Inheritance diagram for NXOpen.CAM.CAMSetup:

Public Types
enum	OutputUnits { Inch, Metric, PostDefined }
	Output units used in output clsf and postprocess. More...

enum	Paste { Before, Inside, After }
	Paste position. More...

enum	PostprocessSettingsOutputWarning { Yes, No, PostDefined }
	Output warning setting for Postprocess More...

enum	PostprocessSettingsPostMode { Normal = -1, AdvancedAuto, AdvancedRegenerate, AdvancedReuse }
	post mode setting for Postprocess More...

enum	PostprocessSettingsReviewTool { On, Off, PostDefined }
	Review tool setting for Postprocess More...

enum	Ude { Start, End }
	The UDE type More...

enum	View { ProgramOrder, MachineMethod, Geometry, MachineTool }
	ONT view. More...

Public Types inherited from NXOpen.CAM.CAMObject
enum	Attr { ProjDiffTaxis = 1, ProfileFlipMside, BndSplineTangent, BlankNormalDiffTaxis, BndHasSleepObj, ClrnrNotParallelTaxis, BndNotParallelFloor, FloorNotUpToDate, SingleProfileWithFirstCut, CutterConversionProblem, PredefinedDepthConversionProblem, AcceptDrivePosition = 100, Reparametrization = 110, BetweenFromStart = 120, CurveCutRange = 130, FixGssmCornerData = 140, PlmConversion = 150, PlmFeedcomp, PlmFillet, PlmSlowdown, PlmGeometry, WedmPoints = 160, CavityMillInheritTrimBnds = 170, RtdObsolete = 1000, ZlevelHolderParamChange = 2000, NcmObsoleteSeqControl = 2100, NcmObsoleteCustomFeed, NcmObsoleteLocalRetract, NcmClearTraversalZero, NcmObsoleteEngretToClearance, GmcInvalidNxVersion = 2201, ProbingInvalidNxVersion, InspPathInvalidNxVersion = 2300, CustomDataGougingObsolete, CustomDataGougingPartObsolete, CustomDataGougingDriveObsolete, CustomDataIgnoreLoopsObsolete, CustomDataIgnoreLoopsRemoved, LimitToolRunOn = 2400, ScoprNcmChangeLinearNormalToPart, PossibleToolAxisProblem }
	Represents the CAM attribute type. More...

enum	FeedRateUnit { None, PerMinute, PerRevolution }
	The unit of feed rate More...

enum	Status { Complete, Repost, Regen, Approved = 4 }
	The status of the object More...

Public Types inherited from NXOpen.NXObject
enum	AttributeType { Invalid, Null, Boolean, Integer, Real, String, Time, Reference, Any = 100 }
	Specifies attribute type. More...

enum	DateAndTimeFormat { Numeric, Textual }
	Specifies the format of the date and time attribute. More...

Public Member Functions
unsafe int[]	ApplyRoboticRules (NXOpen.CAM.CAMObject[] pOperations, bool askForValidation, bool doNotShowSuccessMessages)
	Apply Robotic rules to a list of operations More...

unsafe void	ApproveObjects (NXOpen.CAM.CAMObject[] objects)
	Approve objects More...

unsafe void	BufferObjects (NXOpen.CAM.CAMSetup.View view, NXOpen.CAM.CAMObject[] objectsToBeBuffered)
	Buffer objects to the clipboard and prepare for copy later More...

unsafe void	CopyFromComponent ()
	Copy From Component. More...

unsafe NXOpen.CAM.CAMObject[]	CopyObjects (NXOpen.CAM.CAMSetup.View view, NXOpen.CAM.CAMObject[] objectsToBeMoved, NXOpen.CAM.CAMObject destinationObject, NXOpen.CAM.CAMSetup.Paste pastePosition)
	Copy objects More...

unsafe NXOpen.CAM.CAMObject[]	CopyObjectsWithReference (NXOpen.CAM.CAMSetup.View view, NXOpen.CAM.CAMObject[] objectsToBeMoved, NXOpen.CAM.CAMObject destinationObject, NXOpen.CAM.CAMSetup.Paste pastePosition)
	Copy objects with reference More...

unsafe NXOpen.CAM.CutDepthChecker	CreateCutDepthChecker ()
	Creates a Cut Depth Checker. More...

unsafe NXOpen.CAM.MirrorBuilder	CreateEditMirrorBuilder (NXOpen.CAM.CAMObject[] objectsToMirror)
	Create edit mirror builder. More...

unsafe NXOpen.CAM.FeatureProcessBuilder	CreateFeatureProcessBuilder ()
	Creates a CAM. More...

unsafe NXOpen.CAM.FeatureRecognitionBuilder	CreateFeatureRecognitionBuilder (NXOpen.CAM.CAMObject param)
	Creates a CAM. More...

unsafe NXOpen.CAM.FeatureTeaching	CreateFeatureTeaching (NXOpen.CAM.CAMObject param)
	Creates a CAM. More...

unsafe NXOpen.CAM.ObjectsFeedsBuilder	CreateFeedsBuilder (NXOpen.CAM.CAMObject[]@params)
	Create Feeds builder. More...

unsafe NXOpen.CAM.FeedsOptimizeBuilder	CreateFeedsOptimizeBuilder (NXOpen.CAM.CAMObject param)
	Creates a feeds optimize builder More...

unsafe NXOpen.CAM.GougeCheckBuilder	CreateGougeCheckBuilder (NXOpen.CAM.CAMObject[] objects)
	Create Gouge Check builder. More...

unsafe NXOpen.CAM.MirrorBuilder	CreateMirrorBuilder (NXOpen.CAM.CAMObject[] objectsToMirror)
	Create Mirror builder. More...

unsafe NXOpen.CAM.NCAssistantBuilder	CreateNCAssistantBuilder ()
	Creates NC Assistant builder More...

unsafe NXOpen.CAM.NcmctPartMountingBuilder	CreateNcmctPartMountingBuilder (string libRef)
	Creates a Part Mounting Builder. More...

unsafe NXOpen.CAM.ObjectNotes	CreateObjectNotes (NXOpen.CAM.CAMObject opr)
	Create Notes. More...

unsafe NXOpen.CAM.ObjectsUdeSet	CreateObjectsUdeSet (NXOpen.CAM.CAMObject[]@params, NXOpen.CAM.CAMSetup.Ude udeType)
	Create ObjectsUdeSet. More...

unsafe NXOpen.CAM.ObjectsUdeSet	CreateObjectsUdeSet (NXOpen.CAM.CAMObject[]@params, NXOpen.CAM.CAMSetup.Ude udeType, NXOpen.CAM.CAMFeature[] features)
	Create ObjectsUdeSet for features More...

unsafe NXOpen.CAM.ObjectWorkInstructionBuilder	CreateObjectWorkInstructionBuilder (NXOpen.CAM.CAMObject param)
	Create Object Work Instruction builder for authoring Work Instructions. More...

unsafe NXOpen.CAM.OperationTeaching	CreateOperationTeaching (NXOpen.CAM.CAMObject param)
	Creates a CAM. More...

unsafe NXOpen.CAM.OperationTransformBuilder	CreateOperationTransformBuilder (NXOpen.CAM.CAMObject[] objectsToTransform)
	Create Transform builder. More...

unsafe NXOpen.CAM.PreprocessGeometryBuilder	CreatePreprocessGeometryBuilder ()
	Creates a preprocess geometry builder More...

unsafe NXOpen.CAM.SurfaceRegions	CreateSurfaceRegions (NXOpen.Features.Feature feature)
	Creates a surface regions builder More...

unsafe NXOpen.CAM.ToolPathDivideBuilder	CreateToolPathDivideBuilder (NXOpen.CAM.CAMObject[] tpObjectsToDivide)
	Create Tool Path Divide builder More...

unsafe NXOpen.CAM.ToolPathSplitBuilder	CreateToolPathSplitBuilder (NXOpen.CAM.CAMObject[] tpObjectsToDivide)
	Create Tool Path Split by Holder builder More...

unsafe NXOpen.CAM.ToolPathTiltBuilder	CreateToolPathTiltBuilder (NXOpen.CAM.CAMObject[] tpObjectsToTilt)
	Create Tool Path Tilt builder More...

unsafe NXOpen.CAM.WorkInstructionBuilder	CreateWorkInstructionBuilder (NXOpen.CAM.CAMObject param)
	Create Work Instruction builder for authoring Work Instructions. More...

unsafe NXOpen.CAM.WorkInstructionOutputBuilder	CreateWorkInstructionOutputBuilder ()
	Create Work Instruction Output builder for publishing Work Instructions. More...

unsafe void	CustomizationUpdateFromObject (NXOpen.CAM.CAMObject destinationObject, NXOpen.CAM.CAMObject sourceObject)
	Customize from Object More...

unsafe void	CustomizationUpdateFromTemplate (NXOpen.CAM.CAMObject[] objects)
	Customize from Template More...

unsafe void	CutObjects (NXOpen.CAM.CAMSetup.View view, NXOpen.CAM.CAMObject[] objectsToBeMoved)
	Cut objects More...

unsafe void	Delete3dWorkpieces (NXOpen.CAM.CAMObject[] objects)
	Delete 3D workpieces of the selected operations More...

unsafe void	DeleteToolPath (NXOpen.CAM.CAMObject[] objects)
	Delete tool path More...

unsafe void	DeleteVnckMachineData ()
	Removes vnck machine data More...

unsafe void	DeleteWorkInstructions (NXOpen.CAM.CAMObject[] objects)
	Delete Work Instructions More...

unsafe void	DivideToolPaths (NXOpen.CAM.CAMObject[] objects, NXOpen.CAM.ToolPathDivideBuilder builder)
	Tool Path Divide More...

unsafe void	GenerateToolPath (NXOpen.CAM.CAMObject[] objects)
	Generate tool path More...

unsafe NXOpen.CAM.CAMObject	GetCamExitObject ()
	Get the param object which is invoking the exit API More...

unsafe string	GetMachineLibref ()
	Get machine libref More...

unsafe string	GetPartMaterial ()
	Part material More...

unsafe void	GetPartMaterialData (out string libref, out string name, out string description, out string code, out string hardness)
	Get part material data More...

unsafe NXOpen.CAM.NCGroup	GetRoot (NXOpen.CAM.CAMSetup.View branch)
	Get root of the specified branch. More...

unsafe void	GougeCheck (NXOpen.CAM.CAMObject[] objects, bool checkForHolderCollision)
	Gouge Check More...

unsafe void	GougeCheck (NXOpen.CAM.CAMObject[] objects, bool checkForHolderCollision, bool useParametric, bool useUserdefStock, double userdefStock)
	Gouge Check More...

unsafe bool	HasSuppressedGeom (NXOpen.CAM.CAMObject param)
	Check for suppressed geometry More...

unsafe bool	IsGroup (NXOpen.CAM.CAMObject camObject)
	Check if the specified object is a group. More...

unsafe bool	IsOperation (NXOpen.CAM.CAMObject camobject)
	Check if the specified object is an operation. More...

unsafe bool	IsToolPathLocked (NXOpen.CAM.CAMObject @object)
	Lock Tool Path More...

unsafe void	ListToolPath (NXOpen.CAM.CAMObject[] objects)
	List tool path More...

unsafe void	LockToolPaths (NXOpen.CAM.CAMObject[] objects, bool @lock)
	Lock Tool Path More...

unsafe void	MinToolLen (NXOpen.CAM.CAMObject[] objects)
	Minimum tool length More...

unsafe void	MoveObjects (NXOpen.CAM.CAMSetup.View view, NXOpen.CAM.CAMObject[] objectsToBeMoved, NXOpen.CAM.CAMObject destinationObject, NXOpen.CAM.CAMSetup.Paste pastePosition)
	Move objects More...

unsafe void	Optimize (NXOpen.CAM.CAMObject[] objects, bool consolidateTools, bool minimizeToolChanges, bool createOptimizationGroup)
	Optimize More...

unsafe void	OutputClsf (NXOpen.CAM.CAMObject[] objects, string clsfFormat, string outfileName, NXOpen.CAM.CAMSetup.OutputUnits outputUnits)
	Output CLSF More...

unsafe void	ParallelCreate3d (NXOpen.CAM.CAMObject[] objects)
	Parallel create 3D More...

unsafe void	ParallelGenerate (NXOpen.CAM.CAMObject[] objects)
	Parallel Generate tool path More...

unsafe void	Postprocess (NXOpen.CAM.CAMObject[] objects, string machineType, string outfileName, NXOpen.CAM.CAMSetup.OutputUnits outputUnits)
	Postprocess More...

unsafe void	PostprocessMultichannel (NXOpen.CAM.CAMObject[] objects, string outfileName)
	Postprocess multichannel machine without triggering synch manager More...

unsafe void	PostprocessWithSetting (NXOpen.CAM.CAMObject[] objects, string machineType, string outfileName, NXOpen.CAM.CAMSetup.OutputUnits outputUnits, NXOpen.CAM.CAMSetup.PostprocessSettingsOutputWarning outputWarning, NXOpen.CAM.CAMSetup.PostprocessSettingsReviewTool reviewTool)
	Postprocess More...

unsafe void	RemoveDependencies (NXOpen.CAM.CAMObject[] objects)
	Remove dependencies of selected objects More...

unsafe void	RemoveMachine ()
	Removes: More...

unsafe void	RemoveSuppressedGeom (NXOpen.CAM.CAMObject param)
	Remove suppressed geometry More...

unsafe void	ReplayToolPath (NXOpen.CAM.CAMObject[] objects)
	Replay tool path More...

unsafe void	RestoreDependencies (NXOpen.CAM.CAMObject[] objects)
	Restore dependencies of selected objects More...

unsafe NXOpen.CAM.NCGroup	RetrieveDevice (string libRef)
	Retrieve a device from library More...

unsafe NXOpen.CAM.Tool	RetrieveTool (string libRef, out bool success)
	Retrieve a tool from library More...

unsafe NXOpen.CAM.Tool	RetrieveTool (string libRef, NXOpen.CAM.CAMObject target, out NXOpen.CAM.CAMObject nextTarget, out bool success)
	Retrieve a tool from library to the target More...

unsafe NXOpen.CAM.CAMObject.ErrorItem[]	SetMachiningData (NXOpen.CAM.CAMObject[] objects)
	Set Machining Data More...

unsafe void	SetPartMaterial (string libRef)
	Part material More...

unsafe void	SetTemplateStatus (NXOpen.CAM.CAMObject[] objects, bool useAsParent, bool createIfParentCreated)
	Set Template status More...

unsafe void	Show2dWorkpiece (NXOpen.CAM.CAMObject[] objects)
	Show 2D workpiece More...

unsafe void	Show2dWorkpieceIn (NXOpen.CAM.CAMObject[] objects)
	Show ingoing 2D workpiece More...

unsafe void	Show2dWorkpieceOut (NXOpen.CAM.CAMObject[] objects)
	Show outgoing 2D workpiece More...

unsafe void	Show3dWorkpiece (NXOpen.CAM.CAMObject[] objects)
	Show 3D workpiece More...

unsafe void	ShowSpinning3dWorkpiece (NXOpen.CAM.CAMObject[] objects)
	Show spinning 3D workpiece More...

unsafe void	SplitToolPaths (NXOpen.CAM.CAMObject[] objects, NXOpen.CAM.ToolPathSplitBuilder builder)
	Tool Path Split by Holder More...

unsafe void	SwitchLayerLayout (NXOpen.CAM.CAMObject @object)
	Switch Layer and Layout More...

unsafe void	TiltToolPaths (NXOpen.CAM.CAMObject[] objects, NXOpen.CAM.ToolPathTiltBuilder builder)
	Tool Path Tilt More...

unsafe void	TrimToolPath (NXOpen.CAM.OperationBuilder operationBuilder)
	Interactive Tool Path Trim More...

unsafe void	UnapproveObjects (NXOpen.CAM.CAMObject[] objects)
	Unapprove objects More...

unsafe void	UpdateGeometryDependencies (NXOpen.CAM.CAMObject[] objects)
	Update geometry dependencies of selected objects More...

unsafe bool	UpdateResourcesOnRule ()
	Update Resources (Machine, Tools, Devices) based on assembly loading rule More...

unsafe void	ValidateRoboticPaths (NXOpen.CAM.CAMObject[] pOperations, bool checkForCollisions, bool displayFindings)
	Validate the robotic paths More...

Public Member Functions inherited from NXOpen.CAM.CAMObject
unsafe bool	AskPathExists ()
	Tells if the object has a path More...

unsafe void	ConvertToExplorerDialog ()
	Change the dialog customization of the object to use the explorer dialog style More...

unsafe NXOpen.CAM.Path	CreateEmptyPath ()
	Create an empty path for the object More...

unsafe bool	GetBooleanValue (string title)
	Get the boolean value of the parameter index from the object More...

unsafe NXOpen.CAM.CAMObject.FeedRateUnit	GetFeedRate (string title, out double value)
	Get the feed rate value and unit of the parameter index from the object More...

unsafe int	GetFeedRateColor (string title)
	Get the feed rate color of the parameter index from the object. More...

unsafe int[]	GetIntegerArrayValue (string title)
	Get the integer array value of the parameter index from the object. More...

unsafe int	GetIntegerValue (string title)
	Get the integer value of the parameter index from the object. More...

unsafe NXOpen.NXObject	GetObject (string title)
	Get the object value of the parameter index from the object More...

unsafe NXOpen.NXObject[]	GetObjectArrayValue (string title)
	Get the object array value of the parameter index from the object. More...

unsafe NXOpen.CAM.Path	GetPath ()
	Returns the path More...

unsafe double[]	GetRealArrayValue (string title)
	Get the real array value of the parameter index from the object. More...

unsafe double	GetRealValue (string title)
	Get the real value of the parameter index from the object. More...

unsafe NXOpen.CAM.CAMObject.Status	GetStatus ()
	Get the status of the input object. More...

unsafe string[]	GetStringArrayValue (string title)
	Get the string array value of the parameter index from the object. More...

unsafe string	GetStringValue (string title)
	Get the string value of the parameter index from the object More...

unsafe int	GetWireEdmFeedRate (string title, out double value)
	Get the feed rate value and side of the parameter index from the object, side is only used in wire edm. More...

unsafe bool	Has911Attribute (NXOpen.CAM.CAMObject.Attr attrId)
	Check if a 911 attribute exists in an object. More...

unsafe void	Remove911Attribute (NXOpen.CAM.CAMObject.Attr attrId)
	Remove a specific 911 attribute from an object. More...

unsafe void	RemoveAll911Attributes ()
	Remove all 911 attributes from an object. More...

unsafe void	SavePath (NXOpen.CAM.Path theBuilder)
	This must be called to establish proper part status More...

unsafe void	SetBooleanValue (string title, bool value)
	Set a boolean value to the parameter index for the object. More...

unsafe void	SetFeedRate (string title, double value, NXOpen.CAM.CAMObject.FeedRateUnit unit)
	Set feed rate value and unit to the parameter index for the object. More...

unsafe void	SetFeedRateColor (string title, int value)
	Set feed rate display color to the parameter index for the object. More...

unsafe void	SetIntegerArrayValue (string title, int[] value)
	Set integer array value to the parameter index for the object. More...

unsafe void	SetIntegerValue (string title, int value)
	Set an integer value to the parameter index for the object. More...

unsafe void	SetObject (string title, NXOpen.NXObject value)
	Set a object to the parameter index for the object. More...

unsafe void	SetObjectArrayValue (string title, NXOpen.NXObject[] value)
	Set object array to the parameter index for the object More...

unsafe void	SetRealArrayValue (string title, double[] value)
	Set real array to the parameter index for the object. More...

unsafe void	SetRealValue (string title, double value)
	Set a real value to the parameter index for the object. More...

unsafe void	SetStringArrayValue (string title, string[] value)
	Set string array to the parameter index for the object More...

unsafe void	SetStringValue (string title, string value)
	Set a string value to the parameter index for the object. More...

unsafe void	SetWireEdmFeedRate (string title, double value, int side)
	Set feed rate value and side to the parameter index for the object, side is only used in wire edm. More...

Public Member Functions inherited from NXOpen.NXObject
unsafe NXOpen.AttributeIterator	CreateAttributeIterator ()
	Create an attribute iterator More...

unsafe void	DeleteAllAttributesByType (NXOpen.NXObject.AttributeType type)
	Deletes all attributes of a specific type. More...

unsafe void	DeleteAllAttributesByType (NXOpen.NXObject.AttributeType type, NXOpen.Update.Option option)
	Deletes all attributes of a specific type with the option to update or not. More...

unsafe void	DeleteAttributeByTypeAndTitle (NXOpen.NXObject.AttributeType type, string title)
	Deletes an attribute by type and title. More...

unsafe void	DeleteAttributeByTypeAndTitle (NXOpen.NXObject.AttributeType type, string title, NXOpen.Update.Option option)
	Deletes an attribute by type and title with the option to update or not. More...

unsafe void	DeleteUserAttribute (NXOpen.NXObject.AttributeType type, string title, bool deleteEntireArray, NXOpen.Update.Option option)
	Deletes the first attribute encountered with the given Type, Title. More...

unsafe void	DeleteUserAttributes (NXOpen.AttributeIterator iterator, NXOpen.Update.Option option)
	Deletes the attributes on the object, if any, that satisfy the given iterator More...

unsafe void	DeleteUserAttributes (NXOpen.NXObject.AttributeType type, NXOpen.Update.Option option)
	Deletes the attributes encountered with the given Type with option to update or not. More...

unsafe NXOpen.INXObject	FindObject (string journalIdentifier)
	Finds the NXOpen.NXObject with the given identifier as recorded in a journal. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetAttributeTitlesByType (NXOpen.NXObject.AttributeType type)
	Gets all the attribute titles of a specific type. More...

unsafe bool	GetBooleanUserAttribute (string title, int index)
	Gets a boolean attribute by Title and array Index. More...

unsafe NXOpen.NXObject.ComputationalTime	GetComputationalTimeUserAttribute (string title, int index)
	Gets a time attribute by Title and array Index. More...

unsafe int	GetIntegerAttribute (string title)
	Gets an integer attribute by title. More...

unsafe int	GetIntegerUserAttribute (string title, int index)
	Gets an integer attribute by Title and array Index. More...

unsafe bool	GetNextUserAttribute (NXOpen.AttributeIterator iterator, out NXOpen.NXObject.AttributeInformation info)
	Gets the next attribute encountered on the object, if any, that satisfies the given iterator. More...

unsafe string	GetPdmReferenceAttributeValue (string attributeTitle)
	Gets the value of PDM Reference attribute for given object. More...

unsafe double	GetRealAttribute (string title)
	Gets a real attribute by title. More...

unsafe double	GetRealUserAttribute (string title, int index)
	Gets a real attribute by Title and array Index. More...

unsafe string	GetReferenceAttribute (string title)
	Gets the reference string (not the calculated value) of a string attribute that uses a reference string. More...

unsafe string	GetStringAttribute (string title)
	Gets a string attribute value by title. More...

unsafe string	GetStringUserAttribute (string title, int index)
	Gets a string attribute by Title and array Index. More...

unsafe string	GetTimeAttribute (NXOpen.NXObject.DateAndTimeFormat format, string title)
	Gets a time attribute by title. More...

unsafe string	GetTimeUserAttribute (string title, int index)
	Gets a time attribute by Title and array Index. More...

unsafe NXOpen.NXObject.AttributeInformation	GetUserAttribute (string title, NXOpen.NXObject.AttributeType type, int index)
	Gets the first attribute encountered on the object, if any, with a given Title, Type and array Index. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttribute (string title, bool includeUnset, bool addStringValues, NXOpen.NXObject.AttributeType type)
	Gets the first attribute (or attribute array) encountered on the object, if any, with a given Title and Type. More...

unsafe string	GetUserAttributeAsString (string title, NXOpen.NXObject.AttributeType type, int index)
	Gets the first attribute encountered on the object, if any, with a given title, type and array index. More...

unsafe int	GetUserAttributeCount (NXOpen.AttributeIterator iterator)
	Gets the count of set attributes on the object, if any, that satisfy the given iterator. More...

unsafe int	GetUserAttributeCount (NXOpen.AttributeIterator iterator, bool countArrayAsOneAttribute)
	Gets the count of set attributes on the object, if any, that satisfy the given iterator. More...

unsafe int	GetUserAttributeCount (NXOpen.NXObject.AttributeType type)
	Gets the count of set attributes on the object, if any, of the given type. More...

unsafe int	GetUserAttributeCount (NXOpen.NXObject.AttributeType type, bool includeUnset, bool countArrayAsOneAttribute)
	Gets the count of attributes on the object, if any, of the given type. More...

unsafe bool	GetUserAttributeLock (string title, NXOpen.NXObject.AttributeType type)
	Determine the lock of the given attribute. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttributes (NXOpen.AttributeIterator iterator)
	Gets all the attributes that have been set on the given object, if any, that satisfy the given iterator. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttributes ()
	Gets all the attributes that have been set on the given object. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttributes (bool includeUnset)
	Gets all the attributes of the given object. More...

unsafe NXOpen.NXObject.AttributeInformation[]	GetUserAttributes (bool includeUnset, bool addStringValues)
	Gets all the attributes of the given object. More...

unsafe string[]	GetUserAttributesAsStrings ()
	Gets all the attributes that have been set on the given object. More...

unsafe int	GetUserAttributeSize (string title, NXOpen.NXObject.AttributeType type)
	Gets the size of the first attribute encountered on the object, if any, with a given Title and Type. More...

unsafe NXOpen.NXObject[]	GetUserAttributeSourceObjects ()
	Returns an array of objects from which this object presents attributes. More...

unsafe bool	HasUserAttribute (NXOpen.AttributeIterator iterator)
	Determines if an attribute exists on the object, that satisfies the given iterator More...

unsafe bool	HasUserAttribute (string title, NXOpen.NXObject.AttributeType type, int index)
	Determines if an attribute with the given Title, Type and array Index is present on the object Unset attributes will not be detected by this function, as its purpose is to test for the actual presence of the attribute on the object. More...

unsafe void	Print ()
	Prints a representation of this object to the system log file. More...

unsafe void	SetAttribute (string title, int value)
	Creates or modifies an integer attribute. More...

unsafe void	SetAttribute (string title, int value, NXOpen.Update.Option option)
	Creates or modifies an integer attribute with the option to update or not. More...

unsafe void	SetAttribute (string title, double value)
	Creates or modifies a real attribute. More...

unsafe void	SetAttribute (string title, double value, NXOpen.Update.Option option)
	Creates or modifies a real attribute with the option to update or not. More...

unsafe void	SetAttribute (string title, string value)
	Creates or modifies a string attribute. More...

unsafe void	SetAttribute (string title, string value, NXOpen.Update.Option option)
	Creates or modifies a string attribute with the option to update or not. More...

unsafe void	SetAttribute (string title)
	Creates or modifies a null attribute which is an attribute with a title and no value. More...

unsafe void	SetAttribute (string title, NXOpen.Update.Option option)
	Creates or modifies a null attribute with the option to update or not. More...

unsafe void	SetBooleanUserAttribute (string title, int index, bool value, NXOpen.Update.Option option)
	Creates or modifies a boolean attribute with the option to update or not. More...

unsafe void	SetName (string name)
	Sets the custom name of the object. More...

unsafe void	SetPdmReferenceAttribute (string attributeTitle, string attributeValue)
	Sets the value of PDM Reference attribute on the object. More...

unsafe void	SetReferenceAttribute (string title, string value)
	Creates or modifies a string attribute which uses a reference string. More...

unsafe void	SetReferenceAttribute (string title, string value, NXOpen.Update.Option option)
	Creates or modifies a string attribute which uses a reference string, with the option to update or not. More...

unsafe void	SetTimeAttribute (string title, string value)
	Creates or modifies a time attribute. More...

unsafe void	SetTimeAttribute (string title, string value, NXOpen.Update.Option option)
	Creates or modifies a time attribute with the option to update or not. More...

unsafe void	SetTimeUserAttribute (string title, int index, string value, NXOpen.Update.Option option)
	Creates or modifies a time attribute with the option to update or not. More...

unsafe void	SetTimeUserAttribute (string title, int index, NXOpen.NXObject.ComputationalTime value, NXOpen.Update.Option option)
	Creates or modifies a time attribute with the option to update or not. More...

unsafe void	SetUserAttribute (NXOpen.NXObject.AttributeInformation info, NXOpen.Update.Option option)
	Creates or modifies an attribute with the option to update or not. More...

unsafe void	SetUserAttribute (string title, int index, int value, NXOpen.Update.Option option)
	Creates or modifies an integer attribute with the option to update or not. More...

unsafe void	SetUserAttribute (string title, int index, double value, NXOpen.Update.Option option)
	Creates or modifies a real attribute with the option to update or not. More...

unsafe void	SetUserAttribute (string title, int index, string value, NXOpen.Update.Option option)
	Creates or modifies a string attribute with the option to update or not. More...

unsafe void	SetUserAttribute (string title, int index, NXOpen.Update.Option option)
	Creates or modifies a null attribute with the option to update or not. More...

unsafe void	SetUserAttributeLock (string title, NXOpen.NXObject.AttributeType type, bool @lock)
	Lock or unlock the given attribute. More...

Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...

void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...

override string	ToString ()
	Returns a String that represents the current Object. More...

Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...

IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
NXOpen.CAM.NCGroupCollection	CAMGroupCollection `[get]`
	Returns the NCGroupCollection instance belonging to this setup More...

NXOpen.CAM.OperationCollection	CAMOperationCollection `[get]`
	Returns the OperationCollection instance belonging to this setup More...

unsafe bool	IsLibrarySetup `[get]`
	Returns the flag indicating if this setup is initialized from a library. More...

unsafe string	LibraryReference `[get, set]`
	Returns or sets the template library reference More...

unsafe bool	OutputBallCenter `[get, set]`
	Returns or sets the setting for ball center output at posting time More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

cam setup

To obtain an instance of this class, use NXOpen.Part.CAMSetup

Created in NX4.0.0

Member Enumeration Documentation

enum NXOpen.CAM.CAMSetup.OutputUnits

Output units used in output clsf and postprocess.

Enumerator
Inch	use inch as output unit
Metric	use metric as output unit
PostDefined	use post defined unit as output unit

enum NXOpen.CAM.CAMSetup.Paste

Paste position.

Enumerator
Before	paste before
Inside	paste inside
After	paste after

enum NXOpen.CAM.CAMSetup.PostprocessSettingsOutputWarning

Output warning setting for Postprocess

Enumerator
Yes	output the warning file
No	not output the warning file
PostDefined	use post defined setting

enum NXOpen.CAM.CAMSetup.PostprocessSettingsPostMode

post mode setting for Postprocess

Enumerator
Normal	normal postprocessing mode
AdvancedAuto	Regenenrate post data as require
AdvancedRegenerate	Force regenerate post data
AdvancedReuse	Reuse post data if the operation has it

enum NXOpen.CAM.CAMSetup.PostprocessSettingsReviewTool

Review tool setting for Postprocess

Enumerator
On	show the review tool window
Off	not show the review tool window
PostDefined	use post defined setting

enum NXOpen.CAM.CAMSetup.Ude

The UDE type

Enumerator
Start	start UDE
End	end UDE

enum NXOpen.CAM.CAMSetup.View

ONT view.

Enumerator
ProgramOrder	program order
MachineMethod	machine method
Geometry	geometry
MachineTool	machine tool

Member Function Documentation

unsafe int [] NXOpen.CAM.CAMSetup.ApplyRoboticRules	(	NXOpen.CAM.CAMObject[]	pOperations,
		bool	askForValidation,
		bool	doNotShowSuccessMessages
	)

inline

Apply Robotic rules to a list of operations

Created in NX1847.0.0

License requirements: None.

Parameters

pOperations	List of Operations to Apply Rules To
askForValidation
doNotShowSuccessMessages

Returns: the views on window device

unsafe void NXOpen.CAM.CAMSetup.ApproveObjects ( NXOpen.CAM.CAMObject[] objects )

inline

Approve objects

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.BufferObjects	(	NXOpen.CAM.CAMSetup.View	view,
		NXOpen.CAM.CAMObject[]	objectsToBeBuffered
	)

inline

Buffer objects to the clipboard and prepare for copy later

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

view	view
objectsToBeBuffered	array of objects to be buffered

unsafe void NXOpen.CAM.CAMSetup.CopyFromComponent ( )

inline

Copy From Component.

Created in NX11.0.1

License requirements: cam_base ("CAM BASE")

unsafe NXOpen.CAM.CAMObject [] NXOpen.CAM.CAMSetup.CopyObjects	(	NXOpen.CAM.CAMSetup.View	view,
		NXOpen.CAM.CAMObject[]	objectsToBeMoved,
		NXOpen.CAM.CAMObject	destinationObject,
		NXOpen.CAM.CAMSetup.Paste	pastePosition
	)

inline

Copy objects

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

view	view
objectsToBeMoved	array of objects to be moved
destinationObject	the destination object
pastePosition	paste inside or after the destination object

Returns: array of new objects

unsafe NXOpen.CAM.CAMObject [] NXOpen.CAM.CAMSetup.CopyObjectsWithReference	(	NXOpen.CAM.CAMSetup.View	view,
		NXOpen.CAM.CAMObject[]	objectsToBeMoved,
		NXOpen.CAM.CAMObject	destinationObject,
		NXOpen.CAM.CAMSetup.Paste	pastePosition
	)

inline

Copy objects with reference

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

Parameters

view	view
objectsToBeMoved	array of objects to be moved
destinationObject	the destination object
pastePosition	paste inside or after the destination object

Returns: array of new objects

unsafe NXOpen.CAM.CutDepthChecker NXOpen.CAM.CAMSetup.CreateCutDepthChecker ( )

inline

Creates a Cut Depth Checker.

Note: Commit will not return an object

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

Returns: the cut depth checker object

unsafe NXOpen.CAM.MirrorBuilder NXOpen.CAM.CAMSetup.CreateEditMirrorBuilder ( NXOpen.CAM.CAMObject[] objectsToMirror )

inline

Create edit mirror builder.

Created in NX12.0.1

License requirements: cam_base ("CAM BASE")

Parameters

objectsToMirror array of objects to mirror

Returns: created Mirror Builder

unsafe NXOpen.CAM.FeatureProcessBuilder NXOpen.CAM.CAMSetup.CreateFeatureProcessBuilder ( )

inline

Creates a CAM.

FeatureProcessBuilder

Created in NX7.5.0

License requirements: ug_holemaking ("UG Holemaking")

Returns

unsafe NXOpen.CAM.FeatureRecognitionBuilder NXOpen.CAM.CAMSetup.CreateFeatureRecognitionBuilder ( NXOpen.CAM.CAMObject param )

inline

Creates a CAM.

FeatureRecognitionBuilder

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

param not used

Returns

unsafe NXOpen.CAM.FeatureTeaching NXOpen.CAM.CAMSetup.CreateFeatureTeaching ( NXOpen.CAM.CAMObject param )

inline

Creates a CAM.

FeatureTeaching

Created in NX8.0.0

License requirements: cam_base ("CAM BASE")

Parameters

param not used

Returns

unsafe NXOpen.CAM.ObjectsFeedsBuilder NXOpen.CAM.CAMSetup.CreateFeedsBuilder ( NXOpen.CAM.CAMObject @[] params )

inline

Create Feeds builder.

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

params array of objects

Returns: created object feed builder

unsafe NXOpen.CAM.FeedsOptimizeBuilder NXOpen.CAM.CAMSetup.CreateFeedsOptimizeBuilder ( NXOpen.CAM.CAMObject param )

inline

Creates a feeds optimize builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

param the object to be edited

Returns: feeds optimize builder created

unsafe NXOpen.CAM.GougeCheckBuilder NXOpen.CAM.CAMSetup.CreateGougeCheckBuilder ( NXOpen.CAM.CAMObject[] objects )

inline

Create Gouge Check builder.

Created in NX11.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

Returns: created Gouge Check Builder

unsafe NXOpen.CAM.MirrorBuilder NXOpen.CAM.CAMSetup.CreateMirrorBuilder ( NXOpen.CAM.CAMObject[] objectsToMirror )

inline

Create Mirror builder.

Created in NX9.0.3

License requirements: cam_base ("CAM BASE")

Parameters

objectsToMirror array of objects to mirror

Returns: created Mirror Builder

unsafe NXOpen.CAM.NCAssistantBuilder NXOpen.CAM.CAMSetup.CreateNCAssistantBuilder ( )

inline

Creates NC Assistant builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Returns: NC Assistant builder created

unsafe NXOpen.CAM.NcmctPartMountingBuilder NXOpen.CAM.CAMSetup.CreateNcmctPartMountingBuilder ( string libRef )

inline

Creates a Part Mounting Builder.

Note: Commit a Part Mounting Builder will perform the Part Mounting and no object is returned.

Created in NX8.0.0

License requirements: cam_base ("CAM BASE")

Parameters

libRef a unique library reference identifier

Returns: part mounting builder created

unsafe NXOpen.CAM.ObjectNotes NXOpen.CAM.CAMSetup.CreateObjectNotes ( NXOpen.CAM.CAMObject opr )

inline

Create Notes.

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

Parameters

opr

Returns: created object notes

unsafe NXOpen.CAM.ObjectsUdeSet NXOpen.CAM.CAMSetup.CreateObjectsUdeSet	(	NXOpen.CAM.CAMObject @[]	params,
		NXOpen.CAM.CAMSetup.Ude	udeType
	)

inline

Create ObjectsUdeSet.

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

params	array of operations or groups
udeType	ude type

Returns: created objects ude set

unsafe NXOpen.CAM.ObjectsUdeSet NXOpen.CAM.CAMSetup.CreateObjectsUdeSet	(	NXOpen.CAM.CAMObject @[]	params,
		NXOpen.CAM.CAMSetup.Ude	udeType,
		NXOpen.CAM.CAMFeature[]	features
	)

inline

Create ObjectsUdeSet for features

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

params	array of operations
udeType	ude type
features	array of features

Returns: created objects ude set

unsafe NXOpen.CAM.ObjectWorkInstructionBuilder NXOpen.CAM.CAMSetup.CreateObjectWorkInstructionBuilder ( NXOpen.CAM.CAMObject param )

inline

Create Object Work Instruction builder for authoring Work Instructions.

Created in NX9.0.3

License requirements: cam_base ("CAM BASE")

Parameters

param

Returns: created builder object

unsafe NXOpen.CAM.OperationTeaching NXOpen.CAM.CAMSetup.CreateOperationTeaching ( NXOpen.CAM.CAMObject param )

inline

Creates a CAM.

OperationTeaching

Created in NX8.0.0

License requirements: cam_base ("CAM BASE")

Parameters

param not used

Returns

unsafe NXOpen.CAM.OperationTransformBuilder NXOpen.CAM.CAMSetup.CreateOperationTransformBuilder ( NXOpen.CAM.CAMObject[] objectsToTransform )

inline

Create Transform builder.

Note: Commit a Transform Builder will apply a transformation.

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objectsToTransform array of objects to transform

Returns: created Transform Builder

unsafe NXOpen.CAM.PreprocessGeometryBuilder NXOpen.CAM.CAMSetup.CreatePreprocessGeometryBuilder ( )

inline

Creates a preprocess geometry builder

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Returns: preprocess geometry builder created

unsafe NXOpen.CAM.SurfaceRegions NXOpen.CAM.CAMSetup.CreateSurfaceRegions ( NXOpen.Features.Feature feature )

inline

Creates a surface regions builder

Created in NX8.0.0

License requirements: cam_base ("CAM BASE")

Parameters

feature Feature to be edited

Returns: surface regions builder created

unsafe NXOpen.CAM.ToolPathDivideBuilder NXOpen.CAM.CAMSetup.CreateToolPathDivideBuilder ( NXOpen.CAM.CAMObject[] tpObjectsToDivide )

inline

Create Tool Path Divide builder

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

tpObjectsToDivide array of objects to divide

Returns: array of new objects

unsafe NXOpen.CAM.ToolPathSplitBuilder NXOpen.CAM.CAMSetup.CreateToolPathSplitBuilder ( NXOpen.CAM.CAMObject[] tpObjectsToDivide )

inline

Create Tool Path Split by Holder builder

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

tpObjectsToDivide array of objects to divide

Returns: array of new objects

unsafe NXOpen.CAM.ToolPathTiltBuilder NXOpen.CAM.CAMSetup.CreateToolPathTiltBuilder ( NXOpen.CAM.CAMObject[] tpObjectsToTilt )

inline

Create Tool Path Tilt builder

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

tpObjectsToTilt array of objects to tilt

Returns: array of new objects

unsafe NXOpen.CAM.WorkInstructionBuilder NXOpen.CAM.CAMSetup.CreateWorkInstructionBuilder ( NXOpen.CAM.CAMObject param )

inline

Create Work Instruction builder for authoring Work Instructions.

Created in NX9.0.3

License requirements: cam_base ("CAM BASE")

Parameters

param

Returns: created builder object

unsafe NXOpen.CAM.WorkInstructionOutputBuilder NXOpen.CAM.CAMSetup.CreateWorkInstructionOutputBuilder ( )

inline

Create Work Instruction Output builder for publishing Work Instructions.

Created in NX9.0.3

License requirements: cam_base ("CAM BASE")

Returns: created builder object

unsafe void NXOpen.CAM.CAMSetup.CustomizationUpdateFromObject	(	NXOpen.CAM.CAMObject	destinationObject,
		NXOpen.CAM.CAMObject	sourceObject
	)

inline

Customize from Object

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

destinationObject	destination object for customization
sourceObject	source object for customization

unsafe void NXOpen.CAM.CAMSetup.CustomizationUpdateFromTemplate ( NXOpen.CAM.CAMObject[] objects )

inline

Customize from Template

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

objects destination objects for customization

unsafe void NXOpen.CAM.CAMSetup.CutObjects	(	NXOpen.CAM.CAMSetup.View	view,
		NXOpen.CAM.CAMObject[]	objectsToBeMoved
	)

inline

Cut objects

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

view	view
objectsToBeMoved	array of objects to be moved

unsafe void NXOpen.CAM.CAMSetup.Delete3dWorkpieces ( NXOpen.CAM.CAMObject[] objects )

inline

Delete 3D workpieces of the selected operations

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of operations

unsafe void NXOpen.CAM.CAMSetup.DeleteToolPath ( NXOpen.CAM.CAMObject[] objects )

inline

Delete tool path

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.DeleteVnckMachineData ( )

inline

Removes vnck machine data

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

unsafe void NXOpen.CAM.CAMSetup.DeleteWorkInstructions ( NXOpen.CAM.CAMObject[] objects )

inline

Delete Work Instructions

Created in NX9.0.3

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.DivideToolPaths	(	NXOpen.CAM.CAMObject[]	objects,
		NXOpen.CAM.ToolPathDivideBuilder	builder
	)

inline

Tool Path Divide

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects
builder	builder containing split parameters

unsafe void NXOpen.CAM.CAMSetup.GenerateToolPath ( NXOpen.CAM.CAMObject[] objects )

inline

Generate tool path

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe NXOpen.CAM.CAMObject NXOpen.CAM.CAMSetup.GetCamExitObject ( )

inline

Get the param object which is invoking the exit API

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

Returns: the cam exit object

unsafe string NXOpen.CAM.CAMSetup.GetMachineLibref ( )

inline

Get machine libref

Created in NX8.5.0

License requirements: None.

Returns

unsafe string NXOpen.CAM.CAMSetup.GetPartMaterial ( )

inline

Part material

Created in NX8.0.1

License requirements: None.

Returns

unsafe void NXOpen.CAM.CAMSetup.GetPartMaterialData	(	out string	libref,
		out string	name,
		out string	description,
		out string	code,
		out string	hardness
	)

inline

Get part material data

Created in NX8.0.2

License requirements: None.

Parameters

libref
name
description
code
hardness

unsafe NXOpen.CAM.NCGroup NXOpen.CAM.CAMSetup.GetRoot ( NXOpen.CAM.CAMSetup.View branch )

inline

Get root of the specified branch.

Created in NX7.5.0

License requirements: None.

Parameters

branch branch from which to get setup root

Returns: root of the specified branch

unsafe void NXOpen.CAM.CAMSetup.GougeCheck	(	NXOpen.CAM.CAMObject[]	objects,
		bool	checkForHolderCollision
	)

inline

Gouge Check

Created in NX6.0.0

Deprecated in NX9.0.0. Use new version with additional arguments instead.

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects to do gouge checking
checkForHolderCollision	check for tool holder collision

unsafe void NXOpen.CAM.CAMSetup.GougeCheck	(	NXOpen.CAM.CAMObject[]	objects,
		bool	checkForHolderCollision,
		bool	useParametric,
		bool	useUserdefStock,
		double	userdefStock
	)

inline

Gouge Check

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects to do gouge checking
checkForHolderCollision	check for tool holder collision
useParametric	use parametric tool shape
useUserdefStock	use user defined stock
userdefStock	user defined stock

unsafe bool NXOpen.CAM.CAMSetup.HasSuppressedGeom ( NXOpen.CAM.CAMObject param )

inline

Check for suppressed geometry

Created in NX5.0.4

License requirements: cam_base ("CAM BASE")

Parameters

param object to test

Returns

unsafe bool NXOpen.CAM.CAMSetup.IsGroup ( NXOpen.CAM.CAMObject camObject )

inline

Check if the specified object is a group.

Created in NX7.5.0

License requirements: None.

Parameters

camObject

Returns

unsafe bool NXOpen.CAM.CAMSetup.IsOperation ( NXOpen.CAM.CAMObject camobject )

inline

Check if the specified object is an operation.

Created in NX7.5.0

License requirements: None.

Parameters

camobject

Returns

unsafe bool NXOpen.CAM.CAMSetup.IsToolPathLocked ( NXOpen.CAM.CAMObject @ object )

inline

Lock Tool Path

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

object object whose tool path is checked

Returns: tool path lock status

unsafe void NXOpen.CAM.CAMSetup.ListToolPath ( NXOpen.CAM.CAMObject[] objects )

inline

List tool path

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.LockToolPaths	(	NXOpen.CAM.CAMObject[]	objects,
		bool @	lock
	)

inline

Lock Tool Path

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects
lock	lock the tool path if true, else unlock the tool path

unsafe void NXOpen.CAM.CAMSetup.MinToolLen ( NXOpen.CAM.CAMObject[] objects )

inline

Minimum tool length

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.MoveObjects	(	NXOpen.CAM.CAMSetup.View	view,
		NXOpen.CAM.CAMObject[]	objectsToBeMoved,
		NXOpen.CAM.CAMObject	destinationObject,
		NXOpen.CAM.CAMSetup.Paste	pastePosition
	)

inline

Move objects

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

view	view
objectsToBeMoved	array of objects to be moved
destinationObject	the destination object
pastePosition	paste inside or after the destination object

unsafe void NXOpen.CAM.CAMSetup.Optimize	(	NXOpen.CAM.CAMObject[]	objects,
		bool	consolidateTools,
		bool	minimizeToolChanges,
		bool	createOptimizationGroup
	)

inline

Optimize

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects to optimize
consolidateTools	consolidate tools
minimizeToolChanges	minimize tool changes
createOptimizationGroup	create optimization group

unsafe void NXOpen.CAM.CAMSetup.OutputClsf	(	NXOpen.CAM.CAMObject[]	objects,
		string	clsfFormat,
		string	outfileName,
		NXOpen.CAM.CAMSetup.OutputUnits	outputUnits
	)

inline

Output CLSF

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects
clsfFormat	clsf format
outfileName	output file name
outputUnits	output file unit

unsafe void NXOpen.CAM.CAMSetup.ParallelCreate3d ( NXOpen.CAM.CAMObject[] objects )

inline

Parallel create 3D

Created in NX9.0.1

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.ParallelGenerate ( NXOpen.CAM.CAMObject[] objects )

inline

Parallel Generate tool path

Created in NX7.5.5

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.Postprocess	(	NXOpen.CAM.CAMObject[]	objects,
		string	machineType,
		string	outfileName,
		NXOpen.CAM.CAMSetup.OutputUnits	outputUnits
	)

inline

Postprocess

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects
machineType	machine type
outfileName	output file name
outputUnits	output file unit

unsafe void NXOpen.CAM.CAMSetup.PostprocessMultichannel	(	NXOpen.CAM.CAMObject[]	objects,
		string	outfileName
	)

inline

Postprocess multichannel machine without triggering synch manager

Created in NX1872.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	List of synch groups to be postprocessed, currently only the first group would be processed
outfileName	Output file name

unsafe void NXOpen.CAM.CAMSetup.PostprocessWithSetting	(	NXOpen.CAM.CAMObject[]	objects,
		string	machineType,
		string	outfileName,
		NXOpen.CAM.CAMSetup.OutputUnits	outputUnits,
		NXOpen.CAM.CAMSetup.PostprocessSettingsOutputWarning	outputWarning,
		NXOpen.CAM.CAMSetup.PostprocessSettingsReviewTool	reviewTool
	)

inline

Postprocess

Created in NX8.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects
machineType	machine type
outfileName	output file name
outputUnits	output file unit
outputWarning	whether ouput warning file
reviewTool	whether active review tool window

unsafe void NXOpen.CAM.CAMSetup.RemoveDependencies ( NXOpen.CAM.CAMObject[] objects )

inline

Remove dependencies of selected objects

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.RemoveMachine ( )

inline

Removes:

The machine part component from the CAM assembly
The machine kinematics from the CAM Setup
Carriers and Pockets from the CAM Setup, this means cleanup the Operation Navigator

Created in NX8.5.0

License requirements: cam_base ("CAM BASE")

unsafe void NXOpen.CAM.CAMSetup.RemoveSuppressedGeom ( NXOpen.CAM.CAMObject param )

inline

Remove suppressed geometry

Created in NX5.0.4

License requirements: cam_base ("CAM BASE")

Parameters

param object to operate on

unsafe void NXOpen.CAM.CAMSetup.ReplayToolPath ( NXOpen.CAM.CAMObject[] objects )

inline

Replay tool path

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.RestoreDependencies ( NXOpen.CAM.CAMObject[] objects )

inline

Restore dependencies of selected objects

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe NXOpen.CAM.NCGroup NXOpen.CAM.CAMSetup.RetrieveDevice ( string libRef )

inline

Retrieve a device from library

Created in NX8.0.0

License requirements: None.

Parameters

libRef a unique library reference identifier

Returns: machine device created

unsafe NXOpen.CAM.Tool NXOpen.CAM.CAMSetup.RetrieveTool	(	string	libRef,
		out bool	success
	)

inline

Retrieve a tool from library

Created in NX7.5.0

License requirements: None.

Parameters

libRef the library name

Returns: created the tool library

Parameters

success

unsafe NXOpen.CAM.Tool NXOpen.CAM.CAMSetup.RetrieveTool	(	string	libRef,
		NXOpen.CAM.CAMObject	target,
		out NXOpen.CAM.CAMObject	nextTarget,
		out bool	success
	)

inline

Retrieve a tool from library to the target

Created in NX8.5.0

License requirements: None.

Parameters

libRef	the library name
target	the target where the tool is mounted
nextTarget	the next target where the tool can be mounted

Returns: created the tool library

Parameters

success

unsafe NXOpen.CAM.CAMObject.ErrorItem [] NXOpen.CAM.CAMSetup.SetMachiningData ( NXOpen.CAM.CAMObject[] objects )

inline

Set Machining Data

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

Returns: array of errors

unsafe void NXOpen.CAM.CAMSetup.SetPartMaterial ( string libRef )

inline

Part material

Created in NX8.0.1

License requirements: cam_base ("CAM BASE")

Parameters

libRef

unsafe void NXOpen.CAM.CAMSetup.SetTemplateStatus	(	NXOpen.CAM.CAMObject[]	objects,
		bool	useAsParent,
		bool	createIfParentCreated
	)

inline

Set Template status

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects to adjust
useAsParent	object can be used as a template or not
createIfParentCreated	create if parent is created

unsafe void NXOpen.CAM.CAMSetup.Show2dWorkpiece ( NXOpen.CAM.CAMObject[] objects )

inline

Show 2D workpiece

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.Show2dWorkpieceIn ( NXOpen.CAM.CAMObject[] objects )

inline

Show ingoing 2D workpiece

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.Show2dWorkpieceOut ( NXOpen.CAM.CAMObject[] objects )

inline

Show outgoing 2D workpiece

Created in NX5.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.Show3dWorkpiece ( NXOpen.CAM.CAMObject[] objects )

inline

Show 3D workpiece

Created in NX4.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.ShowSpinning3dWorkpiece ( NXOpen.CAM.CAMObject[] objects )

inline

Show spinning 3D workpiece

Created in NX9.0.1

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.SplitToolPaths	(	NXOpen.CAM.CAMObject[]	objects,
		NXOpen.CAM.ToolPathSplitBuilder	builder
	)

inline

Tool Path Split by Holder

Created in NX6.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects
builder	builder containing split parameters

unsafe void NXOpen.CAM.CAMSetup.SwitchLayerLayout ( NXOpen.CAM.CAMObject @ object )

inline

Switch Layer and Layout

Created in NX9.0.1

License requirements: cam_base ("CAM BASE")

Parameters

object the object for which the layer and layout has to be switched

unsafe void NXOpen.CAM.CAMSetup.TiltToolPaths	(	NXOpen.CAM.CAMObject[]	objects,
		NXOpen.CAM.ToolPathTiltBuilder	builder
	)

inline

Tool Path Tilt

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

objects	array of objects
builder	builder containing tilt parameters

unsafe void NXOpen.CAM.CAMSetup.TrimToolPath ( NXOpen.CAM.OperationBuilder operationBuilder )

inline

Interactive Tool Path Trim

Created in NX9.0.3

License requirements: cam_base ("CAM BASE")

Parameters

operationBuilder

unsafe void NXOpen.CAM.CAMSetup.UnapproveObjects ( NXOpen.CAM.CAMObject[] objects )

inline

Unapprove objects

Created in NX7.5.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe void NXOpen.CAM.CAMSetup.UpdateGeometryDependencies ( NXOpen.CAM.CAMObject[] objects )

inline

Update geometry dependencies of selected objects

Created in NX9.0.0

License requirements: cam_base ("CAM BASE")

Parameters

objects array of objects

unsafe bool NXOpen.CAM.CAMSetup.UpdateResourcesOnRule ( )

inline

Update Resources (Machine, Tools, Devices) based on assembly loading rule

Created in NX10.0.3

License requirements: None.

Returns: return whether CAM ressources have been modified or not

unsafe void NXOpen.CAM.CAMSetup.ValidateRoboticPaths	(	NXOpen.CAM.CAMObject[]	pOperations,
		bool	checkForCollisions,
		bool	displayFindings
	)

inline

Validate the robotic paths

Created in NX1847.0.0

License requirements: None.

Parameters

pOperations	List of Operations to validate paths
checkForCollisions
displayFindings

Property Documentation

NXOpen.CAM.NCGroupCollection NXOpen.CAM.CAMSetup.CAMGroupCollection

get

Returns the NCGroupCollection instance belonging to this setup

Created in NX3.0.0

NXOpen.CAM.OperationCollection NXOpen.CAM.CAMSetup.CAMOperationCollection

get

Returns the OperationCollection instance belonging to this setup

Created in NX3.0.0

unsafe bool NXOpen.CAM.CAMSetup.IsLibrarySetup

get

Returns the flag indicating if this setup is initialized from a library.

Created in NX7.5.3

License requirements: None.

unsafe string NXOpen.CAM.CAMSetup.LibraryReference

getset

Returns or sets the template library reference

Created in NX7.5.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.CAMSetup.OutputBallCenter

getset

Returns or sets the setting for ball center output at posting time

Created in NX9.0.1

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_CAMSetup.cs

Public Types

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

Member Function Documentation

Property Documentation