Represents a Lower Binder builder
To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateDieDesignLowerBinderBuilder
Created in NX9.0.0.
More...
Public Member Functions | |
| NXOpen::Plane * | BasePlane () |
| Returns the base plane used to create Lower Binder Created in NX9.0.0. More... | |
| NXOpen::SelectNXObjectList * | BinderProfiles () |
| Returns the binder profiles used to create Lower Binder Created in NX9.0.0. More... | |
| double | BinderRelief () |
| Returns the binder relief Created in NX9.0.0. More... | |
| NXOpen::SelectNXObjectList * | BlankProfile () |
| Returns the blank profile used to create Lower Binder Created in NX9.0.0. More... | |
| double | BlankProfileOffset () |
| Returns the blank profile offset Created in NX9.0.0. More... | |
| int | CoreDirection () |
| Returns the core direction determines the direction of Lower Binder Created in NX9.0.0. More... | |
| NXOpen::SelectNXObjectList * | DeckProfile () |
| Returns the deck profile used to create Lower Binder Created in NX9.0.0. More... | |
| bool | IsApproxSheetBody () |
| Returns the exact sheet determines whether to use machine allowance Created in NX9.0.0. More... | |
| bool | IsExactBinderProfiles () |
| Returns the exact binder profiles determines whether to use offset value Created in NX9.0.0. More... | |
| double | LowerDeckThickness () |
| Returns the lower deck thickness Created in NX9.0.0. More... | |
| double | MachineAllowance () |
| Returns the machine allowance Created in NX9.0.0. More... | |
| double | OffsetValue () |
| Returns the offset value Created in NX9.0.0. More... | |
| NXOpen::SelectNXObjectList * | OutterWallProfile () |
| Returns the inner profile used in Lower Binder, it is optional Created in NX9.0.0. More... | |
| double | OutWallThickness () |
| Returns the out wall thickness Created in NX9.0.0. More... | |
| void | SetApproxSheetBody (bool isExactSheet) |
| Sets the exact sheet determines whether to use machine allowance Created in NX9.0.0. More... | |
| void | SetBasePlane (NXOpen::Plane *basePlane) |
| Sets the base plane used to create Lower Binder Created in NX9.0.0. More... | |
| void | SetBinderRelief (double binderRelief) |
| Sets the binder relief Created in NX9.0.0. More... | |
| void | SetBlankProfileOffset (double blankProfileOffset) |
| Sets the blank profile offset Created in NX9.0.0. More... | |
| void | SetCoreDirection (int coreDirection) |
| Sets the core direction determines the direction of Lower Binder Created in NX9.0.0. More... | |
| void | SetExactBinderProfiles (bool isExactBinderProfiles) |
| Sets the exact binder profiles determines whether to use offset value Created in NX9.0.0. More... | |
| void | SetLowerDeckThickness (double lowerDeckThickness) |
| Sets the lower deck thickness Created in NX9.0.0. More... | |
| void | SetMachineAllowance (double machineAllowance) |
| Sets the machine allowance Created in NX9.0.0. More... | |
| void | SetOffsetValue (double offsetValue) |
| Sets the offset value Created in NX9.0.0. More... | |
| void | SetOutWallThickness (double outWallThickness) |
| Sets the out wall thickness Created in NX9.0.0. More... | |
| void | SetUpperDeckRelief (double upperDeckRelief) |
| Sets the upper deck relief Created in NX9.0.0. More... | |
| void | SetUpperDeckThickness (double upperDeckThickness) |
| Sets the upper deck thickness Created in NX9.0.0. More... | |
| void | SetWallThickness (double wallThickness) |
| Sets the wall thickness Created in NX9.0.0. More... | |
| NXOpen::SelectBody * | SheetBody () |
| Returns the sheet body used as sheet metal product Created in NX9.0.0. More... | |
| NXOpen::SelectBody * | UpperDeckOffsetSheet () |
| Returns the upper deck offset sheet used in Lower Binder, it is optional Created in NX9.0.0. More... | |
| double | UpperDeckRelief () |
| Returns the upper deck relief Created in NX9.0.0. More... | |
| NXOpen::SelectBody * | UpperDeckReliefSheet () |
| Returns the upper deck relief sheet used in Lower Binder, it is optional Created in NX9.0.0. More... | |
| double | UpperDeckThickness () |
| Returns the upper deck thickness Created in NX9.0.0. More... | |
| double | WallThickness () |
| Returns the wall thickness Created in NX9.0.0. More... | |
 Public Member Functions inherited from NXOpen::Builder | |
| NXOpen::NXObject * | Commit () |
| Commits any edits that have been applied to the builder. More... | |
| void | Destroy () |
| Deletes the builder, and cleans up any objects created by the builder. More... | |
| std::vector< NXOpen::NXObject * > | GetCommittedObjects () |
| For builders that create more than one object, this method returns the objects that are created by commit. More... | |
| NXOpen::NXObject * | GetObject () |
| Returns the object currently being edited by this builder. More... | |
| void | ShowResults () |
| Updates the model to reflect the result of an edit to the model for all builders that support showing results. More... | |
| virtual bool | Validate () |
| Validate whether the inputs to the component are sufficient for commit to be called. More... | |
| Public Member Functions inherited from NXOpen::TaggedObject | |
| tag_t | Tag () const |
| Returns the tag of this object. More... | |
Detailed Description
Represents a Lower Binder builder
To create a new instance of this class, use NXOpen::Tooling::AutoDieCollection::CreateDieDesignLowerBinderBuilder
Created in NX9.0.0.
Member Function Documentation
| NXOpen::Plane* NXOpen::Tooling::DieDesignLowerBinderBuilder::BasePlane | ( | ) |
Returns the base plane used to create Lower Binder
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| NXOpen::SelectNXObjectList* NXOpen::Tooling::DieDesignLowerBinderBuilder::BinderProfiles | ( | ) |
Returns the binder profiles used to create Lower Binder
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::BinderRelief | ( | ) |
Returns the binder relief
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| NXOpen::SelectNXObjectList* NXOpen::Tooling::DieDesignLowerBinderBuilder::BlankProfile | ( | ) |
Returns the blank profile used to create Lower Binder
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::BlankProfileOffset | ( | ) |
Returns the blank profile offset
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| int NXOpen::Tooling::DieDesignLowerBinderBuilder::CoreDirection | ( | ) |
Returns the core direction determines the direction of Lower Binder
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| NXOpen::SelectNXObjectList* NXOpen::Tooling::DieDesignLowerBinderBuilder::DeckProfile | ( | ) |
Returns the deck profile used to create Lower Binder
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| bool NXOpen::Tooling::DieDesignLowerBinderBuilder::IsApproxSheetBody | ( | ) |
Returns the exact sheet determines whether to use machine allowance
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| bool NXOpen::Tooling::DieDesignLowerBinderBuilder::IsExactBinderProfiles | ( | ) |
Returns the exact binder profiles determines whether to use offset value
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::LowerDeckThickness | ( | ) |
Returns the lower deck thickness
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::MachineAllowance | ( | ) |
Returns the machine allowance
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::OffsetValue | ( | ) |
Returns the offset value
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| NXOpen::SelectNXObjectList* NXOpen::Tooling::DieDesignLowerBinderBuilder::OutterWallProfile | ( | ) |
Returns the inner profile used in Lower Binder, it is optional
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::OutWallThickness | ( | ) |
Returns the out wall thickness
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetApproxSheetBody | ( | bool | isExactSheet | ) |
Sets the exact sheet determines whether to use machine allowance
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
isExactSheet isexactsheet
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetBasePlane | ( | NXOpen::Plane * | basePlane | ) |
Sets the base plane used to create Lower Binder
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
basePlane baseplane
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetBinderRelief | ( | double | binderRelief | ) |
Sets the binder relief
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
binderRelief binderrelief
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetBlankProfileOffset | ( | double | blankProfileOffset | ) |
Sets the blank profile offset
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
blankProfileOffset blankprofileoffset
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetCoreDirection | ( | int | coreDirection | ) |
Sets the core direction determines the direction of Lower Binder
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
coreDirection coredirection
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetExactBinderProfiles | ( | bool | isExactBinderProfiles | ) |
Sets the exact binder profiles determines whether to use offset value
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
isExactBinderProfiles isexactbinderprofiles
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetLowerDeckThickness | ( | double | lowerDeckThickness | ) |
Sets the lower deck thickness
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
lowerDeckThickness lowerdeckthickness
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetMachineAllowance | ( | double | machineAllowance | ) |
Sets the machine allowance
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
machineAllowance machineallowance
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetOffsetValue | ( | double | offsetValue | ) |
Sets the offset value
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
offsetValue offsetvalue
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetOutWallThickness | ( | double | outWallThickness | ) |
Sets the out wall thickness
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
outWallThickness outwallthickness
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetUpperDeckRelief | ( | double | upperDeckRelief | ) |
Sets the upper deck relief
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
upperDeckRelief upperdeckrelief
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetUpperDeckThickness | ( | double | upperDeckThickness | ) |
Sets the upper deck thickness
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
upperDeckThickness upperdeckthickness
| void NXOpen::Tooling::DieDesignLowerBinderBuilder::SetWallThickness | ( | double | wallThickness | ) |
Sets the wall thickness
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
- Parameters
-
wallThickness wallthickness
| NXOpen::SelectBody* NXOpen::Tooling::DieDesignLowerBinderBuilder::SheetBody | ( | ) |
Returns the sheet body used as sheet metal product
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| NXOpen::SelectBody* NXOpen::Tooling::DieDesignLowerBinderBuilder::UpperDeckOffsetSheet | ( | ) |
Returns the upper deck offset sheet used in Lower Binder, it is optional
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::UpperDeckRelief | ( | ) |
Returns the upper deck relief
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| NXOpen::SelectBody* NXOpen::Tooling::DieDesignLowerBinderBuilder::UpperDeckReliefSheet | ( | ) |
Returns the upper deck relief sheet used in Lower Binder, it is optional
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::UpperDeckThickness | ( | ) |
Returns the upper deck thickness
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
| double NXOpen::Tooling::DieDesignLowerBinderBuilder::WallThickness | ( | ) |
Returns the wall thickness
Created in NX9.0.0.
License requirements : ug_die_design ("Die Design")
The documentation for this class was generated from the following file:
- Tooling_DieDesignLowerBinderBuilder.hxx