NXOpen.CAM.Preferences Class Reference

Represents a cam preferences Builder More...

Inheritance diagram for NXOpen.CAM.Preferences:

Public Types
enum	AnimationAccuracyTypes { Fine, Coarse }
	the animation accuracy types More...
enum	AuxiliaryFloorColorSelectionTypes { Bodies, Faces, SurfaceRegion }
	the auxiliary floor selection types. More...
enum	BlankSelectionTypes {   Bodies, Faces, Curves, SurfaceRegion,   FacetedBodies }
	the blank selection types. More...
enum	CheckSelectionTypes { Bodies, Faces, Curves }
	the check selection types. More...
enum	CsysInformationListingTypes { Wcs, Mcs }
	the information listing types More...
enum	CutAreaSelectionTypes { Bodies, Faces, SurfaceRegion }
	the cut area selection types. More...
enum	GeometryTypes {   Part, Blank, Check, CutArea,   AuxiliaryFloor, Walls, SurfaceAreaDrive }
	the geometry types More...
enum	IpwDmrColoringTypes { Off, PerTool, PerOperation, ToolDefined }
	the IPW material removal coloring types More...
enum	IpwToleranceModeTypes { NeedleDistance, NeedleCount }
	the IPW tolerance modes More...
enum	PartSelectionTypes {   Bodies, Faces, Curves, SurfaceRegion,   FacetedBodies }
	the part selection types. More...
enum	SelectionTypes {   NoSelectionFilter, Curves, Edges, Faces,   Feature, SolidBodies, SheetBodies, FacetBodies,   Groups, SurfaceRegionFeatures }
	the selection types More...
enum	WallSelectionTypes { Bodies, Faces, SurfaceRegion }
	the wall selection types. More...

Public Member Functions
unsafe string	GetDefaultConfigurationFile ()
	Get the default configuration file More...
unsafe string	GetDefaultIpwFolder ()
	Get the ipw default folder More...
unsafe string	GetDefaultTemplateFile ()
	Get the default template file More...
unsafe NXOpen.CAM.Preferences.SelectionTypes	GetSelection (NXOpen.CAM.Preferences.GeometryTypes geomType)
	The geometry selection type method More...
unsafe void	SetSelection (NXOpen.CAM.Preferences.GeometryTypes geomType, NXOpen.CAM.Preferences.SelectionTypes selection)
	The geometry selection type method More...
Public Member Functions inherited from NXOpen.Builder
unsafe NXOpen.NXObject	Commit ()
	Commits any edits that have been applied to the builder. More...
unsafe void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...
unsafe NXOpen.NXObject[]	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...
unsafe NXOpen.NXObject	GetObject ()
	Returns the object currently being edited by this builder. More...
unsafe void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...
unsafe bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...
Public Member Functions inherited from NXOpen.TaggedObject
void	PrintTestData (String variableName)
	<exclude> More...
void	PrintTestData (String variableName, int lineNumber)
	<exclude> More...
override string	ToString ()
	Returns a String that represents the current Object. More...
Public Member Functions inherited from NXOpen.Utilities.NXRemotableObject
IMessageCtrl	AsyncProcessMessage (IMessage msg, IMessageSink replySink)
	Asynchronously processes the given message. More...
IMessage	SyncProcessMessage (IMessage msg)
	Synchronously processes the given message. More...

Properties
unsafe bool	AlwaysUpdateDialogs [get, set]
	Returns or sets the auto update dialog More...
unsafe bool	AutomaticallySetMachingData [get, set]
	Returns or sets the auto maching data More...
unsafe NXOpen.NXColor	AuxiliaryFloorColor [get, set]
	Returns or sets the auxiliary floor More...
unsafe NXOpen.CAM.Preferences.AuxiliaryFloorColorSelectionTypes	AuxiliaryFloorColorSelection [get, set]
	Returns or sets the auxiliary floor selection. More...
unsafe NXOpen.NXColor	BladeBlendColor [get, set]
	Returns or sets the blade blend color More...
unsafe NXOpen.NXColor	BladeColor [get, set]
	Returns or sets the blade color More...
unsafe NXOpen.NXColor	BlankColor [get, set]
	Returns or sets the blank color More...
unsafe NXOpen.CAM.Preferences.BlankSelectionTypes	BlankSelection [get, set]
	Returns or sets the blank selection. More...
unsafe NXOpen.NXColor	CheckColor [get, set]
	Returns or sets the check color More...
unsafe NXOpen.CAM.Preferences.CheckSelectionTypes	CheckSelection [get, set]
	Returns or sets the check selection. More...
unsafe NXOpen.NXColor	ClearanceColor [get, set]
	Returns or sets the clearance color More...
unsafe int	ClsfDecimals [get, set]
	Returns or sets the clsf_decimals More...
unsafe bool	ClsfForceLoadTurret [get, set]
	Returns or sets the force load turret More...
unsafe string	ConfigurationFile [get, set]
	Returns or sets the configuration file More...
unsafe NXOpen.CAM.Preferences.CsysInformationListingTypes	CsysInformationListing [get, set]
	Returns or sets the base info More...
unsafe bool	CsysOrientWcsToMcs [get, set]
	Returns or sets the orient wcs to mcs More...
unsafe NXOpen.NXColor	CutAreaColor [get, set]
	Returns or sets the cut area color More...
unsafe NXOpen.CAM.Preferences.CutAreaSelectionTypes	CutAreaSelection [get, set]
	Returns or sets the cut area selection. More...
unsafe bool	DisplaySelectedObjects [get, set]
	Returns or sets the display selected objects More...
unsafe bool	DisplayTurningIpw [get, set]
	Returns or sets the display turning ipw More...
unsafe NXOpen.NXColor	DriveColor [get, set]
	Returns or sets the drive color More...
unsafe bool	EnableLevelBasedIpw [get, set]
	Returns or sets the enable level based ipw More...
unsafe double	FeatureRecognitionLenDiaRatio [get, set]
	Returns or sets the feature recognition length diameter ratio More...
unsafe bool	ForceRegenerate [get, set]
	Returns or sets the force regenerate More...
unsafe bool	GeneratePaths [get, set]
	Returns or sets the generate tool paths More...
unsafe bool	GenerationFullRegeneration [get, set]
	Returns or sets the full regeneration More...
unsafe bool	GenerationPauseAfterEachPath [get, set]
	Returns or sets the pause after each path More...
unsafe bool	GenerationRefreshBeforeEachPath [get, set]
	Returns or sets the refresh before each path More...
unsafe bool	GenerationSmartRegeneration [get, set]
	Returns or sets the smart regeneration More...
unsafe bool	GenerationUpdateInstances [get, set]
	Returns or sets the update all instances More...
unsafe NXOpen.NXColor	HubColor [get, set]
	Returns or sets the hub color More...
unsafe bool	IncludeInstances [get, set]
	Returns or sets the include instances More...
unsafe int	IpwNeedleCountCoarse [get, set]
	Returns or sets the coarse ipw needle count More...
unsafe int	IpwNeedleCountFine [get, set]
	Returns or sets the fine ipw needle count More...
unsafe int	IpwNeedleCountMedium [get, set]
	Returns or sets the medium ipw needle count More...
unsafe double	IpwNeedleDistanceCoarse [get, set]
	Returns or sets the coarse ipw needle distance More...
unsafe double	IpwNeedleDistanceFine [get, set]
	Returns or sets the fine ipw needle distance More...
unsafe double	IpwNeedleDistanceMedium [get, set]
	Returns or sets the medium ipw needle distance More...
unsafe string	IpwPartsFolder [get, set]
	Returns or sets the ipw parts folder More...
unsafe NXOpen.CAM.Preferences.IpwToleranceModeTypes	IpwToleranceMode [get, set]
	Returns or sets the ipw tolerance mode More...
unsafe bool	IpwUseDirectoryOfOriginalPart [get, set]
	Returns or sets the use directory original part More...
unsafe bool	LinkMcsRcs [get, set]
	Returns or sets the link mcs rcs More...
unsafe NXOpen.NXColor	OptimizedCutLevelColor [get, set]
	Returns or sets the optimized cut level More...
unsafe NXOpen.NXColor	PartColor [get, set]
	Returns or sets the part color More...
unsafe NXOpen.CAM.Preferences.PartSelectionTypes	PartSelection [get, set]
	Returns or sets the part selection. More...
unsafe bool	RelocateParameters [get, set]
	Returns or sets the relocate parameters More...
unsafe bool	ReplayRefreshBeforeEachPath [get, set]
	Returns or sets the refresh before each path replay More...
unsafe bool	RunProcessAssistant [get, set]
	Returns or sets the process assistant More...
unsafe double	SaveIpwAfterCuttingLength [get, set]
	Returns or sets the cutting length threshold that controls when an IPW will be saved More...
unsafe bool	SaveIpwModel [get, set]
	Returns or sets the ipw model More...
unsafe bool	SaveLevelBasedIpw [get, set]
	Returns or sets the level based ipw More...
unsafe int	ScrollAreaSize [get, set]
	Returns or sets the scrollable items More...
unsafe bool	ShowPictures [get, set]
	Returns or sets the show pictures More...
unsafe NXOpen.NXColor	ShroudColor [get, set]
	Returns or sets the shroud color More...
unsafe NXOpen.NXColor	SplitterColor [get, set]
	Returns or sets the splitter color More...
unsafe bool	StepoverDisplayAsNCM [get, set]
	Returns or sets the stepover move display as non cutting move More...
unsafe NXOpen.NXColor	SuspectBoundingBoxColor [get, set]
	Returns or sets the suspect bounding box color More...
unsafe string	TemplateFile [get, set]
	Returns or sets the template file More...
unsafe NXOpen.NXColor	TopOffLevelColor [get, set]
	Returns or sets the top off level More...
unsafe NXOpen.NXColor	TrimColor [get, set]
	Returns or sets the trim color More...
unsafe NXOpen.NXColor	UncutRegionColor [get, set]
	Returns or sets the uncut region color More...
unsafe bool	UnlinkInstances [get, set]
	Returns or sets the unlink instances More...
unsafe NXOpen.NXColor	Visualize2dTool1Color [get, set]
	Returns or sets the tool color1 More...
unsafe NXOpen.NXColor	Visualize2dTool2Color [get, set]
	Returns or sets the tool color2 More...
unsafe NXOpen.NXColor	Visualize2dTool3Color [get, set]
	Returns or sets the tool color3 More...
unsafe NXOpen.NXColor	Visualize2dTool4Color [get, set]
	Returns or sets the tool color4 More...
unsafe NXOpen.NXColor	Visualize2dTool5Color [get, set]
	Returns or sets the tool color5 More...
unsafe NXOpen.CAM.Preferences.AnimationAccuracyTypes	VisualizeAnimationAccuracy [get, set]
	Returns or sets the animation accuracy More...
unsafe NXOpen.NXColor	VisualizeAutoBlockColor [get, set]
	Returns or sets the auto block color More...
unsafe NXOpen.NXColor	VisualizeBackgroundColor [get, set]
	Returns or sets the background color More...
unsafe double	VisualizeChordalTolerance [get, set]
	Returns or sets the chordal tolerance More...
unsafe NXOpen.NXColor	VisualizeCollisionsColor [get, set]
	Returns or sets the collisions color More...
unsafe bool	VisualizeDynamicToolAxis [get, set]
	Returns or sets the dynamic tool axis More...
unsafe NXOpen.NXColor	VisualizeExcessMaterialColor [get, set]
	Returns or sets the excess material color More...
unsafe NXOpen.NXColor	VisualizeGougesColor [get, set]
	Returns or sets the gouges color More...
unsafe NXOpen.NXColor	VisualizeIpwColor [get, set]
	Returns or sets the ipw color More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor1 [get, set]
	Returns or sets the ipw dmr color1. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor10 [get, set]
	Returns or sets the ipw dmr color10. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor11 [get, set]
	Returns or sets the ipw dmr color11. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor12 [get, set]
	Returns or sets the ipw dmr color12. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor13 [get, set]
	Returns or sets the ipw dmr color13. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor2 [get, set]
	Returns or sets the ipw dmr color2. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor3 [get, set]
	Returns or sets the ipw dmr color3. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor4 [get, set]
	Returns or sets the ipw dmr color4. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor5 [get, set]
	Returns or sets the ipw dmr color5. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor6 [get, set]
	Returns or sets the ipw dmr color6. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor7 [get, set]
	Returns or sets the ipw dmr color7. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor8 [get, set]
	Returns or sets the ipw dmr color8. More...
unsafe NXOpen.NXColor	VisualizeIpwDmrColor9 [get, set]
	Returns or sets the ipw dmr color9. More...
unsafe NXOpen.CAM.Preferences.IpwDmrColoringTypes	VisualizeIpwDmrColoringMode [get, set]
	Returns or sets the ipw dmr coloring mode More...
unsafe int	VisualizeIpwTranslucency [get, set]
	Returns or sets the ipw translucency More...
unsafe NXOpen.NXColor	VisualizeSafeToolColor [get, set]
	Returns or sets the safe tool color More...
unsafe NXOpen.NXColor	VisualizeTemporaryContainmentCurveColor [get, set]
	Returns or sets the temporary containment curve color More...
unsafe double	VisualizeToolAxisTiltTolerance [get, set]
	Returns or sets the tilt tolerance More...
unsafe NXOpen.NXColor	VisualizeToolDisplayColor [get, set]
	Returns or sets the tool display color More...
unsafe bool	VisualizeToolEditAndDisplay [get, set]
	Returns or sets the tool edit and display More...
unsafe NXOpen.NXColor	VisualizeToolHolderColor [get, set]
	Returns or sets the tool holder color More...
unsafe NXOpen.NXColor	VisualizeToolInsertOrFluteColor [get, set]
	Returns or sets the turning tool insert More...
unsafe NXOpen.NXColor	VisualizeToolShankColor [get, set]
	Returns or sets the tool shank color More...
unsafe int	VisualizeToolTranslucency [get, set]
	Returns or sets the tool translucency More...
unsafe NXOpen.NXColor	WallColor [get, set]
	Returns or sets the wall color More...
unsafe NXOpen.CAM.Preferences.WallSelectionTypes	WallSelection [get, set]
	Returns or sets the wall selection. More...

Additional Inherited Members
Protected Member Functions inherited from NXOpen.TaggedObject
new void	initialize ()
	<exclude> More...

Detailed Description

Represents a cam preferences Builder

To create a new instance of this class, use NXOpen.CAM.CAMSession.CreateCamPreferences

Created in NX7.5.0

Member Enumeration Documentation

enum NXOpen.CAM.Preferences.AnimationAccuracyTypes

the animation accuracy types

Enumerator
Fine	Fine
Coarse	Coarse

enum NXOpen.CAM.Preferences.AuxiliaryFloorColorSelectionTypes

the auxiliary floor selection types.

Enumerator
Bodies	Bodies
Faces	Faces
SurfaceRegion	Surface Region

enum NXOpen.CAM.Preferences.BlankSelectionTypes

the blank selection types.

Enumerator
Bodies	Bodies
Faces	Faces
Curves	Curves
SurfaceRegion	Surface Region
FacetedBodies	Faceted Bodies Region

enum NXOpen.CAM.Preferences.CheckSelectionTypes

the check selection types.

Enumerator
Bodies	Bodies
Faces	Faces
Curves	Curves

enum NXOpen.CAM.Preferences.CsysInformationListingTypes

the information listing types

Enumerator
Wcs	WCS
Mcs	MCS

enum NXOpen.CAM.Preferences.CutAreaSelectionTypes

the cut area selection types.

Enumerator
Bodies	Bodies
Faces	Faces
SurfaceRegion	Surface Region

enum NXOpen.CAM.Preferences.GeometryTypes

the geometry types

Enumerator
Part	part
Blank	blank
Check	check
CutArea	cut area
AuxiliaryFloor	auxiliary floor
Walls	walls
SurfaceAreaDrive	surface area drive geometry

enum NXOpen.CAM.Preferences.IpwDmrColoringTypes

the IPW material removal coloring types

Enumerator
Off	Off. Using the IPW Color
PerTool	Changing cyclic per tool
PerOperation	Changing cyclic per operation
ToolDefined	Using colors defined for tool or tool type

enum NXOpen.CAM.Preferences.IpwToleranceModeTypes

the IPW tolerance modes

Enumerator
NeedleDistance	Needle Distance
NeedleCount	Needle Count

enum NXOpen.CAM.Preferences.PartSelectionTypes

the part selection types.

Enumerator
Bodies	Bodies
Faces	Faces
Curves	Curves
SurfaceRegion	Surface Region
FacetedBodies	Faceted Bodies Region

enum NXOpen.CAM.Preferences.SelectionTypes

the selection types

Enumerator
NoSelectionFilter	no selection filter
Curves	curves
Edges	edges
Faces	faces
Feature	feature
SolidBodies	solid bodies
SheetBodies	sheet bodies
FacetBodies	facet bodies
Groups	groups
SurfaceRegionFeatures	surface region features

enum NXOpen.CAM.Preferences.WallSelectionTypes

the wall selection types.

Enumerator
Bodies	Bodies
Faces	Faces
SurfaceRegion	Surface Region

Member Function Documentation

unsafe string NXOpen.CAM.Preferences.GetDefaultConfigurationFile ( )

inline

Get the default configuration file

Created in NX7.5.0

License requirements: None.

Returns

unsafe string NXOpen.CAM.Preferences.GetDefaultIpwFolder ( )

inline

Get the ipw default folder

Created in NX7.5.0

License requirements: None.

Returns

unsafe string NXOpen.CAM.Preferences.GetDefaultTemplateFile ( )

inline

Get the default template file

Created in NX7.5.0

License requirements: None.

Returns

unsafe NXOpen.CAM.Preferences.SelectionTypes NXOpen.CAM.Preferences.GetSelection ( NXOpen.CAM.Preferences.GeometryTypes  geomType )

inline

The geometry selection type method

Created in NX8.0.0

License requirements: None.

Parameters

geomType

Returns

unsafe void NXOpen.CAM.Preferences.SetSelection ( NXOpen.CAM.Preferences.GeometryTypes  geomType, NXOpen.CAM.Preferences.SelectionTypes  selection  )

inline

The geometry selection type method

Created in NX8.0.0

License requirements: cam_base ("CAM BASE")

Parameters

geomType
selection

Property Documentation

unsafe bool NXOpen.CAM.Preferences.AlwaysUpdateDialogs

getset

Returns or sets the auto update dialog

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.AutomaticallySetMachingData

getset

Returns or sets the auto maching data

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.AuxiliaryFloorColor

getset

Returns or sets the auxiliary floor

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.AuxiliaryFloorColorSelectionTypes NXOpen.CAM.Preferences.AuxiliaryFloorColorSelection

getset

Returns or sets the auxiliary floor selection.

Created in NX7.5.0

Deprecated in NX8.0.0. Use CAM.Preferences.GetSelection and CAM.Preferences.SetSelection instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.BladeBlendColor

getset

Returns or sets the blade blend color

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.BladeColor

getset

Returns or sets the blade color

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.BlankColor

getset

Returns or sets the blank color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.BlankSelectionTypes NXOpen.CAM.Preferences.BlankSelection

getset

Returns or sets the blank selection.

Created in NX7.5.0

Deprecated in NX8.0.0. Use CAM.Preferences.GetSelection and CAM.Preferences.SetSelection instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.CheckColor

getset

Returns or sets the check color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.CheckSelectionTypes NXOpen.CAM.Preferences.CheckSelection

getset

Returns or sets the check selection.

Created in NX7.5.0

Deprecated in NX8.0.0. Use CAM.Preferences.GetSelection and CAM.Preferences.SetSelection instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.ClearanceColor

getset

Returns or sets the clearance color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.Preferences.ClsfDecimals

getset

Returns or sets the clsf_decimals

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.ClsfForceLoadTurret

getset

Returns or sets the force load turret

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe string NXOpen.CAM.Preferences.ConfigurationFile

getset

Returns or sets the configuration file

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.CsysInformationListingTypes NXOpen.CAM.Preferences.CsysInformationListing

getset

Returns or sets the base info

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.CsysOrientWcsToMcs

getset

Returns or sets the orient wcs to mcs

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.CutAreaColor

getset

Returns or sets the cut area color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.CutAreaSelectionTypes NXOpen.CAM.Preferences.CutAreaSelection

getset

Returns or sets the cut area selection.

Created in NX7.5.0

Deprecated in NX8.0.0. Use CAM.Preferences.GetSelection and CAM.Preferences.SetSelection instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.DisplaySelectedObjects

getset

Returns or sets the display selected objects

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.DisplayTurningIpw

getset

Returns or sets the display turning ipw

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.DriveColor

getset

Returns or sets the drive color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.EnableLevelBasedIpw

getset

Returns or sets the enable level based ipw

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.Preferences.FeatureRecognitionLenDiaRatio

getset

Returns or sets the feature recognition length diameter ratio

Created in NX1847.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.ForceRegenerate

getset

Returns or sets the force regenerate

Created in NX10.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.GeneratePaths

getset

Returns or sets the generate tool paths

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.GenerationFullRegeneration

getset

Returns or sets the full regeneration

Created in NX9.0.3

Deprecated in NX10.0.3. Use CAM.Preferences.GenerationSmartRegeneration instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.GenerationPauseAfterEachPath

getset

Returns or sets the pause after each path

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.GenerationRefreshBeforeEachPath

getset

Returns or sets the refresh before each path

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.GenerationSmartRegeneration

getset

Returns or sets the smart regeneration

Created in NX10.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.GenerationUpdateInstances

getset

Returns or sets the update all instances

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.HubColor

getset

Returns or sets the hub color

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.IncludeInstances

getset

Returns or sets the include instances

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.Preferences.IpwNeedleCountCoarse

getset

Returns or sets the coarse ipw needle count

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.Preferences.IpwNeedleCountFine

getset

Returns or sets the fine ipw needle count

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.Preferences.IpwNeedleCountMedium

getset

Returns or sets the medium ipw needle count

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.Preferences.IpwNeedleDistanceCoarse

getset

Returns or sets the coarse ipw needle distance

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.Preferences.IpwNeedleDistanceFine

getset

Returns or sets the fine ipw needle distance

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.Preferences.IpwNeedleDistanceMedium

getset

Returns or sets the medium ipw needle distance

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe string NXOpen.CAM.Preferences.IpwPartsFolder

getset

Returns or sets the ipw parts folder

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.IpwToleranceModeTypes NXOpen.CAM.Preferences.IpwToleranceMode

getset

Returns or sets the ipw tolerance mode

Created in NX9.0.3

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.IpwUseDirectoryOfOriginalPart

getset

Returns or sets the use directory original part

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.LinkMcsRcs

getset

Returns or sets the link mcs rcs

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.OptimizedCutLevelColor

getset

Returns or sets the optimized cut level

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.PartColor

getset

Returns or sets the part color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.PartSelectionTypes NXOpen.CAM.Preferences.PartSelection

getset

Returns or sets the part selection.

Created in NX7.5.0

Deprecated in NX8.0.0. Use CAM.Preferences.GetSelection and CAM.Preferences.SetSelection instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.RelocateParameters

getset

Returns or sets the relocate parameters

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.ReplayRefreshBeforeEachPath

getset

Returns or sets the refresh before each path replay

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.RunProcessAssistant

getset

Returns or sets the process assistant

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.Preferences.SaveIpwAfterCuttingLength

getset

Returns or sets the cutting length threshold that controls when an IPW will be saved

Created in NX12.0.2

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.SaveIpwModel

getset

Returns or sets the ipw model

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.SaveLevelBasedIpw

getset

Returns or sets the level based ipw

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.Preferences.ScrollAreaSize

getset

Returns or sets the scrollable items

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.ShowPictures

getset

Returns or sets the show pictures

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.ShroudColor

getset

Returns or sets the shroud color

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.SplitterColor

getset

Returns or sets the splitter color

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.StepoverDisplayAsNCM

getset

Returns or sets the stepover move display as non cutting move

Created in NX11.0.2

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.SuspectBoundingBoxColor

getset

Returns or sets the suspect bounding box color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe string NXOpen.CAM.Preferences.TemplateFile

getset

Returns or sets the template file

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.TopOffLevelColor

getset

Returns or sets the top off level

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.TrimColor

getset

Returns or sets the trim color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.UncutRegionColor

getset

Returns or sets the uncut region color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.UnlinkInstances

getset

Returns or sets the unlink instances

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.Visualize2dTool1Color

getset

Returns or sets the tool color1

Created in NX7.5.0

Deprecated in NX9.0.0. Use CAM.Preferences.VisualizeIpwDmrColor1 instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.Visualize2dTool2Color

getset

Returns or sets the tool color2

Created in NX7.5.0

Deprecated in NX9.0.0. Use CAM.Preferences.VisualizeIpwDmrColor2 instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.Visualize2dTool3Color

getset

Returns or sets the tool color3

Created in NX7.5.0

Deprecated in NX9.0.0. Use CAM.Preferences.VisualizeIpwDmrColor3 instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.Visualize2dTool4Color

getset

Returns or sets the tool color4

Created in NX7.5.0

Deprecated in NX9.0.0. Use CAM.Preferences.VisualizeIpwDmrColor4 instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.Visualize2dTool5Color

getset

Returns or sets the tool color5

Created in NX7.5.0

Deprecated in NX9.0.0. Use CAM.Preferences.VisualizeIpwDmrColor5 instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.AnimationAccuracyTypes NXOpen.CAM.Preferences.VisualizeAnimationAccuracy

getset

Returns or sets the animation accuracy

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeAutoBlockColor

getset

Returns or sets the auto block color

Created in NX7.5.0

Deprecated in NX8.5.0. Use CAM.Preferences.BlankColor instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeBackgroundColor

getset

Returns or sets the background color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.Preferences.VisualizeChordalTolerance

getset

Returns or sets the chordal tolerance

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeCollisionsColor

getset

Returns or sets the collisions color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.VisualizeDynamicToolAxis

getset

Returns or sets the dynamic tool axis

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeExcessMaterialColor

getset

Returns or sets the excess material color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeGougesColor

getset

Returns or sets the gouges color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwColor

getset

Returns or sets the ipw color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor1

getset

Returns or sets the ipw dmr color1.

Depending on the coloring method, this color is interpreted as 1st cyclic color or tool type color for milling tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor10

getset

Returns or sets the ipw dmr color10.

Depending on the coloring method, this color is interpreted as 10th cyclic color or tool type color for solid cutter tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor11

getset

Returns or sets the ipw dmr color11.

Depending on the coloring method, this color is interpreted as 11th cyclic color or tool type color for mill forming tools.

Created in NX12.0.2

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor12

getset

Returns or sets the ipw dmr color12.

Depending on the coloring method, this color is interpreted as 12th cyclic color or tool type color for drill SPC grooving tools.

Created in NX12.0.2

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor13

getset

Returns or sets the ipw dmr color13.

Depending on the coloring method, this color is interpreted as 13th cyclic color or tool type color for laser tools.

Created in NX12.0.2

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor2

getset

Returns or sets the ipw dmr color2.

Depending on the coloring method, this color is interpreted as 2nd cyclic color or tool type color for drilling tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor3

getset

Returns or sets the ipw dmr color3.

Depending on the coloring method, this color is interpreted as 3rd cyclic color or tool type color for turning tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor4

getset

Returns or sets the ipw dmr color4.

Depending on the coloring method, this color is interpreted as 4th cyclic color or tool type color for grooving tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor5

getset

Returns or sets the ipw dmr color5.

Depending on the coloring method, this color is interpreted as 5th cyclic color or tool type color for threading tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor6

getset

Returns or sets the ipw dmr color6.

Depending on the coloring method, this color is interpreted as 5th cyclic color or tool type color for wire EDM tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor7

getset

Returns or sets the ipw dmr color7.

Depending on the coloring method, this color is interpreted as 7th cyclic color or tool type color for barrel tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor8

getset

Returns or sets the ipw dmr color8.

Depending on the coloring method, this color is interpreted as 8th cyclic color or tool type color for T-cutter tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeIpwDmrColor9

getset

Returns or sets the ipw dmr color9.

Depending on the coloring method, this color is interpreted as 9th cyclic color or tool type color for forming tools.

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.IpwDmrColoringTypes NXOpen.CAM.Preferences.VisualizeIpwDmrColoringMode

getset

Returns or sets the ipw dmr coloring mode

Created in NX9.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.Preferences.VisualizeIpwTranslucency

getset

Returns or sets the ipw translucency

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeSafeToolColor

getset

Returns or sets the safe tool color

Created in NX7.5.2

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeTemporaryContainmentCurveColor

getset

Returns or sets the temporary containment curve color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe double NXOpen.CAM.Preferences.VisualizeToolAxisTiltTolerance

getset

Returns or sets the tilt tolerance

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeToolDisplayColor

getset

Returns or sets the tool display color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe bool NXOpen.CAM.Preferences.VisualizeToolEditAndDisplay

getset

Returns or sets the tool edit and display

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeToolHolderColor

getset

Returns or sets the tool holder color

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeToolInsertOrFluteColor

getset

Returns or sets the turning tool insert

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.VisualizeToolShankColor

getset

Returns or sets the tool shank color

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe int NXOpen.CAM.Preferences.VisualizeToolTranslucency

getset

Returns or sets the tool translucency

Created in NX8.0.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.NXColor NXOpen.CAM.Preferences.WallColor

getset

Returns or sets the wall color

Created in NX7.5.0

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

unsafe NXOpen.CAM.Preferences.WallSelectionTypes NXOpen.CAM.Preferences.WallSelection

getset

Returns or sets the wall selection.

Created in NX7.5.0

Deprecated in NX8.0.0. Use CAM.Preferences.GetSelection and CAM.Preferences.SetSelection instead.

License requirements to get this property: None.

License requirements to set this property: cam_base ("CAM BASE")

---

The documentation for this class was generated from the following file:

• CAM_Preferences.cs