NXOpen.CAM.TurnAvoidanceStartBuilder Class Reference

Represents an avoidance start Builder More...

Inheritance diagram for NXOpen.CAM.TurnAvoidanceStartBuilder:

Public Types
enum	StartPointModes { Point, DeltaAngleDistance, DeltaVectorDistance, DeltaMove }
	the start point mode options More...
enum	StartPointMotionTypes {   None, Direct, RadialThenAxial, AxialThenRadial,   ClearRadialThenDirect, ClearAxialThenDirect }
	The start point motion type options More...

Properties
unsafe double	StartDeltaAngle [get, set]
	Returns or sets the start delta angle More...
unsafe double	StartDeltaDistance [get, set]
	Returns or sets the start delta distance More...
unsafe NXOpen.NXObject	StartDeltaVector [get, set]
	Returns or sets the start delta vector More...
unsafe double	StartDeltaX [get, set]
	Returns or sets the start delta X More...
unsafe double	StartDeltaY [get, set]
	Returns or sets the start delta Y More...
unsafe NXOpen.Point	StartPoint [get, set]
	Returns or sets the start point More...
unsafe NXOpen.CAM.TurnAvoidanceStartBuilder.StartPointModes	StartPointMode [get, set]
	Returns or sets the start point mode More...
unsafe NXOpen.CAM.TurnAvoidanceStartBuilder.StartPointMotionTypes	StartPointMotionType [get, set]
	Returns or sets the start point motion type More...
Properties inherited from NXOpen.TaggedObject
Tag	Tag [get]
	Returns the tag of this object. More...
Properties inherited from NXOpen.Utilities.NXRemotableObject
IMessageSink	NextSink [get]
	Gets the next message sink in the sink chain. More...

Additional Inherited Members
Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...
void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...
override string	ToString ()
	Returns a String that represents the current Object. More...
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents an avoidance start Builder

Created in NX6.0.0

Member Enumeration Documentation

enum NXOpen.CAM.TurnAvoidanceStartBuilder.StartPointModes

the start point mode options

Enumerator
Point	Point is defined by point.
DeltaAngleDistance	Point is defined by angle and distance.
DeltaVectorDistance	Point is defined by vector and distance.
DeltaMove	Point is defined by delta move (X and Y coordinate).

enum NXOpen.CAM.TurnAvoidanceStartBuilder.StartPointMotionTypes

The start point motion type options

Enumerator
None	Point is inactive.
Direct	Motion type: Direct to point.
RadialThenAxial	Motion type: Radial then axial to point.
AxialThenRadial	Motion type: Axial then axial to point.
ClearRadialThenDirect	Motion type: Radial to clearance plane then direct to point.
ClearAxialThenDirect	Motion type: Axial to clearance plane then direct to point.

Property Documentation

unsafe double NXOpen.CAM.TurnAvoidanceStartBuilder.StartDeltaAngle

getset

Returns or sets the start delta angle

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnAvoidanceStartBuilder.StartDeltaDistance

getset

Returns or sets the start delta distance

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXObject NXOpen.CAM.TurnAvoidanceStartBuilder.StartDeltaVector

getset

Returns or sets the start delta vector

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnAvoidanceStartBuilder.StartDeltaX

getset

Returns or sets the start delta X

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.TurnAvoidanceStartBuilder.StartDeltaY

getset

Returns or sets the start delta Y

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.Point NXOpen.CAM.TurnAvoidanceStartBuilder.StartPoint

getset

Returns or sets the start point

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnAvoidanceStartBuilder.StartPointModes NXOpen.CAM.TurnAvoidanceStartBuilder.StartPointMode

getset

Returns or sets the start point mode

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.TurnAvoidanceStartBuilder.StartPointMotionTypes NXOpen.CAM.TurnAvoidanceStartBuilder.StartPointMotionType

getset

Returns or sets the start point motion type

Created in NX6.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

---

The documentation for this class was generated from the following file:

• CAM_TurnAvoidanceStartBuilder.cs