Represents a builder to be used to perform Molded Part Validation analysis. More...
Public Types | |
| enum | AssignToRegion { AssignToRegionCavityRegion, AssignToRegionCoreRegion } |
| Options for assigning faces to the Cavity or Core region. More... | |
| enum | CalculateOption { CalculateOptionKeepExisting, CalculateOptionEditRegionsOnly, CalculateOptionResetAll } |
| Calculation options. More... | |
| enum | CheckScope { CheckScopeFaceProperties, CheckScopeModelProperties, CheckScopeSharpCorners } |
| Check scope for information. More... | |
| enum | RangeType { RangeTypeUniform, RangeTypeRange, RangeTypePlain } |
| Range type for displaying small corner radius faces. More... | |
Public Member Functions | |
| int | ActiveTabPage () |
| Returns the active tab page. More... | |
| void | Calculate () |
| Calculate button on the Calculate Tab page. More... | |
| NXOpen::Direction * | CalculationDrawDirection () |
| Returns the draw direction on the Calculate Tab page. More... | |
| NXOpen::Tooling::MWMoldedPartValidationBuilder::CalculateOption | CalculationOption () |
| Returns the calculation option on the Calculate Tab page. More... | |
| NXOpen::SelectBody * | CalculationProductBody () |
| Returns the product body to be analyzed on the Calculate Tab page. More... | |
| NXOpen::NXColor * | FaceAllFacesColor () |
| Returns the color for applying to all faces on the Face Tab page. More... | |
| NXOpen::NXColor * | FaceCrossoverFacesColor () |
| Returns the color for applying to the crossover faces on the Face Tab page. More... | |
| double | FaceDraftAngleLimit () |
| Returns the draft angle limit on the Face Tab page. More... | |
| bool | FaceHighlightSelectedFaces () |
| Returns the option for highlighting the selected faces on the Face Tab page. More... | |
| NXOpen::NXColor * | FaceNegativeFacesColor1 () |
| Returns the color for applying to the negative small radius faces on the Face Tab page. More... | |
| NXOpen::NXColor * | FaceNegativeFacesColor2 () |
| Returns the color for applying to the negative faces on the Face Tab page. More... | |
| int | FaceNonSelectedFacesTranslucency () |
| Returns the translucency for the non-selected faces on the Face Tab page. More... | |
| NXOpen::NXColor * | FacePositiveFacesColor1 () |
| Returns the color for applying to the positive faces on the Face Tab page. More... | |
| NXOpen::NXColor * | FacePositiveFacesColor2 () |
| Returns the color for applying to the positive small radius faces on the Face Tab page. More... | |
| bool | FaceSelectAllFaces () |
| Returns the option for turning on/off the selection of all faces on the Face Tab page. More... | |
| bool | FaceSelectCrossoverFaces () |
| Returns the option for turning on/off the highlight of the crossover faces on the Face Tab page. More... | |
| int | FaceSelectedFacesTranslucency () |
| Returns the translucency for the selected faces on the Face Tab page. More... | |
| bool | FaceSelectNegativeFaces1 () |
| Returns the option for turning on/off the highlight of the negative small radius faces on the Face Tab page. More... | |
| bool | FaceSelectNegativeFaces2 () |
| Returns the option for turning on/off the highlight of the negative faces on the Face Tab page. More... | |
| bool | FaceSelectPositiveFaces1 () |
| Returns the option for turning on/off the highlight of the positive faces on the Face Tab page. More... | |
| bool | FaceSelectPositiveFaces2 () |
| Returns the option for turning on/off the highlight of the positive small radius faces on the Face Tab page. More... | |
| bool | FaceSelectUndercutAreas () |
| Returns the option for turning on/off the highlight of the undercut area faces on the Face Tab page. More... | |
| bool | FaceSelectUndercutEdges () |
| Returns the option for turning on/off the highlight of the undercut edges on the Face Tab page. More... | |
| bool | FaceSelectVerticalFaces () |
| Returns the option for turning on/off the highlight of the vertical faces on the Face Tab page. More... | |
| void | FaceSetAllFacesColor () |
| Action button for setting color on all faces on the Face Tab page. More... | |
| NXOpen::NXColor * | FaceUndercutAreasColor () |
| Returns the color for applying to the undercut area faces on the Face Tab page. More... | |
| NXOpen::NXColor * | FaceUndercutEdgesColor () |
| Returns the color for applying to the undercut edges on the Face Tab page. More... | |
| NXOpen::NXColor * | FaceVerticalFacesColor () |
| Returns the color for applying to the vertical faces on the Face Tab page. More... | |
| int | InApplyStatus () |
| Returns the flag that indicates the Apply status of the command, needed only in the interactive environment. More... | |
| NXOpen::Tooling::MWMoldedPartValidationBuilder::CheckScope | InformationCheckScope () |
| Returns the check scope on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR01 () |
| Returns the color of row 1 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR02 () |
| Returns the color of row 2 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR03 () |
| Returns the color of row 3 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR04 () |
| Returns the color of row 4 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR05 () |
| Returns the color of row 5 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR06 () |
| Returns the color of row 6 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR07 () |
| Returns the color of row 7 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR08 () |
| Returns the color of row 8 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR09 () |
| Returns the color of row 9 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR10 () |
| Returns the color of row 10 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR11 () |
| Returns the color of row 11 for the small radius faces on the Information Tab page. More... | |
| NXOpen::NXColor * | InformationColorR12 () |
| Returns the color of row 12 for the small radius faces on the Information Tab page. More... | |
| NXOpen::SelectFace * | InformationInspectFace () |
| Returns the face selected face for displaying the face properties. More... | |
| double | InformationLowerLimit () |
| Returns the lower limit of the range limit values on the Information Tab page. More... | |
| double | InformationLowerLimitR01 () |
| Returns the lower limit of row 1 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR02 () |
| Returns the lower limit of row 2 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR03 () |
| Returns the lower limit of row 3 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR04 () |
| Returns the lower limit of row 4 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR05 () |
| Returns the lower limit of row 5 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR06 () |
| Returns the lower limit of row 6 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR07 () |
| Returns the lower limit of row 7 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR08 () |
| Returns the lower limit of row 8 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR09 () |
| Returns the lower limit of row 9 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR10 () |
| Returns the lower limit of row 10 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR11 () |
| Returns the lower limit of row 11 for the small radius faces on the Information Tab page. More... | |
| double | InformationLowerLimitR12 () |
| Returns the lower limit of row 12 for the small radius faces on the Information Tab page. More... | |
| NXOpen::Tooling::MWMoldedPartValidationBuilder::RangeType | InformationRangeType () |
| Returns the range type on the Information Tab page. More... | |
| double | InformationSharpAngleLimit () |
| Returns the sharp angle limit on the Information Tab page. More... | |
| bool | InformationShowBoundaryEdges () |
| Returns the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page. More... | |
| bool | InformationShowRangeR01 () |
| Returns the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page. More... | |
| bool | InformationShowRangeR02 () |
| Returns the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page. More... | |
| bool | InformationShowRangeR03 () |
| Returns the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page. More... | |
| bool | InformationShowRangeR04 () |
| Returns the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page. More... | |
| bool | InformationShowRangeR05 () |
| Returns the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page. More... | |
| bool | InformationShowRangeR06 () |
| Returns the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page. More... | |
| bool | InformationShowRangeR07 () |
| Returns the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page. More... | |
| bool | InformationShowRangeR08 () |
| Returns the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page. More... | |
| bool | InformationShowRangeR09 () |
| Returns the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page. More... | |
| bool | InformationShowRangeR10 () |
| Returns the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page. More... | |
| bool | InformationShowRangeR11 () |
| Returns the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page. More... | |
| bool | InformationShowRangeR12 () |
| Returns the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page. More... | |
| bool | InformationShowSharpEdges () |
| Returns the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page. More... | |
| double | InformationUpperLimit () |
| Returns the upper limit on the Information Tab page. More... | |
| double | InformationUpperLimitR01 () |
| Returns the upper limit of row 1 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR02 () |
| Returns the upper limit of row 2 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR03 () |
| Returns the upper limit of row 3 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR04 () |
| Returns the upper limit of row 4 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR05 () |
| Returns the upper limit of row 5 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR06 () |
| Returns the upper limit of row 6 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR07 () |
| Returns the upper limit of row 7 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR08 () |
| Returns the upper limit of row 8 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR09 () |
| Returns the upper limit of row 9 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR10 () |
| Returns the upper limit of row 10 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR11 () |
| Returns the upper limit of row 11 for the small radius faces on the Information Tab page. More... | |
| double | InformationUpperLimitR12 () |
| Returns the upper limit of row 12 for the small radius faces on the Information Tab page. More... | |
| bool | InformationUseSingleTolerance () |
| Returns the option for using a single tolerance for defining the range limit values on the Information Tab page. More... | |
| void | InitMpvData (int changeBody) |
| Initialize the MPV data for performing analysis in Molded Part Validation. More... | |
| void | PerformModelPropertiesCalculation () |
| Perform model properties calculation if the calculation has not been performed before. More... | |
| void | PerformSharpCornersCalculation () |
| Perform the sharp corners calculation if the calculation has not been performed before. More... | |
| void | ProcessFaceSplit () |
| Action button for invoking the Split Face command on the Face Tab page. More... | |
| NXOpen::Tooling::MWMoldedPartValidationBuilder::AssignToRegion | RegionAssignToRegionOption () |
| Returns the option for assigning the selected region faces to the cavity or core region on the Region Tab page. More... | |
| NXOpen::NXColor * | RegionCavityRegionColor () |
| Returns the color for applying to the cavity region faces on the Region Tab page. More... | |
| int | RegionCavityRegionTranslucency () |
| Returns the translucency for applying to the cavity region faces on the Region Tab page. More... | |
| NXOpen::NXColor * | RegionCoreRegionColor () |
| Returns the color for applying to the core region faces on the Region Tab page. More... | |
| int | RegionCoreRegionTranslucency () |
| Returns the translucency for applying to the core region faces on the Region Tab page. More... | |
| NXOpen::SelectFaceList * | RegionFaces () |
| Returns the faces selected for assigning to the cavity or core region. More... | |
| bool | RegionSelectCrossoverRegionFaces () |
| Returns the option for including or removing the crossover region faces in the selection on the Region Tab page. More... | |
| bool | RegionSelectCrossoverVerticalFaces () |
| Returns the option for including or removing the crossover vertical faces in the selection on the Region Tab page. More... | |
| bool | RegionSelectUnknownFaces () |
| Returns the option for including or removing the unknown faces in the selection on the Region Tab page. More... | |
| void | RegionSetRegionsColor () |
| Action button for setting color on the cavity, core and undefined region faces on the Region Tab page. More... | |
| bool | RegionShowIncompleteLoops () |
| Returns the option for turning on/off the highlight of the incomplete loop edges. More... | |
| bool | RegionShowInternalLoops () |
| Returns the option for turning on/off the highlight of the internal loop edges. More... | |
| bool | RegionShowPartingEdges () |
| Returns the option for turning on/off the highlight of the parting edges. More... | |
| NXOpen::NXColor * | RegionUndefinedRegionColor () |
| Returns the color for applying to the undefined region faces on the Region Tab page. More... | |
| void | SetActiveTabPage (int activeTabPage) |
| Sets the active tab page. More... | |
| void | SetCalculationDrawDirection (NXOpen::Direction *calculationDrawDirection) |
| Sets the draw direction on the Calculate Tab page. More... | |
| void | SetCalculationOption (NXOpen::Tooling::MWMoldedPartValidationBuilder::CalculateOption calculationOption) |
| Sets the calculation option on the Calculate Tab page. More... | |
| void | SetCalculationProductBody (NXOpen::Body *calculationProductBody) |
| Set the product body to be analyzed on the Calculate Tab page. More... | |
| void | SetFaceAllFacesColor (NXOpen::NXColor *faceAllFacesColor) |
| Sets the color for applying to all faces on the Face Tab page. More... | |
| void | SetFaceCrossoverFacesColor (NXOpen::NXColor *faceCrossoverFacesColor) |
| Sets the color for applying to the crossover faces on the Face Tab page. More... | |
| void | SetFaceDraftAngleLimit (double faceDraftAngleLimit) |
| Sets the draft angle limit on the Face Tab page. More... | |
| void | SetFaceHighlightSelectedFaces (bool faceHighlightSelectedFaces) |
| Sets the option for highlighting the selected faces on the Face Tab page. More... | |
| void | SetFaceNegativeFacesColor1 (NXOpen::NXColor *faceNegativeFacesColor1) |
| Sets the color for applying to the negative small radius faces on the Face Tab page. More... | |
| void | SetFaceNegativeFacesColor2 (NXOpen::NXColor *faceNegativeFacesColor2) |
| Sets the color for applying to the negative faces on the Face Tab page. More... | |
| void | SetFaceNonSelectedFacesTranslucency (int faceNonSelectedFacesTranslucency) |
| Sets the translucency for the non-selected faces on the Face Tab page. More... | |
| void | SetFacePositiveFacesColor1 (NXOpen::NXColor *facePositiveFacesColor1) |
| Sets the color for applying to the positive faces on the Face Tab page. More... | |
| void | SetFacePositiveFacesColor2 (NXOpen::NXColor *facePositiveFacesColor2) |
| Sets the color for applying to the positive small radius faces on the Face Tab page. More... | |
| void | SetFaceSelectAllFaces (bool faceSelectAllFaces) |
| Sets the option for turning on/off the selection of all faces on the Face Tab page. More... | |
| void | SetFaceSelectCrossoverFaces (bool faceSelectCrossoverFaces) |
| Sets the option for turning on/off the highlight of the crossover faces on the Face Tab page. More... | |
| void | SetFaceSelectedFacesTranslucency (int faceSelectedFacesTranslucency) |
| Sets the translucency for the selected faces on the Face Tab page. More... | |
| void | SetFaceSelectNegativeFaces1 (bool faceSelectNegativeFaces1) |
| Sets the option for turning on/off the highlight of the negative small radius faces on the Face Tab page. More... | |
| void | SetFaceSelectNegativeFaces2 (bool faceSelectNegativeFaces2) |
| Sets the option for turning on/off the highlight of the negative faces on the Face Tab page. More... | |
| void | SetFaceSelectPositiveFaces1 (bool faceSelectPositiveFaces1) |
| Sets the option for turning on/off the highlight of the positive faces on the Face Tab page. More... | |
| void | SetFaceSelectPositiveFaces2 (bool faceSelectPositiveFaces2) |
| Sets the option for turning on/off the highlight of the positive small radius faces on the Face Tab page. More... | |
| void | SetFaceSelectUndercutAreas (bool faceSelectUndercutAreas) |
| Sets the option for turning on/off the highlight of the undercut area faces on the Face Tab page. More... | |
| void | SetFaceSelectUndercutEdges (bool faceSelectUndercutEdges) |
| Sets the option for turning on/off the highlight of the undercut edges on the Face Tab page. More... | |
| void | SetFaceSelectVerticalFaces (bool faceSelectVerticalFaces) |
| Sets the option for turning on/off the highlight of the vertical faces on the Face Tab page. More... | |
| void | SetFaceUndercutAreasColor (NXOpen::NXColor *faceUndercutAreasColor) |
| Sets the color for applying to the undercut area faces on the Face Tab page. More... | |
| void | SetFaceUndercutEdgesColor (NXOpen::NXColor *faceUndercutEdgesColor) |
| Sets the color for applying to the undercut edges on the Face Tab page. More... | |
| void | SetFaceVerticalFacesColor (NXOpen::NXColor *faceVerticalFacesColor) |
| Sets the color for applying to the vertical faces on the Face Tab page. More... | |
| void | SetInApplyStatus (int inApplyStatus) |
| Sets the flag that indicates the Apply status of the command, needed only in the interactive environment. More... | |
| void | SetInformationCheckScope (NXOpen::Tooling::MWMoldedPartValidationBuilder::CheckScope informationCheckScope) |
| Sets the check scope on the Information Tab page. More... | |
| void | SetInformationColorR01 (NXOpen::NXColor *informationColorR01) |
| Sets the color of row 1 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR02 (NXOpen::NXColor *informationColorR02) |
| Sets the color of row 2 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR03 (NXOpen::NXColor *informationColorR03) |
| Sets the color of row 3 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR04 (NXOpen::NXColor *informationColorR04) |
| Sets the color of row 4 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR05 (NXOpen::NXColor *informationColorR05) |
| Sets the color of row 5 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR06 (NXOpen::NXColor *informationColorR06) |
| Sets the color of row 6 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR07 (NXOpen::NXColor *informationColorR07) |
| Sets the color of row 7 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR08 (NXOpen::NXColor *informationColorR08) |
| Sets the color of row 8 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR09 (NXOpen::NXColor *informationColorR09) |
| Sets the color of row 9 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR10 (NXOpen::NXColor *informationColorR10) |
| Sets the color of row 10 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR11 (NXOpen::NXColor *informationColorR11) |
| Sets the color of row 11 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationColorR12 (NXOpen::NXColor *informationColorR12) |
| Sets the color of row 12 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimit (double informationLowerLimit) |
| Sets the lower limit of the range limit values on the Information Tab page. More... | |
| void | SetInformationLowerLimitR01 (double informationLowerLimitR01) |
| Sets the lower limit of row 1 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR02 (double informationLowerLimitR02) |
| Sets the lower limit of row 2 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR03 (double informationLowerLimitR03) |
| Sets the lower limit of row 3 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR04 (double informationLowerLimitR04) |
| Sets the lower limit of row 4 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR05 (double informationLowerLimitR05) |
| Sets the lower limit of row 5 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR06 (double informationLowerLimitR06) |
| Sets the lower limit of row 6 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR07 (double informationLowerLimitR07) |
| Sets the lower limit of row 7 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR08 (double informationLowerLimitR08) |
| Sets the lower limit of row 8 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR09 (double informationLowerLimitR09) |
| Sets the lower limit of row 9 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR10 (double informationLowerLimitR10) |
| Sets the lower limit of row 10 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR11 (double informationLowerLimitR11) |
| Sets the lower limit of row 11 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationLowerLimitR12 (double informationLowerLimitR12) |
| Sets the lower limit of row 12 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationRangeType (NXOpen::Tooling::MWMoldedPartValidationBuilder::RangeType informationRangeType) |
| Sets the range type on the Information Tab page. More... | |
| void | SetInformationSharpAngleLimit (double informationSharpAngleLimit) |
| Sets the sharp angle limit on the Information Tab page. More... | |
| void | SetInformationShowBoundaryEdges (bool informationShowBoundaryEdges) |
| Sets the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page. More... | |
| void | SetInformationShowRangeR01 (bool informationShowRangeR01) |
| Sets the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page. More... | |
| void | SetInformationShowRangeR02 (bool informationShowRangeR02) |
| Sets the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page. More... | |
| void | SetInformationShowRangeR03 (bool informationShowRangeR03) |
| Sets the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page. More... | |
| void | SetInformationShowRangeR04 (bool informationShowRangeR04) |
| Sets the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page. More... | |
| void | SetInformationShowRangeR05 (bool informationShowRangeR05) |
| Sets the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page. More... | |
| void | SetInformationShowRangeR06 (bool informationShowRangeR06) |
| Sets the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page. More... | |
| void | SetInformationShowRangeR07 (bool informationShowRangeR07) |
| Sets the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page. More... | |
| void | SetInformationShowRangeR08 (bool informationShowRangeR08) |
| Sets the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page. More... | |
| void | SetInformationShowRangeR09 (bool informationShowRangeR09) |
| Sets the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page. More... | |
| void | SetInformationShowRangeR10 (bool informationShowRangeR10) |
| Sets the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page. More... | |
| void | SetInformationShowRangeR11 (bool informationShowRangeR11) |
| Sets the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page. More... | |
| void | SetInformationShowRangeR12 (bool informationShowRangeR12) |
| Sets the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page. More... | |
| void | SetInformationShowSharpEdges (bool informationShowSharpEdges) |
| Sets the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page. More... | |
| void | SetInformationUpperLimit (double informationUpperLimit) |
| Sets the upper limit on the Information Tab page. More... | |
| void | SetInformationUpperLimitR01 (double informationUpperLimitR01) |
| Sets the upper limit of row 1 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR02 (double informationUpperLimitR02) |
| Sets the upper limit of row 2 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR03 (double informationUpperLimitR03) |
| Sets the upper limit of row 3 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR04 (double informationUpperLimitR04) |
| Sets the upper limit of row 4 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR05 (double informationUpperLimitR05) |
| Sets the upper limit of row 5 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR06 (double informationUpperLimitR06) |
| Sets the upper limit of row 6 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR07 (double informationUpperLimitR07) |
| Sets the upper limit of row 7 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR08 (double informationUpperLimitR08) |
| Sets the upper limit of row 8 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR09 (double informationUpperLimitR09) |
| Sets the upper limit of row 9 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR10 (double informationUpperLimitR10) |
| Sets the upper limit of row 10 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR11 (double informationUpperLimitR11) |
| Sets the upper limit of row 11 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUpperLimitR12 (double informationUpperLimitR12) |
| Sets the upper limit of row 12 for the small radius faces on the Information Tab page. More... | |
| void | SetInformationUseSingleTolerance (bool informationUseSingleTolerance) |
| Sets the option for using a single tolerance for defining the range limit values on the Information Tab page. More... | |
| void | SetRegionAssignToRegionOption (NXOpen::Tooling::MWMoldedPartValidationBuilder::AssignToRegion regionAssignToRegionOption) |
| Sets the option for assigning the selected region faces to the cavity or core region on the Region Tab page. More... | |
| void | SetRegionCavityRegionColor (NXOpen::NXColor *regionCavityRegionColor) |
| Sets the color for applying to the cavity region faces on the Region Tab page. More... | |
| void | SetRegionCavityRegionTranslucency (int regionCavityRegionTranslucency) |
| Sets the translucency for applying to the cavity region faces on the Region Tab page. More... | |
| void | SetRegionCoreRegionColor (NXOpen::NXColor *regionCoreRegionColor) |
| Sets the color for applying to the core region faces on the Region Tab page. More... | |
| void | SetRegionCoreRegionTranslucency (int regionCoreRegionTranslucency) |
| Sets the translucency for applying to the core region faces on the Region Tab page. More... | |
| void | SetRegionSelectCrossoverRegionFaces (bool regionSelectCrossoverRegionFaces) |
| Sets the option for including or removing the crossover region faces in the selection on the Region Tab page. More... | |
| void | SetRegionSelectCrossoverVerticalFaces (bool regionSelectCrossoverVerticalFaces) |
| Sets the option for including or removing the crossover vertical faces in the selection on the Region Tab page. More... | |
| void | SetRegionSelectUnknownFaces (bool regionSelectUnknownFaces) |
| Sets the option for including or removing the unknown faces in the selection on the Region Tab page. More... | |
| void | SetRegionShowIncompleteLoops (bool regionShowIncompleteLoops) |
| Sets the option for turning on/off the highlight of the incomplete loop edges. More... | |
| void | SetRegionShowInternalLoops (bool regionShowInternalLoops) |
| Sets the option for turning on/off the highlight of the internal loop edges. More... | |
| void | SetRegionShowPartingEdges (bool regionShowPartingEdges) |
| Sets the option for turning on/off the highlight of the parting edges. More... | |
| void | SetRegionUndefinedRegionColor (NXOpen::NXColor *regionUndefinedRegionColor) |
| Sets the color for applying to the undefined region faces on the Region Tab page. More... | |
| void | UpdateEjectDirection () |
| Update the eject direction. More... | |
| void | UpdateMpvData () |
| Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog. More... | |
| void | UpdateSharpEdgesInformation () |
| Update the sharp edges information based on the new sharp angle limit which has been changed by the user. More... | |
| void | UpdateSmallRadiusFacesInformation () |
| Update the small radius faces information based on the new range limits of the radius which has been changed by the user. More... | |
 Public Member Functions inherited from NXOpen::Builder | |
| NXOpen::NXObject * | Commit () |
| Commits any edits that have been applied to the builder. More... | |
| void | Destroy () |
| Deletes the builder, and cleans up any objects created by the builder. More... | |
| std::vector< NXOpen::NXObject * > | GetCommittedObjects () |
| For builders that create more than one object, this method returns the objects that are created by commit. More... | |
| NXOpen::NXObject * | GetObject () |
| Returns the object currently being edited by this builder. More... | |
| void | ShowResults () |
| Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
| virtual bool | Validate () |
| Validate whether the inputs to the component are sufficient for commit to be called. More... | |
| Public Member Functions inherited from NXOpen::TaggedObject | |
| tag_t | Tag () const |
| Returns the tag of this object. More... | |
Detailed Description
Represents a builder to be used to perform Molded Part Validation analysis.
To create a new instance of this class, use NXOpen::Tooling::MWMoldedPartValidationManager::CreateMWMoldedPartValidationBuilder
Default values.
| Property | Value |
|---|---|
|
CalculationOption |
KeepExisting |
|
FaceDraftAngleLimit |
3 |
|
FaceHighlightSelectedFaces |
1 |
|
FaceNonSelectedFacesTranslucency |
0 |
|
FaceSelectAllFaces |
0 |
|
FaceSelectCrossoverFaces |
0 |
|
FaceSelectNegativeFaces1 |
0 |
|
FaceSelectNegativeFaces2 |
0 |
|
FaceSelectPositiveFaces1 |
0 |
|
FaceSelectPositiveFaces2 |
0 |
|
FaceSelectUndercutAreas |
0 |
|
FaceSelectUndercutEdges |
0 |
|
FaceSelectVerticalFaces |
0 |
|
FaceSelectedFacesTranslucency |
0 |
|
InformationCheckScope |
FaceProperties |
|
InformationLowerLimit |
0 |
|
InformationLowerLimitR01 |
5.5 |
|
InformationLowerLimitR02 |
5 |
|
InformationLowerLimitR03 |
4.5 |
|
InformationLowerLimitR04 |
4 |
|
InformationLowerLimitR05 |
3.5 |
|
InformationLowerLimitR06 |
3 |
|
InformationLowerLimitR07 |
2.5 |
|
InformationLowerLimitR08 |
2 |
|
InformationLowerLimitR09 |
1.5 |
|
InformationLowerLimitR10 |
1 |
|
InformationLowerLimitR11 |
0.5 |
|
InformationLowerLimitR12 |
0 |
|
InformationRangeType |
Uniform |
|
InformationSharpAngleLimit |
6 |
|
InformationShowBoundaryEdges |
0 |
|
InformationShowRangeR01 |
0 |
|
InformationShowRangeR02 |
0 |
|
InformationShowRangeR03 |
0 |
|
InformationShowRangeR04 |
0 |
|
InformationShowRangeR05 |
0 |
|
InformationShowRangeR06 |
0 |
|
InformationShowRangeR07 |
0 |
|
InformationShowRangeR08 |
0 |
|
InformationShowRangeR09 |
0 |
|
InformationShowRangeR10 |
0 |
|
InformationShowRangeR11 |
0 |
|
InformationShowRangeR12 |
0 |
|
InformationShowSharpEdges |
0 |
|
InformationUpperLimit |
6 |
|
InformationUpperLimitR01 |
6 |
|
InformationUpperLimitR02 |
5.5 |
|
InformationUpperLimitR03 |
5 |
|
InformationUpperLimitR04 |
4.5 |
|
InformationUpperLimitR05 |
4 |
|
InformationUpperLimitR06 |
3.5 |
|
InformationUpperLimitR07 |
3 |
|
InformationUpperLimitR08 |
2.5 |
|
InformationUpperLimitR09 |
2 |
|
InformationUpperLimitR10 |
0.5 |
|
InformationUpperLimitR11 |
1 |
|
InformationUpperLimitR12 |
0.5 |
|
InformationUseSingleTolerance |
0 |
|
RegionAssignToRegionOption |
CavityRegion |
|
RegionCavityRegionTranslucency |
0 |
|
RegionCoreRegionTranslucency |
0 |
|
RegionSelectCrossoverRegionFaces |
0 |
|
RegionSelectCrossoverVerticalFaces |
0 |
|
RegionSelectUnknownFaces |
0 |
|
RegionShowIncompleteLoops |
1 |
|
RegionShowInternalLoops |
1 |
|
RegionShowPartingEdges |
1 |
Created in NX8.0.0.
Member Enumeration Documentation
Member Function Documentation
| int NXOpen::Tooling::MWMoldedPartValidationBuilder::ActiveTabPage | ( | ) |
Returns the active tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::Calculate | ( | ) |
Calculate button on the Calculate Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::Direction* NXOpen::Tooling::MWMoldedPartValidationBuilder::CalculationDrawDirection | ( | ) |
Returns the draw direction on the Calculate Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::Tooling::MWMoldedPartValidationBuilder::CalculateOption NXOpen::Tooling::MWMoldedPartValidationBuilder::CalculationOption | ( | ) |
Returns the calculation option on the Calculate Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::SelectBody* NXOpen::Tooling::MWMoldedPartValidationBuilder::CalculationProductBody | ( | ) |
Returns the product body to be analyzed on the Calculate Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceAllFacesColor | ( | ) |
Returns the color for applying to all faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceCrossoverFacesColor | ( | ) |
Returns the color for applying to the crossover faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceDraftAngleLimit | ( | ) |
Returns the draft angle limit on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceHighlightSelectedFaces | ( | ) |
Returns the option for highlighting the selected faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceNegativeFacesColor1 | ( | ) |
Returns the color for applying to the negative small radius faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceNegativeFacesColor2 | ( | ) |
Returns the color for applying to the negative faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| int NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceNonSelectedFacesTranslucency | ( | ) |
Returns the translucency for the non-selected faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FacePositiveFacesColor1 | ( | ) |
Returns the color for applying to the positive faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FacePositiveFacesColor2 | ( | ) |
Returns the color for applying to the positive small radius faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectAllFaces | ( | ) |
Returns the option for turning on/off the selection of all faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectCrossoverFaces | ( | ) |
Returns the option for turning on/off the highlight of the crossover faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| int NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectedFacesTranslucency | ( | ) |
Returns the translucency for the selected faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectNegativeFaces1 | ( | ) |
Returns the option for turning on/off the highlight of the negative small radius faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectNegativeFaces2 | ( | ) |
Returns the option for turning on/off the highlight of the negative faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectPositiveFaces1 | ( | ) |
Returns the option for turning on/off the highlight of the positive faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectPositiveFaces2 | ( | ) |
Returns the option for turning on/off the highlight of the positive small radius faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectUndercutAreas | ( | ) |
Returns the option for turning on/off the highlight of the undercut area faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectUndercutEdges | ( | ) |
Returns the option for turning on/off the highlight of the undercut edges on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSelectVerticalFaces | ( | ) |
Returns the option for turning on/off the highlight of the vertical faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceSetAllFacesColor | ( | ) |
Action button for setting color on all faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceUndercutAreasColor | ( | ) |
Returns the color for applying to the undercut area faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceUndercutEdgesColor | ( | ) |
Returns the color for applying to the undercut edges on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::FaceVerticalFacesColor | ( | ) |
Returns the color for applying to the vertical faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| int NXOpen::Tooling::MWMoldedPartValidationBuilder::InApplyStatus | ( | ) |
Returns the flag that indicates the Apply status of the command, needed only in the interactive environment.
0: "Apply" has not been done before; 1: "Apply" has been done before.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::Tooling::MWMoldedPartValidationBuilder::CheckScope NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationCheckScope | ( | ) |
Returns the check scope on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR01 | ( | ) |
Returns the color of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR02 | ( | ) |
Returns the color of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR03 | ( | ) |
Returns the color of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR04 | ( | ) |
Returns the color of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR05 | ( | ) |
Returns the color of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR06 | ( | ) |
Returns the color of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR07 | ( | ) |
Returns the color of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR08 | ( | ) |
Returns the color of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR09 | ( | ) |
Returns the color of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR10 | ( | ) |
Returns the color of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR11 | ( | ) |
Returns the color of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationColorR12 | ( | ) |
Returns the color of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::SelectFace* NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationInspectFace | ( | ) |
Returns the face selected face for displaying the face properties.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimit | ( | ) |
Returns the lower limit of the range limit values on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR01 | ( | ) |
Returns the lower limit of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR02 | ( | ) |
Returns the lower limit of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR03 | ( | ) |
Returns the lower limit of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR04 | ( | ) |
Returns the lower limit of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR05 | ( | ) |
Returns the lower limit of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR06 | ( | ) |
Returns the lower limit of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR07 | ( | ) |
Returns the lower limit of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR08 | ( | ) |
Returns the lower limit of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR09 | ( | ) |
Returns the lower limit of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR10 | ( | ) |
Returns the lower limit of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR11 | ( | ) |
Returns the lower limit of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationLowerLimitR12 | ( | ) |
Returns the lower limit of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::Tooling::MWMoldedPartValidationBuilder::RangeType NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationRangeType | ( | ) |
Returns the range type on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationSharpAngleLimit | ( | ) |
Returns the sharp angle limit on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowBoundaryEdges | ( | ) |
Returns the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR01 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR02 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR03 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR04 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR05 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR06 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR07 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR08 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR09 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR10 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR11 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowRangeR12 | ( | ) |
Returns the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationShowSharpEdges | ( | ) |
Returns the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimit | ( | ) |
Returns the upper limit on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR01 | ( | ) |
Returns the upper limit of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR02 | ( | ) |
Returns the upper limit of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR03 | ( | ) |
Returns the upper limit of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR04 | ( | ) |
Returns the upper limit of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR05 | ( | ) |
Returns the upper limit of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR06 | ( | ) |
Returns the upper limit of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR07 | ( | ) |
Returns the upper limit of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR08 | ( | ) |
Returns the upper limit of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR09 | ( | ) |
Returns the upper limit of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR10 | ( | ) |
Returns the upper limit of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR11 | ( | ) |
Returns the upper limit of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| double NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUpperLimitR12 | ( | ) |
Returns the upper limit of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::InformationUseSingleTolerance | ( | ) |
Returns the option for using a single tolerance for defining the range limit values on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::InitMpvData | ( | int | changeBody | ) |
Initialize the MPV data for performing analysis in Molded Part Validation.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
changeBody 0: No change in the selected body; 1: Change in the selected body; 2: Change in direction for the selected body.
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::PerformModelPropertiesCalculation | ( | ) |
Perform model properties calculation if the calculation has not been performed before.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::PerformSharpCornersCalculation | ( | ) |
Perform the sharp corners calculation if the calculation has not been performed before.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::ProcessFaceSplit | ( | ) |
Action button for invoking the Split Face command on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::Tooling::MWMoldedPartValidationBuilder::AssignToRegion NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionAssignToRegionOption | ( | ) |
Returns the option for assigning the selected region faces to the cavity or core region on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionCavityRegionColor | ( | ) |
Returns the color for applying to the cavity region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| int NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionCavityRegionTranslucency | ( | ) |
Returns the translucency for applying to the cavity region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionCoreRegionColor | ( | ) |
Returns the color for applying to the core region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| int NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionCoreRegionTranslucency | ( | ) |
Returns the translucency for applying to the core region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::SelectFaceList* NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionFaces | ( | ) |
Returns the faces selected for assigning to the cavity or core region.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionSelectCrossoverRegionFaces | ( | ) |
Returns the option for including or removing the crossover region faces in the selection on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionSelectCrossoverVerticalFaces | ( | ) |
Returns the option for including or removing the crossover vertical faces in the selection on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionSelectUnknownFaces | ( | ) |
Returns the option for including or removing the unknown faces in the selection on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionSetRegionsColor | ( | ) |
Action button for setting color on the cavity, core and undefined region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionShowIncompleteLoops | ( | ) |
Returns the option for turning on/off the highlight of the incomplete loop edges.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionShowInternalLoops | ( | ) |
Returns the option for turning on/off the highlight of the internal loop edges.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| bool NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionShowPartingEdges | ( | ) |
Returns the option for turning on/off the highlight of the parting edges.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| NXOpen::NXColor* NXOpen::Tooling::MWMoldedPartValidationBuilder::RegionUndefinedRegionColor | ( | ) |
Returns the color for applying to the undefined region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetActiveTabPage | ( | int | activeTabPage | ) |
Sets the active tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
activeTabPage activetabpage
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetCalculationDrawDirection | ( | NXOpen::Direction * | calculationDrawDirection | ) |
Sets the draw direction on the Calculate Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
calculationDrawDirection calculationdrawdirection
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetCalculationOption | ( | NXOpen::Tooling::MWMoldedPartValidationBuilder::CalculateOption | calculationOption | ) |
Sets the calculation option on the Calculate Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
calculationOption calculationoption
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetCalculationProductBody | ( | NXOpen::Body * | calculationProductBody | ) |
Set the product body to be analyzed on the Calculate Tab page.
Created in NX10.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
calculationProductBody The product body
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceAllFacesColor | ( | NXOpen::NXColor * | faceAllFacesColor | ) |
Sets the color for applying to all faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceAllFacesColor faceallfacescolor
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceCrossoverFacesColor | ( | NXOpen::NXColor * | faceCrossoverFacesColor | ) |
Sets the color for applying to the crossover faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceCrossoverFacesColor facecrossoverfacescolor
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceDraftAngleLimit | ( | double | faceDraftAngleLimit | ) |
Sets the draft angle limit on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceDraftAngleLimit facedraftanglelimit
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceHighlightSelectedFaces | ( | bool | faceHighlightSelectedFaces | ) |
Sets the option for highlighting the selected faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceHighlightSelectedFaces facehighlightselectedfaces
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceNegativeFacesColor1 | ( | NXOpen::NXColor * | faceNegativeFacesColor1 | ) |
Sets the color for applying to the negative small radius faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceNegativeFacesColor1 facenegativefacescolor1
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceNegativeFacesColor2 | ( | NXOpen::NXColor * | faceNegativeFacesColor2 | ) |
Sets the color for applying to the negative faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceNegativeFacesColor2 facenegativefacescolor2
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceNonSelectedFacesTranslucency | ( | int | faceNonSelectedFacesTranslucency | ) |
Sets the translucency for the non-selected faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceNonSelectedFacesTranslucency facenonselectedfacestranslucency
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFacePositiveFacesColor1 | ( | NXOpen::NXColor * | facePositiveFacesColor1 | ) |
Sets the color for applying to the positive faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
facePositiveFacesColor1 facepositivefacescolor1
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFacePositiveFacesColor2 | ( | NXOpen::NXColor * | facePositiveFacesColor2 | ) |
Sets the color for applying to the positive small radius faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
facePositiveFacesColor2 facepositivefacescolor2
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectAllFaces | ( | bool | faceSelectAllFaces | ) |
Sets the option for turning on/off the selection of all faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectAllFaces faceselectallfaces
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectCrossoverFaces | ( | bool | faceSelectCrossoverFaces | ) |
Sets the option for turning on/off the highlight of the crossover faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectCrossoverFaces faceselectcrossoverfaces
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectedFacesTranslucency | ( | int | faceSelectedFacesTranslucency | ) |
Sets the translucency for the selected faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectedFacesTranslucency faceselectedfacestranslucency
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectNegativeFaces1 | ( | bool | faceSelectNegativeFaces1 | ) |
Sets the option for turning on/off the highlight of the negative small radius faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectNegativeFaces1 faceselectnegativefaces1
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectNegativeFaces2 | ( | bool | faceSelectNegativeFaces2 | ) |
Sets the option for turning on/off the highlight of the negative faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectNegativeFaces2 faceselectnegativefaces2
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectPositiveFaces1 | ( | bool | faceSelectPositiveFaces1 | ) |
Sets the option for turning on/off the highlight of the positive faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectPositiveFaces1 faceselectpositivefaces1
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectPositiveFaces2 | ( | bool | faceSelectPositiveFaces2 | ) |
Sets the option for turning on/off the highlight of the positive small radius faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectPositiveFaces2 faceselectpositivefaces2
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectUndercutAreas | ( | bool | faceSelectUndercutAreas | ) |
Sets the option for turning on/off the highlight of the undercut area faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectUndercutAreas faceselectundercutareas
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectUndercutEdges | ( | bool | faceSelectUndercutEdges | ) |
Sets the option for turning on/off the highlight of the undercut edges on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectUndercutEdges faceselectundercutedges
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceSelectVerticalFaces | ( | bool | faceSelectVerticalFaces | ) |
Sets the option for turning on/off the highlight of the vertical faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceSelectVerticalFaces faceselectverticalfaces
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceUndercutAreasColor | ( | NXOpen::NXColor * | faceUndercutAreasColor | ) |
Sets the color for applying to the undercut area faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceUndercutAreasColor faceundercutareascolor
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceUndercutEdgesColor | ( | NXOpen::NXColor * | faceUndercutEdgesColor | ) |
Sets the color for applying to the undercut edges on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceUndercutEdgesColor faceundercutedgescolor
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetFaceVerticalFacesColor | ( | NXOpen::NXColor * | faceVerticalFacesColor | ) |
Sets the color for applying to the vertical faces on the Face Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
faceVerticalFacesColor faceverticalfacescolor
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInApplyStatus | ( | int | inApplyStatus | ) |
Sets the flag that indicates the Apply status of the command, needed only in the interactive environment.
0: "Apply" has not been done before; 1: "Apply" has been done before.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
inApplyStatus inapplystatus
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationCheckScope | ( | NXOpen::Tooling::MWMoldedPartValidationBuilder::CheckScope | informationCheckScope | ) |
Sets the check scope on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationCheckScope informationcheckscope
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR01 | ( | NXOpen::NXColor * | informationColorR01 | ) |
Sets the color of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR01 informationcolorr01
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR02 | ( | NXOpen::NXColor * | informationColorR02 | ) |
Sets the color of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR02 informationcolorr02
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR03 | ( | NXOpen::NXColor * | informationColorR03 | ) |
Sets the color of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR03 informationcolorr03
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR04 | ( | NXOpen::NXColor * | informationColorR04 | ) |
Sets the color of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR04 informationcolorr04
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR05 | ( | NXOpen::NXColor * | informationColorR05 | ) |
Sets the color of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR05 informationcolorr05
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR06 | ( | NXOpen::NXColor * | informationColorR06 | ) |
Sets the color of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR06 informationcolorr06
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR07 | ( | NXOpen::NXColor * | informationColorR07 | ) |
Sets the color of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR07 informationcolorr07
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR08 | ( | NXOpen::NXColor * | informationColorR08 | ) |
Sets the color of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR08 informationcolorr08
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR09 | ( | NXOpen::NXColor * | informationColorR09 | ) |
Sets the color of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR09 informationcolorr09
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR10 | ( | NXOpen::NXColor * | informationColorR10 | ) |
Sets the color of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR10 informationcolorr10
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR11 | ( | NXOpen::NXColor * | informationColorR11 | ) |
Sets the color of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR11 informationcolorr11
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationColorR12 | ( | NXOpen::NXColor * | informationColorR12 | ) |
Sets the color of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationColorR12 informationcolorr12
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimit | ( | double | informationLowerLimit | ) |
Sets the lower limit of the range limit values on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimit informationlowerlimit
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR01 | ( | double | informationLowerLimitR01 | ) |
Sets the lower limit of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR01 informationlowerlimitr01
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR02 | ( | double | informationLowerLimitR02 | ) |
Sets the lower limit of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR02 informationlowerlimitr02
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR03 | ( | double | informationLowerLimitR03 | ) |
Sets the lower limit of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR03 informationlowerlimitr03
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR04 | ( | double | informationLowerLimitR04 | ) |
Sets the lower limit of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR04 informationlowerlimitr04
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR05 | ( | double | informationLowerLimitR05 | ) |
Sets the lower limit of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR05 informationlowerlimitr05
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR06 | ( | double | informationLowerLimitR06 | ) |
Sets the lower limit of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR06 informationlowerlimitr06
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR07 | ( | double | informationLowerLimitR07 | ) |
Sets the lower limit of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR07 informationlowerlimitr07
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR08 | ( | double | informationLowerLimitR08 | ) |
Sets the lower limit of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR08 informationlowerlimitr08
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR09 | ( | double | informationLowerLimitR09 | ) |
Sets the lower limit of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR09 informationlowerlimitr09
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR10 | ( | double | informationLowerLimitR10 | ) |
Sets the lower limit of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR10 informationlowerlimitr10
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR11 | ( | double | informationLowerLimitR11 | ) |
Sets the lower limit of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR11 informationlowerlimitr11
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationLowerLimitR12 | ( | double | informationLowerLimitR12 | ) |
Sets the lower limit of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationLowerLimitR12 informationlowerlimitr12
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationRangeType | ( | NXOpen::Tooling::MWMoldedPartValidationBuilder::RangeType | informationRangeType | ) |
Sets the range type on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationRangeType informationrangetype
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationSharpAngleLimit | ( | double | informationSharpAngleLimit | ) |
Sets the sharp angle limit on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationSharpAngleLimit informationsharpanglelimit
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowBoundaryEdges | ( | bool | informationShowBoundaryEdges | ) |
Sets the option for turning on/off the highlight of the boundary edges of the sheet body on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowBoundaryEdges informationshowboundaryedges
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR01 | ( | bool | informationShowRangeR01 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 1 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR01 informationshowranger01
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR02 | ( | bool | informationShowRangeR02 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 2 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR02 informationshowranger02
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR03 | ( | bool | informationShowRangeR03 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 3 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR03 informationshowranger03
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR04 | ( | bool | informationShowRangeR04 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 4 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR04 informationshowranger04
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR05 | ( | bool | informationShowRangeR05 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 5 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR05 informationshowranger05
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR06 | ( | bool | informationShowRangeR06 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 6 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR06 informationshowranger06
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR07 | ( | bool | informationShowRangeR07 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 7 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR07 informationshowranger07
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR08 | ( | bool | informationShowRangeR08 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 8 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR08 informationshowranger08
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR09 | ( | bool | informationShowRangeR09 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 9 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR09 informationshowranger09
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR10 | ( | bool | informationShowRangeR10 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 10 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR10 informationshowranger10
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR11 | ( | bool | informationShowRangeR11 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 11 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR11 informationshowranger11
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowRangeR12 | ( | bool | informationShowRangeR12 | ) |
Sets the option of selecting the small radius faces within the range limit values of row 12 on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowRangeR12 informationshowranger12
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationShowSharpEdges | ( | bool | informationShowSharpEdges | ) |
Sets the option for turning on/off the highlight of the sharp edges of the sheet body on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationShowSharpEdges informationshowsharpedges
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimit | ( | double | informationUpperLimit | ) |
Sets the upper limit on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimit informationupperlimit
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR01 | ( | double | informationUpperLimitR01 | ) |
Sets the upper limit of row 1 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR01 informationupperlimitr01
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR02 | ( | double | informationUpperLimitR02 | ) |
Sets the upper limit of row 2 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR02 informationupperlimitr02
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR03 | ( | double | informationUpperLimitR03 | ) |
Sets the upper limit of row 3 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR03 informationupperlimitr03
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR04 | ( | double | informationUpperLimitR04 | ) |
Sets the upper limit of row 4 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR04 informationupperlimitr04
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR05 | ( | double | informationUpperLimitR05 | ) |
Sets the upper limit of row 5 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR05 informationupperlimitr05
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR06 | ( | double | informationUpperLimitR06 | ) |
Sets the upper limit of row 6 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR06 informationupperlimitr06
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR07 | ( | double | informationUpperLimitR07 | ) |
Sets the upper limit of row 7 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR07 informationupperlimitr07
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR08 | ( | double | informationUpperLimitR08 | ) |
Sets the upper limit of row 8 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR08 informationupperlimitr08
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR09 | ( | double | informationUpperLimitR09 | ) |
Sets the upper limit of row 9 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR09 informationupperlimitr09
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR10 | ( | double | informationUpperLimitR10 | ) |
Sets the upper limit of row 10 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR10 informationupperlimitr10
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR11 | ( | double | informationUpperLimitR11 | ) |
Sets the upper limit of row 11 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR11 informationupperlimitr11
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUpperLimitR12 | ( | double | informationUpperLimitR12 | ) |
Sets the upper limit of row 12 for the small radius faces on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUpperLimitR12 informationupperlimitr12
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetInformationUseSingleTolerance | ( | bool | informationUseSingleTolerance | ) |
Sets the option for using a single tolerance for defining the range limit values on the Information Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
informationUseSingleTolerance informationusesingletolerance
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionAssignToRegionOption | ( | NXOpen::Tooling::MWMoldedPartValidationBuilder::AssignToRegion | regionAssignToRegionOption | ) |
Sets the option for assigning the selected region faces to the cavity or core region on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionAssignToRegionOption regionassigntoregionoption
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionCavityRegionColor | ( | NXOpen::NXColor * | regionCavityRegionColor | ) |
Sets the color for applying to the cavity region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionCavityRegionColor regioncavityregioncolor
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionCavityRegionTranslucency | ( | int | regionCavityRegionTranslucency | ) |
Sets the translucency for applying to the cavity region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionCavityRegionTranslucency regioncavityregiontranslucency
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionCoreRegionColor | ( | NXOpen::NXColor * | regionCoreRegionColor | ) |
Sets the color for applying to the core region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionCoreRegionColor regioncoreregioncolor
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionCoreRegionTranslucency | ( | int | regionCoreRegionTranslucency | ) |
Sets the translucency for applying to the core region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionCoreRegionTranslucency regioncoreregiontranslucency
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionSelectCrossoverRegionFaces | ( | bool | regionSelectCrossoverRegionFaces | ) |
Sets the option for including or removing the crossover region faces in the selection on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionSelectCrossoverRegionFaces regionselectcrossoverregionfaces
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionSelectCrossoverVerticalFaces | ( | bool | regionSelectCrossoverVerticalFaces | ) |
Sets the option for including or removing the crossover vertical faces in the selection on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionSelectCrossoverVerticalFaces regionselectcrossoververticalfaces
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionSelectUnknownFaces | ( | bool | regionSelectUnknownFaces | ) |
Sets the option for including or removing the unknown faces in the selection on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionSelectUnknownFaces regionselectunknownfaces
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionShowIncompleteLoops | ( | bool | regionShowIncompleteLoops | ) |
Sets the option for turning on/off the highlight of the incomplete loop edges.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionShowIncompleteLoops regionshowincompleteloops
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionShowInternalLoops | ( | bool | regionShowInternalLoops | ) |
Sets the option for turning on/off the highlight of the internal loop edges.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionShowInternalLoops regionshowinternalloops
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionShowPartingEdges | ( | bool | regionShowPartingEdges | ) |
Sets the option for turning on/off the highlight of the parting edges.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionShowPartingEdges regionshowpartingedges
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::SetRegionUndefinedRegionColor | ( | NXOpen::NXColor * | regionUndefinedRegionColor | ) |
Sets the color for applying to the undefined region faces on the Region Tab page.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
- Parameters
-
regionUndefinedRegionColor regionundefinedregioncolor
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::UpdateEjectDirection | ( | ) |
Update the eject direction.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::UpdateMpvData | ( | ) |
Update the MPV data used in performing analysis in Molded Part Validation whenever there are changes in data on dialog.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::UpdateSharpEdgesInformation | ( | ) |
Update the sharp edges information based on the new sharp angle limit which has been changed by the user.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
| void NXOpen::Tooling::MWMoldedPartValidationBuilder::UpdateSmallRadiusFacesInformation | ( | ) |
Update the small radius faces information based on the new range limits of the radius which has been changed by the user.
Created in NX8.0.0.
License requirements : ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
The documentation for this class was generated from the following file:
- Tooling_MWMoldedPartValidationBuilder.hxx