Represents a cam preferences Builder
To create a new instance of this class, use NXOpen::CAM::CAMSession::CreateCamPreferences

Created in NX7.5.0. More...

Inheritance diagram for NXOpen::CAM::Preferences:

Public Types
enum	AnimationAccuracyTypes { AnimationAccuracyTypesFine, AnimationAccuracyTypesCoarse }
	the animation accuracy types More...

enum	AuxiliaryFloorColorSelectionTypes { AuxiliaryFloorColorSelectionTypesBodies, AuxiliaryFloorColorSelectionTypesFaces, AuxiliaryFloorColorSelectionTypesSurfaceRegion }
	the auxiliary floor selection types. More...

enum	BlankSelectionTypes { BlankSelectionTypesBodies, BlankSelectionTypesFaces, BlankSelectionTypesCurves, BlankSelectionTypesSurfaceRegion, BlankSelectionTypesFacetedBodies }
	the blank selection types. More...

enum	CheckSelectionTypes { CheckSelectionTypesBodies, CheckSelectionTypesFaces, CheckSelectionTypesCurves }
	the check selection types. More...

enum	CsysInformationListingTypes { CsysInformationListingTypesWcs, CsysInformationListingTypesMcs }
	the information listing types More...

enum	CutAreaSelectionTypes { CutAreaSelectionTypesBodies, CutAreaSelectionTypesFaces, CutAreaSelectionTypesSurfaceRegion }
	the cut area selection types. More...

enum	GeometryTypes { GeometryTypesPart, GeometryTypesBlank, GeometryTypesCheck, GeometryTypesCutArea, GeometryTypesAuxiliaryFloor, GeometryTypesWalls, GeometryTypesSurfaceAreaDrive }
	the geometry types More...

enum	IpwDmrColoringTypes { IpwDmrColoringTypesOff, IpwDmrColoringTypesPerTool, IpwDmrColoringTypesPerOperation }
	the IPW material removal coloring types More...

enum	IpwToleranceModeTypes { IpwToleranceModeTypesNeedleDistance, IpwToleranceModeTypesNeedleCount }
	the IPW tolerance modes More...

enum	PartSelectionTypes { PartSelectionTypesBodies, PartSelectionTypesFaces, PartSelectionTypesCurves, PartSelectionTypesSurfaceRegion, PartSelectionTypesFacetedBodies }
	the part selection types. More...

enum	SelectionTypes { SelectionTypesNoSelectionFilter, SelectionTypesCurves, SelectionTypesEdges, SelectionTypesFaces, SelectionTypesFeature, SelectionTypesSolidBodies, SelectionTypesSheetBodies, SelectionTypesFacetBodies, SelectionTypesGroups, SelectionTypesSurfaceRegionFeatures }
	the selection types More...

enum	WallSelectionTypes { WallSelectionTypesBodies, WallSelectionTypesFaces, WallSelectionTypesSurfaceRegion }
	the wall selection types. More...

Public Member Functions
bool	AlwaysUpdateDialogs ()
	Returns the auto update dialog Created in NX7.5.0. More...

bool	AutomaticallySetMachingData ()
	Returns the auto maching data Created in NX7.5.0. More...

NXOpen::NXColor *	AuxiliaryFloorColor ()
	Returns the auxiliary floor Created in NX7.5.0. More...

NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes	AuxiliaryFloorColorSelection ()
	Returns the auxiliary floor selection. More...

NXOpen::NXColor *	BladeBlendColor ()
	Returns the blade blend color Created in NX8.0.0. More...

NXOpen::NXColor *	BladeColor ()
	Returns the blade color Created in NX8.0.0. More...

NXOpen::NXColor *	BlankColor ()
	Returns the blank color Created in NX7.5.0. More...

NXOpen::CAM::Preferences::BlankSelectionTypes	BlankSelection ()
	Returns the blank selection. More...

NXOpen::NXColor *	CheckColor ()
	Returns the check color Created in NX7.5.0. More...

NXOpen::CAM::Preferences::CheckSelectionTypes	CheckSelection ()
	Returns the check selection. More...

NXOpen::NXColor *	ClearanceColor ()
	Returns the clearance color Created in NX7.5.0. More...

int	ClsfDecimals ()
	Returns the clsf_decimals Created in NX7.5.0. More...

bool	ClsfForceLoadTurret ()
	Returns the force load turret Created in NX7.5.0. More...

NXString	ConfigurationFile ()
	Returns the configuration file Created in NX7.5.0. More...

NXOpen::CAM::Preferences::CsysInformationListingTypes	CsysInformationListing ()
	Returns the base info Created in NX7.5.0. More...

bool	CsysOrientWcsToMcs ()
	Returns the orient wcs to mcs Created in NX7.5.0. More...

NXOpen::NXColor *	CutAreaColor ()
	Returns the cut area color Created in NX7.5.0. More...

NXOpen::CAM::Preferences::CutAreaSelectionTypes	CutAreaSelection ()
	Returns the cut area selection. More...

bool	DisplaySelectedObjects ()
	Returns the display selected objects Created in NX7.5.0. More...

bool	DisplayTurningIpw ()
	Returns the display turning ipw Created in NX7.5.0. More...

NXOpen::NXColor *	DriveColor ()
	Returns the drive color Created in NX7.5.0. More...

bool	EnableLevelBasedIpw ()
	Returns the enable level based ipw Created in NX7.5.0. More...

bool	ForceRegenerate ()
	Returns the force regenerate Created in NX10.0.3. More...

bool	GeneratePaths ()
	Returns the generate tool paths Created in NX7.5.0. More...

bool	GenerationFullRegeneration ()
	Returns the full regeneration More...

bool	GenerationPauseAfterEachPath ()
	Returns the pause after each path Created in NX7.5.0. More...

bool	GenerationRefreshBeforeEachPath ()
	Returns the refresh before each path Created in NX7.5.0. More...

bool	GenerationSmartRegeneration ()
	Returns the smart regeneration Created in NX10.0.3. More...

bool	GenerationUpdateInstances ()
	Returns the update all instances Created in NX7.5.0. More...

NXString	GetDefaultConfigurationFile ()
	Get the default configuration file. More...

NXString	GetDefaultIpwFolder ()
	Get the ipw default folder. More...

NXString	GetDefaultTemplateFile ()
	Get the default template file. More...

NXOpen::CAM::Preferences::SelectionTypes	GetSelection (NXOpen::CAM::Preferences::GeometryTypes geomType)
	The geometry selection type method. More...

NXOpen::NXColor *	HubColor ()
	Returns the hub color Created in NX8.0.0. More...

bool	IncludeInstances ()
	Returns the include instances Created in NX7.5.0. More...

int	IpwNeedleCountCoarse ()
	Returns the coarse ipw needle count Created in NX9.0.3. More...

int	IpwNeedleCountFine ()
	Returns the fine ipw needle count Created in NX9.0.3. More...

int	IpwNeedleCountMedium ()
	Returns the medium ipw needle count Created in NX9.0.3. More...

double	IpwNeedleDistanceCoarse ()
	Returns the coarse ipw needle distance Created in NX9.0.3. More...

double	IpwNeedleDistanceFine ()
	Returns the fine ipw needle distance Created in NX9.0.3. More...

double	IpwNeedleDistanceMedium ()
	Returns the medium ipw needle distance Created in NX9.0.3. More...

NXString	IpwPartsFolder ()
	Returns the ipw parts folder Created in NX7.5.0. More...

NXOpen::CAM::Preferences::IpwToleranceModeTypes	IpwToleranceMode ()
	Returns the ipw tolerance mode Created in NX9.0.3. More...

bool	IpwUseDirectoryOfOriginalPart ()
	Returns the use directory original part Created in NX7.5.0. More...

bool	LinkMcsRcs ()
	Returns the link mcs rcs Created in NX7.5.0. More...

NXOpen::NXColor *	OptimizedCutLevelColor ()
	Returns the optimized cut level Created in NX7.5.0. More...

NXOpen::NXColor *	PartColor ()
	Returns the part color Created in NX7.5.0. More...

NXOpen::CAM::Preferences::PartSelectionTypes	PartSelection ()
	Returns the part selection. More...

bool	RelocateParameters ()
	Returns the relocate parameters Created in NX7.5.0. More...

bool	ReplayRefreshBeforeEachPath ()
	Returns the refresh before each path replay Created in NX7.5.0. More...

bool	RunProcessAssistant ()
	Returns the process assistant Created in NX7.5.0. More...

bool	SaveIpwModel ()
	Returns the ipw model Created in NX7.5.0. More...

bool	SaveLevelBasedIpw ()
	Returns the level based ipw Created in NX7.5.0. More...

int	ScrollAreaSize ()
	Returns the scrollable items Created in NX7.5.0. More...

void	SetAlwaysUpdateDialogs (bool alwaysUpdateDialogs)
	Sets the auto update dialog Created in NX7.5.0. More...

void	SetAutomaticallySetMachingData (bool autoMachingData)
	Sets the auto maching data Created in NX7.5.0. More...

void	SetAuxiliaryFloorColor (NXOpen::NXColor *auxiliaryFloor)
	Sets the auxiliary floor Created in NX7.5.0. More...

void	SetAuxiliaryFloorColorSelection (NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes auxiliaryFloorSelection)
	Sets the auxiliary floor selection. More...

void	SetBladeBlendColor (NXOpen::NXColor *bladeBlend)
	Sets the blade blend color Created in NX8.0.0. More...

void	SetBladeColor (NXOpen::NXColor *blade)
	Sets the blade color Created in NX8.0.0. More...

void	SetBlankColor (NXOpen::NXColor *blankColor)
	Sets the blank color Created in NX7.5.0. More...

void	SetBlankSelection (NXOpen::CAM::Preferences::BlankSelectionTypes blankSelection)
	Sets the blank selection. More...

void	SetCheckColor (NXOpen::NXColor *checkColor)
	Sets the check color Created in NX7.5.0. More...

void	SetCheckSelection (NXOpen::CAM::Preferences::CheckSelectionTypes checkSelection)
	Sets the check selection. More...

void	SetClearanceColor (NXOpen::NXColor *clearanceColor)
	Sets the clearance color Created in NX7.5.0. More...

void	SetClsfDecimals (int decimals)
	Sets the clsf_decimals Created in NX7.5.0. More...

void	SetClsfForceLoadTurret (bool forceLoadTurret)
	Sets the force load turret Created in NX7.5.0. More...

void	SetConfigurationFile (const NXString &fileName)
	Sets the configuration file Created in NX7.5.0. More...

void	SetConfigurationFile (const char *fileName)
	Sets the configuration file Created in NX7.5.0. More...

void	SetCsysInformationListing (NXOpen::CAM::Preferences::CsysInformationListingTypes baseInfo)
	Sets the base info Created in NX7.5.0. More...

void	SetCsysOrientWcsToMcs (bool orientWcsToMcs)
	Sets the orient wcs to mcs Created in NX7.5.0. More...

void	SetCutAreaColor (NXOpen::NXColor *cutAreaColor)
	Sets the cut area color Created in NX7.5.0. More...

void	SetCutAreaSelection (NXOpen::CAM::Preferences::CutAreaSelectionTypes cutAreaSelection)
	Sets the cut area selection. More...

void	SetDisplaySelectedObjects (bool displaySelectedObjects)
	Sets the display selected objects Created in NX7.5.0. More...

void	SetDisplayTurningIpw (bool displayTurningIpw)
	Sets the display turning ipw Created in NX7.5.0. More...

void	SetDriveColor (NXOpen::NXColor *driveColor)
	Sets the drive color Created in NX7.5.0. More...

void	SetEnableLevelBasedIpw (bool enableLevelBasedIpw)
	Sets the enable level based ipw Created in NX7.5.0. More...

void	SetForceRegenerate (bool isForceRegenerate)
	Sets the force regenerate Created in NX10.0.3. More...

void	SetGeneratePaths (bool generatePaths)
	Sets the generate tool paths Created in NX7.5.0. More...

void	SetGenerationFullRegeneration (bool fullRegeneration)
	Sets the full regeneration More...

void	SetGenerationPauseAfterEachPath (bool pauseAfterEachPath)
	Sets the pause after each path Created in NX7.5.0. More...

void	SetGenerationRefreshBeforeEachPath (bool refreshBeforeEachPath)
	Sets the refresh before each path Created in NX7.5.0. More...

void	SetGenerationSmartRegeneration (bool smartRegeneration)
	Sets the smart regeneration Created in NX10.0.3. More...

void	SetGenerationUpdateInstances (bool updateInstances)
	Sets the update all instances Created in NX7.5.0. More...

void	SetHubColor (NXOpen::NXColor *hub)
	Sets the hub color Created in NX8.0.0. More...

void	SetIncludeInstances (bool includeInstances)
	Sets the include instances Created in NX7.5.0. More...

void	SetIpwNeedleCountCoarse (int count)
	Sets the coarse ipw needle count Created in NX9.0.3. More...

void	SetIpwNeedleCountFine (int count)
	Sets the fine ipw needle count Created in NX9.0.3. More...

void	SetIpwNeedleCountMedium (int count)
	Sets the medium ipw needle count Created in NX9.0.3. More...

void	SetIpwNeedleDistanceCoarse (double distance)
	Sets the coarse ipw needle distance Created in NX9.0.3. More...

void	SetIpwNeedleDistanceFine (double distance)
	Sets the fine ipw needle distance Created in NX9.0.3. More...

void	SetIpwNeedleDistanceMedium (double distance)
	Sets the medium ipw needle distance Created in NX9.0.3. More...

void	SetIpwPartsFolder (const NXString &foldername)
	Sets the ipw parts folder Created in NX7.5.0. More...

void	SetIpwPartsFolder (const char *foldername)
	Sets the ipw parts folder Created in NX7.5.0. More...

void	SetIpwToleranceMode (NXOpen::CAM::Preferences::IpwToleranceModeTypes mode)
	Sets the ipw tolerance mode Created in NX9.0.3. More...

void	SetIpwUseDirectoryOfOriginalPart (bool useIpwDirectoryOfOriginalPart)
	Sets the use directory original part Created in NX7.5.0. More...

void	SetLinkMcsRcs (bool linkMcsRcs)
	Sets the link mcs rcs Created in NX7.5.0. More...

void	SetOptimizedCutLevelColor (NXOpen::NXColor *optimizedCutLevel)
	Sets the optimized cut level Created in NX7.5.0. More...

void	SetPartColor (NXOpen::NXColor *partColor)
	Sets the part color Created in NX7.5.0. More...

void	SetPartSelection (NXOpen::CAM::Preferences::PartSelectionTypes partSelection)
	Sets the part selection. More...

void	SetRelocateParameters (bool relocateParameters)
	Sets the relocate parameters Created in NX7.5.0. More...

void	SetReplayRefreshBeforeEachPath (bool refreshBeforeEachPath)
	Sets the refresh before each path replay Created in NX7.5.0. More...

void	SetRunProcessAssistant (bool processAssistant)
	Sets the process assistant Created in NX7.5.0. More...

void	SetSaveIpwModel (bool ipwModel)
	Sets the ipw model Created in NX7.5.0. More...

void	SetSaveLevelBasedIpw (bool levelBasedIpw)
	Sets the level based ipw Created in NX7.5.0. More...

void	SetScrollAreaSize (int scrollableItems)
	Sets the scrollable items Created in NX7.5.0. More...

void	SetSelection (NXOpen::CAM::Preferences::GeometryTypes geomType, NXOpen::CAM::Preferences::SelectionTypes selection)
	The geometry selection type method Created in NX8.0.0. More...

void	SetShowPictures (bool showPictures)
	Sets the show pictures Created in NX7.5.0. More...

void	SetShroudColor (NXOpen::NXColor *shroud)
	Sets the shroud color Created in NX8.0.0. More...

void	SetSplitterColor (NXOpen::NXColor *splitter)
	Sets the splitter color Created in NX8.0.0. More...

void	SetStepoverDisplayAsNCM (bool bStepOverAsNCM)
	Sets the stepover move display as non cutting move Created in NX11.0.2. More...

void	SetSuspectBoundingBoxColor (NXOpen::NXColor *suspectBoundingBoxColor)
	Sets the suspect bounding box color Created in NX7.5.0. More...

void	SetTemplateFile (const NXString &fileName)
	Sets the template file Created in NX7.5.0. More...

void	SetTemplateFile (const char *fileName)
	Sets the template file Created in NX7.5.0. More...

void	SetTopOffLevelColor (NXOpen::NXColor *topOffLevel)
	Sets the top off level Created in NX7.5.0. More...

void	SetTrimColor (NXOpen::NXColor *trimColor)
	Sets the trim color Created in NX7.5.0. More...

void	SetUncutRegionColor (NXOpen::NXColor *uncutRegionColor)
	Sets the uncut region color Created in NX7.5.0. More...

void	SetUnlinkInstances (bool unlinkInstances)
	Sets the unlink instances Created in NX7.5.0. More...

void	SetVisualize2dTool1Color (NXOpen::NXColor *toolColor)
	Sets the tool color1 More...

void	SetVisualize2dTool2Color (NXOpen::NXColor *toolColor)
	Sets the tool color2 More...

void	SetVisualize2dTool3Color (NXOpen::NXColor *toolColor)
	Sets the tool color3 More...

void	SetVisualize2dTool4Color (NXOpen::NXColor *toolColor)
	Sets the tool color4 More...

void	SetVisualize2dTool5Color (NXOpen::NXColor *toolColor)
	Sets the tool color5 More...

void	SetVisualizeAnimationAccuracy (NXOpen::CAM::Preferences::AnimationAccuracyTypes animationAccuracy)
	Sets the animation accuracy Created in NX7.5.0. More...

void	SetVisualizeAutoBlockColor (NXOpen::NXColor *autoBlockColor)
	Sets the auto block color More...

void	SetVisualizeBackgroundColor (NXOpen::NXColor *backgroundColor)
	Sets the background color Created in NX7.5.0. More...

void	SetVisualizeChordalTolerance (double chordalTolerance)
	Sets the chordal tolerance Created in NX7.5.0. More...

void	SetVisualizeCollisionsColor (NXOpen::NXColor *collisionsColor)
	Sets the collisions color Created in NX7.5.0. More...

void	SetVisualizeDynamicToolAxis (bool dynToolAxis)
	Sets the dynamic tool axis Created in NX8.0.0. More...

void	SetVisualizeExcessMaterialColor (NXOpen::NXColor *excessMaterialColor)
	Sets the excess material color Created in NX7.5.0. More...

void	SetVisualizeGougesColor (NXOpen::NXColor *gougesColor)
	Sets the gouges color Created in NX7.5.0. More...

void	SetVisualizeIpwColor (NXOpen::NXColor *ipwColor)
	Sets the ipw color Created in NX7.5.0. More...

void	SetVisualizeIpwDmrColor1 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color1 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor10 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color10 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor2 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color2 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor3 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color3 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor4 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color4 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor5 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color5 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor6 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color6 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor7 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color7 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor8 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color8 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColor9 (NXOpen::NXColor *ipwColor)
	Sets the ipw dmr color9 Created in NX9.0.0. More...

void	SetVisualizeIpwDmrColoringMode (NXOpen::CAM::Preferences::IpwDmrColoringTypes coloring)
	Sets the ipw dmr coloring mode Created in NX9.0.0. More...

void	SetVisualizeIpwTranslucency (int ipwTranslucency)
	Sets the ipw translucency Created in NX7.5.0. More...

void	SetVisualizeSafeToolColor (NXOpen::NXColor *safeToolColor)
	Sets the safe tool color Created in NX7.5.2. More...

void	SetVisualizeTemporaryContainmentCurveColor (NXOpen::NXColor *temporaryContainmentCurveColor)
	Sets the temporary containment curve color Created in NX7.5.0. More...

void	SetVisualizeToolAxisTiltTolerance (double tiltTolerance)
	Sets the tilt tolerance Created in NX7.5.0. More...

void	SetVisualizeToolDisplayColor (NXOpen::NXColor *toolDisplayColor)
	Sets the tool display color Created in NX7.5.0. More...

void	SetVisualizeToolEditAndDisplay (bool toolDisplayColor)
	Sets the tool edit and display Created in NX8.0.0. More...

void	SetVisualizeToolHolderColor (NXOpen::NXColor *holderColor)
	Sets the tool holder color Created in NX8.0.0. More...

void	SetVisualizeToolInsertOrFluteColor (NXOpen::NXColor *color)
	Sets the turning tool insert Created in NX7.5.0. More...

void	SetVisualizeToolShankColor (NXOpen::NXColor *shankColor)
	Sets the tool shank color Created in NX8.0.0. More...

void	SetVisualizeToolTranslucency (int toolTranslucency)
	Sets the tool translucency Created in NX8.0.0. More...

void	SetWallColor (NXOpen::NXColor *wallColor)
	Sets the wall color Created in NX7.5.0. More...

void	SetWallSelection (NXOpen::CAM::Preferences::WallSelectionTypes wallSelection)
	Sets the wall selection. More...

bool	ShowPictures ()
	Returns the show pictures Created in NX7.5.0. More...

NXOpen::NXColor *	ShroudColor ()
	Returns the shroud color Created in NX8.0.0. More...

NXOpen::NXColor *	SplitterColor ()
	Returns the splitter color Created in NX8.0.0. More...

bool	StepoverDisplayAsNCM ()
	Returns the stepover move display as non cutting move Created in NX11.0.2. More...

NXOpen::NXColor *	SuspectBoundingBoxColor ()
	Returns the suspect bounding box color Created in NX7.5.0. More...

NXString	TemplateFile ()
	Returns the template file Created in NX7.5.0. More...

NXOpen::NXColor *	TopOffLevelColor ()
	Returns the top off level Created in NX7.5.0. More...

NXOpen::NXColor *	TrimColor ()
	Returns the trim color Created in NX7.5.0. More...

NXOpen::NXColor *	UncutRegionColor ()
	Returns the uncut region color Created in NX7.5.0. More...

bool	UnlinkInstances ()
	Returns the unlink instances Created in NX7.5.0. More...

NXOpen::NXColor *	Visualize2dTool1Color ()
	Returns the tool color1 More...

NXOpen::NXColor *	Visualize2dTool2Color ()
	Returns the tool color2 More...

NXOpen::NXColor *	Visualize2dTool3Color ()
	Returns the tool color3 More...

NXOpen::NXColor *	Visualize2dTool4Color ()
	Returns the tool color4 More...

NXOpen::NXColor *	Visualize2dTool5Color ()
	Returns the tool color5 More...

NXOpen::CAM::Preferences::AnimationAccuracyTypes	VisualizeAnimationAccuracy ()
	Returns the animation accuracy Created in NX7.5.0. More...

NXOpen::NXColor *	VisualizeAutoBlockColor ()
	Returns the auto block color More...

NXOpen::NXColor *	VisualizeBackgroundColor ()
	Returns the background color Created in NX7.5.0. More...

double	VisualizeChordalTolerance ()
	Returns the chordal tolerance Created in NX7.5.0. More...

NXOpen::NXColor *	VisualizeCollisionsColor ()
	Returns the collisions color Created in NX7.5.0. More...

bool	VisualizeDynamicToolAxis ()
	Returns the dynamic tool axis Created in NX8.0.0. More...

NXOpen::NXColor *	VisualizeExcessMaterialColor ()
	Returns the excess material color Created in NX7.5.0. More...

NXOpen::NXColor *	VisualizeGougesColor ()
	Returns the gouges color Created in NX7.5.0. More...

NXOpen::NXColor *	VisualizeIpwColor ()
	Returns the ipw color Created in NX7.5.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor1 ()
	Returns the ipw dmr color1 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor10 ()
	Returns the ipw dmr color10 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor2 ()
	Returns the ipw dmr color2 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor3 ()
	Returns the ipw dmr color3 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor4 ()
	Returns the ipw dmr color4 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor5 ()
	Returns the ipw dmr color5 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor6 ()
	Returns the ipw dmr color6 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor7 ()
	Returns the ipw dmr color7 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor8 ()
	Returns the ipw dmr color8 Created in NX9.0.0. More...

NXOpen::NXColor *	VisualizeIpwDmrColor9 ()
	Returns the ipw dmr color9 Created in NX9.0.0. More...

NXOpen::CAM::Preferences::IpwDmrColoringTypes	VisualizeIpwDmrColoringMode ()
	Returns the ipw dmr coloring mode Created in NX9.0.0. More...

int	VisualizeIpwTranslucency ()
	Returns the ipw translucency Created in NX7.5.0. More...

NXOpen::NXColor *	VisualizeSafeToolColor ()
	Returns the safe tool color Created in NX7.5.2. More...

NXOpen::NXColor *	VisualizeTemporaryContainmentCurveColor ()
	Returns the temporary containment curve color Created in NX7.5.0. More...

double	VisualizeToolAxisTiltTolerance ()
	Returns the tilt tolerance Created in NX7.5.0. More...

NXOpen::NXColor *	VisualizeToolDisplayColor ()
	Returns the tool display color Created in NX7.5.0. More...

bool	VisualizeToolEditAndDisplay ()
	Returns the tool edit and display Created in NX8.0.0. More...

NXOpen::NXColor *	VisualizeToolHolderColor ()
	Returns the tool holder color Created in NX8.0.0. More...

NXOpen::NXColor *	VisualizeToolInsertOrFluteColor ()
	Returns the turning tool insert Created in NX7.5.0. More...

NXOpen::NXColor *	VisualizeToolShankColor ()
	Returns the tool shank color Created in NX8.0.0. More...

int	VisualizeToolTranslucency ()
	Returns the tool translucency Created in NX8.0.0. More...

NXOpen::NXColor *	WallColor ()
	Returns the wall color Created in NX7.5.0. More...

NXOpen::CAM::Preferences::WallSelectionTypes	WallSelection ()
	Returns the wall selection. More...

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder. More...

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder. More...

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit. More...

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder. More...

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results. More...

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called. More...

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a cam preferences Builder
To create a new instance of this class, use NXOpen::CAM::CAMSession::CreateCamPreferences

Created in NX7.5.0.

Member Enumeration Documentation

enum NXOpen::CAM::Preferences::AnimationAccuracyTypes

the animation accuracy types

Enumerator
AnimationAccuracyTypesFine	Fine.
AnimationAccuracyTypesCoarse	Coarse.

enum NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes

the auxiliary floor selection types.

Deprecated:: Deprecated in NX8.0.0. Use SelectionTypes instead.

Enumerator
AuxiliaryFloorColorSelectionTypesBodies	Bodies.
AuxiliaryFloorColorSelectionTypesFaces	Faces.
AuxiliaryFloorColorSelectionTypesSurfaceRegion	Surface Region.

enum NXOpen::CAM::Preferences::BlankSelectionTypes

the blank selection types.

Deprecated:: Deprecated in NX8.0.0. Use SelectionTypes instead.

Enumerator
BlankSelectionTypesBodies	Bodies.
BlankSelectionTypesFaces	Faces.
BlankSelectionTypesCurves	Curves.
BlankSelectionTypesSurfaceRegion	Surface Region.
BlankSelectionTypesFacetedBodies	Faceted Bodies Region.

enum NXOpen::CAM::Preferences::CheckSelectionTypes

the check selection types.

Deprecated:: Deprecated in NX8.0.0. Use SelectionTypes instead.

Enumerator
CheckSelectionTypesBodies	Bodies.
CheckSelectionTypesFaces	Faces.
CheckSelectionTypesCurves	Curves.

enum NXOpen::CAM::Preferences::CsysInformationListingTypes

the information listing types

Enumerator
CsysInformationListingTypesWcs	WCS.
CsysInformationListingTypesMcs	MCS.

enum NXOpen::CAM::Preferences::CutAreaSelectionTypes

the cut area selection types.

Deprecated:: Deprecated in NX8.0.0. Use SelectionTypes instead.

Enumerator
CutAreaSelectionTypesBodies	Bodies.
CutAreaSelectionTypesFaces	Faces.
CutAreaSelectionTypesSurfaceRegion	Surface Region.

enum NXOpen::CAM::Preferences::GeometryTypes

the geometry types

Enumerator
GeometryTypesPart	part
GeometryTypesBlank	blank
GeometryTypesCheck	check
GeometryTypesCutArea	cut area
GeometryTypesAuxiliaryFloor	auxiliary floor
GeometryTypesWalls	walls
GeometryTypesSurfaceAreaDrive	surface area drive geometry

enum NXOpen::CAM::Preferences::IpwDmrColoringTypes

the IPW material removal coloring types

Enumerator
IpwDmrColoringTypesOff	Off.
IpwDmrColoringTypesPerTool	Per Tool.
IpwDmrColoringTypesPerOperation	Per Operation.

enum NXOpen::CAM::Preferences::IpwToleranceModeTypes

the IPW tolerance modes

Enumerator
IpwToleranceModeTypesNeedleDistance	Needle Distance.
IpwToleranceModeTypesNeedleCount	Needle Count.

enum NXOpen::CAM::Preferences::PartSelectionTypes

the part selection types.

Deprecated:: Deprecated in NX8.0.0. Use SelectionTypes instead.

Enumerator
PartSelectionTypesBodies	Bodies.
PartSelectionTypesFaces	Faces.
PartSelectionTypesCurves	Curves.
PartSelectionTypesSurfaceRegion	Surface Region.
PartSelectionTypesFacetedBodies	Faceted Bodies Region.

enum NXOpen::CAM::Preferences::SelectionTypes

the selection types

Enumerator
SelectionTypesNoSelectionFilter	no selection filter
SelectionTypesCurves	curves
SelectionTypesEdges	edges
SelectionTypesFaces	faces
SelectionTypesFeature	feature
SelectionTypesSolidBodies	solid bodies
SelectionTypesSheetBodies	sheet bodies
SelectionTypesFacetBodies	facet bodies
SelectionTypesGroups	groups
SelectionTypesSurfaceRegionFeatures	surface region features

enum NXOpen::CAM::Preferences::WallSelectionTypes

the wall selection types.

Deprecated:: Deprecated in NX8.0.0. Use SelectionTypes instead.

Enumerator
WallSelectionTypesBodies	Bodies.
WallSelectionTypesFaces	Faces.
WallSelectionTypesSurfaceRegion	Surface Region.

Member Function Documentation

bool NXOpen::CAM::Preferences::AlwaysUpdateDialogs ( )

Returns the auto update dialog
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::AutomaticallySetMachingData ( )

Returns the auto maching data
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::AuxiliaryFloorColor ( )

Returns the auxiliary floor
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes NXOpen::CAM::Preferences::AuxiliaryFloorColorSelection ( )

Returns the auxiliary floor selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::BladeBlendColor ( )

Returns the blade blend color
Created in NX8.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::BladeColor ( )

Returns the blade color
Created in NX8.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::BlankColor ( )

Returns the blank color
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::BlankSelectionTypes NXOpen::CAM::Preferences::BlankSelection ( )

Returns the blank selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::CheckColor ( )

Returns the check color
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::CheckSelectionTypes NXOpen::CAM::Preferences::CheckSelection ( )

Returns the check selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::ClearanceColor ( )

Returns the clearance color
Created in NX7.5.0.

License requirements : None

int NXOpen::CAM::Preferences::ClsfDecimals ( )

Returns the clsf_decimals
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::ClsfForceLoadTurret ( )

Returns the force load turret
Created in NX7.5.0.

License requirements : None

NXString NXOpen::CAM::Preferences::ConfigurationFile ( )

Returns the configuration file
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::CsysInformationListingTypes NXOpen::CAM::Preferences::CsysInformationListing ( )

Returns the base info
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::CsysOrientWcsToMcs ( )

Returns the orient wcs to mcs
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::CutAreaColor ( )

Returns the cut area color
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::CutAreaSelectionTypes NXOpen::CAM::Preferences::CutAreaSelection ( )

Returns the cut area selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::DisplaySelectedObjects ( )

Returns the display selected objects
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::DisplayTurningIpw ( )

Returns the display turning ipw
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::DriveColor ( )

Returns the drive color
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::EnableLevelBasedIpw ( )

Returns the enable level based ipw
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::ForceRegenerate ( )

Returns the force regenerate
Created in NX10.0.3.

License requirements : None

bool NXOpen::CAM::Preferences::GeneratePaths ( )

Returns the generate tool paths
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::GenerationFullRegeneration ( )

Returns the full regeneration

Deprecated:: Deprecated in NX10.0.3.

Use CAM::Preferences::GenerationSmartRegeneration instead.

Created in NX9.0.3.

License requirements : None

bool NXOpen::CAM::Preferences::GenerationPauseAfterEachPath ( )

Returns the pause after each path
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::GenerationRefreshBeforeEachPath ( )

Returns the refresh before each path
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::GenerationSmartRegeneration ( )

Returns the smart regeneration
Created in NX10.0.3.

License requirements : None

bool NXOpen::CAM::Preferences::GenerationUpdateInstances ( )

Returns the update all instances
Created in NX7.5.0.

License requirements : None

NXString NXOpen::CAM::Preferences::GetDefaultConfigurationFile ( )

Get the default configuration file.

Returns: Created in NX7.5.0.

License requirements : None

NXString NXOpen::CAM::Preferences::GetDefaultIpwFolder ( )

Get the ipw default folder.

Returns: Created in NX7.5.0.

License requirements : None

NXString NXOpen::CAM::Preferences::GetDefaultTemplateFile ( )

Get the default template file.

Returns: Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::SelectionTypes NXOpen::CAM::Preferences::GetSelection ( NXOpen::CAM::Preferences::GeometryTypes geomType )

The geometry selection type method.

Returns: Created in NX8.0.0.

License requirements : None

Parameters

geomType geomtype

NXOpen::NXColor* NXOpen::CAM::Preferences::HubColor ( )

Returns the hub color
Created in NX8.0.0.

License requirements : None

bool NXOpen::CAM::Preferences::IncludeInstances ( )

Returns the include instances
Created in NX7.5.0.

License requirements : None

int NXOpen::CAM::Preferences::IpwNeedleCountCoarse ( )

Returns the coarse ipw needle count
Created in NX9.0.3.

License requirements : None

int NXOpen::CAM::Preferences::IpwNeedleCountFine ( )

Returns the fine ipw needle count
Created in NX9.0.3.

License requirements : None

int NXOpen::CAM::Preferences::IpwNeedleCountMedium ( )

Returns the medium ipw needle count
Created in NX9.0.3.

License requirements : None

double NXOpen::CAM::Preferences::IpwNeedleDistanceCoarse ( )

Returns the coarse ipw needle distance
Created in NX9.0.3.

License requirements : None

double NXOpen::CAM::Preferences::IpwNeedleDistanceFine ( )

Returns the fine ipw needle distance
Created in NX9.0.3.

License requirements : None

double NXOpen::CAM::Preferences::IpwNeedleDistanceMedium ( )

Returns the medium ipw needle distance
Created in NX9.0.3.

License requirements : None

NXString NXOpen::CAM::Preferences::IpwPartsFolder ( )

Returns the ipw parts folder
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::IpwToleranceModeTypes NXOpen::CAM::Preferences::IpwToleranceMode ( )

Returns the ipw tolerance mode
Created in NX9.0.3.

License requirements : None

bool NXOpen::CAM::Preferences::IpwUseDirectoryOfOriginalPart ( )

Returns the use directory original part
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::LinkMcsRcs ( )

Returns the link mcs rcs
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::OptimizedCutLevelColor ( )

Returns the optimized cut level
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::PartColor ( )

Returns the part color
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::PartSelectionTypes NXOpen::CAM::Preferences::PartSelection ( )

Returns the part selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::RelocateParameters ( )

Returns the relocate parameters
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::ReplayRefreshBeforeEachPath ( )

Returns the refresh before each path replay
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::RunProcessAssistant ( )

Returns the process assistant
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::SaveIpwModel ( )

Returns the ipw model
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::SaveLevelBasedIpw ( )

Returns the level based ipw
Created in NX7.5.0.

License requirements : None

int NXOpen::CAM::Preferences::ScrollAreaSize ( )

Returns the scrollable items
Created in NX7.5.0.

License requirements : None

void NXOpen::CAM::Preferences::SetAlwaysUpdateDialogs ( bool alwaysUpdateDialogs )

Sets the auto update dialog
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

alwaysUpdateDialogs alwaysupdatedialogs

void NXOpen::CAM::Preferences::SetAutomaticallySetMachingData ( bool autoMachingData )

Sets the auto maching data
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

autoMachingData automachingdata

void NXOpen::CAM::Preferences::SetAuxiliaryFloorColor ( NXOpen::NXColor * auxiliaryFloor )

Sets the auxiliary floor
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

auxiliaryFloor auxiliaryfloor

void NXOpen::CAM::Preferences::SetAuxiliaryFloorColorSelection ( NXOpen::CAM::Preferences::AuxiliaryFloorColorSelectionTypes auxiliaryFloorSelection )

Sets the auxiliary floor selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

auxiliaryFloorSelection auxiliaryfloorselection

void NXOpen::CAM::Preferences::SetBladeBlendColor ( NXOpen::NXColor * bladeBlend )

Sets the blade blend color
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

bladeBlend bladeblend

void NXOpen::CAM::Preferences::SetBladeColor ( NXOpen::NXColor * blade )

Sets the blade color
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

blade blade

void NXOpen::CAM::Preferences::SetBlankColor ( NXOpen::NXColor * blankColor )

Sets the blank color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

blankColor blankcolor

void NXOpen::CAM::Preferences::SetBlankSelection ( NXOpen::CAM::Preferences::BlankSelectionTypes blankSelection )

Sets the blank selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

blankSelection blankselection

void NXOpen::CAM::Preferences::SetCheckColor ( NXOpen::NXColor * checkColor )

Sets the check color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

checkColor checkcolor

void NXOpen::CAM::Preferences::SetCheckSelection ( NXOpen::CAM::Preferences::CheckSelectionTypes checkSelection )

Sets the check selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

checkSelection checkselection

void NXOpen::CAM::Preferences::SetClearanceColor ( NXOpen::NXColor * clearanceColor )

Sets the clearance color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

clearanceColor clearancecolor

void NXOpen::CAM::Preferences::SetClsfDecimals ( int decimals )

Sets the clsf_decimals
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

decimals decimals

void NXOpen::CAM::Preferences::SetClsfForceLoadTurret ( bool forceLoadTurret )

Sets the force load turret
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

forceLoadTurret forceloadturret

void NXOpen::CAM::Preferences::SetConfigurationFile ( const NXString & fileName )

Sets the configuration file
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

fileName filename

void NXOpen::CAM::Preferences::SetConfigurationFile ( const char * fileName )

Sets the configuration file
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

fileName filename

void NXOpen::CAM::Preferences::SetCsysInformationListing ( NXOpen::CAM::Preferences::CsysInformationListingTypes baseInfo )

Sets the base info
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

baseInfo baseinfo

void NXOpen::CAM::Preferences::SetCsysOrientWcsToMcs ( bool orientWcsToMcs )

Sets the orient wcs to mcs
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

orientWcsToMcs orientwcstomcs

void NXOpen::CAM::Preferences::SetCutAreaColor ( NXOpen::NXColor * cutAreaColor )

Sets the cut area color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

cutAreaColor cutareacolor

void NXOpen::CAM::Preferences::SetCutAreaSelection ( NXOpen::CAM::Preferences::CutAreaSelectionTypes cutAreaSelection )

Sets the cut area selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

cutAreaSelection cutareaselection

void NXOpen::CAM::Preferences::SetDisplaySelectedObjects ( bool displaySelectedObjects )

Sets the display selected objects
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

displaySelectedObjects displayselectedobjects

void NXOpen::CAM::Preferences::SetDisplayTurningIpw ( bool displayTurningIpw )

Sets the display turning ipw
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

displayTurningIpw displayturningipw

void NXOpen::CAM::Preferences::SetDriveColor ( NXOpen::NXColor * driveColor )

Sets the drive color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

driveColor drivecolor

void NXOpen::CAM::Preferences::SetEnableLevelBasedIpw ( bool enableLevelBasedIpw )

Sets the enable level based ipw
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

enableLevelBasedIpw enablelevelbasedipw

void NXOpen::CAM::Preferences::SetForceRegenerate ( bool isForceRegenerate )

Sets the force regenerate
Created in NX10.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

isForceRegenerate isforceregenerate

void NXOpen::CAM::Preferences::SetGeneratePaths ( bool generatePaths )

Sets the generate tool paths
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

generatePaths generatepaths

void NXOpen::CAM::Preferences::SetGenerationFullRegeneration ( bool fullRegeneration )

Sets the full regeneration

Deprecated:: Deprecated in NX10.0.3.

Use CAM::Preferences::GenerationSmartRegeneration instead.

Created in NX9.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

fullRegeneration fullregeneration

void NXOpen::CAM::Preferences::SetGenerationPauseAfterEachPath ( bool pauseAfterEachPath )

Sets the pause after each path
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

pauseAfterEachPath pauseaftereachpath

void NXOpen::CAM::Preferences::SetGenerationRefreshBeforeEachPath ( bool refreshBeforeEachPath )

Sets the refresh before each path
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

refreshBeforeEachPath refreshbeforeeachpath

void NXOpen::CAM::Preferences::SetGenerationSmartRegeneration ( bool smartRegeneration )

Sets the smart regeneration
Created in NX10.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

smartRegeneration smartregeneration

void NXOpen::CAM::Preferences::SetGenerationUpdateInstances ( bool updateInstances )

Sets the update all instances
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

updateInstances updateinstances

void NXOpen::CAM::Preferences::SetHubColor ( NXOpen::NXColor * hub )

Sets the hub color
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

hub hub

void NXOpen::CAM::Preferences::SetIncludeInstances ( bool includeInstances )

Sets the include instances
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

includeInstances includeinstances

void NXOpen::CAM::Preferences::SetIpwNeedleCountCoarse ( int count )

Sets the coarse ipw needle count
Created in NX9.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

count count

void NXOpen::CAM::Preferences::SetIpwNeedleCountFine ( int count )

Sets the fine ipw needle count
Created in NX9.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

count count

void NXOpen::CAM::Preferences::SetIpwNeedleCountMedium ( int count )

Sets the medium ipw needle count
Created in NX9.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

count count

void NXOpen::CAM::Preferences::SetIpwNeedleDistanceCoarse ( double distance )

Sets the coarse ipw needle distance
Created in NX9.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

distance distance

void NXOpen::CAM::Preferences::SetIpwNeedleDistanceFine ( double distance )

Sets the fine ipw needle distance
Created in NX9.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

distance distance

void NXOpen::CAM::Preferences::SetIpwNeedleDistanceMedium ( double distance )

Sets the medium ipw needle distance
Created in NX9.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

distance distance

void NXOpen::CAM::Preferences::SetIpwPartsFolder ( const NXString & foldername )

Sets the ipw parts folder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

foldername foldername

void NXOpen::CAM::Preferences::SetIpwPartsFolder ( const char * foldername )

Sets the ipw parts folder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

foldername foldername

void NXOpen::CAM::Preferences::SetIpwToleranceMode ( NXOpen::CAM::Preferences::IpwToleranceModeTypes mode )

Sets the ipw tolerance mode
Created in NX9.0.3.

License requirements : cam_base ("CAM BASE")

Parameters

mode mode

void NXOpen::CAM::Preferences::SetIpwUseDirectoryOfOriginalPart ( bool useIpwDirectoryOfOriginalPart )

Sets the use directory original part
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

useIpwDirectoryOfOriginalPart useipwdirectoryoforiginalpart

void NXOpen::CAM::Preferences::SetLinkMcsRcs ( bool linkMcsRcs )

Sets the link mcs rcs
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

linkMcsRcs linkmcsrcs

void NXOpen::CAM::Preferences::SetOptimizedCutLevelColor ( NXOpen::NXColor * optimizedCutLevel )

Sets the optimized cut level
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

optimizedCutLevel optimizedcutlevel

void NXOpen::CAM::Preferences::SetPartColor ( NXOpen::NXColor * partColor )

Sets the part color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

partColor partcolor

void NXOpen::CAM::Preferences::SetPartSelection ( NXOpen::CAM::Preferences::PartSelectionTypes partSelection )

Sets the part selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

partSelection partselection

void NXOpen::CAM::Preferences::SetRelocateParameters ( bool relocateParameters )

Sets the relocate parameters
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

relocateParameters relocateparameters

void NXOpen::CAM::Preferences::SetReplayRefreshBeforeEachPath ( bool refreshBeforeEachPath )

Sets the refresh before each path replay
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

refreshBeforeEachPath refreshbeforeeachpath

void NXOpen::CAM::Preferences::SetRunProcessAssistant ( bool processAssistant )

Sets the process assistant
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

processAssistant processassistant

void NXOpen::CAM::Preferences::SetSaveIpwModel ( bool ipwModel )

Sets the ipw model
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwModel ipwmodel

void NXOpen::CAM::Preferences::SetSaveLevelBasedIpw ( bool levelBasedIpw )

Sets the level based ipw
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

levelBasedIpw levelbasedipw

void NXOpen::CAM::Preferences::SetScrollAreaSize ( int scrollableItems )

Sets the scrollable items
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

scrollableItems scrollableitems

void NXOpen::CAM::Preferences::SetSelection	(	NXOpen::CAM::Preferences::GeometryTypes	geomType,
		NXOpen::CAM::Preferences::SelectionTypes	selection
	)

The geometry selection type method
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

geomType	geomtype
selection	selection

void NXOpen::CAM::Preferences::SetShowPictures ( bool showPictures )

Sets the show pictures
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

showPictures showpictures

void NXOpen::CAM::Preferences::SetShroudColor ( NXOpen::NXColor * shroud )

Sets the shroud color
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

shroud shroud

void NXOpen::CAM::Preferences::SetSplitterColor ( NXOpen::NXColor * splitter )

Sets the splitter color
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

splitter splitter

void NXOpen::CAM::Preferences::SetStepoverDisplayAsNCM ( bool bStepOverAsNCM )

Sets the stepover move display as non cutting move
Created in NX11.0.2.

License requirements : cam_base ("CAM BASE")

Parameters

bStepOverAsNCM bstepoverasncm

void NXOpen::CAM::Preferences::SetSuspectBoundingBoxColor ( NXOpen::NXColor * suspectBoundingBoxColor )

Sets the suspect bounding box color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

suspectBoundingBoxColor suspectboundingboxcolor

void NXOpen::CAM::Preferences::SetTemplateFile ( const NXString & fileName )

Sets the template file
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

fileName filename

void NXOpen::CAM::Preferences::SetTemplateFile ( const char * fileName )

Sets the template file
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

fileName filename

void NXOpen::CAM::Preferences::SetTopOffLevelColor ( NXOpen::NXColor * topOffLevel )

Sets the top off level
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

topOffLevel topofflevel

void NXOpen::CAM::Preferences::SetTrimColor ( NXOpen::NXColor * trimColor )

Sets the trim color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

trimColor trimcolor

void NXOpen::CAM::Preferences::SetUncutRegionColor ( NXOpen::NXColor * uncutRegionColor )

Sets the uncut region color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

uncutRegionColor uncutregioncolor

void NXOpen::CAM::Preferences::SetUnlinkInstances ( bool unlinkInstances )

Sets the unlink instances
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

unlinkInstances unlinkinstances

void NXOpen::CAM::Preferences::SetVisualize2dTool1Color ( NXOpen::NXColor * toolColor )

Sets the tool color1

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::SetVisualizeIpwDmrColor1 instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

toolColor toolcolor

void NXOpen::CAM::Preferences::SetVisualize2dTool2Color ( NXOpen::NXColor * toolColor )

Sets the tool color2

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::SetVisualizeIpwDmrColor2 instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

toolColor toolcolor

void NXOpen::CAM::Preferences::SetVisualize2dTool3Color ( NXOpen::NXColor * toolColor )

Sets the tool color3

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::SetVisualizeIpwDmrColor3 instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

toolColor toolcolor

void NXOpen::CAM::Preferences::SetVisualize2dTool4Color ( NXOpen::NXColor * toolColor )

Sets the tool color4

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::SetVisualizeIpwDmrColor4 instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

toolColor toolcolor

void NXOpen::CAM::Preferences::SetVisualize2dTool5Color ( NXOpen::NXColor * toolColor )

Sets the tool color5

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::SetVisualizeIpwDmrColor5 instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

toolColor toolcolor

void NXOpen::CAM::Preferences::SetVisualizeAnimationAccuracy ( NXOpen::CAM::Preferences::AnimationAccuracyTypes animationAccuracy )

Sets the animation accuracy
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

animationAccuracy animationaccuracy

void NXOpen::CAM::Preferences::SetVisualizeAutoBlockColor ( NXOpen::NXColor * autoBlockColor )

Sets the auto block color

Deprecated:: Deprecated in NX8.5.0.

Use CAM::Preferences::SetBlankColor instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

autoBlockColor autoblockcolor

void NXOpen::CAM::Preferences::SetVisualizeBackgroundColor ( NXOpen::NXColor * backgroundColor )

Sets the background color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

backgroundColor backgroundcolor

void NXOpen::CAM::Preferences::SetVisualizeChordalTolerance ( double chordalTolerance )

Sets the chordal tolerance
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

chordalTolerance chordaltolerance

void NXOpen::CAM::Preferences::SetVisualizeCollisionsColor ( NXOpen::NXColor * collisionsColor )

Sets the collisions color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

collisionsColor collisionscolor

void NXOpen::CAM::Preferences::SetVisualizeDynamicToolAxis ( bool dynToolAxis )

Sets the dynamic tool axis
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

dynToolAxis dyntoolaxis

void NXOpen::CAM::Preferences::SetVisualizeExcessMaterialColor ( NXOpen::NXColor * excessMaterialColor )

Sets the excess material color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

excessMaterialColor excessmaterialcolor

void NXOpen::CAM::Preferences::SetVisualizeGougesColor ( NXOpen::NXColor * gougesColor )

Sets the gouges color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

gougesColor gougescolor

void NXOpen::CAM::Preferences::SetVisualizeIpwColor ( NXOpen::NXColor * ipwColor )

Sets the ipw color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor1 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color1
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor10 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color10
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor2 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color2
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor3 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color3
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor4 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color4
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor5 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color5
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor6 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color6
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor7 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color7
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor8 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color8
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColor9 ( NXOpen::NXColor * ipwColor )

Sets the ipw dmr color9
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwColor ipwcolor

void NXOpen::CAM::Preferences::SetVisualizeIpwDmrColoringMode ( NXOpen::CAM::Preferences::IpwDmrColoringTypes coloring )

Sets the ipw dmr coloring mode
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

coloring coloring

void NXOpen::CAM::Preferences::SetVisualizeIpwTranslucency ( int ipwTranslucency )

Sets the ipw translucency
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

ipwTranslucency ipwtranslucency

void NXOpen::CAM::Preferences::SetVisualizeSafeToolColor ( NXOpen::NXColor * safeToolColor )

Sets the safe tool color
Created in NX7.5.2.

License requirements : cam_base ("CAM BASE")

Parameters

safeToolColor safetoolcolor

void NXOpen::CAM::Preferences::SetVisualizeTemporaryContainmentCurveColor ( NXOpen::NXColor * temporaryContainmentCurveColor )

Sets the temporary containment curve color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

temporaryContainmentCurveColor temporarycontainmentcurvecolor

void NXOpen::CAM::Preferences::SetVisualizeToolAxisTiltTolerance ( double tiltTolerance )

Sets the tilt tolerance
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

tiltTolerance tilttolerance

void NXOpen::CAM::Preferences::SetVisualizeToolDisplayColor ( NXOpen::NXColor * toolDisplayColor )

Sets the tool display color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

toolDisplayColor tooldisplaycolor

void NXOpen::CAM::Preferences::SetVisualizeToolEditAndDisplay ( bool toolDisplayColor )

Sets the tool edit and display
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

toolDisplayColor tooldisplaycolor

void NXOpen::CAM::Preferences::SetVisualizeToolHolderColor ( NXOpen::NXColor * holderColor )

Sets the tool holder color
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

holderColor holder color

void NXOpen::CAM::Preferences::SetVisualizeToolInsertOrFluteColor ( NXOpen::NXColor * color )

Sets the turning tool insert
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

color color

void NXOpen::CAM::Preferences::SetVisualizeToolShankColor ( NXOpen::NXColor * shankColor )

Sets the tool shank color
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

shankColor shank color

void NXOpen::CAM::Preferences::SetVisualizeToolTranslucency ( int toolTranslucency )

Sets the tool translucency
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

toolTranslucency tooltranslucency

void NXOpen::CAM::Preferences::SetWallColor ( NXOpen::NXColor * wallColor )

Sets the wall color
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

wallColor wallcolor

void NXOpen::CAM::Preferences::SetWallSelection ( NXOpen::CAM::Preferences::WallSelectionTypes wallSelection )

Sets the wall selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

wallSelection wallselection

bool NXOpen::CAM::Preferences::ShowPictures ( )

Returns the show pictures
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::ShroudColor ( )

Returns the shroud color
Created in NX8.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::SplitterColor ( )

Returns the splitter color
Created in NX8.0.0.

License requirements : None

bool NXOpen::CAM::Preferences::StepoverDisplayAsNCM ( )

Returns the stepover move display as non cutting move
Created in NX11.0.2.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::SuspectBoundingBoxColor ( )

Returns the suspect bounding box color
Created in NX7.5.0.

License requirements : None

NXString NXOpen::CAM::Preferences::TemplateFile ( )

Returns the template file
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::TopOffLevelColor ( )

Returns the top off level
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::TrimColor ( )

Returns the trim color
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::UncutRegionColor ( )

Returns the uncut region color
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::UnlinkInstances ( )

Returns the unlink instances
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool1Color ( )

Returns the tool color1

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::VisualizeIpwDmrColor1 instead.

Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool2Color ( )

Returns the tool color2

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::VisualizeIpwDmrColor2 instead.

Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool3Color ( )

Returns the tool color3

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::VisualizeIpwDmrColor3 instead.

Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool4Color ( )

Returns the tool color4

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::VisualizeIpwDmrColor4 instead.

Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::Visualize2dTool5Color ( )

Returns the tool color5

Deprecated:: Deprecated in NX9.0.0.

Use CAM::Preferences::VisualizeIpwDmrColor5 instead.

Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::AnimationAccuracyTypes NXOpen::CAM::Preferences::VisualizeAnimationAccuracy ( )

Returns the animation accuracy
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeAutoBlockColor ( )

Returns the auto block color

Deprecated:: Deprecated in NX8.5.0.

Use CAM::Preferences::BlankColor instead.

Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeBackgroundColor ( )

Returns the background color
Created in NX7.5.0.

License requirements : None

double NXOpen::CAM::Preferences::VisualizeChordalTolerance ( )

Returns the chordal tolerance
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeCollisionsColor ( )

Returns the collisions color
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::VisualizeDynamicToolAxis ( )

Returns the dynamic tool axis
Created in NX8.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeExcessMaterialColor ( )

Returns the excess material color
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeGougesColor ( )

Returns the gouges color
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwColor ( )

Returns the ipw color
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor1 ( )

Returns the ipw dmr color1
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor10 ( )

Returns the ipw dmr color10
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor2 ( )

Returns the ipw dmr color2
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor3 ( )

Returns the ipw dmr color3
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor4 ( )

Returns the ipw dmr color4
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor5 ( )

Returns the ipw dmr color5
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor6 ( )

Returns the ipw dmr color6
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor7 ( )

Returns the ipw dmr color7
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor8 ( )

Returns the ipw dmr color8
Created in NX9.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeIpwDmrColor9 ( )

Returns the ipw dmr color9
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::Preferences::IpwDmrColoringTypes NXOpen::CAM::Preferences::VisualizeIpwDmrColoringMode ( )

Returns the ipw dmr coloring mode
Created in NX9.0.0.

License requirements : None

int NXOpen::CAM::Preferences::VisualizeIpwTranslucency ( )

Returns the ipw translucency
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeSafeToolColor ( )

Returns the safe tool color
Created in NX7.5.2.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeTemporaryContainmentCurveColor ( )

Returns the temporary containment curve color
Created in NX7.5.0.

License requirements : None

double NXOpen::CAM::Preferences::VisualizeToolAxisTiltTolerance ( )

Returns the tilt tolerance
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeToolDisplayColor ( )

Returns the tool display color
Created in NX7.5.0.

License requirements : None

bool NXOpen::CAM::Preferences::VisualizeToolEditAndDisplay ( )

Returns the tool edit and display
Created in NX8.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeToolHolderColor ( )

Returns the tool holder color
Created in NX8.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeToolInsertOrFluteColor ( )

Returns the turning tool insert
Created in NX7.5.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::VisualizeToolShankColor ( )

Returns the tool shank color
Created in NX8.0.0.

License requirements : None

int NXOpen::CAM::Preferences::VisualizeToolTranslucency ( )

Returns the tool translucency
Created in NX8.0.0.

License requirements : None

NXOpen::NXColor* NXOpen::CAM::Preferences::WallColor ( )

Returns the wall color
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::Preferences::WallSelectionTypes NXOpen::CAM::Preferences::WallSelection ( )

Returns the wall selection.

Deprecated:: Deprecated in NX8.0.0. Use CAM::Preferences::GetSelection and CAM::Preferences::SetSelection instead.

Created in NX7.5.0.

License requirements : None

The documentation for this class was generated from the following file:

CAM_Preferences.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation