Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX7.5.0. More...

Inheritance diagram for NXOpen::CAM::NcmHoleMachiningEngRet:

Public Types
enum	EngRetTypes { EngRetTypesSameAsDefault, EngRetTypesSameAsEngage, EngRetTypesHelical, EngRetTypesLinear, EngRetTypesCircular, EngRetTypesNone, EngRetTypesMinimumClearance }
	Available types for engage/retract in Planar Milling. More...

Public Member Functions
NXOpen::CAM::NcmHoleMachiningEngRet::EngRetTypes	EngRetType ()
	Returns the type of engage/retract Created in NX7.5.0. More...

NXOpen::CAM::InheritableToolDepBuilder *	Height ()
	Returns the engage/retract height builder Created in NX7.5.0. More...

NXOpen::CAM::InheritableToolDepBuilder *	MinClearance ()
	Returns the engage/retract min clearance builder Created in NX7.5.0. More...

void	SetEngRetType (NXOpen::CAM::NcmHoleMachiningEngRet::EngRetTypes engRetType)
	Sets the type of engage/retract Created in NX7.5.0. More...

void	SetStartFromCenter (bool startFromCenter)
	Sets the engage/retract start at arc center Created in NX7.5.0. More...

bool	StartFromCenter ()
	Returns the engage/retract start at arc center Created in NX7.5.0. More...

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	Tag () const
	Returns the tag of this object. More...

Detailed Description

Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX7.5.0.

Member Enumeration Documentation

Available types for engage/retract in Planar Milling.

Enumerator
EngRetTypesSameAsDefault	Same as Default (Inherit)
EngRetTypesSameAsEngage	Same as Engage.
EngRetTypesHelical	Helical.
EngRetTypesLinear	Linear.
EngRetTypesCircular	Circular.
EngRetTypesNone	None.
EngRetTypesMinimumClearance	Minimum Clearance.

NXOpen::CAM::NcmHoleMachiningEngRet::EngRetTypes NXOpen::CAM::NcmHoleMachiningEngRet::EngRetType ( )

Returns the type of engage/retract
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmHoleMachiningEngRet::Height ( )

Returns the engage/retract height builder
Created in NX7.5.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmHoleMachiningEngRet::MinClearance ( )

Returns the engage/retract min clearance builder
Created in NX7.5.0.

License requirements : None

void NXOpen::CAM::NcmHoleMachiningEngRet::SetEngRetType ( NXOpen::CAM::NcmHoleMachiningEngRet::EngRetTypes engRetType )

Sets the type of engage/retract
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

engRetType the new value

void NXOpen::CAM::NcmHoleMachiningEngRet::SetStartFromCenter ( bool startFromCenter )

Sets the engage/retract start at arc center
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

startFromCenter the start from center

bool NXOpen::CAM::NcmHoleMachiningEngRet::StartFromCenter ( )

Returns the engage/retract start at arc center
Created in NX7.5.0.

License requirements : None

The documentation for this class was generated from the following file: