Represents a CAM. More...

Inheritance diagram for NXOpen.CAM.NcmTurnThreadBuilder:

Public Types
enum	LocalReturnMainModes { Opstop, ThreadPasses }
	The Local Return Main modes options More...

enum	LocalReturnModes { None, NumberOfStarts, NumberOfPasses }
	The Local Return modes options More...

enum	LocalReturnTypes { None, Direct, RadialAxial, AxialRadial, ClearRadialDirect, ClearAxialDirect, ClearRadial, ClearAxial, RadialClearAxialDirect, RadialAxialRadial, RadialClearAxial, ClearRadialClearAxialDirect, ClearRadialAxialRadial, ClearRadialClearAxial }
	The Cut regions type options More...

Properties
unsafe NXOpen.CAM.TurnThreadEngageRetractBuilder	EngageBuilder `[get]`
	Returns the Engage builder More...

unsafe NXOpen.CAM.PostEventsCiBuilder	LocalReturnFinishGetEndEvents `[get]`
	Returns the Local Return Finish End Events More...

unsafe NXOpen.CAM.PostEventsCiBuilder	LocalReturnFinishGetStartEvents `[get]`
	Returns the Local Return Finish Start Events More...

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnModes	LocalReturnFinishMode `[get, set]`
	Returns or sets the Local Return Finish Mode More...

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnTypes	LocalReturnFinishMove `[get, set]`
	Returns or sets the Local Return Finish Move More...

unsafe int	LocalReturnFinishNumberOfPasses `[get, set]`
	Returns or sets the Local Return Finish Number of Passes More...

unsafe NXOpen.Point	LocalReturnFinishPoint `[get, set]`
	Returns or sets the Local Return Finish Point More...

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnMainModes	LocalReturnMode `[get, set]`
	Returns or sets the Local Return Mode More...

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnTypes	LocalReturnMove `[get, set]`
	Returns or sets the Local Return Move More...

unsafe NXOpen.Point	LocalReturnPoint `[get, set]`
	Returns or sets the Local Return Point More...

unsafe NXOpen.CAM.PostEventsCiBuilder	LocalReturnRoughGetEndEvents `[get]`
	Returns the Local Return Rough End Events More...

unsafe NXOpen.CAM.PostEventsCiBuilder	LocalReturnRoughGetStartEvents `[get]`
	Returns the Local Return Rough Start Events More...

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnModes	LocalReturnRoughMode `[get, set]`
	Returns or sets the Local Return Rough Mode More...

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnTypes	LocalReturnRoughMove `[get, set]`
	Returns or sets the Local Return Rough Move More...

unsafe int	LocalReturnRoughNumberOfPasses `[get, set]`
	Returns or sets the Local Return Rough Number of Passes More...

unsafe NXOpen.Point	LocalReturnRoughPoint `[get, set]`
	Returns or sets the Local Return Rough Point More...

unsafe NXOpen.CAM.InheritableDoubleBuilder	MinimumClearanceBuilder `[get]`
	Returns the Minimum Clearance More...

unsafe int	Opstops `[get, set]`
	Returns or sets the Opstops More...

unsafe NXOpen.CAM.TurnThreadEngageRetractBuilder	RetractBuilder `[get]`
	Returns the Retract builder More...

Properties inherited from NXOpen.CAM.NcmTurningBuilder
unsafe bool	AvoidanceAfterLastRetract `[get, set]`
	Returns or sets the prefer direct motion after last retract More...

unsafe NXOpen.CAM.TurnAvoidanceApproachBuilder	AvoidanceApproachBuilder `[get]`
	Returns the approach path builder More...

unsafe bool	AvoidanceBetweenRegions `[get, set]`
	Returns or sets the prefer direct motion between regions More...

unsafe NXOpen.CAM.TurnAvoidanceClearanceBuilder	AvoidanceClearanceBuilder `[get]`
	Returns the clearance builder More...

unsafe NXOpen.CAM.TurnAvoidanceDepartureBuilder	AvoidanceDepartureBuilder `[get]`
	Returns the departure path builder More...

unsafe NXOpen.CAM.TurnAvoidanceFromBuilder	AvoidanceFromBuilder `[get]`
	Returns the avoidance from builder More...

unsafe NXOpen.CAM.TurnAvoidanceGohomeBuilder	AvoidanceGohomeBuilder `[get]`
	Returns the gohome point builder More...

unsafe NXOpen.CAM.TurnAvoidanceReturnBuilder	AvoidanceReturnBuilder `[get]`
	Returns the return path builder More...

unsafe NXOpen.CAM.TurnAvoidanceStartBuilder	AvoidanceStartBuilder `[get]`
	Returns the avoidance start builder More...

unsafe NXOpen.CAM.TurnAvoidanceStartOfEngageBuilder	AvoidanceStartOfEngageBuilder `[get]`
	Returns the start of engage builder More...

unsafe bool	AvoidanceToStartOfEngage `[get, set]`
	Returns or sets the prefer direct motion to start of engage More...

unsafe NXOpen.CAM.Cutcom	Cutcom `[get]`
	Returns the cutter compensation builder More...

unsafe NXOpen.CAM.NcmHoleMachining	NcmHoleMachiningBuilder `[get]`
	Returns the non cutting moves hole machining builder More...

Properties inherited from NXOpen.CAM.NcmSubopBuilder
unsafe NXOpen.CAM.NcmSubopBuilder.DefaultRegionStartTypes	DefaultRegionStartType `[get, set]`
	Returns or sets the region start type More...

unsafe NXOpen.CAM.InheritableToolDepBuilder	StartPointsEffectDistBuilder `[get]`
	Returns the region start points effective distance builder (inheritable tool dep) More...

unsafe bool	StartPointsUseEffectDist `[get, set]`
	Returns or sets the start points use effective distance More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.CAM.NcmSubopBuilder
unsafe void	GetRegionStartPoints (out NXOpen.Point[] regionStartPoints)
	Returns region start points More...

unsafe void	SetRegionStartPoints (NXOpen.Point[] regionStartPoints)
	Sets region start points More...

Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a CAM.

NcmTurnThreadBuilder

Created in NX6.0.0

Member Enumeration Documentation

enum NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnMainModes

The Local Return Main modes options

Enumerator
Opstop	Opstop
ThreadPasses	Thread Passes

enum NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnModes

The Local Return modes options

Enumerator
None	None
NumberOfStarts	Number of Starts
NumberOfPasses	Number of Passes

enum NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnTypes

The Cut regions type options

Enumerator
None	None
Direct	Direct
RadialAxial	Radial-Axial
AxialRadial	Axial-Radial
ClearRadialDirect	Clear Radial-Direct
ClearAxialDirect	Clear Axial-Direct
ClearRadial	Clear Radial
ClearAxial	Clear Axial
RadialClearAxialDirect	Radial-Clear Axial-Direct
RadialAxialRadial	Radial-Axial-Radial
RadialClearAxial	Radial-Clear Axial
ClearRadialClearAxialDirect	Clear Radial-Clear Axial-Direct
ClearRadialAxialRadial	Clear Radial-Axial-Radial
ClearRadialClearAxial	Clear Radial-Clear Axial

Property Documentation

unsafe NXOpen.CAM.TurnThreadEngageRetractBuilder NXOpen.CAM.NcmTurnThreadBuilder.EngageBuilder

get

Returns the Engage builder

Created in NX6.0.0

License requirements: None.

unsafe NXOpen.CAM.PostEventsCiBuilder NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnFinishGetEndEvents

get

Returns the Local Return Finish End Events

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.PostEventsCiBuilder NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnFinishGetStartEvents

get

Returns the Local Return Finish Start Events

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnModes NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnFinishMode

getset

Returns or sets the Local Return Finish Mode

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnTypes NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnFinishMove

getset

Returns or sets the Local Return Finish Move

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnFinishNumberOfPasses

getset

Returns or sets the Local Return Finish Number of Passes

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.Point NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnFinishPoint

getset

Returns or sets the Local Return Finish Point

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnMainModes NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnMode

getset

Returns or sets the Local Return Mode

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnTypes NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnMove

getset

Returns or sets the Local Return Move

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.Point NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnPoint

getset

Returns or sets the Local Return Point

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.PostEventsCiBuilder NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnRoughGetEndEvents

get

Returns the Local Return Rough End Events

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.PostEventsCiBuilder NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnRoughGetStartEvents

get

Returns the Local Return Rough Start Events

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnModes NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnRoughMode

getset

Returns or sets the Local Return Rough Mode

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnTypes NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnRoughMove

getset

Returns or sets the Local Return Rough Move

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnRoughNumberOfPasses

getset

Returns or sets the Local Return Rough Number of Passes

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.Point NXOpen.CAM.NcmTurnThreadBuilder.LocalReturnRoughPoint

getset

Returns or sets the Local Return Rough Point

Created in NX8.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.InheritableDoubleBuilder NXOpen.CAM.NcmTurnThreadBuilder.MinimumClearanceBuilder

get

Returns the Minimum Clearance

Created in NX6.0.0

License requirements: None.

unsafe int NXOpen.CAM.NcmTurnThreadBuilder.Opstops

getset

Returns or sets the Opstops

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnThreadEngageRetractBuilder NXOpen.CAM.NcmTurnThreadBuilder.RetractBuilder

get

Returns the Retract builder

Created in NX6.0.0

License requirements: None.

The documentation for this class was generated from the following file:

CAM_NcmTurnThreadBuilder.cs

Public Types

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Property Documentation