| Returns or sets the environment variable that points to the post tool path generation library which has the exit More... | |
| unsafe NXOpen.CAM.InheritableDoubleBuilder | RetractDistance [get] |
| Returns the Retract Distance builder (inheritable double) More... | |
| unsafe NXOpen.CAM.InheritableDoubleBuilder | RetractDistanceOnToolAxisChange [get] |
| Returns the Retract Distance on Tool Axis Change builder (inheritable double) More... | |
| unsafe NXOpen.CAM.InheritableDoubleBuilder | SafeClearance [get] |
| Returns the safe clearance builder More... | |
| unsafe bool | SelectToolFlag [get, set] |
| Returns or sets the user selected tool More... | |
| unsafe NXOpen.CAM.PostEventsCiBuilder | StartOfPath [get] |
| Returns the start event builder More... | |
| unsafe NXOpen.CAM.UdeSet | StartUdeSet [get] |
| Returns the start ude set More... | |
| unsafe NXOpen.CAM.ToolChangeCiBuilder | ToolChangeSetting [get] |
| Returns the tool change builder More... | |
| unsafe NXOpen.CAM.ToolPathEditorBuilder | ToolPathEditor [get] |
| Returns the Tool Path Editor Builder More... | |
| unsafe NXOpen.CAM.ToolPathSplitParametersBuilder | ToolPathSplitParametersBuilder [get] |
| Returns the tool path split Parameters More... | |
| Properties inherited from NXOpen.CAM.ParamBuilder | |
| unsafe NXOpen.CAM.Ude | CycleEvent [get] |
| Returns the cycle event More... | |
| unsafe NXOpen.CAM.Cycle | CycleTable [get] |
| Returns the cycle More... | |
| unsafe NXOpen.CAM.ParamBuilder.OptimizationTypes | OptimizationMethod [get, set] |
| Returns or sets the optim method More... | |
| unsafe NXOpen.CAM.NCGroup | TargetPocket [get, set] |
| Returns or sets the target pocket More... | |
| Properties inherited from NXOpen.Builder | |
| unsafe NXOpen.PreviewBuilder | PreviewBuilder [get] |
| Returns the preview builder subobject. More... | |
| Properties inherited from NXOpen.TaggedObject | |
| Tag | Tag [get] |
| Returns the tag of this object. More... | |
| Properties inherited from NXOpen.Utilities.NXRemotableObject | |
| IMessageSink | NextSink [get] |
| Gets the next message sink in the sink chain. More... | |
Additional Inherited Members | |
| Public Types inherited from NXOpen.CAM.OperationBuilder | |
| enum | HoleAxisTypes { Vector, Rule, RuleIfNoVector } |
| Available types for Hole Axis Type in feature milling and hole making More... | |
| enum | HoleDepthTypes { Point, Rule } |
| Available types for Hole Depth Type in feature milling and hole making More... | |
| enum | OptimizationBasedOnTypes { Dist, Orient } |
| Available types for optimization based on in operation More... | |
| enum | OptimizationDistanceTypes { Direct, Transition } |
| Available types for optimization distance method in operation More... | |
| enum | OptimizationLevelTypes { Standard, Advanced } |
| Available types for optimization level in operation More... | |
| Public Member Functions inherited from NXOpen.CAM.HoleMachiningBuilder | |
| unsafe NXOpen.CAM.FBM.FeatureGeometry | GetFeatureGeometry () |
| Returns the feature geometry More... | |
| unsafe void | RemoveOverrides () |
| Removes overridden attributes of features in the feature geometry More... | |
| unsafe void | UnlockFeatures () |
| Unlocks locked features in the feature geometry More... | |
| Protected Member Functions inherited from NXOpen.TaggedObject | |
| new void | initialize () |
| <exclude> More... | |
Represents a RadialGrooveMilling Builder
To create a new instance of this class, use NXOpen.CAM.OperationCollection.CreateRadialGrooveMillingBuilder
Created in NX9.0.3
|
getset |
Returns or sets the level sequencing
Created in NX9.0.3
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the Offset from Start Diameter
Created in NX9.0.3
License requirements: None.
