NXOpen::CAM::WedmCutParameters Class Reference

Represents a NXOpen::CAM::WedmCutParameters. More...

Inheritance diagram for NXOpen::CAM::WedmCutParameters:

Public Types
enum	CutDirectionTypes { CutDirectionTypesAlternate, CutDirectionTypesClockwise, CutDirectionTypesCounterClockwise }
	the types available for wedm cut direction Created in NX7.5.0. More...
enum	WirePositionTypes { WirePositionTypesOn, WirePositionTypesTanto }
	the types available for wire position Created in NX7.5.0. More...

Public Member Functions
NXOpen::CAM::WedmCutParameters::CutDirectionTypes	CutDirection ()
	Returns the Cut Direction Created in NX7.5.0. More...
double	Intol ()
	Returns the intol value Created in NX7.5.0. More...
NXOpen::CAM::InheritableDoubleBuilder *	LowerGuideOffset ()
	Returns the lower guide offset Created in NX9.0.0. More...
NXOpen::CAM::InheritableDoubleBuilder *	LowerPlaneBuilder ()
	Returns the lower_plane builder Created in NX7.5.0. More...
double	Outtol ()
	Returns the outtol value Created in NX7.5.0. More...
NXOpen::CAM::InheritableDoubleBuilder *	OverlapDistanceBuilder ()
	Returns the overlap_distance_builder Created in NX7.5.0. More...
void	SetCutDirection (NXOpen::CAM::WedmCutParameters::CutDirectionTypes cutDirection)
	Sets the Cut Direction Created in NX7.5.0. More...
void	SetIntol (double intol)
	Sets the intol value Created in NX7.5.0. More...
void	SetOuttol (double outtol)
	Sets the outtol value Created in NX7.5.0. More...
void	SetWirePosition (NXOpen::CAM::WedmCutParameters::WirePositionTypes wirePosition)
	Sets the wire position Created in NX7.5.0. More...
NXOpen::CAM::InheritableDoubleBuilder *	UpperGuideOffset ()
	Returns the upper guide offset Created in NX9.0.0. More...
NXOpen::CAM::InheritableDoubleBuilder *	UpperPlaneBuilder ()
	Returns the upper_plane builder Created in NX7.5.0. More...
NXOpen::CAM::StepoverBuilder *	WedmStepoverBuilder ()
	Returns the WedmStepover builder Created in NX7.5.0. More...
NXOpen::CAM::InheritableDoubleBuilder *	WireDiameterBuilder ()
	Returns the wire_diameter builder Created in NX7.5.0. More...
NXOpen::CAM::WedmCutParameters::WirePositionTypes	WirePosition ()
	Returns the wire position Created in NX7.5.0. More...
Public Member Functions inherited from NXOpen::CAM::CutParameters
bool	CheckIpwCollisions ()
	Returns the value to Check for Ipw Collsions Created in NX6.0.0. More...
NXOpen::CAM::InheritableToolDepBuilder *	CheckSafeClearance ()
	Returns the Check Safe Clearance Created in NX6.0.0. More...
NXOpen::CAM::InheritableToolDepBuilder *	HolderClearance ()
	Returns the Holder Clearance Created in NX8.0.0. More...
NXOpen::CAM::CutParametersIpwTypes	IpwType ()
	Returns the IPW type Created in NX6.0.0. More...
NXOpen::CAM::InheritableToolDepBuilder *	NeckClearance ()
	Returns the Neck Clearance Created in NX8.0.0. More...
NXOpen::CAM::InheritableToolDepBuilder *	PartSafeClearance ()
	Returns the Part Safe Clearance More...
NXOpen::CAM::InheritableDoubleBuilder *	PartStock ()
	Returns the part stock Created in NX6.0.0. More...
void	SetCheckIpwCollisions (bool flag)
	Sets the value to Check for Ipw Collsions Created in NX6.0.0. More...
void	SetIpwType (NXOpen::CAM::CutParametersIpwTypes propValue)
	Sets the IPW type Created in NX6.0.0. More...
void	SetUseToolHolder (bool propValue)
	Sets the use tool holder Created in NX6.0.0. More...
NXOpen::CAM::InheritableToolDepBuilder *	ShankClearance ()
	Returns the Shank Clearance Created in NX8.0.0. More...
NXOpen::CAM::Inheritable2dLength *	Tolerances ()
	Returns the Tolerances builder Created in NX7.5.0. More...
bool	UseToolHolder ()
	Returns the use tool holder Created in NX6.0.0. More...
Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a NXOpen::CAM::WedmCutParameters.

Created in NX7.5.0.

Member Enumeration Documentation

enum NXOpen::CAM::WedmCutParameters::CutDirectionTypes

the types available for wedm cut direction
Created in NX7.5.0.

Enumerator
CutDirectionTypesAlternate	alternating cut direction
CutDirectionTypesClockwise	clockwise cut direction
CutDirectionTypesCounterClockwise	counter clockwise cut direction

enum NXOpen::CAM::WedmCutParameters::WirePositionTypes

the types available for wire position
Created in NX7.5.0.

Enumerator
WirePositionTypesOn	drive on
WirePositionTypesTanto	drive tanto

Member Function Documentation

NXOpen::CAM::WedmCutParameters::CutDirectionTypes NXOpen::CAM::WedmCutParameters::CutDirection

(

)

Returns the Cut Direction
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

double NXOpen::CAM::WedmCutParameters::Intol

(

)

Returns the intol value
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::WedmCutParameters::LowerGuideOffset

(

)

Returns the lower guide offset
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::WedmCutParameters::LowerPlaneBuilder

(

)

Returns the lower_plane builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

double NXOpen::CAM::WedmCutParameters::Outtol

(

)

Returns the outtol value
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::WedmCutParameters::OverlapDistanceBuilder

(

)

Returns the overlap_distance_builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

void NXOpen::CAM::WedmCutParameters::SetCutDirection

(

NXOpen::CAM::WedmCutParameters::CutDirectionTypes

cutDirection

)

Sets the Cut Direction
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

cutDirection

the Cut Direction

void NXOpen::CAM::WedmCutParameters::SetIntol

(

double

intol

)

Sets the intol value
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

intol

the intol value

void NXOpen::CAM::WedmCutParameters::SetOuttol

(

double

outtol

)

Sets the outtol value
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

outtol

the outol value

void NXOpen::CAM::WedmCutParameters::SetWirePosition

(

NXOpen::CAM::WedmCutParameters::WirePositionTypes

wirePosition

)

Sets the wire position
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

wirePosition

the wire position

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::WedmCutParameters::UpperGuideOffset

(

)

Returns the upper guide offset
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::WedmCutParameters::UpperPlaneBuilder

(

)

Returns the upper_plane builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::StepoverBuilder* NXOpen::CAM::WedmCutParameters::WedmStepoverBuilder

(

)

Returns the WedmStepover builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::WedmCutParameters::WireDiameterBuilder

(

)

Returns the wire_diameter builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::WedmCutParameters::WirePositionTypes NXOpen::CAM::WedmCutParameters::WirePosition

(

)

Returns the wire position
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

---

The documentation for this class was generated from the following file:

• CAM_WedmCutParameters.hxx